Spe

COMPACT CATALOGUE
PNEUMATIC REMOTE CONTROL VALVES
SP
Features
This catalog presents the SP pneumatic remote control valves with high metering characteristics for proportional control of directional control valves. H SP01 -- SP10 monoblock body SP30 or stackable. H Aluminum body. H Low actioning efforts. H Easy installation. H Frictions, detents, safety lever, several types of knob available.
Working conditions
This catalog shows technical specifications and diagrams measured at ambient temperature of 20C. Maximum feeding pressure Air flow at 7 bar (102 psi) Ambient temperature Tie rod tightening torque Standard threads Stud ends tightening torque Weight SP30 only NPT All ports SP01 SP10 - SP11 SP30 NOTE - For different conditions please contact Customer Service. 10 bar 350 dm3/min from --40 to 60C 30 Nm 1/8--27 15 Nm 2,5 kg 1,7 kg see table on page 8 11 lb ft 5,5 lb 3.7 lb 22.2 lb ft 145 psi 12.4 ft3/min
Additional information This catalog shows the product in the most usual configurations. Please contact Customer Service Dpt. for more detailled information or special request. WARNING! All specifications of this catalog refers to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT.
4th edition January 1999: This edition supercedes all prior documents.
DFC020E
SP
Performance data
Measured with 501MA pressure control curve on work ports.
Piloting pressure
SP01
10 (bar) 8 Output pressure 6 4 2 0 0 7 14 Lever angle 21 28 () (psi) 125 100 75 50 25 10 (bar) 8 Output pressure 6 4 2 0 0 10 Lever angle 20 30 ()
SP10-SP30
(psi) 125 100 75 50 25
Single port
Two contemporary
Actioning force
SP01
40 (N) Actioning force 30 20 10 3 9 (lb) 6 40 (N) Actioning force 30 20 10 0 0 10 Lever angle 20 30 () 3
SP10-SP30
9 (lb) 6
3.5N 0,78lb 0 0 7 Lever angle 14 21 ()
2.5N 0,56lb
Single port
NOTE -- Pivot distance from actioning point = 150mm - 5.90 in
DFC020E
SP
SP01 dimensional data
Monoblock joystick with 1 lever and 4 work ports, for operation of 2 valve sections. Bottom all ports.
Movements
1 1-4 1-2 1
114 4.49 103 4.06 6.5 0.26
2 T
90 3.54 Single work port 21 DFC020E
P 4
3-4 3
2-3
2 simultaneously work ports 28
Circuit
1 4
3 2
5 0.2
311 12.24
78 3.07
SP
Ordering codes SP 01 - N / 01 W - 501 A x 4 1. 2. 3. 4.
1.
TYPE 01-N
SP body kit
CODE 5CO4010500 DESCRIPTION Body kit
3.
2.
TYPE 01
Control
CODE 5ART310100 DESCRIPTION spring return to neutral
page 10
3SOF1A6820
3.
TYPE W X K Z Y T
Knobs with joint

CODE 5IMP522000 5IMP532000 5IMP542000 5IMP502000 5IMP512000 5IMP552000 DESCRIPTION less micro (standard) n.1 micro with push-button n.1 micro with recessed push-button n.1 micro with detented rocker-switch n.2 micro with spring return to neutral rocker-switch n. 2 micro with detented 3 position rocker-switch
2.
See specifical documentation for other knbos.
4. 4.
TYPE 501A
Pressure control curve 501A

CODE 5CUR501MA DESCRIPTION without step, from 0 to 8 bar / 0 to 116 psi
1. Controls with knob

TYPE 02Y CODE 5CIN902
page 10
DESCRIPTION with detent in neutral and type Y knob
DFC020E
SP
Monoblock with 1 lever and 2 work ports. Side P and T ports.
Circuit
T P
42 1.65
90 3.54
14 0.55
2
6.5 0.26
1 2
6 0.24
106 4.17
30
30
266 10.47 6 0.24
T
76 2.99
DFC020E
SP
Ordering codes SP 10 - N / 01 G - 501 A x 2 1. 2. 3.
1.
TYPE 10-N
SP body kit
2. 2.
TYPE 01G 02G 05G 06G 07G
Controls with knob

CODE 5CIN901000 5CIN904000 5CIN907000 5CIN907000 5CIN905000
page 10
DESCRIPTION spring centered, G knob with detent in neutral, G knob with detent in position 1, G knob with detent in position 2, G knob with detent in position 1 and 2, G knob
See specifical documentation for other knbos.
3.
3.
TYPE 501A

1.
DFC020E
SP
Its composed from nr.2 to 8 of single sections. Side P and T ports.
Circuit
T P 1
118 4.65 106 4.17 90 3.54
1 2
3 4
5 6
6 0.24 14 0.55
21 0.83
42 1.65
42 1.65
E
30 30
8 0.31
266 10.47 6 0.24
T
76 2.99
Pneumatic pilot control valves dimensions

TYPE
SP30/2 SP30/3 SP30/4
E
mm 84 126 168 in 3.31 4.96 6.61
Weight
kg 3.4 5.1 6.8 lb 7.4 11.1 14.8
TYPE
SP30/5 SP30/6 SP30/7
E
mm 210 252 294 in 8.27 9.92 11.57
Weight
kg 8.5 10.2 11.9 lb 18.5 22.2 25.9
TYPE
SP30/8
E
mm 336 in 13.23
Weight
kg 13.6 lb 29.6
DFC020E
SP
Ordering codes
1 (Repeat for each section) 2 ... ... 10 (max)
SP 30/n - N / 01 G - 501 A x 2 / ..... / ..... / ..... / ..... n

number of sections from 2 to 8
1.
2.
3.
1.
TYPE 30-N
SP body kit
2.
TYPE 01G 02G 05G 06G 07G
Controls with knob

CODE 5CIN901000 5CIN904000 5CIN907000 5CIN907000 5CIN905000
page 10
DESCRIPTION spring centered, G knob with detent in neutral, G knob with detent in position 1, G knob with detent in position 2, G knob with detent in position 1 and 2, G knob
2.
See specifical documentation for other knobs.
3.
TYPE 501A

4.
Assembling kit
DESCRIPTION for SP30/2 for SP30/3 for SP30/4 for SP30/5 for SP30/6 for SP30/7 for SP30/8
1. 3.
CODE 5TIR106092 5TIR106134 5TIR106176 5TIR106218 5TIR106260 5TIR106301 5TIR106344
Tie rod kits with nr.2 NPT1/2 plugs and nr.2 O- Rings
4.
DFC020E
SP
SP01 controls
01 control
Spring centered to neutral position.
02 control
With lock in neutral positions. Unlock moving up knob.
SP10-SP30 controls
01 control
Spring centered to neutral positions.
02 control
With lock in neutral positions. Unlock moving up knob.
Controls with detent

05 control
Detent in position 1, spring centered to neutral positions.
06 control
Detent in position 2, spring centered to neutral positions.
07 control
Detent in position 1 and 2, spring centered to neutral positions.
10
DFC020E
SP
Accessories Knobs with micros
Series 30 - Type V knob
WITHOUT MICRO WITH TOP PUSH-BUTTONS
43 1.69
66.5 2.62
Push- button Resistive load . . . . 4A/24Vdc Inductive load . . . . 2A/24Vac
56 2.20
145.5 5.73
Wrench 19
M 14x1.5
Cable lenght = 350 mm / 13.78 in
Series 40 - Type H Knob
WITH 6 PUSH-BUTTONS 56 2.2 102 4.02 Push- buttons Resistive load . . . . 7A/28Vdc Inductive load . . . . 5A/28Vdc
WITH ROCKER-SWITCH 134 5.26 Holder plate Rocker- switch Resistive load . . . . 16A/250Vac Inductive load . . . . 8A/250Vac
Dead mans switch
WITH FRONT SIDE PUSH-BUTTONS 56 2.2 Wrench 19 10 0.39 M14x1,5 7.6 0.30
Cable lenght 350 mm / 13.78 in
DFC020E
11
WALVOIL S.P.A. 42100 REGGIO EMILIA ITALY VIA ADIGE, 13/D TEL. +39.0522.932411 FAX +39.0522.300984 E-MAIL: INFO@WALVOIL.COM HTTP: //WWW.WALVOIL.COM CUSTOMER SERVICE TEL. +39.0522.932555 FAX +39.0522.932455
D1409808I DFC020E

Spe

Uploaded by

Copyright:

Available Formats

Spe

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Spe

Uploaded by

Copyright:

Available Formats

COMPACT CATALOGUE

PNEUMATIC REMOTE CONTROL VALVES

3.5N 0,78lb 0 0 7 Lever angle 14 21 ()

NOTE -- Pivot distance from actioning point = 150mm - 5.90 in

2 simultaneously work ports 28

Knobs with joint

See specifical documentation for other knbos.

Pressure control curve 501A

1. Controls with knob

DESCRIPTION with detent in neutral and type Y knob

266 10.47 6 0.24

Controls with knob

See specifical documentation for other knbos.

Pressure control curve 501A

266 10.47 6 0.24

Pneumatic pilot control valves dimensions

SP 30/n - N / 01 G - 501 A x 2 / ..... / ..... / ..... / ..... n

Controls with knob

See specifical documentation for other knobs.

Pressure control curve 501A

CODE 5TIR106092 5TIR106134 5TIR106176 5TIR106218 5TIR106260 5TIR106301 5TIR106344

Controls with detent

Push- button Resistive load . . . . 4A/24Vdc Inductive load . . . . 2A/24Vac

Cable lenght = 350 mm / 13.78 in

Series 40 - Type H Knob

Dead mans switch

Cable lenght 350 mm / 13.78 in

You might also like