Relay of Leadwell

SCHRACK
General Purpose Relays
Power PCB Relay RT2
2 pole 8 A, 2 CO or 2 NO contacts
DC- or AC-coil
Sensitive coil 400 mW
Reinforced insulation
WG version: Product in accordance to IEC60335-1
Applications
Domestic appliances, heating control, emergency lighting,
modems
F0149-C
Approvals
V
REG.-Nr. 6106, Z E214025, b 14385, B C0786
Technical data of approved types on request
Contact data
Contact configuration
2 CO or 2 NO
Contact set
single contact
Type of interruption
micro disconnection
Rated voltage / max. switching voltage AC
250 / 400 VAC
Rated current
8 A, UL: 10 A
Limiting continuous current
8 A, UL: 10 A
Maximum breaking capacity AC
2000 VA
Limiting making capacity, max 4 s, duty factor 10%
15 A
Contact material
AgNi 90/10, AgNi 90/10 gold plated, AgSnO2
Rated frequency of operation DC coil with / without load
6 / 1200 min-1
AC coil with / without load
6 / 600 min-1
Operate- / release time DC coil
max 8 / 6 ms
Bounce time DC coil NO / NC contact
max 4 / 10 ms
Contact ratings
Type
Contact
IEC 61810
RT424 DC coil
RT444 AC coil
RT424 AC coil
UL 508
RT424 DC coil
RT424 DC coil
RT424 DC coil
EN60947-5-1
RTE24 DC coil
RTE24 DC coil
RTE24 DC coil
EN60730-1
RT424 DC coil
Load
Ambient
temp. [C]
Cycles
CO
NO
CO
8 A, 250 VAC, cos=1

8 A, 250 VAC, cos=1
8 A, 250 VAC, cos=1
85C
70C
70C
10x103
50x103
30x103
NO / NC
NO / NC
NO / NC
10 A, 250 VAC, general purpose

1/2 hp, 240 VAC
Pilot duty, B300, R300
85C
85C
85C
20x103
1x103
6x103
NO / NC
NO / NC
NO / NC
AC15, 250 VAC, 3A

DC13, 24 VDC, 2A
DC13, 250V DC, 0.2A
NO / NC
6(2) A, 250 VAC
6.050
6.050
6.050
85C
100x103
Coil data
Rated coil voltage range DC coil
AC coil
Operative range to IEC 61810
Coil insulation system according UL1446
5...110 VDC
24...230 VAC
2
class F
1
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless

otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information only

to be used together with the
'Definitions' section in the catalogue or at schrackrelays.com
in the Schrack section.

Specifications subject to
change.
SCHRACK
Power PCB Relay RT2 (Continued)
Coil versions, DC-coil

Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
c
mW
005
5
3.5
0.5
62+10%
403
006
6
4.2
0.6
90+10%
400
012
12
8.4
1.2
360+10%
400
024
24
16.8
2.4
1440+10%
400
048
48
33.6
4.8
5520+10%
417
060
60
42.0
6.0
8570+12%
420
110
110
77.0
11.0
28800+12%
420
All figures are given for coil without preenergization, at ambient temperature +23C
Other coil voltages on request
Coil versions, AC-coil 50Hz
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
50 Hz
50 Hz
50 Hz
VAC
VAC
VAC
c
VA
524
24
18.0
3.6
350+10%
0.76
615
115
86.3
17.3
8100+15%
0.76
620
120
90.0
18.0
8800+15%
0.75
700
200
150.0
30.0
24350+15%
0.76
730
230
172.5
34.5
32500+15%
0.74
All figures are given for coil without preenergization, at ambient temperature +23C
Insulation
Dielectric strength coil-contact circuit
open contact circuit
adjacent contact circuits
Clearance / creepage coil-contact circuit
Material group of insulation parts
Tracking index of relay base
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
open contact circuit
Rated insulation voltage
Pollution degree
Rated voltage system
Overvoltage category
5000 Vrms
1000 Vrms
2500 Vrms
W 10 / 10 mm
W 3 / 4 mm
IIIa
PTI 250 V
PCB layout / terminal assignment

Bottom view on solder pins
reinforced
micro disconnection
basic
250 V
3
2
240 V
230 / 400 V
III
Other data
Mechanical endurance DC coil
> 30 x 106 cycles
AC coil
> 5 x 106 cycles
Material
RoHS - Directive 2002/95/EC
compliant as per product date code 0413
Resistance to heat and fire, WG version
according EN60335, par30.
Environment
Ambient temperature range
-40...+85C
max. ambient temperature AC coil
70C
max. ambient temperature AgSnO contacts
70C
Vibration resistance (function) NO / NC contact 20 / 5 g, 30 ... 300 Hz
Shock resistance (destruction)
100 g
Category of protection
RTII - flux proof, RTIII - wash tight
Procesing
Mounting
pcb or on socket
Mounting distance DC / AC coil
W 0 / W 2.5 mm
Resistance to soldering heat flux-proof version
270C / 10 s
wash-tight version
260C / 5 s
Relay weight
13 g
Packaging unit
20 / 500 pcs
S0418-CA
*) With the recommended PCB hole sizes a grid

pattern from 2.5 mm to 2.54 mm can be used.
2 CO contacts
S0163-BJ
2 NO contacts
Accessories
For details see datasheet
accessories RT
S0163-BK
2
Datasheet Rev. IJ1
Issued 2009/10

only.


change.
SCHRACK
Power PCB Relay RT2 (Continued)
Dimensions
S0272-BA
Product key
Typical product key
RT
024
Type
RT Power PCB Relay RT2
Version
4 8 A, pinning 5 mm, flux proof
E 8 A, pinning 5 mm, wash tight
Contact configuration
2 2 CO contacts (2 form C)
4 2 NO contacts (2 form A)
Contact material
3 AgSnO2
4 AgNi 90/10
5 AgNi 90/10 gold plated
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
WG
Product in accordance with IEC 60335-1 (domestic appliances)
Preferred types in bold print
Product key
RT423012
RT423024
RT424005
RT424006
RT424012
RT424024 Relay
RT424048
RT424060
RT424110
RT424524
RT424615
RT424730
RT425005
RT425012
RT425024
RT425524
RT425615
RT425730
RT444012
RT444024
RTE24005
RTE24006
RTE24012
RTE24024
RTE24048
RTE24060
RTE24110
RTE24524
RTE24615
RTE24730
RTE25005
RTE25012
RTE25024
Version
8A
pinning 5 mm
flux proof
Contacts
2 CO contacts
Cont. material
AgSnO
Coil
DC-coil
AgNi 90/10
for Leadwell machine
AC-coil
AgNi 90/10
gold plated
DC-coil
AC-coil
2 NO contacts
8A
pinning 5 mm
wash tight
AgNi 90/10
DC-coil
2 CO contacts
AC-coil
AgNi 90/10
gold plated
DC-coil
Coil
12 VDC
24 VDC
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
60 VDC
110 VDC
24 VAC
115 VAC
230 VAC
5 VDC
12 VDC
24 VDC
24 VAC
115 VAC
230 VAC
12 VDC
24 VDC
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
60 VDC
110 VDC
24 VAC
115 VAC
230 VAC
5 VDC
12 VDC
24 VDC
Part number
4-1419136-3
4-1393243-2
5-1393243-9
6-1393243-1
6-1393243-3
6-1393243-8
7-1393243-0
7-1393243-3
7-1393243-5
7-1393243-6
7-1393243-8
7-1393243-9
8-1393243-0
8-1393243-2
8-1393243-5
9-1393243-1
9-1393243-2
9-1393243-3
9-1393243-7
9-1393243-9
1393243-1
1393243-2
1393243-4
1-1393243-0
1-1393243-1
1-1393243-3
1-1393243-4
1-1393243-5
1-1393243-7
1-1393243-8
1-1393243-9
2-1393243-0
2-1393243-1
3
Datasheet Rev. IJ1
Issued 2009/10

only.


change.

Relay of Leadwell

Uploaded by

Copyright:

Available Formats

Relay of Leadwell

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Relay of Leadwell

Uploaded by

Copyright:

Available Formats

SCHRACK

General Purpose Relays

Power PCB Relay RT2

Sensitive coil 400 mW

WG version: Product in accordance to IEC60335-1

8 A, 250 VAC, cos=1

10 A, 250 VAC, general purpose

AC15, 250 VAC, 3A

6(2) A, 250 VAC

Dimensions are in mm unless

processing information only

in the Schrack section.

General Purpose Relays

Power PCB Relay RT2 (Continued)

Coil versions, DC-coil

PCB layout / terminal assignment

*) With the recommended PCB hole sizes a grid

Dimensions are in mm unless

processing information only

in the Schrack section.

General Purpose Relays

Power PCB Relay RT2 (Continued)

Typical product key

for Leadwell machine

Dimensions are in mm unless

processing information only

in the Schrack section.

You might also like