2 Eh
2 Eh
Characteristic
PURITY WATER CONTENT ACIDITY AS ACETIC ACID ALDEHYDES AS EHA 2- ETHYL-4 METHYL PENTANOL COLOR SULPHURIC ACID COLOR ODOUR UNKNOWN
Test Method
ASTM D - 5008 ASTM D -1364 ASTM D -1613 ASTM E - 411 ASTM D - 5008 ASTM D - 1209 ASTM E - 852 ............... ASTM D-5008
Unit
WT.% WT.% WT.% WT.% WT.% APHA APHA ............. WT%
Value
99.5 MIN. 0.1 MAX. 0.015 MAX. 0.05 MAX. 0.4 MAX. 10 MAX. 50 MAX. MILD ..............
2-ETHYLHEXANOL (2EH) is a clear, colorless, mobile and neutral liquid with a characteristic odor. It is miscible with most common organic solvents, but its miscibility with water is very limited. It enters into the reactions that are typical for primary alcohols. For instance, it readily forms esters with various acids. 2ETHYLHEXANOL is the oldest, best known and most widely used of the synthetically made higher aliphatic alcohols.
o Application areas:
The esters of 2-ETHYLHEXANOL with dicarboxylic acids are excellent plasticisers
Address: No. 3, Taban St. Vali-e-Asr Ave. Tehran - IRAN
for synthetic resins and rubbers and include phthalates, adipates and sebacates .Its main application is as a feedstock in the manufacture of low volatility esters, the most important of which is di-(2-ethylhexyl) phthalate (DOP or DEHP). Other plasticizers that can be obtained from 2-ETHYLHEXANOL are the corresponding ester of adipic acid and para- hydroxybenzoic acid. 2-ETHYLHEXANOL is also used as a solvent and has a particular niche use in the formation of lacquers and coatings when slow evaporation is desired.
2-ETHYLHEXANOL is also an excellent defoaming agent for use in the photographic, varnish, rubber latex, textile printing and ceramic industries and can be used to advantage wherever foaming is undesirable. 2-ETHYLHEXANOL is manufactured using the OXO process involving hydroformylation of
propylene to N-butyraldehyde followed by an aldocondensation and reduction to produce the ethyl hexanol.
o Storage conditions:
Anhydrous
Web-site: www.arpc.ir
2-ETHYLHEXANOL
does
not
attack
common
metals.
Tanks
constructed from normal steelare reliable for storing 2-ETHYLHEXANOL. If severe demands are imposed on the quality of the product; the tanks should be constructed of stainless steel or aluminium. Moisture in the atmosphere must be excluded by storing the product under a blanket of inert gas or by installing a
E-mail: Sales@arpc-ir.net
o Packing:
Bulk or in 220 Lit (net: 180 Kg) new drums, each 4 drums strapped on a pallet. 1 Of 1