Pocket Loox 700 Series: Handheld Easyguide

Handheld
EasyGuide
Pocket LOOX 700 Series
English
Are there ...
... any technical problems or other questions which you would like to be clarified?
Please contact:
our Hotline/Help Desk

(see the included Help Desk list or go to: www.fujitsu-siemens.com/helpdesk)
your sales partner
your sales outlet

Further information can be found in the "Safety" and "Warranty" manuals.
The latest information on our products, tips, updates, etc., can be found on the internet under:
www.fujitsu-siemens.com
This manual was produced by

cognitas. Gesellschaft fr Technik-Dokumentation mbH www.cognitas.de
Published by
Fujitsu Siemens Computers GmbH
AG 08/05
Edition 1
Order no.: A26391-K167-Z120-1-7619
Introduction
Important notes
Pocket LOOX 700 Series
Operating the Pocket PC
Configuring the Pocket PC
Operating Manual
Connecting and
networking the Pocket-PC
Troubleshooting and tips
Technical data
Index
August 2005 edition
Adobe and Acrobat are trademarks of Adobe systems Incorporated and may be protected in
certain countries.
Intel is a registered trademark, XScale is trademark of Intel Corporation, U.S.A.
Microsoft, Windows and ActiveSync are registered trademarks of the Microsoft Corporation.
Windows Mobile is a trademark of Microsoft Corporation.
The SD Logo is a trademark of Secure Digital.
The Bluetooth trademarks are the property of Bluetooth SIG, Inc., U.S.A. licensed for Fujitsu
Siemens Computers GmbH.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright Fujitsu Siemens Computers GmbH 2005
All rights, including rights of translation, reproduction by printing, copying or similar methods,
in part or in whole, are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
Contents
Your Pocket LOOX... .......................................................................................................................... 1
Notational conventions ......................................................................................................................... 2
Software overview ................................................................................................................................ 3
Important notes .................................................................................................................................. 5
Safety notes.......................................................................................................................................... 5
Underway with the Pocket PC .............................................................................................................. 6
Transporting Pocket PC ............................................................................................................... 6
Using the Pocket PC ............................................................................................................................ 6
Cleaning Pocket PC ............................................................................................................................. 7
Disposal and recycling.......................................................................................................................... 7
Liability.................................................................................................................................................. 7
CE marking........................................................................................................................................... 8
Operating the Pocket PC ................................................................................................................... 9
Overview of operating elements and connections................................................................................ 9
Initial start-up ...................................................................................................................................... 12
Inserting battery.......................................................................................................................... 12
Connecting PSC11R-050 mains adapter ................................................................................... 14
Installing ActiveSync on your PC/notebook................................................................................ 16
Starting Pocket PC the first time ................................................................................................ 17
First data synchronisation between the Pocket PC and the PC/notebook ................................. 18
Switching Pocket PC off and on ......................................................................................................... 18
Switching Pocket PC off and on during normal use ................................................................... 18
Switching on and off with soft reset (warm boot)........................................................................ 19
Resetting the Pocket-PC (Cold start) ......................................................................................... 19
Resetting Pocket PC to delivered state...................................................................................... 21
Using standard operating elements.................................................................................................... 22
Using the pen ............................................................................................................................. 22
Using navigation key .................................................................................................................. 22
Using scroll button...................................................................................................................... 22
Using the application buttons ..................................................................................................... 23
Switching display lighting off and on................................................................................................... 23
Operating camera............................................................................................................................... 24
Inserting and removing expansion cards............................................................................................ 25
Inserting and removing SD/MMC cards ..................................................................................... 25
Inserting and removing CompactFlash cards............................................................................. 27
Using Pocket PC as USB Host device ............................................................................................... 28
On the road with the Pocket PC ......................................................................................................... 29
Charging the battery ................................................................................................................... 29
Optimising battery operating time............................................................................................... 33
Synchronising data with ActiveSync................................................................................................... 34
Connecting Pocket PC to PC/notebook ..................................................................................... 34
Synchronising data with new PC/notebook ................................................................................ 35
Using the cradle.................................................................................................................................. 35
Selecting location for cradle ....................................................................................................... 35
Using cradle for data synchronisation ........................................................................................ 36
Charging additional battery in cradle .......................................................................................... 37
A26391-K167-Z120-1-7619, edition 1
Contents
Configuring the Pocket PC...............................................................................................................39

Optimising energy management .........................................................................................................39
General information on energy management .............................................................................39
Using energy-saving functions....................................................................................................40
Adjusting menus .................................................................................................................................41
Password protection............................................................................................................................41
Configuring hardware buttons .............................................................................................................42
FSC KeyLock: preventing switch-on via application buttons ......................................................42
Assigning chosen functions to the hardware buttons..................................................................42
Connecting and networking the Pocket PC with other devices ...................................................43
Wireless data transfer with infrared interface......................................................................................43
Wireless connection via Wireless LAN ...............................................................................................43
Wireless communication with Bluetooth .............................................................................................44
Selecting location for Bluetooth operation ..................................................................................44
Activating and deactivating Bluetooth .........................................................................................44
Troubleshooting and tips .................................................................................................................45
Installing new software................................................................................................................45
Date or time of the Pocket PC is incorrect ..................................................................................45
The display of the Pocket PC remains dark................................................................................45
The display is hardly readable ....................................................................................................45
The Pocket PC switches off ........................................................................................................45
The Pocket PC does not start after switch on.............................................................................46
The Pocket PC stops working.....................................................................................................46
The battery discharges too quickly .............................................................................................46
The Suspend/Resume button does not respond properly ..........................................................47
No sound or minimal volume ......................................................................................................47
Contact with hotline/help desk ....................................................................................................47
Technical data ...................................................................................................................................49
Pocket PC ...........................................................................................................................................49
Battery (Li-Ion) ....................................................................................................................................50
PSC11R-050 mains adapter ...............................................................................................................50
Index...................................................................................................................................................51
A26391-K167-Z120-1-7619, edition 1
Your Pocket LOOX...

... is equipped with the Office applications Microsoft Word, Excel and Outlook. In Outlook you cannot
only receive and send mails, but also manage your appointments and be reminded of your tasks.
You can access names, e-mail addresses and telephone numbers while you are away from your
home or office. You can store notes in written form or verbally as with a dictation device. Memory
cards ensure that even large amounts of data can be carried along reliably.
Install ActiveSync on your notebook or PC, connect the Pocket LOOX to your notebook or PC and you
can synchronise your data. In the office you can then effortlessly transfer all your data and newly
created documents to your notebook or PC.
With the optional USB Host line you can use your Pocket LOOX as a USB Host device. You can
connect different USB devices, such as a MEMORYBIRD, to the Pocket PC.
Read your favourite book quite comfortably away from home on the display or use the MP3 player.
Insert the memory card of a digital camera in the slot and you can view the photos on the display. On
a Pocket LOOX with an integrated camera you can take photos directly with the Pocket LOOX and
view them immediately on the display.
With Bluetooth, infrared and wireless LAN you can establish a connection to other devices at the
office and away from it without bothersome cables. For example, you can access the Internet using
the Pocket LOOX with Bluetooth via your Bluetooth-capable mobile phone. You can call up both web
and WAP pages with the Internet Explorer Mobile.
The following documentation contains additional information on your Pocket PC and the Windows
Mobile operating system:
in the manuals "Safety" and "Warranty"
in the help on your Pocket PC
in the files on the Microsoft Getting Started CD (e.g. *.TXT, *.PDF)
A26391-K167-Z120-1-7619, edition 1
Notational conventions
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
i
Pay particular attention to texts marked with this symbol. Failure to observe
this warning may endanger your life, destroy the system, or lead to loss of
data. Failure to follow the instructions may lead to loss of data, invalidate
your warranty, destroy the Pocket PC, or endanger your life.
Indicates important information which is required to use the system properly.
Text which follows this symbol describes activities that must be performed in
the order shown.
This font
indicates programme names, commands, or menu items.
"Quotation marks"
indicate names of chapters, data carriers, and terms that are being
emphasised.
A26391-K167-Z120-1-7619, edition 1
Software overview
Software overview
The following table provides an overview of the most important programs which are already installed
on your Pocket PC and where you can find information on using these programs.
Software
Used for
Operating information
Word Mobile
For word processing
Help file on Pocket PC
Excel Mobile
For spread-sheet functions
Outlook Mobile
Contacts/calendar//things to do
PowerPoint Mobile
Opening and displaying presentations

that were created on a PC.
ActiveSync
For data synchronisation
Help file on the notebook or

PC on which you installed
ActiveSync
Internet Explorer Mobile
Browser for websites and WAP sites
Windows Media
PlayerMobile 10
For playing audio and video files
camera
For photos and short video clips.

(requirement: Pocket LOOX with
camera)
Help file on the Pocket-PC and

user manual on the Microsoft
Getting Started CD
FSC SpeedMenu
Quick start menu for simplifying daily

procedures. Adapt the menu to your
needs. Support for one-handed
operation

user manual "Pocket LOOX
Software Suite" on the
Microsoft Getting Started CD
CONNECTMOBILITY-E2C
Connection manager for efficient

management and control of complex
Internet and Intranet connections.
Automates and minimizes user
actions.

Supports, e.g. bluetooth, wireless LAN

und infrared (IrDA, CF)
FSC Voice Recorder
Brings real Dictaphone functionality

to the Pocket LOOX

FSC Audio Path
Comfortable operation of the multiple

active audio outputs on the Pocket
LOOX

A26391-K167-Z120-1-7619, edition 1
Software overview
Software
Used for
Operating information
FSC Panning
Problems when scrolling in the Internet Help file on the Pocket-PC and
Explorer Mobile?
FSC Panning quickly brings window
contents into view. Especially useful
on large websites.
FSC KeyLock
Protects against accidental starting of

the Pocket-PC when a key is pressed.

FSC Password
Protection against theft permanent

passwords for protecting against
misuse.

Patented solution
FSC Backup
Partial and full data backup on

external memory modules (if
available)

A26391-K167-Z120-1-7619, edition 1
Important notes
This chapter contains safety notes and important information you must observe when using your
Pocket PC.
This Pocket PC complies with the relevant safety regulations for data processing equipment. If you
have questions as to whether you can set up the cradle and the Pocket PC in the intended
environment, please contact your sales point or our hotline/help desk.
Safety notes
Observe the safety notes in the "Safety" manual and the following safety notes to prevent
damage to your device, data loss or injuries.
During installation and before operating the device, observe the instructions on environmental
conditions in the "Technical data" chapter.
Connect the mains adapter plug to the PSC11R-050 mains adapter. The mains adapter plug
must never be plugged into an electrical outlet without the PSC11R-050 mains adapter.
The included PSC11R-050 mains adapter complies with the requirements of the country in
which you purchased the Pocket PC. Make sure the PSC11R-050 mains adapter is approved
for the country in which it is used.
The PSC11R-050 mains adapter may only be connected to an electrical outlet when the Pocket
PC or the cradle is connected to the PSC11R-050 mains adapter.
Do not use the PSC11R-050 mains adapter for other devices.
Do not use mains adapters which are not specially approved for this Pocket PC.
You may only operate the Pocket PC with the PSC11R-050 mains adapter if the nominal
voltage of the PSC11R-050 mains adapter (100 V to 240 V) matches the local mains voltage.
When transporting the device on a trip, observe the information in the section "Underway with
the Pocket PC".
The high transmitting power of the consumer infrared interface (CIR) may cause technical
problems for infrared devices (e.g. mobile phone, PDA) which are not suitable for CIR or are
too close to the transmitter. Before you set up an Infrared data connection to a device such as
a mobile phone or PDA, check that the CIR is not active or not currently being used by another
program.
A26391-K167-Z120-1-7619, edition 1
Important notes
Underway with the Pocket PC

Observe the following information when you travel with your Pocket PC.
Transporting Pocket PC
Switch the Pocket PC off.
Disconnect the cables from the Pocket PC.
If the device needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.
Use the pouch for transporting the Pocket PC that provides protection against jolts and impacts
(the protective pouch is available as an accessory).
Protect the Pocket PC from severe shocks and extreme temperatures (e.g., direct sunlight in a
car).
If you wish to use your Pocket PC during a flight, check first with the airline if this is allowed and
under which conditions.
In some countries the use of Bluetooth is restricted or completely prohibited. Ask about the
regulations in the country you will be travelling in before starting your trip. As a precaution,
switch Bluetooth off in case there is any uncertainty at your place of residence.
If you are travelling abroad, ensure that the PSC11R-050 mains adapter can be operated with
the local mains voltage. Do not use any other voltage converter!
If you use a modem, incompatibilities with the local telecommunications system may result.
Using the Pocket PC

Store the Pocket PC in a fully charged state in a dry environment. If you store the Pocket PC for up
to a month, the storage temperature should be between -20C and +60C. If you store the Pocket PC
for up to three months, the storage temperature should be between -20C and +45C. The lower the
temperature at which the batteries are stored, the lower is the rate of self-discharge.
Avoid leaving your Pocket PC lying in direct sunlight in a car. The temperature could
exceed the permissible 60C in such cases!
To protect the battery, battery charging is interrupted at excessively high temperatures
(over 48C).
Please note that batteries discharge themselves over time. Therefore, recharge the battery of your
Pocket PC at regular intervals during the storage period.
Protect the slots for expansion cards and the ActiveSync connection of the Pocket PC from soiling.
Soiling can lead to contact problems.
A26391-K167-Z120-1-7619, edition 1
Important notes
Cleaning Pocket PC
Pull the PSC11R-050 mains adapter out of the electrical outlet.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Please ensure that no liquid enters the Pocket PC.
The device surface can be cleaned with a dry cloth.

If it is very dirty, you can clean the device and the display with a damp cloth.
Disposal and recycling

You will find further information about country-specific recycling and disposal options in the Internet
under www.fujitsu-siemens.com/recycling or on the Microsoft Getting Started CD.
Liability
Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising
from unauthorised changes made to this device. Fujitsu Siemens Computers is, furthermore, not
responsible for replacing and / or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and/or exchanging
devices.
A26391-K167-Z120-1-7619, edition 1
Important notes
CE marking
0470
Products bearing the CE marking comply with the R&TTE Directive

(1999/5/EC), EMC Directive (89/336/EEC), and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European Community.
CE compliance of this computer is valid only if powered with an Fujitsu Siemens Computers-provided
CE marked AC Adapter. Compliance with these directives implies conformity to the following
European Norms (in parentheses are the equivalent international standards and regulations):
EN 55022 (CISPR 22) Electromagnetic Interference

EN 55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) Electromagnetic Immunity
EN61000-3-2 (IEC61000-3-2) Power Line Harmonics
EN61000-3-3 (IEC61000-3-3) Power Line Flicker
EN 60950 (IEC 60950) Product Safety
ETS 300 328-2 Technical requirements for 2.4 GHz radio equipment
EN 301 489-1, -17 General EMC requirements for radio equipment
The IEEE 802.11b wireless LAN and Bluetooth functionality of this product may be used in the
following EU, EU candidate, and EFTA countries: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxemburg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain,
Sweden, Switzerland, and United Kingdom.
If you are not sure whether the use of Bluetooth is permitted in your country, please contact the
corresponding supervisory authorities.
The user is responsible for radio interference that may occur when operating the device.
For IEEE 802.11b wireless LAN operation of this product, only a limited band is available in France
(Channels 10, 11, 12, and 13 only). l'Autorit de rgulation des tlcommunications (ART) has
special regulations for hotspots allowing other channels, too.
Please check with ART (http://www.art-telecom.fr) on this for local rulings and for authorization.
A26391-K167-Z120-1-7619, edition 1

In this section you will find a description of the operating controls of your Pocket-PC and how you
operate the Pocket-PC.
Please take note of the information in the "Important notes" chapter.
Overview of operating elements and connections

1 2
1=
2=
3=
3 4 5
15
14
6
13
4=
5=
6=
7=
8=
9=
10 =
11 =
12 =
13 =
14 =
15 =
Wireless indicator
Infrared interface
Loudspeaker for VoIP
(Voice over IP, optional)
Power-on indicator (battery)
Suspend/Resume button
Display
Loudspeakers
CONNECTMOBILITY-E2C button
Today button
Navigation key
Contacts button
Calendar button
FSC SpeedMenu button
Scroll button
Mounting point for wrist strap
12 11 10 9 8
A26391-K167-Z120-1-7619, edition 1
5
6
7
10
13 12 11
9
1=
2=
3=
4=
5=
6=
7=
10
Pin
Slot for SD/MMC cards
Slot for CompactFlash cards
Headphones port
Camera flash (optional)
Camera lens (optional)
Mirror for self-portrait (optional)
8=
9=
10 =
11 =
12 =
13 =
Battery compartment cover

Release
Record button
ActiveSync port
Opening for soft reset (warm boot)
Microphone
A26391-K167-Z120-1-7619, edition 1
1
1=
2=
Connection for Pocket PC

Power-on indicator for additional battery
A26391-K167-Z120-1-7619, edition 1
2
3=
4=
Slot for additional battery

ActiveSync port
11
Initial start-up
Please follow the sequence of these steps! Before the first data synchronisation
between your Pocket PC and your PC/notebook, you must install the program ActiveSync
on your PC/notebook.
In just a few steps your Pocket PC is ready to use the first time:
Inserting battery
Connecting PSC11R-050 mains adapter
Install ActiveSync on the PC/notebook
Starting Pocket PC the first time
Start the initial data synchronisation between the Pocket PC and the PC/notebook
You will learn more about the individual steps in the following sections.
Inserting battery
2
3
Press the release (1) in the direction of the arrow and hold it pressed.
Lift the cover (2) and pull the cover off the Pocket PC.
Push the slide (3) in the direction of the arrow.
12
A26391-K167-Z120-1-7619, edition 1
5
8
6
Lay the battery in the battery compartment (4 +5). Watch the contact connections.
Push the slide (6) in the direction of the arrow.
Position the cover on its slot in the direction of the arrow (7).
Carefully flap the cover down (8) until you feel it latch in place.
Therefore, charge the battery for 12 hours before the first mobile use (see "Connecting
PSC11R-050 mains adapter").
When you replace the battery, an internal backup battery prevents unsaved data from
being lost. This backup battery can buffer the data for up to 30 minutes. The buffer time is
dependent on the charging level of the backup battery.
A26391-K167-Z120-1-7619, edition 1
13
Connecting PSC11R-050 mains adapter
Please take note of the safety information in the "Important notes" chapter.
You can connect the PSC11R-050 mains adapter to the Pocket PC (for instructions on how to
connect the mains adapter to the cradle, please read the section "Using the cradle").
14
Slide the suitable mains adapter plug into the PSC11R-050 mains adapter in the direction of
the arrow until it engages.
A26391-K167-Z120-1-7619, edition 1
Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC.
Connect the mains adapter cable (2) to the DC socket of the ActiveSync cable.
Connect the PSC11R-050 mains adapter (3) to an electrical outlet.
The installed battery will now be charged. The power-on indicator flashes orange.
Please note that:

Do not connect your Pocket PC to your computer (PC/notebook) yet. Before the first data
synchronisation between your Pocket PC and your PC/notebook, you must install the
program ActiveSync on your PC/notebook.
A26391-K167-Z120-1-7619, edition 1
15
Installing ActiveSync on your PC/notebook

The data synchronisation helps you always keep your data on your Pocket PC and your
PC/notebook up to date when you work alternately with your PC/notebook and your Pocket PC.
The ActiveSync cable and the ActiveSync software are provided for data synchronisation. ActiveSync is
already installed on your Pocket PC. You need only install ActiveSync on your PC or notebook.
you will find the program ActiveSync and the necessary driver on the Microsoft Getting Started CD.
Insert the Microsoft Getting Started CD in the optical drive of your PC/notebook.
The installation program of ActiveSync will start.
If the installation program of ActiveSync does not start automatically, you must double-click on
the file Setup.exe of ActiveSync.
Follow the instructions on the screen.
Prepare the Pocket PC as described in the section "Starting Pocket PC the first time".
During the installation the software attempts to establish a connection to the Pocket PC.
If you have not yet installed Outlook on your PC/notebook, you must install it on your
PC/notebook before the first data synchronisation between your Pocket PC and your
PC/notebook. You will find Outlook on the supplied Microsoft Getting Started CD.
Connect the ActiveSync cable to a USB port (1) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your
Pocket PC and your PC/notebook will be established.
16
A26391-K167-Z120-1-7619, edition 1
Starting Pocket PC the first time
2
1
Press the Suspend/Resume button (1) to switch on the Pocket PC.
Pull out the pen (2) in the direction of the arrow.
Adjusting touchscreen
The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC
reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the
initial start-up.
Touch the centre of the cross hairs that appears on the display with the stylus. This procedure must
be repeated several times, whereby the cross hairs appear at different locations on the display each
time. Follow the instructions on the display.
Becoming familiar with basic operation
Next the operating system provides a brief introduction to the operation of the Pocket PC with the
stylus after the initial start-up.
Follow the instructions on the display.
Today screen
Following the introduction the Today screen appears. The Today screen shows all important current
information at a glance. From this screen you have access to all programs and to the system
settings.
Please also use the help function that is available on your Pocket PC if you want to know
more about operating the programs contained in the operating system.
A26391-K167-Z120-1-7619, edition 1
17
First data synchronisation between the Pocket PC and the

PC/notebook
After you have specified the desired and required settings for synchronisation in the ActiveSync
Setup Wizard, the first synchronisation starts automatically.
Switching Pocket PC off and on

Switch the Pocket PC on or off with the Suspend/Resume button. After certain applications or the
installation of new programs, it may be necessary to restart the Pocket PC with the soft reset. It is
only necessary in seldom, exceptional cases to reset the Pocket PC to the delivered state.
Switching Pocket PC off and on during normal use

Switching off with Suspend/Resume button
Briefly press the Suspend/Resume button to switch off the Pocket PC.
The Pocket PC is switched to suspend mode.
If you have specified a switch-off time with the system settings, your Pocket PC will
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:

Switching on with Suspend/Resume button
Briefly press the Suspend/Resume button to switch on the Pocket PC.
Switching on with application buttons

By default, you can also switch your Pocket PC on by briefly pressing one of the application buttons.
The applications assigned to the respective button appears on the screen.
18
With the appropriate setting in FSC KeyLock you can prevent the Pocket-PC being started
by pressing the application button.
A26391-K167-Z120-1-7619, edition 1
Switching on and off with soft reset (warm boot)

After certain applications or the installation of new programs, it may be necessary to restart the
Pocket PC with the soft reset.
Unsaved data is lost. Shut down all programs before you restart the Pocket-PC.
Take the stylus and screw it apart (1).
Briefly press the tip (2) into the soft reset opening.
The warm boot is carried out.
Resetting the Pocket-PC (Cold start)

If your Pocket-PC locks up and switching it on and off with the suspend/resume button and soft reset
has no effect, you can reset your Pocket-PC.
Unsaved data is lost. Shut down all programs before you reset the Pocket-PC.
A26391-K167-Z120-1-7619, edition 1
19
Simultaneously press the tip (2) into the soft reset opening and the Suspend/Resume
button (2).
20
A26391-K167-Z120-1-7619, edition 1
Resetting Pocket PC to delivered state
When you reset your Pocket-PC to the delivered state, you lose all data (documents,
additionally installed programs, personal settings) that you have not saved elsewhere.
Save your data at regular intervals (memory card, FSC Backup).
If you have set a password with FSC Password and marked it as permanent, the password
remains intact.
2
2
Simultaneously press the tip (2) into the soft reset opening, the suspend/resume button (2) and
the calendar button (2).
Hold the suspend/resume button (2) and the calendar button (2) pressed for a few seconds.
The reset can take a few minutes. A signal is sounded after the reset is complete. Please follow the
further instructions on the display.
A26391-K167-Z120-1-7619, edition 1
21
Using standard operating elements

Using the pen
Briefly touch the desired element on the display with the stylus to trigger an action.
To activate popup menus, also touch the desired element with the stylus, however leave the
stylus on the element for a moment: the popup menu appears and you can select an element
by touching it.
Using navigation key

With the navigation key (1) you scroll within the
menus (up, down, to the left and right) and
activate menu entries by pressing the centre of
the navigation key.
Using scroll button
1
2
With the scroll button you can scroll up or down, forward or backward (1, 2) within the menu. You
activate menu entries by pressing the scroll button in the centre position (3).
22
A26391-K167-Z120-1-7619, edition 1
Using the application buttons

1=
2=
3=
4=
4
3
CONNECTMOBILITY-E2C button
Today button
Contacts button
Calendar button
1
2
With the application buttons and the appropriate preset (see chapter "Configuring the Pocket PC"),
you can open your preferred programs and applications directly from suspend mode or from within
an application.
On delivery, the four buttons are assigned to the applications Contact, CONNECTMOBILITY-E2C,
Calendar and the Today screen.
Because the application button react differently to short or long keystrokes you can assign a total of
eight different programmes or applications to the application buttons.
Switching display lighting off and on

1
If the ambient light conditions permit, you can

switch the display lighting off or reduce its
brightness to save energy. You can also specify
the switching off and on again of the display
lighting in the system settings of your Pocket PC
(see the "Configuring the Pocket PC" chapter).
A26391-K167-Z120-1-7619, edition 1
Press the Suspend/Resume button (1) for

longer than 1 second to switch the display
lighting on or off.
23
Operating camera
Depending on the model, your Pocket PC is equipped with a camera. The camera has three
photographic functions:
Photo
Film
Photo with background picture
You can start the camera in two different ways:
Press the FSC SpeedMenu button of the workstation for approx. 2 seconds.
or
Select the Camera menu under Start.
2
3
1
5 6
1=
2=
3=
4=
24
Shutter release
Flash
Lens
Mirror for self-portrait
5=
6=
Navigation key as selection keys for

desired photographic function
Shutter release
For instructions on operating the camera, see the camera manual. You will find this
manual on the Microsoft Getting Started CD.
A26391-K167-Z120-1-7619, edition 1
Inserting and removing expansion cards

Two slots allow the operation of different expansion cards in your Pocket PC. Possible expansion
cards include memory cards (Type I or II CompactFlash cards and SD/MMC cards), GPS cards,
GSM/GPRS CompactFlash cards and LAN cards.
Only use expansion cards suitable for your Pocket PC.

Observe the manufacturer's instructions when using the expansion cards.
Never use force when inserting or removing an expansion card.
Make sure that no foreign matter gets into the slots.
Inserting and removing SD/MMC cards

A slot is suitable for a memory card of the type "Secure Digital I/O" (SD card) or "MultiMediaCard"
(MMC card).
Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot
somewhat.
Pull the placeholder out of the Pocket PC (2).
Carefully push the memory card (3) into the slot.
A26391-K167-Z120-1-7619, edition 1
25
The memory card can protrude by one to several millimetres (depending on the type of card used).
Keep the placeholder in a safe place. When you remove the memory card again, you
should refit the placeholder. This prevents foreign matter from getting into the slot.
Press on the edge of the storage card (1) so that the storage card jumps out of the slot slightly.
Slide the storage card out of the Pocket PC (2).
Insert the placeholder (3) again into the slot if necessary.
The placeholder protrudes one to two millimetres.
26
A26391-K167-Z120-1-7619, edition 1
Inserting and removing CompactFlash cards

A slot is suitable for a type I or II CompactFlash card.
Pull the placeholder (1) for the CompactFlash card out of the slot.
Carefully push the CompactFlash card (2) with the connection contacts first into the slot until it
is felt to engage.
Keep the placeholder in a safe place. When you remove the CompactFlash card again, the
placehold should be refitted. This prevents foreign matter from getting into the slot.
Pull the CompactFlash card out of the slot (1).
Insert the placeholder (2) again into the slot.
A26391-K167-Z120-1-7619, edition 1
27
Using Pocket PC as USB Host device

With the optional USB Host cable you can use
your Pocket PC as a USB Host device and
connect various USB devices, such as a
MEMORYBIRD, to the Pocket PC.
The USB Host cable is available as an accessory
under the name "Sync Cable USB client/host".
USB devices from Fujitsu Siemens Computers, such as the MEMORYBIRD or the
STORAGEBIRD, can be connected immediately and will be detected as new components
without problems.
If you want to connect other USB devices, ask your dealer whether drivers must be
installed.
The current consumption of the USB device may not exceed 100 mA (at +5 V). USB
devices with a current consumption of more than 100 mA must be supplied with power via
their own power supply.
Connect the USB host cable (1) to the ActiveSync port on the Pocket PC.
Connect the USB device (such as a MEMORYBIRD) to the USB port (2) of the USB Host
cable.
The USB device is now connected to your Pocket PC.

If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 mains
adapter (see "Connecting PSC11R-050 mains adapter").
28
A26391-K167-Z120-1-7619, edition 1
On the road with the Pocket PC

Your Pocket PC is equipped with a powerful battery. When you're on the road your Pocket PC is
supplied with power by the integrated battery. At your home or office you can recharge the battery in
the cradle. You can also take along the PSC11R-050 mains adapter and connect your Pocket PC
directly to an electrical outlet to recharge the battery when you're on the go.
Charging the battery
The battery is not charged on delivery and should be charged for 12 hours prior to the first
mobile use.
The battery charging time is otherwise approx. 4 hours. When the Pocket PC is operating,
the charging time is extended.
You have two ways of doing this:
You can connect the Pocket PC directly to an electrical outlet with the PSC11R-050 mains
adapter.
You can connect the cradle to an electrical outlet with the PSC11R-050 mains adapter and
insert the Pocket PC in the cradle.
In both cases you can work with the Pocket PC during charging. This extends the charging time.
Please take note of the information on the PSC11R-050 mains adapter in the "Connecting
PSC11R-050 mains adapter" section.
Charging battery directly with PSC11R-050 mains adapter

You can connect the PSC11R-050 mains adapter directly to the Pocket PC. There are two ways to
do this:
You can use the ActiveSync cable..

You can use the adapter.
A26391-K167-Z120-1-7619, edition 1
29
Connecting PSC11R-050 mains adapter to Pocket PC with ActiveSync cable
When the battery is fully charged, the power-on indicator lights continuously orange.
30
A26391-K167-Z120-1-7619, edition 1
Connecting PSC11R-050 mains adapter to Pocket PC with adapter
Connect the adapter (1) to the ActiveSync port of the Pocket PC.
Connect the mains adapter cable (2) to the adapter.
A26391-K167-Z120-1-7619, edition 1
31
Charging battery with cradle

There are two ways to connect the PSC11R-050 mains adapter to the cradle:
You can use the ActiveSync cable..

You can use the adapter.
Connecting PSC11R-050 mains adapter to cradle with ActiveSync cable
Connect the ActiveSync cable (1) to the ActiveSync port of the cradle.
Place the Pocket PC in the cradle (4).
32
A26391-K167-Z120-1-7619, edition 1
Connecting PSC11R-050 mains adapter to cradle with adapter
Connect the adapter (1) to the ActiveSync port of the cradle.
Connect the mains adapter cable (2) to the adapter.
Optimising battery operating time

When you have completely charged the battery, you can operate the Pocket PC for up to 12 hours
without a power connection. However, it is not possible to exactly specify the maximum operating
time, as different applications use more or less energy.
In the system settings you can make settings that help you save energy when using your Pocket PC.
These settings enable you to use the battery operating time optimally.
In the default setting, a setting is activated that automatically switches the Pocket PC into
the Suspend mode after three minutes when working without a power connection if no
entries are made during this time. You can switch on the Pocket PC again at any time by
briefly pressing the Suspend/Resume button and then continue working where you left off.
A26391-K167-Z120-1-7619, edition 1
33
Synchronising data with ActiveSync

To also have the current version of the data you have processed on the road on your Pocket PC
available on your PC/notebook, you must copy these data to your PC/notebook. This procedure is
conveniently enabled with data synchronisation:
In the ActiveSync program you can specify that the respective latest version of a file be detected and
then automatically updated on the respective data carrier - regardless of whether it is the Pocket PC
or a PC/notebook.
You can synchronise your data between your Pocket PC and your PC/notebook via the cradle, using
the ActiveSync cable or via infrared, Bluetooth or wireless LAN.
You will find information on how you synchronise data using ActiveSync, in the ActiveSync help file on
your PC/notebook.
If you have not yet installed the ActiveSync program on your PC/notebook, you must install
it on your PC/notebook before the first data synchronisation between your Pocket PC and
your PC/n (see "Initial start-up").
Connecting Pocket PC to PC/notebook

4
Switch your PC or notebook on.
34
A26391-K167-Z120-1-7619, edition 1
Synchronising data with new PC/notebook

If you want to synchronise data with a new PC/notebook, you must first install ActiveSync on this new
PC/notebook and establish a new ActiveSync partnership (see the corresponding explanation in the
section "Initial start-up").
Using the cradle

With the cradle you can charge the battery in the Pocket PC, charge an additional battery and/or
carry out a data synchronisation between the Pocket PC and PC/notebook.
Selecting location for cradle

Place the cradle on a stable, flat and nonslippery surface. In view of the multitude of different finishes
used on furniture, it is possible that the rubber feet of the Pocket PC will mark the surface they stand
on.
The cradle and the PSC11R-050 mains adapter should be at least 200 mm apart.
Keep other objects 100 mm away from the cradle and its PSC11R-050 mains adapter to ensure
adequate ventilation.
The Pocket PC and the cradle should not be subjected to extreme environmental conditions. Protect
the Pocket PC and cradle from dust, moisture and heat.
A26391-K167-Z120-1-7619, edition 1
35
Using cradle for data synchronisation
Before the first data synchronisation between the Pocket PC and the PC/notebook, you
must install the program ActiveSync on your PC/notebook (see "Initial start-up").
Switch your PC or notebook on.
Connect the ActiveSync cable (2) to the ActiveSync port of the cradle.
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 mains
adapter (see "Connecting PSC11R-050 mains adapter").
You can leave the connections between the cradle and PSC11R-050 mains adapter, and
between the cradle and your PC/notebook connected all the time. This means you only
need to place your Pocket PC in the cradle to charge the battery and for data
synchronisation.
You will find more information on data synchronisation in the "Synchronising data with ActiveSync"
section and in the help file on your Pocket PC.
36
A26391-K167-Z120-1-7619, edition 1
Charging additional battery in cradle

The cradle is equipped with a slot in which you can charge an additional battery (additional batteries
ae available as an accessory).
Connect the cradle to an electrical outlet with the mains adapter (see "Charging battery with
cradle").
1
2
Insert the additional battery (1) into the battery slot.

Watch the contact connections.
Press the battery (2) in the direction of the arrow until the battery engages.
The additional battery will now be charged. The indicator (3) lights up orange. When the additional
battery is fully charged, the indicator (3) lights up green.
If the additional battery and the Pocket-PC are plugged into the docking station, both
batteries are charged consecutively.
A26391-K167-Z120-1-7619, edition 1
37

You can already choose from a large number of programs when you use the Pocket PC for the first
time. In addition, proven default settings are defined for the menu structure, energy management,
memory management and security functions.
But, of course, you can add and remove programs and configure the Pocket PC as desired.
You will find out how to use some of the functions (e.g. energy management) in this section.
For information on removing and adding programs, please refer to the documentation from the
software manufacturer and the ActiveSync help file, that you can call at any time after installing
ActiveSync on your notebook/PC.
Optimising energy management

General information on energy management
The battery operating time is considerably dependent on the applications used. Please consider that
a particularly large amount of energy is required to play sound files or make sound recordings.
Therefore, if you want to work for up to 12 hours without a power connection, limit the use of energyintensive applications.
Data exchange with a PC or notebook also consumes additional battery power. Therefore, always
connect your Pocket PC to an electrical outlet during data exchange if possible.
A26391-K167-Z120-1-7619, edition 1
39
Using energy-saving functions

You can save energy in several ways to optimally utilise the battery operating time:
Switch the Pocket PC into the Suspend mode when you are not using it.
Reduce the processor speed.
Switch the display lighting off or reduce the brightness.
Switch off the sound, reduce the volume or only allow acoustic signals for certain
applications.
Switching the Pocket PC into Suspend mode
Select the number of minutes after which the Pocket PC is to switch into the Suspend mode
when it is not used under Start - Settings - System - Power.
Press the Suspend/Resume button to deactivate the Suspend mode.

The Pocket PC returns to the point at which you interrupted your work.
Switching off display lighting
Select the number of minutes after which the display lighting is to be switched off in the battery
mode when the Pocket PC is not used under Start - Settings - System - Backlight.
Reducing brightness
Reduce the display brightness under Start - Settings - System - Brightness.
Switching on the sound and setting the volume
Touch the loudspeaker symbol in the navigation bar.
A popup window for the loudspeaker settings appears.
Set the required volume with the stylus on the regulator slide, or mute the sound.
Touch the display anywhere outside the popup window.
40
A26391-K167-Z120-1-7619, edition 1
Adjusting menus
Frequently used programs appear in the Start menu. You can adjust the Start menu to meet your
needs.
Touch the Menus symbol under Start - Settings - Private.
A list of programs/applications appears.

To remove programs from the Start menu, click in the checkbox of the program. The check mark is
removed from the checkbox.
To add programs to the Start menu, click in the checkbox of the desired program. A check mark
appears in the checkbox.
You can also use the program FSC SpeedMenu as an alternative for fast access to programs and files.
You can quickly and simply adapt FSC SpeedMenu to your requirements. You will find further
information in the help file on your Pocket LOOX and in the user manual "Pocket LOOX Software
Suite" on the Microsoft Getting Started CD.
Password protection
You can protect your Pocket PC from unauthorised access with a password. This makes your data
accessible only to persons who know the password.
Touch the Password symbol under Start - Settings - Private.
Select the type of password you prefer:
A password consisting of four numbers (simple 4-digit password).
A password of alphanumeric characters (a complex alphanumeric password).
Select whether the password is to remain intact if the unit is reset to the delivered state.
If a password has been entered, you will have to enter this password the next time you switch on.
If you have forgotten your password, you can restart your Pocket PC by resetting it to the delivered
state (see "Resetting Pocket PC to delivered state"). If you have decided on a permanent password,
you will have to contact our service (help desk) in this case.
A26391-K167-Z120-1-7619, edition 1
41
Configuring hardware buttons

FSC KeyLock: preventing switch-on via application buttons
By default, your Pocket LOOX starts up if the Suspend button and an application button are pressed.
In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is
pressed.
You will find further information in the help file on your Pocket LOOX and in the user manual "Pocket
LOOX Software Suite" on the Microsoft Getting Started CD.
Assigning chosen functions to the hardware buttons

The buttons of your Pocket PC are assigned certain functions such as running programs. However,
you can change these default settings and assign the buttons the functions of your choice.
Tap Start.
Select the Settings entry in the menu.
Touch the Buttons symbol on the Private tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application
buttons appear in the list twice. This is because you can assign different applications to these
buttons for short and for long keystrokes.
Mark the button in the list for which you want to change the assignment.
Select the program you want to assign to this button from the list below it.
Touch OK (navigation bar) to confirm your setting.
The button is now assigned the desired program.

If you want to change the function of several buttons, we advise you to make a note of the new
functions.
42
A26391-K167-Z120-1-7619, edition 1
Connecting and networking the Pocket

PC with other devices
The Pocket PC offers a wide range of ways to exchange data with other devices or to work in a
network.
You have already become familiar with data synchronisation via ActiveSync and an ActiveSync cable
in the "Synchronising data with ActiveSync" section. You can connect the ActiveSync cable provided
to any PC or notebook equipped with a USB port. An active ActiveSync cable for devices with a
serial port is also available as an accessory.
In addition, the infrared interface, wireless LAN and Bluetooth are available for wireless
communication. With various cards (available as accessories), you can integrate your Pocket PC in
networks and establish a connection to the Internet.
This chapter provides you with information on wireless data transfer
via infrared interface
via wireless LAN
via Bluetooth
Wireless data transfer with infrared interface

The infrared interface (IrDA) permits wireless serial data transfer with up to 115 kbits/s.
For data transfer, you must align the infrared interface of your Pocket PC with that of the partner
device. The devices must not be more than one metre apart. The infrared interface of one device
must be in the range of influence (horizontally approx. 30 and vertically approx. 15 ) of the infrared
interface of the other device.
The infrared interface is simultaneously a consumer infrared interface (CIR). The CIR interface can
transmit over greater distances. As a result, you can also use the Pocket PC as a remote control with
suitable software.
Wireless connection via Wireless LAN

Your Pocket PC is equipped with an integrated wireless LAN. Information on this topic is provided in
the help file on your Pocket PC.
You can also activate and deactivate the integrated Wireless LAN just as you wish.
Touch the WLAN Power symbol under Start - Settings - System.
A26391-K167-Z120-1-7619, edition 1
43
Connecting and networking the Pocket PC with other devices
Wireless communication with Bluetooth

With your Pocket PC with an integrated Bluetooth module you can communicate wirelessly with other
Bluetooth devices, e.g. with another Pocket PC, a notebook or a mobile phone.
In the following sections, you will find out how to put Bluetooth into operation.
The help file for the software on your Pocket PC explains how you operate the software concerned.
Selecting location for Bluetooth operation
We recommend that you use the Pocket PC with the Bluetooth components in a typical
operating environment. Other Bluetooth devices, which you want to communicate with, should
be located at a distance of up to 10 m.
Only install a partner device within the recommended distance. Observe the output power class
of the partner device when doing so. Details are contained in the operating manual of the
partner device.
Use the Pocket PC with the Bluetooth at least 2 m away from other electrical or electronic
systems. If you must use the Pocket PC near a microwave cooker, then maintain a distance of
at least 3 m from the microwave cooker, as the reception is subject to interference with regard
to microwaves.
Should problems result when communicating via Bluetooth because radios or radio devices are
located in the vicinity, then move the Pocket PC to a different location.
Activating and deactivating Bluetooth

You can switch Bluetooth on and off just as you wish.
Tap the Connections tab under Start - Settings and then tap the Bluetooth symbol.
You can switch Bluetooth on and off here.
44
A26391-K167-Z120-1-7619, edition 1

If a fault occurs in your Pocket PC, try to eliminate it with the measures described in this chapter. If
you fail to correct the problem, proceed as follows:
Make a note of the steps and the circumstances that led to the fault. Also make a note of any
error messages displayed.
Contact your sales outlet or our hotline/help desk.
Installing new software

You will find information on installing supplementary programs in the ActiveSync help file that you can
call up after installing ActiveSync on your PC/notebook.
When installing programmes or drivers, important files may be overwritten and modified. You
should make a backup before the installation in order to access the original files if an error
should occur after installation (see "Synchronising data with ActiveSync").
Date or time of the Pocket PC is incorrect
Touch the Clock symbol under Start - Settings - System.
Change the time.

or
Connect your Pocket PC via ActiveSync to your PC/Notebook.
Synchronise data between the Pocket PC and the PC/notebook. The time and date are also
synchronised in the process.
The display of the Pocket PC remains dark

Display lighting is switched off
Press the Suspend/Resume button longer than 1 second.
The display is hardly readable

Reflection
Turn the Pocket PC until you can see the information in the display again.
The Pocket PC switches off

If you operate the Pocket PC too long with only the battery, the Pocket PC switches into the
Suspend mode when the battery charging level is too low.
Connect the PSC11R-050 mains adapter to charge the battery.
Press the Suspend/Resume button.
A26391-K167-Z120-1-7619, edition 1
45
The Pocket PC does not start after switch on

If the Pocket PC does not start after switch on, this may be due to one of the following:
The battery is dead
Charge the battery.
Connect the PSC11R-050 mains adapter to the cradle with the Pocket PC.
Check whether the PSC11R-050 mains adapter is connected correctly to the cradle.
Check whether the power cable is plugged properly into the mains adapter and into the mains
outlet. The indicator on the mains adapter should illuminate.
The battery is charged. The power-on indicator flashes orange.

PSC11R-050 mains adapter is not properly connected
Check whether the PSC11R-050 mains adapter is properly connected to the Pocket PC and
the electrical outlet.
Then switch the Pocket PC on again
The Pocket PC stops working

If the Pocket PC stops working, this may have the following reasons:
An application programme has caused the malfunction
Restart the Pocket PC (see "Switching on and off with soft reset (warm boot)").
or
If the restart does not function, reset the Pocket PC to the delivered state (see "Resetting
Pocket PC to delivered state").
The battery is dead
Connect the PSC11R-050 mains adapter to the Pocket PC to charge the battery.
or
Connect the PSC11R-050 mains adapter to the cradle and insert the Pocket PC in the cradle to
charge the battery.
The battery discharges too quickly

The battery is either too hot or too cold.
Bring the Pocket PC up / down to a normal temperature again.
If the operating time of the battery mode is extremely short, the battery is probably old and should be
replaced. Please contact your dealer for a new battery.
46
A26391-K167-Z120-1-7619, edition 1
The Suspend/Resume button does not respond properly

You have pressed and held the Suspend/Resume button too long to switch the Pocket PC on
or off.
Briefly press the Suspend/Resume button until the Pocket PC switches on or off.
No sound or minimal volume

Check whether the volume is set correctly.
Touch the loudspeaker symbol in the navigation bar.
A popup window for the loudspeaker settings appears.
Activate the selection field for Off with the stylus.

or
Set the desired volume on the slide control with the stylus.
Contact with hotline/help desk

If you are unable to solve a certain problem, please contact the hotline/help desk. Additional details
are contained in the "Safety" and "Warranty" manuals. Please have the following information ready
when you call:
The model name and serial number of the Pocket PC. The serial number is located on a sticker
on the backside of the Pocket PC.
Notes of any messages that appear on the screen and information on acoustic signals.
Any changes you have made to the hardware or software after receiving the Pocket PC.
Your system configuration and all peripheral devices connected to your system (e. g.
keyboard).
Your sales contract.
A26391-K167-Z120-1-7619, edition 1
47
Technical data
Pocket PC
Processor:
Intel PXA272 with 520 MHz
Main memory:
128 Mbyte RAM

64 MB ROM
Electrical data
Regulations complied with:

CE, FCC Part 15 Class B, EN60950, UL, cUL
Protection class:
III
Maximum power draw:

(Pocket PC on with battery
charging)
10 W
Display
Transflective TFT display:
3.6 inch VGA, 480 x 640 pixels, 65,536 colours
Card slots
1 x slot:
"Secure Digital I/O", "MultiMediaCard"
1 x slot:
CompactFlash
Ports/interfaces
Audio:
Microphone, loudspeaker, headphones (3.5 mm)
Data:
Consumer IrDA, USB 1.1 Slave, USB 1.1 Host, serial (RS232;
supports DTR/DTS), Bluetooth 1.2 Class 2 and Wireless LAN
(IEEE 802.11b)
Environmental conditions
Environment class 3K2, 2K2
DIN IEC 721 EN 60721
Housing class 7M2
DIN IEC 721 EN 60721
Temperature:
Operating (3K2)
Transport (2K2)
5 C .... 40 C
-25 C .... 60 C
A26391-K167-Z120-1-7619, edition 1
49
Technical data
Dimensions
Height/width/depth:
122 mm x 72 mm x 15.2 mm
Weight:
approx. 170 g
Battery (Li-Ion)
Rated capacity:
1640 mAh
Charging time (when not in

operation):
Max. 4 hours
Operating time:
up to 12 hours
up to 350 hours in stand-by mode
PSC11R-050 mains adapter

Primary:
Rated voltage:
Frequency:
100 V to 240 V (automatic)

50 Hz to 60 Hz (automatic)
Secondary:
Rated voltage:
Max. rated current:
5 V 5%
2.0 A 5%
50
A26391-K167-Z120-1-7619, edition 1
Index
A
ActiveSync partnership, establishing 16
ActiveSync port 10
ActiveSync, installing 16
Application button
Calendar button 9
CONNECTMOBILITY-E2C button 9
Contacts button 9
switch on 18
Today button 9
Application buttons, using 23
B
Battery
capacity 6
charging 29
charging with cradle 32
charging with PSC11R-050 power
adapter 29
discharging 46
installing 12
storing 6
technical data 50
Battery operating time, optimising 33
Bluetooth 44
activating 44
deactivating 44
Buffer battery, load 45
C
Calendar button 9
Camera
flash 10
lens 10
mirror for self-portrait 10
CE marking 8
Cleaning 7
CompactFlash card
inserting 27
removing 27
CONNECTMOBILITY-E2C button 9
Contacts button 9
Cradle, using 35
D
Dark display 45
Data synchronisation 34
via cradle 36
A26391-K167-Z120-1-7619, edition 1
Data transfer
Bluetooth 44
infrared 43
Wireless LAN 43
Data, technical 49
Date, not correct 45
Date/Time incorrect 45
Display 9
cleaning 7
difficult to read 45
reflected glare 45
remains blank 45
Display lighting 40
switching off 23
switching on 23
Disposal 7
E
Electromagnetic compatibility 8
Energy management optimising 39
Expansion cards handling 25
F
First start 17
Flash, camera 10
FSC KeyLock 42
H
Hardware keys, configuring 42
Hardware reset 19
Hardware, overview 9
Headphones port 10
Hotline/Help Desk 47
I
Infrared interface 9, 43
Initial start-up 12
first start 17
L
Lens, camera 10
Loudspeaker 9
Loudspeaker for VoIP 9
M
Microphone 10
Mirror for self-portrait, camera 10
51
Index
MMC card
inserting 25
removing 25
MultiMedia Card see MMC card
N
Navigation key 9
using 22
No sound 47
Notational conventions 2
Notes
CE marking 8
cleaning 7
disposal 7
safety 5
O
On/off time 18
Operating, basically 17
Overview
hardware 9
software 3
P
Password protection under Pocket PC
2003 41
Pocket PC
cleaning 7
configuring 39
connecting with other devices 43
connecting with PC/notebook 34
does not start 46
does not work 46
networking 43
operating 9
operating with scroll button 22
switch off 18
switches itself off 45
switching on 17, 18
transporting 6
Power saving possibilities 40
Power-on indicator 9
Preparing for use
basic operation 17
first time 12
installing battery 12
Today screen 17
touchscreen 17
52
PSC11R-050 power adapter

connecting 14
technical data 19, 50
with ActiveSync cable on Pocket
PC 30, 32
with adapter on cradle 33
with adapter on Pocket PC 31
R
Radio indicator 9
Record button 10
Recycling 7
S
Safety 5
Screen too bright 45
Scroll button 9
SD card
inserting 25
removing 25
Secure Digital Memory Card see SD card
Signs and symbols 2
Soft reset 19
Soft reset, opening 10
Software
installing new software 45
new installation 45
overview 3
Sound, switching off 40
Standard operating elements, using 22
Start menu, customising 41
Start-up
connect PSC11R-050 power
adapter 14
Storage, battery 6
Stylus 10
removing 17
using 22
Summer time 45
Suspend mode 18
Suspend/Resume button 9
does not react 47
switching off 18
switching on 18
T
Technical data 49
battery 50
Pocket PC 49
PSC11R-050 power adapter 50
A26391-K167-Z120-1-7619, edition 1
Index
Time
not correct 45
Time, daylight savings 45
Tips 45
Today button 9
Today screen 17
Touchscreen, aligning 17
Transport 6
Troubleshooting 45
V
Volume
controlling 40
minimal 47
W
Warm boot 19
Wireless data transfer 43, 44
Wireless LAN 43
U
Using camera 24
A26391-K167-Z120-1-7619, edition 1
53

Pocket Loox 700 Series: Handheld Easyguide

Uploaded by

Copyright:

Available Formats

Pocket Loox 700 Series: Handheld Easyguide

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pocket Loox 700 Series: Handheld Easyguide

Uploaded by

Copyright:

Available Formats

Handheld

Pocket LOOX 700 Series

Are there ...

our Hotline/Help Desk

your sales partner

your sales outlet

This manual was produced by

Order no.: A26391-K167-Z120-1-7619

Pocket LOOX 700 Series

Operating the Pocket PC

Configuring the Pocket PC

August 2005 edition

Copyright Fujitsu Siemens Computers GmbH 2005

Configuring the Pocket PC...............................................................................................................39

Your Pocket LOOX...

in the manuals "Safety" and "Warranty"

in the help on your Pocket PC

in the files on the Microsoft Getting Started CD (e.g. *.TXT, *.PDF)

indicates programme names, commands, or menu items.

For word processing

Help file on Pocket PC

For spread-sheet functions

Help file on Pocket PC

Help file on Pocket PC

Opening and displaying presentations

Help file on Pocket PC

For data synchronisation

Help file on the notebook or

Internet Explorer Mobile

Browser for websites and WAP sites

Help file on Pocket PC

For playing audio and video files

Help file on Pocket PC

For photos and short video clips.

Help file on the Pocket-PC and

Quick start menu for simplifying daily

Help file on the Pocket-PC and

Connection manager for efficient

Help file on the Pocket-PC and

Supports, e.g. bluetooth, wireless LAN

Brings real Dictaphone functionality

Help file on the Pocket-PC and

FSC Audio Path

Comfortable operation of the multiple

Help file on the Pocket-PC and

Protects against accidental starting of

Help file on the Pocket-PC and

Protection against theft permanent

Help file on the Pocket-PC and

Partial and full data backup on

Help file on the Pocket-PC and

Do not use the PSC11R-050 mains adapter for other devices.

Underway with the Pocket PC

Switch the Pocket PC off.

Disconnect the cables from the Pocket PC.

Using the Pocket PC

Switch the Pocket PC off.

Pull the PSC11R-050 mains adapter out of the electrical outlet.

The device surface can be cleaned with a dry cloth.

in the files on the Microsoft Getting Started CD (e.g. .TXT, .PDF)