The Dynavane is a self-cleaning inertial air cleaner designed to handle large volumes of air at high velocities with low resistance. It operates using inertial separation to efficiently remove airborne particulate matter without requiring routine maintenance.
The Dynavane is a self-cleaning inertial air cleaner designed to handle large volumes of air at high velocities with low resistance. It operates using inertial separation to efficiently remove airborne particulate matter without requiring routine maintenance.
The Dynavane is a self-cleaning inertial air cleaner designed to handle large volumes of air at high velocities with low resistance. It operates using inertial separation to efficiently remove airborne particulate matter without requiring routine maintenance.
The Dynavane is a self-cleaning inertial air cleaner designed to handle large volumes of air at high velocities with low resistance. It operates using inertial separation to efficiently remove airborne particulate matter without requiring routine maintenance.
The Camfil Farr Dynavane is a compact, selfcleaning, inertial separator. It is designed to
handle large volumes of air at high velocities, while operating at a constant airflow resistance. The Dynavane incorporates inertial separation, providing high dust removal efficiency of airborne particulate matter. The Dynavane is normally self-cleaning and does not require routine maintenance. It is designed to provide long, trouble-free service under the most difficult conditions. Dynavane blade packs are removable. This unique feature facilitates thorough inspection or service, if necessary.
Large air volume,
constant pressure drop, self-cleaning, high efficiency air cleaner
Extensive testing under laboratory and field
conditions has proven the Dynavane to be one of the most effective high volume air cleaners for use in single and multi-stage filtering systems. It has been demonstrated over many years of application that the Dynavane inertial separator will perform efficiently in a wide variety of operating conditions. Standard, pre-engineered Dynavane assemblies are available in sizes ranging from one single cell to the modular arrangement of 112 cells. The Dynavane operates effectively at volumes of 500 CFM (850 m3/h) to 2000 CFM (3400 m3/h) per cell with comparatively low resistance. Multiple units can be combined to handle even greater air volumes with minimal space requirements.
The Dynavane consists of multiple blade packs, a
housing and a bleed outlet assembly. Units may be combined for higher airflow.
The Dynavane's efficiency is dependent on the
size and specific gravity of the dust particles, as well as the air approach velocity and bleed air rate. Large variations in inlet temperature also affect collection efficiency. Normal design condition is for a bleed rate of 10% of the inlet airflow (or 11 % of the clean airflow) at ambient temperature, and a dust specific gravity of 2.54.
Camfil Farr
Product sheet
Dynavane
4207- 0606
Camfil Farr - clean air solutions
The Dynavane operates on the principle of
inertial separation. As the mixture of dust and air enters the Dynavane, most of the air changes direction, separating itself from the dust as it passes through the vanes. Because of its greater mass and natural movement (inertia), the dust continues in a straight line with 10% of the incoming air (the "bleed air") through the bleed slot and into the dust bin duct. The dust-laden bleed air may then be discharged directly back to the surrounding atmosphere or into a secondary dust collector. Operation of the Dynavane on dusts with different specific gravities and/or at different air temperatures may be investigated via the size correction charts on the following pages. Because temperature effects are secondary, corrections to Dynavane performance for normal ambient temperature variations is not necessary. Dynavane blade packs may require periodic cleaning depending on concentration levels and consistency of contaminant. In these instances the blade packs are easily removed for cleaning. Caution should be exercised in the application of the Dynavane when dealing with oily or sticky contaminant. Additional application and performance information is available from Camfil Farr. Vanes are computer optimized and individually die-formed, thus, providing superior performance characteristics over stamped louvers. Because of this unique construction method, the Camfil Farr Dynavane achieves the absolute minimum in contaminant penetration. The Dynavane's performance is unequaled as a pre-cleaner or as a single-stage system. Dynavane cells and enclosures are fabricated of carbon steel, optional stainless steel or aluminum. The standard Dynavane meets requirements for most applications which operate at continuous temperatures of up to 250F (121C). For higher temperatures or corrosive atmospheres, the stainless steel option should be considered.
Clean Airflow
Low Resistance Individually Formed Vanes Oversize Bleed Slot
Dust Bin Slot
Inlet Flow
Clean Airflow
Bleed Air
Dynavane Supply Fan Dirty Air Inlet
Clean Air
Bleed Air Fan
Bleed Air Outlet
& Dirty Air
Suction System - Frequently used on ventilation
installations with the fan located downstream of the Dynavane. A small auxiliary fan is the most practical method of attaining the recommended 10% belled airflow. Dynavane
Blower
Clean Air Dirty Air Inlet
Bleed Air Outlet & Dirty Air
Pressure System - Pressure system fan location
is upstream of the Dynavane. A bleed air fan is not required with this system if the bleed ducting is kept to a minimum, and the pressure on the downstream side of the Dynavane is at least 0.25 w.g. (0.06 kPa). Secondary filters may be used downstream of the DynaVane, in either system, to achieve any desired level of cleanliness. Resistance on the clean air side of the DynaVane, on pressure systems, may require bleed damper to prevent overbleed.
INLET SCREEN: Four-mesh
galvanized inlet screen keeps out large debris.
TAPERED CELLS: Unique
engineering design controls airflow for efficient dirt removal at lowest pressure drop.
BLEED SLOT: Rounded bleed air
slot entry is an integral part of the dust pan. The rounded slot minimizes obstruction or plugging even under the worst conditions. CONSTRUCTION: The Dynavanes rugged construction provides for system integrity and uniform performance throughout its operating life.
REMOVABLE BLADE PACKS:
Dynavane blade packs unique design provides for removal should inspection or servicing be necessary.
PRECISION VANE DESIGN: Camfil
Farr individually forms each vane, eliminating metal cracks at the stress points of stamped metal-type louvers. Camfil Farr vanes are precisely assembled and spaced for optimum efficiency and minimum pressure loss.
HOUSING: 11-gauge mild
steel, all welded construction.
SIMPLE BOLT-ON INSTALLATION: Each
DynaVane is designed to readily adapt to other air handling equipment. Mounting flanges on the periphery of both air entering and air exiting sides make installation fast and trouble-free.
BLEED AIR MANIFOLD: Individual cell dust bins
discharge separated dirt into a common manifold,. The manifold outlet may be ordered on the right side, the left side, or bottom center of the Dynvane.
All components are primed and finished with a top coat of gray enamel.
Performance Particle size versus efficiency
Efficiency
Airflow resistance
Effect of changes in specific gravity of dust and operating temperature
Performance curves on this page were prepared based on a standard temperature of 70 F (21 C) and a specific gravity of dust of 2.54. Variations from these "standards" will somewhat affect efficiency. Temperatures exceeding 250 F (121 C) may require Dynavanes constructed of stainless steel for optimum performance. For operating temperatures exceeding 500 F (260 C) contact your Camfil Farr representative. The charts demonstrate that as temperature increases, and/or specific gravity decreases, the air cleaner treats the dust as if particles were smaller. 4
Note: See sales drawings 125557 (1DV), 12555 (2DV) and
400987 (3DV) for respective sizes and detailed dimensions.
Multi-Cell Banks For higher airflow, or to fit special physical requirements, multi-cell Dynavane banks may be the solution. Four basic arrangements are offered ranging from 10 to 112 cells. All cells are horizontally inclined and incorporate a side plenum, discharging bleed air down. These banks can be grouped to accommodate even higher airflow than shown. Bleed manifolds are sized for suction system utilizing bleed blowers. Do not use multi-cell banks on pressure systems. Side View
Front View 3.0 (76.2 mm)
35.0 (889 mm)
Width
Front View
Front View
Front View
Height
Arrangement One
Arrangement Three
Arrangement Two
5.0 (127.0 mm)
Bleed
Bleed
Arrangement Four Bleed
Bleed
Airflow (cfm) per Cell at Various Pressure Drops
0.75 w.g.
1.00 w.g.
1.25 w.g.
Clean
Bleed
Clean
Bleed
Clean
Bleed
810
90
935
104
1060
118
Based on standard air. If temperature and/or pressure are
different, use correction factors.
Ordering Information Specify number 045496-000 and size from the charts on the next two pages. On arrangements 1 and 2, also specify right or left-hand bleed. Arrangments 3 and 4 are center bleed. See sales drawing 045496 for detail.
Dimensions & Capacities
Dynavane Airflow (cfm) at Various Dynavane Pressure Drops
Number of Cells Wide
Clean
Bleed
Clean
Bleed
Clean
810
90
935
104
1060
1620
180
1870
208
2120
2430
270
2805
312
3180
3240
360
3740
416
4240
4050
450
4675
519
4860
540
5610
5670
630
6480
1DV
Single Cell High
Model Designation
0.75 w.g.
1.0 w.g.
Dimensions (inches)
1.25 w.g.
Weight (lbs)
118
5.75
4.62
4.25
110
236
10.75
5.25
6.31
168
353
15.75
5.94
7.88
226
471
20.75
6.81
8.81
284
5300
589
25.75
7.69
9.62
342
623
6360
707
30.75
8.62
10.38
400
6545
727
7420
824
35.75
9.50
11.06
458
720
7480
831
8480
942
40.75
10.44
11.75
516
7290
810
8415
935
9540
1060
45.75
11.38
12.38
574
10
8100
900
9350
1039
10600
1178
50.75
12.31
12.94
632
11
8910
990
10285
1143
11660
1296
55.75
13.25
13.44
690
12
9720
1080
11220
1247
12720
1413
60.75
14.19
14.00
748
13
10530
1170
12155
1351
13780
1531
65.75
15.19
14.50
806
14
11340
1260
13090
1454
14840
1649
70.75
16.12
15.00
864
15
12150
1350
14025
1558
15900
1767
75.75
17.12
15.44
922
16
12960
1440
14960
1662
16960
1884
80.75
18.06
15.88
980
17
13770
1530
15895
1766
18020
2002
85.75
19.03
16.31
1038
18
14580
1620
16830
1870
19080
2120
90.75
20.00
16.75
1096
19
15390
1710
17765
1974
20140
2238
95.75
20.97
17.19
1154
20
16200
1800
18700
2078
21200
2356
100.75
21.94
17.56
1212
1620
180
1870
208
2120
236
5.75
4.62
4.25
233
3240
360
3740
416
4240
471
10.75
5.19
6.50
342
4860
540
5610
623
6360
707
15.75
5.75
8.88
451
6480
720
7480
831
8480
942
20.75
6.31
11.25
50
8100
900
9350
1039
10600
1178
25.75
7.00
12.94
669
9720
1080
11220
1247
12720
1413
30.75
7.81
14.00
778
11340
1260
13090
1454
14840
1649
35.75
8.69
15.00
887
12960
1440
14960
1662
16960
1884
40.75
9.56
15.88
996
2DV
14580
1620
16830
1870
19080
2120
45.75
10.44
16.75
1105
Double Cell High
10
16200
1800
18700
2078
21200
2356
50.75
11.31
17.56
1214
11
17820
1980
20570
2286
23320
2591
55.75
12.25
18.31
1323
12
19440
2160
22440
2493
25440
2827
60.75
13.12
19.06
1432
13
21060
2340
24310
2701
27560
3062
65.75
14.06
19.75
1541
14
22680
2520
26180
2909
29680
3298
70.75
14.94
20.50
1650
15
24300
2700
28050
3117
31800
3533
75.75
15.88
21.12
1759
16
25920
2880
29920
3324
33920
3769
80.75
16.81
21.75
1868
17
27540
3060
31790
3532
36040
4004
85.75
17.75
22.38
1977
18
29160
3240
33660
3740
38160
4240
90.75
18.69
23.00
2086
19
30780
3420
35530
3948
40280
4476
95.75
19.62
23.56
2195
20
32400
3600
37400
4156
42400
4711
100.75
20.56
24.12
2304
2430
270
2805
312
3180
353
5.75
4.75
4.25
360
4860
540
5610
623
6360
707
10.75
5.25
6.75
535
7290
810
8415
935
9540
1060
15.75
5.75
9.00
710
9720
1080
11220
1247
12720
1413
20.75
6.50
11.50
885
12150
1350
14025
1558
15900
1767
25.75
7.00
14.00
1060
14580
1620
16830
1870
19080
2120
30.75
7.50
16.25
1235
17010
1890
19635
2182
22260
2473
35.75
8.25
18.00
1410
19440
2160
22440
2493
25440
2827
40.75
9.00
19.00
1585
3DV
21870
2430
25245
2805
28620
3180
45.75
10.00
20.25
1760
Triple Cell High
10
24300
2700
28050
3117
31800
3533
50.75
10.75
21.25
1895
11
26730
2970
30855
3428
34980
3887
55.75
11.74
22.25
2110
12
29160
3240
33660
3740
38160
4240
60.75
12.50
23.00
2285
13
31590
3510
36465
4052
41340
4593
65.75
13.50
23.75
2460
14
34020
3780
39270
4363
44520
4947
70.75
14.25
24.75
2635
15
36450
4050
42075
4675
47700
5300
75.75
15.00
25.50
2810
16
38880
4320
44880
4987
50880
5653
80.75
16.00
26.25
2985
17
41310
4590
47685
5298
54060
6007
85.75
17.00
27.00
3160
18
43740
4860
50490
5610
57240
6360
90.75
17.75
27.75
3335
19
46170
5130
53295
5922
60420
6713
95.75
18.75
28.50
3510
20
48600
5400
56100
6233
63600
7067
100.75
19.50
29.25
3685
Bleed
Arrangement 1
Arrangement 2
Arrangement 3
Arrangement 4
Size
# of Cells
Width (ins)
Weight (lbs)
Size
# of Cells
Width (ins)
Weight (lbs)
Size
# of Cells
Width (ins)
Weight (lbs)
Size
# of Cells
Width (ins)
Weight (lbs)
Height (ins)
1-10
10
29.88
845
2-10
20
59.31
1500
3-10
30
88.94
2135
4-10
40
118.38
2780
51.25
1-11
11
29.88
919
2-11
22
59.31
1628
3-11
33
88.94
2315
4-11
44
118.38
3015
56.25
1-12
12
29.88
993
2-12
24
59.56
1756
3-12
36
89.19
2495
4-12
48
118.38
3250
61.25
1-13
13
30.06
1067
2-13
26
60.00
1884
3-13
39
89.81
2675
4-13
52
119.19
3485
66.25
1-14
14
30.31
1141
2-14
28
60.19
2012
3-14
42
90.31
2855
4-14
56
120.03
3720
71.25
1-15
15
30.50
1215
2-15
30
60.56
2140
3-15
45
90.44
3035
4-15
60
120.88
3955
76.25
1-16
16
30.69
1289
2-16
32
60.94
2268
3-16
48
91.38
3215
4-16
64
121.69
4190
81.25
1-17
17
30.91
1363
2-17
34
61.44
2396
3-17
51
92.12
3395
4-17
68
122.44
4425
86.25
1-18
18
31.09
1437
2-18
36
61.75
2524
3-18
54
92.62
3575
4-18
72
123.22
4660
91.25
1-19
19
31.28
1511
2-19
38
62.19
2652
3-19
57
93.19
3755
4-19
76
123.94
4895
96.25
1-20
20
31.53
1585
2-20
40
62.62
2780
3-20
60
93.88
3935
4-20
80
125.00
5130
101.25
1-21
21
31.88
1659
2-21
42
63.31
2908
3-21
63
94.94
4115
4-21
84
126.38
5365
106.25
1-22
22
32.25
1733
2-22
44
64.06
3036
3-22
66
96.06
4295
4-22
88
127.75
5600
111.25
1-23
23
32.59
1807
2-23
46
64.81
3164
3-23
69
97.19
4475
4-23
92
128.12
5835
116.25
1-24
24
32.94
1881
2-24
48
65.50
3292
3-24
72
98.19
4655
4-24
96
130.50
6070
121.25
1-25
25
33.31
1955
2-25
50
66.25
3420
3-25
75
99.31
4835
4-25
100
132.25
6305
126.25
1-26
26
33.66
2029
2-26
52
66.88
3548
3-26
78
100.31
5015
4-26
104
133.56
6540
131.25
1-27
27
34.03
2103
2-27
54
67.69
3676
3-27
81
101.50
5195
4-27
108
135.00
6775
136.25
1-28
28
34.38
2177
2-28
56
68.31
3804
3-28
84
102.44
5375
4-28
112
136.38
7010
141.25
Data Notes 1. Clean airflow plus bleed airflow equals inlet flow. 2. See how to calculate bleed air below. 3. Consult charts on page 4 for other capacity and resistance data. 4. Airflow per cell below 450 cfm (765m3/h) (clean) is not recommended. 5. Based on standard air. If temperature and or pressure are different use correction factors as follows; Performance curves as published herein are based on a standard temperature of 70 F (21 C) and a specific gravity of dust of 2.54. Variations from these "standards" may affect efficiency. Temperatures exceeding 250F (121 C) may require the use of stainless steel construction for optimum performance. For operating temperatures exceeding 500F (260 C), contact your Camfil Farr representative. The charts on page 4 show that as temperature increases, and/or specific gravity decreases, the air cleaner treats the dust as if particles were smaller.
Model Description
How to calculate bleed air:
Bleed air volume is 11.1% of the clean air requirement. For example, bleed airflow for a clean air volume of 1000 cfm is 110 cfm. 1000 cfm (1700 m3/h) X .111 (11.1%)
1DV
BL Bleed on Left Side BL - Bleed on Left Side BR - Bleed on Right Side BC - Bleed at Bottom Center
= 111 cfm (187 m3/h)
Three Cells Wide
On suction systems, the static pressure requirement for the bleed air fan will be the sum of (1) the losses of the intake system (ie: louvers, screens, transitions, elbows, etc.) up to the inlet of the Dynavane, (2) the inlet to outlet resistance of the Dynavane, and (3) the losses in the bleed air ducting. Note: Intake system loss calculations should be based on inlet airflow, which is the sum of the clean and bleed airflow. In the example above, it would be 1110 cfm.
Single Cell High Models
1 DV - Single Cell 2 DV - Double Cells 3DV - Triple Cells Note: See table on page 6 for 1DV, 2DV, and 3DV, Dynavane dimensions.
How to size Dynavanes:
On the pages 6 and 7, the various Dynavane configurations are listed. A few simple steps will provide the information needed to select the one best suited to your installation. 1. Determine the airflow required and the airflow resistance acceptable to the application. 2. On the charts on pages 6 and 7, look up the Dynavane model which will provide the necessary airflow at the resistance selected. 3. Various sizes (example: six single-cell or three double-cell) meet similar airflow requirements. After comparing the dimensional information, order the model which fits the applications space requirements. 7
Dynavane
SPECIFICATIONS
Air cleaners shall be Camfil Farr Dynavane
inertial separators They shall be factory fabricated and assembled. Each air cleaner shall consist of a housing, a bleed air manifold, cell bodies, blade packs, bullnoses, and inlet screen. All finished components are primed and finished with a top coat of gray enamel. The Dynavane shall consist of one or more cells depending on airflow and resistance requirements. Individual cells shall include two removable blade packs and have a maximum center-to-center (width) dimension of 5 (127 mm) and shall be 24 (610 mm) in length. HOUSING Housings shall be constructed of not less than 11-gauge steel. The housing shall be of all welded construction and equipped with continuous standing flanges around the periphery of both the air entering and the air exiting sides. Flanges shall have pre-drilled bolt holes to facilitate field installation. BLEED AIR MANIFOLD Housings shall be equipped with a bleed air manifold constructed of not less than 11-gauge steel all welded steel construction and equipped with continuous standing flange with pre-drilled bolt holes to facilitate field connection. Manifolds shall be sized to provide uniform airflow through each cells dust bin for proper balance and dust removal. BLADE PACKS - Blade packs shall be constructed of not less than 20-gauge steel with Heli-arc welded construction. Blade pack vanes shall be individually formed and welded. Vanes shall be arranged to provide a circuitous path to the air flow and redirect the air toward the clean air outlet. The air passageway between adjacent blades shall have a minimum width of 0.19 (4.83 mm). Blade packs shall be removable to allow for inspection or service.
Camfil Farr has a policy of uninterrupted research,
development and product improvement. We reserve the right to change designs and specifications without notice. Camfil Farr, Inc. United States Tel: (973) 616-7300 Fax: (973) 616-7771 Canada Tel: (450) 629-3030 Fax: (450) 662-6035 E-mail: camfilfarr@camfilfarr.com Camfil Farr
aerodynamically formed of 16-gauge steel to provide proper air entry. One bullnose will be required for each two blade pack to properly direct air to each tapered cell. Bullnose clamps shall be constructed of 0.19 (4.83 mm) steel and shall be retained by 5/16 threaded stock welded to the center divider. Center dividers shall be constructed of 16-gauge steel. BLEED SLOT Bleed slots shall be an integral part of each dust bin. The bleed slot/dust bin shall be constructed of not less than 16-gauge steel. The bleed slot shall have a rounded entry configuration to minimize obstruction or plugging under heavy dust concentrations. INLET SCREEN Inlet screens shall consist of a 26-gauge, four-mesh, galvanized hardware cloth integrally supported by a double layered 16gauge galvanized steel frame. Inlet screens shall be bolted to the Dynavane housing. EFFICIENCY When tested in accordance with the general requirements outlined in SAE J726, the Camfil Farr Dynavane air cleaner efficiency shall not be less than 93% on Standardized Coarse Air Cleaner Test Dust at a clean airflow rate of 1000 CFM (1700 m3/h) per single cell using a bleed rate equaling 10% of inlet airflow. Inlet to clean air outlet resistance shall not exceed 1.20" w g. (0.30 kPa) at 1000 CFM (1700 m3/h) clean airflow.
