Mangueira Aeroquip

Part No. Page Part No.
Page
302A 44
303 44
1503 43
1529 30
1531 49
1531A 49
1540 55
2550 50
2554 50
2555 49
2556 41
2565 41
2570 50
2575 41
2580 21
2583 22
2651 44
2661 19
2681 23
2766 30
2781 28
2807 65
2808 67
CR170 48
FB9218 42
FB9219 42
FB9220 42
FC136 33
FC186 65
FC194 22
FC195 27
FC211 24
FC212 29
FC234 45
FC252 51
FC254 34
FC273 35
FC300 43
FC310 26
FC318 20
FC321 47
FC323 35
FC324 36
FC325 36
FC332 40
FC350 46
FC352 52
FC355 45
FC363 63
FC364 64
FC372 57
FC373 57
FC374 58
FC375 58
FC376 59
FC377 59
FC414 48
FC465 66
FC466 20
FC469 67
FC498 21
FC505 56
FC510 26
FC555 55
FC558 54
FC563 64
FC579 53
FC606 37
FC611 38
FC616 53
FC619 19
FC636 39
FC639 31
FC645 66
FC647 40
FC650 46
FC659 34
FC690 60
FC693 39
FC699 47
FC701 62
FC702 63
FC735 32
FC736 32
FC802 54
FC901 61
FC902 60
FC914 61
FC916 62
FF9791 42
GH120 31
GH134 56
GH194 23
GH195 27
GH466 38
GH493 33
GH506 37
GH663 24
GH681 25
GH683 25
GH781 28
GH793 29
Part number index
Alphabetical index
Description Page Description Page Description Page
Assembly Instructions 362-376
AQP Hose 16-17
Hose 16-67
Hydraulic 19-38
AQP
19, 21-23, 27, 35-36

AQP/HI-IMPULSE
22-24
AQP/HI-PAC
26
Double wire braid 27-30, 32, 39
Four heavy spiral wire 32-36
Four or six spiral wire 34-37
HI-IMPULSE
22-24, 27-29, 32
HI-PAC
26
MatchMate Blue
23, 27
MatchMate Ice
31
MatchMate Plus
24, 28-29, 33
Single wire braid 22-25, 38, 43-44
Textile braid 20-22
Wire inserted suction 19-20
Special application 38-67
Air brake 45-46, 50
AQP
40, 43, 45-47

Convoluted PTFE 63-64
Engine and air brake 45-46
EPDM 38-39
Fuel and oil 45-46
Jack Hose 53
LPG 47
Polyon recoil air assemblies 42
Polyon/Thermoplastic 57-62
Power steering 49
Railroad air brake 49
Refrigeration/Air conditioning 54-56
Safety Blow Gun 42
Sewer cleaning 62-63
Silicone rubber (coolant) 52
Silicone rubber (heater) 51
SOCKETLESS 40-41
PTFE 63-67
Textile braid low pressure 40-41
How to order 18
HOSE INDEX
H
O
S
E
H O S E
This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.
15
Flexible hose lines offer many advantages over rigid tubing including routing
ease, vibration absorption, sound deadening and the ability to accommodate
movement of connected components. However, hose lines require caution in
use not only to provide long service but also to guard against potentially dan-
gerous failure.
Important
The user should carefully observe the precautions listed in this catalog, includ-
ing the recommendations on the selection of hose and fittings (pages 395-396)
and the pages on fluid compatibility (pages 400-404). In addition, care should be
taken not to exceed the minimum bend radius listed for each hose size and type
in the hose section. Maximum operating pressure should not exceed pressures
listed in the hose data. Instructions for assembling fittings to different hoses
should be followed carefully to ensure the performance of the completed assem-
bly.
WARNING: Aeroquip fitting tolerances are engineered to match
Aeroquip hose tolerances. The use of Aeroquip fittings on hose
supplied by other manufacturers and/or the use of Aeroquip hose with fit-
tings supplied by other manufacturers may result in the production of
unreliable and unsafe hose assemblies and is neither recommended nor
authorized by Aeroquip.
WARNING: Application considerations must be observed in selec-
ing appropriate components for the application of these products
contained herein. The failure to follow the recommendations set forth in
this catalog may result in an unstable application which may result in seri-
ous personal injury or property damage.
AEROQUIP SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGA-
TIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL
CONSEQUENTIAL, INCIDENTAL AND CONTINGENT DAMAGES) ARISING
OUT OF BREACH OF CONTRACT OR OF WARRANTY OR ARISING FROM
TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND
STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO
ANY HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE AEROQUIP
HOSE FITTINGS, HOSE AND AEROQUIP APPROVED EQUIPMENT, AND IN
CONFORMANCE WITH AEROQUIP PROCESS AND PRODUCT INSTRUC-
TIONS FOR EACH SPECIFIC HOSE ASSEMBLY.
Failure to follow Aeroquip process and product instructions and limitations could
lead to premature hose assembly failures resulting in property damage, serious
injury or death.
Routing
If the user will follow the recommendations on hose line routing and installation
on page 409, improved safety and longer service life of any hose installation will
result.
Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page
Section Pages
Hose 15-67
Fittings 68-180
Adapters and
181-228
Tube Fittings
Section Pages
Swivel Joints 229-244
Flexmaster Joints 245-260
FLOCS
261-267
Section Pages
Quick Disconnect
268-345
Couplings
Access., Equipment &
346-393
Assembly Instructions
Technical Data 394-433
RETURN TO CONTENTS PAGE
AQP
HOSE
The Aeroquip problem-solving family of AQP
hose featuring the patented

*
AQP
elastomer with temperatures up to +300F
*
Patent Number 4,366,746
FC300 AQP HOSE
Exceeds SAE100R5
The superior high temperature, abrasion
resistant hose. Features extensive fluid
compatibility. See page 43.
FC194 AQP/HI-IMPULSE HOSE
Exceeds SAE100R1A
Combines superior high temperature resistance
and extensive fluid compatibility plus operating
pressures up to 40% greater than SAE100R1
hose. Aeroquip HI-IMPULSE hose construction
is a patented process. Patent number 3,725,167.
See page 22.
FC195 AQP/HI-IMPULSE HOSE
Exceeds SAE100R2A
Combines superior high temperature resistance
and extensive fluid compatibility plus operating
pressures up to 40% greater than SAE100R2
hose. Aeroquip HI-IMPULSE hose construction
is a patented process.
See page 27.
FC510 AQP/Hi-Pac HOSE
Exceeds SAE100R2
Performance Requirements
Combines the flexibility and economy of
Hi-Pac hose with the temperature and fluid com-
patibility of AQP hose. Aeroquip Hi-Pac hose
construction is patented. Patent number
3,463,197. See page 26.
FC323 AQP HOSE
Uniform Pressure
Spiral Wire Hose
3000 psi
The features of AQP construction and spiral wire
reinforcement are combined in this quality hose
style. See page 35.
FC324 AQP HOSE
Uniform Pressure
Spiral Wire Hose
4000 psi
Features the patented AQP tube compound and
4-spiral wire reinforcement. Uses the same fit-
tings as FC323. See page 36.
FC325 AQP HOSE
Uniform Pressure
Spiral Wire Hose
5000 psi
Features the patented AQP tube compound and
4-spiral wire reinforcement. Pressures to 5000
psi. See page 36.
H
O
S
E
16
FC350 AQP HOSE
Exceeds FMVSS-106 Type All
The revolutionary truck hose with superior
abrasion resistance. Features an AQP tube for
excellent fluid compatibility and temperature
requirements. See page 46.
FC355 AQP HOSE
Exceeds FMVSS-106 Type All
Ideal for truck maintenance and piping condi-
tions where fluid compatibility and chemical
resistance are required. Has a blue AQP elas-
tomer cover for fluid resistance. See page 45.
FC234 AQP HOSE
Fire resistant fuel hose meets USCG AI
requirements. Offers positive fire resistance in
critical applications without using a firesleeve.
See page 45.
FC332 AQP SOCKETLESS HOSE
Offers extended fluid compatibility and operating
temperature range for low pressure applications.
Used with Aeroquip SOCKETLESS fittings for
quick and easy assembly. See page 40.
FC498 AQP HOSE
Exceeds SAE100R6
For low pressure applications. See page 21.
GH194 MatchMate BLUE
AQP/HI-IMPULSE HOSE
Exceeds SAE 100R1AT
A thin cover, 1-wire version of AQP/HI-IMPULSE
Hose that allows the use of Aeroquips MatchMate
Plus Thru-The-Cover (TTC) fittings. Pressures to 3250
psi. See page 23.
2661 AQP HOSE
Exceeds SAE100R4
The dual-purpose hose with extensive fluid com-
patibility is ideal for either suction or chemical
transfer applications. See page 19.
GH195 MatchMate BLUE
AQP/HI-IMPULSE HOSE
Exceeds SAE 100R2AT
A thin cover, 2-wire version of AQP/HI-IMPULSE
Hose that allows the use of Aeroquips MatchMate
Plus Thru-The-Cover (TTC) fittings. Pressures to
5750 psi. See page 27.
The scientifically superior hose
FC650 AQP HOSE
High Temperature Fuel and Oil
The revolutionary truck hose with superior abra-
sion resistance. Features an AQP tube for excel-
lent fluid compatibility and temperature require-
ments. Pressure to 1000 psi.
See page 46.
AQP
HOSE
H
O
S
E
17
H
O
S
E
18
FLUID CONVEYING
PRODUCTS
How to Order
Accurate processing and prompt delivery of your order
depend on easy identification of your requirements. Please
order Aeroquip parts using correct part numbers as
described in this catalog. Inquiries and orders should be
directed to your Aeroquip Distributor or:
Eaton Aeroquip
Industrial Division
3000 Strayer Road, P.O. Box 631
Maumee, Ohio 43537-0631
419/867-2600; Fax: 419/867-2629
www.aeroquip.com
Part numbers and dash sizes
Dash size designates the nominal size in 16ths of an inch.
This number immediately follows the part number and is sep-
arated from it with a dash.
Dimensions
Dimensions given in this catalog for Aeroquip products are
approximate and should be used for reference only. Exact
dimensional information for a given product is subject to
change and varying tolerances; contact Aeroquip directly for
full current information.
Hose assemblies
Aeroquip manufactures the terminal ends of our hose fittings
to the appropriate requirements established by the SAE.
Therefore, the performance ratings of these hose fittings
meet the SAE requirements. It is possible to order a hose
assembly with a fitting terminal end that has a performance
rating lower than the hose rating. When ordering hose
assemblies, please keep the connecting end performance
rating in mind since this may affect overall hose assembly
performance.
Hose assembly components (hose and fittings) are easily
assembled in the field. However, factory assembled reusable
and crimped hose assemblies are available. For complete
information, contact Aeroquip.
Cut length hose
Cut lengths of hose should be ordered as shown below by
specifying lengths in inches.
For numeric part numbers: 2651- 10- 00484
Hose type
Hose size (in 16ths of an inch)
Cut length (in inches)
last digit is in
1
/8ths of an inch 00484 = 48
1
/2 inches
For alpha-numeric part numbers: FC300- 08- 00484
Hose type
Hose dash size
Cut length (in inches)
last digit is in
1
/8ths of an inch 00484 = 48
1
/2 inches
Bulk hose
Bulk hose should be ordered by specifying length in feet as
shown below.
Complete number 500 ft.- 2651- 10
Quantity (in feet)
Hose type
Hose size (in 16ths of an inch)
Note: Length tolerance for hose, assemblies and sleeves is:
Up to and including 12 inches:
1
/8"
Above 12 inches to and including 18 inches:
3
/16"
Above 18 inches to and including 36 inches:
1
/4"
Above 36 inches: 1% of length
H
O
S
E
19
2661, FC619
2661
Wire inserted suction
Exceeds SAE 100R4
Maximum Minimum Minimum
Part Hose Hose Operating Burst Bend Vacuum Weight
Number I.D. O.D. Pressure Pressure Radius Service Per Foot
INCHES INCHES PSI PSI INCHES INCH/Hg POUNDS FITTING REFERENCE PAGE
266112 .75 1.25 300 1200 5.00 28 .42
266116 1.00 1.50 250 1000 6.00 28 .50
266120 1.25 1.80 200 800 8.00 28 .90
266124 1.50 2.06 150 600 10.00 28 1.13
266132 2.00 2.55 100 400 12.00 28 1.30
266140 2.50 3.08 62 250 14.00 28 1.72
266148 3.00 3.58 56 225 18.00 28 1.96
266164 4.00 4.69 50 200 24.00 28 3.08
CRIMP FITTINGS
-40 Crimp 143
Global
Skive Nipples 74
OTC 74
TTC 74
TTC12 (-12 only) 74
Sockets 72
Clamps 173
Accessories and Assembly
Instructions see page 346.
Construction: AQP elastomer tube, reinforcement consisting of a helical wire between two textile braids and blue AQP
elastomer cover.
Application: Suction and transfer applications for petroleum and phosphate ester hydraulic fluids, fuel, lubricating oils,
gasoline, water and many other industrial fluids. For more information on specific fluid applications and high temperature
ratings, see pages 400-404.
Operating Temperature Range: 40F to +300F (40C to +150C).
For complete Agency Listings: See pages 397-398.
Maximum working pressure for band clamp type fittings is 50 psi. Sold as bulk hose only.
FC619
Flexible, wire inserted suction
Exceeds SAE100R4
FC619-12 .75 1.21 300 1200 2.50 25 .46
FC619-16 1.00 1.48 250 1000 3.00 25 .56
FC619-20 1.25 1.75 200 800 4.00 25 .78
FC619-24 1.50 2.04 150 600 5.00 25 1.00
FC619-32 2.00 2.55 100 400 6.00 25 1.23
CRIMP FITTINGS
Global
Skive Nipples 74
OTC 74
TTC 74
Sockets 72
Clamps 173
Construction: Synthetic rubber tube, reinforcement consisting of a helical wire between two textile reinforcement layers
and synthetic rubber cover.
Application: Suction and transfer applications for petroleum hydraulic fluids, fuel, lubricating oils, gasoline, water and
many other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages
400-404.
Maximum working pressure for band clamp type fittings is 50 psi.
H
Y
D
R
A
U
L
I
C
FC466-04 .25 .48 400 1600 2.50 28 .06
FC466-06 .38 .62 400 1600 3.00 28 .10
FC466-08 .50 .75 400 1600 4.00 28 .13
FC466-10 .63 .91 350 1400 5.00 18 .18
FC466-12 .75 1.03 350 1400 7.00 18 .19
CRIMP FITTINGS
Global
**Skive Nipples 74
OTC 74
Sockets 72
Construction: Synthetic rubber tube, textile braid reinforcement and polyester braid cover.
Application: For gasoline, fuel, lubricating oils, air and water. Not approved for air brake applications. For more information
on specific fluid applications and high temperature ratings, see pages 400-404.
Operating Temperature Range: 40F to +212F (40C to +100C), Air not to exceed +160F (+71C).
*All sizes except 12
**No skiving required.
FC318
Wire inserted suction
SAE 100R4
FC318-12 .75 1.25 300 1200 5.00 28 .42
FC318-16 1.00 1.50 250 1000 6.00 28 .50
FC318-20 1.25 1.80 200 800 8.00 28 .90
FC318-24 1.50 2.08 150 600 10.00 28 1.13
FC318-32 2.00 2.57 100 400 12.00 28 1.30
FC318-40 2.50 3.07 62 250 14.00 28 1.72
FC318-48 3.00 3.64 56 225 18.00 28 1.96
FC318-64 4.00 4.69 50 200 24.00 28 3.08
CRIMP FITTINGS
-40 Crimp 143
Global
Skive Nipples 74
OTC 74
TTC 74
TTC12 (-12 only) 74
Sockets 72
Clamps 173
Construction: Synthetic rubber tube, reinforcement consisting of a helical wire between two textile braids and synthetic
rubber cover.
Application: Suction and transfer applications for petroleum hydraulic fluids, fuel, lubricating oils, gasoline and water. For
more information on specific fluid applications and high temperature ratings, see pages 400-404.
Maximum working pressure for band clamp type fittings is 50 psi. Sold as bulk hose only.
FC318, FC466
H
O
S
E
H
Y
D
R
A
U
L
I
C
20
FC466
Textile braid
Exceeds SAE 100R6 performance*
FC498
Textile braid
Exceeds SAE 100R6
FC498-04 .25 .50 400 1600 2.50 28 .08
FC498-06 .38 .62 400 1600 3.00 28 .13
FC498-08 .50 .78 400 1600 4.00 28 .15
FC498-10 .63 .91 350 1400 5.00 18 .20
FC498-12 .75 1.03 350 1400 7.00 18 .28
CRIMP FITTINGS
Global
**Skive Nipples 74
OTC 74
Sockets 72
Construction: AQP elastomer tube, textile braid reinforcement, AQP elastomer cover.
Application: Low pressure return lines in hydraulic systems. For more information on specific fluid applications and high
temperature ratings, see pages 400-404.
2580
Double textile braid
2580-4 .19 .52 1000 4000 3.00 .12
2580-5 .25 .58 800 3200 3.38 .15
2580-6 .31 .68 650 2600 4.00 .17
2580-8 .41 .77 625 2500 4.62 .19
2580-10 .50 .92 600 2400 5.50 .28
2580-12 .63 1.08 550 2200 6.50 .34
2580-16 .88 1.24 500 2000 7.38 .36
2580-20 1.12 1.50 450 1800 9.00 .43
2580-24 1.38 1.75 400 1600 10.50 .51
2580-32 1.81 2.22 350 1400 13.25 .75
REUSABLE FITTINGS 145
Sockets 73
Construction: Synthetic rubber tube, double textile braid reinforcement and synthetic rubber cover. For larger dash sizes,
see Catalog JD1.
Application: For water, gasoline, and fuel oil. For more information on specific fluid applications and high temperature
H
O
S
E
H
Y
D
R
A
U
L
I
C
21
FC498, 2580
FC194
AQP
/HI-IMPULSE
, single wire braid

Exceeds SAE 100R1A, meets or exceeds DIN 20 022 Type 1ST
FC194-04 .25 .63 3250 13000 4.00 .19
FC194-06 .38 .78 3000 12000 5.00 .30
FC194-08 .50 .90 2500 10000 7.00 .39
FC194-10 .63 1.03 2000 8000 8.00 .46
FC194-12 .75 1.19 1800 7200 9.50 .53
FC194-16 1.00 1.50 1300 5200 12.00 .80
FC194-20 1.25 1.81 900 3600 16.50 .98
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Construction: AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover.
Application: Hydraulic fluids, petroleum and fire resistant types, fuel, lubricating oils, gasoline, water, and other industrial
fluids. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
2583
Double textile braid
SAE 100R3
2583-4 .25 .57 1250 5000 3.00 .12
2583-6 .38 .75 1125 4500 4.00 .22
2583-8 .50 .94 1000 4000 5.00 .26
2583-12 .75 1.25 750 3000 6.00 .48
2583-16 1.00 1.50 565 2250 8.00 .51
2583-20 1.25 1.75 375 1500 10.00 .73
CRIMP FITTINGS
Global
OTC 74
Construction: Synthetic rubber tube, double textile braid reinforcement and synthetic rubber cover.
Application: For hydraulics, fuel, lubricating oils, gasoline, air and water. Not approved for air brake applications. For more
information on specific fluid applications and high temperature ratings, see pages 400-404.
Operating Temperature Range: 40F to +212F (40C to +100C). Air not to exceed +160F (+71C).
2583, FC194
H
O
S
E
H
Y
D
R
A
U
L
I
C
22
GH194
AQP
/HI-IMPULSE
, single wire braid

Exceeds SAE 100R1AT, meets or exceeds DIN 20 022 Type 1SN
GH194-4 .25 .53 3250 13000 4.00 .17
GH194-6 .38 .69 3000 12000 5.00 .25
GH194-8 .50 .81 2500 10000 7.00 .30
GH194-10 .63 .94 2000 8000 8.00 .36
GH194-12 .75 1.09 1800 7200 9.50 .46
GH194-16 1.00 1.41 1300 5200 12.00 .66
GH194-20 1.25 1.73 900 3600 16.50 .85
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Construction: AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover.
Application: Hydraulic fluids, petroleum and fire resistant types, fuel and lubricating oils, gasoline, water and other industrial
fluids. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
2681
HI-IMPULSE
single wire braid

2681-3 .19 .50 4000 16000 3.50 .13
2681-4 .25 .62 3250 13000 4.00 .19
2681-5 .31 .69 3250 13000 4.50 .27
2681-6 .38 .78 3000 12000 5.00 .30
2681-8 .50 .91 2500 10000 7.00 .39
2681-10 .63 1.03 2000 8000 8.00 .46
2681-12 .75 1.19 1800 7200 9.50 .53
2681-16 1.00 1.50 1300 5200 12.00 .80
2681-20 1.25 1.81 900 3600 16.50 .98
2681-24 1.50 2.06 700 2800 20.00 1.12
2681-32 2.00 2.58 600 2400 25.00 1.63
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Construction: Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover.
Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. For more
GH194, 2681
H
O
S
E
H
Y
D
R
A
U
L
I
C
23
FC211
Single wire braid
SAE 100R1AT
FC211-04 .25 .53 2750 11000 4.00 .15
FC211-06 .38 .69 2250 9000 5.00 .24
FC211-08 .50 .81 2000 8000 7.00 .29
FC211-12 .75 1.09 1250 5000 9.50 .46
FC211-16 1.00 1.41 1000 4000 12.00 .80
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover. This hose has the
maximum operating pressure printed in the layline of the hose complying to Virginia Law #1415.
GH663 HI-IMPULSE
Single wire braid meets DIN 20 022 Type 1SN

Exceeds SAE 100R1AT performance
GH663-4 .25 .53
3250 13000
4.00 .16
GH663-6 .38 .69
3000 12000
5.00 .25
GH663-8 .50 .81
2500 10000
7.00 .30
GH663-12 .75 1.09
1800 7200
9.50 .45
GH663-16 1.00 1.41
1300 5200
12.00 .68
GH663-20 1.25 1.71 950 3770 16.50 .88
GH663-24 1.50 1.99 725 2900 20.00 1.05
GH663-32 2.00 2.52 580 2320 25.00 1.31
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
*Pressure rating with reusable style fittings. **Burst (min) with reusable style fittings.
*2750 **11000
**9000
**8000
**5000
**4000
*2250
*2000
*1250
*1000
GH663, FC211
H
O
S
E
H
Y
D
R
A
U
L
I
C
24
GH681
Single wire braid
Exceeds DIN 20 022 Type 1 performance
GH681-4 .25 .47 3000 12000 2.00 .11
GH681-6 .38 .63 3000 12000 2.50 .18
GH681-8 .50 .78 3000 12000 3.50 .26
CRIMP FITTINGS
Global
Skive Nipples 74
TTC (6 only) 74
Sockets 72
Construction: Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover. Meets or exceeds DIN
requirements at 1/2 SAE Bend Radius.
GH683
Single wire braid
Exceeds SAE 100R1
GH683-4 .25 .51 3000 12000 2.00 .11
GH683-6 .38 .67 3000 12000 2.50 .18
GH683-8 .50 .81 3000 12000 3.50 .26
CRIMP FITTINGS
Global
**Skive Nipples
(4 & 6 only) 74
TTC 74
Sockets 72
Construction: Synthetic rubber tube, single wire braid reinforcement and polyester braid cover. 1/2 SAE Bend Radius.
Application: For hydraulic, air, gasoline, fuel and lubricating oils. For more information on specific fluid applications and
high temperature ratings, see pages 400-404.
GH681, GH683
H
O
S
E
H
Y
D
R
A
U
L
I
C
25
FC510
AQP
/HI-PAC
wire braid
Exceeds SAE 100R2 performance
FC510-04 .25 .57 5000 20000 3.00 .23
FC510-06 .38 .69 4000 16000 3.50 .29
FC510-08 .50 .80 3500 14000 5.00 .34
FC510-10 .63 .93 2750 11000 6.00 .44
FC510-12 .75 1.09 2250 9000 7.00 .52
FC510-16 1.00 1.37 2000 8000 9.00 .71
FC510-20 1.25 1.70 1625 6500 11.00 1.08
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
Construction: AQP elastomer tube, Hi-Pac braided wire reinforcement and blue AQP elastomer cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems.
For more information on specific fluid applications and high temperature ratings, see pages 400-404.
FC310
HI-PAC
wire braid
SAE 100R16 performance
FC310-04 .25 .55 5000 20000
2.00
.21
FC310-06 .38 .68 4000 16000
2.50
.27
FC310-08 .50 .79 3500 14000
3.50
.34
FC310-10 .63 .93 2750 11000
4.00
.44
FC310-12 .75 1.08 2250 9000
4.75
.50
FC310-16 1.00 1.36 2000 8000
6.00
.71
FC310-20 1.25 1.69 1625 6500
8.25
1.06
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, Hi-Pac braided wire reinforcement, synthetic rubber cover.
specific information on fluid applications, see pages 400-404.
Improved minimum bend radius when used with global fittings.
3.00
3.50
5.00
6.00
7.00
9.00
11.00
FC510, FC310
H
O
S
E
H
Y
D
R
A
U
L
I
C
26
GH195
AQP
/HI-IMPULSE
double wire braid

Exceeds SAE 100R2AT, meets or exceeds DIN 20 022 Type 2SN
GH195-4 .25 0.60 5750 23000 4.00 0.27
GH195-6 .38 0.75 5000 20000 5.00 0.39
GH195-8 .50 0.87 4250 17000 7.00 0.46
GH195-10 .63 0.99 3250 13000 8.00 0.54
GH195-12 .75 1.16 3000 12000 9.50 0.67
GH195-16 1.00 1.49 2500 10000 12.00 0.97
GH195-20 1.25 1.92 2250 9000 16.50 1.60
GH195-24 1.50 2.15 1750 7000 20.00 1.74
GH195-32 2.00 2.67 1500 6000 25.00 2.27
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Construction: AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel and lubricating systems.
FC195
AQP
/HI-IMPULSE
double wire braid

FC195-04 .25 .69
5750 23000
4.00 .31
FC195-06 .38 .84
5000 20000
5.00 .42
FC195-08 .50 .97
4250 17000
7.00 .51
FC195-10 .63 1.09
3250 14500
8.00 .59
FC195-12 .75 1.25
3125 12500
9.50 .75
FC195-16 1.00 1.56
2500 10000
12.00 1.04
FC195-20 1.25 2.00
2250 9000
16.50 1.68
FC195-24 1.50 2.25
1800 7200
20.00 1.91
FC195-32 2.00 2.75
1500 6000
25.00 2.39
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Sockets 73
Construction: AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems. For
Improved pressure performance when used with global fittings.
20000
16000
14000
11000
9000
8000
6500
5000
4500
1750
1625
2000
3000
2750
3500
4000
5000
1250
FC195, GH195
H
O
S
E
H
Y
D
R
A
U
L
I
C
27
2781-4* .25 .69
5750 23000
4.00 .33
2781-6 .38 .84
5000 20000
5.00 .45
2781-8 .50 .97
4250 17000
7.00 .56
2781-10 .63 1.09
3625 14500
8.00 .62
2781-12 .75 1.25
3125 12500
9.50 .80
2781-16 1.00 1.56
2500 10000
12.00 1.06
2781-20 1.25 2.00
2250 9000
16.50 1.73
2781-24 1.50 2.25
1800 7200
20.00 2.05
2781-32 2.00 2.75
1500 6000
25.00 2.70
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover.
Improved pressure performance when used with global fittings.
*Approved for 10,000 psi maximum operating pressure for static Jack Hose applications.
20000
16000
14000
11000
9000
8000
6500
5000
4500 1250
1750
1625
2000
3500
4000
5000
3000
3250
2781
HI-IMPULSE
double wire braid

GH781 /HI-IMPULSE
Double wire braid exceeds DIN 20 022 Type 2 performance

Exceeds SAE 100R16
GH781-4* .25 .53 5800 23200 2.00 .22
GH781-6 .38 .69 5000 20000 2.50 .29
GH781-8 .50 .81 4250 17000 3.50 .39
GH781-10 .63 .93 3625 14500 4.00 .44
GH781-12 .75 1.10 3125 12500 4.75 .53
GH781-16 1.00 1.42 2500 10000 6.00 .72
GH781-20 1.25 1.65 2250 9000 8.25 1.09
GH781-24 1.50 2.03 1800 7200 10.00 1.40
GH781-32 2.00 2.53 1300 5200 12.50 1.90
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Construction: Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Meets or exceeds DIN
requirements at 1/2 SAE Bend Radius.
*Approved for 10,000 psi maximum operating pressure for static Jack Hose applications.
2781, GH781
H
O
S
E
H
Y
D
R
A
U
L
I
C
28
FC212
Double wire braid
SAE 100R2AT
FC212-04 .25 .60 5000 20000 4.00 .27
FC212-06 .38 .75 4000 16000 5.00 .38
FC212-08 .50 .88 3500 14000 7.00 .46
FC212-12 .75 1.16 2250 9000 9.50 .66
FC212-16 1.00 1.50 2000 8000 12.00 1.00
FC212-20 1.25 1.89 1625 6500 16.50 1.51
FC212-24 1.50 2.15 1250 5000 20.00 1.75
FC212-32 2.00 2.51 1125 4500 25.00 2.25
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. This hose has the
maximum operating pressure printed in the layline of the hose complying to Virginia Law #1415.
GH793 HI-IMPULSE
Double wire braid meets or exceeds DIN 20 022 Type 2SN,

Exceeds SAE 100R2AT performance
GH793-4 .25 .60
5750 23000
4.00 .26
GH793-6 .38 .75
5000 20000
5.00 .38
GH793-8 .50 .87
4250 17000
7.00 .46
GH793-10 .63 .98
3625 14500
8.00 .54
GH793-12 .75 1.16
3125 12500
9.50 .66
GH793-16 1.00 1.50
2500 10000
12.00 1.01
GH793-20 1.25 1.92 2250 9000 16.50 1.54
GH793-24 1.50 2.15 1800 7200 20.00 1.68
GH793-32 2.00 2.51 1300 5200 25.00 2.22
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Sockets 73
*Pressure rating with reusable fittings.
*5000
*4000
*3500
*2750
*2250
*2000
*20000
*16000
*14000
*11000
*9000
*8000
GH793, FC212
H
O
S
E
H
Y
D
R
A
U
L
I
C
29
1529
Double wire braid
High pressure air SAE 100R2A
1529-4 .25 .69 5000 20000 4.00 .34
1529-6 .38 .84 4000 16000 5.00 .44
1529-8 .50 .97 3500 14000 7.00 .64
1529-10 .63 1.09 2750 11000 8.00 .65
1529-12 .75 1.25 2250 9000 9.50 .82
1529-16 1.00 1.56 2000 8000 12.00 1.00
1529-20 1.25 2.00 1625 6500 16.50 1.95
1529-24 1.50 2.25 1250 5000 20.00 2.02
1529-32 2.00 2.75 1125 4500 25.00 2.70
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, double wire braid reinforcement, textile braid and perforated synthetic rubber cover
to prevent blistering when used for pneumatic applications.
Application: High pressure pneumatic and gaseous applications. For more information on specific fluid applications and
high temperature ratings, see pages 400-404. NOTE: Extreme caution is warranted in the use of any hose in any high
pressure pneumatic or gaseous application.
2766
Double wire braid
MIL-DTL-13531, Type II, Class A
2766-4 .25 .69 5000 20000 4.00 .32
2766-6 .38 .84 4000 16000 5.00 .46
2766-8 .50 .97 3500 14000 7.00 .54
2766-12 .75 1.25 2250 9000 9.50 .75
2766-16 1.00 1.56 2000 8000 11.00 1.02
2766-20 1.25 2.00 1625 6500 16.00 1.63
2766-24 1.50 2.25 1250 5000 20.00 1.94
2766-32 2.00 2.75 1000 4500 22.00 2.69
CRIMP FITTINGS
Global
Skive Nipples 74
Sockets 72
Sockets 73
Application: High pressure hydraulics, fuel and lubricating oil and gasoline. For more information on specific fluid
applications and high temperature ratings, see pages 400-404.
1529, 2766
H
O
S
E
H
Y
D
R
A
U
L
I
C
30
GH120-4 0.25 0.56 5000 20000 2.00 .20
GH120-6 0.38 0.68 4000 16000 2.50 .27
GH120-8 0.50 0.82 3500 14000 3.50 .39
GH120-10 0.63 0.98 2750 11000 4.00 .50
GH120-12 0.75 1.12 2250 9000 4.75 .62
GH120-16 1.00 1.41 2000 8000 6.00 .82
GH120-20 1.25 1.71 1625 6500 8.25 1.07
GH120-24 1.50 2.03 1250 5000 10.00 1.42
GH120-32 2.00 2.51 1125 4500 12.50 1.88
CRIMP FITTINGS
Global
Skive Nipples
(4 through 20) 74
TTC 74
Sockets 72
Construction: Aeroquip exclusive low temperature compound tube and cover, double wire braid
reinforcement.
Application: Low temperature flexing and hydraulic system service with petroleum and water-base fluids. For use in frigid
environments on construction equipment and other mobile applications. For more information on specific fluid applications
and high temperature ratings, see pages 400-404.
GH120
Cold temperature applications
FC639-04 0.25 .52 3000 12000 2.00 .15
FC639-06 0.38 .67 3000 12000 2.50 .23
FC639-08 0.50 .81 3000 12000 3.50 .32
FC639-10** 0.63 1.00 3000 12000 4.00 .51
FC639-12** 0.75 1.14 3000 12000 4.75 .63
FC639-16** 1.00 1.43 3000 12000 6.00 .83
CRIMP FITTINGS
Global
Skive Nipples 74
TTC (4 through 12) 74
Sockets 72
Construction: Synthetic rubber tube with one or two wire braid reinforcements, fire and ozone resistant synthetic rubber
cover.
Application: General industrial and hydraulic system service with petroleum and water-base fluids. Recommended for
high-pressure oil lines used on construction equipment and other off-highway
applications. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
**Two braids of high tensile wire.
FC639
Constant pressure hose
SAE 100R17
GH120, FC639
H
O
S
E
H
Y
D
R
A
U
L
I
C
31
FC736
Four heavy spiral wire
Exceeds SAE 100R12
FC736-06 .38 .79 *5500* *22000* 5.00 .47
FC736-08 .50 .92 *5000* *20000* 7.00 .59
FC736-10 .63 1.11 *5000* *20000* 9.50 .80
FC736-12 .75 1.20 4000 16000 9.50 .92
FC736-16 1.00 1.48 4000 16000 12.00 1.22
FC736-20 1.25 1.83 3000 12000 16.50 1.64
CRIMP FITTINGS
Spiral Single Skive Crimp 108
Internal Skive Crimp
(16 & 20 only) 123
Global
TTC12 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, 4-heavy spiral wire reinforcement, synthetic rubber intermediate cover, and
BRUISER outer cover.
Application: High abrasion applications. Hydraulic system service with petroleum and water-base fluids, for general
industrial service. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
Operating Temperature Range: 40F to +250F (40C to +121C). Maximum ambient temperature: 180F (82C).
*4,000 psi working pressure and 16,000 psi burst with TTC12 fittings.
FC735, FC736
H
O
S
E
H
Y
D
R
A
U
L
I
C
32
FC735-04* .25 .53 *5000* *20000* 2.00 .22
FC735-06 .38 .69 5000 20000 2.50 .29
FC735-08 .50 .81 4250 17000 3.50 .39
FC735-10 .63 .93 3625 14500 4.00 .44
FC735-12 .75 1.10 3125 12500 4.75 .53
FC735-16 1.00 1.42 2500 10000 6.00 .72
FC735-20 1.25 1.70 2250 9000 8.25 1.09
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Construction: Synthetic rubber tube, double wire braid reinforcement, synthetic rubber intermediate cover, and BRUISER
outer cover. Meets or exceeds DIN requirements at 1/2 SAE bend radius.
Application: High abrasion applications. Hydraulic system service with petroleum and water-base fluids, for general
industrial service. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
Operating Temperature Range: 40F to +212F (40C to +100C). Maximum ambient temperature: 180F (82C).
*Meets SAE100R2 pressures.
FC735
Double wire braid
Exceeds DIN 20 022 Type 2SN HI-IMPULSE
at 1/2 SAE bend radius

FC136
Exceeds SAE 100R12
FC136-06** .38 .79
5500 22000
5.00 .45
FC136-08 .50 .92
5000 20000
7.00 .60
FC136-10 .63 1.11
5000 20000
9.50 .67
FC136-12 .75 1.20 4000* 16000 9.50 .90
FC136-16 1.00 1.48 4000 16000 12.00 1.19
FC136-20 1.25 1.83 3000 12000 16.50 1.60
FC136-24 1.50 2.12 2500 10000 20.00 2.01
FC136-32 2.00 2.64 2500 10000 25.00 2.93
CRIMP FITTINGS
(16 through 32) 123
Global
TTC12 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, 4-heavy spiral wire reinforcement, synthetic rubber cover.
Application: Hydraulic system service with petroleum and water-base fluids, for general industrial use. For more
*Pressure rating with TTC12 fittings.
**Approved for 10,000 psi maximum operating pressure for static Jack Hose applications.
4000*
4000*
4000*
16000*
16000*
16000*
GH493
SAE 100R12
GH493-6** .38 .79 4000 16000 5.00 .47
GH493-8 .50 .92 4000 16000 7.00 .59
GH493-10 .63 1.11 4000 16000 9.50 .69
GH493-12 .75 1.20 4000 16000 9.50 .92
GH493-16 1.00 1.48 4000 16000 12.00 1.22
GH493-20 1.25 1.83 3000 12000 16.50 1.64
GH493-24 1.50 2.12 2500 10000 20.00 2.10
GH493-32 2.00 2.64 2500 10000 25.00 2.81
CRIMP FITTINGS
Global
TTC12 74
Sockets 72
Sockets 73
Construction: Synthetic rubber tube, 4 spiral wire reinforcement, black synthetic rubber cover.
Application: Hydraulic systems service with petroleum and water-base fluids, for general industrial use. For more
**Approved for 10,000 psi maximum operating pressure for static Jack Hose applications.
GH493, FC136
H
O
S
E
H
Y
D
R
A
U
L
I
C
33
FC659, FC254
H
O
S
E
H
Y
D
R
A
U
L
I
C
34
FC254
Exceeds SAE 100R11 performance
FC254-08* .50 .98 7500 30000 8.00 .69
FC254-12 .75 1.26 6250 25000 11.00 1.12
FC254-16 1.00 1.52 5000 20000 12.00 1.31
FC254-20 1.25 1.80 4000 16000 16.50 2.05
FC254-24 1.50 2.13 3000 12000 20.00 2.35
FC254-32 2.00 2.68 3000 12000 25.00 3.13
CRIMP FITTINGS
Spiral Single Skive Crimp 116,
(20, 24 only) 108,
Internal Skive Crimp 123,
Global
Spiral TTC
100,
Sockets 72,
Construction: Synthetic rubber tube, 4-heavy spiral wire reinforcement and synthetic rubber cover.
Application: Hydraulic system service with petroleum and water-base fluids, for general industrial use. For more specific
information on fluid applications, see pages 400-404.
Rated at 10,000 psi for water blast applications using internal skive fittings.
*Available with Bruiser cover as FC854-08.
FC659
Four spiral wire
Exceeds SAE 100R12
FC659-06 .38 .79 4000 16000 *2.50* .47
FC659-08 .50 .92 4000 16000 *3.50* .57
FC659-10 .63 1.11 4000 16000 *4.75* .70
FC659-12 .75 1.20 4000 16000 *4.75* .90
FC659-16 1.00 1.48 4000 16000 *6.00* 1.21
FC659-20 1.25 1.83 3000 12000 *8.25* 2.40
CRIMP FITTINGS
Global
TTC12 74
Construction: Synthetic rubber tube, 4 spiral wire reinforcement and synthetic rubber cover.
Application: Hydraulic system service with petroleum and water-base fluids requiring premium performance and flexibility.
For more specific information on fluid applications, see pages 400-404.
*1/2 SAE bend radius.
FC323-12 .75 1.20 3000 12000 9.50 .94
FC323-16 1.00 1.48 3000 12000 12.00 1.22
FC323-20 1.25 1.86 3000 12000 16.50 1.70
FC323-24 1.50 2.11 3000 12000 20.00 2.20
FC323-32 2.00 2.63 3000 12000 25.00 3.21
CRIMP FITTINGS
Spiral Single Skive Crimp
(12 through 24) 108,
Sockets 72,
Construction: AQP elastomer tube, 4-spiral wire reinforcement and a blue AQP elastomer cover.
FC273
Four or six spiral wire
SAE 100R13
FC273-12 .75 1.26 5000 20000 9.50 1.08
FC273-16 1.00 1.52 5000 20000 12.00 1.41
FC273-20 1.25 1.96 5000 20000 16.50 2.53
FC273-24 1.50 2.26 5000 20000 20.00 3.35
FC273-32 2.00 2.80 5000 20000 25.00 5.00
CRIMP FITTINGS
Spiral Single Skive Crimp 116,
Global
Spiral TTC
100,
Sockets 72,
Construction: Synthetic rubber tube, multiple heavy spiral wire (4 wire for -12, -16; 6 wire for -20, -24 and
-32); black synthetic rubber cover.
FC323
Four spiral wire
Exceeds performance requirements SAE 100R12 (-20), SAE 100R11 (-24, -32)
FC273, FC323
H
O
S
E
H
Y
D
R
A
U
L
I
C
35
FC324, FC325
H
O
S
E
H
Y
D
R
A
U
L
I
C
36
FC325
Four spiral wire
Exceeds SAE 100R13
FC325-12 .75 1.26 5000 20000 9.50 1.09
FC325-16 1.00 1.52 5000 20000 12.00 1.42
CRIMP FITTINGS
Internal Skive Crimp 130
Sockets 72
FC324
Four spiral wire
Exceeds SAE 100R12
FC324-08 .50 .91 4000 16000 7.00 .61
FC324-12 .75 1.20 4000 16000 9.50 .99
FC324-16 1.00 1.48 4000 16000 12.00 1.29
CRIMP FITTINGS
Spiral Single Skive Crimp
(12 & 16 only) 108,
(8 only) 115,
(-12, -16) 123,
Sockets 72,
REUSABLE FITTINGS
(8 only) 165,
Sockets 73,
FC606, GH506
H
O
S
E
H
Y
D
R
A
U
L
I
C
37
CRIMP FITTINGS
Global Spiral TTC
100
GH506-12 .75 1.27 6090 24360 11.00 1.43
GH506-16 1.00 1.51 5510 22040 13.38 4.96
GH506-20 1.25 1.79 5075 20300 18.11 5.51
GH506
Four spiral wire
DIN 20023 T2, EN 856 Type 4SH
Construction: Synthetic rubber tube, 4 spiral wire reinforcement, synthetic rubber cover.
Application: Four wire hose for high pressure hydraulic systems with petroleum and water-base fluids. For more information
FC606
Six spiral wire
SAE 100R15
FC606-16 1.00 1.65 6000 24000 12.00 1.79
FC606-20 1.25 1.95 6000 24000 16.50 2.43
FC606-24* 1.50 2.30 6000 24000 20.00 3.17
CRIMP FITTINGS
Internal Skive Crimp 134
Global
Spiral TTC
100
Sockets 72
Construction: Synthetic rubber tube, 6-spiral wire reinforcement, synthetic rubber cover.
Application: High pressure hydraulics, hydrostatic transmissions. For more information on specific fluid applications and
Operating Temperature Range: 40F to +250F (40C to +121C). FC606-24 -40F to +212F (-40C to +100C).
*Factory made assemblies only. Contact Eaton Aeroquip.
FC611
Single wire braid medium pressure EPDM hose
FC611-04 .25 .53 3000 12000 4.00 28 .16
FC611-06 .38 .68 2250 9000 5.00 28 .22
FC611-08 .50 .80 2000 8000 7.00 28 .28
FC611-12 .75 1.10 1250 5000 9.50 28 .43
FC611-16 1.00 1.41 1000 4000 12.00 20 .60
FC611-20 1.25 1.71 625 2500 16.50 20 .80
FC611-24 1.50 1.99 500 2000 20.00 15 1.02
FC611-32 2.00 2.52 375 1500 25.00 15 1.28
CRIMP FITTINGS
Global
TTC 74
Construction: Synthetic EPDM tube, single wire braid reinforcement and green EPDM synthetic cover.
Application: Ground support equipment (GSE), industrial phosphate-ester based fluids, water glycol systems. For more
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
38
GH466, FC611
CRIMP FITTINGS
Global Spiral TTC
100
GH466-20 1.25 1.94 5510 22040 16.50 7.67
GH466
Six spiral wire
Construction: Synthetic rubber tube, 6 spiral wire reinforcement, synthetic rubber cover.
Application: Six wire spiral hose for pressure systems with extreme pressure peaks. For use with petroleum and water-
base fluids. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
FC636
Four spiral wire high pressure EPDM hose
FC636-12 .75 1.20 4000 16000 9.50 .88
FC636-16 1.00 1.48 4000 16000 12.00 1.17
FC636-20 1.25 1.83 3000 12000 16.50 1.55
FC636-24 1.50 2.12 2500 10000 20.00 1.96
CRIMP FITTINGS
Global
TTC12 74
Construction: Synthetic EPDM tube, 4-spiral wire reinforcement, and green EPDM synthetic cover.
FC693
Double wire braided high pressure EPDM hose
FC693-04 .25 .60 5000 20000 4.00 .25
FC693-06 .38 .75 4000 16000 5.00 .36
FC693-08 .50 .87 3500 14000 7.00 .40
CRIMP FITTINGS
Global
TTC 74
Construction: Synthetic EPDM tube, double wire braid reinforcement and green EPDM synthetic cover.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
39
FC693, FC636
FC647
Textile braid low pressure SOCKETLESS
Fire resistant meets RMA/CGA flame test requirements
FC647-04* .25 .52 360 1440 3.00 28 .06
FC647-06* .38 .66 300 1200 3.00 28 .09
FC647-08* .50 .79 300 1200 5.00 28 .12
FC647-10* .63 .92 250 1000 6.00 18 .16
FC647-12* .75 1.05 250 1000 7.00 18 .18
Construction: Synthetic rubber tube, textile braid reinforcement, polyester braided cover.
Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and
not approved for air brake applications. For more information on specific fluid applications and high temperature ratings,
see pages 400-404.
Operating Temperature Range: 40F to +212F (40C to +100C). Water not to exceed +150F (+66C), air not to
exceed +165F (+74C).
*NOTE: You must insert the correct color code in the complete part number. Color codes are BLK = black, BLU = blue, BRN = Brown, GRN =
green, WHT = white. Example: FC647-04GRN is a green cover in dash size 4.
FC332
Textile braid
Low pressure SOCKETLESS
FC332-04 .25 .49 250 1000 3.00 28 .08
FC332-06 .38 .63 250 1000 3.00 28 .12
FC332-08 .50 .75 250 1000 5.00 28 .15
FC332-10 .63 .91 250 1000 6.00 18 .20
FC332-12 .75 1.04 250 1000 7.00 18 .28
Construction: AQP elastomer tube, textile braid reinforcement, AQP elastomer cover.
is not approved for air brake applications. For more information on specific fluid applications and high temperature ratings,
see pages 400-404.
Operating Temperature Range: 40F to +300F (40C to +150C). Air not to exceed +250F (+121C) and water not to
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
40
FC332, FC647
2575
Textile braid color coded
2575-4 .25 .47 250 1000 3.00 .09
2575-6 .38 .62 250 1000 4.00 .13
2575-8 .50 .75 250 1000 5.00 .17
2575-10 .63 .91 200 800 6.00 .20
2575-12 .75 1.03 200 800 7.00 .22
Construction: Synthetic rubber tube, textile braid reinforcement, synthetic rubber cover.
is not approved for air brake applications. For more information on specific fluid applications and high temperature ratings,
see pages 400-404.
NOTE: You must insert the correct color code in the complete part number. Color codes are BLK = black, BLU = blue, GRA = gray, GRN =
green, RED = red, YEL = yellow. Example: 2575-4BLU is a blue cover in dash size 4.
2556/2565
Textile braid
Meets performance requirements SAE 30R2 Type 1
2556-4 .25 .49 360 1440 3.00 28 .08
2556-6 .38 .62 300 1200 3.00 28 .14
2556-8 .50 .75 300 1200 5.00 28 .17
2556-10 .63 .91 250 1000 6.00 18 .22
2556-12 .75 1.03 250 1000 7.00 18 .26
2565-4 .25 .50 300 1250 2.25 20 .09
2565-6 .38 .63 250 1000 3.00 20 .12
2565-8 .50 .78 200 750 3.75 10 .17
2565-10 .63 .97 175 700 4.75 10 .39
2565-12 .75 1.09 125 500 5.50 10 .33
Construction: Synthetic rubber tube, textile braid reinforcement, synthetic rubber cover.
not approved for air brake applications. For more information on specific fluid applications and high temperature ratings,
see pages 400-404. 2565 is a low temperature synthetic rubber covered MIL-DTL-13444 Type 1, Class A hose.
Operating Temperature Range: 2556: 40F to +212F (40C to +100C). Water not to exceed +150F (+66C), air not
to exceed +160F (+71C). 2565: -65F to +250F (-54C to +121C). Water not to exceed +150F (+66C), air not to
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
41
2556/2565, 2575
FB9218/FB9219/FB9220
Polyon recoil air hose assemblies
Assembly Male NPT Retracted Rec. Max. Outside
Part Hose Assembly NPT Each Length Work Coil
Number I.D. Length End, Size Nominal Length Dia. Fitting
INCHES FEET INCHES INCHES FEET INCHES SERIES PAGE
FB9218-12 .25 12
1
/4-18 6 10 3
FB9218-25 .25 25
1
/4-18 12 22 3
FB9218-50 .25 50
1
/4-18 23 45 3
FB9219-12 .38 12
3
/8-18 5 10 5
1
/2
FB9219-25 .38 25
3
/8-18 10 21 5
1
/2
FB9219-50 .38 50
3
/8-18 20 42 5
1
/2
FB9220-12 .50 12
1
/2-14 5 9 8
FB9220-25 .50 25
1
/2-14 9 18 8
FB9220-50 .50 50
1
/2-14 18 37 8
Assemblies provided with
fittings attached.
Construction: Red nylon coiled tubing; Male NPT swivel fittings and spring guards at both ends.
Application: Air up to 180 psi maximum all sizes.
Note: Aeroquip Polyon recoil air hose swivel assemblies are not recommended or approved for air brake application.
Bulk Hose: Order part number FC341-04 (
1
/4"), FC341-06 (
3
/8"), FC341-08 (
1
/2").
SAFETY BLOW GUN
1/4" Female NPT Port
Maximum outlet pressure: 30 psi. Conforms to OSHA standards.
Part Number: FF9791-01
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
42
FB9218/FB9219/FB9220
FF9791-01
FC300
Single wire braid
Exceeds SAE 100R5
FC300-04 .19 .52 3000 12000 3.00 28 .13
FC300-05 .25 .58 3000 12000 3.38 28 .16
FC300-06 .31 .67 2250 9000 4.00 28 .23
FC300-08 .41 .76 2000 8000 4.62 28 .26
FC300-10 .50 .93 1750 7000 5.50 28 .37
FC300-12 .63 1.08 1500 6000 6.50 28 .46
FC300-16 .88 1.27 800 3200 7.38 20 .44
FC300-20 1.12 1.50 625 2500 9.00 20 .52
FC300-24 1.38 1.75 500 2000 10.50 15 .67
FC300-32 1.81 2.22 300 1200 13.25 11 .94
FC300-40 2.38 2.88 300 1200 24.00 8 1.50
Sockets 73
Construction: AQP elastomer tube, polyester inner braid, single wire braid reinforcement and blue polyester braid cover.
Application: Hydraulics handling petroleum base fluids and air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids
and other industrial fluids. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
Maximum negative pressure shown for -16 and larger are suitable for those which has suffered no external damage or kinking. If greater negative
pressures are required for -16 and larger hoses, the use of an internal support coil is recommended.
Does not comply with SAE 100R5 operating pressure of 350 psi or minimum burst of 1400 psi.
1503
Single wire braid
SAE 100R5
1503-4 .19 .52 3000 12000 3.00 28 .13
1503-5 .25 .58 3000 12000 3.38 28 .16
1503-6 .31 .68 2250 9000 4.00 28 .23
1503-8 .41 .77 2000 8000 4.62 28 .26
1503-10 .50 .92 1750 7000 5.50 28 .37
1503-12 .63 1.08 1500 6000 6.50 28 .46
1503-16 .88 1.23 800 3200 7.38 20 .44
1503-20 1.12 1.50 625 2500 9.00 20 .52
1503-24 1.38 1.75 500 2000 10.50 15 .67
1503-32 1.81 2.23 350 1400 13.25 11 .94
1503-40 2.38 2.88 350 1400 24.00 11 1.43
Sockets 73
Construction: Synthetic rubber tube, textile inner braid, single wire braid reinforcement and synthetic rubber impregnated tex-
tile braid cover.
Application: For hydraulics, air, gasoline, fuel and lubricating oils. For more information on specific fluid applications and high
Maximum negative pressures shown for -16 and larger are suitable only for those which has suffered no external damage or kinking. If greater
negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
43
FC300, 1503
303/302A
Single wire braid
MIL-H-8794
303-4 .19 .52 3000 12000 3.00 28 .15
303-5 .25 .58 3000 10000 3.38 28 .19
303-6 .31 .68 2000 9000 4.00 28 .22
303-8 .41 .77 2000 8000 4.62 28 .26
303-10 .50 .92 1750 7000 5.50 28 .36
303-12 .63 1.08 1500 6000 6.50 28 .42
302A16 .88 1.23 800 3200 7.38 28 .39
302A20 1.12 1.50 600 2500 9.00 28 .51
302A24 1.38 1.75 500 2000 11.00 28 .64
302A32 1.81 2.22 350 1400 13.25 28 1.00
Sockets 73
Construction: Synthetic rubber tube, textile inner braid, single wire braid reinforcement and synthetic rubber impregnated
textile braid cover.
Application: For hydraulics, air, gasoline, fuel and lubricating oils. Air not to exceed +160F (+71C). For more
Operating Temperature Range: 303 hose: -65F to +250F (-54C to +121C). 302A hose: -40F to +250F (-40C to
+121C).
2651
Single wire braid
2651-4 .19 .52 3000 12000 3.00 28 .13
2651-5 .25 .58 3000 12000 3.38 28 .16
2651-6 .31 .68 2250 9000 4.00 28 .23
2651-8 .41 .75 2000 8000 4.62 28 .26
2651-10 .50 .92 1750 7000 5.50 28 .37
2651-12 .63 1.08 1500 6000 6.50 28 .46
2651-16 .88 1.23 800 3200 7.38 20 .44
2651-20 1.12 1.50 625 2500 9.00 20 .52
2651-24 1.38 1.75 500 2000 10.50 15 .67
2651-32 1.81 2.22 350 1400 13.25 11 .94
2651-40 2.38 2.88 350 1400 24.00 11 1.43
Sockets 73
Construction: Synthetic rubber tube, textile inner braid, single wire braid reinforcement, outer textile braid and synthetic
rubber cover.
Application: Hydraulics, gasoline, fuel and lubricating oils, air and water. Air not to exceed 250 psi or +160F (+71C). For
Maximum negative pressures shown for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative
pressures are required for -16 and larger hoses, the use of an internal support coil is recommended.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
44
303/302A, 2651
FC355
Engine & air brake
FMVSS106
FC355-04 .19 .52 1500 6000 .75 28 .17
FC355-05 .25 .58 1500 6000 1.00 28 .20
FC355-06 .31 .68 1500 6000 1.25 28 .24
FC355-08 .41 .77 1250 5000 1.75 28 .29
FC355-10 .50 .94 1250 5000 2.25 28 .40
FC355-12 .63 1.08 750 3000 2.75 20 .46
FC355-16 .88 1.24 400 1600 3.50 15 .50
FC355-20 1.13 1.52 300 1250 4.50 15 .59
FC355-24 1.38 1.75 250 1000 5.50 11 .69
FC355-32 1.81 2.22 200 800 8.50 11 .93
Sockets 73
Construction: AQP elastomer tube, polyester inner braid and a single wire braid reinforcement, blue AQP elastomer
cover.
Application: Air, gasoline, fuel, lubricating oils and coolants. For more information on specific fluid applications and high
Operating Temperature Range: 40F to +300F (40C to +150C). Air not to exceed 250 psi or +250F (+121C).
FC234
Fuel and oil
Fire resistant USCG/MMT, NMMA/BIA
FC234-05 .25 .58 1500 6000 1.00 28 .22
FC234-06 .31 .68 1500 6000 1.25 28 .25
FC234-08 .41 .76 1250 5000 1.75 28 .30
FC234-10 .50 .94 1250 5000 2.25 28 .45
FC234-12 .63 1.08 750 3000 2.75 20 .48
FC234-16 .88 1.24 400 1600 3.50 16 .51
Sockets 73
Construction: AQP elastomer tube, brass plated steel wire reinforcement, braided refractory insulation and blue AQP
elastomer cover.
Application: Diesel fuel, gasoline, hot lube oil and water. For more information on specific fluid applications and high
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
45
FC234, FC355
FC350
Engine & air brake
FMVSS106
FC350-04 .19 .52 2000 8000 .75 28 .12
FC350-05 .25 .58 1500 6000 1.00 28 .15
FC350-06 .31 .68 1500 6000 1.25 28 .20
FC350-08 .41 .77 1250 5000 1.75 28 .22
FC350-10 .50 .94 1250 5000 2.25 28 .32
FC350-12 .63 1.08 750 3000 2.75 20 .39
FC350-16 .88 1.23 400 1600 3.50 15 .38
FC350-20 1.12 1.50 300 1200 4.50 15 .45
FC350-24 1.38 1.75 250 1000 5.50 11 .54
Sockets 73
Construction: AQP elastomer tube, polyester inner braid and a single wire braid reinforcement; black polyester textile
braided cover.
Application: Air, gasoline, fuel lubricating oils and coolants. For more information on specific fluid applications and high
FC650
High temperature fuel & oil
FC650-04 .19 .48 1000 4000 .75 28 .10
FC650-06 .31 .63 1000 4000 1.25 28 .15
FC650-08 .41 .74 1000 4000 1.75 28 .19
FC650-10 .50 .83 1000 4000 2.25 28 .23
FC650-12 .63 .99 1000 4000 2.75 20 .28
CRIMP FITTINGS
Contact Aeroquip for fitting
information.
Construction: AQP elastomer tube, single wire braid reinforcement, black polyester braided cover.
Application: Diesel fuel, gasoline, fuel, lubricating oils, water, coolant and air. Not approved for air brake applications.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
46
FC350, FC650
FC321
LPG UL listing MH6044
FC321-04 .19 .52 350 1750 1.50 .11
FC321-05 .25 .58 350 1750 1.75 .13
FC321-06 .31 .67 350 1750 2.00 .18
FC321-08 .41 .77 350 1750 2.31 .21
FC321-10 .50 .92 350 1750 2.75 .29
FC321-12 .63 1.08 350 1750 3.25 .37
FC321-16 .88 1.24 350 1750 3.69 .38
Sockets 73
Construction: Synthetic rubber tube, a textile inner braid, a stainless steel wire braid reinforcement and a synthetic rub-
ber impregnated textile braid cover.
Application: Designed for butane-propane applications on either mobile or stationary equipment. For more information
WARNING: LPG is a very hazardous liquid or gas and should be handled with maximum care to prevent leakage. Since
the gas is heavier than air, it may flow along the ground if it escapes and cause an explosion or a fire. No leakage
should ever be tolerated.
FC699
High temperature fuel hose
AQP lightweight engine hose
FC699-04 .25 .49 400 1600 2.50 28 .06
FC699-06 .38 .63 400 1600 3.00 28 .10
FC699-08 .50 .77 400 1600 4.00 28 .13
FC699-10 .63 .94 350 1400 5.00 18 .18
FC699-12 .75 1.08 350 1400 7.00 18 .20
CRIMP FITTINGS
Global
OTC 74
Construction: AQP elastomer tube, single Kevlar reinforcement braid and textile braided cover.
Application: Diesel fuel, gasoline, crude and lubricating oils.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
47
FC699, FC321
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
48
CR170, FC414
FC414
Single wire braid
Pressure washer hose
FC414-06 .38 .68 5.00 3000 12000 .21
CRIMP FITTINGS
Global
TTC 74
Application: Pressure washer machines with working pressures up to 3000 psi. For more information on specific fluid
WARNING: NOT FOR STEAM USE
CR170
Single stainless steel braid LPG hose
CGA (Canadian Gas Association) Type III
CR170-04 .19 .52 350 12000 3.00 .16
CR170-06 .31 .67 350 9000 4.00 .22
CR170-08 .41 .77 350 8000 4.62 .26
CRIMP FITTINGS
information
Construction: Nylon tube, single stainless steel braid reinforcement, perforated synthetic rubber cover.
Application: LPG (propane) vehicle, alternative fuel conversion systems. For more information on specific fluid
2555
Power steering
2555-6 .38 .76 1125 4500 4.00 .20
Sockets 73
Construction: Synthetic rubber tube, double textile braid reinforcement and synthetic rubber cover.
Application: Power steering applications. For more information on specific fluid applications and high temperature
1531/1531A
Railroad air brake
Exceeds AAR-M618
1531-10 .50 .94 300 1200 5.50 .38
1531-12 .63 1.12 300 1200 6.50 .48
1531-16 .88 1.38 300 1200 7.38 .72
1531-20 1.13 1.63 300 1200 9.50 .78
1531A-24 1.38 1.88 300 1200 10.50 1.04
Sockets 73
Construction: Synthetic rubber tube, partial textile braid, wire reinforcement (1531-10 and 1531-12 have single wire
braid; 1531-16, 1531-20 and 1531A-24 have double wire braid) and synthetic rubber cover.
Application: Locomotive air brake lines. For more information on specific fluid applications and high temperature
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
49
2555,1531/1531A
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
50
2550/2554, 2570
2550/2554
Air brake
SAE J1402 FMVSS106
2550-6 .38 .75 225 900 1.75 .20
2554-6 .38 .75 225 900 3.75 .18
Sockets 73
Construction: Synthetic rubber tube, double textile braids and synthetic rubber cover.
Application: Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid
Operating Temperature Range: 2550: -40F to +200F (-40C to +93C). 2554: -65F to +212F (-54C to 100C),
conforms to ordinance spec. MIL-H-3992B, Type 1, Class 1.
2570
Air brake SAE J1402
FMVSS106
2570-6 .38 .75 225 900 1.75 .18
2570-8 .50 .88 225 900 2.00 .23
2570-10 .62 1.06 225 900 2.25 .30
Sockets 73
Construction: Synthetic rubber tube, double textile braid and synthetic rubber cover.
Application: Tractor to trailer lines, axle chamber lines and tractor service lines. For more information on specific fluid
Crimp Fittings only, contact Eaton Aeroquip.
REUSABLE FITTINGS
Clamps 173
FC252-08 .50 .81 50 200 2.00 .18
FC252-10 .63 .94 40 160 2.50 .19
FC252-12 .75 1.06 40 160 3.00 .28
FC252-16 1.00 1.34 35 140 4.00 .36
FC252
Silicone rubber (heater)
Construction: Silicone rubber tube, braided fiber reinforcement and silicone rubber cover.
Application: Heater hose for passenger cars and trucks; connecting lines from hot water heaters to coolant-circulating
systems. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
51
FC252
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
52
FC352
FC352
Silicone rubber (coolant)
FC352-08 .50 .94 100 425 .17
FC352-10 .63 1.06 100 425 .22
FC352-12 .75 1.19 100 425 .27
FC352-14 .88 1.32 100 425 .31
FC352-16 1.00 1.44 90 375 .34
FC352-18 1.12 1.56 90 375 .41
FC352-20 1.25 1.69 85 350 .45
FC352-22 1.38 1.82 85 350 .50
FC352-24 1.50 1.94 85 350 .55
FC352-26 1.63 2.06 80 325 .58
FC352-28 1.75 2.19 80 325 .63
FC352-32 2.00 2.44 75 300 .72
FC352-36 2.25 2.69 75 300 .81
FC352-38 2.38 2.82 60 250 .84
FC352-40 2.50 2.94 60 250 .89
FC352-44 2.75 3.19 50 200 .98
FC352-48 3.00 3.44 50 200 1.06
FC352-56 3.50 3.94 40 175 1.25
FC352-64 4.00 4.44 35 150 1.44
REUSABLE FITTINGS
Clamps 173
Construction: Silicone rubber tube, four spirals of nylon and silicone rubber cover.
Application: Coolant system service with liquid-cooled engines. For more information on specific fluid applications and
FC579, FC616
FC579
Jack Hose approved for 10,000 psi
Static jacking applications
FC579-04 .25 .53 10000 20000 2.00 .22
CRIMP FITTINGS
Global
Skive Nipples 74
TTC 74
Sockets 72
Application: Hydraulic jacking system service with petroleum and water-base fluids. Meets the performance require-
ments of the Material Handling Institute Specification IJ100. For more information on specific fluid applications and high
FC616
Jack Hose approved for 10,000 psi
Static jacking applications
FC616-06 .38 .79 10000 20000 5.00 .47
CRIMP FITTINGS
Global
TTC12 74
Construction: Synthetic rubber tube, four-wire spiral reinforcement and synthetic rubber cover.
Application: Hydraulic jacking system service with petroleum and water-base fluids. Meets the performance require-
ments of the Material Handling Institute Specification IJ100. For more information on specific fluid applications and high
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
53
FC802
Multi-Refrigerant hose
SAE J51 Type D
Number I.D. O.D. Pressure Pressure Radius Service* Per Foot
FC802-04 .20 .52 500 2500 2.00 25* .11
FC802-06 .33 .68 500 2500 2.50 25* .16
FC802-08 .42 .77 500 2500 3.00 25* .18
FC802-10 .52 .92 500 2500 3.50 25* .29
FC802-12 .65 1.08 500 2500 4.50 25* .35
Sockets 73
Construction: Bromobutyl cover, polyamide-veneer tube, synthetic braid reinforcement, synthetic rubber backing layer.
Application: Transportation, refrigeration and air conditioning systems using Refrigerant 12, R-22, R-134a, R-502. For
*All sizes of FC802 will withstand full negative pressure for charging purposes and are suitable for very short term service at full negative
pressure.
FC558-10 .50 .92 500 2500 5.50 28 .33
FC558-12 .63 1.06 500 2500 6.50 28 .41
FC558-16 .88 1.24 500 2500 7.38 28 .47
FC558-20 1.12 1.51 500 2500 9.00 28 .57
FC558-24 1.38 1.75 500 2500 10.50 28 .69
Sockets 73
Construction: Butyl rubber tube, single wire braid reinforcement and textile braid cover.
Application: Designed for applications using only refrigerant 134a. Not recommended for applications using Refrigerant
12 or R22. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
FC558
Refrigeration/air conditioning SAE J2064
Type B Class 1
FC558, FC802
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
54
FC555
Refrigeration/air conditioning
Multi-refrigerant
Number I.D. O.D. Pressure Pressure Radius *Service* Per Foot
FC555-12 .63 1.12 500 2500 2.50 29.5 .20
FC555-16 .88 1.38 500 2500 3.00 29.5 .25
FC555-20 1.12 1.65 500 2500 4.00 29.5 .33
CRIMP FITTINGS
Refer to Catalog JA466
Construction: Corrugated nylon tube, stabilized synthetic braid reinforcement and abrasion-resistant polyester braided
cover.
Application: Transportation refrigeration and air conditioning systems using R-134a, R-12, R-22 or R-502 (contact
Eaton Aeroquip for additional refrigerants). See pages 400-404.
*All sizes will withstand full negative pressure for charging purposes.
1540
1540-4 .19 .50 350 1750 3.00 28 .12
1540-6 .31 .67 350 1750 4.00 28 .18
1540-8 .41 .75 350 1750 4.62 28 .23
1540-10 .50 .92 350 1750 5.50 28 .32
1540-12 .63 1.06 350 1750 6.50 28 .45
1540-16 .88 1.24 350 1750 7.38 28 .45
1540-20 1.12 1.50 350 1750 9.00 28 .57
1540-24 1.38 1.75 350 1750 10.50 28 .69
Sockets 73
Construction: Synthetic rubber tube, single wire braid reinforcement and black textile braided cover.
Application: Designed for applications using Refrigerant 12. Not recommended for applications using Freon 22 or
R-502. See pages 400-404.
1540, FC555
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
55
FC505
SAE J2064 Type E Class 1, Multi-refrigerant
FC505-04 .20 .44 500 2500 1.50 29.5 .07
FC505-06 .32 .59 500 2500 2.00 29.5 .10
FC505-08 .42 .71 500 2500 2.50 29.5 .12
FC505-10 .52 .79 500 2500 3.00 29.5 .14
FC505-12 .64 .98 500 2500 4.00 29.5 .22
CRIMP FITTINGS
Construction: Nylon veneer tube, stabilized synthetic braided reinforcement and chlorobutyl rubber cover.
Application: Transportation refrigeration and air conditioning systems using R-134a, R-12, R-22 or R-502 (contact
Eaton Aeroquip for additional refrigerants). For more information on specific fluid applications and high temperature
GH134
SAE J2064 Type E Class 1, Multi-refrigerant
GH134-6 .31 .58 500 2500 2.00 29.5 .09
GH134-8 .41 .70 500 2500 2.50 29.5 .12
GH134-10 .50 .78 500 2500 3.00 29.5 .15
GH134-12 .63 .98 500 2500 4.00 29.5 .18
CRIMP FITTINGS
Construction: Nylon veneer tube, stabilized synthetic braided reinforcement and chlorobutyl rubber cover.
Application: Transportation refrigeration and air conditioning systems using R-134a, R12, R22, R404 and R407. For
GH134, FC505
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
56
FC373
Polyon/Thermoplastic
SAE 100R7 Nonconductive
FC373-02 .13 .33 2500 10000 .50 .05
FC373-03 .19 .44 3000 12000 .75 .06
FC373-04 .25 .53 2750 11000 1.25 .08
FC373-05 .31 .59 2500 10000 1.75 .09
FC373-06 .38 .66 2250 9000 2.00 .10
FC373-08 .50 .83 2000 8000 3.00 .16
FC373-12 .75 1.07 1250 5000 5.00 .22
FC373-16 1.00 1.32 1000 4000 8.00 .27
SWAGE/CRIMP 135
CRIMP FITTINGS
Global
**Skive Nipples 74
Sockets 72
Sockets 73
Construction: Thermoplastic elastomer tube, single braid polyester reinforcement and an orange nonperforated
polyurethane cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating
systems. For more information on specific fluid applications and high temperature ratings, see pages 400-404. For non-
conductivity information see item 8 on page 408.
Operating Temperature Range: 65F to +200 (54C to +93C). Water not to exceed +150F (+66C).
-40F to +200F (-40C to +93C) for flexing applications.
**Skiving not required.
FC372
SAE 100R7
FC372-02 .13 .33 2500 10000 .50 .05
FC372-03 .19 .44 3000 12000 .75 .06
FC372-04 .25 .53 2750 11000 1.25 .09
FC372-05 .31 .59 2500 10000 1.75 .10
FC372-06 .38 .66 2250 9000 2.00 .12
FC372-08 .50 .83 2000 8000 3.00 .17
FC372-10 .63 .94 1500 6000 4.00 .19
FC372-12 .75 1.07 1250 5000 5.00 .22
FC372-16 1.00 1.32 1000 4000 8.00 .28
SWAGE/CRIMP 135
CRIMP FITTINGS
Global
**Skive Nipples 74
Sockets 72
Sockets 73
Construction: Thermoplastic elastomer tube, single braid polyester reinforcement and a black perforated polyurethane
cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, pneumatic, fuel, and
lubricating systems. For more information on specified fluid applications and high temperature ranges, see pages
400-404.
Operating Temperature Range: 65F to +200F (54C to +93C). Water not to exceed +150F (+66C) air not to
-40F to +200F (-40C to +93C) for flexing applications. **No skiving of cover required.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
57
FC372, FC373
FC375
FC375-03 .19 .41 5000 20000 1.50 .05
FC375-04 .25 .51 5000 20000 2.00 .07
FC375-06 .38 .66 4000 16000 2.50 .11
FC375-08 .50 .81 3500 14000 4.00 .14
FC375-12 .75 1.06 2250 9000 8.00 .22
FC375-16 1.00 1.37 2000 8000 10.00 .27
SWAGE/CRIMP 135
Construction: Thermoplastic elastomer tube, single braid aramid reinforcement and an orange nonperforated
polyurethane cover.
Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating
systems. For more information on specific fluid applications and high temperature ratings, see pages 400-404. For
nonconductivity information, see item 8 page 408.
Operating Temperature Range: 65F to +200F (54C to +93C). Water not to exceed +150F (+66C).
FC374
SAE 100R8
FC374-03 .19 .40 5000 20000 1.50 .05
FC374-04 .25 .51 5000 20000 2.00 .08
FC374-06 .38 .66 4000 16000 2.50 .12
FC374-08 .50 .81 3500 14000 4.00 .16
FC374-12 .75 1.08 2250 9000 8.00 .23
FC374-16 1.00 1.32 2000 8000 10.00 .27
SWAGE/CRIMP 135
Construction: Thermoplastic elastomer tube, single braid aramid reinforcement and a black perforated polyurethane
cover.
lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages
400-404.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
58
FC374, FC375
FC377
Nonconductive, ultra high pressure
FC377-03 .19 .50 10000 40000 1.50 .08
FC377-04 .25 .63 10000 35000 2.50 .13
CRIMP FITTINGS
Contact Eaton Aeroquip for
fitting information
Construction: Thermoplastic elastomer tube, double braid aramid reinforcement and orange nonperforated
polyurethane cover.
Application: Hydraulic system service with petroleum, and water-base fluids, for general industrial service. For more
information on specific fluid applications and high temperature ratings, see pages 400-404. For nonconductivity
information, see item 8 on page 408.
CAUTION: Applies only to hose that has suffered no damage, has been properly assembled with hose guards, and tested to required test
pressure.
WARNING: The use of this hose in high pressure application
requires the use of undamaged hose which has been properly
assembled with hose guards and tested to the required pressure.
Installations must not exceed the recommended minimum bend radius. The
failure to follow these instructions may result in sudden hose failure with the
potential for serious personal injury and property damage.
FC376
Ultra high pressure
FC376-03 .19 .50 10000 40000 1.50 .09
FC376-04 .25 .63 10000 35000 2.50 .13
CRIMP FITTINGS
Contact Eaton Aeroquip for
fitting information
Construction: Thermoplastic elastomer tube, double braid aramid reinforcement and a black perforated polyurethane
cover.
Application: High pressure hydraulic system service with petroleum, fire-resistant, and water-base fluids, pneumatic
and lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages
400-404.
Operating Temperature Range: 40F to +150F (-40C to +66C).
CAUTION: Applies only to hose that has suffered no damage, has been properly assembled with hose guards, and tested to required test
pressure.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
59
FC376, FC377
WARNING: The use of this hose in high pressure application
requires the use of undamaged hose which has been properly
assembled with hose guards and tested to the required pressure.
Installations must not exceed the recommended minimum bend radius. The
failure to follow these instructions may result in sudden hose failure with the
potential for serious personal injury and property damage.
Construction: Two Aeroquip SAE 100R7 thermoplastic hoses permanently joined.
Application: Hydraulic system service with petroleum, fire-resistant and water-base fluids, pneumatic, fuel, and
lubricating systems. For more information on specified applications and high temperature ranges, see pages 400-404.
Operating Temperature Range: -65F to +200F (-54C to +93C). Water not to exceed +150F (+66C) air not to
-40F to +200F (40C to +93C) for flexing applications.
**No skiving of cover needed.
FC902
Polyon/Thermoplastic Twin-line
SAE 100R7
Number Hose Polyon
Part Number of Hoses I.D. Hose Series
INCHES FITTING REFERENCE PAGE
FC902-00-Length Designation 2 0.19 FC372-03
SWAGE/CRIMP
Swage 135
Crimp**
Skive Nipples 74
Sockets 72
Sockets 73
FC690
Low temperature flexing SAE 100R7
FC690-04RL .25 .53 2750 11000 1.25 .09
FC690-06RL .38 .66 2500 10000 2.50 .11
FC690-08RL .50 .84 2500 10000 3.50 .18
SWAGE 135
Construction: Thermoplastic elastomer tube, double braid polyester reinforcement and low temperature black, perforated
polyurethane cover.
lubricating systems utilized in continuous low temperature flexing applications. For more information on specified fluid
exceed +160F (+71C). Sold in reel lengths only.
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
60
FC690, FC902
FC901
Number Hose Polyon
SWAGE/CRIMP
Swage 135
Crimp**
Skive Nipples 74
Sockets 72
Sockets 73
Construction: Two Aeroquip SAE 100R7 Nonconductive thermoplastic hoses permanently joined.
Application: Hydraulic system service with petroleum, fire-resistant and water-base fluids, fuel, and lubricating systems.
For more information on specific fluid applications and high temperature ratings, see pages 400-404. For nonconductivity
information see item 8 on page 408.
Operating Temperature Range: -65F to +200 (-54C to +93C). Water not to exceed +150F (+66C).
**No skiving of cover needed.
Construction: Two Aeroquip SAE 100R8 thermoplastic hoses permanently joined.
Application: Hydraulic system service with petroleum, fire-resistant and water-base fluids, pneumatic, fuel, and
lubricating systems. For more information on specific fluid applications and high temperature ratings, see pages
400-404.
Operating Temperature Range: -65F to +200F (-54C to +93C). Water not to exceed +150F (+66C), air not to
FC914
SAE 100R8
Number Hose Polyon
SWAGE/CRIMP 135
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
61
FC901, FC914
Construction: Two Aeroquip SAE 100R8 thermoplastic nonconductive hoses permanently joined.
Application: Hydraulic system service with petroleum, fire-resistant and water-base fluids, fuel and lubricating systems.
For more information on specific fluid applications and high temperature ratings, see pages 400-404. For nonconductivi-
ty information, see item 8 page 408.
Operating Temperature Range: -65F to +200F (-54C to +93C). Water not to exceed +150F (+66C).
Important: Cut lengths of twin-line hoses should be ordered as shown below by specifying the length in inches:
Example: FC902-00-00484
Hose Type Cut Length (in inches) last digit is in 1/8ths of an inch 00484=48
1
/
2
inches
Aeroquip hose part #'s FC372, FC373, FC374, FC375, FC376 and FC377 can be permanently joined to form twin-line or multi-line hose designs. The above
twin-line part #'s are the typical standard designs. If you would like to mate multiple pressure hoses in one design, please contact Eaton Aeroquip.
FC916
Number Hose Polyon
SWAGE/CRIMP 135
FC701
Sewer cleaning hose
assemblies Gator hose
FC701-12 .75 1.15 2500 6250 9.50 .27
FC701-16 1.01 1.41 2500 6250 12.00 .36
FC701-20 1.26 1.79 2500 6250 12.00 .58
SWAGE 139
Construction: Blue thermoplastic tube, single braid, polyester reinforcement and an orange ether-based polyurethane
cover.
Application: High pressure sewer cleaning. For more information on specified applications and high temperature
ranges, see pages 400-404.
FC916, FC701
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
62
FC363
Convoluted PTFE hose
Nonconductive tube
Maximum Minimum Minimum Minimum
Part Hose Hose Operating Burst Bend Kink Vacuum
Number I.D. O.D. Pressure Pressure Radius Radius Service
INCHES INCHES PSI PSI INCHES INCHES INCH/Hg FITTING REFERENCE PAGE
FC363-08 .54 .74 1250 5000 2.88 1.00 28
FC363-12 .81 1.06 1100 4400 3.75 2.00 28
FC363-16 1.00 1.28 1000 4000 5.00 2.50 24
FC363-20 1.24 1.53 1000 4000 6.25 3.50 20
FC363-24 1.52 1.81 750 3000 7.50 4.50 12
FC363-32 2.00 2.31 500 2000 10.00 6.00 5
CRIMP FITTINGS
Crimp 142
Sockets 72
Construction: Convoluted PTFE tube with stainless steel single wire braid cover.
Application: Chemical, food, water and waste handling, and various transfer applications. Not recommended for steam-
cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
Steam 200 psi at +388F max. Engineering information is available for specific critical temperature requirements, contact Eaton Aeroquip.
FC702, FC363
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
63
FC702
Sewer cleaning hose
assemblies Gator hose
FC702-12 .75 1.19 3000 7500 9.50 .29
FC702-16 1.01 1.41 3000 7500 12.00 .36
SWAGE 139
Construction: Blue thermoplastic elastomer tube, single braid, high strength textile reinforcement and a blue
ether-based polyurethane cover.
Application: High pressure sewer cleaning. For more information on specific applications and high temperature ranges,
see pages 400-404.
INCHES INCHES PSI PSI INCHES INCHES INCH/Hg FITTING REFERENCE PAGE
FC364-08 .54 .74 1250 5000 2.88 1.00 28
FC364-12 .81 1.06 1100 4400 3.75 2.00 28
FC364-16 1.00 1.27 1000 4000 5.00 2.50 24
FC364-20 1.24 1.53 1000 4000 6.25 3.50 20
FC364-24 1.52 1.81 750 3000 7.50 4.50 12
FC364-32 2.00 2.31 500 2000 10.00 6.00 5
FC364-40 2.53 2.90 100 400 12.50 8.00 5
FC364-48 3.04 3.48 100 400 15.00
CRIMP FITTINGS
Crimp 142
Sockets 72
Construction: Convoluted conductive PTFE tube with stainless steel wire braid cover.
Application: Steam lines and fuel transfer applications where static dissipation is required. Not recommended for
steam-cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages
400-404.
Steam 200 psi at +388F max. Engineering information is available for specific critical temperature requirements, contact Eaton Aeroquip.
FC364
Conductive
FC563
Nonconductive tube
INCHES INCHES PSI PSI INCHES INCH/Hg INCH/Hg FITTING REFERENCE PAGE
FC563-08 .54 .74 1250 5000 2.88 1.00 28
FC563-12 .81 1.06 1100 4400 3.75 2.00 28
FC563-16 1.00 1.28 1000 4000 5.00 2.50 24
FC563-20 1.24 1.53 1000 4000 6.25 3.50 20
FC563-24 1.52 1.81 750 3000 7.50 4.50 10
FC563-32 2.00 2.31 500 2000 10.00 6.00 7
CRIMP FITTINGS
Crimp 142
Sockets 72
Construction: Convoluted PTFE tube with stainless steel single wire braid reinforcement and integral black polyester
overbraid cover.
Application: Chemical transfer and various chemical processing applications. Not recommended for steam or steam-
cold water cycling. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
FC364, FC563
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
64
2807
PTFE hose
SAE 100R14A
2807-3 .14 .25 3000 12000 1.50 28 .04
2807-4 .19 .30 3000 12000 2.00 28 .06
2807-5 .26 .37 3000 12000 3.00 28 .08
2807-6 .32 .43 2500 10000 4.00 28 .10
2807-8 .42 .54 2000 8000 5.25 28 .12
2807-10 .51 .63 1500 6000 6.50 28 .16
2807-12 .64 .76 1200 4800 7.75 28 .18
2807-16 .88 1.03 1000 4000 9.00 12 .26
2807-20 1.12 1.29 625 2500 16.00 12 .34
CRIMP FITTINGS
Crimp 140
Sockets 72
Sockets 73
Construction: Extruded PTFE tube with stainless steel single wire braid.
Application: Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water
cycling. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
Steam 200 psi at +388F max. Engineering information is available for specific critical temperature requirements. Contact Eaton Aeroquip.
Maximum negative pressure for -06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative
pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06
and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or
negative pressure is expected.
FC186
PTFE hose
FC186-04 .19 .30 1000 6000 2.00 28 .06
FC186-05 .26 .37 1000 6000 3.00 28 .07
FC186-06 .32 .43 1000 6000 4.00 28 .08
FC186-08 .42 .54 750 4500 5.25 28 .10
FC186-10 .51 .63 600 4000 6.50 28 .14
FC186-12 .64 .76 600 4000 7.75 28 .16
CRIMP FITTINGS
Crimp 140
Sockets 72
Sockets 73
Construction: Extruded PTFE tube with stainless steel single wire braid.
Application: Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold
water cycling. For more information on specific fluid applications and high temperature ratings, see pages 400-404.
FC186, 2807
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
65
FC645, FC465
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
66
FC645
PTFE hose
Conductive SAE 100R14B performance
FC645-06 .32 .51 2500 10000 4.00 28 .10
CRIMP FITTINGS
Contact Aeroquip for Fitting
Information, Factory Crimp Only
Construction: Conductive extruded black PTFE tube with stainless steel single black wire braid abrasion resistant
engine hose.
Application: Steam, compressor discharge and most chemical applications. Not recommended for steam-cold water
Maximum negative pressure is suitable for hose which has suffered no external damage or kinking. If greater negative pressures are
required, the use of an internal support coil is recommended. Use of an internal support coil in -06 PTFE hose is recommended for tube
support where extended or continuous service at high temperature together with low or negative pressure is expected.
FC465
PTFE hose
Conductive SAE 100R14B
FC465-03 .14 .25 3000 12000 1.50 28 .04
FC465-04 .19 .30 3000 12000 2.00 28 .06
FC465-05 .26 .37 3000 12000 3.00 28 .08
FC465-06 .32 .43 2500 10000 4.00 28 .10
FC465-08 .42 .54 2000 8000 5.25 28 .12
FC465-10 .51 .63 1500 6000 6.50 28 .16
FC465-12 .64 .76 1200 4800 7.75 28 .18
FC465-16 .88 1.03 1000 4000 9.00 12 .26
FC465-20 1.12 1.29 625 2500 16.00 12 .34
CRIMP FITTINGS
Crimp 140
Sockets 72
Sockets 73
Construction: Conductive extruded black PTFE tube with stainless steel single wire braid.
Application: Steam, compressor discharge and most chemical applications. Not recommended for steam-cold water
2808
PTFE hose
2808-8 .42 .58 2750 11000 4.62 28 .20
2808-10 .51 .68 2500 10000 5.50 28 .26
2808-12 .64 .81 1750 7000 6.50 20 .30
2808-16 .88 1.09 1500 6000 7.38 15 .44
2808-20 1.12 1.35 1125 4500 11.00 15 .57
2808-24 1.38 1.62 800 3200 14.00 15 .70
Sockets 73
2808, FC469
H
O
S
E
S
P
E
C
I
A
L
A
P
P
L
I
C
A
T
I
O
N
67
Construction: Conductive extruded PTFE tube with stainless steel single wire braid.
Application: High pressure chemical and fluid transfer. For information on specific fluid applications and high temperature
Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at
high temperature together with low or negative pressure is expected.
FC469
PTFE hose
Conductive
FC469-06 .30 .48 4000 16000 2.50 28 .17
FC469-08 .39 .61 4000 16000 2.88 28 .24
FC469-10 .49 .72 3500 14000 3.25 28 .29
CRIMP FITTINGS
information.
Construction: Extruded PTFE tube with double stainless steel braids.
Application: Hot air, steam and most chemical applications. Not recommended for steam-cold water cycling. For more
RETURN TO CONTENTS PAGE

Mangueira Aeroquip

Uploaded by

Copyright:

Available Formats

Mangueira Aeroquip

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mangueira Aeroquip

Uploaded by

Copyright:

Available Formats

What are the different types of hoses described in the document?

What factors should be considered when selecting hoses?

Part No. Page Part No.

19, 21-23, 27, 35-36

40, 43, 45-47

hose featuring the patented

, single wire braid

, single wire braid

single wire braid

Single wire braid meets DIN 20 022 Type 1SN

double wire braid

double wire braid

double wire braid

Double wire braid exceeds DIN 20 022 Type 2 performance

Double wire braid meets or exceeds DIN 20 022 Type 2SN,

at 1/2 SAE bend radius

You might also like