Belec Vario Lab: High-Performance Spectrometer For Metal Analysis
Belec Vario Lab: High-Performance Spectrometer For Metal Analysis
Belec Vario Lab: High-Performance Spectrometer For Metal Analysis
Specifications
highest analysis accuracy maximum measuring value stability can be adjusted to almost any kind of problem low detection limits robust laboratory spectrometer flexibility through manifold equipment possibilities free accessible sparking stand for bigger samples installation and instruction by qualified personnel additional sparking porbes
Universally Applicable
A sparking probe can expand the function of the instrument, additionally. For the analysis of big, bulky or indestructible samples, you can use one of our sparking probes. Like this, the Belec Vario Lab covers most fields of activity and can be a reliable companion for different applications.
Non-Destructive Testing
The sparking stand of the Belec Vario Lab is freely accessible from three sides which enables non-destructive material testing from even huge and bulky specimens.
Technical Data:
Optics spectrometer in Paschen-Runge mounting Rowland circle diameter 500mm usable wavelengths 120-430 nm grating 3600 lines/mm reciprocal dispersion 0,52 nm/mm (1st order) shock resistance photomultiplier detector systems are 0.1 C temperature stabilised for excellent long-term stability optionally up to two spectrometer optics in the same instrument up to 11 bases and 108 measuring channels possible inert gas-breathed optical housing with gas purifier system optional optic with usable wavelengths up to 800 nm Vacuum System (optional) pump integrated in lower cabinet large oil separator oil vapour trap vacuum gauge in front panel Source sparking generator with maximum 400 Hz frequency unipolar discharge separate parameter for pre-sparking and integration selectable via software ignition frequency program specifically selectable via software discharge power program specifically selectable via software arc source for air probe, optional ignition voltage 20 kV Measuring Stand argon-flushed measuring stand for exact analysis sparking stand grounded with 10mm analysis opening, optionally with ceramic insert for samples of 4mm minimum adapters for wires, pipes and small parts are available low-wear tungsten electrode pneumatic sample clamping argon flow 0,1 l/min in stand-by mode and 2 l/min during analysis low maintenance effort Probes argon-flushed sparking probe for exact analysis, including carbon argon flow 0,1 l / min in standby and 2,5 l / min when analysing argon control on cable socket air probe for quick mix-up checking adapters for wires, pipes and small parts available for all probes lightweight shockproof plastic probe housing start and clear buttons easily hand-operated signal on mix-up identification: visual display for repeat and reject, start button is blocked until confirm button is pressed multi fibre quartz optics, standard lengths 3m or 5m low-wear tungsten electrode silver electrode for air probe probe connector system Electronics stabilised high voltage zero-stabilised analogue amplifier 6-decade dynamic A-D converter for each channel 48 channels with digital integration, configurable for several bases Dimensions width 24.8 in. (630 mm) height 22.6 in. (575 mm) depth 27.6 in.(1220 mm) plus 4.5 in. (155 mm) for sparking stand Weight analysis unit argon probe special probe lower cabinet 220.0 lbs. (100 kg) 2.1 lbs. (0,95 kg) 2.5 lbs. (1,15 kg) 145.5 lbs. (66 kg)
Power Supply 230V/50Hz or 110V/60Hz 100 W in stand-by mode 600 W during analysis 600 W in stand-by mode with opt. vacuum system 1100 W during analysis with opt. vacuum system Computer Hardware system-integrated industrial computer system Intel Celeron M (1.50 GHz) 1 GB RAM 2.5 hard disk 60 GB minimum 15 internal TFT colour display special dust and moisture protected integrated keyboard (or external) USB 2.0 ports Ethernet interface
Belec Spektrometrie Opto-Elektronik GmbH Hamburger Str. 12 49124 Georgsmarienhtte Deutschland / Germany Fon +49 5401 8709-0 Fax +49 5401 8709-28 info@belec.de www.belec.de
Zertifiziertes Management-System
DI NE 08 N ISO 9001: 20
Reg.-Nr.: Q1 0310014