Flowserve Offers A Wide Range of Pumping Solutions For Sump Services
Flowserve Offers A Wide Range of Pumping Solutions For Sump Services
Flowserve Offers A Wide Range of Pumping Solutions For Sump Services
CPXV
ESP3
Terra Titan
MJ/MJC RJ/RJC
PolyChem VGRP
Drain-Titan
CPX3 Self-Primer
MPT VSMP
Mark 3 USP
Experience In Motion
flowserve.com
Pump Model
Mark 3 USP ESP3 MPT CPX3 Self-Primer CPXV PolyChem VGRP Terra Titan Drain-Titan VSMP ECPJ MJ/MJC RJ/RJC
Flows To
320 m3/h (1400 gpm) 1300 m3/h (5700 gpm) 600 m3/h (2650 gpm) 100 m3/h (440 gpm) 1400 m3/h (6160 gpm) 565 m3/h (2500 gpm) 250 m3/h (1100 gpm) 160 m3/h (700 gpm) 135 m3/h (600 gpm) 1000 m3/h (4000 gpm) 225 m3/h (1000 gpm)
Heads To
120 m (400 ft) 116 m (380 ft) 35 m (115 ft) 100 m (330 ft) 250 m (820 ft) 110 m (350 ft) 45 m (150 ft) 40 m (130 ft) 70 m (220 ft) 150 m (500 ft) 30 m (100 ft)
Pressure To
20 bar (285 psi) 12 bar (175 psi) 5 bar (72 psi) 25 bar (365 psi) 25 bar (365 psi) 17 bar (250 psi) 5 bar (70 psi) 4 bar (55 psi) 12 bar (175 psi) 20 bar (285 psi) 10 bar (150 psi)
Max Temperature
370C (700F) 180C (350F) 75C (165F) 350C (660F) 350C (660F) 90C (200F) 100C (212F) 100C (212F) 120C (250F) 350C (660F) 110C (225F)
Product Description
Self-priming, multiple wet-end alloys Wet-end parts interchangeable with Mark 3 ASME B73.1 pumps Self-priming, solids handling design Self-priming, ATEX, ISO 2858 and 5199 approved ISO 5199/13709 compliant Non-metallic construction Cantilever, hard-metal or urethane wet-end Large diameter cantilever drive shaft, urethane-lined wet-end Glass reinforced polymer design for general industrial use Lineshaft bearing designed to ISO 13709/API 610 VS4 requirements MJ: hard metal, direct coupled or V belt driven RJ: rubber-lined
To find your local Flowserve representative: For more information about Flowserve Corporation, visit www.flowserve.com or call +1 937 890 5839.
flowserve.com