Catalog UK

17th Edition Electrical Installation Testers Power Quality Analysis High Voltage Insulation Diagnostics Appliance / Machine / Switchboard
ard Safety LAN Cabling Certication Indoor Environment Quality Digital Multimeters / Clamp Meters / Voltage and Continuity Testers
TECHNICAL CATALOGUE
2010
Metrel UK; Unit 1, Hopton House, Ripley Drive; Normanton, West Yorkshire, WF6 1QT
www.metrel.co.uk
MEASURING INSTRUMENTS AND TESTERS
Instruments Designed with Future in Mind

METREL is one of the world leading manufacturers and distributor of high quality electrical measurement and test instruments, providing the market with innovative solutions on the following segments: 17th Edition Installation Testers Metrel provides single and multifunctional electrical installation testers. The testers are used for initial and periodic testing of domestic and industrial installations, testing of single and multiphase systems and testing of TT, TN, IT and 110 V systems. Metrel meters enable a selection of functionalities and measurements (depending on the model), can be downloadable or non-downloadable. All meters comply with the 17th Edition BS7671 and Part P requirements. Power Quality Analysis The power quality testers can be widely used for general power quality assessment in distribution and industrial low and middle voltage electric systems (according to EN 50160), capturing and recording of power supply events, icker measurement, power factor correction measurements, harmonics measurements, transients recording and over-voltage protection devices performance testing, assessment of UPS, consumption prole recording, ect. High Voltage Insulation Diagnostics Metrels high voltage diagnostic equipment (5 - 10 kV) is used for testing insulation resistance of rotating machinery and cables, production line periodic testing and maintenance, troubleshooting and analysis of all kinds of insulation problems. It gives effective readings in high noise environments such as high voltage substations and switchyards. Some of key features (depends on the model) are PI, DD, DAR testing, R(t) graph, High 5 mA charging current, selectable noise rejection lters. Appliance / Machine / Switchboard Safety Metrels testers can be used in professional PAT testing, general PAT testing, factory/warehouse PAT testing, Multi-location PAT testing and after repair safety testing. Metrels testers enable a selection of key features (depending on model) for example auto-sequencing, automatic testing and Pass/Fail evaluation, RCD testing, project uploading, BAR coding system and PASS/FAIL barcode label printing, ash test, tests both 230 V appliances and 110 V appliances and much more. LAN Cabling Certication Metrels LAN testers (copper and beroptic) are designed to be used for verication of LAN networks up to CAT6/Class E, testing ber link performance and verication of ber networks, troubleshooting and fault nding of connections/links, troubleshooting in IT networks. Combined MI 2016 and MI 5100 can create a cost effective solution for the verication of ber and copper LAN networks. Environmental Testers The meters are used for indoor areas, factory conditions, industrial process monitors, power stations, ofces, domestic dwellings, indoor or dry outdoor sound level measurement, industrial sound measurement, band-pass and acoustic lter testing, working environment testing, calibration work, acoustic equipment testing and much more. The users are coming form the HVAC industry, maintenance people, lab mangers and others elds. Digital Multimeters / Clamp Meters / Voltage and Continuity Testers The DMMs, clamp meters and voltage continuity testers are used for general / basic testing up to high level industrial testing, electronic fault nding, eld servicing and heavy duty electrical testing. Some of the key features are (depending on the model): TRMS testing, high accuracy, temperature measurement, lead alert, conductance, PC communication, autocheck function, recording and much more.
Metrel UK
Customer commitment Sales and Marketing operate from our premises in Normanton, having a supporting network of independent distributors. Metrel UK provides to its customers, a complete service including calibration and repairs, technical support and after sales service. Commitment to quality Metrels quality assurance system is based on BS EN ISO 9001. We continue to achieve and maintain this standard through continuous training of our staff and in the design of our instruments. Our commitment to quality is recognized by our customers and is ensured by a continuous and extensive research and development of new accurate, reliable and safe to use products. Services Metrel UK is also providing a selection of Services: Calibration Standard & Express services, including next day and same day Call N Cal. Repair UK based repair & service centre. SmartWater - make it safe SmartWater forensic security marking for meters and accessories. Checkpoint Interim spot checks on all settings, certicate provided. Where to get a Metrel meter? Metrels products are available from a range of electrical distributors in the UK. To nd your preferred stockist please call our advice line on 01924 24 5000 and we will make sure that you get your product on time.
Technical Helpline Call: 01924 24 5000 Free Technical Advice from our experienced technicians from 8.00 am until 5.00 pm.
Ordering information Sales / Technical & Customer Support Tel.: (0)1924 24 50 00 Fax: (0)1924 24 50 07 E-mail: infometrel.co.uk Web: www.metrel.co.uk
Metrel UK Unit 1, Hopton House,

Bespoke Trainings on how to use Metrels meters To be able to use Metrels products to the full potential our engineers can provide you with a bespoke training at your or our premises. For a quote please call our Technical Helpline.
Ripley Drive Normanton Industrial Estate Normanton, West Yorkshire WF6 1QT
Medi-Cal Service / refurbish your old meter Full service of all the mechanically actuated components, new rmware & full adjustment. Calibration & service certicates included.
Contents
17th Edition Electrical Installation Testers 1.1 - 1.40 Lan Cabling Certication 5.1 - 5.08
Power Quality Analysis 2.1 - 2.18
Indoor Environment Quality 6.1 - 6.12
High Voltage Diagnostics 3.1 - 3.12
Digital Multimeters / Clamp Meters / Voltage and Continuity Testers 7.1 - 7.19
Appliance / Machine / Switchboard Safety 4.1 - 4.26
Electrical Installation Testers
17th Edition Electrical Installation Testers Power Quality Analysis High Voltage Insulation Diagnostics Appliance / Machine / Switchboard Safety LAN Cabling Certication Indoor Environment Quality Digital Multimeters / Clamp Meters / Voltage and Continuity Testers
Glossary - Testing the Safety of Electrical Installation MULTIFUNCTIONAL TESTERS Selection Guide for Multifunctional Testers Basic Testers MI 3000 EurotestEASI Plus MI 3125 EurotestCOMBO MI 3100 EurotestEASI Professional Downloadable Testers MI 3002 EurotestDL MI 3125B EurotestCOMBO MI 3102 EurotestXE Specialist Downloadable Testers MI 3101 EurotestAT MI 3105 EurotestXA SINGLE FUNCTION TESTERS Professional range MI 3121 Insulation / Continuity MI 3122 Z Line-Loop / RCD MI 3123 Earth / Clamp Basic Testers MI 2126 Earth 2/3 MI 3103 GigaOhm 1 kV A 1143 Euro-Z A Tester Adapters/Calibrations Set A 1199 adapter A 1214 EASI Switch CS 2090 Europrove HC 30S, HC 60M and HC 90L Hardcase ACCESSORIES 1 - 02 1 - 04 1 - 06 1 - 08 1 - 10 1 - 12 1 - 14 1 - 16 1 - 18 1 - 20 1 - 22 1 - 24 1 - 26 1 - 28 1 - 29 1 - 30 1 1 1 1 1 - 31 - 32 - 33 - 34 - 35
TECHNICAL CATALOGUE
2010
Compliant with BS7671:2008 17th Edition and Part P of Building Regulations
17th Edition Installation Testers Glossary - Testing the Safety of Electrical Installation
All in one insulation testing A full automated procedure where the resistance between L-N, L-PE and N-PE are all performed with the single press of the test button. Autosequence Autosequencing is a method by which a series of installation tests are performed with a single press of the test button. By pressing the test button, the instrument will automatically start working through the list of tests, pausing where appropriate. Autosequence testing can be up to 5 times faster than conventional methods. Continuity resistance test A 200 mA resistance test to ensure that the resistance between two points is sufciently low for the application. Dead testing Testing on circuits that do not have a voltage applied to them (e.g. a continuity or insulation test). Electrical Installation safety testing This is a combination of dead circuit and live testing. The dead circuit tests are: Continuity. Insulation. Earth resistance testing. Live testing includes: Voltage measurement. Phase sequence. Line impedance measurement. Loop impedance measurement. RCD testing. These tests are performed in order to ensure that the requirements are met for the protection of persons, livestock and property against the risk of electric shock and to ensure that the automatic disconnection of the supply is performed correctly. Earth resistance testing Earth resistance testing is used on TN, TT and IT systems to ensure that the resistance of the earth electrode is sufciently low so that, in the case of a fault, a dangerous voltage does not appear on any parts of the installation or on any appliances which have a connection to earth. Insulation resistance The insulation is intended to prevent any contact with live parts and withstanding mechanical, chemical, electrical and thermal stresses. The insulation resistance test is performed with a D.C. voltage on a dead system and the resistance must be above the minimum limit set out in the appropriate standards and regulations. Loop impedance test This is a live test used to measure the fault loop impedance between the line and earth conductor (sometimes the neutral is required to prevent an RCD/RCBO from tripping during the test). This function can be used for both Z(e) and Z(s) testing. Live testing Performing tests on circuits that have a voltage applied to them (e.g. an RCD trip time test) Line impedance test This is a live test used to measure the impedance between the line and neutral conductor or between lines on a 3-phase system. Loop impedance tables Various RCDs, fuse types and ratings can be selected on the test instrument. When a loop test is performed, the measured value is automatically compared to the maximum values set out in the standards (BS7671:2008) and either a PASS or FAIL symbol will appear on-screen to inform the user if the measurement is within the required limits. Phase rotation A test used for determining the phase sequence of a 3-phase system. Example results displayed on the tester are (1.2.3), (2,1,3). RCD Auto An automated function which performs RCD testing at x1/2, x1 and x5 current multipliers at both 0 and 180 automatically. This removes the need to walk repeatedly between the RCD and the test instrument to measure trip-times. RCD Ramp test A test which slowly ramps up the current between line and PE conductor until the RCD/RCBO trips. After this test, the current required to trip the RCD is displayed which can then be used to nd the cause of nuisance tripping occurring in a circuit. Structure building Design buildings in the instrument as they are laid out in the installation. This includes the distribution boards, circuits, sub-distribution boards and earth connections. This visual interpretation of the electrical installation makes the saving and recalling of test results quick and simple.
.
Accessories: page 1.35
17th Edition Installation Testers
Trip-lock A method of performing a loop test on RCD protected circuits without tripping the RCD. All Metrel multifunctional testers have the non trip facility. The TripLock function is ZLoop (RCD) MI 3000 tester, Z(s) RCD testing MI 3100, MI 3002, MI 3102; Z-loop (protection: RCD) MI 3101, MI 3105. Tip commander An electronic remote to help make continuity, insulation testing easier by placing the test button and either memory or backlight button in the hand of the electrician. Available as a 2-wire tip commander or 3-wire tip-commander that allows loop and RCD testing. Time delayed (S-type) RCDs As the changes to BS7671:2008 (also know as the 17th Edition) have come into force, the requirements for residual current device (RCD) protection of circuits has increased. In situations where multiple RCDs occur in an installation, the need to discriminate or co-ordinate when the RCDs will trip has become more important. If a 100mA RCD and a 30mA RCD are protecting the same circuit (e.g. one at source and one on the individual circuit) and a fault above 100 mA occurs, it may not always be the case that the 30 mA RCD trips rst (e.g. the 100 mA RCD could have a faster response time in the case of a fault). In this situation, a time delayed or S-type RCD is required at the source of the installation so that the 30 mA RCD has time to trip and, if the problem is caused by a none RCD protected circuit, the supply is still safely disconnected. Not all installation test instruments have the ability to check time delayed or S-type RCDs. Therefore as RCDs become more commonplace, it is useful to have a test instrument that has the ability to test them. All
Metrels multifunctional test instruments and single function live circuit testers have the ability to test both general and time delayed RCDs providing you with the peace of mind that you are prepared for whatever the future may hold. Online Voltage Monitoring Built into all of Metrels MI3000 series multifunctional installation testers is the online voltage monitoring function. This function displays on one screen the AC voltages and frequency occurring between L to PE, L to N and N to PE (single phase systems) and L1 to L2, L2 to L3 and L3 to L1 (3-phase systems). This feature is very useful for fault nding on systems e.g. quickly identifying incorrect connections, disconnected wires and incorrect voltages.
causing light bulbs to blow, causing insulation between conductors to break down and, in the case of high energy transients causing appliances connected to the supply to set on re or produce dangerous sparks. The less protection provided against these transients enables higher energy transients to occur (i.e. If lightning strikes the power lines, you would not expect the full fault voltage to occur at the power supply socket on the wall in your house). The level of danger due to transients is therefore divided into categories. This is illustrated in the diagram below:
Safety CAT Ratings Transients are very fast, high energy spikes that can occur on the mains power supply. Low energy transients can be caused by simply turning on a switch to a circuit or electromagnetic interference while high energy transients can be caused, for example, by a powerful motor stalling or a lightning striking a power line. Transients can have a variety of effects which could include blowing the protective fuse in the appliance,
The higher the CAT rating of your test instrument, the more protection it will give you in the case of a fault occurring on the system under test (e.g. A CAT IV/300 V installation test instrument provides signicantly more protection to the user in the case of a fault than a CAT III/300 V installation test instrument). All Metrels MI 3000 series multifunctional test instruments are rated CAT IV/300 V. CAT IV 300V means that the instrument is suitable for testing up to CAT IV locations up to 300 V between line and earth and, due to the relationship set out in IEC/EN 60364, testing in CAT III locations up to 600 V between Line and Earth.
. 3
17th Edition Installation Testers Selection Guide for Multifunctional Testers

BASIC TESTERS
Part No. Test MI 3000 MI 3125 EurotestEASI Plus EurotestCOMBO MI 3100 EurotestEASI
Features Description INSULATION EN 61557-2 With DC voltage Range All-in-one insulation test (L-PE, N-PE, L-N) Adjusting test time to capacitance of load Automated R1+R2 testing R low 200 mA DC Range Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) High accuracy TRIP LOCK impedance Built-in loop impedance tables for automatic PASS/FAIL decision RCD type (general & selective) RCD trip time measurement Ramp test RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement Simultaneous voltage measurement over 3 phases Frequency measurement L1 - L2 - L3 Three wire resistance Two wire resistance One clamp & three wire resistance Two clamps High noise immunity with two clamps Specic earth resistance Autotest of insulation on all conductors L-N-PE AUTOSEQUENCE procedure on switchboard AUTOSEQUENCE procedure on circuit Automatic evaluation of safety, based on all measured values LUX light measurement (A 1172 & A 1173) TRMS leakage current Medical sites (IT RMD test) Varistor overvoltage Fuse/fault locator (A 1191) High resolution loop impedance (m) (A 1143) Frequency span Supports 110 V systems TN / TT / IT earthing system mode Touch electrode HELP menu RS232 USB Number of memory locations EuroLink PRO EuroLink PRO Plus (A 1292) Safety category In-built battery charger Batteries Weight Size (mm) 100 - 1000 V 0 - 1000 M 50 - 1000 V 0 - 999 M 100 - 1000 V 0 - 1000 M
CONTINUITY EN 61557-4
LINE/LOOP EN 61557-3
0 - 1999 A, AC
0 - 1999 A, AC
RCD EN 61557-6
VOLTAGE FREQUENCY PHASE SEQUENCE
0 - 1999 A, AC
EARTH EN 61557-5
AUTO SEQUENCE TESTS
OTHER MEASUREMENTS
SPECIAL FUNCTIONALITIES ON LINE WARNINGS/ INFORMATION COMMUNICATION PORTS SOFTWARE MEMORIES
45 - 65 Hz //
45 - 65 Hz //
45 - 65 Hz //
GENERAL DATA
CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
CAT IV/300 V 6 x AA 1.0 kg 230 x 140 x 80
CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
.
MI 3002 EurotestDL
PROFESSIONAL DOWNLOADABLE TESTERS

MI 3125B EurotestCOMBO
MI 3102 EurotestXE
SPECIALIST DOWNLOADABLE TESTERS

MI 3101 EurotestAT MI 3105 EurotestXA
W
A
YE
RRAN
ARS
3 years manufactures waranty
TY
Autosequence
100 - 1000 V 0 - 1000 M 50 - 1000 V 0 - 999 M 100 - 1000 V 0 - 1000 M 50 - 1000 V 0 - 1000 M Optional 0 - 1999 A, AC, B 50 - 1000 V 0 - 1000 M Optional 0 - 1999 A, AC, B 3 A and more Optional Optional Optional Optional 15 - 500 Hz // 2000 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
/
L3 L1 L2
Pass fail evaluation
0 - 1999 A, AC
0 - 1999 A, AC, B
0 - 1999 A, AC
Phase Sequence
Triplock
Earth
Clamp measurement
RCD
auto
Optional Optional Optional Optional Optional 15 - 500 Hz // 2000 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
RCD auto test
CAT IV
600 V
Safety category
Help SOS
Help menu
45 - 65 Hz // 500 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
Loop Z
Loop impedance tables
Rechargeable
Downloadable
.
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Basic Tester MI 3000 EurotestEASI Plus
BS7671:2008 (17th Edition) and Part P Multifunctional Installation Tester
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3000 EurotestEASI Plus is a fast, accurate and easy to use rechargeable installation tester which is popular with both new and experienced users. The large, bright LCD screen is perfect for working in dark conditions while the online voltage monitoring system and phase sequencing facility enable this unit to work extremely well on both single phase and 3 phase systems. Performs continuity, insulation, RCD, loop, line, voltage and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 100 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. STANDARDS: Functionality: EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; CEI 64.8; HD 384; VDE 413 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
.

TECHNICAL SPECIFICATION:
INSULATION EN 61557-2 CONTINUITY EN 61557-4 With DC voltage Range R low 200 mA DC Range Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) High accuracy TRIP LOCK impedance RCD type (general & selective) RCD trip time measurement Ramp test RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement Simultaneous voltage measurement over 3 phases Frequency measurement L1 - L2 - L3 Frequency span Supports 110 V systems TN / TT/ IT earthing system mode 100 - 1000 V 0 - 1000 M 0 - 1999 A, AC 45 - 65 Hz // CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
KEY FEATURES
LINE/LOOP EN 61557-3
RCD EN 61557-6
Large LCD screen with backlight
VOLTAGE FREQUENCY PHASE SEQUENCE SPECIAL FUNCTIONALITIES
ON LINE WARNINGS / Touch electrode INFORMATION Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm)
User friendly keyboard enables simple and fast adjustment.
ORDERING INFORMATION: Part No. MI 3000 Description EurotestEASI Plus
STANDARD KIT INCLUDES: Part No.

MI 3000 A 1003 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A1062 20901041 A 1289
Description
EurotestEASI Plus Mains plug Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Test probe (green) Carrying neck strap Soft carrying bag Short instruction manual Instruction manual on CD Calibration certicate
.
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Basic Tester MI 3125 EurotestCOMBO
Standing 17th Edition and Part P Multifunctional Installation Tester
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3125 EurotestCOMBO is a pioneering instrument by Metrel. The instruments upright design with built-in stand tilts the large, backlit LCD display directly towards the test engineer when stood on a surface. When no surface is available, the instrument can be held in the hand or attached to any metal surface due to its magnetic back. The large buttons and intuitive menu system make the MI 3125 EurotestCOMBO easy to operate while the built in help screens and fault loop impedance tables become invaluable tools for the electrician who is always on the go. KEY FEATURES: Automatic loop evaluation: builtin loop impedance tables allow automatic evaluation of loop impedance compared to the regulations. Help screens: unit comes complete with in-built help screens for referencing on site. Online Voltage Monitoring: Monitors all 3 voltages in real-time. Upgradeable: If changes occur to the regulations, changes can be made to the unit to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation: wide range of insulation test voltages from 50 V to 1000 V, reading up to 999 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Built-in charger & rechargeable batteries: Unit has an in-built charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD Auto: Automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT and TN systems. STANDARDS: Functionality: IEC/EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; AS/NZ 3018; CEI 64.8; HD 384; VDE 0413 Electromagnetic compatibility (EMC): EN 61326-1; IEC/EN 61326-2-2 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
.

With DC voltage Range R low 200 mA DC CONTINUITY Range EN 61557-4 Automatic polarity swap Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP High accuracy TRIP LOCK impedance EN 61557-3 Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement RCD Ramp test EN 61557-6 RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement VOLTAGE Simultaneous voltage measurement over 3 phases FREQUENCY Frequency measurement PHASE SEQUENCE L1 - L2 - L3 Frequency span SPECIAL FUNCTIONALITIES TN / TT/ IT earthing system mode ON LINE WARNINGS / Touch electrode INFORMATION HELP menu Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) INSULATION EN 61557-2 50 - 1000 V 0 - 999 M 0 - 1999 A, AC 45 - 65 Hz // CAT IV/300 V 6 x AA 1.0 kg 230 x 114 x 80 Large LCD screen with backlight
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3125 Description EurotestCOMBO

MI 3125 A 1003 A 1296 A 1147 83005447 83005401 A 1015 A 1298 A 1062 A 1310 A 1297 A1062 A 1303
Description
EurotestCOMBO Mains plug Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Hand strap Short instruction manual Instruction manual on CD Calibration certicate
.
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Advanced range MI 3100 EurotestEASI
BS7671:2008 (17th Edition) and Part P Multifunctional Installation Tester with Help Screens and Loop Impedance Tables
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3100 EurotestEASI is true work horse when it comes to modern day testing. Containing all the features of its brother, the MI 3000 EurotestEASI Plus (a fast, accurate and easy to use rechargeable installation tester), the MI 3100 EurotestEASI also incorporates full schematic help screens for each test, describing exactly how to connect the instrument into the installation and how to perform a test. The unit also contains a fully upgradeable list of fault loop impedance limits for PASS/FAIL evaluation according to modern day regulations and the unit comes complete with a Tip Commander to make installation testing a fast and easy process. Performs continuity, insulation, RCD, loop, line, voltage and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Help screens: unit comes complete with in-built help screens for referencing on site. Automatic loop evaluation: built-in loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations. Tip commander: unit comes complete with a tip-commander to simplify continuity and insulation testing. Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 100 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. STANDARDS: Functionality: EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; CEI 64.8; HD 384; VDE 413 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 10

With DC voltage Range R low 200 mA DC Range CONTINUITY EN 61557-4 Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP High accuracy TRIP LOCK impedance EN 61557-3 Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement RCD Ramp test EN 61557-6 RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement VOLTAGE Simultaneous voltage measurement over 3 phases FREQUENCY Frequency measurement PHASE SEQUENCE L1 - L2 - L3 Frequency span SPECIAL Supports 110 V systems FUNCTIONALITIES TN / TT/ IT earthing system mode ON LINE WARNINGS / Touch electrode INFORMATION HELP menu Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) INSULATION EN 61557-2 100 - 1000 V 0 - 1000 M 0 - 1999 A, AC 45 - 65 Hz // CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115 Large LCD screen with backlight
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3100 Description EurotestEASI

MI 3100 A 1175 A 1003 20901041 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309 A 1289
Description
EurotestEASI Tip commander ( 2-wire, 1.5 m) with a spiral cable Mains plug Carrying neck strap Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Soft carrying bag Short instruction manual Instruction manual on CD Calibration certicate
. 11
17th Edition Installation Testers MULTIFUNCTIONAL TESTER - Professional range MI 3002 EurotestDL
BS7671:2008 (17th Edition) and Part P Downloadable Multifunctional Installation Tester with Help Screens and Loop Impedance Tables
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3002 EurotestDL is the ideal unit for engineers who perform high volume testing or work regularly on TT, TN and 110V systems. Containing all the necessary tests for installation testing, the MI 3002 EurotestDL can also perform online voltage monitoring and phase sequence testing. All the results can be quickly saved and referenced on the unit while out on site and can be downloaded via the A 1291 EuroLink PRO software, included in the standard set, to the computer for evaluation of report generation after testing (A 1292 optional upgrade to EuroLink PRO Plus software which enables automatic printing to NICEIC forms). Performs continuity, insulation, RCD, loop, line, voltage and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit. Help screens: unit comes complete with in-built help screens for referencing on site. Automatic loop evaluation: built-in loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations Tip commander: unit comes complete with a tip-commander to simplify continuity and insulation testing. Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 100 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. STANDARDS: Functionality: EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; CEI 64.8; HD 384; VDE 413 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 12

With DC voltage Range R low 200 mA DC CONTINUITY Range EN 61557-4 Automatic polarity swap Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP High accuracy TRIP LOCK impedance EN 61557-3 Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement RCD Ramp test EN 61557-6 RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement VOLTAGE Simultaneous voltage measurement over 3 phases FREQUENCY Frequency measurement PHASE SEQUENCE L1 - L2 - L3 Frequency span SPECIAL Supports 110 V systems FUNCTIONALITIES TN / TT/ IT earthing system mode ON LINE WARNINGS / Touch electrode INFORMATION HELP menu RS232 COMMUNICATION PORTS USB Number of memory locations SOFTWARE EuroLink PRO MEMORIES EuroLink PRO Plus (A 1292) Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) INSULATION EN 61557-2 100 - 1000 V 0 - 1000 M 0 - 1999 A, AC 45 - 65 Hz // 500 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
KEY FEATURES
EuroLink PRO enables the following acivities: - data downloading, - creation of simple report, - export of measured data to spreadsheet. EuroLink PRO Plus can print onto NICEIC certicates.
ORDERING INFORMATION: Part No. MI 3002 Description EurotestDL

MI 3002 A 1176 A 1003 20901041 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309 A 1289 A 1291
Description
EurotestDL Tip commander (2-wire, 1.5 m) with a spiral cable Mains plug Carrying neck strap Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Soft carrying bag EuroLink PRO with USB cable and RS232 cable Short instruction manual, Instruction manual on CD, Calibration certicate
. 13
17th Edition Installation Testers MI 3125B EurotestCOMBO

Standing Downloadable (17th Edition) and Part P Multifunctional Tester with Automatic R1 + R2 testing and Earth Spike Testing
YE
RRAN
ARS
L3 L1 L2
TY
Building on the ideals and principles of the MI 3125 brings about the MI 3125B EurotestCOMBO. This marvelous unit contains all the standard tests of a normal multifunction tester with an array of extra features including automated R1+R2 testing via the A 1214 Easi-switch, 3-wire earth spike testing and the ability to download test results onto a computer by RS232 or USB cables (included in the standard set). As alternatives sources of power are developed, so does Metrel and built into the MI 3125B EurotestCOMBO is the ability to test B-type (AC, pulsating DC and DC sensitive) Residual current devices. KEY FEATURES: Automated R1+R2: using the A 1214 Easi-switch, the unit can signicantly reduce the time taken to perform R1+R2 testing. Automatic loop evaluation: builtin loop impedance tables allow automatic evaluation of loop impedance compared to the regulations. B-type RCD testing: instrument can test AC sensitive RCDs, pulsed DC sensitive RCDs and DC sensitive RCDs. Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit. Help screens: unit comes complete with in-built help screens for referencing on site. Upgradeable: If changes occur to the regulations, changes can be made to the unit to keep the unit up to date. Earth spike testing: unit performs both 2 and 3 wire earth spike testing. Online Voltage Monitoring: Monitors all 3 voltages in real-time. Polarity swap: automatic polarity reversal on continuity test. Insulation: wide range of insulation test voltages from 50 V to 1000 V, reading up to 999 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Built-in charger & rechargeable batteries: Unit has an in-built charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD Auto: Automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT and TN systems. STANDARDS: Functionality: IEC/EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; AS/NZ 3018; CEI 64.8; HD 384; VDE 0413 Electromagnetic compatibility (EMC): EN 61326-1; IEC/EN 61326-2-2 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 14

With DC voltage Range Automated R1+R2 testing R low 200 mA DC CONTINUITY EN 61557-4 Range Automatic polarity swap Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP High accuracy TRIP LOCK impedance EN 61557-3 Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement RCD Ramp test EN 61557-6 RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement VOLTAGE Simultaneous voltage measurement over 3 phases FREQUENCY Frequency measurement PHASE SEQUENCE L1 - L2 - L3 Three wire resistance EARTH EN 61557-5 Two wire resistance Frequency span SPECIAL FUNCTIONALITIES TN / TT/ IT earthing system mode ON LINE WARNINGS / Touch electrode INFORMATION HELP menu RS232 COMMUNICATION PORTS USB Number of memory locations SOFTWARE EuroLink PRO MEMORIES EuroLink PRO Plus (A 1292) Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) INSULATION EN 61557-2 50 - 1000 V 0 - 999 M 0 - 1999 A, AC, B 45 - 65 Hz // 1700 Optional CAT IV/300 V 6 x AA 1.0 kg 230 x 140 x 80
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3125B Description EurotestCOMBO

MI 3125B A 1003 A 1296 A 1147 83005447 83005401 A 1015 A 1298 A 1062 A 1310 A 1297 A 1062 A 1291 A 1303 A 1214
Description
EurotestCOMBO Mains plug Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) EuroLink PRO with USB cable and RS232 cable Hand strap Easi-switch Short instruction manual Instruction manual on CD Calibration certicate
. 15
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Professional range MI 3102 EurotestXE
BS 7671:2008 (17th Edition) and Part P Downloadable Multifunctional Installation Tester with Help Screens, Loop Impedance Tables and with earth spike, TRMS current and LUX testing.
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3102 EurotestXE is the ideal unit for engineers who perform high volume testing or work regularly on TT systems. Performing all the necessary tests for installation testing, the MI 3102 EurotestXE can also perform online voltage monitoring, phase sequence testing, Earth spike resistance testing (using the leads included in the standard set), LUX testing (optional A 1172, A 1173) and TRMS current testing (optional A 1018, A 1019 and A 1074). All the results can be quickly saved and referenced on the unit while out on site and can be downloaded via the A 1291 EuroLink PRO software, included in the standard kit, to the computer for evaluation and report generation after testing (A 1292 optional upgrade to EuroLink PRO Plus software which enables automatic printing to NICEIC forms). Performs continuity, insulation, RCD, loop, line, voltage, earth resistance testing and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Earth spike testing: unit performs both 2 and 3 wire earth spike testing. Medical site testing: ISFL First fault leakage current, IMD insulation monitoring device check. Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit. Help screens: unit comes complete with in-built help screens for referencing on site. Automatic loop evaluation: built-in loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations. Tip commander: unit comes complete with a tip-commander to simplify continuity and insulation testing. Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, software changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 100 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Built-in charger & rechargeable batteries: Unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: Automated RCD testing reduces circuit test time. Phase sequence test: requested by BS7671:2008 17th Edition. TRMS Leakage test: Optional current clamp measurement (accessory A 1018 or A 1074). LUX testing: optional light measurement function - accessory A 1172 Type B probe or A 1173 Type C probe. APPLICATION: Initial and periodic testing of domestic and industrial installations. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. Medical installation testing. STANDARDS: Functionality: EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760; CEI 64.8; HD 384; VDE 413 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 16

With DC voltage Range R low 200 mA DC Range CONTINUITY EN 61557-4 Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP High accuracy TRIP LOCK impedance EN 61557-3 Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement RCD Ramp test EN 61557-6 RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement VOLTAGE Simultaneous voltage measurement over 3 phases FREQUENCY Frequency measurement PHASE SEQUENCE L1 - L2 - L3 Three wire resistance EARTH EN 61557-5 Two wire resistance LUX light measurement (A 1172 & A 1173) OTHER TRMS leakage current (A 1018, A 1019 & A 1074) MEASUREMENTS Medical sites (IT RMD test) Frequency span SPECIAL Supports 110 V systems FUNCTIONALITIES TN / TT/ IT earthing system mode ON LINE WARNINGS / Touch electrode INFORMATION HELP menu RS232 COMMUNICATION PORTS USB Number of memory locations SOFTWARE EuroLink PRO MEMORIES EuroLink PRO Plus (A 1292) Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) INSULATION EN 61557-2 100 - 1000 V 0 - 1000 M 0 - 1999 A, AC Optional Optional 45 - 65 Hz // 500 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
KEY FEATURES
EuroLink PRO enables the following acivities: - data downloading, - creation of simple report, - export of measured data to spreadsheet. EuroLink PRO Plus can print onto NICEIC certicates.
ORDERING INFORMATION: Part No. MI 3102 Description EurotestXE

MI 3102 A 1176 A 1003 20901041 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309 A 1289 A 1291 S 2026
Description
EurotestXE Tip commander (2-wire, 1.5 m) with a spiral cable Mains plug Carrying neck strap Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter. UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Soft carrying bag EuroLink PRO with USB cable and RS232 cable Earth spike kit (20 m black, 20 m green, 4.5 m blue, 2 spikes) Short instruction manual, Instruction manual on CD Calibration certicate
. 17
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Specialist Hi-End range MI 3101 EurotestAT
BS7671:2008 (17th Edition) and Part P Downloadable Multifunctional Installation Tester with inspection and Autosequence testing facility.
YE
RRAN
3
L3
ARS
L1 L2
TY
Breaking new ground in fast, efficient installation testing is the MI 3101 EurotestAT. This remarkable instrument reinvents the wheel of installation testers with amazing, never before seen features including All-inone insulation testing, automated ring continuity testing (via the optional A1214 EasiSwitch), Auto-sequence testing, variable sensitivity fuse/wire locating facility (optional A 1191) and built-in battery charging circuitry. It is amazing how so many features can be condensed into such a small, but easy to use unit. All the results can be quickly saved and referenced on the unit while out on site and can be downloaded via the A 1291 EuroLink PRO software, included in the standard kit, to the computer for evaluation and report generation after testing (A 1292 optional upgrade to EuroLink PRO Plus software which enables automatic printing to NICEIC forms). Performs continuity, insulation, RCD, loop, line, voltage, earth resistance testing and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Five times faster: the features of the MI 3101 can signicantly reduce testing time, becoming up to ve times faster than a normal installation tester. Autosequences: build a list of tests, press the test button and let the tester do all the work. All-in-one insulation: perform tests between L-N, L-PE and N-PE simultaneously in under 10 seconds. Automated R1+R2: using the optional EasiSwitch, the unit can signicantly reduce the time taken to perform R1+R2 testing. Schedules of inspection: Built-in schedules of inspection can be completed on the MI 3101 and then downloaded via the included EuroLink PRO software. Structure building: build a structure of the installation either on the software (which can then be sent to your tester) or on the tester so that your results are always saved on the correct circuit. Fuse location: locate circuit fuses/ wires/faults using the optional A 1191 Fuse locator. Earth spike testing: Unit can perform both 2 and 3 wire earth spike testing and specic earth resistance measurement. Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit. Help screens: unit comes complete with in-built help screens for referencing on site. Automatic loop evaluation: built-in loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, software changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 50 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Wide frequency range 15 - 500 Hz. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Phase sequence test: requested by BS7671:2008 17th Edition. APPLICATION: Initial and periodic testing of domestic and industrial installations (testing in aviation, railway networks, agriculture). Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. High volume testing (industrial, aircraft, railway, mining, chemistry, fery boat) STANDARDS: Functionality: EN 61557 Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD):EN 61010-1; EN 61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 18

INSULATION EN 61557-2 CONTINUITY EN 61557-4 LINE/LOOP EN 61557-3 RCD EN 61557-6 VOLTAGE FREQUENCY PHASE SEQUENCE EARTH EN 61557-5 AUTO SEQUENCE TESTS OTHER MEASUREMENTS SPECIAL FUNCTIONALITIES ON LINE WARNINGS COMMUNICATION SOFTWARE MEMORIES GENERAL DATA With DC voltage Range All-in-one insulation test (L-PE, N-PE, L-N) Adjusting test time to capacitance of load Automated R1+R2 testing R low 200 mA DC Range Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) High accuracy TRIP LOCK impedance Built-in loop impedance tables for automatic PASS/ FAIL decision RCD type (general & selective) RCD trip time measurement Ramp test RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement Simultaneous voltage measurement over 3 phases Frequency measurement L1 - L2 - L3 Three wire resistance Two wire resistance Specic earth resistance Autotest of insulation on all conductors L-N-PE AUTOSEQUENCE procedure on switchboard AUTOSEQUENCE procedure on circuit Automatic evaluation of safety, based on all measured values Varistor overvoltage Fuse/fault locator (A 1191) High resolution loop impedance (m) (A 1143) Frequency span Supports 110 V systems TN / TT/ IT earthing system mode Touch electrode HELP menu RS232 USB Number of memory locations EuroLink PRO EuroLink PRO Plus (A 1292) Safety category In-built battery charger Batteries Weight Size (mm) 50 - 1000 V 0 - 1000 M Optional 0 - 1999 A, AC, B Optional Optional Optional 15 - 500 Hz // 2000 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
KEY FEATURES
EuroLink PRO enables the following acivities: - data downloading, - creation of simple report, - export of measured data to spreadsheet. EuroLink PRO Plus is also anabling printing on NICEIC certicates.
ORDERING INFORMATION: Part No. MI 3101 Description EurotestAT

MI 3101 A 1003 20901041 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309 A 1289 A 1291
Description
EurotestAT Mains plug Carrying neck strap Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter. UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Soft carrying bag EuroLink PRO with USB cable and RS232 cable Short instruction manual, Instruction manual on CD Calibration certicate
. 19
17th Edition Installation Testers MULTIFUNCTIONAL TESTERS - Specialist Hi-End range MI 3105 EurotestXA
BS7671:2008 (17th Edition) and Part P Downloadable Multifunctional Installation Tester with inspection, Autosequence testing facility and earth resistance measurement via clamps.
YE
RRAN
3
L3
ARS
L1 L2
TY
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
The flagship model of Metrels installation testers is the MI 3105 EurotestXA. Standing well above the crowd the MI 3105 has all the features a test engineer would need and plenty more to offer. Features including Allin-one insulation testing, automated ring continuity testing, Autosequence testing, variable sensitivity fuse/ wire locating facility (optional A1191) and built-in battery charging circuitry make this an exemplary unit. Additional features include TRMS current measurement, 3wire/single clamp/two clamps earth spike testing (optional 4-wire soil resistivity, A 1199 Adapter) and LUX testing (optional A 1173, A 1172). All the results can be quickly saved and referenced on the unit while out on site and can be downloaded, via the A 1290 EuroLink PRO software included in the standard kit, to the computer for evaluation and professional report generation after testing. Performs continuity, insulation, RCD, loop, line, voltage, earth resistance testing and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES:
Autosequences: build a list of tests, press the test button and let the tester do all the work. This feature combined with the A 1214 EasiSwitch can signicantly reduce testing time, becoming up to ve times faster than a normal installation tester. All-in-one insulation: perform tests between L-N, L-PE and N-PE simultaneously in under 10 seconds. Automated R1+R2: using the optional A1214 EasiSwitch, the unit can signicantly reduce the time taken to perform R1+R2 testing. Schedules of inspection: built-in schedulesofinspectioncanbecompletedonthe MI 3105 and then downloaded via the included EuroLink PRO software. Structure building: build a structure of the installation either on the software (which can then be sent to your tester) or on the tester so that your results are always saved on the correct circuit. Fuse location: locate circuit fuses/ wires/faults using the optional A 1191 Fuse locator. Earth spike testing: Unit can perform both 2 and 3 wire earth spike testing and specic earth resistance measurement. Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit. Help screens: unit comes complete with in-built help screens for referencing on site. Automatic loop evaluation: built-in loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations. Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, software changes can be made to the rmware to keep the unit up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 50 V to 1000 V, reading up to 1000 M. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Multi-system testing: tests on TT, TN, IT and 110 V systems. Wide frequency range 15 - 500 Hz. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Phase sequence test: required by BS7671:2008 17th Edition. TRMS Leakage test: measure and save TRMS load / leakage currents passing around the system. LUX testing: optional light measurement function - accessory A 1172 Type B probe or A 1173 Type C probe.
APPLICATION:
Initial and periodic testing of domestic and industrial installations Testing on high and low frequency installations e.g. testing in aviation, railway networks etc.. Testing of single and multiphase systems. Testing of TT, TN, IT and 110 V systems. High volume testing (industrial, aircraft, railway, mining, chemistry, fery boat)
STANDARDS: Functionality: EN 61557

Other reference standards for testing: BS 7671; IEC/EN 60364; EN 61008; EN 61009; EN 60755; AS/NZ 3760
Electromagnetic compatibility (EMC):
EN 61326 Safety (LVD): EN 61010-1; EN 61010-031
. 20

INSULATION EN 61557-2 CONTINUITY EN 61557-4 LINE/LOOP EN 61557-3 RCD EN 61557-6 VOLTAGE FREQUENCY PHASE SEQUENCE EARTH EN 61557-5 AUTO SEQUENCE TESTS OTHER MEASUREMENTS SPECIAL FUNCTIONALITIES ON LINE WARNINGS COMMUNICATION SOFTWARE MEMORIES GENERAL DATA With DC voltage Range All-in-one insulation test (L-PE, N-PE, L-N) Adjusting test time to capacitance of load Automated R1+R2 testing R low 200 mA DC Range Automatic polarity swap Low current DC Resistance Line impedance measurement Loop impedance measurement (Ze & Zs) High accuracy TRIP LOCK impedance Built-in loop impedance tables for automatic PASS/FAIL decision RCD type (general & selective) RCD trip time measurement Ramp test RCD auto 10, 30, 100, 300, 500, 1000 mA Real-time AC voltage measurement Simultaneous voltage measurement over 3 phases Frequency measurement L1 - L2 - L3 Three wire resistance Two wire resistance One clamp & three wire resistance Two clamps High noise immunity with two clamps Specic earth resistance Autotest of insulation on all conductors L-N-PE AUTOSEQUENCE procedure on switchboard AUTOSEQUENCE procedure on circuit Automatic evaluation of safety, based on all measured values LUX light measurement (A 1172 & A 1173) TRMS leakage current Medical sites (IT RMD test) Varistor overvoltage Fuse/fault locator (A 1191) High resolution loop impedance (m) (A 1143) Frequency span Supports 110 V systems TN / TT/ IT earthing system mode Touch electrode HELP menu RS232 USB Number of memory locations EuroLink PRO EuroLink PRO Plus (A 1292) Safety category In-built battery charger Batteries Weight Size (mm) 50 - 1000 V 0 - 1000 M Optional 0 - 1999 A, AC, B 3 A and more Optional Optional Optional Optional 15 - 500 Hz // 2000 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115
EuroLink PRO enables the following acivities: - data downloading, - creation of simple report, - export of measured data to spreadsheet. EuroLink PRO Plus is also anabling printing on NICEIC certicates.
ORDERING INFORMATION: Part No. MI 3105 Description EurotestXA

MI 3105 A 1003 20901041 A 1296 A 1147 83005447 83005401 20205354 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309 A 1289 A 1291 S 2026 A 1018 A 1019
Description
EurotestXA Mains plug Carrying neck strap Test lead 3 x 1.5 m (brown, green, blue) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Battery holder Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Soft carrying bag EuroLink PRO with USB cable and RS232 cable Earth spike kit (20 m black, 20 m green, 4.5 m blue, 2 spikes) High accuracy current clamp Current clamp Short instruction manual, Instruction manual on CD, Calibration certicate
. 21
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Professional range MI 3121 SMARTEC Insulation / Continuity
BS7671:2008 (17th Edition) and Part P Professional Downloadable Insulation, Continuity and AC Voltage Tester
YE
RRAN
ARS
TY
CAT IV
300 V
The astounding MI 3121 SMARTEC Insulation /Continuity tester takes dead testing to another level. With both an analogue and digital display, the unit can accurately measure up to 2000 on continuity and up to a staggering 30 G on insulation. With configurable limits, the bright red and green indicator lights and on screen tick/cross give a clear pass/fail indication, even in the darkest of conditions. The MI 3121 is rechargeable and has a magnetic back in order to free up hands for testing. The CAT IV protection rating ensures that, as long as the instrument is used correctly, the user is safe in almost any situation. The unit can store up to 1900 results. All the results can be quickly saved and referenced on the unit while out on site and can be downloaded via the optional A 1291 EuroLink PRO software or A 1290 EuroLink PRO Plus software which enables automatic printing onto NICEIC forms. Performs continuity, insulation and AC voltage measurement tests. KEY FEATURES: Downloadable: downloads via RS232 or USB cable directly to the PC via the optional A 1290 and A 1291 software. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 50 V to 1000 V, reading up to 30 G Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. Custom limits: set limits on both Insulation and continuity and large green and red lights will indicate a PASS or FAIL reading. Easy to use: large bright LCD display with large buttons for easy use (even while wearing gloves). APPLICATION: Domestic dead circuit testing. Industrial dead circuit testing. Telecommunication systems testing. Resistance measurements. STANDARDS: Functionality: EN 61557 Electromagnetic compatibility (EMC): EN 61326-1 EN 61326-2-2 Safety (LVD): EN 61010-1 EN61010-031
. 22

200 mA Continuity test Range CONTINUITY Automatic polarity reversal Low current DC measurement Congurable limits Lead compensation facility Test voltages INSULATION Range Congurable limits AC VOLTAGE MEAS- Range UREMENT TRMS measurement FREQUENCY MEASUREMENT Range Analogue and digital display OTHER FEATURES On-screen pass/fail evaluation Built-in battery charger Backlight COMMUNICATION RS232 USB Number of memory locations SOFTWARE MEMORIES EuroLink PRO (A 1291) EuroLink PRO Plus (A 1290) Batteries GENERAL DATA Safety category Weight Size (mm) 0 - 1999 (up to 20 ) 50, 100, 250, 500, 1000 V 0 - 30 G 0 - 550 V 0 - 500 Hz 1900 Optional Optional 6 x AA CAT IV/300 V 0.85 kg 135 x 230 x 75 USB and RS232 communication. Simple and fast manipulation Large LCD screen with backlight and PASS/ FAIL indicators.
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3121 Description Smartec Insulation / Continuity

MI 3121 20901090 A 1055 A 1147 83005447 83005401 A 1016 A 1014 A 1064 A 1013
Description
Smartec Insulation / Continuity Soft hand strap Test lead (2 x 1.5 m Red, Black) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter UK mains cable for charging adapter Test probe (red) Test probe (black) Crocodile clip (red) Crocodile clip (black) Short instruction manual Instruction manual on CD Calibration certicate
. 23
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Professional range MI 3122 SMARTEC Z Line-Loop / RCD
BS7671:2008 (17th Edition) and Part P Downloadable Ze, Zs Line, RCD and Phase Sequence Tester
YE
RRAN
ARS
L3 L1 L2
TY
The MI 3122 SMARTEC Z Line-Loop / RCD is designed specifically for Live circuit testing. This fully featured rechargeable unit can perform Ze and Zs testing, RCD trip time testing, RCD ramp current testing, automated RCD testing, and Line resistance testing (for 3 phase systems). The online voltage monitoring system allows the electrician to monitor what is happening on three simultaneous voltages in real-time while the built-in fault loop impedance tables allows for automated evaluation of loop readings. The bright red and green lights combined with an onscreen pass/fail indication and on-board help screens means that circuit testing can be performed with the greatest of ease while still ensuring the circuit meets the relevant safety regulations. All the results can be quickly saved and referenced on the unit while out on site and can be downloaded via the optional A 1291 EuroLink PRO software or A 1290 EuroLink PRO Plus software which enables automatic printing onto NICEIC forms. Performs RCD, loop, line, AC voltage and phase sequence tests required by the BS7671:2008 (17th Edition) and Part P Building Regulations. KEY FEATURES: Help screens: unit comes complete with built-in help screens for referencing on site. Automatic loop evaluation: builtin loop impedance tables allow automatic evaluation of the loop resistance compared to the regulations. Online voltage monitoring: monitors all 3 voltages in real-time. Phase sequence test: requested by BS7671:2008 17th Edition. Upgradeable: if changes occur to the regulations, software changes can be made to the rmware to keep the unit up to date. TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing reduces circuit test time. Downloadable: downloads via RS232 or USB cable directly to the PC via the optional A 1290 and A 1291 software. APPLICATION: Domestic and Industrial live circuit testing. Single phase and 3-phase testing on TT/TN systems. STANDARDS: Functionality: EN 61557 Electromagnetic compatibility (EMC): EN 61326-1 EN 61326-2-2 Safety (LVD): EN 61010-1 EN61010-031
RCD
auto
CAT IV
300 V
Help SOS
Loop Z
. 24

10, 30, 100, 300, 500, 1000 mA 1/2, 1, 2, 5 A, AC 1900 Optional Optional CAT IV/300 V 6 x AA 0.85 kg 135 x 230 x 75 USB and RS232 communication. Simple and fast manipulation Large LCD screen with backlight and PASS/ FAIL indicators.
KEY FEATURES
Current range Trip time measurement RCD EN 61557-6 RCD ramp test RCD auto test 180 degree function RCD multipliers RCD type (general & selective) Line impedance measurement Loop impedance measurement (Ze & Zs) LINE/LOOP EN 61557-3 High accuracy TRIP LOCK impedance PFC range PSC range Built-in loop impedance tables for automatic PASS/FAIL decision Real-time AC voltage measurement VOLTAGE FREQUENCY PHASE SEQUENCE Simultaneous voltage measurement over 3 phases Frequency measurement L1 - L2 - L3 ON LINE WARNINGS / Touch electrode INFORMATION HELP menu COMMUNICATION SOFTWARE MEMORIES RS232 USB Number of memory locations EuroLink PRO (A 1291) EuroLink PRO Plus (A 1290) Safety category Built-in battery charger GENERAL DATA Batteries Weight Size (mm)
ORDERING INFORMATION: Part No. MI 3122 Description Smartec Z Line-Loop / RCD

MI 3122 20901090 A 1003 A 1296 83005447 83005401 A 1015 A 1298 A 1062 A 1310 A 1297 A 1309
Description
Smartec Z-Loop-Line / RCD tester Soft hand strap Mains plug Test leads 3 x 1.5 m (brown, green, blue) 12 V battery charging adapter UK mains cable for charging adapter Test probe (blue) Test probe (brown) Test probe (green) Crocodile clip (blue) Crocodile clip (brown) Crocodile clip (green) Short instruction manual Instruction manual on CD Calibration certicate
. 25
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Professional range MI 3123 SMARTEC Earth / Clamp
BS7671:2008 (17th Edition) and Part P Professional Downloadable 2, 3 and 4 wire, earth spike resistance tester with optional clamp testing
YE
RRAN
ARS
/
Help SOS
TY
The MI 3123 SMARTEC Earth / Clamp is a remarkable earth spike resistance tester with the ability to perform 2-wire and 3-wire earth spike testing and 4-wire soil resistivity testing. With the optional A 1018 and A 1019 current clamps, the unit can perform one clamp resistance measurement, two clamps (no contact) earth spike testing and TRMS current measurement up to 20 A. Only weighing 0,85 kg, this rechargeable unit has configurable limits which can provide automated PASS/FAIL evaluation of test results. The lightweight design, large bright LCD screen, built-in help screens, optional downloading via RS232 or USB and CAT IV protection rating make the MI 3123 an incredible earth spike resistance test instrument. KEY FEATURES: Earth spike testing: 2-wire and 3-wire earth spike testing and soil resistivity testing. Earth resistance testing via clamps: optional one clamp and two clamps earth spike resistance testing (required optional A 1018 and A 1019 clamps). Downloadable: downloads via RS232 or USB cable directly to the PC via the optional A 1290 and A 1291 software. Help screens: unit comes complete with in-built help screens for referencing on site. Built-in charger & rechargeable batteries: unit has an inbuilt charging circuit and comes complete with a set of rechargeable NiMH batteries. Custom limits: set limits and large green and red lights will indicate a PASS or FAIL reading. Easy to use: large bright LCD display with large buttons for easy use (even while wearing gloves). APPLICATION: Testing on TT and IT systems. Testing sub-station earthing. Lightning system testing. STANDARDS: Functionality: EN 61557 Electromagnetic compatibility (EMC): EN 61326-1; EN 61326-2-2 Safety (LVD): EN 61010-1; EN61010-031
CAT IV
50 V
. 26

3-wire resistance 2-wire resistance EARTH EN 61557-5 One clamp & three wire resistance Two clamps High noise immunity with two clamps Specic earth resistance OTHER MEASUREMENTS ON LINE WARNINGS COMMUNICATION TRMS leakage current (A 1018, A 1019 & A 1074) HELP menu RS232 USB Number of memory locations SOFTWARE MEMORIES EuroLink PRO (A 1291) EuroLink PRO Plus (A 1290) Safety category In-built battery charger GENERAL DATA Batteries Weight Size (mm) Optional Optional 3 A and more Optional 1900 Optional Optional CAT IV/50 V 6 x AA 0.85 kg 135 x 230 x 75 USB and RS232 communication. Large LCD screen with backlight and PASS/ FAIL indicators.
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3123 Description Smartec Earth / Clamp

MI 3123 20901090 20691900 20691012 20691015 20691901 A 1022 A 1147 83005447 83005401
Description
Smaretc Earth / Clamp Soft hand strap Test lead 20 m (green) Test lead 4.5 m (blue) Test lead 4.5 m (red) Test lead 20 m (black) Earth test rod (4 pcs) Rechargeable NiMH AA batteries (6 pcs) 12 V battery charging adapter. UK mains cable for charging adapter Short instruction manual Instruction manual on CD Calibration certicate
. 27
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Basic Testers MI 2126 Earth 2/3
YE
2 and 3 Wire Earth Spike Tester The MI 2126 is a high quality, professional grade test instrument, for performing two- and three-wire earth resistance measurements in accordance with European standard EN 61557-5, on which the estimation of earthing quality is based. The equipment was designed and produced according to many years of experience of producing and dealing with earth resistance and electric installation test equipment. KEY FEATURES: Easy to use: only 3 buttons control all the operations of the test instrument and instruction manual explains the various earth spike testing methods. Portable: light in design and battery operated, the MI 2126 can easily be placed with your other test instruments for moving between test sites. Reliable: reliable results even in the presence of stray currents. Repeatability: outstanding repeatability of test results especially in the case of high test probe resistance of various earthing structures (e.g. asphalt, sand, and stone). APPLICATION: 2 wire and 3 wire earth spike resistance testing. Testing single rod and multiple spiked earthing networks. STANDARDS: Functionality: BS7671 EN 61557-1 - Electrical safety in low voltage distribution systems General requirements EN 61557-5 - Electrical safety in low voltage distribution systems Resistance to earth: DIN/VDE 0100, CEI 64.8, EN/IEC 61010-1 Electromagnetic compatibility (EMC): EN 61326 - Electrical equipment for measurement, control and laboratory use. Safety (LVD): EN 61010-1
RRAN
ARS
FEATURES EARTH RESISTANCE 3-wire resistance 2-wire resistance Display range Test voltage: Short-circuit test current High noise rejection Potential and current probe resistance test: GENERAL DATA Power supply voltage Protection classication: Power consumption: Size (mm) Weight 4 x 1.5 V, C type double insulation 5 VA 280 x 70 x 80 0.4 kg 0 - 19.99 k <40 V, 125 Hz / 150 Hz, sine wave <20 mA
TY
. 28
ORDERING INFORMATION: Part No. MI 2126 Description Earth 2/3

MI 2126 83005246 A 1024 20691893 A 1025 A 1022
Description
Earth 2/3 Carrying strap Test lead 4.5 m (black) Test lead 15 m (red) Test lead 20 m (blue) Earth test rod (2 pcs) Instruction manual Calibration certicate
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Basic Testers MI 3103 GigaOhm 1 kV
YE
Insulation / Continuity Tester
RRAN
ARS
CAT III 300 V
The MI 3103 GigaOhm 1 kV tester is a slim line, easy to use installation tester with the ability to perform accurate resistance measurements quickly and efciently. Features including A.C. voltage testing, built-in fuse protection and CAT III protection ensure that the user is safe and protected while the easy to read display and rotary dial (which can be used even while wearing gloves) make the MI 3103 Gigaohm 1 kV an extremely good value, versatile and straightforward instrument to use. KEY FEATURES: Slim design. Easy to use. 250 V, 500 V and 1000 V insulation testing. Tests up to 2000 M. 200 mA continuity testing. Large LCD display. Low current testing for induction systems. AC voltage measurement. APPLICATION: Domestic installation dead testing. Periodic installation testing. STANDARDS: Functionality: IEC/EN61557-1 IEC/EN 61557-2 IEC/EN 61557-4 IEC/EN 61557-10 BS 7671 Electromagnetic compatibility (EMC): IEC 61326 Class B Safety (LVD): EN/IEC 61010-1 (instrument) EN/IEC 61010-2-31 (accessories)
CONTINUITY 200 mA Range Changes polarity Lead nulling facility Low current DC measurement INSULATION Test voltages Range OTHER FEATURES AC voltage measurement Auto shut off GENERAL DATA Power source Protection Size (mm) Weight 4 x 1.5 V, C type CAT III/300 V 280 x 70 x 80 0.5 kg 250 V, 500 V, 1000 V 0 - 2000 M 0 - 2000 (up to 5 ) yes
TY
ORDERING INFORMATION: Part No. MI 3103 Description GigaOhm 1kV

MI 3103 83005246 83003679 83003678 A 1013
Description
GigaOhm 1 kV Carrying strap Test lead with test probe, 2 m, (black) Test lead with test probe, 2 m, (red) Crocodile clip (black) Instruction manual Calibration certicate
. 29
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Basic Testers A 1143 Euro- Z 290 A
High accuracy Z Loop/Line Tester
YE
RRAN
ARS
TY
CAT IV
310 V
ORDERING INFORMATION: The A 1143 Euro- Z 290 A is a professional portable high current impedance tester. It performs high precision line and high precision fault loop impedance measurements in environments up to CAT IV/310 V. Part No. A 1143 Description Euro- Z 290 A Tester

A 1143 20691959 A 1048 A 1014 A 1016 A 1013 A 1064 A 1017 83005365
KEY FEATURES: Designed to work independantly or in conjunction with the: MI 2086 Eurotest 61557, MI 3101 EurotestAT, MI 3105 EurotestXA and MI 3321 MultiServicerXA. Adapts the instruments to read from 0.1 m up to 19.99 . Works on both single phase and 3-phase systems (110 V to 440 V) Test current up to 350 A. High overvoltage category CAT IV/310 V. IPSC and IPFC readings calculated up to 400 kA. Carry all the accessories in the strong, rugged, durable case of the unit. Built-in LCD for standalone measurement.
APPLICATION: High accuracy loop and line measurements. High accuracy Ze measurements. Power transformer and motor winding measurement. STANDARDS: Safety (LVD): EN 61010-1:2001 Electromagnetic compatibility (EMC): EN 61326:2002 Measurements according to: European standard EN61557: General requirements: Part 1 Loop resistance Part 3
Description
Euro- Z 290 A adapter Test lead, 2-wire, 2 pcs Test lead black, 2 m Test probe black Test probe red, 2 pcs Crocodile clip black, 3 pcs Crocodile clip red, 2 pcs RS232 cable RS232/PS2 cable Instruction manual Calibration certicate
. 30
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Adapters/Calibrations Set A 1199 adapter
Specic earth resistance adapter
YE
RRAN
ARS
ORDERING INFORMATION:
adapter is designed to be used together with instruments EurotestAT

MI 3101 or EurotestXA MI 3105 and the set of extension leads from 3wire Earth sets. The fourth wire is added to adapter standard set.
Part No. A 1199
TY
STANDARD KIT INCLUDES: Part No. Description

adapter Carrying bag 2-earth spikes Extension cable red 15 m Connection cable Instruction manual Calibration certicate
KEY FEATURES: Adapter for performing 4-wire specic earth resistance measurements. Designed for the MI 3101 Eurotest AT and MI 3105 EurotestXA. Comes complete with 4-wire test lead, 15 m red extension cable, 2 earthing spikes and carry case. Manual contains step by step guide on how to perform the test. Recommended use in combination with 3-wire 20 m earth test lead set (S 2026).
APPLICATION: 4-wire ground resistance measurement. Specic earth resistance measurement. STANDARDS: Safety (LVD): EN 61010-1:2001 Electromagnetic compatibility (EMC): EN 61326:2002
A 1199 A 1020 A 1022 20691893 A 1021
Description adapter
. 31
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Adapters/Calibrations Set A 1214 EASI Switch
Automated (R1 + R2) contuinuity adapter
YE
RRAN
ARS
The A 1214 EASI Switch adapter is the rst and only adapter that will allow R1+R2 measurements to be performed automatically (i.e. no need to exchange leads or use connectors). When used in conjunction with the MI 3125B EurotestCOMBO, MI 3101 EurotestAT and MI 3105 EurotestXA, the A 1214 can be quickly connected to all the wires of the ring circuit at the distribution board and directly and remotely controlled by the test instrument in order to perform all the necessary ring continuity tests. This is a very quick and easy method that signicantly reduces the time involved in testing ring circuits. KEY FEATURES: Automated R1+R2 testing of dead circuits (circuits with no voltage connected). Live, neutral and PE resistance all measured at a press of a button. Quick, efcient and easy. Once connected, no need to exchange leads until all continuity tests are complete. When used with the MI 3125B EurotestCOMBO, MI 3101 Eurotest AT and MI 3105 Eurotest XA, the adapter can be used to automatically calculate (R1+R2)/4 for easy results evaluation. APPLICATION: Continuity testing of ring circuits in both domestic and industrial situations STANDARDS: Safety (LVD): EN 61010-1:2001 Electromagnetic compatibility (EMC): EN 61326:2002
ORDERING INFORMATION: Part No. A 1214 Description EASI Switch

A 1214 A 1020 A 1013 A 1310 A 1309
TY
Description
Easi Switch Soft carrying bag Crocodile clip black, 2 pcs Crocodile clip blue, 2 pcs Crocodile clip green, 2 pcs Instruction manual Calibration certicate
. 32
17th Edition Installation Testers SINGLE FUNCTION TESTERS - Adapters/Calibrations Set CS 2090 Europrove
AC/DC Proving Unit
YE
RRAN
ARS
Working on live circuits can be a dangerous activity and the ability to prove a circuit is dead can be a powerful tool when trying to reduce the amount of accidents related to working on electrical systems. The CS 2090 Europrove is an essential tool for ensuring that voltage detectors and digital multimeters not only detect voltage but also read it correctly. The separated AC and DC test terminals allow instruments that use automatic AC / DC selection to be tested on both ranges while the steady 500 V / 50 V voltage ensures that the instrumentation is reading correctly. KEY FEATURES: Portable: compact design makes it easy to be carried around in tool boxes etc. Battery powered: powered from AA type batteries for proving instruments are working correctly in any situation. Lightweight: only 160 g. Separate AC and DC test terminals: individually prove both AC and DC on instruments that automatically select their test range TECHNICAL SPECIFICATION:
OTHER FEATURES AC Voltage generation DC Voltage generation GENERAL DATA Power source Size (mm) Weight 9 VDC (6 x 1.5 V AA type batteries) 68 x 125 x 40 160 g 50 V 10 % 500 V 10 %
Steady 500 V / 50 V generation: Ensure that your voltage detectors not only light up but also read voltage correctly. Low battery indication: LEDs indicate low voltages and low battery levels. APPLICATION: Prove correct voltage readings on high impedance voltages detectors and digital multimeters.
STANDARDS: Safety (LVD): EN / IEC 61010-1 Electromagnetic compatibility (EMC): EN / IEC 61326 ORDERING INFORMATION: Part No. CS 2090 Description Europrove

CS 2090
TY
Europrove
Europrove Instruction manual
. 33
17th Edition Installation Testers HC 30S, HC 60M and HC 90L Hardcase

Heavy duty protection for your Metrel test Instrument
LIFETIME MANUFACTURES WARRANTY
TESTED
Drop
Impact
TESTED
Rainfall
TESTED
IP67
Although we do our best to try to avoid accidents sometimes accidents can happen. Protect your instrument from damage with the new HC range of hard carry case. Light, durable and easy to carry, these cases have gone through rigorous testing including drop tests, impact tests, rain resistance tests, water submersion tests and vibration tests to ensure that they are of the highest quality and provide unparalleled protection for your Metrel test instrument. Padlock holes are moulded into the case as standard to keep your unit secure and safe, while the lifetime manufacturers warranty provides total piece of mind.
KEY FEATURES: Lockable: padlock holes allow the case to be padlocked and secured. Drop tested: drop tested from various heights up to 5.7 meters (19) at various angles and containing various weights to ensure that your instrument stays secure when the case is closed.
Impact tested: dart impact tested to ensure full instrument protection. Strong latches: press & pull handle operation with extra-strength wide design to ensure that the case will not pop open when dropped. Purge Valve: locks the air into the case to ensure youre your instrument is kept in a stable environment.
Rainproof: withstands intensive rainfall, keeping your instrument watertight. Carry Handle: a strong, durable inside core with soft overlay for comfortable transportation between sites. Instruments supported: suitable for Metrel MI 3xxx series Electrical Installation Testers (see accessories page for details).
. 34
17th Edition Installation Testers Accessory selection guide

Instrument Application
Neck strap for carrying MI 3000 series multifunction installation test instruments.
Photo
Product group
Accessory description
Part No.
Bags, cases and straps
Carrying neck strap
2090 1041
Soft Carrying bag for Eurotest multifunctional testers Soft Carrying bag for Smartec single function testers
Soft Carrying bag for A 1289 MI 3000 series multifunction test instruments. Soft Carrying bag for A 1271 MI 3000 series multifunction test instruments. Small hard case (L x W x D) 299 x 248 x 195 mm for HC 30S instruments (IP65, waterproof, shockproof) including foam inlay. Medium hard case (L x W x D) 360 x 290 x 165 for instruHC 60M ments (IP65, waterproof, shockproof) including foam inlay. Large hard case (L x W x D) 410 x 323 x 168 mm for HC 90L instruments (IP65, waterproof, shockproof) including foam inlay. 2020 5354 Battery holder (without batteries) for MI 3000 series multifunctional installation test instruments.
Small hard case
Medium hard case
Large hard case
Batteries and chargers Batteries and chargers Batteries and chargers Batteries and chargers Batteries and chargers Batteries and chargers
Battery Holder
1 x 1.2 V NiMH battery
8300 5106
Single rechargeable AA battery for use with installation test instruments. 12 V DC supply for MI 3000 series installation test instruments (requires 83005401 cable).
12 V battery charging adapter
8300 5447
UK mains cable for charging adapter
8300 5401
Two wire power supply cable for 83005447 charging adapter.
Fast charger
Fast charger for 12 AA / 6 C A 1169 type / 6 D type / 4 x 9 V block type. Fast 6 cells AA battery charger with a set of 6 pcs of NiMH A 1160 batteries including mains plug and car adapter.
6 cells AA battery charger
MI 3125 MI 3000 MI 3100 MI 3002 MI 3125B MI 3102 MI 3101 MI 3105 MI 3121 MI 3122 MI 3123 MI 2126 MI 3103

. 35
Photo
Product group
High accuracy current clamp (0.5 mA - 1000 A)
Part No.
Clamps
High accuracy current clamp for TRMS current testing and A 1018 Earth resistance testing (MI 3105 only). Standard current clamp for A 1019 TRMS current testing and Earth resistance testing. 200 A mini clamp meter for A 1074 current measurement in conned spaces. Set of 4 test leads is intended for two clamp earth resistance S 2009 measurement to connect current clamps on the instrument. Leads for performing earth S 2007 resistance measurement on distance up to 50 m. Extension leads for S 2026 performing 20 m 3-wire earth resistance testing. Extension leads for S 2027 performing 20 m, 3-wire earth resistance testing. For R2 testing of exposed A 1177 metal work or earth resistance testing
Clamps
Current Clamp (20 mA - 1000 A)
Clamps
200 A/0.2 A mini clamp for TRMS current measurement
Earth resist- Test lead set 2 m ance testing (blue,red, green, accessories black) Earth resistEarth test set 50 m ance testing (4 wire) accessories Earth Spike kit 20 m Earth resist(20 m black, ance testing 20 m green, accessories 4.5 m blue) Earth Spike kit 50 m Earth resist(50 m black, ance testing 50 m green, accessories 4.5 m blue) Earth resist20 m earth extension ance testing lead accessories Earth resistance testing Earth test rod (1 pcs) accessories
A 1022
Earth test rod for earth resistance testing.
Locators
Fuse locator
Receiver with variable sensitivity designed to detect the signals A 1191 generated by the installation test instruments in order to locate faults/fuses/wires. Probe for A 1191 enables A 1192 higher accuracy fault/fuse location. Contact probe for A 1191 A 1167 directly locates test signal generated by test instrument. Adapts the A 1191 Fuse A 1068 locator for use cable location via current clamp.
Locators
Fuse locator non-contact probe (for use with A 1191)
Locators
Fuse locator probe (for use with A 1191)
Locators
Clamp adapter cable for A 1191
. 36

Photo
Product group
Part No.
Other
LUX probe (Type B)
LUX probe Type B for light measurement A 1172 (range 0.01 lux - 20,000 lux with 5% accuracy). LUX probe Type C for light measurement A 1173 (range 0.01 lux - 20,000 lux with 10% accuracy). Adapter used for measuring A 1199 soil resistivity/specic earth resistance. Euro Z 290 A is the impedance tester which enables line / A 1143 loop impedance measurements with an accuracy down to 0.1 m . Adapter for performing A 1214 automated ring continuity testing.
Other
LUX probe (Type C)
Other
adapter
Other
Euro Z 290 A
Other
Easi-switch
Other
Breakout box
MPA1
Allows installation tests to be performed without the need to disconnect mains socket from their enclosures.
Other
Eurocheck eld calibrator
Professional multifunctional eld calibrator intended for use CS 2099 with installation test instruments. Alternative to crocodile clip. A 1198 Connect cable to RCD, fuse or other magnetic contact.
Other
Magnetic contact probe
Other
Rod enables insulation resistance and continuity Insulated rod for testA 1201 measurement on hard of ing on LV at a distance access objects, e.g. luminaries. Additional extension part for A 1201 A 1202 Extension part for rod.
Other
Other
Holder for commander
A 1245
Holder can be wrapped around commander connector and stores commander and test tip into the special fork.
Remote testing devices Remote testing device
Tip Commander (2 wire, 1.5 m) with spiral cable Tip Commander (2 wire, 1.5 m) with spiral cable
Two wire tip commander A 1175 with test button and backlight button.
A 1176
Two wire tip commander with test button and save button.

. 37
Photo
Product group
Remote testing device Remote testing device Remote testing device Remote testing device Remote testing device Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications
Tip Commander (3 wire, 1.5 m) with spiral cable Tip Commander (3 wire, 1.5 m) with spiral cable Tip Commander (2 wire, 1,5 m) with spiral cable Tip Commander (2 wire, 1,5 m) with straight cable Tip Commander (3 wire, 1.5 m) with spiral cable for Smartec EuroLink PRO Plus software (with USB & RS232 cables) EuroLink PRO software (with USB & RS232 cables)
Part No.
Three wire tip commander A 1194 with test button and backlight button. Three wire tip commander A 1197 with test button and save button. Two wire tip commander with A 1270 test button and save button. SmarTec design.
A 1244
Two wire tip commander with test button and save button
Three wire tip commander A 1300 with test button and mem button. EuroLink PRO Plus software with additional professional A 1290 reports, complete with USB and RS232 cables. EuroLink PRO software with A 1291 complete with USB and RS232 cables. Password upgrade for standard EuroLink PRO software to A 1292 enable PRO Plus features (i.e. printing on NICEIC).
EuroLink PRO upgrade to PRO Plus
For the initial certication of a new installation, a re-inspecthe introduction of one or MET01 tion, more new circuits to an existing installation. Certicates compliant with BS7671:2008. For consumer units and/or distribuSchedule of Inspection boards with up to 36 ways. tion and circuit details/ MET02 Shall be used in conjunction with test results MET01 or MET04. Certicate pads fully compliant with BS7671:2008. Electrical installation certicate booklet Minor Electrical Installation Works Certicate MET03 Certicate to varify testing after minor works have been performed on an existing electrical installation.
Periodic Inspection Reports
Part P Domestic Electrical Installation Certicate
For reporting on the condition of an existing electrical instal MET04 lation. Certicate pads fully compliant with BS7671:2008 wiring regulations. For certifying an installation in a single dwelling, designed, conMET05 structed and inspected and tested by one person. Certicate pads fully compliant with BS7671:2008.
. 38

Photo
Product group
Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips
Part No.
Mains Plug
For live testing on circuits A 1003 through the standard BS1373 domestic plug socket.
Test leads 3 x 1.5 m (Black, Green, Blue)
A 1011
For performing live and dead testing on an installation.
Test leads 3 x 1.5 m (Brown, Green, Blue)
A 1296
For performing live and dead testing on an installation.
Test leads (Red, Black)
A 1055
Test leads for MI 3121 Insulation/Countinuity tester
Test lead 50 m, black
Extension lead for continuity, A 1164 insulation, earth resistance and other measurements. Extension lead for continuity, A 1153 insulation, earth resistance and other measurements. Extension lead for continuity, A 1154 insulation, earth resistance and other measurements.
4 m green extension lead
A 1012
4 m lead for extending the length of a test lead.
Test lead with test probe, 2 m (Black)
8300 3679
Test lead with integrated test probe.
Test lead with test probe, 2 m (Red)
8300 3678
Test lead with integrated test probe.
Test probe (Blue)
A 1015 Blue Metrel test probe.
Test probe (Brown)
A 1298 Brown Metrel test probe.
Test probe (Green)
A1062
Green Metrel test probe.

. 39
Photo
Product group
Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips Test leads, cables, probes and crocodile clips
Part No.
Test probe (Red)
A 1016 Red Metrel test probe.
Test probe (Black)
A1014
Black Metrel test probe.
Crocodile clip (Blue)
A 1310 Blue Metrel Crocodile clip.
Crocodile clip (Brown)
A 1297 Brown Metrel Crocodile clip.
Crocodile clip (Green)
A 1309 Green Metrel Crocodile clip.
Crocodile clip (Red)
A 1064 Red Metrel Crocodile clip.
Crocodile clip (Black)
A 1013 Black Metrel Crocodile clip.
. 40

Glossary - Power Quality Analysis Selection Guide for Power Quality Analysis MI 2130 Voltscanner MI 2492 PowerQ MI 2392 PowerQ Plus MI 2092 Power Harmonics Analyser MI 2292 Power Quality Analyser Plus MI 2592 PowerQ4 ACCESSORIES
2 2 2 2 2 2 2 2 2
- - - - - - - - -
02 03 04 06 08 10 12 14 16
TECHNICAL CATALOGUE
2010
Power, Energy, Voltage, Power Factor and EN50160 Analysis
Power Quality Analysis
Power Quality Analysis Glossary - Power Quality Analysis

Real Power (P) Real power is the power generated if a voltage is placed over a purely resistive load and current is allowed to ow. This is also called active power and is usually measured in Watts (W) or KiloWatts (kW). Energy The generation or use of useable electric power over a period of time. This is usually expressed in kilowatthours (kWh). Reactive Power (Q) Reactive power is the power that is generated by reactive components (e.g. inductors, capacitors) to create a magnetic eld. This is usually measured in Volt-Amperes reactive (VAr). Apparent Power (S) Apparent power is the perceived power from a load that has both resistive and reactive components. Apparent power is the vector sum of both real and reactive power and is usually measured in Volt-Amperes (VA). Power Factor Is a measure of a power systems efciency and is the ratio of real power (Watts) to apparent power (Volt-Amperes). Fundamental frequency The Fundamental frequency is the lowest and most predominant frequency in a power system (e.g. The fundamental frequency of the mains voltage in the UK is 50 Hz). The fundamental frequency is also called the rst harmonic of the system. Harmonics Harmonics are an integer frequency multiplication of the fundamental frequency (e.g. with a fundamental of 50 Hz, the 2nd harmonic is 50 x 2 = 100 Hz, 3rd harmonic is 50 x 3 = 150 Hz). Harmonics can be in the form of current harmonics or voltage harmonics and can be caused by a variety of modern day equipment including resonating transformers, switch-mode power supplies (SMPS), IT equipment etc. Harmonics can cause a variety of system problems including overheating, false tripping of protective devices, excessive current draw and power uctuations. Interharmonics Interharmonics are harmonics that are not an integer multiplication of the fundamental. The main sources of interharmonic waveform distortion are static frequency converters, induction motors and arcing devices. Total Harmonic distortion This is the ratio of a waves harmonic content (for voltage or current) to its fundamental component. Note: This is expressed as a percentage and is also called the harmonic factor. Transients A transient is a short surge of current or voltage, which often occurring before steady-state conditions have become established. Inrush current As a motor begins, the current needed to start the motor can be 10 to 15 times the normal operating current. This initial surge of current can cause dips in voltage and can be hard to analyse with normal test meters, hence an analyser with a fast logging function is required. Flickers Dened by the IEEE std 59 Flicker is the impression of unsteadiness of visual sensation induced by a light stimulus whose luminance or spectral distribution uctuates with time. It is thus a noticeable and repeated dip or change in voltage of a power system. This has many causes and many results including the surges in motors, problems to people with epilepsy, unpredicted responses of electronic circuits and displays to icker.
YE
ARS
RRAN
EN 50160
TY
EN 50160 Analysis
channel
4-
Number of voltage / current inputs
63rd Harm
Harmonics measurement up to 63rd
FLICKERS
Flickers measurement
WAVEFORM
Waveform monitoring
MODEM
Modem communication
diagrams
PHASE
On-line PHASE diagram on LCD
MOTORS
inrush
Fast logging of inrush currents
ENERGY
counter
Energy measurement
ONLINE
scope
On-line graphical scope
Downloadable
.
Power Quality Analysis Selection Guide for Power Quality Analysis
MI 2130 Part No. VoltScanner
MI 2492 PowerQ
MI 2392 PowerQ
Plus
MI 2092 MI 2292 Power Harmonics Power Quality Analyser Analyser Plus
MI 2592 PowerQ4
INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, VAr) THD and harmonics analysis Power Factor and cos Registration of voltage events (sags, swells, interruptions) Statistical evaluation Current in neutral conductor Phase diagram EN 50160 Analysis Flicker measurement Transients measurement Waveforms measurement Fast logging mode Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life (typically) Weight Size (mm)
3 3
3 3
3 3
3 3
4 4
(rms only)
1-phase, without icker measurement 1-phase, voltage

transients
calculated value calculated value calculated value calculated value (without icker
measurement)
1 - 1800 s 1 - 1800 s Optional
1 - 1260 s Optional
1 - 1800 s
1 - 1800 s Optional
1 - 3600 s
2 - 4 weeks 32 kB 265 V rms 265 V rms 47 - 62 Hz
160 x 160 dots 160 x 160 dots 160 x 116 dots 160 x 116 dots 320 x 200 dots 2 - 5 days 2 - 5 days 2 - 4 weeks 2 - 4 weeks 4 - 8 weeks 1 MB 1 MB 2 MB 2 MB 8 MB 952 V rms 952 V rms 900 V rms 900 V rms 1730 V rms 550 V rms 45 - 66 Hz 550 V rms 45 - 66 Hz 550 V rms 43 - 68 Hz 550 V rms 43 - 68 Hz 1000 V rms
10 - 70 Hz CAT IV/600 V CATIII/300 V CATIII/600 V CATIII/600 V CATIII/600 V CATIII/600 V CATIII/1000 V 4 x AA 6 x AA 6 x AA 4 x C type 4 x C type 6 x AA 180 h 12 h 12 h 5h 5h 15 h 0.5 kg 0.6 kg 0.6 kg 2 kg 2 kg 0.6 kg 103 x 51 x 199 220 x 115 x 90 220 x 115 x 90 265 x 110 x 185 265 x 110 x 185 220 x 115 x 90
. 3
Power Quality Analysis MI 2130 Voltscanner

1-phase voltage recorder for quick EN 50160 power supply assessment
YE
RRAN
ARS
EN 50160
The MI 2130 Voltscanner is a 1-phase voltage recorder for testing supply voltage on a socket in accordance with EN 50160 power quality standard. Recording up to four weeks is possible and up to 3500 events can be stored into the instruments memory. The instrument can be easily set up via the ScanLink software (included with the instrument) and then sent out to customers who can simply plug in the unit for the allocated time period and then send it back for analysis. MS Windows compatible PC Software ScanLink supports downloading and programming of the instrument. Transfer of recorded data to other MS programs (e.g. Excel, Word, etc.) is possible as well. KEY FEATURES: EN 50160 Auto mode. Recording of voltage interruptions, dips, sags and swells. All events are selected by character, time and duration. Voltage transients down to 1s can be captured. Adjustable triggering limits for voltage events. LED indication of recorded events, low battery, memory full and incorrect polarity connection. APPLICATION: Pre-programmed instrument can be simply sent to the customer and connected to the socket for a denite period of time. Supply voltage testing in accordance with EN 50160. Ideal solution for IT managers who want to control input voltage. Voltage monitoring on the customers side for power distribution companies. STANDARDS: Instrument is developed and manufactured in accordance with following standards: Safety (LVD): IEC/EN 61010-1 Electromagnetic compatibility (EMC): IEC/EN 61326-1 Measurements: EN 50160
.
TY
MEMORY

INPUTS Number of voltage measuring inputs MEASUREMENTS RMS Voltage measurement (Min., Max., Avg.) Frequency measurement Registration of voltage events (sags, swells, interruptions) Statistical evaluation EN 50160 Analysis Transients measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life Weight Size (mm)
ORDERING INFORMATION: Part No.

1 1-phase, without icker measurement 1-phase, voltage transients 1 - 1260 s Optional 2 - 4 weeks 32 kB 265 V rms 265 V rms 47 - 62 Hz CATIII/300 V 4 x AA 180 h 0.5 kg 103 x 51 x 199
Description Voltscanner
MI 2130

MI 2130 A 1003 A 1147 20390019 A 1017
Description
Voltscanner Mains measuring cable, 1.5 m Rechargeable NiMH batteries 1.2 V, 4 pcs PC SW ScanLink RS232 cable Instruction manual Calibration certicate
.
Power Quality Analysis MI 2492 PowerQ

Handheld, easy to use, 3-phase analyser for quick diagnosis of power quality
YE
RRAN
ARS
50th Harm
WAVEFORM
diagrams
PHASE
TY
The MI 2492 PowerQ is a lightweight, handheld, 3-phase analyser for quick power quality assessment in low and middle voltage systems. All major power quality parameters like U, I, PF, cos , P, Q and S can be monitored online, measured or recorded. Thanks to various pre-set measuring profiles, different diagnostics can be performed on-site even without using a PC. Built into a rugged case, the MI 2492 PowerQ can be used in harsh industrial conditions and built-in memory modules allow up to five days of recording. Windows compatible PowerView PC Software is delivered in a standard set and supports data downloading and making of test reports. KEY FEATURES: Simultaneous measurement and recording of basic power parameters (U, I, P, Q, S, PF, cos , THD). Pre-set measuring profiles (U-I-f; Power, Harmonics). Voltage and current harmonics up to 50th component. Phase diagram. Voltage unbalance calculation for 3-phase systems. Voltage unbalance in 3-phase systems. On-line scope function. Powerful PC SW PowerView enables downloading, view, analysis of recorded data and professional report creation. APPLICATION: Power quality assessment and troubleshooting in low and middle voltage electric systems. Power correction equipment performance testing and designing. Selection and designing of harmonics lters. Monitoring and managing of consumption prole. STANDARDS: Safety (LVD): IEC/EN 61010-1 Electromagnetic compatibility (EMC): IEC/EN 61326-1 Measurements: EN 50160, EN 61000-4-30, Class B
ENERGY
counter
ONLINE
scope
.

INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, Var) THD and harmonics analysis Power Factor and cos Current in neutral conductor Phase diagram Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life Weight Size (mm) 160 x 160 dots 2 - 5 days 1 MB 952 V rms 550 V rms 45 - 66 Hz CATIII/600 V 6 x AA 12 h 0.6 kg 220 x 115 x 90 calculated value 1 - 1800 s 3 3
ORDERING INFORMATION: Part No. MI 2492 Description PowerQ

MI 2492 A 1033 A 1016 A 1014 A 1013 A 1064 20691962 A 1313 A 1135 A 1147 A 1006
Description
PowerQ Current clamp 1000 A, 3 pcs Test probes red, 3 pcs Test probe black, 1 pcs Crocodile clip black, 1 pcs Crocodile clips red, 3 pcs Voltage measurement cables, 4 pcs PC SW PowerView with RS232 and USB cable Power supply adapter Rechargeable batteries, 6 pcs Soft carrying bag Instruction manual Calibration certicate
ORDERING INFORMATION: Part No. MI 2492F Description PowerQ
STANDARD KIT INCLUDES: Description
KEY FEATURES
Similar content as MI 2492: Current clamp 1000 A, 3 pcs (A 1033) replaced by 1-phase exible current clamps 3000/300/30 A, 3 pcs (A 1227).
Harmonics screen
U, I, F scope
.
Power Quality Analysis MI 2392 PowerQ Plus

Advanced, handheld, easy to use, 3-phase power quality analyser
YE
RRAN
ARS
EN 50160
50th Harm
WAVEFORM
TY
The MI 2392 PowerQ Plus is a genuine, portable, 3-phase power quality analyser which favourably competes with higher priced instruments and can be easily implemented in a variety of different situations. Due to the small dimensions and user friendly interface of the MI 2392 PowerQ Plus it is ideally suited for routine or complex power quality assessment, while a rugged case allows to use it in heavy duty industrial environments. Pre-set logging screens allow on-site evaluation of all major power quality parameters (U, I, P, PF, cos , THD, individual harmonic components, phase shift, etc.). Windows compatible PowerView PC Software (included in the standard set) greatly expands a functionality and versatility of the instrument. KEY FEATURES: Simultaneous measurement and recording of basic power quality parameters (U, I, P, Q, S, PF). Harmonics analysis up to 50th component. Quick set-up functions. Phase diagram. Voltage unbalance calculation for 3-phase systems. On-line scope function. EN 50160 power quality assessment. Recording of anomalies and inrush currents via adjustable triggers. Lightweight design Powerful PC SW PowerView enables downloading, view, analysis of recorded data and professional report creation. APPLICATION: Power quality assessment and troubleshooting in low and middle voltage electrical systems. Balancing phase loads in 3-phase systems. Checking power correction equipment performance. Harmonics spectrum analysis for selection of harmonic lters. Capturing inrush currents e.g. motor s start up currents. Voltage uctuation recording. Consumption recording. STANDARDS: Safety (LVD): IEC/EN 61010-1 Electromagnetic compatibility (EMC): IEC/EN 61326-1 Measurements: EN 50160, EN 61000-4-30, Class B
diagrams
PHASE
ENERGY
counter
ONLINE
scope
.

INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, Var) THD and harmonics analysis Power Factor and cos Registration of voltage events (sags, swells, interruptions) Current in neutral conductor Phase diagram EN 50160 Analysis Fast logging mode Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life Weight Size (mm)

3 3 calculated value (without icker measurement) 1 - 1800 s 160 x 160 dots 2 - 5 days 1 MB 952 V rms 550 V rms 45 - 66 Hz CATIII/600 V 6 x AA 12 h 0.6 kg 220 x 115 x 90
Description PowerQ Plus
MI 2392

MI 2392 A 1033 A 1016 A 1014 A 1013 A 1064 20691962 A 1313 A 1135 A 1147 A 1006
Description
PowerQ Plus Current clamp 1000 A, 3 pcs Test probes red, 3 pcs Test probe black, 1 pcs Crocodile clip black, 1 pcs Crocodile clips red, 3 pcs Voltage measurement cables, 4 pcs PC SW PowerView with RS232 and USB cable Power supply adapter Rechargeable batteries, 6 pcs Soft carrying bag Instruction manual Calibration certicate
ORDERING INFORMATION: Part No. MI 2392F Description PowerQ Plus
KEY FEATURES
Similar content as MI 2492: Current clamp 1000 A, 3 pcs (A 1033) replaced by 1-phase exible current clamps 3000/300/30 A, 3 pcs (A 1227).
U,I logger screen
EN 50160 screen
.
Power Quality Analysis MI 2092 Power Harmonics Analyser

3-phase power quality analyser for complete power quality assessment
YE
RRAN
ARS
63rd Harm
TY
ENERGY
counter
The MI 2092 Power Harmonics Analyser is a versatile, easy to use instrument for long term analysis of 3phase power systems. With the ability monitor a system for up to 4 weeks, the recorder can provide an entire months worth of data which could include voltage and current uctuations, power draw and usage, system loading, harmonic disturbance, power factor uctuations and many more. The on-screen oscilloscope provides a visual description of the shape of the waveform while the energy counter calculates how much energy has been used over the time of recording. Dependant on the connected clamps, the unit can read currents from 1 A up to 3 kA and the PowerLink software (included in the standard set) allows data analysis through either tables or graphs making system analysing, fault nding, problem solving and report writing much easier tasks. KEY FEATURES: Three current and three voltage inputs. Internal memory module allows recording up to 4 weeks. 64 parameters can be monitored or recorded simultaneously. High accuracy measurement and recording of power quality parameters (U, I, f, cos , PF, P, Q, S, current and voltage harmonics up to 63rd order, etc.). 4-quadrant measurements (generator and load with capacitive or inductive character). Energy counter. On-Line scope function. Instrument can be congured either directly or over PC. APPLICATION: General power quality assessment in distribution and industrial low and middle voltage electric systems. Capturing and recording of power supply events (shut-downs, interruptions, sags, dips). Power factor correction equipment measurements. Harmonics measurements and lter selection. Consumption prole recording. STANDARDS: Safety (LVD): IEC/EN 61010-1 Electromagnetic compatibility (EMC): IEC/EN 61326-1 Measurements: EN 50160, EN 61000-4-30, Class B
ONLINE
scope
. 10

INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, Var) THD and harmonics analysis Power Factor and cos Registration of voltage events (sags, swells, interruptions) Statistical evaluation Current in neutral conductor Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life Weight Size (mm) 160 x 116 dots 2 - 4 weeks 2 MB 900 V rms 550 V rms 43 - 68 Hz CATIII/600 V 4 x C type 5h 2 kg 265 x 110 x 185 calculated value 1 - 1800 s 3 3
ORDERING INFORMATION: Part No. MI 2092 Description PHA

MI 2092 A 1033 A 1016 A 1014 A 1013 20691933 A 1036 20390010 83004706 A 1006 A 1020
Description
Power Harmonics Analyser Current clamp 1000 A, 3 pcs Test probes red, 3 pcs Test probe black, 1 pcs Crocodile clips, 4 pcs Voltage measurement cables, 6 pcs (3 red, 3 black) Mains cable PC SW Power Link with RS232 cable Rechargeable batteries, 4 pcs Soft carrying bag Small soft carrying bag for current clamps Instruction manual Calibration certicate
Part No. MI 2092F
Description PHA
KEY FEATURES
Similar content as MI 2092: Current clamp 1000 A, 3 pcs (A 1033) replaced by 3-phase exible current clamps 3000/300/30 A (A 1257).
Meter Display Screen.
Harmonic Analysis.
. 11
Power Quality Analysis MI 2292 Power Quality Analyser Plus

Top of range, 3-phase power quality analyser, with EN 50160 Analysis and Flicker measurement
YE
RRAN
ARS
EN 50160
63rd Harm
TY
The MI 2292 Power Quality Analyser Plus is Metrels top of the range Power system test instrument. With the ability to record up to 4 weeks worth of data, the MI 2292 can also perform a wide variety of tasks making it suitable for both low, mid and high level power system analysis alike. From the Configuration menu, the user can easily choose from a variety of options which include Periodic, Waveform analysis, Fast Logging (useful for in-depth analysis of a machines start-up or shut-down effects on a power network), Transients analysis and EN 50160 recording. With the ability to set up parameters on the instrument, via the software or remotely through the optional modem connection, the MI 2292 is a highly versatile but price competitive instrument suitable for almost any Power Analysis situation. KEY FEATURES: High accuracy measurement and recording of power quality parameters (U, I, f, cos , PF, P, Q, S, current and voltage harmonics up to 63rd order, etc.). Power quality assessment according to EN 50160 including icker measurement and standardized printout report in graph and table form. Transients measurements down to 20 s with adjustable level triggers Waveform measurements with harmonics direction detection. Adjustable level and slope triggers on voltage and current. Instrument or a group of them can be remotely controlled and programmed via GSM modem. Three current and three voltage inputs combined with an internal memory modules. Allows recording up to 4 weeks. 64 parameters can be monitored or recorded simultaneously. Instrument can be programmed either directly or via PC. APPLICATION: General power quality assessment in distribution and industrial low and middle voltage electric systems. Power quality analysis according to EN 50160. Capturing and recording of power supply events (shut-downs, interruptions, sags, dips). Flicker measurement. Power factor correction equipment measurements. Harmonics measurements and lter selection. Transients recording and over-voltage protection devices (MO varistors) performance testing. Assessment of UPS performance. Consumption prole recording. Motors inrush currents monitoring and recording. STANDARDS: Safety (LVD): IEC/EN 61010-1 Electromagnetic compatibility (EMC): IEC/EN 61326-1 Measurements: EN 50160, EN 61000-4-30, Class B
FLICKERS
WAVEFORM
MODEM
MOTORS
ENERGY
counter
ONLINE
scope
. 12

INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, Var) THD and harmonics analysis Power Factor and cos Registration of voltage events (sags, swells, interruptions) Statistical evaluation Current in neutral conductor EN 50160 Analysis Flicker measurement Transients measurement Waveforms measurement Fast logging mode Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life Weight Size (mm)

3 3 calculated value 1 - 1800 s Optional 160 x 116 dots 2 - 4 weeks 2 MB 900 V rms 550 V rms 43 - 68 Hz CATIII/600 V 4 x C type 5h 2 kg 265 x 110 x 185
Description PQA Plus
MI 2292

MI 2292 A 1033 A 1016 A 1014 A 1013 S 2015 20691933 A 1036 20390010 83004706 A 1006 A 1020
Description
Power Quality Analyser Plus Current clamp 1000 A, 3 pcs Test probes red, 3 pcs Test probe black, 1 pcs Crocodile clips, 4 pcs Safety at clamps, 4 pcs Voltage measurement cables, 6 pcs (3 red, 3 black) Mains cable PC SW Power Link with RS232 cable Rechargeable batteries, 4 pcs Soft carrying bag Small soft carrying bag for current clamps Instruction manual Calibration certicate
Part No. MI 2292F
Description PQA Plus
KEY FEATURES
Similar content as MI 2292: Current clamp 1000 A, 3 pcs (A 1033) replaced by 3-phase exible current clamps 3000/300/30 A (A 1257).
Waveform analysis.
Scope Display with display of additional information.
. 13
Power Quality Analysis MI 2592 PowerQ4

Powerful, High-Specication 4-Channel Power Quality Analyzer
YE
RRAN
ARS
EN 50160
TY
channel
4-
The PowerQ4 is compliant with power quality standard IEC 61000-4-30 Class S and standard IEC 61557-12. The powerful PowerView PC Software package comes as standard with the instrument and enables functions including data downloading, data analysis and the printing of professional test reports. The easy to use PowerView software makes the complex analysis of data and data comparison as easy as the click of a couple of buttons and tick boxes. KEY FEATURES: 4 voltage channels with wide measurement range: 0 - 1000 Vrms (CAT III / 1000 V). 4 current channels with support for automatic clamp recognition. Simultaneous measurement and recording of basic power quality parameters (U, I, P, Q, S, PF, cos , THD). Power quality analysis according to EN 50160 including flicker measurement and standardized report printout in graphic and table form. 4-quadrant measurements (generator and load with capacitive or inductive character). 509 parameters can be monitored or recorded simultaneously. 8 MB of internal memory space allows up to 99 days of data recording. PowerQ4 is compliant with power quality standard IEC 61000-4-30 Class S. Power measurements comply with IEC 61557-12 and IEEE 1448. Large LCD display, 320 x 200 dots, with backlight. On-line Scope, Trend and Metering modes. 3000 A/300 A/30 A flexible clamps included in the standard set. Simultaneous 8 channels - 16 bit A/D conversion for accurate power measurements (minimal phase shift error). 15 hours of autonomous (battery) supply. The powerful PowerView PC Software package comes as standard with the instrument and enables functions including data downloading, data analysis and the printing of professional test reports. APPLICATION: Power quality assessment and troubleshooting in low and middle voltage electrical systems. Checking power correction equipment performance. Harmonics spectrum analysis for selection of harmonic lters. UPS, voltage generators and regulators checking and troubleshooting. Voltage, current, power monitoring and recording. Consumption prole recording. STANDARDS: Safety (LVD): EN 61010-1 Electromagnetic compatibility (EMC): EN 61326 Measurements: IEC/EN 610004-30, Class S; IEC/EN 61557-12; IEC/EN 61000-4-7, Class II; IEC/EN 61000-4-15; EN 50160; IEEE 1448
50th Harm
WAVEFORM
diagrams
PHASE
ENERGY
counter
ONLINE
scope
. 14

INPUTS Number of current measuring inputs Number of voltage measuring inputs MEASUREMENTS TRMS Current measurement (Min., Max., Avg.) TRMS Voltage measurement (Min., Max., Avg.) Scope function On-Line harmonics measurement Frequency measurement Power measurement (W, VA, VAr) THD and harmonics analysis Power Factor and cos Registration of voltage events (sags, swells, interruptions) Current in neutral conductor Phase diagram EN 50160 Analysis Flicker measurement Waveforms measurement Fast logging mode Energy measurement Integration period COMMUNICATION PORTS USB COM port RS232 COM port GENERAL DATA Graphical LCD with backlight Maximal recording time Memory module size PC Sofware Maximal test voltage interphase value Maximal test voltage between phase and PE conductors Frequency range Over voltage category AC power supply Built-in battery charger Rechargeable batteries (NiMH) Battery life (typically) Weight Size (mm)

4 4 1 - 3600 s 320 x 200 dots 4 - 8 weeks 8 MB 1730 V rms 1000 V rms 10 - 70 Hz CAT IV / 600 V; CATIII / 1000 V 6 x AA 15 h 0.6 kg 220 x 115 x 90
Description PowerQ4
MI 2592

MI 2592 A 1227 A 1016 A 1014 A 1013 A 1064 A 1309 20691929 20691930 20691932 83005401 A 1313 A 1135 A 1147 A 1006
Description
PowerQ4 1-phase exible current clamps 3000 / 300 / 30 A, 4 pcs Test probes red, 3 pcs Test probe black, 1 pcs Crocodile clip black, 1 pcs Crocodile clip red, 3 pcs Crocodile clip green, 1 pcs Voltage measurement lead, red, 3 pcs Voltage measurement lead, black, 1 pcs Voltage measurement lead, green, 1 pcs UK mains cable for charging adapter PC SW PowerView with RS232 and USB cable Power supply adapter Rechargeable batteries, 6 pcs Soft carrying bag Instruction manual Calibration certicate
KEY FEATURES
Data can be quickly organized and analysed
Generates EN 50160 reports
On-line view
. 15
Power Quality Analysis Accessory selection guide

MI 2130 MI 2492 MI 2392 MI 2092 MI 2292

Photo
Product group
Part No.
Bag is suitable for instrument and accessories.
Soft carrying bag
A 1006
Small soft carrying bag
A 1020 Soft carrying bag for accessories.
Batteries and chargers
Fast charger
A 1169
Fast charger for 12 AA / 6 C type / 6 D type / 4 x 9 V block type.
A 1160
Fast 6 cells AA battery charger with a set of 6 pcs of NiMH battaries.
Other
Current transformer 5 A/1 V
3-phase transformer for power measure-ments on distribution A 1037 panels with 5 A nominal output current. Alternative to crocodil clip. Connect A 1198 cable to RCD, fuse or other magnetic contact. Modem allows communication between the power quality analyser A 1100 and the PC which further supports programming and downloading of the instrument. GSM modem allows wireless communication between the power A 1101 quality analyser and the PC which further supports programming and downloading of the instrument. Fused adapter protect the S 2014 instrument and the user against current strike and over-load. Safety at clamps assure good contact when connecting the test leads on bus-bars and other larger at surfaces. Current clamp with special Metrel connector.
Other
Magnetic contact probe
Other
Modem
Other
GSM Modem
Other
Safety fuse adapters
Other
Safety at clamps
S 2015
Current clamp 1000 A / 1 V
A 1033
Clamps
Mini clamp 100 A/1 V to be used with A1039
Current clamp-on adapter with measuring range 100 A with A 1069 jaw opening 15 mm for power measurements. Requires A 1039 connection cable.
. 16
MI 2592

MI 2130
MI 2492
MI 2392
MI 2092
MI 2292

Photo
Product group
Part No.
Clamps
Mini clamp 5 A/1 V to be used with A 1039
Current clamp-on adapter with measuring range 5 A with jaw A 1122 opening 15 mm for power measurements. Requires A 1039 connection cable.
Clamps
3-phase exible current clamps 3-phase exible current clamps with three selectable measuring A 1179 2000/200/20 A / 1 V ranges. Powered by alkaline or rechargeable batteries. 3-phase exible current clamps 3-phase exible current clamps with three selectable measuring A 1257 3000/300/30 A / 1 V ranges. Powered by alkaline or rechargeable batteries. Single phase exible current 1-phase exible current clamps clamps with three selectable A 1287 3000/300/30 A / 1 V measuring ranges. Powered by alkaline or rechargeable batteries. Single phase exible current 1-phase exible current clamps clamps with three selectable A 1227 3000/300/30 A / 1 V measuring ranges. Powered from instruments 3-pin current terminal. USB / RS232 converter with 1 m xed cable RS232 / USB adapter for PCs without USB COM port.
Clamps
Clamps
Clamps
Software, Books, publications Software, Books, publications
A 1171
RS232 communication cable
A 1017
Connects Metrel instrument to the PC through RS232 COM port.
Test leads, cables, probes Crocodile clip, black and crocodile clips Test leads, cables, probes Crocodile clip, red and crocodile clips Test leads, cables, probes Crocodile clip, green and crocodile clips Test leads, cables, probes Crocodile clip, blue and crocodile clips Test leads, cables, probes Test probe, black and crocodile clips Test leads, cables, probes Test probe, red and crocodile clips
Crocodile clip is useful for stable A 1013 connection of measuring cable to test point. Crocodile clip is useful for stable A 1064 connection of measuring cable to test point. Crocodile clip is useful for stable A 1309 connection of measuring cable to test point. Crocodile clip is useful for stable A 1310 connection of measuring cable to test point.
A 1014 Black Metrel test probe.
A 1016 Red Metrel test probe.
. 17
MI 2592

MI 2130
MI 2492
MI 2392
MI 2092
MI 2292
Photo
Product group
Part No.
Test leads, cables, probes Test probe, green and crocodile clips Test leads, cables, probes Test probe, blue and crocodile clips Test leads, cables, probes Mains measuring cable 1.5 m and crocodile clips Test leads, cables, probes Clamp adapter and crocodile (for A 1069 and A 1122) clips Scanners, printers and labels
A 1062 Green Metrel test probe.
A 1015 Blue Metrel test probe.
For voltage measurements and A 1003 EN 50160 recording with the MI 2130. Connection leads for connecting A 1039 the A 1069 and A 1122 on Metrel power quality analysers.
Printer
A 1279 Printer for MI 2592
Test leads, cables, probes Universal test lead 1.5 m with and crocodile 3 safety test probes clips
3-lead test lead for measurements S 1112 on permanently wired loads or 3-phase sockets.
. 18
MI 2592

Glossary - HV Insulation Diagnostics 3 Selection Guide for HV Insulation Diagnostics 3 MI 3202 GigaOhm 5 kV 3 MI 2077 TeraOhm 5 kV 3 MI 3201 TeraOhm 5 kV Plus 3 MI 3200 TeraOhm 10 kV 3 ACCESSORIES 3
- - - - - - -
02 03 04 06 08 10 12
TECHNICAL CATALOGUE
2010
High Voltage Insulation Resistance testing with PI, DD and DAR measurements
High Voltage Insulation Diagnostics
High Voltage Insulation Diagnostics Glossary - HV Insulation Diagnostics

PI - Polarization Index As a voltage is applied to an insulating material, the particles inside the materials line up and become polarized. The more atoms that become polarizes, the resistance of the material increases. In a insulating material, the quicker the particles polarize, the better the insulating material is. PI is dened in the IEEE Std 43-2000 as the ratio between two insulation resistances readings, during the test, the rst is taken after 1 minute and the second is taken after 10minutes of continuous measurement. DAR - Dielectric absorption ratio The principle behind an insulating material is to keep two conductive materials separated. If an insulating material becomes contaminated (e.g. through dirt, grease etc) leakage current can be absorbed by the insulating material. This leakage current reduces the resistance of the material which results in less power can be delivered to the load. The Dielectric Absorption Ratio (DAR) is dened as the between two insulation resistances measured after 30 seconds and after 60 seconds (1min) of continuous measurement IR - Insulation resistance of insulator, IEV 151-15-43: resistance under specied conditions between two conductive elements, separated by insulating materials. DD - Dielectric discharge test After the power is turned off to a high voltage appliance, the built up charge needs time to dissipate away before the appliance is safe. Typically the insulation material is left connected to the test voltage for 10 - 30 min and then discharged before DD test is carried out. After 1 minute, the capacitance, voltage and discharge current is measured and the DD can be calculated. Step voltage Step voltage test involves insulation re-sistance measurement at different test voltages. Good insulation will show very little deviation between particular read-ings. In case of microcracks, dirt or hu-midity in insulation system the insulation resistance decreases with rising test voltage. When performing a step volt-age test, it is important to start with the lowest test voltage and then move to a higher voltage level. Typical test duration is 60 seconds. Withstanding voltage test This function offers Withstanding Voltage test of insulation material. It covers two types of tests: a) Breakdown voltage testing of high voltage device, e.g. transient suppressors and b) DC withstanding voltage test for insulation coordination purposes. Both functions require breakdown current detection. The test voltage increases step by step from the Start up to the Stop value over a predened time and it is kept at the Stop value for a predened test time Guard terminal The purpose of the GUARD terminal is to lead away potential leakage currents (e.g. surface currents), which are not a result of the measured insulation mate-rial itself but of the surface contamina-tion and moisture. Guard terminal is to be used in conjunction with shielded test leads when measuring insulation re-sistances in G and T range.. R(t) graphs Sometimes a simple value does not show the full picture about the quality of an insulating material, R(t) graphs illustrates how resistance (on the Y or vertical axis) changes in relation to time (on the X or horizontal axis). Resistance Good insulation
Bad insulation
Time Leakage Leakage current is an AC or DC current that ows trough or on the insulations surface.
YE
RRAN
ARS
10 kV
TY
Test voltage 10 kV
5 kV
Test voltage 5 kV
CAT IV 600 V
Safety category
R(t)
R(t) graph insulation resistance
PI / DD/ DAR
Diagnostic test
Downloadable
.
High Voltage Insulation Diagnostics Selection Guide for HV Insulation Diagnostics
Part No.:
MI 3202 GigaOhm 5 kV
MI 2077 TeraOhm 5 kV
MI 3201 TeraOhm 5 kV Plus
MI 3200 TeraOhm 10 kV
INSULATION Test Voltage Range Measuring range Voltage steps Automatic discharge after test Calculation of DD, DAR, PI Withstanding voltage test Voltage ramp test Timer Leakage current measurement Capacitance measurement Short circuit / charge current Guard terminal Auto adjustment function Audible warnings Auto ranging Shielded test leads VOLTAGE Voltage measurement AC/DC ACCURACY Insulation Voltage Capacitance DISPLAY Display type Back light Graph insulation resistance R(t) Bar graph USB / RS232 downloading Number of memory locations Software SAFETY AND PROTECTION Safety category POWER SUPPLY Rechargeable batteries In-built battery charger Low Battery indication Battery life (no load connected) GENERAL DATA Weight Size (mm) 3 kg 310 x 130 x 250 2.1 kg 265 x 110 x 185 3 kg 310 x 130 x 250 5.5 kg 345 x 160 x 335 4 h at 5 kV Optional 4 h at 5 kV 4 h at 5 kV 4 h at 10 kV CATIV/600 V CAT III/600 V CAT IV/600 V CAT IV/600 V Optional / 1000 Optional TeraLink MEMORY, SOFTWARE AND COMMUNICATION / 1000 Optional TeraLink PRO / 1000 Optional TeraLink PRO LCD LCD LCD LCD 5 % + 3 d (to 0.1 T) 10 % + 3 d (to 1 T) 3%+4V 5%+3d 3%+3V 5%+2d 5 % + 3 d (to 1 T) 15 % + 3 d (to 10 T) 3%+4V 5 % + 4 nF 5 % + 3 d (to 1 T) 15 % + 3 d (to 10 T) 3%+4V 5%+2d up to 600 V AC and DC up to 600 V AC and DC up to 600 V AC and DC up to 600 V AC and DC 5 mA 250 V - 5 kV 1 T 250 V, 500 V, 1 kV, 2.5 kV, 5 kV 250 V - 5 kV 5 T 50 V 1.4 mA Optional 250 V - 5 kV 10 T 25 V 5 mA 500 V - 10 kV 10 T 25 V 5 mA
. 3
High Voltage Insulation Diagnostics MI 3202 GigaOhm 5 kV

5 kV Insulation and Voltage tester
YE
RRAN
ARS
The MI 3202 GigaOhm 5 kV provides a quick and accurate reading of insulation resistance. The large segment LCD screen with backlight offers easy reading of results. The analogue/digital display with analogue graph has a range of up to 1 T for insulation resistance and 600 V for voltage measurements. Five test voltages are available. KEY FEATURES: Quick setting: quick & Easy test voltage selection. Faster testing: high 5 mA charging current to quickly charge capacitive loads. Safe: High CAT IV/600 V voltage protection. Easy to read: large, bright LCD display with backlight. Effective testing: high quality instrument, shielded test leads and accessories (included in the standard set). APPLICATION: Testing insulation resistance of rotating machinery and cables. Production line periodic testing and maintenance. Troubleshooting and analysis of all kinds of insulation problems. STANDARDS: Instruments operation: IEC/EN61557-2 Electromagnetic compatibility (EMC): EN 61326 class B Safety (LVD): EN 61010-1 (instrument) EN 61010-031(accessories)
.
TY
5 kV
CAT IV 600 V

INSULATION Test Voltage Range Measuring range Voltage steps Automatic discharge after test Short circuit / charge current Guard terminal Auto adjustment function Audible warnings Auto ranging Shielded test leads VOLTAGE Voltage measurement AC/DC ACCURACY Insulation Voltage DISPLAY Display type Back light Bar graph SAFETY AND PROTECTION Safety category POWER SUPPLY Rechargeable batteries In-built battery charger Low Battery indication Battery life (no load connected) GENERAL DATA Weight Size (mm)
KEY FEATURES
250 V - 5 kV 1 T 250 V, 500 V, 1 kV, 2.5 kV, 5 kV 5 mA up to 600 V AC and DC 5 % + 3 d (to 0.1 T) , 10 % + 3 d (to 1 T) 3%+4V LCD CATIV/600 V 4 h at 5 kV 3 kg 310 x 130 x 250 Handle and shoulder strap make the unit easy to carry
ORDERING INFORMATION: Part No. MI 3202 Description GigaOhm 5 kV

MI 3202 83005401 20691091 20691090 S 2036 83001555 A 1309 A 1046
Description
GigaOhm 5 kV Mains cable 10 kV shielded test lead black, 2 m 10 kV shielded test lead red, 2 m 10 kV crocodile set (black, red) Guard lead green, 2 m Crocodile clip green 6 x 1.2 V NiMH batteries, C type Instruction manual Calibration certicate
.
High Voltage Insulation Diagnostics MI 2077 TeraOhm 5 kV

5 kV Insulation, Voltage and Faultnding Tester
YE
RRAN
ARS
PI / DD/ DAR
The MI 2077 TeraOhm 5 kV is an advanced, eld proven instrument. Its small lightweight design make it easily portable and its bright LCD display ensures that readings can be made in almost any lighting conditions. PI, DD and DAR calculations, insulation measurements up to 5 T, step voltage tests, withstanding voltage tests and capacitance measurement make fault nding easy and the automatic discharge of loads after test make the MI 2077 TeraOhm 5 kV tester an outstanding unit. KEY FEATURES: Automated testing: PI, DD, DAR calculations with automated resistance ranging. All data is displayed during one single measurement. Fault Finding: fully programmable Step-Voltage and Withstanding Voltage test functions to assist in diagnosing faults in insulation. Portable: lightweight 2.1 kg design with carrier bag and neck strap. Memory: stores up to 1000 results with Date and Time stamp. APPLICATION: Rotating Machines. Transformers. Cables. High Voltage Generators. Electrical Circuits. Surge arresters. Insulation systems. STANDARDS: Instruments operation: IEC/EN 61557-2 Electromagnetic compatibility (EMC): EN 61326 Class B Safety (LVD): EN 61010-1 (instruments), EN 61010-031 (accessories)
.
TY
5 kV
CAT IV 600 V

INSULATION Test Voltage Range Measuring range Voltage steps Automatic discharge after test Calculation of DD, DAR, PI Withstanding voltage test Voltage ramp test Timer Leakage current measurement Capacitance measurement Short circuit / charge current Guard terminal Auto adjustment function Audible warnings Auto ranging Shielded test leads VOLTAGE Voltage measurement AC/DC ACCURACY Insulation Voltage Capacitance DISPLAY Display type Back light Bar graph MEMORY, SOFTWARE AND COMMUNICATION USB / RS232 downloading Number of memory locations Software SAFETY AND PROTECTION Safety category POWER SUPPLY Rechargeable batteries In-built battery charger Low Battery indication Battery life (no load connected) GENERAL DATA Weight Size (mm)
KEY FEATURES
250 V - 5 kV 5 T 50 V 1.4 mA Optonal up to 600 V AC and DC 5%+3d 3%+3V 5%+2d LCD Optional / 1000 Optional TeraLink CAT III/600 V Optional 4 h at 5 kV 2.1 kg 265 x 110 x 185
Large custom LCD dot matrix display with bar graph and backlight.
Guard connection terminal to eliminate the inuence of surface insulation currents.
ORDERING INFORMATION: Part No. MI 2077 Description TeraOhm 5 kV

MI 2077 A 1006 83005401 A 1048 A 1047 A 1049 A 1014 A 1016 A 1013
Description
TeraOhm 5 kV Soft carrying bag Mains cable Test lead black, 2 m Test lead red, 2 m Guard lead green with integrated crocodile clip, 2 m Test probe black Test probe red Crocodile clips, 2 pcs (black) Instruction manual, Calibration certicate
.
High Voltage Insulation Diagnostics MI 3201 TeraOhm 5 kV Plus

5 kV Insulation, Voltage and Faultnding Tester
YE
RRAN
ARS
TY
5 kV
CAT IV 600 V
The new MI 3201 TeraOhm 5 kV Plus insulation tester is a portable instrument intended to measure insulation resistance through the use of high DC test voltages up to 5 kV. The large LCD screen allows real-time R(t) graphs to be displayed. Results can be stored and downloaded to a computer via USB and RS232 connections with the help of the optional TeraLink PRO software. The high quality instrument, shielded test leads and quality accessories included in the standard set enable you to perform your testing effectively. KEY FEATURES: Automated testing: PI, DD, DAR calculations with automated resistance ranging. All data is displayed during one single measurement. Fault nding: fully programmable step voltage and withstanding voltage test functions to assist in diagnosing faults in insulation. R(t) graph: real time resistance against time graph plotting facility to graphically illustrate the response of a material to an applied test voltage. Faster testing: high 5 mA charging current quickly charges capacitive loads. Accurate: selectable noise rejection lters (up to 5 mA) and shielded cables as standard ensure accurate readings. Safe: high CAT IV/600 V voltage protection. Portable: lightweight 3 kg design with carry handle and shoulder strap. APPLICATION: Testing insulation resistance of rotating machinery and cables. Production line periodic testing and maintenance. Troubleshooting and analysis of all kinds of insulation problems. Diagnostic testing STANDARDS: Instruments operation: IEC/EN61557-2 Electromagnetic compatibility (EMC): EN 61326 class B Safety (LVD): EN 61010-1 (instrument) EN 61010-031(accessories)
R(t)
PI / DD/ DAR
.

INSULATION Test Voltage Range Measuring range Voltage steps Automatic discharge after test Calculation of DD, DAR, PI Withstanding voltage test Voltage ramp test Timer Leakage current measurement Capacitance measurement Short circuit / charge current Guard terminal Auto adjustment function Audible warnings Auto ranging Shielded test leads VOLTAGE Voltage measurement AC/DC ACCURACY Insulation Voltage Capacitance DISPLAY Display type Back light Graph insulation resistance R(t) Bar graph MEMORY, SOFTWARE AND COMMUNICATION USB / RS232 downloading Number of memory locations Software SAFETY AND PROTECTION Safety category POWER SUPPLY Rechargeable batteries In-built battery charger Low Battery indication Battery life (no load connected) GENERAL DATA Weight Size (mm)
KEY FEATURES
250 V - 5 kV 10 T 25 V 5 mA up to 600 V AC and DC 5 % + 3 d (to 1 T), 15 % + 3 d (to 10 T) 3% + 4 V 5% + 4 nF LCD / 1000 Optional TeraLink PRO CAT IV/600 V 4 h at 5 kV 3 kg 310 x 130 x 250
Real time resistance against time graph plotting facility
Shielded test leads 10 kV included in standard set
ORDERING INFORMATION: Part No. MI 3201 Description TeraOhm 5 kV Plus

MI 3201 83005401 20691091 20691090 S 2036 83001555 A 1309 A 1046
Description
TeraOhm 5 kV Plus Mains cable 10 kV shielded test lead black, 2 m 10 kV shielded test lead red, 2 m 10 kV crocodile set (black, red) Guard lead green, 2 m Crocodile clip green 6 x 1.2 V NiMH batteries, C type Instruction manual, Calibration certicate
.
High Voltage Insulation Diagnostics MI 3200 TeraOhm 10 kV

10 kV Insulation, Voltage and Faultnding tester
YE
RRAN
ARS
TY
10 kV
CAT IV 600 V
The new MI 3200 TeraOhm 10 kV insulation tester is a portable instrument intended to measure insulation resistance through the use of high DC test voltages up to 10 kV. The large LCD screen allows real-time R(t) graphs to be displayed. Results can be stored and downloaded to a computer via USB and RS232 connections with the help of the optional TeraLink PRO software. The high quality instrument, shielded test leads and quality accessories included in the standard set enable you to perform your testing effectively. KEY FEATURES: Automated testing: PI, DD, DAR calculations with automated resistance ranging. All data is displayed during one single measurement. Fault Finding: fully programmable Step-Voltage and Withstanding Voltage test functions to assist in diagnosing faults in insulation. R(t) graph: real time resistance against time graph plotting facility to graphically illustrate the response of a material to an applied test voltage. Faster testing: high 5 mA charging current quickly charges capacitive loads. Accurate: selectable noise rejection lters (up to 5 mA) and shielded cables as standard ensure accurate readings. Safe: high CAT IV/600 V voltage protection Portable: lightweight 5.5 kg design with carry handle. APPLICATION: Testing insulation resistance of rotating machinery and cables. Production line periodic testing and maintenance. Troubleshooting and analysis of all kinds of insulation problems. Effective readings in high noise environments such as high voltage substations and switchyards. Diagnostic testing. STANDARDS: Instruments operation: IEC/EN61557-2 Electromagnetic compatibility (EMC): EN 61326 class B Safety (LVD): EN 61010-1 (instrument) EN 61010-031(accessories)
R(t)
PI / DD/ DAR
. 10

INSULATION Test Voltage Range Measuring range Voltage steps Automatic discharge after test Calculation of DD, DAR, PI Withstanding voltage test Voltage ramp test Timer Leakage current measurement Capacitance measurement Short circuit / charge current Guard terminal Auto adjustment function Audible warnings Auto ranging Shielded test leads VOLTAGE Voltage measurement AC/DC ACCURACY Insulation Voltage Capacitance DISPLAY Display type Back light Graph insulation resistance R(t) Bar graph MEMORY, SOFTWARE AND COMMUNICATION USB / RS232 downloading Number of memory locations Software SAFETY AND PROTECTION Safety category POWER SUPPLY Rechargeable batteries In-built battery charger Low Battery indication Battery life (no load connected) GENERAL DATA Weight Size (mm)
KEY FEATURES
500 V - 10 kV 10 T 25 V 5 mA up to 600 V AC and DC 5 %+ 3 d (to 1 T), 15 %+ 3 d (to 10 T) 3%+4V 5%+2d LCD / 1000 Optional TeraLink PRO CAT IV/600 V 4 h at 10 kV 5.5 kg 345 x 160 x 335
Intuitive keypad and connectivity to PC through RS232 and USB
Dot matrix LCD and connector panel for high quality shielded test leads 12 kV (included in standard set)
ORDERING INFORMATION: Part No. MI 3200 Description TeraOhm 10 kV

MI 3200 83005401 20691067 20691069 20691068 S 2036 83001555 A 1309 83005714
Description
TeraOhm 10 kV Mains cable 10 kV shielded test lead with tip, 2 m 10 kV shielded test lead black, 2 m 10 kV shielded test lead red, 2 m 10 kV crocodile clip, set (black, red) Guard lead green, 2 m Crocodile clip (green) 6 x 1.2 V NiMH batteries, D type Instruction manual on CD, Calibration certicate
. 11
High Voltage Insulation Diagnostics Accessory selection guide

MI 3202 MI 2077 MI 3201

Photo
Product group
Part No.
Soft carry case
Case is suitable for instrument and A 1006 accessory. Side opening for access to connector panel is provided.
Soft Carrying bag with shoulder strap 6 x 1.2 V NiMH batteries, C type 6 x 1.2 V NiMH batteries, D type PC SW TeraLink with RS232 cable
A 1271 Soft Carrying bag for accessories.
A 1046 8300 5714
A set of 6 pieces of rechargeable batteries. A set of 6 pieces of rechargeable batteries.
Software, Books, publications Software, Books, publications Software, Books, publications
TeraLink PC Software supplied with RS232 interface cable supports A 1056 downloading and creation of test reports. TeraLink PRO is downloading and data management software with A 1275 R(t) graph printing possibility. It is delivered with RS232 and USB COM. A 1171 RS232 / USB adapter for PCs without RS232 COM port.
PC SW TeraLink PRO with USB and RS232 cable
USB / RS232 converter with 1 m xed cable
Crocodile clip green Test leads, cables, probes Crocodile clip black and crocodile clips Crocodile clip red Test leads, cables, probes 10 kV crocodile set and crocodile clips Test leads, cables, probes and crocodile clips 10 kV shielded test lead 8 m 10 kV shielded test lead 15 m 5 kV shilded test lead 15 m 5 kV shilded test lead 10 m
A 1309
Crocodile clip for reliable connection of guard test lead.
Crocodile clip for reliable A 1013 connection of test lead to object under test. Crocodile clip for reliable A 1064 connection of test lead to object under test. 10 kV rated crocodile clip assures secure and permanent contact S 2036 during the measurement on bus bars, xing screws, etc. S 2029 Shielded test leads improve accuracy S 2030 of HV insulation resistance measurement in environments with S 2039 high content of external S 2042 electromagnetic interferences. S 2003 Test lead set 5 kV for safe testing in rough eld of work.
Test leads, cables, probes HV test lead set 5 kV and crocodile clips Test leads, Guard lead cables, probes and crocodile Guard lead clips
8300 1555 A 1049
Guard lead green, 2 m Guard lead green with integrated crocodile clip, 2 m
. 12
MI 3200

Glossary - Testing the safety of electrical appliances PAT TESTERS Selection Guide for PAT testers MI 3302 SwiftPAT MI 3311 GammaPAT MI 2142 AlphaPAT MI 3304 BetaPAT Plus MI 3305 OmegaPAT Plus MI 3300 Portable Appliance Simulation Board Glossary - Testing the safety of electrical appliances, machines and switchboards MACHINE AND SWITCHBOARD TESTERS Selection Guide for Machine and Switchboard testers MI 3321 MultiservicerXA MI 2094 CE Multitester ACCESSORIES
4 - 02 4 4 4 4 4 4 4 - - - - - - - 04 06 08 10 12 14 16
4 - 18 4 4 4 4 - - - - 19 20 22 24
TECHNICAL CATALOGUE
2010
In-service inspection and testing of Electrical Equipment
Appliance Safety
Appliances Safety Glossary - Testing the safety of electrical appliances

PAT testing PAT is an abbreviation for Portable Appliance Testing. This refers to the formal inspection and testing of portable appliances to ensure that they are safe to use. continuity test can be performed to simply check an earth path exists (for Class I appliances only). Substitute leakage In this test the Live and Neutral conductors of the appliance are shorted together and a voltage of 40V a.c. is applied between this point and either the earth conductor (class I) or the probe connected to any exposed conductive parts (class I and class II). The test measures how much current passes from the live conductors into the test points.
Class I appliance Equipment in which protection from electric shock is provided by both basic insulation and connection of exposed metal parts to the protective conductor and onto the earthing of the plug.
Insulation test A high DC voltage test to ensure that the resistance between the phases (i.e. live and neutral) and earth is sufciently highenough to guarantee that equipment is safe to use.
Class II appliance Equipment in which protection against electric shock is provided by basic insulation and an additional safety precaution (e.g. supplementary insulation) or via reinforced insulation. Class II appliances usually have the following symbol on them:
Visual check This is a visual test of the equipment to conrm that there are no visible signs of damage or defects. This can be recorded on most of Metrels PAT testers for future reference. Earth Bond/Continuity test Test to ensure that the earth cable has the ability to withstand a fault current should a problem occur in the appliance. IT equipment can have problems with high current Earth Bond tests, in which case a soft curent test (20 mA - 200 mA)
Leakage test The amount of current that nds an alternative path back to the supply, other than through the neutral conductor. High leakage currents can cause both operation problems (e.g. tripping RCDs) and health and safety issues (e.g. cause voltages to appear on pipe-work which can cause injury). This test powers up the equipment with 230 V a.c. and measures the amount of leakage current the equipment produces.
v
A
v
A
Touch leakage test This test measures the amount of current that would pass through the human body if a person was to touch the appliance while it was in operation. The PAT tester powers up the appliance and via a probe which the user connects to the appliance, simulates the average resistance of the Human body and measures how much current would pass through a person if he touched the appliance. Polarity test A polarity test checks that all the connections in an IEC cable or extension cable are correctly tted. Results include L-open, N-open, PE-open, L-PE shorted, L-N shorted, N-PE shorted, L-N crossed, L-PE crossed, N-PE crossed and multiple faults. Flash test Also referred to as Hi-Pot or Dielectric strength test. The test is a high a.c. voltage test which checks the dielectric strength of the insulation in a piece of equipment. This can
Differential Leakage If an appliance has more than one connection to ground (e.g. the metal housing of the appliance sits on the ground or is screwed down). A measure of the current passing through the cable may not be a true indication of the full leakage current supplied by the appliance. Differential leakage measures the difference in current between the live and neutral cable which provides a true value of how much current a appliance leaks to ground.
.
Appliances Safety
be 1500 V for class I equipment and 3000 V for class II equipment and tends to be used in accordance with CE tests once an appliance has been repaired.
RCD test This test checks how long it takes for a portable RCD to trip in the case that a fault occurs.
Project Uploading When retesting a site or location, project uploading allows previously saved information to be reloaded onto the PAT tester to speed up testing and enable trend comparison.
Autosequencing Autosequencing is a series of tests that are initiated with the press of a button and are automatically executed in a particular order by the test instrument.
Custom tests Custom tests allow the user of the test instrument to dene the tests and times involved in the autosequence. This is extremely useful for unusual appliances or appliances that require a special method of testing that is not included in the standard autosequences.
Trend Comparison Trend comparison allows test information from different dates to be compared in order to discover if deterioration is occurring in an appliance. Should deterioration be found, the test engineer can make an informed decision as to if the frequency of testing and inspection is sufcient for the appliance.
. 3
Appliances Safety Selection Guide for PAT testers

ADVANCED CONFIGURABLE / DOWNLOADABLE PAT
MI 3311 GammaPAT
BASIC PASS / FAIL PAT

Part No. MI 3302 SwiftPAT
MEASUREMENT Earth bond resistance (100 mA) Earth bond resistance (200 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance (250 V) Insulation resistance (500 V) Differential leakage current Touch leakage current Substitute leakage current Leakage current measurements with optional clamp Flash test RCD test IEC Lead test (polarity test) Load test / Functional test Voltage TRMS ADDITIONAL FEATURES PASS/FAIL Indicators Mains supply check 230 V appliance testing 110 V appliance testing (*not included in standard set) Graphical LCD Graphical On-Line help Back light Real time clock QWERTY keyboard Built-in Checkbox Auto testing (manually select class and type of appliance) Barcode shortcut auto testing Communication ports USB / RS232 Test n Tag (Barcode scanner + thermal label printer) Downloadable Project upload from PC to instrument Trend (compare) on instruments LCD Trend (compare) with PC SW PAT Link PRO Plus (optional) Memory Size STANDARD / OPTIONAL ACCESSORIES Scanner Thermal label printer Receipt printer PC SW PATLink PRO (download report, data export) PC SW PATLink PRO Plus (download PRO Plus report, data export, trend) GENERAL DATA Weight Size (mm)
LITE
PRO
-/ Adapter Adapter * / Optional -/ Adapter * /
1500 Optional
1500 Optional
Optional Optional 2.8 kg 265 x 110 x 185
Optional
0.9 kg 230 x 140 x 80
.
Appliances Safety
ADVANCED CONFIGURABLE / DOWNLOADABLE PAT

MI 2142 AlphaPAT
ADVANCED CONFIGURABLE / DOWNLOADABLE /UPLOADABLE /FLASH PAT

MI 3304 BetaPAT Plus MI 3305 OmegaPAT Plus
YE
RRAN
ARS
TY
Autosequence
Downloadable
/ / Help SOS
Help menu
Uplodable
/ -
110 V 230 V
Powers from 230 V & 110 V supplies
Adapter
/ 6500 Optional Optional Optional Optional 8.4 kg 345 x 160 x 335
/ 6500 Optional Optional Optional Optional 8.4 kg 345 x 160 x 335
HV
Flash testing
Optional/
RCD
RCD testing
Trend analysis
1100 Optional Optional Optional 3.5 kg 265 x 110 x 185
N L PE
Fixed appliance testing
Multi User
.
Appliances Safety PAT TESTERS - Basic Pass/Fail MI 3302 SwiftPAT

PASS / FAIL Portable Appliance Tester
YE
RRAN
ARS
Portable, easy to use and straightforward! These phrases describe the MI 3302 SwiftPAT. To operate the unit, simply choose the class of the appliance (class I or class II), choose the type of appliance (Portable/ Handheld, IT, IEC Cable or Other) and press START. Its that simple! The PAT tester will perform all the appropriate tests and then display all the results on the screen including individual and overall PASS/FAIL markings for recording. The large, easy to read backlight display makes the unit ideal for working in almost all lighting situations while the ability to perform either hard or soft earth bond and insulation tests and also the ability to perform substitute leakage tests (all automatically selected by the machine) makes this unit perfect for anyone requiring a quick and simple evaluation of the safety of their appliances. KEY FEATURES: Autosequencing: built in Autosequences speed up testing and ensure no tests are missed. Automated: automatic testing and Pass/Fail evaluation of results according to the code of practice. Efficient: all results shown at once for easy recording. Adaptable: tests both 230 V appliances and 110 V appliances (via socket adapter included in standard set). Bright: large, bright, backlight LCD display for working in dark locations. Intelligent: hard or soft tests are chosen automatically to reduce the risk of damage occurring on the selected appliance. APPLICATION: Checking the safety of an appliance before use. Entry level Portable Appliance testing. STANDARDS: Measurements: EN 60950, VDE 701, VDE 702, BS 89 Electromagnetic compatibility (EMC): IEC 61326 Safety (LVD): EN 61010
.
TY
Appliances Safety
MEASUREMENT Earth bond resistance (100 mA) Earth bond resistance (25 A) Insulation resistance (250 V) Insulation resistance (500 V) Substitute leakage current IEC Lead test (polarity test) Load test ADDITIONAL FEATURES PASS/FAIL Indicators 230 V appliance testing 110 V appliance testing Graphical LCD Back light Auto testing (manualy select class and type of appliance) GENERAL DATA Weight Size (mm) 2.8 kg 265 x 110 x 185 Connection terminal. Adapter Large custom LCD dot matrix display with backlight. Simultaneous presentation of measuring results and test parameters. User friendly keyboard enables simple and fast adjustment.
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3302 Description SwiftPAT

MI 3302 A 1006 A 1126 A 1136
Description
SwiftPAT Soft Carry case Earth Bond Cable 110 V adapter Instruction manual Calibration certicate
.
Appliances Safety PAT TESTERS - Advanced Congurable/Downloadable MI 3311 GammaPAT

Downloadable Battery Powered Portable Appliance Tester
YE
RRAN
ARS
TY
Fly through your PAT testing with the battery powered MI 3311 GammaPAT. This small, light weight instrument is ideal for getting into small, awkward places (e.g. under tables, behind cabinets etc). To reduce the time involved in testing, the MI 3311 GammaPAT automatically performs Earth Continuity, Insulation, SubLeakage test and Polarity tests according to the appliance type (selected by the user manually or via a barcode scanner). The large, backlit LCD screen displays all the results after testing and can be downloaded via the optional PC software. The bright red and green pass/fail indicators on the side of the display ensure that you will never be left in the dark as to whether your portable appliance meets the appropriate appliance safety regulations and code of practice. KEY FEATURES: LED Pass/Fail indicators: two LED indicators for PASS / FAIL evaluation of test results are placed on both sides of the LCD. Battery powered: battery power makes the instrument more portable for moving around test sites. Internal battery charger: batteries can be charged by connecting a 12 V via adapter. Easy to use: 2 levels of autosequence (basic and advanced) and separate simple mode make the unit suitable for all users. Backlight: large bright LCD with backlight for easy reading of results even in dark conditions. Help screens: unit comes complete with built-in help screens for referencing on site. Upgradeable: if changes occur to the regulations, upgrades can be made to the rmware to keep the instrument up to date. Barcode scanning function: optional barcode scanning system can help increase speed of testing with medium and advanced autosequencing, reads appliance IDs. Downloadable (GammaPAT PRO): with memory capacity of 1500 locations, the unit is downloadable. PC SW PAT Link PRO is included in the the standard set, enables downloading of test results, parameters and creation of test reports. The integrated Checkbox: has been developed to provide the checking of the calibration of MI 3311 GammaPAT as required by the Code of Practice. Autosequence: Instrument automatically selects and runs the appropriate tests, limits and testing order appropriate to the selected appliance. APPLICATION: Professional portable appliance testing. General portable appliance testing. Multi-location portable appliance testing. STANDARDS: Measurements: EN 61557, VDE 0404-1, VDE 0404-2, VDE 0701, VDE 0702, NEN 3140 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1, EN 61010-031
Help SOS
110 V 230 V
.
Appliances Safety
MEASUREMENT Earth bond resistance (200 mA) Insulation resistance (250 V) Insulation resistance (500 V) Substitute leakage current Voltage TRMS Load test / Functional test ADDITIONAL FEATURES PASS/FAIL Indicators Mains supply check 230 V appliance testing 110 V appliance testing (*not included in standard set) Graphical LCD Graphical On-Line help Back light Real time clock Built-in Checkbox Auto testing (manualy select class and type of appliance) Barcode shortcut auto testing Communication ports USB / RS232 Downloadable Memory Size STANDARD / OPTIONAL ACCESSORIES Scanner PC SW PATLink PRO (download, report, data export) PC SW PATLink PRO Plus (download, PRO Plus report, data export, trend) GENERAL DATA Weight Size (mm) 0.9 kg 230 x 140 x 80 Optional Optional Optional Optional Optional Adapter * / Optional 1500 Adapter * / 1500 LITE -/ PRO -/
ORDERING INFORMATION: Part No. MI 3311 Description GammaPAT LITE

MI 3311 A 1064 A 1016 20691124 83005447 83005401 A 1147
Description
GammaPAT LITE IEC cable, 2 m Crocodile clip (red) Test probe (red) Test lead (red 1.5 m) 12 V battery charging adapter UK mains cable for charging adapter Rechargeable NiMH AA batteries (6 pcs) Instruction manual Calibration certicate
ORDERING INFORMATION: Part No. MI 3311 Description GammaPAT PRO
STANDARD KIT INCLUDES: KEY FEATURES Description

Similar content as MI 3311 LITE: Plus A 1305 PC SW PAT Link PRO with USB and RS232-PS/2 cable
Fast and easy access to test procedure: select the auto test and press START.
.
Appliances Safety PAT TESTERS - Advanced Congurable/Downloadable MI 2142 AlphaPAT

Downloadable Portable Appliance Tester
YE
RRAN
ARS
Help SOS
TY
The small, lightweight design of the MI 2142 AlphaPAT really does disguise the multitude of talents contained in such a unique unit. From new, the unit comes with over 110 pre-programmed automated sequences for use on Portable/Handheld equipment, heating and cooking equipment, IT equipment, moveable equipment and IEC power cables. For specially built equipment that does not fall into these categories, up to 50 custom automated sequences can be programmed into the unit to speed up testing while still ensuring the appliances safety. The simple menu system, bright LCD screen, optional barcoding system, automated PASS/FAIL results evaluation and built-in help screens make this unit extremely easy to use while the ability to store up to 1100 results and download them onto a PC for storage or report creation makes the MI 2142 truly stand out in a crowd.
110 V 230 V
KEY FEATURES: Autosequencing: built in Autosequences speed up testing and ensure no tests are missed. Automated: automatic testing and Pass/Fail evaluation of results according to the code of practice. Adaptable: tests both 230 V appliances and 110 V appliances (via socket adapter included in standard set). Multi-tasking: can perform Hard and Soft Earth Bond test, 250 V / 500 V insulation tests, differential / substitute / touch leakage test, Load tests, fuse tests and polarity tests.
Intelligent: hard or soft tests are chosen automatically to reduce the risk of damage occurring on the selected appliance. Downloadable: with memory capacity of 1100 locations, the unit can be downloaded to a computer via the PAT Link software (included in the standard set). APPLICATION: Domestic PAT testing. Hotel PAT testing. General PAT testing. Factory/warehouse PAT testing.
STANDARDS: Measurements: VDE 0701, VDE 0702, BS 89, IEC 60335-1, IEC 60598-1, IEC 60745, IEC 60950 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1
. 10
Appliances Safety
MEASUREMENT Earth bond resistance (100 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance (250 V) Insulation resistance (500 V) Differential leakage current Touch leakage current Substitute leakage current IEC Lead test (polarity test) Load test / Functional test ADDITIONAL FEATURES PASS/FAIL Indicators Mains supply check 230 V appliance testing 110 V appliance testing Graphical LCD Graphical On-Line help Back light Real time clock Auto testing (manualy select class and type of appliance) Barcode shortcut auto testing Communication ports USB / RS232 Downloadable Memory Size GENERAL DATA Weight Size (mm) 3.5 kg 265 x 110 x 185 Small and lightweight design makes AlphaPAT ideal for PAT testing on variety of environments. Adapter Optional/ 1100 Multi - input / output ports: Barcode reader, RFID reader / writer, Printer, PC. / Clear and easy access to test procedure: select the auto test, press START.
KEY FEATURES
ORDERING INFORMATION: Part No. MI 2142 Description AlphaPAT

MI 2142 A 1006 A 1126 A 1136 A 1117
Description
AlphaPAT Soft carry case Earth bond cable 110 V adapter PC SW PAT Link with RS232 cable Instruction manual Calibration certicate
. 11
Appliances Safety PAT TESTERS - Advanced Congurable/Downloadable/uploadable/Flash MI 3304 BetaPAT Plus

Uploadable/Downloadable Portable Appliance Tester
YE
RRAN
ARS
TY
The prime goal of a PAT testing engineer is to perform a job as quickly and efficiently as possible while ensuring that every appliance has been tested correctly. The innovative MI 3304 PAT testers is built with this in mind. This portable, self-contained and durable unit can be moved between sites with minimum time and effort. The large, bright LCD screen enables the unit to work in almost all lighting conditions while new features including portable RCD testing, clamp leakage current measurement, project uploading, appliance recall and retest functions, fixed appliance test ports, optional PASS/FAIL label printing and on-site test result comparison make this instrument perfect for PAT testing in almost any situation. KEY FEATURES: Autosequencing: 110 Built in Autosequences speed up testing and ensure no tests are missed. Automated: automatic testing and Pass/Fail evaluation of results according to the code of practice. RCD testing: test trip times of Portable RCDs in accordance with the code of practice. Project uploading: upload previous test data for fast retesting of locations (requires PAT Link PRO Plus software). Scan and test: optional barcoding system and PASS/FAIL barcode label printing make retesting quick and simple. Adaptable: tests both 230 V appliances and 110 V appliances. User friendly: Large LCD screen, full QWERTY keyboard, help screens and warnings guide the user through
correctly testing an appliance. Multi-tasking: can perform hard and soft earth bond test, 250 V and 500 V insulation tests, differential /substitute / touch leakage test, Load tests, fuse tests and polarity tests. Multiple users and locations: the name of the user, the building in which the instrument was tested and the room information can be typed in and stored alongside the test results and appliance information. Intelligent: hard or soft tests are chosen automatically to reduce the risk of damage occurring on the selected appliance. Downloadable: with memory capacity of 6500 locations, the unit can be downloaded to a computer via the PATLink PRO software (included in the standard set). Clamp leakage current measure-
ment: saves time by enabling quick measurement of leakage current with current clamps directly on power supply cable. No need to connect the test appliance to the tester. APPLICATION: Professional PAT testing. General PAT testing. Factory/warehouse PAT testing. Multi-location PAT testing. After repair safety testing. STANDARDS: Measurements: IEC 60335-1, IEC 60598-1, IEC 60745, IEC 60745, VDE404-1, VDE404-2, VDE 0701, VDE 0702 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1, EN 61010-031
Help SOS
110 V 230 V
N L PE
RCD
. 12
Appliances Safety
MEASUREMENT Earth bond resistance (200 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance (250 V) Insulation resistance (500 V) Differential leakage current Touch leakage current Substitute leakage current Leakage current measurements with optional clamp RCD test IEC Lead test (polarity test) Load test / Functional test ADDITIONAL FEATURES PASS/FAIL Indicators Mains supply check 230 V appliance testing 110 V appliance testing Graphical LCD Graphical On-Line help Back light Real time clock QWERTY keyboard Auto testing (manualy select class and type of appliance) Barcode shortcut auto testing Communication ports USB / RS232 Test n Tag (Barcode scaner + thermal lable printer) Downloadable Project upload from PC to instrument Trend (compare) on instruments LCD Trend (compare) with PC SW PAT Link PRO Plus Memory Size GENERAL DATA Weight Size (mm)
KEY FEATURES
/ / 6500 8.4 kg 345 x 160 x 335
Multi - input / output ports: Barcode reader Printer PC
ORDERING INFORMATION: Part No. MI 3304 Description BetaPAT Plus

MI 3304 A 1126 20691095 A 1017 83004993 A 1309 A 1013 A 1062 A 1014 20691928 20691926
Description
BetaPAT Plus Earth Bond Cable PRCD cable PC SW PatLink PRO RS232 downloading cable USB downloading cable Crocodile clip (green) Crocodile clip (black) Test probe (green) Test probe (black) Test lead (green 1.5 m) Test lead (black 1.5 m) Instruction manual Calibration certicate
. 13
Appliances Safety PAT TESTERS - Advanced Congurable/Downloadable/uploadable/Flash MI 3305 OmegaPAT Plus

Uploadable/Downloadable Portable Appliance Tester with Flash Test
YE
RRAN
ARS
TY
The prime goal of a PAT testing engineer is to perform a job as quickly and efficiently as possible while ensuring that every appliance has been tested correctly. The innovative MI 3305 PAT testers is built with this in mind. This portable, self-contained and durable unit can be moved between sites with minimum time and effort. The large, bright LCD screen enables the unit to work in almost all lighting conditions while new features including portable RCD testing, clamp leakage current measurement, flash test, project uploading, appliance recall and retest functions, fixed appliance test ports, optional PASS/FAIL label printing and on-site test result comparison make this instrument perfect for PAT testing in almost any situation. KEY FEATURES: Autosequencing: 110 Built in Autosequences speed up testing and ensure no tests are missed. Automated: automatic testing and Pass/Fail evaluation of results according to the code of practice. RCD testing: test trip times of Portable RCDs in accordance with the code of practice. Project uploading: upload previous test data for fast retesting of locations (requires PRO Plus software). Scan and test: optional barcoding system and PASS/FAIL barcode label printing make retesting quick and simple. Flash Test: dielectic strength test after repair safety testing. Adaptable: tests both 230 V appliances and 110 V appliances. User friendly: large LCD screen, full QWERTY keyboard, help screens
and warnings guide the user through correctly testing an appliance. Multi-tasking: can perform hard and soft earth bond test, 250 V / 500 V insulation tests, differential /substitute / touch leakage test, Load tests, fuse tests and polarity tests. Multiple users and locations: the name of the user, the building in which the instrument was tested and the room information can be typed in and stored alongside the test results and appliance information. Intelligent: hard or soft tests are chosen automatically to reduce the risk of damage occurring on the selected appliance. Downloadable: with memory capacity of 1100 locations, the unit can be downloaded to a computer via the PATLink software (included in the standard set). Clamp leakage current measure-
ment: saves time by enabling quick measurement of leakage current with current clamps directly on power supply cable. No need to connect the test appliance to the tester. APPLICATION: Professional PAT testing. General PAT testing. Factory/warehouse PAT testing. Multi-location PAT testing. After repair safety testing. STANDARDS: Measurements: IEC 60335-1, IEC 60598-1, IEC 60745, IEC 60745, VDE404-1, VDE404-2, VDE 0701, VDE 0702 Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1, EN 61010-031
Help SOS
110 V 230 V
N L PE
RCD
HV
. 14
Appliances Safety
MEASUREMENT Earth bond resistance (200 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance (250 V) Insulation resistance (500 V) Differential leakage current Touch leakage current Substitute leakage current Leakage current measurements with optional clamp Flash test RCD test IEC Lead test (polarity test) Load test / Functional test ADDITIONAL FEATURES PASS/FAIL Indicators Mains supply check 230 V appliance testing 110 V appliance testing Graphical LCD Graphical On-Line help Back light Real time clock QWERTY keyboard Auto testing (manualy select class and type of appliance) Barcode shortcut auto testing Communication ports USB / RS232 Test n Tag (Barcode scaner + thermal lable printer) Downloadable Project upload from PC to instrument Trend (compare) on instruments LCD Trend (compare) with PC SW PAT Link PRO Plus Memory Size GENERAL DATA Weight Size (mm)
KEY FEATURES
/ / 6500 8.4 kg 345 x 160 x 335
Fast and easy access to test procedure: select the auto test and press START
Multi - input / output ports: Barcode reader Printer PC
ORDERING INFORMATION: Part No. MI 3305 Description OmegaPAT Plus

MI 3305 A 1126 20691095 83004105 A1017 83004993 A 1309 A 1013 A 1062 A 1014 20691928 20691926
Description
OmegaPAT Plus Earth Bond Cable PRCD cable Flash cable PC SW PatLink PRO RS232 downloading cable USB downloading cable Crocodile clip (green) Crocodile clip (black) Test probe (green) Test probe (black) Test lead (green 1.5 m) Test lead (black 1.5 m) Instruction manual Calibration certicate
. 15
Appliances Safety MI 3300 Portable Appliance Simulation Board

Multipurpose Portable Appliance Simulation Board
YE
RRAN
ARS
The MI 3300 portable appliance simulation board is a great piece of equipment for teaching or demonstrating PAT testing. The MI 3300 simulates a wide variety of portable equipment in normal operation or in a variety of fault conditions with the simple flick of a switch. The strong, rugged, portable case with detachable lid allows the unit to be moved between sites or stored quickly and effortlessly after the session is complete. The in-built adaptability of the unit to simulate countless products along with the ability to safely replicate set fault conditions make this the ideal unit for teaching or assessing learning in classrooms, training sessions, demonstration sessions, seminars and on PAT training courses. KEY FEATURES: Unlimited: a practically unlimited number of different pieces of equipment (portable, handheld, machine or switchgear) can be simulated by using different tabels (eight included in standard set). Upgradeable: on demand, the demonstration board can be simply upgraded with new tabels. Reliable: normal and fault situations can be switched on and off, offering reproducible fault conditions for the assessment of learning. Adaptable: simulates the following faults: Earth bond faults, insulation resistance faults, leakage and touch leakage faults, polarity and functional faults. Portable: the simulation board is built into a strong, rugged case with a detachable lid for storing leads, adapters, and manuals. APPLICATION: Presentation of complete safety test-ing of any portable appliance, machine or switchgear. Demonstration of PAT test equipment operation by sales personnel. STANDARDS: Safety (LVD): EN 61010-1
. 16
TY
Appliances Safety
CHARACTERISTICS Protection classication Nominal input voltage Optional on request Power consumption Overvoltage category Frequency range Pollution degree GENERAL DATA Size (mm) Weight 345 x 160 x 335 7 kg 8 demonstration tables (iron, receiver, IEC cord, extension drum, coffee machine, washing machine, switchgear) Class I 230 V (+6 %, -10 %) 115 V (+6 %, -10 %) 15 VA max CAT II/300 V 45 Hz to 66 Hz 2
KEY FEATURES
A practically unlimited number of different pieces of equipment (portable and handheld appliances, machines, switchgears) can be simulated by using different demonstration tables.
ORDERING INFORMATION: Part No. MI 3300 Description Portable Appliance Simulation Board

MI 3300 83002466
Description
PAT Demoboard with demonstration tables (iron, receiver, IEC cord ,extension drum, coffee machine, washing machine,switchgear) Handbook Electrical Equipment Testing on CD Jumper for shorting L and N connections IEC cord Mains cable Class I mains cable for connecting PAT testers to PAT Demoboard Class II mains cable for connecting PAT testers to PAT Demoboard Measuring cable for testing discharging time Carrying bag for demonstration tables Instruction manual Calibration certicate
. 17
Appliances Safety Glossary - Testing the safety of electrical appliances, machines and switchboards
CE Marking It is mandatory that any product sold in the European Union (EU) to have a CE label on it. The CE mark is a conformity mark which proves that a product has met all the health, safety and environmental requirements set out by European Directives in order to ensure that the product is suitable for sale. Loop test In order for a high powered machine or switchgear to discharge correctly and for safety devices to act correctly and within the set time limits, it is important that the impedance of the fault loop (live to earth impedance) that supplies power to the device is adequate and appropriate. A loop test measures the amount of impedance in the wiring that supplies the device. Once measured, this can be compared to fault loop impedance limits set out in the appropriate regulations in order to ensure that the device is safe to use. Appliance A device, machine or piece of equipment, especially an electrical one that is used in the house, such as a cooker or washing machine. Machine A piece of equipment with several moving parts which uses power to do a particular type of work. Switchgear A switching/ interrupting device used in connection with generation, transmission, distribution and conversion of electric power for controlling, metering protecting and regulating devices.
Discharge Time When a high powered appliance or ma-chine is powered up, the inductive and capacitive components within the device become charged. When the device is switched off, people usually assume that the power will be immediately discharged but this is not always the case. Inductive and capacitive components can hold their charge (even after the power has been removed) which can prove dangerous for anybody who comes in contact with the appliance/machine/switchgear. The time it takes for an appliance to discharge can also change with time due to component degradation, impurities and pollution. The discharge time function on the Metrel test instruments measure how long it takes for the device to discharge itself to a safe level of voltage. Functional Test The functional test powers up an appliance to check that it works correctly. While doing this, the instrument can also measure a variety of different information including voltage, current, power usage, cos and power factor.
. 18
Appliances Safety Selection Guide for electrical appliances, machines and switchboards
Part No.:
MI 3321 MultiServicerXA
MI 2094 CE Multitester
MEASUREMENTS Withstanding test 1000 V AC Withstanding test 1890 V AC Withstanding test 2500 V AC Withstanding test 100 - 5000 V AC (500 VA) Earth bond resistance (100 mA) Earth bond resistance (200 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance 250 V DC Insulation resistance 500 V DC Insulation resistance 1000 V DC Differential leakage current Touch leakage current Substitute leakage current Discharging time Leakage current measurement with optional clamp RCD test Line impedance Loop impedance Voltage measurement Frequency measurement Phase rotation indication IEC lead test (polarity test) Functional (load) test ADITIONAL FEATURES PASS/FAIL evaluation Mains supply check Graphical LCD Graphical On-Line help Back light Real time clock QWERTY Keyboard Auto testing Barcode shortcut auto testing Communication ports RS232 / USB Testntag (Barcode scanner + thermal label printer) Downloadable Project upload from PC to instrument Trend (compare) on instruments LCD Trend (compare) with PC SW PAT Link PRO Plus Memory size STANDARD / OPTIONAL ACCESSORIES Barcode scanner Thermal label printer Receipt printer PC SW PAT Link PRO (download, report, data export) PC SW PAT Link PRO Plus (download, PRO Plus report, data export, trend) PC SW CE Link (download, report, autosequence editor) GENERAL DATA Power supply Weight Size (mm)
/ 6000 Optional Optional Optional Optional 110 V / 230 V 8.4 kg 345 x 160 x 335
/ Optional
1638 Optional Optional Optional 230 V 13.5 kg 410 x 175 x 370
. 19
Appliances Safety MI 3321 MultiservicerXA

Portable Appliance, Machine and Switchgear Safety Tester
YE
RRAN
ARS
TY
Sometimes a normal Portable Appliance tester is not sufcient for testing all the equipment found in factories and in industrial locations. For hard wired appliances and large machinery, factors including discharge time, power and current consumption and resistance to excessive voltages play major parts in the safety testing of an appliance and can provide a much deeper insight into the possibility of machine/appliance deterioration. For situations like this, you need the MI 3321 MultiservicerXA. With an easy to use user interface, large LCD screen, quick reference testing guide and extra ports for testing xed installations, the MI 3321 will make easy work out of your safety testing. KEY FEATURES: 3 in 1: tests suitable for testing portable appliances, machines and switchgear with functional and leakage tests being performed up to 16 A. Configurable limits: set limits on functional test and withstanding voltage test to reduce risk of damage to the appliance/machine or tester. Automated: automatic testing and Pass/Fail evaluation of results according to the code of practice. RCD testing: test trip times of Portable RCDs in accordance with the code of practice. Project uploading: upload previous test data for fast retesting of locations (requires PRO Plus software). Scan and test: optional barcoding system and PASS/FAIL barcode label printing make retesting quick and simple. User friendly: large LCD screen, full QWERTY keyboard, help screens and warnings guide the user through correctly testing an appliance. Multi-tasking: can perform hard and soft earth bond test, 250 V / 500 V insulation tests, differential /substitute / touch leakage test, Load tests, fuse tests and polarity tests. Intelligent: hard or soft tests are chosen automatically to reduce the risk of damage occurring on the selected appliance. Downloadable: with memory capacity of 1100 locations, the unit can be downloaded to a computer via the PATLink software. Clamp leakage current measurement: saves time by enabling quick measurement of leakage current with current clamps directly on power supply cable. No need to connect the test appliance to the tester. Discharge time test: measure how long it takes for the machine discharge after power is removed. Withstanding voltage test: instrument perfoms 2500 VAC, 1890 VAC and 1000 VAC withstanding voltage tests with settable current limit. APPLICATION: Factory machinery safety testing. Industrial safety testing. Switchgear safety testing. STANDARDS: Measurements: IEC 60204, IEC 60439-1, IEC 60755, IEC 60598-1, VDE 701, VDE 702, IEC 50144-1, EN 60204 Ed. 5, IEC/EN 60439, IEC 61439, Electromagnetic compatibility (EMC): EN 61326 Safety (LVD): EN 61010-1, EN 50081-1, EN 61000-6-1
Help SOS
110 V 230 V
N L PE
RCD
HV
. 20
Appliances Safety
MEASUREMENTS Withstanding test 1000 V AC Withstanding test 1890 V AC Withstanding test 2500 V AC Earth bond resistance (200 mA) Earth bond resistance (10 A) Insulation resistance 250 V DC Insulation resistance 500 V DC Differential leakage current Touch leakage current Substitute leakage current Discharging time Leakage current measurement with optional clamp RCD test Line impedance Loop impedance Voltage measurement Frequency measurement Phase rotation indication IEC lead test (polarity test) Functional (load) test ADITIONAL FEATURES PASS/FAIL evaluation Mains supply check Graphical LCD Graphical On-Line help Back light Real time clock QWERTY Keyboard Auto testing Barcode shortcut auto testing Communication ports RS232 / USB Testntag (Barcode scanner + thermal label printer) Downloadable Project upload from PC to instrument Trend (compare) on instruments LCD Trend (compare) with PC SW PAT Link PRO Plus Memory size STANDARD / OPTIONAL ACCESSORIES Barcode scanner Thermal label printer Receipt printer PC SW PAT Link PRO (download, report, data export) PC SW PAT Link PRO Plus (download, PRO Plus report, data export, trend) GENERAL DATA Power supply Weight Size (mm) 110 V / 230 V 8.4 kg 345 x 160 x 335 Optional Optional Optional Optional / 6000 Fast and easy access to test procedure: select the auto test and press START
KEY FEATURES
ORDERING INFORMATION: Part No. MI 3321 Description MultiservicerXA

MI 3321 20691908 A 1053 20691127 20691121 20691124 20691126 20691123 A 1014 A 1016 A 1062 A 1015 A 1013 20901023
Description
MultiServicerXA HV test lead Plug test cable 3 wire test lead Test lead (black, 1.5 m) Test lead (red, 1.5 m) Test lead (red, 4 m) Test lead (green, 1.5 m) Test probe (black) Test probe (red) Test probe (green) Test probe (blue) Crocodile clip (black, 3 pcs) Protective bag for accessories PC SW PAT Link PRO with RS232 and USB cable Instruction manual Calibration certicate
. 21
Appliances Safety MI 2094 CE Multitester

Portable CE marking verication device
YE
RRAN
ARS
TY
MI 2094 CE Multitester is in a class of its own aimed for CE certication of electrical appliances, machines and switchboards during the production. It is also very suitable for testing the appliance after repairs and maintenance work. With the ability to test a multitude of different appliances to ensure that they conform to the CE safety legislation, the MI 2094 still manages to remain portable, safe and easy to use. The optional PC software A 1073 CE Link enables the upload of automated test sequences (autosequences), downloading of test results directly to the PC, automatic data storage into a le and also prints test reports. The MI 2094 makes light work of a very complex job. KEY FEATURES: Portable: CE tester can easily be moved between locations or mounted for ease of use. Safe: high quality accessories and optional safety devices ensure that testing can be performed in a controlled, safe environment. Easy to use: rotational dial makes selecting single test simple and easy while the programmable autosequence testing make life even easier and stops the risk of missing a test. Automatic: programmable autosequences via the optional CE Link software. Downloadable: the optional PC software A 1073 CE Link enables the upload of test sequences (autosequences), downloading of test results directly to the PC, enables automatic data storage into a le and also prints test reports. APPLICATION: Verifying that manufactured products meet the European safety legislation. For testing of electrical appliance after repairs and maintenance work. STANDARDS: Measurements: IEC 60204-1, IEC 60335-1, IEC 60439-1, IEC 60598-1, IEC 60745, IEC 60755, IEC 60950, IEC 61029, IEC 61558-1, EN 60065, VDE 701 T1, VDE 702 T1 Electromagnetic compatibility (EMC): EN 61326, VDE 701 T1, VDE 702 T1 Safety (LVD): IEC 61010-1
Help SOS
110 V 230 V
N L PE
RCD
HV
. 22
Appliances Safety
MEASUREMENTS Withstanding test 1000 V AC Withstanding test 1890 V AC Withstanding test 2500 V AC Withstanding test 100 - 5000 V AC (500 VA) Earth bond resistance (100 mA) Earth bond resistance (200 mA) Earth bond resistance (10 A) Earth bond resistance (25 A) Insulation resistance 250 V DC Insulation resistance 500 V DC Insulation resistance 1000 V DC Differential leakage current Touch leakage current Substitute leakage current Discharging time Voltage measurement Functional (load) test ADITIONAL FEATURES PASS/FAIL evaluation Mains supply check Graphical LCD Back light Real time clock Auto testing Communication ports RS232 / USB Downloadable Memory size STANDARD / OPTIONAL ACCESSORIES Barcode scanner Receipt printer PC SW CE Link (download, report, autosequence editor) GENERAL DATA Power supply Weight Size (mm) 230 V 13.5 kg 410 x 175 x 370 Optional Optional Optional /Optional 1638 Multi - input / output ports: Barcode reader RFID reader / writer Printer PC
KEY FEATURES
ORDERING INFORMATION: Part No. MI 2094 Description CE Multitester

MI 2094 A 1075 A 1076 A 1077 A 1078 A 1013 A 1064 A 1079 A 1080 20900957
Description
CE MultiTester HV test pistol with 2 m cable, 2 pcs CONTINUITY test lead 2.5 m, 2 pcs Red INSULATION test lead 2.5 m Black INSULATION test lead 2.5 m Crocodile clip - black, 3 pcs Crocodile clip - red, 2 pcs Discharge time cable Mains cable Accessories bag Instruction manual Calibration certicate
. 23
Appliances Safety Accessory selection guide

MI 3302 MI 3311 MI 2142 MI 3304 MI 3305 MI 3321

Photo
Product group
Part No.
Carrying neck strap
Neck strap for carrying A 1302 MI 3000 series test instruments.
Soft hand strap
A 1303
Soft hand strap for carrying instruments. Bag is suitable for instrument and accessories. Bag is suitable for instrument and accessories. Bag is suitable for instrument and accessories.
A 1006 Soft carry bag A 1289
Smal soft carry bag
A 1271
Fast 6 cells AA battery charger with a set of 6 pcs of NiMH A 1160 batteries including mains plug and car adapter. High voltage insulation test can be started safely and remotely A 0941 by using the pedal which additionally allows free hand operation of the worker. Warning lamps visually signalises on-going phases of A 0942 HV insulation test and warns the user on dangerous voltage conditions. Current clamp-on adapter with jaw opening 51 mm for A 1018 low range and leakage current measurements on EIS and PAT applications. Leakage clamp for accurate A 1283 leakage current measurement. RS232- COM cable for A 1017 connecting the tester with the PC. CE Link PC Software is multipurpose download software for A 1073 programming of the CE Multitester, creation of test reports and test data evaluation. A 1117 Basic download software with test report creation feature.
Remote Remote control pedal testing device
Remote Warning lamp testing device
Clamps
Current clamp (low range, leakage)
Clamps
Leakage clamp
Software, Books, publications Software, Books, publications Software, Books, publications
RS232 communication cable
PS SW CELink with RS232 cable
PS SW PATLink with RS232 cable
. 24
MI 2094

Appliances Safety
MI 3302
MI 3311
MI 2142
MI 3304
MI 3305
MI 3321

Photo
Product group
Software, Books, publications Software, Books, publications Software, Books, publications Software, Books, publications
Part No.
Upgrade code PC SW PAT Link PRO to PAT Link Plus
PC SW PAT Link PRO with USB and RS232-PS/2 cable
PC SW PAT Link PRO Plus with USB and RS232-PS/2 cable
Advanced PC SW enables download, PRO Plus report A 1203 printout, trend (compare) featrure,and upload to some top range Metrel instruments. Advanced PC SW enables download, PRO Plus report A 1305 printout, trend (compare) featrure,and upload to some top range Metrel instruments. Advanced PC SW enables download, PRO Plus report A 1306 printout, trend (compare) featrure,and upload to some top range Metrel instruments. A 1171 RS232 / USB adapter for PCs without USB COM port.
USB / RS232 converter
Other
110/230 V adapter
Test instrument power supA 1104 ply adapter for plugging test instrument into 110 V supply. 110 V adapter for plugging A 1136 110 V appliances into PAT testing instruments. Test instrument power sup04-1002 ply adapter for plugging test instrument into 110 V supply. Quick printing of test results A 1103 measured with PAT test instrument onto receipt paper. Identication of barcode A 1105 labelled appliances is supported by the barcode reader.
Other
110 V adapter
Other
IEC- 110 V adapter
Scanners, printers and labels Scanners, printers and labels Scanners, printers and labels Scanners, printers and labels Scanners, printers and labels Scanners, printers and labels
Receipt Printer
Barcode scanner
RS232 cable 9/25 pin for printer
A 1226
Communication cable for A 1103 receipt printer
Label printer with power and data cable (RS232)
Printer supports printing of identication labels containA 1276 ing a complete appliance data information with PASS or FAIL test data evaluation. Appliances can be marked A 1106 with barcode labels for easier identication.
Barcode labels
Spare label roll, size 50 x 30 mm
A 1295
Spare printing rolls for A 1276 printer.
. 25
MI 2094

Appliances Safety
MI 3302
MI 3311
MI 2142
MI 3304
MI 3305
MI 3321

Photo
Product group
Part No.
Test probe for use with the A 1013.
Test leads, cables, probes Test probe, black and crocodile clips Test leads, cables, probes Test probe, red and crocodile clips Test leads, cables, probes Test probe, green and crocodile clips Test leads, cables, probes Crocodile clip (Red) and crocodile clips Test leads, cables, probes Crocodile clip (Black) and crocodile clips Test leads, cables, probes Crocodile clip (Green) and crocodile clips Test leads, cables, probes Test cable 20 m and crocodile clips Test leads, cables, probes Test cable 4 m and crocodile clips Test leads, cables, probes HV test lead with plug 6 m, and crocodile set of 2 pcs clips Test leads, cables, probes CONTINUITY test lead 10 m, and crocodile set of 2 pcs clips Test leads, cables, probes Continuity test lead 2,5 m and crocodile clips Test leads, cables, probes Continuity extension, 10 m, and crocodile set of 2 pcs clips
A 1014
A 1016
Test probe for use with the A 1013.
A 1062
Test probe for use with measuring cable.
Crocodile clip is useful for staA 1064 ble connection of measuring cable to test point. Crocodile clip is useful for staA 1013 ble connection of measuring cable to test point. Crocodile clip is useful for staA 1309 ble connection of measuring cable to test point. Extension cable for insulaA 1153 tion resistance and continuity measurement. Extension cable for insulaA 1154 tion resistance and continuity measurement. High voltage extension test S 1057 leads for measurements on larger electrical equipment. 10 m test leads for PE S 1058 continuity and earth bond measurement. Special extension lead for 4 S 1072 lead earth bond measurement with high curent (10 A, 25 A).
S 2012
Extension test lead for continuity measurements.
. 26
MI 2094

LAN Cabling Certication
Glossary - LAN Cabling Certication Selection Guide for LAN Cabling Certication MI 2016 Multi LAN 350 MI 5100 Opto LAN ACCESSORIES
5 5 5 5 5
- - - - -
02 03 04 06 08
TECHNICAL CATALOGUE
2010
Computer Network Cable Testers and Certiers
LAN Cabling Certication Glossary - LAN Cabling Certication

Wire map Provides a visual map of how the connections on either side of a multicore cable are connected together. Near end The part of the cable which is closest to the master test engineer. Far end The part of the cable which is furthest away from the master test engineer Crosstalk When the magnetic eld generated by a pairs of wires creates interference on another pair of wires. This is sometimes abbreviated to XT Near End Crossover Talk (NEXT) NEXT monitors the effect sending a signal down one set of wires has on a second set of wire. Leaving the far end of the wires open, a signal is sent down one pair of wires and the induced signal is measured on the second set of wire. The ratio of the sent signal compared to the induced signal provides the NEXT value. NEXT tests should be performed at both sides of the cable. If a remote unit is used, one unit can check the transmitting side of the cable and by setting the MultiLAN to Remote NEXT test, the other side of the cable can be tested without the test engineer having to move location. Power Sum Near End Cross Talk (PSNEXT) In most modern LAN systems, a standard cable will contain 8 wires. PSNEXT looks at the effect of sending signals down three pairs of wires has on the pair of wires under test. This is calculated by performing a NEXT test on each pair of wires and then summing all the values together to create the PSNEXT value for the pair of wires under test. In most cases, the PSNEXT test should be performed from both sides of the cable, hence the Remote PSNEXT test function can be used. Far End Crossover Talk (FEXT) FEXT looks at the effect a signal induced into one pair of wires will have on a receiver connected to a second pair of wires. To perform the test, a signal placed onto a single pair of wires and the signal on the other set of wires is measured at the other end of the cable. Equal level far end crossover talk (ELFEXT) ELFEXT is a FEXT test which takes into account the attenuation of the wires (providing a more realistic representation of the wires) Power sum equal level far end crossover talk (PSELFEXT) In most modern LAN systems, a standard cable will contain 8 wires. PSELFEXT looks at the effect of sending signals down three pairs of wires has on the pair of wires under test. This is calculated by performing a ELFEXT test on each pair of wires and then summing all the values together to create the PSELFEXT value for the pair of wires under test. Attenuation The loss of strength in a signal as it is transmitted over a cable or bre Attenuation to crosstalk Ratio (ACR) The difference between attenuation and crosstalk, measured in dB, at a given frequency. The higher the ACR value is, the better the signal is at the receiving end compared to the crosstalk interference signal. The ACR value should be taken at both ends of the cable, hence the Remote ACR function is provided to stop the engineer continually having to move the master unit between locations. Propagation delay The time it takes for a signal to pass from one side of the cable to the other. Delay Skew In multi-core cable, where each pair has their own propagation delay time, the delay skew is the difference between the rst signal arriving and the last signal arriving.
.
LAN Cabling Certication Selection Guide for LAN Cabling Certication

YE
ARS
Part No.:
MI 2016 Multi LAN 350
RRAN
3 years manufactures waranty LAN testing up to CAT 6
5/5e/6
CAT
FEATURES Frequency range CAT 6 CAT 5 / 5e CAT 3 Internal memory PC Software RS232 port and cable USB port and cable Talk over copper (Talk set) Cable identiers RJ 45 output Opto LAN ber test support TEST FUNCTIONS Wiremap NEXT / Remote NEXT PSNEXT / Remote PSNEXT ELFEXT / PSELFEXT Return Loss / Remote Return Loss ACR / Remote ACR PSACR / Remote PSACR Length Propagation delay Delay skew Impedance DC resistance TDR TDR with TDnext / / / / / / 0 - 350 MHz /
TY
350 MHz
High frequency range
FIBER
Fiber optic LAN testing
TDR
Time domain reectometer
AUTO
test
Automatic test sequence
Graphical
LCD
Graphical LCD
1 - 28
Cable locator
Downloadable
. 3
LAN Cabling Certication MI 2016 Multi LAN 350

Professional LAN cable testing system
YE
RRAN
ARS
TY
5/5e/6
CAT
350 MHz
The MI 2016 Multi LAN 350 is a high performance, top quality, competitively priced LAN tester with the capabilities of testing up to CAT 6 (Class E) cabling (both permanent and channel). The fast and seamless execution of a complete autotest can be performed within 55 seconds. The built-in intercom system allows easy communication through the length of the cabling. The autosequences, single tests (useful in troubleshooting), software as standard and the complete selection of accessories make LAN testing simple, easy and comprehensive. KEY FEATURES: Top class CAT6/Class E LAN certication tester for testing high speed networks with a test frequency up to 350 MHz. Extensive database of Autotests for complete and quick LAN cabling verication in accordance with all leading test standards. Adapters available from the standard kit allow for both Channel and Permanent Link connection. High resolution TDR with TD Next function for quick determination of a distance to a faulty point along the cable. LANLink PC software package for seamless report creation and documentation of test results. Supports test standards TIA Cat 5e and 6, ISO 11801 Class D and Class E, EN 50173 Class D and E, etc. Simple, easy and comprehensive. APPLICATION: Verication of LAN networks up to CAT6/Class E. Troubleshooting in IT networks. STANDARDS: Test standards: TIA Cat 5e and 6, ISO 11801 Class D and Class E, EN 50173 Class D and E, etc Safety (LVD): IECIEN 611010-1 IEC 60825-1
FIBER
TDR
AUTO
test
Graphical
LCD
1 - 28
.

SINGLE TESTS Wire map PSNEXT, Remote PSNEXT NEXT, Remote NEXT ELFEXT, Remote ELFEXT PSELFEXT, Remote PSELFEXT RETURN LOSS, Remote RETURN LOSS Attenuation PSACR, Remote PSACR ACR, Remote ACR Length Delay Skew Propagation Delay Impedance DC Resistance SCOPE FUNCTIONS TDR and TDnext Scope Test procedure AUTOTEST - COPPER CABLES Complete, Near End, Far End Autotest SPECIAL FEATURES PASS/FAIL evaluation Talk & trace interface Locating cables Noise Filter GENERAL DATA Permanent link connection Channel connection Feature Standard Test Standards Cable Types Autotest time: Display: Memory USB and RS232 communication ports Charging time Typical battery life External supply/charger Power supply main unit Size (mm) Weight

TSB 67, TSB 95, TIA/EIA 568-B Level III TIA Cat 5e, 6 ISO 11801 Class D (2002), E EN 50173 Class D (2002), E... UTP, STP, ScTP, FTP 55 sec (standard CAT6 test) LCD Graphic type, 320 x 240 dots, backlight 500 Autotests 12 hours 8 hours 6 x 1.5 NiMH type C rechargeable batteries 265 x 110 x 185 2.1 kg
Description
MI 2016ST Multi LAN 350 STANDARD (ST) KIT INCLUDES: Part No.
MI 2016 20050418 20050419 20050420 A 1042 20050421 A 1135 A 1041 S 2019
Description
Multi LAN 350 Remote unit Multi LAN 350 Permanent Link adapter, 2 pcs Chanel Link adapter, 2 pcs Locators (#1 - #4), 4 pcs Attenuation calibration module Power supply adapter, 2 pcs Headphones set, 2 pcs 6 x 1.2 V NiMH batteries, 2 pcs PC SW LAN Link with USB and RS232 cable Instruction manual Calibration certicate
ORDERING INFORMATION: Part No. Description
MI 2016PS Multi LAN 350 PRO (PR) KIT INCLUDES:
KEY FEATURES
Description
Similar content as MI 2016ST: Remote unit Multi LAN 350 replaced by Instrument Multi LAN 350
Selectable test standards for complet and quick LAN cabling verication.
TDNext function for determination of faulty points.
.
LAN Cabling Certication MI 5100 OptoLAN

Fiber optic cable tester
YE
RRAN
ARS
The MI 5100 OptoLAN is intended for the verication of ber optic parts of a LAN network. Test results can be compared against limits dened by the LAN standards (all popular standards included on the PM 420). Results can be either stored on the MI 5100 OptoLan and downloaded by USB to a computer or sent individually, by infra-red link, to the MI 2016 MultiLAN. KEY FEATURES: Measures Insertion loss and optical power. Automatic wavelength detection on Powermeter PM420, no need for manual selection. Powermeter PM420 supports six wavelengths (MM-multimode and SM- Singlemode). Small size and light weight with very low power consumption. Built-in battery charger. Combined with MI 2016, the MI 5100 can create a cost effective solution for the verication of ber and copper LAN networks. APPLICATION: Testing ber link performance. Verication of ber networks. Troubleshooting and fault nding of connections/links etc. STANDARDS: MM LAN cabling and application standards: TIA/EIA 568A horizontal/backbone ISO 11801 Channel/Link EN 50173 Channel/Link 10Base/100Base/1000Base series Measurement standards: ANSI/TIA/EIA-526-14A EN 61280-4-2 Safety (LVD): IECIEN 611010-1 IEC 60825-1
.
TY
FIBER

OPTICAL POWER METER PM420 PM420LAN SPECIFICATIONS Photodetector 1 mm InGaAs Working wavelengths Uncertainty Accuracy Resolution Dynamic range Dynamic range AWD mode GENERAL DATA Graphic LCD with BL PASS/FAIL evaluation CW mode AWD mode No. of memory locations Communication Size (mm) Weight Power supply Battery working time Power supply adapter 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 (1650) nm 0.2 dBm 5 % 0.01 dB, 0.01 dBm -60 dBm to +10 dBm -53 dBm to +17 dBm -47dBm -40dBm (PM420-LAN only) 512 USB, IrDA 24 x 79 x 125 0.1 kg 2 x NiMH type AA rechargeable batteries > 40 hrs
MI 5100ST OptoLAN STANDARD (ST) KIT INCLUDES: Part No.

PM420 LS420 A 1133 83005413 A 1186 83004993
Description
Optical Power Meter PM420 Optical Light Source LS420 Carrying bag Visible pen VSP-01 Patch cord FC - ST 50 m Patch cord FC - SC 50 m Patch cord ST - SC 50 m Patch cord FC - ST 62.5 m Patch cord FC - SC 62.5 m Patch cord ST - SC 62.5 m CS adapter ST adapter IR ber adapter FOA-1 PC SW package LAN Link USB cable 4 x 1.2 V NiMH batteries Battery charger, 2 pcs Instruction manual Calibration certicate
OPTICAL LIGHT SOURCE LS420 SPECIFICATIONS OUTPUT POWER LED 850 nm LED 1300 nm Laser 650nm GENERAL DATA Stability (1 hour, delta/2): Size (mm) Weight Power supply Battery working time Power supply adapter
-20 dBm (62.5 m) -20 dBm (62.5 m) LS420 (LED850/LED30/LD650) or VSP-05 0.03 dB 24 x 79 x 130 0.1 kg 2 x NiMH type AA rechargeable batteries > 15 hrs
MI 5100PS OptoLAN PRO (PS) KIT INCLUDES: Description
KEY FEATURES
IR Fiber adapter FOA-1 enables transferring the test results from the memory of Optical Power Meter PM 420 to the instrument Multi LAN 350 MI 2016. The Multi LAN tester automatically recognise the adapter and the screen of the instrument will turn into ber testing mode. The measurement results can be stored in the three-level memory structure of Muti LAN 350 and arranged further on in a professional nal report supported by LAN Link PC software.
Similar content as MI 5100ST: PM420 replaced by PM420LAN
.
LAN Cabling Certication Accessory selection guide

MI 2016 Product group Accessory description Part No. Instrument Application
Large soft carrying bag for transport and storage of test instrument and belonging accessories.
Photo
Soft carrying bag
A 1006
Fast charger
Fast charger for 12 AA / 6 C A 1169 type / 6 D type / 4 x 9 V block type. Fast 6 cells AA battery charger A 1160 with a set of 6 pcs of NiMH battaries.
NiMH battery, C type
A 1046
Set of 6 pcs NiMH battery. Locators simplify and accelerate nummerication and identication of LAN sockets. Set includes locators with number from #5 up to #16. As described above. Transponders with numbers from #17 up to #28 are delivered with the set. Microscope for checking the surface connections of Fiber optic cable. Additional light source for single mode ber optic cable testing. Mandrels used with LED source and optical power meter when measuring optical power loss in multimode ber optic cabling. Wet cleaning tools are intended for optic cable surfaces and connections cleaning. Dry cleaning tools are intended for optic cable surfaces and connections cleaning. Talk set with earphones allows communication over the communication cable.
Locators
Locator set II (#5 to #16). 12 pcs
A 1043
Locators
Locator set III (#17 to #28). 12 pcs
A 1044
Other
Illuminated microscope
A 1184
Other
Optical Light source LS420 SM with Patch cord (3 pcs) for single mode (SM)
A 1185
Other
Multimode Fiber mandrels, 2 pcs
A 1187
Other
Wet cleaning tools with carrying bag
A 1188
Other
Dry cleaning set
A 1189
Remote Headphones testing device
A 1041
.
MI 5100

Glossary - Indoor Environment Quality Selection Guide for Indoor Environment Quality MI 6201 Multinorm MI 6301 FonS MI 6401 Poly ACCESSORIES
6 6 6 6 6 6
- - - - - -
02 04 06 08 10 12
TECHNICAL CATALOGUE
2010
Environmental monitoring equipment for testing the conditions of Indoor environments
Indoor Environment Quality
Indoor Environment Quality Glossary - Indoor Environment Quality

HVAC Heating, Ventilation and Air Conditioning IEQ Indoor Environmental Quality encompasses all aspects of the indoor setting including air quality, ventilation, thermal comfort, lighting and noise. IAQ - Indoor air quality may be broadly dened as the nature of air that affects the health and wellbeing of occupants. WBGT Wet Bulb Globe Temperature is commonly used as a guidance for environmental heat stress to prevent heat stroke during physical exercise or while at work. It determines heat stress given in humans on the job in thermally harsh environments. It is specied in ISO 7243 under Hot Environments. Estimation of the heat stress on is based on the WBGT-index. PMV Predicted Mean Vote is average comfort vote predicted by a theoretical index for a group of subjects when subjected to a particular set of environmental conditions. PPD Predicted Percentage Dissatised is the percentage of subject population who will be dissatised (uncomfortable) in a given environment as predicted by a theoretical index. Class 1 / Class Instruments, processors and probes are classied as being Class 1 or Class 2 (also Type 1 or Type 2) according to the measurement accuracy achieved. A class 1 instrument may only be formed by combining a class 1 probe with a class 1 processor. Class 1 processor shall, at least, cover the range from 45 Hz to 7.1 kHz in one third octave bands. Class 2 processor shall, at least, cover the same range, or 45 Hz to 5,6 kHz in octave bands, as specied in ISO 9614. Octave The difference between two frequencies where one is twice the other. For example, 200 Hz is an octave higher than 100 Hz. 400 Hz is one octave higher than 200 Hz. Decibel (dB) A logarithmic measurement unit that describes a sounds relative loudness, though it can also be used to describe the relative difference between two power levels. In sound, decibels generally measure a scale from 0 (the threshold of hearing) to 130 dB (the threshold of pain). A 1dB difference over a broad frequency range is noticeable to most people, while a 0.5 dB difference can affect the subjective impression of a sound. Illuminance The density of incident luminous ux on a surface; illuminance is the standard metric for lighting levels, and is measured in lux (lx). Luminance The luminous intensity of a surface in a given direction per unit area of that surface as viewed from that direction. Carbon monoxide (CO) Poisonous gas that has no color or odor. It is given off by burning fuel (as in exhaust from cars or household heaters) and tobacco products. Carbon monoxide prevents red blood cells from carrying enough oxygen for cells and tissues to live. Carbon Dioxide (CO) Colorless, odorless, noncombustible gas. Present in the atmosphere as a result of the decay of organic material and the respiration of living organisms, and it represents about 0.033% of the air. Carbon dioxide is produced by the burning of wood, coal, coke, oil, natural gas, or other fuels containing carbon, by the action of an acid on a carbonate, or naturally from springs and wells. Measurement with universal microclimatic, illuminance, CO and CO2 probes.
.
Thermal comfort and calculation.
measurement
Detailed CO and CO2 measurement.
Sound level measurement, 1/1 and 1/3 octave analisys.
Recalling of memory, sample of help menu.
. 3
Indoor Environment Quality Selection Guide for Indoor Environment Quality
Part No.:
MI 6201PR
MI 6201EU Multinorm
MI 6201ST
FEATUERS Air Velocity Air Flow Relative Humidity Dew point Air teperature Temperature difference K Thermocouple temperature Illuminance Luminance Contrast Black globe radiant temperature CO concentration CO2 concentration SOUND Class 1 (IEC 1672) SLM Class 2 (IEC 1672) SLM Real time 1/1 octave analysis Real time 1/3 octave analysis TEST PROBES A 1091 Universal microclimatic probe m/s, %rh, C A 1127 Humidity/Temperature probe %rh, C A 1092 Illuminance probe type B A 1132 Luminance probe A 1128 Thermocouple probe A 1146 Class 1 sound probe A 1151 Class 2 sound probe A 1131 Black globe thermometer A 1180 CO2 probe A 1181 CO probe PC SOFTWARE A 1134 SensorLink PRO A 1167 SoundLink LITE A 1162 SoundLink PRO CERTIFICATES ISO calibration certicate for complete system Calibration certicate Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
.
YE
Fons
Poly
RRAN
TY
MI 6301PR
MI 6301EU
MI 6401EU
MI 6401ST
ARS
LUX
Illuminance measurement
Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Optional Optional Optional Optional Optional Optional Optional
dB
A/C/Z
Sound level measurement with A,C and Z weighting
Temperature measurement
dB
Octave analysis
flow m/s
AIR
Air velocity and ow measurement
CO/ CO2
Optional Optional Optional
RH
%
CO and CO2 measurement
Relative humidity measurement
Optional Optional Optional
PMV PPD
PMV and PPD on-line measurement
REC
Logger mode
Downloadable
.
Indoor Environment Quality MI 6201 Multinorm

YE
ARS
Fully adaptable, professional indoor environment analyser
RRAN
TY
LUX
dB
A/C/Z
dB
Poor working conditions can lead to low motivation, illness, stress and an increase in work related injuries. The MI 6201 is an invaluable tool for the monitoring and evaluation of indoor environmental conditions according to national and European standards. Adaptable by design and extremely easy to use, the MI 6201 can be used for measuring an amazing variety of different environmental conditions (most performed to an array of national and international standards and regulations). The SensorLink PRO and SoundLink LITE software come as standard accessories and enable downloading data stored in the memory, plotting and printing test results in table and graphic form, on-screen graph plotting for straightforward data comparison and export of data in text le format. The Euro kit comes complete with full ISO accredited calibration certicate while the PRO kit comes complete with ISO calibration and an upgraded sound probe (class 1 standard). KEY FEATURES: Adaptable: the MI 6201 Multinorm can be used as either a sound meter or environmental meter to reduce the amount of equipment to move between locations. Environmental: using various standard and optional probes, the MI 6201 can be adapted to measure and calculate a combination of up to 16 different environments conditions (maximum 11 at the same time). Sound: the MI 6201 can display 21 different sound quantities (displaying a maximum of 6 at a time) and will download 17 of these measurements for data analysis Long lasting: record up to 160 days worth of data. Accommodating: can be used for spot checking different locations or performing long investigations in a specific location. Easy to use: plug in the suitable probes and the device will automatically adjust for appropriate measurements. PPD and PMV calculations: predicted Percentage of Dissatisfied people (PPD) and Predicted Mean Vote (PMV) calculations performed automatically. Note: requires A 1131 black globe. Weighting: A, C and Z weightings with fast, slow and impulse weightings and full and 1/3 octave analysis in accordance with EN 61672 standard and EN 61260 respectively. Downloadable: up to 4000 test results can be stored in a two level memory structure.
flow m/s
AIR
CO/ CO2
RH
%
PMV PPD
REC
APPLICATION: Indoor areas where the public can freely enter and leave. Factory conditions. Industrial process monitors. Power stations. Ofces. Domestic dwellings. Indoor or dry outdoor sound level measurement. Industrial sound measurement. Band-pass and acoustic lter testing. Working environment testing. Calibration work. Acoustic Equipment testing. STANDARDS: EN 61010-1 Safety EN 61326 EMC DIN 5032 P1 Photometry; methods of measurement DIN 5032 P2 Photometry; Operation of electric lamps and measurement of the respective quantities DIN 5032 P3 Photometry; Terms of measurement on gas luminaires DIN 5032 P4 Photometry; Measurement of luminaires DIN 5032 P6 Photometry; Photometers; Concepts, characteristics and their designation DIN 5032 P7 Photometry; Classication of illuminance meters and luminance meters EN 60751 Industrial platinum resistance thermometer sensors EN 60584-1 Thermocouples - part 1: reference tables (IEC 60584-1:1995); EN 12599 Ventilation for buildings Test procedures and measuring methods for handling over installed ventilation and air conditioning systems EN ISO 7726 Ergonomic of thermal environment - Instruments for measuring physical quantities ISO 10526 CIE STANDARD colorimetric illuminants ISO 10527 CIE STANDARD colorimetric observers
.

MI 6201 SPECIFICATION (FOR THE STANDARD SET) Illuminance (A1092 type B probe) Illuminance range 0.01 lux to 20000 lux 0.01 lux to 19.99 lux 0.02 lux + 8 % 20.0 lux to 20000 lux 8% SOUND (A 1151 CLASS 2 PROBE & 1146 (A 1151 CLASS 1 PROBE) Noise weightings A, C, Z Time weighting Fast, slow, impulse Frequency range (A 1151) 20 Hz - 10000 Hz Frequency range (A 1146) 20 Hz - 20000 Hz EN61672 Class 2 conformance EU kit EN61672 Class 1 conformance PR kit MICROCLIMATE PROBE (A 1091) Air temperature range -20 C to 60 C Air temperature accuracy 0.2 C at 25 C (0.5 C over working range) Relative humidity range 0.0 % to 100.0 % Relative humidity accuracy (10 % - 90 %RH) 2 % Dew point calculation AIR VELOCITY Air velocity range 0.10 m/s to 20.0 m/s Air velocity accuracy (0.10 m/s to 9.99 m/s) (0.05 m/s + 5 %) Air velocity accuracy (10.0 m/s to 20.0 m/s) 5 % EXTRAS Globe Temperature (WBGT) Index Natural Wet Bulb Temp requires A 1131 black globe Black Globe Radiant Temperature PMV and PPD measurement Luminance requires A 1132 Luminance probe Contrast CO concentration requires A 1181 CO probe CO2 concentration requires A 1180 CO2 probe Standard K type thermocouple range requires A 1128 probe DOWNLOADING Memory up to 4000 locations Downloading methods USB Software included GENERAL DATA Size (mm) 110 x 85 x 220 Weight 0.5 kg Power supply 6 x AA (rechargable) or mains Internal charging circuitry
MI 6201ST Multinorm STANDARD (ST) KIT INCLUDES: Part No.

MI 6201 A 1144 A 1091 A 1092 A 1151 A 1157 A 1133 83004993 A 1135 A 1147 20242681 A 1274
Description
Multinorm Probe adapter Microclimatic probe Illuminance probe type B Class 2 sound probe with plastic shield (A 1158) Windscreen Carrying case USB cable Power supply adapter/charger 6 NiMH batteries Tripod adapter SensorLink PRO SoundLink LITE software Instruction manual Calibration certicate
MI 6201EU Multinorm EURO (EU) KIT INCLUDES: Description

Standard kit with ISO calibration certicate for complete system instead of Calibration certicate.
MI 6201PS Multinorm PRO (PR) KIT INCLUDES:
KEY FEATURES
Description
Euro kit with Class 1 sound probe (A 1146) instead of Class 2 sound probe (A 1151).
Measurement with universal microclimatic probe.
Thermal comfort measurement and calculation.
.
Indoor Environment Quality MI 6301 FonS

Professional sound measurement and monitoring test instrument
YE
RRAN
ARS
TY
dB
A/C/Z
dB
For a truly professional sound level meter, look no further than the MI 6301 Fons. Not only does the unit contain the usual A, C and Z weightings with fast and slow time weightings (in accordance with IEC 61672 standard), the unit has 2 independent sound channels which can be set to different weightings. Being able to display up to 6 different readings on the customisable screen, the MI 6301 Fons is ideal for spot checking different locations or performing long term analysis of an area. The SoundLink LITE software, which comes as standard with the unit, allows data to be downloaded, reviewed, exported and printed while the optional SoundLink PRO software enables full data analysis, charting and report generation. The Euro set includes a Class 2 sound probe and full ISO accredited calibration certicate while the PRO set includes a Class 1 sound probe with full ISO accredited calibration certicate. KEY FEATURES: Adaptable: the MI 6301 can display 21 different sound quantities (displaying a maximum of 6 at a time) and will download 17 of these measurements for data analysis. Weighting: A, C and Z weightings with fast, slow and impulse weightings in accordance with EN 61672 standard. Dual measuring: two independent sound measuring channels that can be set to different time and weighting settings. Octave measurement: real time octave and one third octave frequency measurement in accordance with EN 61260. Long lasting: record up to 80 days worth of data. Accommodating: can be used for spot checking different locations or performing long investigations in a specific location. One stop readings: configure the display to show the readings required including MAX and MIN readings, peak readings, equalised readings, channel 1 and channel 2 readings. Easy to use: plug in sound probe then press a couple of buttons and the unit is recording. Downloadable: up to 2000 test results can be stored in the two level memory structure. APPLICATION: Indoor or dry outdoor sound level measurement. Industrial sound measurement. Band-pass and acoustic lter testing. Working environment testing. Calibration work. Acoustic Equipment testing. STANDARDS: EN 61010-1 Safety EN 61326 EMC EN 61672 Electroacoustics Sound level meters EN 61260 Electroacoustics Octave-Band and Fractional Octave-Band Filters
REC
.

MI 6301 SPECIFICATION (FOR THE STANDARD SET) SOUND (A 1151 CLASS 2 PROBE & 1146 (A 1151 CLASS 1 PROBE) Noise weightings A, C, Z Time weighting Fast, slow, impulse Frequency range (A 1151) 20 Hz - 10000 Hz Frequency range (A 1146) 20 Hz - 20000 Hz EN61672 Class 2 conformance EU kit EN61672 Class 1 conformance PR kit DOWNLOADING Memory up to 2000 locations Downloading methods USB Software included GENERAL DATA Size (mm) 110 x 85 x 220 Weight 0.5 kg Power supply 6 x AA (rechargable) or mains Internal charging circuitry
MI 6301EU FonS EURO (EU) KIT INCLUDES: Part No.

MI 6301 A 1151 A 1157 A 1133 83004993 A 1135 A 1147 20242681
Description
FonS Class 2 sound probe with plastic shield (A 1158) Windscreen Carrying case USB cable Power supply adapter/charger 6 NiMH batteries Tripod adapter SoundLink LITE software Instruction manual Calibration certicate ISO calibration certicate for complete system
KEY FEATURES
MI 6301PS FonS PRO (PR) KIT INCLUDES: Description

Sample of on-line reading data analysis with SoundLink PRO PC software. Logged data analysis with SoundLink PRO PC software. Euro kit with Class 1 sound probe (A 1146) instead of Class 2 sound probe (A 1151).
Sound measurement, 1/1 and 1/3 octave analisys.
.
Indoor Environment Quality MI 6401 Poly

Professional Light, temperature and humidity analyser
YE
RRAN
ARS
TY
LUX
APPLICATION: Indoor areas where the public can freely enter and leave. Factory conditions. Industrial process monitors. Power stations ofces. Domestic dwellings. Ventilation testing. Light, ventilation and humidity are extremely important factors in the working environment. Poor lighting conditions can cause drowsiness, headaches, illness and accidents. Poor ventilation and humidity can perpetuate the spread of sickness and disease. The MI 6401 Poly is designed specically for testing the light, humidity and air temperature and air velocity of an environment and can be used for monitoring. Emergency lighting, ventilation systems, lighting conditions, air conditioning systems, factory conditions, production line conditions and many more. All the results can be stored on the unit and downloaded to PC via the SensorLink PRO software which is included with the unit. For full data traceability, the MI 6401 Euro set includes a full ISO accredited calibration certicate. KEY FEATURES: Adaptable: using various standard and optional probes, the MI6401 can be adapted to measure and calculate a combination of up to 16 different environments conditions (maximum 11 at the same time). Long lasting: record up to 160 days worth of data. Accommodating: can be used for spot checking different locations or performing long investigations in a specific location. Easy to use: plug in the suitable probes and the device will automatically adjust for appropriate measurements. PPD and PMV calculations: predicted Percentage of Dissatisfied people (PPD) and Predicted Mean Vote (PMV) calculations performed automatically. Note: requires A 1131 black globe. Downloadable: up to 4000 test results can be stored in a two level memory structure. STANDARDS: EN 61010-1 Safety EN 61326 EMC DIN 5032 P1 Photometry; methods of measurement DIN 5032 P2 Photometry; Operation of electric lamps and measurement of the respective quantities DIN 5032 P3 Photometry; Terms of measurement on gas luminaires DIN 5032 P4 Photometry; Measurement of luminaires DIN 5032 P6 Photometry; Photometers; Concepts, characteristics and their designation DIN 5032 P7 Photometry; Classication of illuminance meters and luminance meters EN 60751 Industrial platinum resistance thermometer sensors EN 60584-1 Thermocouples - part 1: reference tables (IEC 60584-1:1995); EN 12599 Ventilation for buildings Test procedures and measuring methods for handling over installed ventilation and air conditioning systems EN ISO 7726 Ergonomic of thermal environment - Instruments for measuring physical quantities ISO 10526 CIE STANDARD colorimetric illuminants ISO 10527 CIE STANDARD colorimetric observers
flow m/s
AIR
CO/ CO2
RH
%
PMV PPD
REC
. 10

MI 6401 SPECIFICATION (FOR THE STANDARD SET) Illuminance (A1092 type B probe) Illuminance range 0.01 lux to 19.99 lux 20.0 lux to 20000 lux MICROCLIMATE PROBE (A 1091) Air temperature range Air temperature accuracy Relative humidity range Relative humidity accuracy (10 % - 90 %RH) Dew point calculation AIR VELOCITY Air velocity range Air velocity accuracy (0.10 m/s to 9.99 m/s) Air velocity accuracy (10.0 m/s to 20.0 m/s) EXTRAS Globe Temperature (WBGT) Index Natural Wet Bulb Temp Black Globe Radiant Temperature PMV and PPD measurement Luminance Contrast CO concentration CO2 concentration Standard K type thermocouple range DOWNLOADING Memory Downloading methods Software included GENERAL DATA Size (mm) Weight Power supply Internal charging circuitry

0.01 lux to 20000 lux 0.02 lux + 8 % 8% -20 C to 60 C 0.2 C at 25 C (0.5 C over working range) 0.0 % to 100.0 % 2 % 0.10 m/s to 20.0 m/s (0.05 m/s + 5 %) 5 %
Description
MI 6401ST Poly STANDARD (ST) KIT INCLUDES: Part No.

MI 6401 A 1144 A 1091 A 1092 A 1133 83004993 A 1135 A 1147
Description
Poly Probe adapter Microclimatic probe Illuminance probe type B Carrying case USB cable Power supply adapter/charger 6 NiMH batteries SensorLink PRO software Tripod adapter Instruction manual Calibration certicate
requires A 1131 black globe
requires A 1132 Luminance probe requires A 1181 CO probe requires A 1180 CO2 probe requires A 1128 probe up to 4000 locations USB 110 x 85 x 220 0.5 kg 6 x AA (rechargable) or mains
MI 6401EU Poly EURO (EU) KIT INCLUDES: Description

Standard kit with ISO calibration certicate for complete system instead of Calibration certicate.
KEY FEATURES
Detailed CO and CO2 measurment.
. 11
Indoor Environment Quality Accessory selection guide

MI 6201 MI 6301 Product group
Photo
Fast 6 cell AA Charger with a set of 6 pcs NiMH batteries
Part No.
Battery charger for 6 rechargeable batteries size AA. Probe simultaneously measures relative air humidity (via electric capacitor) and air temperature (via Pt 1000 thermocouple). Thermocouple probe K type servers for surface temperature measurements. Extension rod will help you reach measuring spots in ventilation ducts or remote places. Black globe thermometer serves for assessment of ambient temperature i.e. temperature comfort. Luminance probe measures cd/m2 i.e. from the surface reected light.
A 1160
Probes
Humidity and air temperature probe
A 1127
Probes
Thermocouple probe K wire
A 1128
Probes
Telescopic rod with 2.5 m cable
A 1130
Probes
Black globe termometer
A 1131
Probes
Luminance probe
A 1132
Probes
CO2 probe
A 1180
Probe measures concentration of CO2 in the ambient air. Probe measures concentration of CO in exhausts of various combustion processes. Sound calibrator Class 1 is a tool for periodical calibration of the instrument. Sound calibrator Class 2 is a tool for periodical calibration of the instrument. Tripod serves for xing the instrument for longterm measurements. This tripod will t both, the instrument and black globe thermometer. SoundLink PRO is Windows compatible PC Software for detailed analysis of sound records including frequency analysis. Extension cable ts both, luminance and illuminance probe and serves for measurements on remote spots.
Probes
CO probe
A 1181
Calibrators
Sound calibrator Class 1
A 1152
Calibrators
Sound calibrator Class 2
A 1165
Other
Tripod
A 1159
Other
Tripod holder for instrument and black globe
A 1161
Software, Books, publications
PC SW SoundLink PRO
A 1162
Test leads, cables, probes Extension cable (only for lumiand crocodile nance and illuminance probe) clips
A 1145
. 12
MI 6401

Digital Multimeters / Clamp Meters / Voltage and Continuity Testers
Glossary - Digital Multimeters / Clamp Meters / Voltage and Continuity Tester 7 Selection Guide for Digital Multimeters 7 MD 9010 Pocket-sized Digital Multimeter 7 MD 9015 Pocket-sized Multimeter with temperature measurement 7 MD 9020 General purpose Digital Multimeter 7 MD 9030 TRMS General purpose Digital Multimeter 7 MD 9040 TRMS Industrial Digital Multimeter 7 MD 9050 TRMS Heavy Duty Industrial Digital Multimeter 7 Selection Guide for Clamp Meters 7 MD 9210 Mini Clamp Meter 7 MD 9220 High current Clamp Meter 7 MD 9230 AC & DC current Clamp Meter 7 MD 9240 Power Clamp Meter 7 MD 9270 Leakage Clamp Meter with Power Functions 7 Selection Guide for Voltage and Continuity Tester 7 MD 1000 LED Voltage detector 7 MD 1100 Voltage detector with LCD display 7 ACCESSORIES 7
- - - - - - - - - - - - - - - - - -
02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
TECHNICAL CATALOGUE
2010
Labratory and Field Testing Equipment for Electrical and Electronic Parameters
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers Glossary - Multimeters

RMS Root Mean Square. When an AC supply is placed onto a circuit, it produces heat. The RMS value is the equivalent DC supply that would produce the same amount of thermal heat as the actual AC supply. True RMS A specic method of measuring the RMS value of a signal. With inductive and capacitive systems distorting the sinusoidal wave of the mains supply, this method provides the most accurate RMS value regardless of the shape of the waveform. Other methods of measuring rms values exist, such as the rectier or mean absolute deviation method; however, these methods are accurate only for sine wave signals. Crest factor The crest factor describes the ratio of the peak value to the RMS value of an electrica variable (AC voltage and AC current). High crest factors cause distortion reactive power and harmonics in the supply network, and so are undesirable. With high crest factors, electronic instruments often display inexact values. This must be considered when selecting an instrument. For example, if an instrument measures 20 A AC current, the peak value is around 28 A with a sinusoidal waveform. So the instrument must be able to handle much higher peak currents than the RMS value. Number of Counts The number of divisions into which a given measurement range is divided. This can be used to evaluate the resolution of an instrument Accuracy A value to show how accurately an instrument can read a specic value. This is usually written as a percentage (e.g. 5 V 5 %) Resolution The smallest possible change in a signal that would produce a change in the value on the screen of the test instrument Overvoltage category CAT the overvoltage category species the highest mains voltage (or lightning strike, short circuit due to incorrect use; etc.) that the instrument can withstand without danger for the tester or for the object being measured. The standard species four overvoltage categories. The overvoltage category affects component sizing via the air gap. The higher the category, the bigger is the distance to the power source. CAT I Electronic devices, signal level, CAT II Domestic appliances, portable appliances, single-phase loads, sockets, (>10 m from CATIII; >20 m from CAT IV), CAT III Three-phase distribution systems, lighting systems in large buildings, distribution panels, CAT IV Three-phase systems on power stations, electricity meters, outdoor installations and supply cable incoming feed Digital Multimeters/Clamps metres/Voltage testers
TRMS
True RMS measurement
EF
Non contact voltage detection
Autocheck
Automatic V / measurement
Temperature measurement
PC Link
Jaw 28 mm
Jaw size
Power
Power measurement
THD
THD measurement
Harm
50th
Harmonic analysis
YE
RRAN
ARS
TY
Phase rotation indication
CAT IV 1000 V
Safety category
RCD
RCD trip-out test
.
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers Selection Guide for Multimeters
Part No.:
MD 9010 Multimeter
MD 9015 Multimeter
MD 9020 Multimeter
MD 9030 Multimeter
MD 9040 Multimeter
MD 9050 Multimeter
True RMS DC current range (A) Basic accuracy (%) Maximum resolution (A) AC current range (A) Basic accuracy (%) Maximum resolution (A) DC voltage range (V) Basic accuracy (%) Maximum resolution (V) AC voltage range (V) Basic accuracy (%) Maximum resolution (V) Resistance measurement (M) Basic accuracy (%) Maximum resolution (m) Acoustic continuity test Diode test Capacitance Frequency measurement Frequency of digital signals Temperature measurement (Type K sensor) Autocheck V / nS (conductance) Count Backlight Analogue bar-graph IR, RS232 interface Automatic and manual range selection Automatic switch off Non-contact eletrical eld detection (EF) MAX hold Peak hold Data hold Recording (MAX / MIN / AVG) Relative value Compensation for test leads Overvoltage category Size with holster (mm) Weight with holster (g) CE mark
0.002 1.2 0.1 0.002 1.5 0.1 600 0.5 1000 600 1.5 1000 6 1 100
10 0.8 0.1 10 1 0.1 1000 0.3 100 750 1 100 25 0.4 100 T1
10 1.2 0.1 10 1.5 0.1 1000 0.3 100 1000 1.5 100 40 0.6 100 T1
10 1.2 0.1 10 1.5 0.1 1000 0.3 100 1000 1.5 100 40 0.6 100 T1
10 0.2 0.1 10 0.6 0.1 1000 0.06 10 1000 0.5 10 60 0.1 100
(temperature comparison)
10 0.2 0.1 10 0.6 0.1 1000 0.06 10 1000 0.5 10 60 0.1 100 T1 & T2
6000 2500 4000 4000 CAT III/300 V, CAT II/600 V 113 x 53 x 10.2 78 CAT IV/300 V, CAT III/600 V, CAT II/1000 V 160 x 82 x 48 345 CAT IV/300 V, CAT III/600 V, CAT II/1000 V 198 x 97 x 55 396 CAT III/600 V, CAT II/1000 V 198 x 97 x 55 396 CAT IV/1000 V 208 x 103 x 64.5 635
9999 (AC/DCV, Hz, nS) 9999 (AC/DCV, Hz, nS) 6000 (mV, /m/A, , F) 6000 (mV, /m/A, , F) 41 segment 41 segment CAT IV/1000 V 208 x 103 x 64.5 635
. 3
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9010 Pocket-sized digital multimeter
YE
ARS
RRAN
CAT III 300 V
TY
EF
Autocheck
The MD 9010 is one of the smallest and lightest of our digital multimeters. The MD9010 unit can be used for a wide variety of applications. The high accuracy, large LCD display and features (including non-contact voltage detection and an auto-check function) make the unit extremely versatile and great value for money. KEY FEATURES: Autocheck function: automatic detection of AC voltage, DC Voltage or resistance. Pocketsized: small, thin, ergonomic design. Lightweight: only 78 g. EF Detection: non contact voltage detection. Safety: protected against wrong connection and overvoltage CAT III/300 V and CAT II/600 V. Multifunctional: ideal for basic electronic and electrical testing. Easy to read: LCD display, 3-5/6 digit, 6000 counts. APPLICATION: Low level electrical testing. Low level electronic fault nding. Basic eld servicing. Hobby work. ORDERING INFORMATION: Part No. MD 9010 Description Multimeter
FUNCTION DC voltage AC voltage, 50Hz - 60Hz DC current AC current Diode test Resistance Frequency Capacitance Power supply Overvoltage category RANGE 6.000 V - 600.0 V 6.000 V - 600.0 V 400.0 A - 2000 A 400.0 A - 2000 A ACCURACY from (0.5 % of reading + 3 digits) to (2.0 % of reading + 5 digits) (1.5 % of reading + 5 digits) from (1.2 % of reading + 3 digits) to (1.5 % of reading + 3 digits) from (1.5 % of reading + 3 digits) to (2.0 % of reading + 3 digits)
.

MD 9010
Description
Multimeter with rubber holster 2 test leads Battery Instruction manual Warranty
Open-circuit voltage <1.6 V DC from (1.0 % of reading + 4 digits) 600.0 - 6.000 M to (2 % of reading + 6 digits) 10.00 Hz - 30.00 kHz (0.5 % of reading + 4 digits) 100.0 nF - 2000 F 3 V battery, IEC-CR2032 CAT III/300 V and CAT II/600 V (3.5 % of reading + 6 digits)
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9015 Pocket-sized multimeter with temperature measurement
YE
RRAN
ARS
CAT III 600 V
TY
EF
The digital multimeter MD 9015 includes all the functions required to detect and diagnose most electrical and electro-technical problems. Offering one-handed operation and a display with large, easily-read figures, this compact instrument offers a high level of functionality while still maintaining its small size and portability. KEY FEATURES: Temperature: measures temperature in Celsius up to 300 C and Fahrenheit up to 572 F. High Accuracy: 0.3 % basic accuracy. EF Detection: non contact voltage detection. REL function: relative function for comparing the difference between signals. PC Link: unit results can be linked onto a computer via the optional software. Safety: CAT II/1000 V, CAT III/600 V protection. APPLICATION: HVAC. Low level electrical testing. Low level electronic fault nding. Basic eld servicing. Hobby work. ORDERING INFORMATION:
FUNCTION DC voltage AC voltage, 50 Hz - 500 Hz DC current AC current Diode test Resistance Temperature Frequency Capacitance Power supply Overvoltage category RANGE 250.0 mV - 1000 V 250.0 mV - 750 V 250.0 A - 10.00 A 250.0 A - 10.00 A ACCURACY from (0.3 % of reading + 4 digits) to (1.0 % of reading + 4 digits) from (1 % of reading + 3 digits) to (2.2 % of reading + 6 digits) from (0.8 % of reading + 3 digits) to (2.0 % of reading + 6 digits) from (1.0 % of reading + 4 digits) to (2.5 % of reading + 5 digits) from (0.4 % of reading + 2 digits) to (1.0 % of reading + 4 digits) 3 C + 3 digits (0.05 % of reading + 4 digits) from (1.0 % of reading + 4 digits) to (6 % of reading + 45 digits)
Part No. MD 9015
Description Multimeter

MD 9015
Description
Multimeter with rubber holster 2 test leads Batteries Instruction manual Warranty
Open-circuit voltage <1.8 V DC, Test current 1 mA 250.0 - 25.00 M -20 C - 300 C 30 Hz - 200 Hz 2.500 nF - 25.00 F
2 x 1.5 V AAA size batteries CAT IV/300 V, CAT III/600 V, CAT II/1000 V
.
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9020 General purpose Digital Multimeter
YE
ARS
RRAN
CAT III 600 V
TY
The MD 9020 is a high-quality digital multimeter, designed for everyday use in the laboratory and for maintenance and repair in the field and also in the industrial sector. KEY FEATURES: Hz measurement: frequency measurement up to 1 MHz. Lead alert: incorrect lead connection alert. Capacitance measurement: up to 3 mF. Temperature measurement: up to 300 C and Fahrenheit up to 572 F. Hold Functions: MAX hold and data hold. Safety: CAT II/1000 V, CAT III/600 V protection. APPLICATION: Mid level electrical testing. Mid level electronic fault nding. Field servicing. General purpose.
FUNCTION DC voltage AC voltage 50 Hz - 500 Hz DC current AC current Diode test Resistance Temperature Frequency Capacitance Power supply Overvoltage category
.
ORDERING INFORMATION: Part No. MD 9020

RANGE 400.0 mV - 1000 V 400.0 mV - 1000 V 400.0 A - 10.00 A 400.0 A - 10.00 A ACCURACY from (0.3 % of reading + 4 digits) to (1.0 % of reading + 4 digits) from (1.5 % of reading + 5 digits) to (4.0 % of reading + 5 digits) from (1.2 % of reading + 3 digits) to (2.0 % of reading + 5 digits) from (1.5 % of reading + 4 digits) to (2.0 % of reading + 6 digits) from (0.6 % of reading + 4 digits) to (2.0 % of reading + 4 digits) (2 % of reading + 3 C) (0.5 % of reading + 4 digits) (3.5 % of reading + 6 digits)

MD 9020
Description
Open-circuit voltage <1.6 V DC, Test current 0.25 mA 400.0 - 40.00 M -20 C - 300 C 50.00 Hz - 1.000 MHz 500.0 nF - 3000 F
2 x 1.5 V AAA size batteries CAT IV/300 V, CAT III/600 V , CAT II/1000 V
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9030 TRMS General purpose Digital Multimeter
YE
RRAN
ARS
CAT III 600 V
TY
TRMS
The MD 9030 TRMS digital multimeter has been designed for use both in the laboratory and in the harsh industrial maintenance and repair sector. The TRMS functionality makes the unit suitable for a multitude of situations, while the large, bright, backlight screen and incorrect lead connection alert make it ideal for working in dark areas. KEY FEATURES: TRMS: accurate readings on sinusoidal and non-sinusoidal signals. Hz measurement: frequency measurement up to 1 MHz. Lead alert: incorrect lead connection alert. Capacitance measurement: up to 3 mF. Temperature measurement: up to 300 C and Fahrenheit up to 572 F. Hold Functions: MAX hold and data hold. Safety: CAT II/1000 V, CAT III/600 V protection. Backlight: large, bright 3-3/4 digit, 4000 count LCD display with backlight for working in dark conditions. APPLICATION: Mid level electrical testing. Mid level electronic fault nding. Field servicing. General purpose. ORDERING INFORMATION:
FUNCTION DC voltage TRMS AC voltage 50 Hz - 500 Hz DC current TRMS AC current Diode test Resistance Temperature Frequency Capacitance Power supply Overvoltage category
Part No. MD 9030
RANGE 400.0 mV - 1000 V 400.0 mV - 1000 V 400.0 A - 10.00 A 400.0 A - 10.00 A
ACCURACY from (0.3 % of reading + 4 digits) to (1.0 % of reading + 4 digits) from (1.5 % of reading + 5 digits) to (4.0 % of reading + 5 digits) from (1.2 % of reading + 3 digits) to (2.0 % of reading + 5 digits) from (1.5 % of reading + 4 digits) to (2.0 % of reading + 6 digits) from (0.6 % of reading + 4 digits) to (2.0 % of reading + 4 digits) (2 % of reading + 3 C) (0.5 % of reading + 4 digits) (3.5 % of reading + 6 digits)

MD 9030
Description
Open-circuit voltage <1.6 V DC, Test current 0.25 mA 400.0 - 40.00 M -20 C - 300 C 50.00 Hz - 1.000 MHz 500.0 nF - 3000 F
2 x 1.5 V AAA size batteries CAT III/600 V , CAT II/1000 V
.
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9040 TRMS Industrial Digital Multimeter
YE
ARS
RRAN
CAT IV 1000 V
TY
TRMS
CAT IV/1000 V overvoltage category and TRMS measurement of AC current and voltage are key features of the MD 9040. Thats why it is particularly suitable for performing measurements on power supply sources in the most demanding applications in the industrial sector. Its high accuracy, 2-line LCD display of readings, diverse measurement functions, fast one-handed operation and outstanding value for money open up a wide range of possible uses. KEY FEATURES: TRMS: accurate readings on sinusoidal and non-sinusoidal signals. High accuracy: basic accuracy of 0.1 %. Lead alert: incorrect lead connection alert. PC Link: unit results can be linked onto a computer via the optional software. Capacitance measurement: up to 25 mF. Frequency measurement: up to 1 MHz. Safety: CAT IV/1000 V. Backlight: 2-line LCD display with backlight, 9999 count (ACV, DCV, Hz, nS), 6000 count (mV, A, mA, A, , F).
FUNCTION TRMS AC voltage 40 Hz - 20 kHz DC voltage DC current TRMS AC current 40 Hz - 1 kHz Diode test Resistance Mains frequency RANGE 60.00 mV - 999.9 V 60.00 mV - 999.9 V 600.0 A - 10.00 A 600.0 A - 10.00 A 2.000 V 600.0 - 60.00 M 15.00 Hz - 50.00 kHz ACCURACY from (0.5 % of reading + 3 digits) to (3.0 % of reading + 4 digits) from (0.06 % of reading + 2 digits) to (0.12 % of reading + 2 digits) (0.2 % of reading + 4 digits) from (0.6 % of reading + 3 digits) to (1.0 % of reading + 4 digits) (1.0 % of reading + 1 digit) from (0.1 % of reading + 3 digits) to (1.5 % of reading + 5 digits) (0.04 % of reading + 4 digits) (0.004 % of reading + 4 digits) from (0.8 % of reading + 3 digits) to (6.5 % of reading + 5 digits)
Frequency of digital equipment 5.00 Hz - 1.000 MHz Capacitance Power supply Overvoltage category 60.00 nF - 25.00 mF
.
APPLICATION: High level industrial testing. High level electronic fault nding. Field servicing. Heavy duty electrical testing.
ORDERING INFORMATION: Part No. MD 9040 Description Multimeter
Open-circuit voltage <3.5 V DC, Test current 0.4 mA

MD 9040
Description
Multimeter with rubber holster 2 test leads Battery Instruction manual Warranty
9 V battery, NEDA1604G, JIS006P, or IEC6F22 CAT IV/1000 V
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9050 TRMS Heavy Duty Industrial Digital Multimeter
YE
RRAN
ARS
CAT IV 1000 V
TY
TRMS
Autocheck
The MD 9050 ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisition and transfer (via optical interface), CAT IV/1000 V, TRMS current and voltage measurement, non-contact voltage detector, conductance measurement, auto check and fast one-handed operation are highlights of the multimeter. The MD 9050 is the ideal choice for demanding measurement tasks in industry, in the laboratory, and in everyday repair and maintenance practice. KEY FEATURES: TRMS: accurate readings on sinusoidal and non-sinusoidal signals. High accuracy: basic accuracy of 0.1%. Temperature measurement: T1, T2 and T1 + T2 measurement. Lead alert: incorrect lead connection alert. Conductance: conductance measurement (100 nS). PC Link: unit results can be linked onto a computer via the optional software. Autocheck function: automatic detection of AC voltage, DC Voltage or resistance. Recording: data recording facility. Safety: CAT IV (1000V). Backlight: 2-line LCD display with backlight, 9999 count (ACV, DCV, Hz, nS), 6000 count (mV, A, mA, A, , F). APPLICATION: High level industrial testing. High level electronic fault nding. Field servicing. Heavy duty electrical testing. ORDERING INFORMATION: Part No. MD 9050 Description Multimeter
FUNCTION TRMS AC and AC+DC voltage 40 Hz - 20 kHz Auto-check (ACV) DC voltage Auto-check (DCV) DC current TRMS AC and AC+DC current 40 Hz - 1 kHz Diode test Resistance Conductance Auto-check Mains frequency Frequency of digital equipment Capacitance Temperature Power supply Overvoltage category ACCURACY from (0.5 % of reading + 3 digits) 60.00 mV - 999.9 V to (3.0 % of reading + 4 digits) 9.999 V - 999.9 V (1.0 % of reading + 4 digits) from (0.06 % of reading + 2 digits) 60.00 mV - 999.9 V to (0.12 % of reading + 2 digits) 9.999 V - 999.9 V (0.5 % of reading + 3 digits) 600.0 A - 10.00 A (0.2 % of reading + 4 digits) from (0.6 % of reading + 3 digits) 600.0 A - 10.00 A to (1.0 % of reading + 4 digits) 2.000 V (1.0 % of reading + 1 digit) Open-circuit voltage <3.5 V DC, test current 0.4 mA from (0.1 % of reading + 3 digits) 600.0 - 60.00 M to (1.5 % of reading + 5 digits) 99.99 nS (0.8 % of reading + 10 digits) from (0,5 % of reading + 4 digits) 600.0 - 60.00 M to (2 % of reading + 5 digits) 15.00 Hz - 50.00 kHz (0.04 % of reading + 4 digits) 5.00 Hz - 1.000 MHz (0.004 % of reading + 4 digits) from (0.8 % of reading + 3 digits) 60.00 nF - 25.00 mF to (6.5 % of reading + 5 digits) -50 C - +1000 C (0.3 % of reading +2 C ) 9 V battery, NEDA1604G, JIS006P, or IEC6F22 CAT IV/1000 V RANGE

MD 9050
Description
Multimeter with rubber holster 2 test leads Type K sensor Battery Instruction manual Warranty
.
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers Selection Guide for Clamp meters
Part No.:
MD 9210 Clamp meter
MD 9220 Clamp meter
MD 9230 Clamp meter
MD 9240 Clamp meter
MD 9270 Clamp meter
True RMS DC current range (A) Basic accuracy (%) AC current range (A) Basic accuracy (%) DC voltage range (V) Basic accuracy (%) AC voltage (V) Basic accuracy (%) Resistance range Basic accuracy (%) Acoustic continuity test Diode test Capacitance Frequency measurement Temperature measurement (Type K sensor) Autocheck V- Power measurement (W, VA & VAR) Count Backlight COM port (data transfer) Automatic and manual range selection Automatic switch off Non-contact electrical eld detection (EF) MAX hold Peak value Data hold Relative value Jaw opening Overvoltage category Size (mm) Weight CE mark
600 A 1.5 600 V 0.3 600 V 1.5 40.00 M 0.6
2000 A 1.5 600 V 0.5 600 V 1.5 6.000 M 1
1000 A 1.5 800 A 1.5 600 V 0.3 600 V 1 40.00 M 0.6
1000 A 1 600 V 0.5 600 V 0.5 999.9 1
150 A 0.8
250 V, 600 V 0.5
4000 6000 4000 45 mm CAT IV/300 V, CAT III/600 V 224 x 78 x 40 220 g 50 mm CAT IV/300 V, CAT III/600 V 227 x 78 x 40 290 g
Auto V-A Single-phase 4000, 6000, 9999
3000
26 mm CAT IV/300 V, CAT III/600 V 190 x 63 x 32 139 g
. 10
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9210 Mini clamp meter
YE
ARS
RRAN
CAT III 600 V
TY
Jaw 26 mm
Versatility, sturdy case, high accuracy and lots of measurement functions are key features of the current clamp MD 9210. If youre looking for a universal current clamp offering good value for money, look no further! KEY FEATURES: Jaw size: 26 mm. Lightweight: only 139 g. High specication: reads up to 600 A with excellent accuracy. Multifunctional: measures AC current, AC and DC voltage, Resistance, Frequency, Capacitance, Diode test. REL function: helps to compare the difference between two signals or remove background noise for accurate measurement. Hold functions: max hold and data hold functions. APPLICATION: Working in Small enclosures. General purpose. Testing 3-phase machinery.
FUNCTION RANGE ACCURACY
DC voltage
AC voltage, 50 Hz - 500 Hz AC current measurement, 50,60 Hz
Resistance measurement
Diode test Frequency Capacitance Power supply Overvoltage category
ORDERING INFORMATION: Part No. MD 9210 Description Current clamp

MD 9210
400.0 mV 4.000 V, 40.00 V, 400.0 V 600 V 4.000 V, 40.00 V, 400.0 V 600 V 40.00 A, 400.0 A, 600 A 400.0 4.000 k, 40.00 k, 400.0 k 4.000 M 40.00 M 10 Hz - 100 kHz 500.0 nF - 3000 F 3 V battery, IEC-CR2032
(0.3 % of reading + 4 digits) (0.5 % of reading + 3 digits) (1.0 % of reading + 4 digits) (1.5 % of reading + 5 digits) (2.0 % of reading + 5 digits) (1.5 % of reading + 8 digits) (0.8 % of reading + 8 digits) (0.6 % of reading + 4 digits) (1.0 % of reading + 4 digits) (2.0 % of reading + 4 digits) (0.5 % of reading + 4 digits) (3.5 % of reading + 6 digits)
Description
Current clamp 2 test leads Battery Pouch Instruction manual Warranty
Open-circuit voltage <1.6 V DC, test current 0.25 mA
CAT IV/300 V, CAT III/600 V
. 11
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9220 High current clamp meter
YE
ARS
RRAN
CAT III 600 V
TY
TRMS
EF
Autocheck
Jaw 45 mm
The MD 9220 is a high-quality digital multimeter, designed for everyday use in the laboratory and for maintenance and repair in the field and also in the industrial sector. KEY FEATURES: TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. Jaw size: 45 mm. High current: measures up to 2000 A. EF detector: non contact voltage detector. Multifunctional: measures AC current, AC and DC voltage, Resistance, Frequency, Capacitance, Diode test. Display: easy to read backlight LCD screen, 3-5/6 digit, 6000 count. Data Hold function. APPLICATION: High powered 3-phase machinery. High level industrial. High current electrical.
FUNCTION DC voltage AC voltage measurement, 50,60 Hz AC voltage measurement , 50 - 500 Hz AC current measurement, 50,60 Hz Resistance measurement Continuity test Diode test Frequency Capacitance Power supply Overvoltage category RANGE 6.000 V 60.00 V 600.0 V 6.000 V, 60.00 V, 600.0 V 6.000 V, 60.00 V, 600.0 V 400.0 A, 2000 A ACCURACY (0.5 % of reading + 3 digits) (1.0 % of reading + 5 digits) (2.0 % of reading + 5 digits) from (1.5 % of reading + 5 digits) to (2.0 % of reading + 5 digits) from (2 % of reading + 5 digits) to (2.5 % of reading + 5 digits) (1.5 % of reading + 5 digits)
. 12

MD 9220
Description
Current clamp 2 test leads Batteries Pouch Instruction manual Warranty
6.000 k (1.2 % of reading + 6 digits) 60.00 k, 600.0 k (1.0 % of reading + 4 digits) 6.000 M (2.0 % of reading + 4 digits) 600.0 (2.0 % of reading + 8 digits) Open-circuit voltage <1.6 V DC, test current 0.4 mA 10 Hz - 30 kHz (0.5% of reading + 4 digits) 100,0 nF - 2000 F (3.5% of reading + 5 digits) 2 x 1.5 V AAA size batteries CAT IV/300 V, CAT III/600 V
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9230 AC & DC current clamp meter
YE
ARS
RRAN
CAT III 600 V
TY
TRMS
Jaw 50 mm
The MD 9230 is a universal current clamp for measuring DC and TRMS AC voltages up to 600 V and DC and TRMS AC currents up to 1000 A. With a broad spectrum of measurement functions and features, it is an ideal tool for service companies and works electricians in the industrial sector. KEY FEATURES: TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. Jaw size: 50 mm. High current: measures up to 800 A AC and 1000 A DC. REL function: helps to compare the difference between two signals or remove background noise for accurate measurement. Multifunctional: measures AC and DC current, AC and DC voltage, Resistance, Frequency, Capacitance, Diode test. Display: easy to read backlight LCD screen, 3-3/4 digit, 4000 count. Hold functions: MAX hold and data hold functions. APPLICATION: Off grid solar and wind power systems. UPS systems. Utility scale battery systems. High level industrial. High current electrical. ORDERING INFORMATION: Part No. MD 9230 Description Current clamp
FUNCTION DC voltage AC voltage 50 Hz - 500 Hz 50 Hz, 60 Hz 60 Hz - 500 Hz 50 Hz - 500 Hz DC current measurement AC current measurement 15 Hz - 1 kHz Resistance measurement Continuity test Diode test Capacitance Power supply Overvoltage category RANGE 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600.0 V 400.0 mV 4.000 V, 40.00 V, 400.0 V 4.000 V, 40.00 V, 400.0 V 600 V 400.0 A, 1000 A ACCURACY (0.3 % of reading + 3 digits) (0.5 % of reading + 3 digits) (1.0 % of reading + 4 digits)

MD 9230
Description
(4.0 % of reading + 4 digits) (1.0 % of reading + 4 digits) (1.5 % of reading + 4 digits) (2.0 % of reading + 4 digits) from (1.5 % of reading + 4 digits) to (5 % of reading + 30 digits) from (1.5 % of reading + 4 digits) 400 A, 800 A to (5% of reading + 30 digits) 400.0 , 4.000 k, 40.00 k, from (0.6 % of reading + 4 digits) 400.0 k, 4.000 M, 40.00 M to (2 % of reading + 4 digits) 400.0 (1.5 % of reading + 6 digits) Open-circuit voltage <1.6 V DC, test current 0.4 mA 500 nF - 3000 F (3.5 % of reading + 6 digits) 2 x 1.5 V AAA size batteries CAT IV/300 V, CAT III/600 V
. 13
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9240 Power clamp meter
YE
ARS
RRAN
CAT III 600 V
TY
TRMS
Autocheck
Jaw 45 mm
Power
THD
The MD 9240 is a high-quality and extremely easy to handle power clamp meter. The current clamp enables TRMS AC current measurement up to 1000 A, single-phase power analysis, AC and DC voltage measurement, temperature measurement and more. As a result, the current clamp is suitable for maintenance and checking of distribution systems, switchboards and motors, or in systems where the supply network is heavily contaminated with harmonics. KEY FEATURES: TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. Jaw size: 45 mm. High current: up to 1000 A AC. Power: measures various power signals (W, VA, PF or THD). Temperature: measures temperature up to 300 C. PC Link: unit results can be linked onto a computer via the optional software. Peak hold: peak hold function for monitoring starting motors. APPLICATION: System maintenance. Power system checking. High level Industrial. High level Electrical. ORDERING INFORMATION: Part No. Description Current clamp
FUNCTION DC voltage AC voltage ,50 Hz - 60 Hz, 45 Hz - 500 Hz - 3.1 kHz AC current measurement 50 Hz - 60 Hz 45 Hz - 500 Hz 500 Hz - 3.1 kHz Temperature Resistance measurement Continuity test Frequency Power factor (PF) RANGE 600.0 V 600.0 V 40.00 A, 400.0 A, 1000 A 40.00 A, 400.0 A, 1000 A 40.00 A, 400.0 A, 1000 A -50 C - 300 C 999.9 10 - 300 5.00 Hz - 500.0 Hz 0.10 - 0.99 ACCURACY (0.5 % of reading + 5 digits) (0.5 % of reading + 5 digits), (1.5 % + 5 digits), (2.5 % + 5 digits) (1.0 % of reading + 5 digits) (2.0 % of reading + 5 digits) (2.5 % of reading + 5 digits) (2.5 % of reading + 5 digits) (3 % of reading + 5 digits) (2 % of reading + 3 C) (1 % of reading + 6 digits)
(0.5 % of reading + 4 digits) (3 digits), H from 1. to 21. (5 digits), H from 22. to 51. (2 % of reading + 6 digits), H 1./10. Apparent power 0 - 600.0 kVA (3.5 % of reading + 6 digits), H 11./46. (5.5 % of reading + 6 digits), H 47./51. Active power, reactive power 0 - 600.0 kW, kVar from (2.0 % of reading + 6 digits) Power supply 2 x 1.5 V AAA size batteries Overvoltage category CAT IV/300 V, CAT III/600 V
. 14
MD 9240

MD 9240
Description
Current clamp 2 test leads Type K sensor Batteries Pouch Instruction manual Warranty
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 9270 Leakage Clamp meter with Power Functions
YE
RRAN
ARS
CAT III 600 V
TY
TRMS
Jaw 31 mm
Power
THD
Harm
50th
The MD 9070 is an amazingly unique earth leakage clamp meter. Not only does it have the ability to accurately read the TRMS AC leakage current of a system, it can detect losses in the system and suggest possible reasons for the loss. The voltage, power, harmonic, power factor (PF), total harmonic distortion (THD) and crest factor measurements make this instrument suitable for any electrician and engineer. KEY FEATURES: TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. Shielded Jaw: shielded jaw allows the unit to be used in the noisiest environments while the 31 mm opening makes it adaptable to most situations. Accurate: AC current read to an accuracy of 0.8 % with a base resolution of 0.01 mA and voltage to an accuracy of 0.5 % with a base resolution of 0.1 V. Intelligent: complex algorithms detect loss and provide possible reasons for loss. Versatile: measures, AC voltage, current. Harmonics: hold values and scroll through either currents or voltages up to the 50th Harmonic. THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF). Protected: CAT III/600 V safety protection. APPLICATION:
FUNCTION AC current measurement AC voltage THD Crest Factor Peak Values Power factor (PF) Phase Apparent power Active power Reactive power Jaw size Power supply Overvoltage category RANGE 40.00 mA, 400.0 mA, 4000 mA 40.00 A 150.0 A 250.0 V, 600.0 V 0 - 99.9 % 100 - 999 % 1.00 - 2.99 3.00 - 9.99 0 - 150.0 A 0 - 600.0 V 0.00 - 1.00 -180.0 to +180.0 0 - 9999 VA 10 kVA - 999.9 kVA 0 - 9999 W 10 kW - 999.9 kW 0 - 9999 VAr 10 kVAr - 999.9 kVAr 31 mm 2 x 1.5 V AAA size batteries CAT IV/300 V, CAT III/600 V ACCURACY (0.8 % of reading + 3 digits) (1.0 % of reading + 3 digits) (2.0 % of reading + 5 digits) (0.5 % of reading + 2 digits) (2 % of reading + 3 digits) (2 % of reading + 3 digits) (2 % of reading + 2 digits) (3 % of reading + 5 digits) (3 % of reading + 3 digits) (3 % of reading + 3 digits) (1 % of reading + 0.01) (1 % of reading + 0.4 digits) from (1 % + 0.03 d) to (1 % + 3 d) from (2 % + 0.03 d) to (2 % + 0.3 d) from (1 % + 0.03 d) to (1 % + 3 d) from (2 % + 0.03 d) to (2 % + 0.3) from (1 % + 0.03 d) to (1 % + 3 d) from (2 % + 0.03 d) to (2 % + 0.3 d)
Load and leakage measurement. System maintenance. Power system checking. RCD fault nding. Process Engineering.

MD 9270
Description
. 15
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers Selection Guide for Voltage detectors
Part No.:
MD 1000 Voltage detectors
MD 1100 Voltage detectors
AC, DC VOLTAGE Range Basic accuracy (%) Operating time Reaction time Frequency range CONTINUITY AND DIODE TEST Display Resistance range Test current RCD TRIP TEST RCD check PHASE TEST Phase test Phase rotation Voltage display DISPLAY Ranges EQUIPMENT SAFETY Overvoltage category Standards POWER SUPPLY
12 V - 690 V Max. 30 s <1s 0 - 400 Hz acoustic and LED display 0 - 500 k 400 A to trip 30 mA RCD, FI circuit breakers 1-phase test 2-phase phase rotation test >100 V AC LED bar display 12 V, 24 V, 48 V, 120 V, 230 V, 400 V, 690 V CAT IV/1000 V IEC, EN 61243-3, DIN VDE 0682-401, IEC 61010, GS38 2 x 1.5 V AAA (micro) size batteries
12 V - 690 V (2.0 % of reading + 4 digits) Max. 30 s <1s 0 - 400 Hz acoustic and LCD display 0 - 2 k 4 A to trip 30 mA RCD, FI circuit breakers 1-phase test 2-phase phase rotation test >100 V AC 3 digit, LCD with backlight 12 V - 690 V (2% of reading + 4D) CAT IV/1000 V IEC, EN 61243-3, DIN VDE 0682-401, IEC61010, GS38 2 x 1.5 V AAA (micro) size batteries 200 g 238 x 70 x 30
GENERAL DATA Weight Size (mm)
200 g 238 x 70 x 30
. 16
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 1000 LED Voltage detector
YE
ARS
RRAN
CAT IV 1000 V
TY
RCD
The MD 1000 is a multi-function voltage tester. Because of its broad spectrum of measurement functions, it is suitable for use both in the home and in trade and industrial sectors. KEY FEATURES: 12 V - 690 V DC and AC voltage range. Phase rotation measurement. RCD trip test (10 - 30 mA automatic internal load). Optical and acoustic continuity test. CAT IV/1000 V. APPLICATION: General purpose. Electrical testing.
FUNCTION Display Nominal voltage range Phase indication Resistance range Frequency range RCD test current Phase rotation determination Reaction time Power supply Overvoltage category RANGE 10 red LEDs for voltage, continuity, polarity and phase rotation measurement 12 V, 24 V, 48 V, 120 V, 230 V, 400 V, 690 V (automatic range selection) >100 V AC 0 - 500 k 0 - 400 Hz 30 mA 100 V - 690 V, 2-pole < 0.1 s 2 x 1.5 V AAA size batteries CAT IV/1000 V
ORDERING INFORMATION: Part No. MD 1000 Description Voltage tester

MD 1000
Description
Voltage tester 2 x 1.5 V batteries (size AAA) Captive test probe protection Plastic probe guard (in accordance with GS38) Instruction manual Warranty
. 17
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers MD 1100 Voltage detector with LCD display
YE
ARS
RRAN
CAT IV 1000 V
TY
RCD
The MD 1100 is a high-quality voltage tester designed for the most demanding duties. With a broad spectrum of measurement functions and CAT IV/1000 V overvoltage category, the device is suitable for both the industrial sector and for everyday maintenance and repair practice. KEY FEATURES: 12 V - 690 V DC and AC voltage range. Data hold function. LCD display with backlight. Phase rotation measurement. RCD trip test (10 - 30 mA automatic internal load). Optical and acoustic continuity test. Automatic switch off. CAT IV/1000V. APPLICATION: Mid level electrical testing. Mid level electronic fault nding. Field servicing. General purpose.
FUNCTION Display Nominal voltage range Phase indication Resistance range Frequency range RCD test current Phase rotation determination Reaction time Power supply Overvoltage category RANGE 3-1/2 digit LCD display with backlight 12 V - 690 V (automatic range selection) >100 V AC 0 - 2 k 0 - 400 Hz 30 mA 100 V - 690 V, 2-pole < 0.1 s 2 x 1.5 V AAA size batteries CAT IV/1000 V
. 18
ORDERING INFORMATION: Part No. MD 1100 Description Voltage tester

MD 1100
Description
Voltage tester 2 x 1.5 V batteries (size AAA) Captive test probe protection Plastic probe guard (in accordance with GS38) Instruction manual Warranty
Digital Multimeters/Clamp Meters/Voltage and Continuity Testers Accessory selection guide

Instrument Photo Product group Accessory description Part No. Application
Probes Type-K temperature probe AMD 9023 Probe for contact temperature.
Multimeters
Clamps V. T.
Other
Banana pins to Type-K socket plug adapter
AMD 9024
Adapter is needed to connect the Type K probe with a multimeter.
PC RS232 interface kit
AMD 9025
Basic downloading software supplied on a CD.
PC software with data transfer kit
AMD 9040
Data transfer set enables communication with a multimeter. Supplied on a CD along with BC-100 cable. Communication set contains USB adapter, USB and RS232 driver with belonging PC software.
PC software with USB and RS232 data transfer kit
AMD 9050
MD 9010 MD 9015 MD 9020 MD 9030 MD 9040 MD 9050 MD 9210 MD 9220 MD 9230 MD 9240 MD 1000 MD 1100

. 19
Metrel UK Unit 1, Hopton House, Ripley Drive, Normanton, West Yorkshire, WF6 1QT Tel.: 01924245000 Web: www.metrel.co.uk E-mail: infometrel.co.uk
Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.
General_TC_2010_Uk_Ver 2.0

Catalog UK

Uploaded by

Copyright:

Available Formats

Catalog UK

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog UK

Uploaded by

Copyright:

Available Formats

17th Edition Electrical Installation Testers Power Quality Analysis High Voltage Insulation Diagnostics Appliance / Machine / Switchboard

MEASURING INSTRUMENTS AND TESTERS

Instruments Designed with Future in Mind

Metrel UK Unit 1, Hopton House,

Power Quality Analysis 2.1 - 2.18

Indoor Environment Quality 6.1 - 6.12

High Voltage Diagnostics 3.1 - 3.12

Appliance / Machine / Switchboard Safety 4.1 - 4.26

Electrical Installation Testers

Compliant with BS7671:2008 17th Edition and Part P of Building Regulations

MEASURING INSTRUMENTS AND TESTERS

Accessories: page 1.35

17th Edition Installation Testers

Accessories: page 1.35

17th Edition Installation Testers Selection Guide for Multifunctional Testers

VOLTAGE FREQUENCY PHASE SEQUENCE

AUTO SEQUENCE TESTS

SPECIAL FUNCTIONALITIES ON LINE WARNINGS/ INFORMATION COMMUNICATION PORTS SOFTWARE MEMORIES

CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115

CAT IV/300 V 6 x AA 1.0 kg 230 x 140 x 80

CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115

Accessories: page 1.35

17th Edition Installation Testers

PROFESSIONAL DOWNLOADABLE TESTERS

SPECIALIST DOWNLOADABLE TESTERS

3 years manufactures waranty

Pass fail evaluation

RCD auto test

45 - 65 Hz // 500 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115

45 - 65 Hz // 1700 Optional CAT IV/300 V 6 x AA 1.0 kg 230 x 140 x 80

45 - 65 Hz // 500 Optional CAT IV/300 V 6 x AA 1.3 kg 230 x 103 x 115

Loop impedance tables

Accessories: page 1.35

Accessories: page 1.35

17th Edition Installation Testers

Large LCD screen with backlight

VOLTAGE FREQUENCY PHASE SEQUENCE SPECIAL FUNCTIONALITIES

User friendly keyboard enables simple and fast adjustment.

ORDERING INFORMATION: Part No. MI 3000 Description EurotestEASI Plus

STANDARD KIT INCLUDES: Part No.

Accessories: page 1.35

Accessories: page 1.35

17th Edition Installation Testers

User friendly keyboard enables simple and fast adjustment.

ORDERING INFORMATION: Part No. MI 3125 Description EurotestCOMBO

STANDARD KIT INCLUDES: Part No.

Accessories: page 1.35

Accessories: page 1.35

17th Edition Installation Testers

User friendly keyboard enables simple and fast adjustment.

ORDERING INFORMATION: Part No. MI 3100 Description EurotestEASI

STANDARD KIT INCLUDES: Part No.

Accessories: page 1.35

Accessories: page 1.35

17th Edition Installation Testers

Large LCD screen with backlight

ORDERING INFORMATION: Part No. MI 3002 Description EurotestDL

STANDARD KIT INCLUDES: Part No.

Accessories: page 1.35

17th Edition Installation Testers MI 3125B EurotestCOMBO