VPT 7 documentation

VPT 7 by HC Gilje, released november 2013.

Video Projection TooI (VPT) 7.0, a projection powerpack.
VPT is a free multipurpose realtime projection software tool for Mac and Windows.
Among other things it can be used for projecting video on complex forms, adapt a projection to a
particular space/surface, combine recorded and live footage, for multiscreen HD playback, for
interactive installations using arduino sensors or camera tracking ++
VPT has become a popular tool for theatre and installation use, but is also used by VJs.The
previous version,VPT 6, was downloaded over 20000 times.
VPT 7 is completely rebuilt making it faster, stabler, easier and more flexible to use than previous
versions of VPT.
and yes, it is still FREE!
Some of the new features incIude:
dynamic layers: add the number of layers you need for a particular project.
flexible source setup: create your own mix of quicktime,hap,still and mix modules according to the
need of your project (on top of the live, solid and syphon sources).
In the mac version VPT continues to support the syphon framework but has also added support for
the HAP codec, an opensource codec that greatly improves playback of high resolution video.
there is a completely new mask editor which lets you add as many mask points as you need.
the cornerpin adjustements of layers have improved, now providing a more correct distortion.
the mesh editor is also new, and you can now apply a mesh distortion together with cornerpin
distortion (not possible in previous versions).
expanded possibillites with controllers and the cuelist.
an optional alternative to the traditional VPT presets using source presets and source playlists.
System Requirements
Mac
Mac Intel machine running OS X 10.5 or later, and 1 GB RAM. Jitter requires QuickTime 7.1 (or
later), an OpenGL-compatible graphics card, and OpenGL 1.4 (or later).
For syphon and hap: minimum OS X 10.6
Windows
Windows XP, Vista, or Windows 7 machine with a Pentium 4 or Celeron compatible processor
or higher and 1 GB RAM. Jitter requires QuickTime 7.1 (or later), an OpenGL-compatible graphics
card, and OpenGL 1.4 (or later).
VPT 7 documentation Page 1
The VPT 7 interface
VPT 7 consists of the interface, the preview window and the output window. The output window is
the window that should be on your projector output. Click the fullscreen button at the bottom of the
VPT interface or hit the [esc] key on your keyboard to go to fullscreen.
VPT 7 documentation Page 2
interface overview
the VPT controI bar
VPT 7 documentation Page 3
quick start
When you open VPT for the first time, there is probably not much going on, the top left part of the
interface will look something like below.
In VPT 7 there is not a fixed number of layers, you add the layers you need for your project.
create a Iayer
You create a layer by clicking on the + button.
A yellow circle with the number of the layer will appear just below.
VPT 7 documentation Page 4
In the preview and output window you will see the corner handles of the layer, but since the layer
has no source yet it will be black.
In the bottom right section of the VPT interface the layers overview now contains information about
the newly created layer
adding a source to the Iayer
To fill the layer with content you need to first activate one of the sources in the sources section
(top right section). Start by clicking on the on button in the first source (labelled 1 qt), then click on
the area to the right of the on button (where it probably says OFF). A menu of available media is
then revealed. Select one of the items. The items in the menu refers to videos in a folder assigned
to this particular source. By default this folder is in the default project folder that comes with the
VPT download.
VPT 7 documentation Page 5
To see your selected source click on the monitor button, and a small window next to the source
will show you the currently selected media.
To use the activated source in the newly created layer we need to tell the layer which source to
use. In the layer section click on none and a menu of available sources will appear. The first 8
sources are labelled 1video, 2video etc. These sources can contain different types of video
sources (quicktime, still, hap, mix) but are always referred to by the more generic name of 1video,
2video etc. So in this case we are using source 1video. Select this, and the vpt icon (or another
media file you selected) should appear in the preview and output windows.
VPT 7 documentation Page 6
drag the corner handIes to position the Iayer
click and drag on the handles in either the preview or output window to position your layer. If you
lose control over a corner (which could happen if you drag a corner across the midpoint of the
layer) you can use the undo function ctrl-Z to revert to the previous corner position. Note that the
undo function only works inside the preview/output windows.
To move the layer, shift-click and drag on the layer. To scale the layer, alt-clcik and drag on the
layer.
storing what we have made
Now that you have created a layer, given it content and postioned it on our output, you want to
save our output.
Unlike many programs, File-save is not how you save your work in VPT.
VPT is based on storing presets. Presets store information about the current state of VPT, so
basically you save what you see on the output. VPT is a real-time application that renders the
output in real-time, so when you save a preset you dont save an image or video file, but rather
information about the current position of layers, which sources are used etc.
To store a preset you need to give it a unique nr and a descriptive (but optional) name, so in this
example we have used 1 for the preset number (0 is a special case, dont use this to store
presets) and VPT-layer for the preset name. Click on the store button to save the preset.
If you save another preset with the same number but a different name you will overwrite the old
preset. To avoid doing this you can change the behaviour of the store button by clicking on the
menu to the right of the button. If you select storenext VPT will save the preset at the next
available slot, thus avoiding overwriting exisisting presets. However when you want to modify an
existing preset you would probably want to switch back to the normal store mode.
VPT 7 documentation Page 7
it will now appear in the preset list. You can now close VPT, and next time you open it you can
select preset 1 by clicking on it in the preset list.
Adding more Iayers
Adding more layers is just as simple as adding the first one, just click on the + button.
A few things to note:
A new layer is always added on top of the previous ones, so they will initially obscure the layers
underneath before you give the layer a content, position it, adjust the transparency.
If you add layers after you have saved presets with the initial layers, you need to resave these
presets with the layers adjusted accordingly (this usually just means setting the transparency of
the new layers to 0). This is because the older presets have no information about layers being
added later.
VPT 7 documentation Page 8
The active Iayer
The concept of the active layer is important in VPT, as you work on one layer at a time, and it
needs to be clear which layer you are working on. This information is located in many places:
The active layer is the layer with the corner handlers in the preview/output window. The yellow
circle in the top left section indicates the active layer, and in the layers section the light blue
background indicates the active layer.
To navigate between layers (thus changing what is the active layer) you can either click on the
circles in the top left section, on the numbers on the left side in the layers section, or use the
number keys on your keyboard to switch between the layers (1-9). You can also use the [tab] key
to cycle through the layers.
Seeing more Iayers in the Iayers Iist
When you start to get a few layers, the layers overview section in the bottom right part might get a
bit crowded. You can easily adjust the division between the sources and layers by dragging on the
black line to the right of this section
VPT 7 documentation Page 9
the active tab
In the control tabs section in the lower right part of VPT there are a lot of options for controlling
parameters for layers, sources and presets. You select a tab by clicking on the name of the tab.
The active tab refers to the active layer, and lets you set and adjust parameters related to the
layer, like transparency, color, geometry and mask (with the easy to use mask editor), as well as
numerous ways of adjusting the texture (the content/source of the layer) with brightness/contrast/
saturation, mesh distortion, scaling, flipping and rotation of the texture as well as blur and motion
blur.
A note about adjusting numbers in VPT
If you click on a number it gets a red triangle which means it is the active parameter. You can now
use the keyboard to enter a value. To change values using your mouse, you click and drag on the
number. Click and drag up to increase the value, down to decrease the value. Where you click on
the number determines the precision/resolution of the value: The further behind the decimal point
you click the more numbers behind the decimal point.
VPT 7 documentation Page 10
Creating mask for a Iayer
first, make sure you are in the layer you want to apply a mask to. Also, it might be useful to use a
white solid as the source for the layer while making the mask to easier see the outlines. Make sure
your layer covers the area you want to mask before you start making the mask.
Click on the editor button to open the mask editor.
The mask editor opens on top of the VPT interface. If this is the first mask you make, you will see
a grey triangle with corner handles. This is the default mask which you can return to by clicking the
reset button. On your preview/output window you now see the mask form inside your active layer
(active layer is indicated by the number in the top right section of the mask editor).
VPT 7 documentation Page 11
You creat more points in the mask outline by clicking between existing points. Click and drag on a
point to move it to the desired location. You can add as many points as needed to make your
mask as precise as possible. You can delete a point by selecting it (it is then red) and hit the
delete/backspace key on your keyboard.
You will notice that the changes you do in the mask editor is updated in the preview/output
windows.
VPT 7 documentation Page 12
When you are happy with the mask shape, give the mask a name (here newmask), and click the
save mask button. The mask editor window will then close.
in the active layer tab you will now see that the mask is active, using the newly created newmask
When you create a mask, it is saved as a black and white png file and saved in the mask folder
inside your project folder. You can see (and select) the available masks by clicking on the mask
menu.
VPT 7 documentation Page 13
circuIar mask
in case you want to make a circular mask instead of a mask based on points, select circle in the
mask editor and change the circle diameter by dragging the slider in the top right section. Save the
mask as you would do with the point mask.
adding a bIur before you save the mask
if you know that you want to have a blurry edge on your mask it is much more efficient to apply the
blur before you save it as a file, than to apply the blur afterwards (although this is possible using
the maskblur section). Simply click on the blur button and drag the slider to get the blur you want.
VPT 7 documentation Page 14
The blur is only visible in the preview/output window, not in the editor.
How to use a Iayer as a mask for underIying Iayers
First, create a layer, make sure it is the top layer and fills the whole output and use solid as a
source. Create a mask using the mask editor and save it as you normally would.
VPT 7 documentation Page 15
The topmask should function the opposite of a normal mask: the mask shape should be
transparent while the surrounding part should be opaque.
To achieve this you need to do 2 things: First, invert the mask, second change the color of the
layer to black.
Now you have a cutout mask in the top layer
VPT 7 documentation Page 16
creating a compIex mask
Sometimes you need more complex masks than you can make with the mask editor.
One way of doing this is to combine multiple layers to create a mask, where each layer is either a
black or white solid, with or without a mask. Save all the layers as a preset, thus making it easy to
adjust the mask later.
To use this as a mask for another layer you need to first go to fullscreen and then take a
screenshot of the output.
Rename the screencapture and put the image file in the mask folder
VPT 7 documentation Page 17
click the circle next to the maskmenu to refresh the menu and you will find your newly created
mask.
You can now use this mask as any other mask, just make sure that the layer that uses the mask
covers the whole output (or else the mask wouldnt fit)
Adjusting or making new masks in an image editing appIication
You can easily adjust existing masks or make new masks in an image editing application like gimp
or photoshop, just make sure to put them in the mask folder in your project folder. The mask files
are png files 1024x768 pixels.
VPT 7 documentation Page 18
Adjusting the size and position of a source inside a Iayer
After you have positioned and scaled your layer you might want to adjust the size, position and
rotation of the source inside the layer. When you are doing adjustements to the source inside a
layer you are not affecting the original source. When a layer is given a content this is called its
texture, so we can use the same source for several layers but they will be treated as individual
textures for each layers.
Sometimes you only want to use a part of a texture, maybe you want to use different parts of a
source on different layers.
In this example there are two layers, the first one covers the left half of the output, the other one
the right half.
We want to use only half of the texture on each layer, so we can use the tile option in the active
tab. For the left layer we only want to use the first half of the texture in the horisontal direction. The
tiles are divided in halfs, thirds, fourths and fifths in both the x and y direction so for instance 2/3 in
the x direction would mean we use only the midt hird of the texture.
Here the texture is changed for the first layer
VPT 7 documentation Page 19
then we do the same thing for the second layer, except this time we want to use the second half of
the texture. I have added a blur to this layer to see the difference between the two layers.
the flip section lets you flip the texture horisontally, vertically or both.
Here we have chosen to flip it vertically on both layers.
VPT 7 documentation Page 20
zooming, panning and rotating the texture
Tiles work fine in some situations, but sometimes you need more control. The zoom control lets
you zoom into the texture, move it around and even rotate it, inside the layer border.
This can be very useful when you want to fit the texture inside a mask.
VPT 7 documentation Page 21
the mesh editor
VPT 7 has an easy to use mesh editor, available in the active tab. Click on the mesh button to
open the mesh editor, and you will see an interface not too different from the mask editor. It is
important to first either reset the mesh or select the gridsize. In this example it is set to 3x3, so a
total of 9 control points. If you want to see the grid on the output click on "show ctrl matrix".
Simply drag the control points to distort your image.
VPT 7 documentation Page 22
Close the mesh editor to save the mesh grid. The mesh settings will be saved with the layer when
a preset is stored.
VPT 7 documentation Page 23
Copying and pasting coIor vaIues
Sometimes you might want to use the same color in different layers. Its easy to copy colors in the
active tab.
VPT 7 documentation Page 24
The sources
VPT contains a wide selection of sources, and the first eight ones 1video - 8video can be
customised to the need of your project, so you could for instance have 8 quicktime video sources
or 8 still image sources.
The source types available for the 1-8video sources are the quicktime module, the hap module
(currently mac only), the still image module and the mix module. The quicktime module is the one
you probably will use the most, the hap module is optimised for videos encoded using the HAP
codec, the still image module is the best choice if you only work with still images. The mix module
lets you mix two sources using various blendmodes.
VPT 7 documentation Page 25
The quicktime moduIe
The quicktime module refers to a folder of videos (or a mix of videos and stills). By default this is
the video folder inside the project folder.
To use the source you need to turn it on by clicking on the on/off button and then select a source
from the menu (which refers to the content of the video folder).
VPT is based on quicktime, and the preferred codec for video is photo jpeg 75% quality or one of
the apple prores codecs. Videos downloaded from the internet in mp4/h264 should be converted
before use (Check out the trimmer addon in the appendix)
Depending on your computer, playing several large video files at the same time might slow down
everything, so either render your videos at a reasonable size (if you are filling a layer that only
covers a quarter of the projected output it doesnt make sense to use full HD resolution for
instance), or use the resolution menu in the quicktime module to let VPT lower the resolution for
smoother playback.
VPT 7 documentation Page 26
Adding your own sources
Its easy to add your own media files to VPT. One way is to just copy your files to the video folder
inside the project folder.
You can also drag folders (not individual files) to the different video containers.
In this case, the first video container, 1video is updated with files from the folder constructions.
You can see the foldername associated with a video container in the top right corner of the menu.
VPT 7 documentation Page 27
You can have different media folders associated with the different video containers.
NB! If you add files to a folder while VPT is open, you need to refresh the video container
associated with that folder by clicking on the source number.
stiII image
The still image module works similarly to the quicktime module.
You can adjust the resolution in a similar way as described for the quicktime module, and you can
also adjust the refresh rate (the numbers 1-4).
Unlike a video which is updated maybe 30 times a second, a still image doesnt get updated by
itself, so VPT updates the image at regular intervals based on the the refresh rate chosen.
1 is updated 30 times a second (seldom needed for still images)
2 is updated 10 times a second
3 is updated twice a second
4 is updated every 2 seconds
What you end up choosing really depends on how you will use the still images so you need to
experiment, but you will notice a significant toll on framerate if high res images are updated too
often.
VPT 7 documentation Page 28
the mix moduIe
the mix module lets you mix any two sources using different blendmodes. You select your sources
from the A and B menus.
The blendmodes can be found in the mix menu, and the mixslider lets you mix source A with
source B.
HAP moduIe (mac onIy)
The HAP module is similar to the normal quicktime module, but is particularly well suited for high
resolution video, but needs to be compressed with one of the HAP codecs that need to be
installed on the computer running VPT.
VPT 7 documentation Page 29
Make your own seIection of video moduIes
In the preferences for VPT, contained in a text file called prefs.txt in the project folder, you can find
information about which video source modules (1video-8video) are used.
The last line contains the word sourcebank, followed by some capital letters inside quotes.
In a text editor you can easily modify this line according to your need: Each of these letters refer to
the module type:
Q quicktime video
S still image
H hap
M mix
So for instance if you want 4 quicktime sources and 4 still image sources you would change the
line to
sourcebank "Q Q Q Q S S S S"
soIid
The solid modules creates a white solid (that you can tint when used as a source in a layer), and
are probably mainly used as backgrounds or in combination with masks (very useful when creating
a mask).
Like the still source, the solid has different refresh rates. It also has a fixed number of resolutions
to choose from: XS-S-M-L-XL
XS 4x4 pixels
S 80x60
M 320x240
L 640x480
XL 1024x768
If you only use the solid to fill a layer with color with no mask you can use XS.
If you use it with a mask the mask will look smoother the higher resolution the solid has (try it out
to see the difference)
VPT 7 documentation Page 30
Iive input
VPT has two live inputs which lets you work with video cameras connected to your computer or
any built in cameras. Like the other sources you activate the live source by clicking on the on/off
button. Normally VPT autodetects if a camera is connected and opens the connection, and you
should see the input in the monitor window (if the monitor is active). If not, click on the settings
button and try to find your camera.
You should connect input sources to your computer before you start VPT, else you need to restart
VPT.
recording Iive input
You can record the input from the live sources directly into a video folder. So if you select 1video
from the "record to folder" menu video files will be recorded to the folder associated with the
1video source.
Click on the rec button to start the recording. It turns red to indicate a recording is taking place.
Click on the button again to stop the recording.
VPT autonames the recordings xlive101, xlive102 etc.
VPT 7 documentation Page 31
Source presets
At the top of the sources section is source-preset control. This hasnt been mentioned yet,
because the default behaviour of VPT is that when you save a preset a source preset is
automatically created and you dont need to worry about this.
However there are several scenarios where it might be useful to keep VPT presets and source
presets separate.
A normal situation for VPT is that you create and map your layers for a specific setup, and you
dont really need to move layers around or change their properties. Normally you might be most
interested in just creating a fixed setup for the layers and just change the content. So in principle
you could then work with only work with one VPT preset with layers and masks etc, and then do
the rest with source presets.
A source preset saves information about all the sources, it captures the state of which video is
selected in each source, playback speed, looptype, crossfade time etc.
You create a source preset by shift-clicking on one of the circles at the top of the source bank. You
select a source preset by clicking on a circle. A yellow circle indicates the current preset, a dark
grey circle indicates a preset is stored, a light grey circle indicates an empty preset slot.
Note that VPT by default creates a source preset everytime you save a VPT preset.
You need to change a few settings in the prefs.txt in the projectfolder to work with source presets
separate from the normal VPT presets (see more about the preferences in the preferences section
of the documentation). The default settings are as follows:
This tells VPT to include sources when saving VPT presets, to automatically create and store a
source preset (starting at 1001) when saving a VPT preset, and that crossfades in the cuelist will
override any crossfade setting in the individual sources.
You would want to change the settings as shown below, disabling autosaving sourcepresets and
enabling use of the local crossfade values.
VPT 7 documentation Page 32
syphon (mac onIy)
VPT supports the syphon framework, which lets application share videostreams. This makes it
possible to use the output from other applications like Processing, OpenFrameworks, Max-Jitter,
VDMX, Modul8 ++ as a source in VPT.
syphon out
VPT can also send its output as a syphon output, so VPT output can be used in other applications.
The syphon out button is located at the bottom of the source list, below the syphon modules.
Syphon output is particularly useful in combination with Syphon Recorder which lets you record
the incoming syphon video stream, thus a way to record the output from VPT.
VPT 7 documentation Page 33
cIip controI tab
Eventhough the commands here are available through the router or through OSC this gives direct
access to more control over the video sources (mainly the quicktime video sources).
First select the video source you want to control (1video-8video)
Ioop points
set loop points by click and dragging in the slider area. cmd+click-drag (mac) or ctrl+click-drag
(win) to move the selected loop (thus the loop length stays the same), shift+click on either side of
the current loop selection to increase it.
Loop points are relative, with values between 0. and 1., and these values are saved when a preset
is stored.
scrubbing
To scrub through a video you should either stop the video or set the rate to 0.
VPT 7 documentation Page 34
then just click and drag on the slider to scrub through the frames of the video
pIayIist
Playlist is an option to have individual playlist for each videosource, playing a clip to the end (or for
the still source after specified slide length), then crossfading to the next item in the list.
the numbers represent clip nr in the specified source (separated by a space), so the playlist below
would play clip 3, fade to clip 5, play clip 5, fade to clip 2, play clip 2, fade to clip 1, play clip 1, fade
to clip 3 etc as long as the playlist button is on.
When you click on the playlist button there is a p appearing in the bottom left corner of the
corresponding source (you can also activate it directly there).
The crossfade time is the one specified in the source, so in this case 0.5 seconds.
For the playlist to work you have to make sure that no clip is shorter than twice the crossfade time
(since a clip fades from one clip and then to another), else the playlist will not move on to the next
clip. So if you have a crossfade time of 0.5 seconds for a playlist the minimum length of the clips in
the list is 1 second.
You cant mix videos and stills in a playlist.
You can make a playlist of still images using a still image source, but then you need to specify how
long each still image will be shown before fading to the next one. You set the time in seconds by
adjusting the number below the playlist button in clip control.
VPT 7 documentation Page 35
cIiptime and Ioopreport
you can activate cliptime and loop report for a source at the bottom of the clip control tab.
Click on clicktime report to toggle on/off for the particular source. A white circle (1-8) indicates that
cliptime report is on.
Click on loop report to toggle on/off for the particular source. The corresponding circle will blink
white when a loop is reported.
Cliptime and and loop report can be used to trigger other events via the router.
Adding sound
You can easily add sound to your VPT project by converting a soundfile to a quicktime movie and
play it from one of the video modules. You can convert a sound file to a movie using Quicktime
pro, or you could download a little helper app I made that you can open from inside VPT. This also
lets you convert videos to other formats and resolutions, which can be handy.
http://nervousvision.com/vpt/xtension/VPT_trimmer-mac.mxf.zip
http://nervousvision.com/vpt/xtension/VPT_trimmer-win.mxf.zip
See the appendix for more info on the VPT trimmer.
Triggering muItipIe cIips at the same time
There are several approaches to this in VPT 7, either using presets, source presets, or the router
combined with a controller or a command from the cue list.
If you want to make sure that clips start from the beginning in a preset you need to click the t
(trigger) button for each source
You can then either save normal vpt presets (where sources are included in the preset) or create
source presets. Every time the preset is selected the quicktime videos will then start at the same
time.
VPT 7 documentation Page 36
The other approach is to set up triggers in the router (then you dont need to activate the trigger
button), just make sure the same controller controls the trigger parameter for each source.
In this case I have chosen controller nr 17 because it is easy to test with the built in buttons in the
miditab
Finally, you can trigger the videos from the cuelist using an osc formatted message to the router.
17 is the controller nr, 1 is just an arbitrary number as we only want to trigger an event, not send a
value.
The VPT foIder structure
When you download and unzip VPT 7 you will get a folder structure like the one below (On
Windows you will have some extra files plus a support folder).
The folder contains the application file, the default project folder and a textfile called projectpath. It
is very important that the projectpath file stays in the same folder as the VPT application as this file
tells VPT which projectfolder to use.
If you open this text document you will see a single line of text.
The name inside the quotes is the name of the current projectfolder. The 0 indicates that the folder
is in the same folder as the VPT application.
If you for some reason want to have the projectfolder somewhere else you need to specify the
whole filepath and change the number to 1.
VPT 7 documentation Page 37
The easiest way to make a new project is simply to duplicate the defaultproject folder and give it a
new name. Remember to change the projectpath in projectpath.txt to switch projects.
The project folder contains the default video and mask folders, as well as the presets folder,
cuelist, preferences and information about how many layers are used.
The layers textfile contains information about how many layers were used the last time VPT was
closed. VPT uses this when starting up to create layers.
VPT 7 documentation Page 38
VPT preferences: prefs.txt
The VPT preferences consists of a list of messages followed by values, and this is where you do
some customization of VPT. It is important to not change the messages, only the values.
fsaa 1/0 use hardware accellerated rendering. Default 1
framerate in frames per seconds. Default 30 fps
previewframerate Default 15 fps (to make the general performance of VPT better)
number_of_screens Default 1, maximum 3 when used in combination with a
matroxtriplehead2go
screenratio Default 4:3. Accepts anything as long as it follows the number:number format
screendivider 0/1. Default 0. If using more than 1 screen the screen divider can indicate the
division between each screen.
preview_width in pixels. Default 320
menubar 1/0 Default 1. Menubar on when starting VPT (see appendix for Mavericks issue with
menubar in fullscreen)
cursor_off 0/1 Default 0. Cursor off when starting VPT
preview 1/0 Default 1. Preview window on or off.
fullscreen 0/1 Default 0. Start VPT in fullscreen.
autostart preset/cue/off preset/cuenumber. Start automatically at a preset or cue number.
drawcorners 1/0. Default 1. Show corner handles on active layer.
master 1/0. Default 1 VPT render engine on/off at startup
include_sources 1/0. Default 1. Include sources when storing a VPT preset
autosource 1/0. Default 1. Automatically create a new source preset when storing a VPT preset
(numbered from 1001 and up)
xfadelocal 0/1. Default 0. Use crossfade times associated with the individual sources. If set to 0
crossfade times in the cuelist overrides local values
sourcebank list of 8 letters enclosed by quotes. This lets you customize your sourcebank
according to the need of your project. Q=quicktime, H=hap, S=still, M=mix.
VPT 7 documentation Page 39
Creating a cueIist from stored presets
The cuelist allows you to create a sequence of your stored presets. Remember that VPT presets
save the state of VPT (meaning all information regarding layers and sources), not rendered video
or images. Creating a transition between two presets thus means that VPT interpolates data
between these two states (a bit similar to keyframes).
The cuelist is created by creating lines containing information about the type of command, and
most often also information about presets involved and a time.
Some of the commands:
F/f : fades(interpolates) from one preset to another in a specified amount of time (in seconds).
F 1 2 3. would fade from preset 1 to 2 in 3 seconds.
C/c: cuts directly to a preset.
C 3 would jump directly to preset 3
If you want to trigger each cue manually this would be the two commands you would use most of
the time.
After adding cues to the cuelist you need to switch to play-mode to play them, then click on the
cue where you want to start. To stop the cuelist click the stop button (or click on the edit button).
Often you want to automatically go to the next cue after the current cue is finished.
To do this just add a + (separated by a space) after your cue.
example:
F 1 2 3 +
C 3
would first fade from preset 1 to 2 in 3 seconds, then go to the next cue which cuts directly to
preset 3.
If you work with cues connected together you might sometimes want t a delay before executing
the next cue:
D/d: create a delay specified in seconds before jumping to the next cue
D 5 delay 5 seconds
example:
F 1 2 3 +
D 5
C 3
when the first fade is complete VPT waits 5 seconds before executing the cut to preset 3 (notice
that the delay line doesnt have a + after it because it will always jump to the next cue when the
delay time is over).
If you want a cuelist that loops continously you can tell VPT to jump to a line in the cuelist
L/l: jump to the line specified
L 1 would jump to the top of the cuelist.
VPT 7 documentation Page 40
if you want to change or add many cues, it is much easier to use the editor. Click on the open
editor button.
here you can add and change your cues as you want, just remember to have "end" at the end of
the list
VPT 7 documentation Page 41
after you close the text editor click on the "update cuelist" (this is not necessary if you close the
editor by using the "close editor" button).
You can also create a cuelist in any text editor and open it in the cuelist tab.
More advanced features in the cueIist
S/s: sourcepreset
S 2 would activate source preset 2
You can create a list of source presets instead of using the VPT presets. See the source preset
section for how to create them.
Since source presets already contain crossfade information you only need to specify the source
preset number.
O/o: send a OSC formatted message to VPT
-variable number of parameters.
+ if you type a plus after the parameters this indicates that the cuelist should continue to the next
cue in the list
example
O /layer1/fade 0.50
To set the fadelevel of layer 1 to .5
X/x: send OSC formatted messages out from VPT to another application/computer
the OSC destination needs to be set in the OSCeditor tab.
R/r: Send controller fades to the router, see the router section for how to set up the router.
-Four parameters: control nr startvalue endvalue time
+ if you type a plus after the parameters this indicates that the cuelist should continue to the next
cue in the list
example
R 1 0. 1. 5.
would fade controller 1 in 5 seconds from 0. to 1.
if in the router controller 1 is mapped to the fadelevel of layer 1 (with range set to 0. to 1.) you
would then control the fadelevel of the layer from a line in the cuelist.
VPT 7 documentation Page 42
The Router: mapping controIIers (midi/Ifo etc) to VPT parameters
Almost any parameter in VPT can be controlled. The router lets you set up connections between
controllers and parameters.
A controller can be many things. It can be the built in sliders and buttons you find in the midi tab, it
can be an external midi controller (which you set up in the midi tab), it could be one of the built-in
lfo wave generators in the lfo tab, or it could be a controller set up in the cuelist (using the R
command).
controIIer number
A controller is always referred to by a number. The first column in the router is the controller-nr
(ctrl-nr).
By default lines in the router are set to ctrl 1, 2, 3 etc, but the controller number can be set as
needed. The important thing to understand is that the controller number specified in the first
column in the router must correspond to the controller you are using.
So, for instance in this case both slider 1 in the midi tab and lfo 1 in the lfo tab refers to controller
1, and would then both control whatever parameter controller 1 is mapped to (in this case the rate
of 1video).
VPT 7 documentation Page 43
destination
the second column specifies the destination type, so here you choose if you want to send control
data to a layer or video source (or any of the other items in the dropmenu).
The number box just after the dropmenu lets you specify the destination. So if you have selected
video from the dropmenu you need to tell VPT which of the videosources you want to control by
changing this number accordingly (1-8). So if it is set to 1 your destination is 1video.
parameter
After setting the destination you need to specify which parameter at this destination from the
dropmenu. Since we have selected video as destination type we only get relevant items in the
dropmenu. In this case we have chosen rate (speed of video).
VPT 7 documentation Page 44
range
The final two numbers specify the relation between the incoming controller values and the
destination paramater.
Normally most values in VPT are defined as being at the lowest point with a value of 0 and the
highest point with a value of 1, so numbers between 0. and 1. represent values between the low
and high. So when a layer fade is set to 0 the layer is not visible, at 0.5 it is half-transparent, at 1. it
is opaque.
In the case of the rate of a video we might want to expand the range. 0. would mean the video
stops, 1. is normal speed. -1 is backwards but at normal speed.
So we could set the low value of the range to be -1 and the high value to be 1.
This would mean that when my controller slider is at the bottom this would be mapped to a value
of -1, and when it is at the top it would be mapped to 1.
one controIIer controIs severaI parameters
several lines in the router can be controlled by the same controller, so in this case controller 1
would control both the fade level for layer 1 and 2.
if we reverse the range in the second line, the layers would crossfade using one controller, so
when layer1 is at full (1.) layer2 is off (0).
VPT 7 documentation Page 45
midi sIiders and buttons
VPT can easily connect to external midi controllers. Select your device from the menu (its best to
connect your device before you start VPT).
Normally the number to the left of cc will correspond to the controller number (you will see values
in the range 0-127 in the number next to value).
VPT also has some built in sliders and buttons which you can use together with the router.
VPT 7 documentation Page 46
Ifo: use waveforms to controI parameters in VPT
LFO or Low Frequency Oscillators are basically waveforms that let you automate parameters in
VPT via the router.
VPT 7 documentation Page 47
OSC: sending messages to and from VPT
VPT uses a message formatting system called OSC (Open Sound Control) both to send
messages internally in VPT but also to send/receive messages with other applicatons and/or other
computers. The protocol used is UDP.
OSC is an addressing system that a lot of different applications use, and it is a very tidy way of
accessing parameters with a hierarchical message structure.
The first part of of the message is the destination, the second part is the parameter value you want
to send. The destination address gets more detailed from left to right.
A simple example: If you want to control the fade level of layer 1 you start with the most general
part, the layer, and ending with the most specific part, the parameter you want to control. Each
messagelevel is separated with a /.
/1layer the layer you want to access
/fade the parameter you want to access
put together this becomes /1layer/fade
Finally you would need to send a value to the fade parameter so the final OSC message could be:
/1layer/fade 0.5
If you want to access the brightness value of layer 2 you need to go one level deeper:
/2layer/brcosa/brightness 1.2
To set the rate of the first video source to 2. you first need to add /sources, then which source
module /1video, then the parameter and its value:
/sources/2video/rate 2.
You will notice that the message structure is very similar to how you create control mappings in
the router. In fact the router creates OSC messages from the router list.
VPT 7 documentation Page 48
OSC editor
To be able to send and receive messages between applications you need to set up a receiving
port on the receiving end. For VPT this is 6666. If you are sending to/from the same computer you
can use the localhost address, which is 127.0.0.1. Else you need to find the ip address of the
computer and make sure to be on the same network.
The OSC editor tab lets you set up and monitor OSC message traffic in and out.
VPT has a default address and port it sends OSC messages to which is 127.0.0.1 and port 6667,
so if another application on the same computer is listening at port 6667 it will receive OSC
messages from VPT, provided the osc send button is on (default off).
Messages that VPT sends out:
/preset i
/cue i
/cuetrig t
/transitiondone t
/loopreport i t sourcenr bang
/cliptime i f sourcenr relative cliptime (0. to 1.)
You can also monitor the both the in and outgoing traffic.
Sending OSC messages from inside VPT
Here are a few ways VPT uses OSC:
In the cuelist you can use the O/o command to send osc messages to any parameter in VPT
O /1layer/fade 0.5
The cuelist also allows you to send OSC messages out from VPT using the X/x command where
you can basically send any command you like.
VPT 7 documentation Page 49
Sending OSC messages to VPT from the outside
There are a lot of applications and devices that support OSC, for instance Processing, MaxJitter,
PD, OpenFrameworks. You can even send osc messages from an arduino (or any other device
that can send data over the serial port, see the serial section for more info).
There are several apps for smartphones and tablets that let you create interfaces on the tablets
and configure OSC messages to work with VPT.
Duration: Free crosspIatform timeIine tooI using OSC
I recommend trying out Duration by James George which gives you another way of controlling
VPT usin OSC. Check out the website for documentation on how to use it.
to make Duration work with VPT you need to set Duration to communicate with the port number
that VPT is looking for incoming OSC messages, which is 6666. Also you need to specify the ip
address (localhost (127.0.0.1) is if you are running Duration on the same computer as VPT).
VPT 7 documentation Page 50
Here are some examples of how you could use Duration with VPT
VideoTrigger and Soundtrigger for VPT 7
There are two extra VPT applications that uses osc to send control data to VPT, using a setup
very similar to the router.
The VideoTrigger lets you use a camera as trigger for events in VPT, the SoundTrigger lets you
control VPT events using sound input. See the appendix for more information.
VPT 7 documentation Page 51
SeriaI communication
VPT can communicate with serial devices like the arduino microcontroller. This means that
sensors and switches can control VPT behaviour but also that VPT can control led lights, motors,
servomotors etc.
In the serial tab you set up the connection to your serial device, arduino will be used in this case.
You set up the device in a similar way as you do with a midi device, by selecting the serial port
from the menu. If you connected your device after you started VPT click the refresh button to the
left of the menu.
VPT 7 documentation Page 52
the sensor moduIe
smooth slider:
Sensors can often give jumpy outputs. The smooth slider gives you the option of less abrupt
changes.
tuner slider:
Sensors often dont respond in the full range of their output. Use the tuner slider to adjust the
range.
Click and drag vertically to adjust the range.
shift+click above the current max to change the max value but keep the min value
shift+click below the current min to change the min value but keep the max value.
option+click and drag vertically inside the current range to change the size of the range.
ctrl(win)/cmd(apple) click and drag vertically to move the current range.
VPT 7 documentation Page 53
sensor input from Arduino to VPT
To send sensor data from an arduino to VPT we need to format the data so VPT understands it.
This is done by putting an identifier (A-H) in front of the data.
So a analogSensor datasample in this example would be formatted A 678 (analog sensor data is
values from 0 to 1024) and the digitalSensor would be for instance B 1
In VPT you need to set the sensormodules to the right id and datatype, so the first module is set to
A and receives analog input while the second module is set to B and digital input.
VPT 7 documentation Page 54
Sending seriaI data from VPT: How to controI Iights, motors etc from
VPT
You can easily control led and motors from VPT using serial out. One way is to do it from the
router, where you choose serial and then s1 to s8, and then the output range.
Notice that in this example controller 1 is set to have a range from 0 to 255 and controller 17 is set
to 0 to 1.
This is because we want the first controller to control a pwm/dimmable output and the other one is
a digital output(on/off)
VPT formats the serial output in a similar way as it receives it: first an id and then the data.
s1 and s2 is translated to 1 and 2 when it comes to the arduino, so the data is formatted like this:
1 127 (dimmed halfway)
2 1 (on)
the sketch on the arduino would look like this
VPT 7 documentation Page 55
with this setup, we could for instance let a lfo waveform control the dimming of a led.
you can also send serial data out from the cuelist using the O/o command
ControIIing a servo motor from VPT
We use the same setup for sending out serial data, but this time the arduino sketch looks a bit
differently. It ignores the data byte and only looks at the id
so we would send /s1 1(or any number) to go to servo position 1 and /s2 1 to go to servo position
2.
You can download the VPT arduino sketches:
http://nervousvision.com/vpt/xtension/VPT7_arduino.zip
VPT 7 documentation Page 56
The seriaI router
The serial router could be useful if you just want to send serial data directly to the router. VPT then
expects values in the range 0-255 (a byte) and converts this to a float number in the range 0. to 1.
You can then map incoming data by selecting an id (A-H) from the menu and associate this id with
a controller nr.
Sending osc formatted messages from Arduino to VPT
a simple sketch for sending osc messages via the serial port, which means you can easily control
a cuelist from an arduino for instance.
More on presets
You can delete a preset by selecting it from the preset list and then click the clear current button
VPT 7 documentation Page 57
If you click on the + sign next to it you get the option to delete all presets.
You can find a detalied overview of the current state of the VPT parameters by clicking on the
current button. This opens a window with a long list of all the values of the different VPT
parameters, which is what gets saved when storing a preset.
VPT 7 documentation Page 58
Clicking on the store button reveals another window, this time with information about the stored
values of the presets you have made.
Similarly for the source presets section you will find buttons for clearing the current or all source
presets, as well as information about currently active values and stored values.
VPT 7 documentation Page 59
VPT 7 documentation Page 60
appendix A: OSC commands
A Iist of avaiIabIe osc commands for VPT 7
(this list is also available online)
each command is described with the command name and what type of message goes with it:
i =integer (-1,0,1,2,3 etc)
f=float (0.1,0.45,2.22 etc)
s=string (prism,black,chess etc)
t=command is a trigger so no additional messages needed
exampIes of syntax
to set the fade level of layer 3 to .5 (half transparent) the osc message would be:
/3layer/fade .5
to set the rate of 1source to 2. (double normal speed) the osc message would be:
/sources/1video/rate 2.
to enter fullscreen the osc message would be:
/fullscreen 1
to play a random clip in 1source the osc message would be:
/sources/1video/random
to send a value of .3 for controller 1 to the router the osc message would be:
/router/1 .3
sources
/sources
/1video,/2video,/3video,/4video,/5video,/6video,/7video,/8video
quicktime module
/clip s name of video
/clipnr i (relative position in sourcemenu, 0:off, 1:first video, 2:second video etc)
/rate f (1. normal speed, -1 normal speed backwards)
/loop i (0:loop off, 1:loop,2:palindrome(loop backnforth),3:loop once)
/xfade f (0.,1.)
/resolution i (0:full,1:2/3,2:1/2,3:1/3,4:1/4,5:1/8,6:1/16)
/trig t
/on i (0,1)
/vol f (0.,1.)
/pan f (0.,1.)
/loopreport i (0,1)
/last t play last clip in the menu (often used together with recording live source directly to a
source folder)
/random t
/scrub f (0.,1.)
/start t
/stop t
/in f (0.,1.) relative in-point
/out f (0.,1.) relative out-point
/loopreset t
VPT 7 documentation Page 61
/playlist i i i . (list of clipnumber to be used in playlist)
/play i (0,1) activate playlist
/cliptime i (0,1) report cliptime
/alpha i (0,1) use video with alpha channel (default:0)
/com
still module
/clip s
/clipnr i
/xfade f
/resolution i
/refresh i (0:33ms,1:100ms,2:500ms,3:2000ms) how often still image is refreshed
/on i
/playlist i i i i.
/play i
/slide_length f (time in seconds)
mix module
/A i (0:off,1:1video,2:2video etc according to sourcelist in menu)
/B i (0:off,1:1video,2:2video etc according to sourcelist in menu)
/mix f (0.,1.)
/mixtype i (blendmode 0:normal alphablend, the others according to blendmode list in menu)
hap module
/clip s
/clipnr i
/rate f
/loop i
/xfade f
/on i
/trig t
/vol f
/pan f
/loopreport t
/last t
/random t
/scrub f
/start t
/stop t
/in f
/out f
/loopreset t
/playlist i i i i.
/play i
/1cam,/2cam
/on i (0,1)
/rec i (0:off,1:on)
/recdest (0:none, 1-8:1video-8video)
/1solid,/2solid
/on i (0,1)
/resolution i (0:4 3,1:80 60,2:320 240,3:640 480,4:1024 768) pixelsize
VPT 7 documentation Page 62
/refresh i (0:33ms,1:100ms,2:500ms,3:2000ms) how often solid source is refreshed
/1syphon,/2syphon,/3syphon,/4syphon
/on i (0,1)
/update t (check for new syphon servers)
/server s servername
/serverlist i (from server list)
Iayer
/1layer,/2layer etc /0layer: active layer
/fade f (0.,1.)
/rgb f f f (0.,1.)
/color f f f f (rgba 0.,1.)
/dcolor i i i (rgb 0,255)
/red f (0.,1.)
/green f (0.,1.)
/blue f (0.,1.)
/blendmode i (0:normal, 1:additive, 2:multiply)
/layername s
/layerorder i
/scalex f
/scaley f
/posx f
/posy f
/cornerpin
/upper_left f f (x y 0.,1.)
/lower_left f f (x y 0.,1.)
/upper_right f f (x y 0.,1.)
/lower_right f f (x y 0.,1.)
/com direct messages to jit.gl.cornerpin
/source s (1video,2video etc)
/flip
/on i (0,1)
/fliptype i (0: normal,1:hor flip,2:ver flip,3:hor+ver flip)
/tile
/on i (0,1)
/xtile i (0,14 0:normal, 1: 1/2, 2: 2/2, 3: 1/3,..14: 5/5)
/ytile i (0,14 0:normal, 1: 1/2, 2: 2/2, 3: 1/3,..14: 5/5)
/zoom
/on i (0,1)
/xzoom f
/yzoom f
/xanchor f
/yanchor f
/rota f
/blur
/on i (0,1)
/blur f
/mblur
/on i (0,1)
/mblur f
/brcosa
/on i (0,1)
VPT 7 documentation Page 63
/brightness f
/contrast f
/saturation f
/mask
/on i (0,1)
/source s (maskname)
/inv i (0,1)
/blur_on i (0,1)
/blur f
/switch i (0,1)
/moving i (0,1) use moving mask (requires a quicktime video in mask folder)
/points list (f,f,f,f.f,f) list ifof x y points of mask
/edgeblend
/on i (0,1)
/left f (0.,1.)
/down f (0.,1.)
/right f (0.,1.)
/up f (0.,1.)
/inv i (0,1)
/mesh
/on i (0,1)
/gridsize i
/position (f,f,f,f.f,f) list ifof x y points of mesh
/trig
presets
/preset i go to specified preset
/presetprev t
/presetnext t
/store0 store current state of VPT to temporary preset 0
cues
/cue i go to specified cue
/cuenext t
/cueprev t
/cueplay i (0:edit,1:play)
sourcepresets
/sourcepreset i go to specified source preset
/sourcenext t
/sourceprev t
router
/router
/1(/2,/3 etc) f lets you send controller data to the router
/router-preset i switch between the stored router presets
Ifo
/1lfo /2lfo /3lfo /4lfo /5lfo /6lfo /7lfo /8lfo /9lfo /10lfo
/speed f 1. is normal speed
/phase f
/val f
/range f
VPT 7 documentation Page 64
/lfomix f (0.,1.)
/on i (0,1)
/wave (0:sine,1:ramp,2:triangle,3:square)
/waveinv i (0,1)
seriaI communication
/serial
/s1(/s2,/s3,/s4,/s5,/s6,/s7,/s8,/s9) f/i/s sends formatted messages out the serial port /s1 .5
appears as 1 .5
osc out (default destination 127.0.0.1 port 6667)
these messages are sent out from VPT using OSC, if osc out is enabled in the osc-editor tab.
loopreport and cliptime report needs to be turned on for the corresponding sources
(which you can do in the clip control tab or using /sources/1video/loopreport 1 /sources/1video/
cliptime 1).
/preset i
/cue i
/cuetrig t
/transitiondone t
/loopreport i t sourcenr bang
/cliptime i f sourcenr relative cliptime (0. to 1.)
div
/onoff i (0,1) turn VPT engine on/off
/fullscreen i (0,1)
/focus i (make layer i the active layer)
/copy t copy from current active layer
/paste t paste to current active layer
/cornerselect i (1 UL,2 UR, 3 LL, 4 LR)
/corner_xy f f (xy position of active corner 0. to 1.)
/drawcorners i (0,1)
/mastercorner
/enable i (0,1)
/draw i (0,1)
/reset t
/blind i (0,1) freezes video on the output window, let you continue to work on preview window
/blackout i (0,1) makes output window black while you can continue to work on preview window
/masterfade f (0.,1.) a masterfader for all layers
/framerate i framerate for output (default set to 30 fps in prefs)
/pframerate i framereate for preview window (default set to 15 fps in prefs)
VPT 7 documentation Page 65
appendix B: VPT trimmer
You can download it here:
http://nervousvision.com/vpt/xtension/VPT_trimmer-mac.mxf.zip
http://nervousvision.com/vpt/xtension/VPT_trimmer-win.mxf.zip
VPT trimmer makes it easy to make quick edits to a video and save it as a new clip, change the
compression type (to for instance photo jpeg or apple prores instead of mp4 or h264) or change
the resolution of the clip (no need to use full res HD if you will use the source in a small layer).
when you click the export button you enter the name of the video and the location where you want
to save it. If you want to do changes to compression type or resolution click on the options button.
by clicking on settings and size you can adjust according to your need before exporting. The
export process itself might take a bit of time depending on the size of your clip, be patient.
VPT 7 documentation Page 66
appendix C: VPT 7 Video Trigger
The VPT 7 video trigger is a modification of Zach Poffs video trigger patch (he has made a lot of
very powerful software, available for free at his website zachpoff.com)
It lets you create up to 6 zones which can trigger events in VPT.
You can download the program here:
VPT7 videotrigger mac
VPT7 videotrigger win
It works by using background detection, so first you need to memorize an empty background.
Then create zones, by first selecting one of the zones, and then click and drag inside the video
window. Turn on/off a zone by clicking on the on/off button.
The lower section of the trigger is the router section, more or less identical with the router in VPT,
with a few differences:
The control numbers here refer to the zones (1-6). In the last column you can set how the router
should interpret the trigger. The normal behaviour is that you get a 1 when you trigger a zone and
a 0 when you exit it. Sometimes you might only want the trigger to work when entering a zone,
then you should choose "in".
For instance if you want a zone to trigger a random clip in a videosource you would get a
doubletrigger if using toggle mode, so first you would get a randomtrigger when the zone is
triggered but also when it is deactivated. So this would be a place to use the "in" setting.
You might want to trigger completely different events from one zone. Then you can have one
router line handling the activation of the zone (in) and another line handling the deactivation (out).
If working from a different computer than VPT remember to set the ip address. Port number is
always 6666.
NB! You cant use the same camera source both for Video Trigger and VPT
VPT 7 documentation Page 67
VPT 7 documentation Page 68
Appendix D:SoundTrigger_VPT7
Similarly, the Soundtrigger VPT app lets you use sound input to control VPT parameters. Here the
controller numbers are the right and left channels of a stereo input.
Click on the microphone symbol to turn on the sound, click on the sound settings button to
configure your input.
Notice how you can modify each channel using amplification, smooth and threshold.
TroubIeshooting Mavericks
On newer mac os you might get problems opening VPT since Apple doesnt trust independent
unregistered developers (like me). Simply ctrl-click on VPT and then choose open to bypass this
annoyance (you only need to do it the first time).
On mavericks when you work with multiple monitors the default is now to have a menubar on each
monitor. This is problematic for VPT fullscreen mode since you dont want a menubar. Go to
system preferences: mission control and disable "displays have separate spaces".
VPT 7 documentation Page 69