Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Pcs 6000 Statcom Industry Furnace en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ABB Advanced Power Electronics

STATCOM for arc furnace compensation, Indonesia



Arc Furnace


PCS 6000 STATCOM: +/- 10 MVAr unit
ABB

Introduction and Main Technical Features

Arc furnaces used in smelters cause large disturbances on electrical grids. The frequent interruption of the arc leads to voltage
unbalances and voltage flicker on the electrical grid. The STATCOM has the duty to correct these disturbances and dynamically
stabilize the voltage, improve the power factor, compensate reactive power, resolve current unbalances and reduce harmonics on
the grid. By improving the quality of the electrical grid with the STATCOM, the process of melting iron becomes faster and
cheaper, and outages can be significantly reduced.


Problem description
Arc furnaces are used to melt iron for further processing. Such
furnaces operate by heating the iron via the radiant energy of
the arc and also by the current passing through the iron. Three-
phase arc furnaces are famous for their highly unsymmetrical
(negative sequence) currents, reducing the quality of the
surrounding electrical grid. A poor grid often means longer
melting times, and potential for frequent outages.

Solution
A +/-10MVAr STATCOM was required to be installed on the
local industrial 20kV grid. Taking advantage of the
STATCOMs extended list of features, the reactive power of
the grid could be regulated as well as compensating the
negative sequence current of the arc furnace simultaneously.
This negative sequence compensation results in a symmetrical
grid. To demonstrate how this is done on the plant, the function
of the converter using current-phasor diagrams in Figure 1.


Figure 1: Functional overview negative sequence compensation








Customer benefits
Improved production process
Stabilized electrical grid
Negative sequence control
Improved power factor resulting in lower energy costs

Reliability runs in the family
The MV STATCOM design is part of ABBs family of PCS
6000 products which are used for a wide range of applications.
It uses the same power technology as the ACS 6000 range of
MV Drives. The standardization of these power electronic
modules delivers substantial advantages in terms of cost and
quality. With many PCS 6000 sold worldwide this converter
has a proven track record and high reliability.


MV converter
ACS and PCS 6000 converter units are based on three-level
IGCT phase modules. The IGCT (Integrated Gate Commutated
Thyristor) is the state-of-the-art semiconductor element for this
power range. The converter units are connected by a medium
voltage DC link (intermediate circuit). The converter modules
are water cooled with a virtually maintenance free closed loop
water system equipped with redundant circulating pumps.

Technical Data
Plant: Arc Furnace, Indonesia
Application: STATCOM
Type: PCS 6000 STATCOM single
Installation: Indoor
Nominal reactive power: +/- 10 MVAr
Nominal voltage: 20 kV
Nominal frequency: 50Hz
STATCOM Controller: ABB AC 800PEC
Ambient conditions: +10C to +35C





ABB

ABB Switzerland Ltd
Advanced Power Electronics
CH - 5300 Turgi, Switzerland
Tel.: +41 58 589 32 35
Fax: +41 58 589 26 18
E-Mail: pes@ch.abb.com
Internet: www.abb.com/powerelectronics

Z
A
B
3
B
H
S
2
5
3
1
6
4
E
0
1

You might also like