Computer Networks and Communications

SMK Bukit Saujana 2009
COMPUTER NETWORKS
AND COMMUNICATIONS
LESSON 67
INTRODUCTION TO COMPUTER NETWORKS AND
COMMUNICATIONS
COMPUTER NETWORK
A computer network is a system of interconnected computers and peripheral

devices. For example, it may connect computers, printers, scanners and
cameras.
151
Using hardware and software, these interconnected computing devices can
communicate with each other through defined rules of data communications.
In a network, computers can exchange and share information and resources.
A computer network may operate on wired connections or wireless

connections.
When two or more networks are linked or connected and are able to
communicate with one another using suitable hardware and software, it is
called an internetwork.
152
COMMUNICATIONS
Communications is about the
transfer of information from a
sender, across a distance, to a
receiver.
Using electricity, radio waves or

light, information and data in the
form of codes are transmitted
through a physical medium such as
wire, cable, or even the atmosphere.
The information that is transmitted

(sent) can be text, voice, sound,
video, graphics and images, or a
combination of all these, which we
call multimedia.
We transmit information or data by

using two types of signals, namely
analog and digital.
Computers communicate with digital

signals. The older forms of communications technology, such as telephones
and radios, use analog signals.
153
Therefore, in order to make
communications possible from
computers, across telephones
and radios and back to computers
and other digital devices again,
there must be a signal translator,
which we call – a modem.
The modem, which is short for

modulator or demodulator,
converts digital signals into
analog and back again into
digital signals for information to
move across the telephone line.
CONNECTIONS FOR NETWORKING

Communications among computing
devices in a network can only
happen through defined rules of
communications and connections. In
general, for communications in a
network to be possible, there must
be:
• a physical medium – to allow
data to travel across it from
device to device
• a set of rules called protocols
to ensure that interconnected
computing devices have the
same standards for exchange
of information to occur
smoothly.
• a system application for
managing network information
flow to ensure that data transmission sent from one device is
received by the intended receiver.
If any of these levels of connectivity

is missing, communications for
networking will not be possible.
For example, if the physical medium
is cut off, there will be no
communications.
154
If protocol between interconnected
devices are not the same, data
transmission will not be ‘understood’
between devices. If there is no
network management application
available, there will be no means of
ensuring that information from one
device will be sent to the correct
receiving device.
Protocol
Often simply referred to as a protocol, a communications protocol is a set of
rules or standards designed so that computers can exchange information
with a minimal errors.
LESSON 68
COMPONENTS OF COMMUNICATIONS
INTRODUCTION
In order for a network to properly operate, two categories of network

communications components are needed; ‘Hardware’ and ‘Software’.
Computers, hub, switch, router,

network interface cards and both
wired and wireless communications
media fall under the ‘Hardware’
category.
155
Operating systems and applications fall

under the ‘Software’ category.
NETWORK COMMUNICATION CHANNELS

Signals which carry information
in a communications system
travel through a physical
medium.
This physical medium is called

a communications channel, or at
other times a communications
link, a communications line, or
a communications medium.
Some common types of network

communications channels are
the:
• twisted-pair wire
• coaxial cable
• fiber-optic cable
• satelite systems
• wireless systems (namely using radiowaves, microwaves and
infrared)
Communications channels provide the most basic level of

connectivity medium for a network.
156
NETWORK INTERFACE CARDS AND NETWORKING

DEVICES
The Network Interface Card or NIC is one of the most
important communications devices for a PC.
The NIC provides connection

between the computer and the
network’s communications media.
This connection is necessary because

the NIC functions as a data conversion
device to move data from the PC’s
system to the network medium and
vice versa.
The Network Interface Card also

supplies the basic addressing system
used to get data from PC to PC across a
network.
The other hardware component that is

required for communications to work
on a network is the networking device,
such as the hub, switch, router and
even the modem.
The function of these devices is

generally to control the flow of data on
a network.
157
NETWORK SOFTWARE
How do computers communicate on a network?
Once we have got the necessary hardware set up for a network, we will need
to have suitable software on the network computers that would be able to
provide some basic functions, such as connecting to other
computers on the network, sharing resources and files and
providing for network security for users who are online.
In general, a network software must be able to handle

networking protocols and connections within the network and with other
networks. Most importantly, it should also provide file systems functions to
organise disk space on the network computers for sharing purposes.
Since most computer networks are connected to the Internet, a network

software must have some form of management and security services to
protect the network as well as computers on the network, from
unauthorised access.
158
LESSON 69
APPLICATION SOFTWARE: ADVANCED FEATURES OF
PRESENTATION SOFTWARE
Networking and communications technology is fast changing the way people

view society and how we plan our daily social activities.
Through networking technology alone, many today are

finding friends online, visiting a library in another
country. Some people are able to go to the banks after
they are closed, as well as getting the latest
development in news from within and outside the
country.
Mobile communications today is also based on the

networking technology. Surfing the internet is not only
limited to the desktop computer users but also those
who have mobile phones with wireless technology. At
present there are more than 7 million such users
across the world.
The internet has helped science and medical research

progress further as doctors and researchers from
anywhere in the world can contribute and cooperate in
any problem brought to their attention. Technological
solutions can be discovered quickly as individuals
come forward to offer their help through the internet.
Homemakers, students, teachers, business people,

and almost anyone with access to networked
computer go online and continue their path of lifelong
education anywhere, anytime.
Organisations and individuals can make connections

and establish communications within seconds with
people nearby or overseas. Online communities can be
formed and important issues and opinions to difficult
problems can be discussed without a threatening
environment.
All these are now possible because of networks and communications

technology.
159
IMPORTANCE OF NETWORKS AND

COMMUNICATIONS
Information is now made easy with the availability of network
communications.
In a clinic for example, network communications

plays an important part in keeping patients’
database for easy retrieval. Unlike in conventional
practice, doctors and nurses have to look for a
patient’s personal file from hundreds or maybe
thousands of records. With network
communication, the clinic saves time and
manpower allocation can be effectively planned.
E-Business
E-business or electronic business refers to
conducting business transactions on the
internet, not only limited to buying and selling
but also servicing customers and collaborating
with business partners.
E-business supports many types of business

transactions, including online shopping, selling
and renting. Users can browse the website and
choose from the list of items or services to
buy. Payment is usually via credit card.
160
Online Education
With a network connections, online
education is made possible.
Students at any location around the
world can participate in an online
classroom, download tutorial
questions and submit their
assignments.
E-Banking
E-banking or electronic banking is the most
popular banking facility nowadays. It handles
all types of banking transactions like account
management, fund transfer and payments
primarily over the internet.
User can pay bills, check the account balance

and transfer money to other parties, using e-
banking facilities twenty four hours a day and
seven days a week.
With e-banking, most of the transactions can

be done at home or from the office, thus users
save time on traveling and queuing at the bank
counters.
Long Distance Communication

Long distance communication is made easy via
network availability. Communication is possible
via voice, text or video. The cost of having this
type of communication is cheaper than making
a normal phone call and definitely faster and
more effective than corresponding via letters of
fax.
In business, important decisions can effectively

made through video conference meeting.
161
LESSON 70
TYPES OF NETWORKS
TYPES OF NETWORKS
Three types of networks:
• Local Area Network or LAN
• Metropolitan Area Network or MAN
• Wide Area Network or WAN
Here:
• LAN - the email system within the school lab in SMK KL
• MAN - the email system within KL city
• WAN - the email system between KL and London
A LAN covers a small region of space, typically a single building.
A MAN is a collection of LANs with the same geographical area, for instance a
city.
A WAN can be a collection of LANs or MANs or the mix of two with a very
large geographical area, for instance a country or even beyond the border.
LESSON 71
LOCAL AREA NETWORK (LAN)
162
Local Area Network (LAN) is the smallest network compared to the other two
networks.
The simplest form of LAN is to connect two computers together.
LAN is operated within a limited physical area, such as at home, school, a

single building or several buildings.
A network which consists of less

than 500 interconnected devices
across several buildings, is still
recognised as a LAN.
Inexpensive hardware used in LAN previously include

twisted pair, coaxial cables and the higher end is fiber
optic or wireless. However, coaxial cables are now
being replaced by a higher speed cabling system
such as CAT5 using RJ45 connectors.
LAN is a very high speed network (from previously

10Mbps) to 100Mbps, which is faster than MAN and WAN.
Local Area
Network is a
group of computers and
network devices connected
together, usually within the
same building.
LESSON 72
METROPOLITAN AREA NETWORK
(MAN)
First, you have to understand the word

metropolitan. Metropolitan describes
163
important cities such as Kuala Lumpur, Manila, Singapore, Tokyo, London and
New York.
MAN is a network of computers located at different sites within a large

physical area, such as a city. Companies that have several branches within
the Kuala Lumpur city such as banks, might find a MAN useful to them.
In this case, setting up a MAN across long

distances can be best connected using fiber
optics. Sometimes, a MAN can be a collection of
several LANs within the same city.
MAN often acts as a high speed network

(although not as fast as a LAN) to allow
sharing of regional resources.
MAN can be
defined as a group
of computers and
network devices
connected
together within a
large physical
area.
LESSON 73
WIDE AREA NETWORK (WAN)
Wide Area Network (WAN) is the largest network

of all network types. The Internet is the largest
WAN in the world. WAN generally covers large
distances such as states, countries or
continents.
An example in the society using WAN is the

banking organisation. Local banks have always
maintained their business online by connecting
all computers of their branches in the countries.
International banks also use WAN to connect
their computers all over the world.
164
Actually, WAN is a group of MANs or LANs or the mixture of both networks.
A device called a router is

needed to connect the MANs
and LANs all over a large
physical area. A router is a
special networking device
that connects two or more
different networks and keeps
data flowing between them.
A router makes all the different networks communicate,

such as connecting LAN to LAN, LAN to WAN or WAN to
WAN.
The transmission media in WAN uses the fibre optic

cable.WAN is still considered a fast network with speeds
20 – 2000 Kbps, but slower than LAN and MAN.
LESSON 74
DIFFERENCES BETWEEN TYPES OF NETWORK
SETTING UP COST
Setting up a MAN network is more expensive than a LAN
but less than a WAN. Managers have to consider the cost
of buying the necessary hardware, software, medium and
maintenance service for the desired network.
NETWORK SIZE
The network size of a MAN falls between LAN
and WAN. As you know, a LAN usually covers
only a limited area such as a school lab; a MAN
will cover a greater area such as a city while a
WAN will cover the largest geographical area
such as the size of Malaysia.
165
SPEED
LAN offers the best speed in transmitting information
followed by MAN and WAN. In addition, LANs are
capable of transmitting data at very fast rates, much
faster than data which is transmitted over a
telephone line although the distances are limited.
LAN is also frequently used to provide a shared

connection to other networks using a link to a WAN.
A MAN often acts as a high speed network to allow

sharing of regional resources (similar to a large LAN). For larger network
coverage, MAN is a better choice for a higher speed connection compared to
a WAN.
TRANSMISSION MEDIA
A LAN uses the cheapest transmission media
compared to MAN and WAN. Generally LAN only uses
communication media such as twisted-pair cables.
A MAN might have more than one transmission media since it involves a
combination of two or more LANs and the media used depends on the
network coverage. Here, a MAN might use the twisted-pair and fibre-optics
cables.
A WAN might use costly

transmission medias such as
fibre-optics, radio waves and
satellites, depending on their
coverage.
166
CONNECTION LIMIT
The number of computers that can be attached to a single LAN is limited.
A MAN can have a large number of computers compared to a LAN but less
than a WAN.
A WAN can have up to billions of computers attached to it.
COMPARISON OF LAN, MAN AND WAN
LESSON 75
NETWORK ARCHITECTURE
TYPES OF NETWORK
ARCHITECTURE
Network architecture is the
overall design of a computer
167
network that describes how a computer network is configured and what
strategies are being used.
Network architecture mainly focuses on the functions of the networks.

Network architecture is also known as network model or network design.
There are two main network architectures:

• client/server network
• peer-to-peer network
CLIENT/SERVER NETWORK
A client/server network is a network
in which the shared files and
applications are stored in the server
but network users (clients) can still
store files on their individual PCs.
A server is a computer that shares

information and resources with other
computers on a network. A client is
a computer which requests services
or files from a server computer.
PEER-TO-PEER NETWORK
Peer-to-peer or P2P network is a
network with all the nodes acting as
both servers and clients. A PC can
access files located on another PC and
can also provide files to other PCs.
All computers in the peer-to-peer

network has equal responsibilities and
capabilities to use the resources
available on the network.
168
With peer-to-peer network, no server is needed; each computer in the
network is called a peer.
LESSON 76
CLIENT / SERVER
CLIENT / SERVER NETWORK

On a client/server network, shared files and
applications are stored in the server but network users
can still store files on their individual PCs.
A smaller client/server network uses twisted-pair or

coaxial cables for networking but a larger and
powerful network will use fibre optics. A client/server
network is suitable for connecting 10 or more
computers.
To set up a client/server network, you need to install

a server program for the server and a client program
for the clients. A network administrator needs to
configure access rights on the server side to allow
access for the clients to use the resources.
An email program is an example

of a client program, as it sends
email requests to a mail server.
IRC (Internet Relay Chat),

Internet browser and email
program are examples of
software applications for a
client/server network.
SERVER
A server is sometimes called a
host computer. A server is a
computer that provides
services to other computers
called clients. A server controls
access to the hardware,
software and other resources
on the network.
It provides a centralised
storage area for programs,
data and information.
169
DEDICATED SERVER
Dedicated servers perform specific tasks and usually execute only one job.
For example, a file server stores and

manages files, a print server manages
printers and print jobs. A database server
stores and provides access to a database.
A network server manages network traffic.
A dedicated server helps save

time and storage space in one
computer. It will not put the
whole network at risk if it fails.
CLIENT
The client computers are computers on the
network that rely on the server for its
resources and services.
Client computers send requests to a server

for resources or services to perform their
job. For example, a client computer can
send a request asking permission to use the
printer attached to the server, to print a
document.
170
Usually a client computer has to log onto
the network using a user name and
password to use the server’s resources and
services.
For example, you have to be a TMnet or

Jaring member to use the internet service.
You need to logon to TMnet or Jaring’s
server by sending your username and
password.
After your
successful
login process,
then you can
access the
internet
through TMnet
or Jaring’s
server.
LESSON 77
PEER-TO-PEER
PEER-TO-PEER FUNCTIONS
Peer-to-peer (P2P) network is a
network with all the nodes
acting as both servers and
clients. A PC can access files
located on another PC and can
also provide files to other PCs.
A P2P network usually uses

twisted-pair or coaxial cable
because these cables are
cheaper and easier to work
with.
P2P network is the best choice

to set up a network with less
than 10 computers.
171
P2P network is easier to manage as
long as there are network cards
installed on the PCs and connection
can be done with a network cable.
To share the resources, each PC
must have the necessary program.
There is no central server or central

router managing a P2P network.
Wireless networking can be an

example of a P2P network as
you only need a wireless card,
connect it to an existing wireless
network and resources can be
shared
Limewire, Bearshare and Kazaa are

all examples of software applications
for peer-to-peer (P2P) file sharing.
172
THE DIFFERENCES BETWEEN CLIENT/SERVER AND
PEER-TO-PEER
LESSON 78
NETWORK TOPOLOGY
Now, imagine replacing the dinner table as your

network, and the chairs are your computers. How
would you like your network to be? How would
you arrange the computers?
In networking terms, the structure you are

planning to connect the computers to, is called
network topology.
Network topology is also

referred to as the configuration
of a network.
It usually refers to the physical

arrangement of the computers
and other networking devices
that are linked together.
173
It defines how nodes are connected to one
another in a communication network. A network
topology must show the nodes and the links
between them. The nodes must be an active
device connected to the network, such as a
computer, printer, hub or a router.
To see a network topology clearly, always apply it on a Local Area Network

(LAN). According to the needs, there are three main types of network
topology. They are bus topology, star topology and ring topology.
Bus Topology
Star Topology
Ring Topology
174
LESSON 79
BUS TOPOLOGY
In communications technology, you think of a

bus as a common “highway” on which data is
transmitted. A bus refers to the main physical
pathway or central cable where all other
devices are connected to it. Like a major motor
highway, all traffic flow will be affected if this
main “road” is broken.
A bus topology consists of a single central cable to which all computers and
other devices connect. A bus topology is also known as a bus network.
DESCRIPTION OF BUS TOPOLOGY

Bus networks are very common in Local
Area Networks (LAN). A bus network
must have a common backbone (the
central cable) to connect all devices.
All nodes share the backbone to

communicate with each other on the
network. Sometimes, a bus network
has more than one server. Sometimes, a
server is not needed on the network.
175
DEPENDENCE OF A BUS TOPOLOGY

If one of the nodes fails, the bus network would still function as long as the
backbone is working. If the backbone fails, the network will fail to function.
176
ADVANTAGES OF BUS TOPOLOGY
• Easy implementation. New devices can be added to the backbone or to

the existing nodes.
• Failure of a node doesn't affect the entire LAN.
• No disruptions to the network when connecting or removing devices.
• Network can easily be extended, by adding new devices to the
backbone or existing nodes.
DISADVANTAGES OF BUS TOPOLOGY

• If the backbone fails, the entire bus network will be affected.
• Network speed decreases when the number of nodes increases.
• Troubleshooting is difficult when one of the nodes fails.
LESSON 80
RING TOPOLOGY
A ring topology consists of all computers and

other devices that are connected in a loop.
Ring topology is also known as a ring network.
A ring network can be found in Local Area

Networks. In a ring network each node
directly connect to two neighbouring nodes.
A server may exist in a ring network, but it will
not connect to all the nodes in the network.
The server, like other nodes, will

only communicate to its two
neighbouring nodes.
177
DEPENDENCE OF A RING TOPOLOGY
If one of the nodes fails, the network will fail to
function.
ADVANTAGES OF A RING TOPOLOGY
Troubleshooting is easy when one of the nodes fails.

Repair or remove the failing nodes and the network
will continue to function.
DISADVANTAGES OF A RING TOPOLOGY

• Implementation is difficult.
Network administrator has to
terminate the entire network to
install a new node between
existing nodes.
• A failing node will affect the
entire LAN.
• Connecting or removing devices
is difficult because network administrator needs to terminate the
network in order to do it.
• Network speed decreases when the number of nodes increases.
LESSON 81
STAR TOPOLOGY
In the early days of computer

networking, all computers were
connected to a centralised mainframe
computer.
All resources and management of

information were centred in this main
computer.
The idea of a centralised mainframe

computer is where the basic concept of a
star topology comes from.
178
A star topology consists of a central host which acts as the centre, and all
nodes connect to the host. A star topology is also known as star network.
DESCRIPTION OF STAR TOPOLOGY

• A star network is found in a Local Area Network setting.
• A star network must have a host which acts as the centre.
• The host can be a server, hub or router.
• In a star network, every node will not connect to the neighbouring
nodes.
• Every node must connect to the host in order to communicate.
• The host will control the flow of communication in the network.
DEPENDENCE OF A STAR TOPOLOGY

If one of the nodes fails, the star network can still
function as long as the host is working.
If the host fails, the network will

fail to function.
179
ADVANTAGES AND DISADVANTAGES OF STAR

TOPOLOGY
Advantages
• It is easy to implement. You only add nodes to

the host.
• The failure of a node does not affect the entire
LAN.
• There are no disruptions to the network when
connecting or removing devices.
• The network can be extended by adding new
devices to the host or nodes.
• Troubleshooting is easy when the host fails. Simply repair or replace
the host and the network will continue to function.
Disadvantages
• If the host fails, the entire LAN will be

affected.
• Network speed decreases when the number
of nodes increases.
• Troubleshooting is difficult when one of the
nodes fails.
• A host must be installed to control the
network.
LESSON 82
DIFFERENCES OF NETWORK TOPOLOGIES
UNDERSTANDING DIFFERENT TOPOLOGIES
Understanding differences in network topologies helps us to see what each

topology is able to do.
180
Each topology has an influence on:
• the type of equipment we will use
• the potential of the network in accommodating more computers
• the way we manage our network
• the capabilities of the hardware to manage the flow of information
THE STRUCTURE NETWORK TOPOLOGY

The following table compares the structures of the three main types of the
network topologies:
Bus Ring Star

Topology Topology Topology
Structure there is a single all computers and there is a central
central cable other devices are host and all nodes
(backbone) and all connected in a connect to it
computers and other circle
devices connect to it
Host existence depends on network depends on yes
needs network needs
Connection It has no connection yes no
between nodes between the nodes.
Host failure network can still run network will fail network will fail
Node failure network can still run network will fail network can still
run
Ease of difficult. Need to depends on depends on the
troubleshooting search for the backbone. If there host. It
problematic node one is a backbone, is easier to repair
by one troubleshooting is the problematic
difficult. If there is host. However, if
no backbone, the the nodes fail,
focus is on the then each node
two nodes not has to be searched
communicating
Ease of adding easy difficult average
or removing
nodes
Number of many limited limited
nodes when
extending
network
181
LESSON 83
INTRODUCTION TO NETWORK STANDARDS
Network architectures are defined by exact and

detailed specifications regarding the physical layout,
cabling and methods used to access and maintain
communications in and between network media.
The Institute of Electrical and

Electronic Engineers (IEEE), is one
international organisation responsible for developing and
providing networking technology specifications for
worldwide usage.
We call these networking technology specifications as

network standards.
COMMON NETWORK STANDARDS

Network communications use a variety of standards
to ensure that data travels correctly to its
destination. Network standards define guidelines that
specify the way computers access the medium
to which they are attached. The guidelines also
describe the type of medium used, the speeds used
on different types of networks and the type of
physical cable or wireless technology used.
The well-known standards adopted by the Institute of

Electrical and Electronic Engineers (IEEE) are the 802
standards.These are the standards that define the
requirements for physical cabling and specify the way data is
transmitted.
The ones we will get to know here are:

• 802.3
• 802.7
• 802.8
• 802.11
182
802.3 ETHERNET LAN
The 802.3 standard is the standard for an Ethernet
LAN. In 802.3, Ethernet refers to the physical
cabling, while the way data is transmitted through
the cable is called Carrier Sense Multiple Access/
Collision Detection (CSMA/ CD).
This method of transmission requires that only one

device on the network can be transmitted at a time. If another device can
sense that a transmission is already in the cable, it will have to wait. All the
other devices on the network will also sense and wait until the line is clear
before one of them can transmit data along the cable.
802.7 BROADBAND LAN

802.7 is the standard specifications for a Broadband LAN. This 802.7
standard provides specifications for the design, installation and testing
needed for broadband transmissions. Broadband transmissions allow
simultaneous multiple transmissions or signals using different
communications channels at the same time.
802.8 FIBRE-OPTIC LAN AND MAN

183
Specifications for a Fibre-Optic LAN and MAN are given under the 802.8
standard. This standard gives the recommendations for the configuration and
testing of fibre-optic Local Area Networks and Metropolitan Area Networks.
802.8 WIRELESS LAN

This standard defines communication between a wireless computer or client
and an access point or between two wireless computers or clients.
The 802.11 standard uses the 2.4GHz frequency band to transmit data up to
2Mbps.
LESSON 84
PROTOCOLS
PROTOCOLS
Protocols provide the rules on how computers
communicate. They define how devices
intercommunicate in a network environment.
THE IMPORTANCE OF PROTOCOLS

Before protocols were developed, intercommunication
between devices was not possible. Protocols are
important as they define how devices, applications or
computers communicate in a network.
When two computers on a network perform a single

exchange of data or information, they will be busy
looking for the best communication process between
them.
184
For example, there will be a protocol to specify the format that the
information bits or packets must contain when traveling across this
connection.
There are also protocols that are responsible for ensuring that the
information bits or data packets are sent or received in a proper sequence.
All these protocols work together as

a group to prepare and process data
for an exchange of information
over a network. We call such a group
a protocol stack or a protocol
suite.
SOME TYPES OF
PROTOCOLS
Hypertext Transfer Protocol (HTTP) – This protocol is used to access,

send and receive Hypertext Markup Language files (HTML) files on the
Internet.
185
Simple Mail Transfer Protocol (SMTP) – This protocol is used for

transferring e-mail between computers.
File Transfer Protocol (FTP) – FTP is

responsible for allowing files to be copied
between devices.
Transmission Control Protocol (TCP) – This protocol ensures the

delivery of information packets across network.
Internet Protocol (IP) – This important protocol is responsible for

providing logical addressing called IP address to route information between
networks.
LESSON 85
INTRODUCTION TO TCP/IP
186
For communications across the Internet, we need to have protocols to

demonstrate how data should be packaged and sent. TCP/IP is the
communication protocol suite on the internet. It has a number of protocols
controlling and handling data communication on the internet.
TCP/IP stands for Transmission Control Protocol / Internet Protocol.
TRANSMISSION CONTROL PROTOCOL / INTERNET

PROTOCOL
TCP/IP (Transmission Control
Protocol / Internet Protocol) is the
internet communication protocol. It
is a standard that sets the rules
computers must follow in
communicating with each other on
a network. Some refer TCP/IP as
the Internet Protocol Suite.
When you use any applications or

programs to access the Internet,
these application will use TCP/IP to
achieve the task. For example,
when you want to surf a network,
you will use the internet browser.
Your browser then uses TCP/IP to
request services from Internet servers. These servers will use TCP/IP to send
the web pages you requested back to your browser.
TRANSMISSION CONTROL PROTOCOL
187
TCP (Transmission Control Protocol) is the protocol that sets the
communication rules between computers. Here, TCP establishes connection
between two computers, protects against data loss and data corruption.
TCP is responsible for breaking the data into packets before they are sent.
TCP then assembles the packets when they reach a destination.
INTERNET PROTOCOL
IP (Internet Protocol) is the protocol that transfers data from node to node.
Here, IP takes care of delivering data packets between two computers. IP is
responsible for sending the packets from sender to receiver.
LESSON 86
THE WAY TCP AND IP WORK
188
Each computer must have an IP address

assigned by the network administrator to
access the internet. Let say yours is
192.168.0.1.
When you access a web page, for

example the Yahoo main page, the
TCP/IP will make the communication
work between your computer and the
Yahoo server.
First, you type the URL address

“www.yahoo.com”on the browser. The
TCP will send a request for the web page
on Yahoo server according to the address
you typed in.
TCP will establish a connection between

two computers which is yours and Yahoo
server and it will prepare the full-duplex
communication.
A full-duplex system allows communication in both directions, and unlike half-duplex, allows
this to happen simultaneously. Land-line telephone networks are full-duplex since they allow
both callers to speak and be heard at the same time. A good analogy for a full-duplex
system would be a two lane road with one lane for each direction
The IP will begin sending the data

request from 192.168.0.1 to
‘www.yahoo.com’ or 209.131.36.158.
The Internet is a huge collection of

networks. There are many routes from
your computer to the server. IP will
send the data packets through these
routes as fast as possible. It will
constantly use several different routes
to deliver the packets to the
destination.
189
Meanwhile, TCP will continue to
maintain the link between the two
computers. TCP will close the
communication link once the web page
has reached your computer.
LESSON 87
PRIVATE COMPUTER NETWORK SETTING
Similar to mobile phones, computers connected to a network have:

• A phone number (an IP address on a
network).
• Service provider identification, for
example Maxis 012, Digi 016 and
Celcom 019 ( a subnet mask on a
network).
• Antennas ( a network gateway on a
network).
• A phone book function to help user put
names to telephone numbers ( a DNS
server on a network).
STEPS TO SETTING UP PRIVATE

NETWORK
When you want to set up a private network for the
school, you will need to install the network card, IP
address, Subnet mask and Default gateway.
1. Right click on the My Network Places icon on

the desktop and click the properties command.
2. In the Network Connections window, right click

on the network interface and click the
properties command.
190
3. In the network interface’s Properties dialog box, click the Internet
Protocol (TCP/IP) entry and then click the Properties button.
4. In the Internet Protocol (TCP/IP) Properties

dialog box, select the Use the following IP
address option.
5. Type in the IP address in the IP address text

box, for example 172.28.11.100.
6. Type in the Subnet mask in the subnet mask

text box with 255.255.255.0
7. Enter a default gateway with your server’s IP

address. Let’s say your server IP address is
171.28.11.1.
191
8. Make sure Obtain DNS server address

automatically is chosen.
9. Click OK in the Internet Protocol (TCP/IP)

Properties dialog box.
10.Click OK in the external interface’s Properties

dialog box.
LESSON 88
TYPES OF NETWORK COMMUNICATION TECHNOLOGY
The Internet has become one of the

necessary things in our daily lives. A lot can
be done via the Internet.
We use the Internet to communicate with each other,

deal with money transaction, surfing for entertainment
and education.
For example, we can pay our utility bills using the

192
e-banking services as shown in the video.
The Internet is one of the types of network communications technology

besides intranet and extranet.
INTERNET
The Internet, or the Net, is the worldwide, publicly accessible system of
interconnected computer networks that transmit data by packet switching
using the standard Internet Protocol (IP).
It consists of millions of smaller business, academic, domestic and

government networks, which together carry various information and
services, such as electronic mail, online chat, and the interlinked Web pages
and other documents of the World Wide Web.
Internet is one of the uses of

communication. Through the
Internet, society has access to
global information and instant
communication.
193
INTRANET
An Intranet (intra means within) is an internal network that uses Internet

technologies and it is a small version of the Internet that exists within an
organisation.
An intranet is a private computer network that uses

Internet protocols, network connectivity and
possibly the public telecommunication system to
securely share part of an organisation’s information
or operation with its employees.
Intranet generally make company information accessible to employees and

facilitate working in groups.
Simple intranet applications include electronic publishing of organisational

materials such as telephone directories, event calendars and job postings.
EXTRANET
An extranet is a private network that
uses Internet protocols, network
connectivity, and possibly the public
telecommunication system to securely
share part of a business’s information
or operations with suppliers, vendors,
partners, customers or other
businesses.
Package shipping companies, for

example, allow customers to access
their network to print air bills, schedule pickups,
and even track shipped packages as the packages
travel to their destinations.
194
LESSON 89
INTERNET
The Internet was created in the 1960s by people with great vision. They saw
the great potential value in allowing computers to
share information on research and development in
scientific and military fields.
Nowadays, when Internet is mentioned, it means

convenience, speed and economical. Many tasks can
be accomplished without having to travel far, spend
too much money or even wait for responses.
INTERNET
The Internet is the world’s
largest computer network which
connects millions of computers
all over the world. Many
organisations including private
as well as government agencies,
educational institutions and
individuals are
connected to the Internet.
Some of the many usages of the Internet are:

• Information; research & exchange
• Commerce
• real time communication
• banking
• shopping
• entertainment
• education
• gaming
Internet transmits data by using Internet Protocol (IP).
INTERNET ACCESS
To access the Internet, users need to
subscribe services to an Internet Service
Provider (ISP). An ISP can either be a
195
telecommunication company or any other organisation specialising in
providing access to Internet services.
Our Ministry of Energy, Water and Communications has licensed 6

telecommunication companies to provide telephony services in Malaysia.
Currently, only four of them are providing Internet services, they are Jaring
by MIMOS, TMnet by Telekom Malaysia Berhad, Maxisnet by Maxis
Communications Bhd and Time.net by Time dotcom Berhad.
I nternet connection is
divided into two
categories; dial-up or broadband.
For dial-up connections, a phone line and modem are needed to access the
Internet while broadband connections use cable modem or router.
INTERNET SERVICES
Internet users can access services like:
• Web browsing
• Email
• File transfer
• Newsgroup&Message boards
• Mailing lists
• Chat rooms
196
• Instant messaging.
LESSON 90
INTRANET
INTRANET
With new technologies many of our tasks can
be performed with a click of a few buttons.
Company operations are now not just limited
within very tall buildings or between two
buildings located within the city. They are also
available between cities, states and even
countries.
The intranet technology allows sharing of valuable information and lets

business activities carry on even without a key personnel present at the
business premises.
USES OF INTRANET
An Intranet is an internal network that uses
Internet technologies. It is a small version of
the Internet that exists within an organisation.
Intranet generally make company information

accessible to employees and facilitate working
in groups.
To access intranet, employees need to be online. To let the

employees access the intranet fro everywhere around the
world, every employee will be given the intranet address,
user name and password.
197
Intranet usually includes electronic publishing

of materials related to an organisation such
as:
• Telephone directories
• Event calendars
• Employee handbook
• Job posting
• Email services
• News bulletin
• Company forms
• Staff information
Intranets too are used to conduct more

sophisticated tasks such as:
• Groupware applications in project
management.
• Remote discussion rooms (chat rooms)
• Group scheduling
• Video conferencing
COMPARISON BETWEEN INTRANET AND INTERNET
198

Computer Networks and Communications

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Computer Networks and Communications

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Computer Networks and Communications

Uploaded by

Copyright:

Available Formats

SMK Bukit Saujana 2009

A computer network is a system of interconnected computers and peripheral

A computer network may operate on wired connections or wireless

Using electricity, radio waves or

The information that is transmitted

We transmit information or data by

Computers communicate with digital

The modem, which is short for

CONNECTIONS FOR NETWORKING

If any of these levels of connectivity

In order for a network to properly operate, two categories of network

Computers, hub, switch, router,

Operating systems and applications fall

NETWORK COMMUNICATION CHANNELS

This physical medium is called

Some common types of network

Communications channels provide the most basic level of

NETWORK INTERFACE CARDS AND NETWORKING

The NIC provides connection

This connection is necessary because

The Network Interface Card also

The other hardware component that is

The function of these devices is

How do computers communicate on a network?

In general, a network software must be able to handle

Since most computer networks are connected to the Internet, a network

Networking and communications technology is fast changing the way people

Through networking technology alone, many today are

Mobile communications today is also based on the

The internet has helped science and medical research

Homemakers, students, teachers, business people,

Organisations and individuals can make connections

All these are now possible because of networks and communications

IMPORTANCE OF NETWORKS AND

In a clinic for example, network communications

E-business supports many types of business

User can pay bills, check the account balance

With e-banking, most of the transactions can

Long Distance Communication

In business, important decisions can effectively

A LAN covers a small region of space, typically a single building.

The simplest form of LAN is to connect two computers together.

LAN is operated within a limited physical area, such as at home, school, a

A network which consists of less

Inexpensive hardware used in LAN previously include

LAN is a very high speed network (from previously

First, you have to understand the word

MAN is a network of computers located at different sites within a large

In this case, setting up a MAN across long

MAN often acts as a high speed network

Wide Area Network (WAN) is the largest network

An example in the society using WAN is the

A device called a router is

A router makes all the different networks communicate,

The transmission media in WAN uses the fibre optic

LAN is also frequently used to provide a shared

A MAN often acts as a high speed network to allow

A WAN might use costly