The document summarizes Enduro's "D" series structural baffle panel system. The "D" panel has an efficient 4" deep profiled section that provides strength and rigidity for demanding wall requirements. It is designed for bolted installation and has proven performance in numerous installations. Key details are shown for typical panel installation and connections to concrete walls using stainless steel hardware. Load span tables provide maximum span capacities for the "D" panel under different water differential loads. Product specifications are also provided.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
Eduro D Structural Baffle - Partition Walls Data Sheet
The document summarizes Enduro's "D" series structural baffle panel system. The "D" panel has an efficient 4" deep profiled section that provides strength and rigidity for demanding wall requirements. It is designed for bolted installation and has proven performance in numerous installations. Key details are shown for typical panel installation and connections to concrete walls using stainless steel hardware. Load span tables provide maximum span capacities for the "D" panel under different water differential loads. Product specifications are also provided.
The document summarizes Enduro's "D" series structural baffle panel system. The "D" panel has an efficient 4" deep profiled section that provides strength and rigidity for demanding wall requirements. It is designed for bolted installation and has proven performance in numerous installations. Key details are shown for typical panel installation and connections to concrete walls using stainless steel hardware. Load span tables provide maximum span capacities for the "D" panel under different water differential loads. Product specifications are also provided.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
0 ratings0% found this document useful (0 votes)
124 views2 pages
Eduro D Structural Baffle - Partition Walls Data Sheet
The document summarizes Enduro's "D" series structural baffle panel system. The "D" panel has an efficient 4" deep profiled section that provides strength and rigidity for demanding wall requirements. It is designed for bolted installation and has proven performance in numerous installations. Key details are shown for typical panel installation and connections to concrete walls using stainless steel hardware. Load span tables provide maximum span capacities for the "D" panel under different water differential loads. Product specifications are also provided.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
Enduro D Structural Bafe & Partition Walls
System Overview To meet the need for a lower cost, FRP bafe panel that would effectively address rigidity and other structural requirements, Enduro developed its D series panel. With an advantaged strength to weight ratio, the 4 deep, proled section has an extremely efcient design to address demanding wall requirements. Designed for bolted installation, Enduros D system has a proven track record of outstanding performance for numerous installations. 1
138
7.8
8.4 24 Cover 26 Width
7.8
D structural bafe wall system - solid and slotted with FRP columns Sedimentation and Flocculation Basins
Typical Details
D series bafe
SS bolt with nut & washer
D series bafe with nut & washer
D series bafe
SS bolt with nut & washer
SS bolt with nut & washer FRP angle FRP column SS adhesive anchor
Maximum spans are based on each panel being fastened with three (3) bolts to each support.
Specication: Fiberglass Reinforced Plastic Bafe Wall - D Series
Part 1 General 1.01 Description of Work The scope of this specication shall include materials for the berglass reinforced plastic (FRP) Bafe Wall System including FRP bafe wall panels; FRP columns; FRP angles; column base plates/angles; fasteners and connections. 1.02 Design Criteria A. Design Load (greater of water differential or wind load) 1. Water Differential: _____ in. (uniform load over wall) 2. Wind Load: _____ lbs./SF uniform load B. Deection Limit and Factor of Safety 1. Bafe Panels: L/D=______; Max De=Panel Depth; FOS = 2.0 2. Columns: L/D=100; FOS=2.5 Part 2 Products 2.01 Manufacturer Standard for design, characteristics, and performance is Enduro D Series Bafe Wall manufactured by Enduro Systems, Inc. 2.02 Materials A. FRP Bafe Panels, Columns, and Angles 1. FRP bafe panels, columns, angles, and associated components shall be ANSI/NSF Standard 61 certied for potable water application (as required). 2. FRP Bafe Panels shall exhibit these minimum properties: Stiffness (EI) 5,591,000 lb-in2/ft Moment Capacity 19,700 lb-in/ft 3. FRP structural materials shall exhibit these minimum properties: Tensile Strength 40,000 psi ASTM D 638 Flexural Strength 45,000 psi ASTM D 790 Flexural Modulus 1,690,000 psi ASTM D 790 Izod Impact (Notched) 25 ASTM D 256 Water Absorption .25% maximum ASTM D 570 4. FRP Materials shall include UV stabilized polyester resin; surfacing veil at top and bottom sides; gray color. 5. Factory cut edges and drilled holes shall be sealed with ANSI/NSF approved material. 6. FRP bafe panels shall be Enduro Series D, 4 x .125 prole; 4 depth; 18 nominal thickness; 40% glass ber reinforcing (by wt.); with top, horizontal ribs sloped downward not less than 10 degrees to minimize sediment buildup. 7. FRP Columns shall be Enduro Type ________ with 50% glass ber reinforcing (by wt.). Column base plates or angles shall be 304/316 Stainless Steel. 8. FRP Angles shall be 38 thick and 90 degrees. B. Hardware 1. Fasteners, anchors, and other structural hardware shall be 304/316 Stainless Steel. 2. Submerged anchors shall be epoxy adhesive type. For expanded specication, please contact us.
