UDN2916
UDN2916
UDN2916
This device is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its final, Last Time Buy, order phase. Date of status change: UDN2916B-T, UDN2916EBTR-T: November 1, 2010 UDN2916LBTR-T, UDQ2916LBTR-T: January 31, 2011
Recommended Substitutions:
For existing customer transition, and for new customers or new applications, contact Allegro Sales.
NOTE: For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other rights of third parties which may result from its use.
Description
The UDx2916 motor drivers drive both windings of a bipolar stepper motor or bidirectionally control two DC motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM) control of the output current to 750 mA. The outputs have been optimized for a low output saturation voltage drop (less than 1.8 V total source plus sink at 500 mA). For PWM current control, the maximum output current is determined by user selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0%, 33%, 67%, or 100% of the maximum level. A PHASE input to each bridge determines load current direction. The bridges include both ground-clamp and flyback diodes for protection against inductive transients. Internally generated delays prevent crossover currents when switching current direction. Special power-up sequencing is not required. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits. The device is supplied in a 24-pin dual in-line plastic (DIP, package B) with two pairs of batwing leads as heat-sinkable tabs for enhanced power dissipation capabilities. The LB package is a 24-lead surface-mount wide SOIC with two pairs
Continued on the next page
Packages
Package B 24-pin Batwing DIP
Not to scale
OUT B
21
E SENSE
22
ONE SHOT
14
SOURCE DISABLE
RC C C
RC
Dwg. EP-007B
29319.20R
2916
Description (continued) of batwing leads. The EB package is a 44-lead power PLCC with 11 internally-fused leads on two sides. Their webbed-lead construction provides for maximum package power dissipation in the smallest possible construction. The devices are available for operation from 20C to 85C (range N), and from 40C to 105C (range Q). All packages are lead (Pb) free, with 100% matte tin leadframe plating.
Selection Guide
Part Number UDN2916B-T1 UDN2916EBTR-T1 UDN2916LBTR-T2 UDQ2916LBTR-T2
1This
Package 24-pin batwing DIP 44-pin internally fused lead PLCC 24-pin batwing SOICW 24-pin batwing SOICW
Packing 15 per tube 450 per reel 1000 per reel 1000 per reel
20 to 85
40 to 105
variant is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its nal, Last Time Buy, order phase. Status change: November 1, 2010. 2This variant is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its nal, Last Time Buy, order phase. Status change: January 31, 2011.
Allegro MicroSystems, Inc. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 8535000 www.allegromicro.com
2916
EB Package (PLCC)
LOGIC SUPPLY LOAD SUPPLY
SENSE 1
PHASE 1
OUT 1A
OUT 1B
VREF 1
RC1
R JT = 6.0C/W
I01
I11
43
42
41
44
40