Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 627 views

    Apcotrak: Technical Data

    Uploaded by

    hafsal
    APCOTRAK is a single pack, air drying, acrylic water based road marking paint that offers fast drying properties and good wear and weathering resistance. It is suitable for direct application on asphalt and concrete roads and recommended for kerb marking. The paint has a matt finish, 35% volume solids, and a recommended dry film thickness of 25-35 microns per coat. It dries within 20 minutes at 30°C and can be overcoated within 45 minutes to unlimited time if the surface is dry and clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Apcotrak: Technical Data

    Uploaded by

    hafsal
    627 views1 page
    APCOTRAK is a single pack, air drying, acrylic water based road marking paint that offers fast drying properties and good wear and weathering resistance. It is suitable for direct application on asphalt and concrete roads and recommended for kerb marking. The paint has a matt finish, 35% volume solids, and a recommended dry film thickness of 25-35 microns per coat. It dries within 20 minutes at 30°C and can be overcoated within 45 minutes to unlimited time if the surface is dry and clean.

    Original Description:

    road marking paint

    Original Title

    apcotrak_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    APCOTRAK is a single pack, air drying, acrylic water based road marking paint that offers fast drying properties and good wear and weathering resistance. It is suitable for direct application on asphalt and concrete roads and recommended for kerb marking. The paint has a matt finish, 35% volume solids, and a recommended dry film thickness of 25-35 microns per coat. It dries within 20 minutes at 30°C and can be overcoated within 45 minutes to unlimited time if the surface is dry and clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    627 views1 page

    Apcotrak: Technical Data

    Uploaded by

    hafsal
    APCOTRAK is a single pack, air drying, acrylic water based road marking paint that offers fast drying properties and good wear and weathering resistance. It is suitable for direct application on asphalt and concrete roads and recommended for kerb marking. The paint has a matt finish, 35% volume solids, and a recommended dry film thickness of 25-35 microns per coat. It dries within 20 minutes at 30°C and can be overcoated within 45 minutes to unlimited time if the surface is dry and clean.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    APCOTRAK

    Single pack, Air drying, Acrylic Water Based Road Marking Paint
    Fast drying properties Good wear and weathering resistance Suitable for direct application on asphalt and concrete roads Recommended as kerb marking paint

    TECHNICAL DATA
    Colour Gloss Volume Solids Recommended DFT / Coat Theoretical Coverage Drying Time at 30C Overcoating interval at 30C White, Black and Golden Yellow Matt Approx. 35% 25 - 35 microns 14.0 sq.mt / ltr @ 25 mic 10.0 sq.mt / ltr @ 35 mic Surface Dry : 20 minutes Hard Dry : 1 hour Minimum : 45 minutes Maximum : Unlimited, provided surface is dry and clean from all contamination

    DIRECTIONS FOR USE


    Ensure that the road surface is clean, free from dust, oil and grease Heavy deposits of earlier paint or thermoplastic should be removed Wire brushing and water washing is recommended for removal of dust from the road surface The surface should be thoroughly dry and free from moisture before painting Surface temperature must be at least 3C above dew point but not above 50C Do not paint at temperatures below 10C or at relative humidity over 85% Under cold and humid conditions the paint would require longer drying time Two coat application is recommended for optimum performance

    MIXING
    If settling is observed in the drum, loosen the settled material with the help of a hand stirrer followed by a power driven stirrer for quick homogenous mixing.

    APPLICATION
    Brush Air Spray Recommended Thinner : Municipal / Potable water Volume of Thinner : 5 - 15 % Recommended Thinner Volume of Thinner Nozzle Orifice Nozzle Pressure Recommended Thinner Volume of Thinner Nozzle Orifice Nozzle Pressure : : : : : : : : Municipal / Potable water 10 - 30 % 1.5 3.0 mm 0.3 0.4 Mpa( = approx 3 - 4 atm; 43 - 57 p.s.i ) Municipal / Potable water 5 - 15 % 0.33 0.49 mm 12 - 15 Mpa ( = approx 120 - 150 atm; 1700 - 2100) p.s.i )

    Airless Spray

    STORAGE & PACKING


    Storage : A minimum shelf life of 12 months when stored in a cool, dry and covered place Packing : 20 litres

    SAFETY INFORMATION
    As a general safety measure, inhalation of paint mist and contact of liquid paint with skin & eyes should be avoided. Forced ventilation should be provided when applying paint in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin and eye protection are always recommended when spraying paint. Please refer to our Material Safety Data Sheet prior to using the product.
    Disclaimer: To the best of our knowledge the information provided herein are true and accurate at the date of issuance. Since we have no control over the quality or condition of the substrate or the various factors affecting the use and application of the product, we do not accept any responsibility or liability arising out of use of the product. The company reserves the right to modify data contained herein without prior notice. Any change in data would normally be followed by issue of a new data-sheet. The user should check with the nearest sales office of the company and confirm the validity of the information, prior to using the product.

    Regd. Office: Asian Paints Ltd. 6 A, Shanti Nagar, Santacruz (E), Mumbai 400 055, India. Tel: 022 - 39818000, Fax: 022 39818888, E-mail: customercare@asianpaints.com Website: www.asianpaints.com
    February 2008 Product Information Sheet - PC 2240

    You might also like