Displacement Transducers

Displacement Transducers
Displacement
Transducers
displacement transucers
displacement transducers
displacement transducers displaceme
transducers
displacement transucers displacement transducers
displacement transducers displaceme
transducers
displacement transucers displacement transucers
displacement transucers
displacement transducers di
displacement transducers displacement transducers
displace
transducers displacement transducers
displacement transduc
displacement transucers displacement transucers
Gefran displacement transducers:

reliability, precision, simple and quick installation
Gefran has designed and produced displacement sensors for over 15 years. Over a million installed transducers and
in-depth knowledge of processes to be measured guarantee top performance and an excellent quality/price ratio.
Gefran produces the sensitive element of its transducers in-house, and is therefore able to guarantee reliability and
precision of measurement.
Gefran displacement transducers are based on two different technologies: potentiometric, which guarantees the flexibility of a wide
range developed over the years, and magnetostrictive, an advanced solution that provides higher performance thanks to its contactless
measurement system.
The following are some of the main features of Gefran displacement transducers:
-
Measurement of absolute position: when the system is switched on, the transducer immediately gives the real position
without having to run mechanical repositioning.
Life: from 100 million strokes of potentiometric transducers to practically unlimited for magnetostrictive transducers,
thanks to the lack of contact between the transducer and the cursor.
High resolution of output signal: from practically infinite for potentiometers to 2 for magnetostrictive transducers.
Easy installation and simple connection to most commercially available instruments and PLCs.
Ability to simultaneously control multiple cursors with the same transducer and provide shift speed (MK4/IK4-C
in CANopen from 1 to 4 cursors).
NEW PRODUCT
The result of constant research and innovation, this new technological solution uses a new sensitive element to read
the magnetic cursors.
Presentation
The structure of the sensitive element has been simplified and optimized thanks to innovative technological solutions
developed and patented by Gefran.
02
In its simple structure, ONDA contains all of the performance features needed to satisfy application requirements:
- a simplified sensitive element makes the transducer even more compact
- a simple, modular structure ensures greater reliability and simpler maintenance
- the uniqueness of the solutions adopted guarantees maximum performance
To launch this new technology, Gefran introduces a magnetostrictive displacement transducer with a completely new
profile: ONP1-A, available with analog output in voltage or in current.
GUIDE TO CHOOSING THE BEST

TRANSDUCER
STROKE LENGTH
GEFRAN potentiometric and magnetostrictive transducers measure linear displacement on strokes from a minimum
of 10 mm to a maximum of 4000 mm. It is important to remember that two strokes are usually specified:
-
Mechanical stroke: the actual shift of the transducer cursor;
Useful electrical stroke: the part of the mechanical stroke on which transducer linearity is guaranteed.
This means that when studying the application, you have to choose a transducer with a useful electrical stroke
greater than or equal to the maximum shift of the moving part.
TYPES OF ACTUATORS
To detect the shift of an object, the transducer has a mobile part that is normally attached to the object itself.
This mobile part is usually one of two types:
-
rod: this is the traditional system used by potentiometers, and consists of a rod inserted in the
transducer body and transmits the shift to the interior of the sensor;
cursor: this system permits more compact solutions thanks to the use of a cursor attached to the
moving part to be measured.
It is available on some potentiometers (series PK, PME and PMI) and on most magnetostrictives.
Note that the cursor can be guided (slide or ring) or completely free from the transducer (floating cursor).
LT
PK
MK
IK
03
INSTALLATION
The transducer can be installed on three types of supports:
brackets: the traditional method; requires a free surface for installation and uses two or more brackets based on
the length of the transducer;
flanges: ideal in applications in which the rod has to pass through a hole and the transducer has to be attached to
the walls of the hole; in this case, you have to pay careful attention to conditions of use, especially in case of long
strokes;
self-aligning joints: these are used to attach the ends of the transducer directly to the moving parts; it eliminates
other attachment points and allows measurement of unaligned movements; this system is unsuitable for very
long strokes.
PZ34-S: bracket
PZ34-F: flange
PZ34-A: joint
PROTECTION LEVEL
Depending on their structure and technology, GEFRAN linear displacement transducers guarantee different levels of
protection against dust and liquids. You can choose within a range of IP40 to IP68, as shown on the following table:
IP40
IP60
IP65
IP67
IP68
PK
LT
LT
RK2 - RK4
IC
PA1
PZ12
PC
MK4
PY1
PZ34
PR65
IK4
ONP1
PME
Pr esentation
PY2
04
PY3
PMA
PS
LT67
PC67
PZ67
PMI / PMISL / PMISLE
COMMUNICATION INTERFACE
Potentiometers supply a ratiometric output in voltage. This means that the output voltage range depends on the voltage
use to feed the transducer.
ATTENTION! The potentiometer must NOT be used as a variable resistance.
If you want a 0..10 VDC or 4..20 mA conditioned signal as a potentiometer output, you can connect a PCIR conditioner
to the device output.
Magnetostrictive transducers let you choose the most appropriate output interface for the application:
-
analog output in voltage:
0..5 VDC/5..0 VDC, 0..10 VDC/10..0 VDC, 5 VDC, 10 VDC
analog output in current:
0..20 mA, 4..20 mA
SSI output:
16, 21, 24, 25 bit in binary or Gray code
CANopen output:
CiA DP 3.01 rel.4.0 and DS406
PLASTIC AND RUBBER

INJECTION PRESSES:
measures displacement
of 4 main movements:
load, injection, die
opening/closing,
extraction.
BLOWING MACHINES:
measures displacement of
die opening/closing, die
translation, Parison check.
MATERIALS WORKING:
measures displacement
of tools such as brushes,
wheels or rolls used in
working metal, wood,
marble, ceramics.
HYDRAULIC AND
PNEUMATIC CYLINDERS:
piston displacement check the transducer is internal
and a magnetic ring cursor
is attached to the piston to
track its movement.
GEOTECHNICS:
use of transducers for
subsidence meters and
strain gauges for
structural monitoring cylindrical models are
preferred.
AUTOMATIVE TEST
MACHINES:
tuning of suspensions on
prototypes and competition
models. Test benches.
Racing cars. Crash tests.
FARM AND EARTH

MOVEMENT MACHINES:
check position of
mechanical arms, bucket
angle, plough height off
ground, crushers, sizing of
asphalting machines.
FOOD INDUSTRY:
check quantity of
substance distributed by
filling syringes or other
injector machines.
RENEWABLE ENERGIES:
check position of solar
trackers, check pitch of
wind generators, check
valves and bulkheads in
hydroelectric plants.
LEVEL CHECKS:
measure level of liquids in
tanks via selection of float.
Applications
APPLICATIONS
05
Potentiometric displacement transducers
SHORT STROKES
06
MODEL
LT
PC
PK
USEFUL ELECTRICAL
STROKE RANGE
50..900 mm
50..750 mm
100..2000 mm
INDEPENDENT
LINEARITY
0,05%
0,05%
0,05%
RESOLUTION
Infinite
Infinite
Infinite
WORK
TEMPERATURE
RANGE
-30..+100C
-30..+100C
-30..+100C
MAXIMUM
DISPLACEMENT SPEED
10 m/sec
5 m/sec
10 m/sec
PROTECTION
LEVEL
IP60 (model -S)

IP65 (model -P)
IP65
IP40
ACTUATOR
Rod
Rod
Sliding cursor
INSTALLATION
Brackets
(variable distances between
centers)
Self-aligning
joints
Brackets
centers)
APPLICATIONS
Reliability in measurement
and control applications,
even under harsh conditions.
Brackets allow installation in
most appropriate position.
The best solution for

mechanical applications and
vehicle development,
automation and robotics,
thanks to its sturdiness and
accuracy.
The absence of a rod lets the

cursor be used along the axis
for longer strokes.
INJECTION PRESSES
HYDRAULIC PRESSES
SANDERS
BENDERS
SANDERS
EARTH MOVING
INJECTION PRESSES
WOODWORKING
PA1
PZ12
PZ34
25..150 mm
25..250 mm
25..300 mm
0,2% on 25
0,1% from 50 to 100
0,05% from 125 to 150
0,2% on 25
0,1% from 50 to 100
0,05% from 125 to 250
0,2% on 25
0,1% from 50 to 100
0,05% from 125 to 300
Infinite
Infinite
Infinite
-30..+100C
-30..+100C
-30..+100C
5 m/sec
10 m/sec
10 m/sec
IP40
IP60
(on request: IP65)
IP60
(on request: IP65)
Rod
Rod
Rod
Brackets
centers)
Brackets (model -S)

Joints (model -A)
Flange (model -F)
Brackets (model -S)

Joints (model -A)
Flange (model -F)
Compact. A joint provides

greater tolerance in
movement.
Reliable even at high
speeds or if subject to
impact and vibration.
Problems traditionally associated with rotative

potentiometers (especially reliability, life, accuracy and
speed) are eliminated.
The ability to attach joints provides error-free operation
even in case of misalignment between transducer axis and
direction of movements.
BENDERS
SANDERS
TRANSFER MACHINES
GLASS WORKING AND CUTTING

GEOTECHNICAL TEST AND INSPECTION MACHINES
SHORT STROKES
07
ALTA IMPERMEABILITA
MODEL
PME12
PMI12
PMISL
USEFUL ELECTRICAL
STROKE RANGE
50..1000 mm
50..1000 mm
50..1000 mm
INDEPENDENT
LINEARITY
0,1% from 50 to 100

0,05% from 150 to 1000
0,1% from 50 to 100

0,05% from 150 to 1000
0,35%
RESOLUTIONE
Infinite
Infinite
Infinite
WORK
TEMPERATURE
RANGE
-30..+100C
-30..+100C
-30..+100C
MAXIMUM
DISPLACEMENT SPEED
5 m/sec
5 m/sec
5 m/sec
PROTECTION
LEVEL
IP67
IP67
IP67
ACTUATOR
Ring cursor
Ring cursor
Ring cursor
INSTALLATION
Brackets
(variable distances
between centers)
Flange
Flange
For pneumatic cylinders.

Pre-wired models or models
with connector.
High protection level and
sturdiness guarantee long life.
For hydraulic cylinders.

Model with threaded flange lets you
install transducer without removing
cylinder.
For hydraulic cylinders, where

smaller rods are necessary
dimensions.
As in the PMI12, the model with
threaded flange lets you install the
transducer without removing
the cylinder.
GEOTECHNICS
UTILITY VEHICLES
HYDRAULIC CYLINDERS
BOTTLING
GEOTECHNICS
UTILITY VEHICLES
HYDRAULIC CYLINDERS
BOTTLING
APPLICATIONS
INJECTION PRESSES
PNEUM. CYLINDERS
GEOTECHNICS
SANDERS
GLASS MACHINES
08
PMISLE
PMA12
IC
50..1000 mm
50..1000 mm
100..550 mm
0,35%
0,1% from 50 to 100

0,05% from 150 to 1000
0,1%
Infinite
Infinite
Infinite
-30..+80C
-30..+100C
-30..+100C
5 m/sec
5 m/sec
1,5 m/sec
IP67
IP67
IP68
Ring cursor
Rod
Ring cursor
Flange
Self-aligning joints
Flange
For in-cylinder applications that

require an economic solution with
integrated analog signal.
Coaxial rod for installation with

self-aligning joints. Low friction,
self-cleaning rod completely in
anodized aluminum.
The best solution for installation in

small spaces.
Used especially inside hydraulic
cylinders.
GEOTECHNICS
UTILITY VEHICLES
HYDRAULIC CYLINDERS
BOTTLING
INJECTION PRESSES
EARTH MOVING
ELEVATORS
SANDERS
LEATHERWORKING
HIGH IMPERMEABILITY
HYDRAULIC CYLINDERS
09
COMPARATORS
MODEL
USEFUL ELECTRICAL
STROKE RANGE
PY1
PY2
PY3
25..150 mm
10..100 mm
10..50 mm
0,2% on 25
0,1% from 50 to 100
0,05% on 150
0,3% on 10
0,2% on 25
0,1% from 50 to 100
0,3% on 10
0,2% on 25
0,1% on 50
Infinite
Infinite
Infinite
-30..+100C
-30..+100C
-30..+100C
MAXIMUM
DISPLACEMENT SPEED
10 m/sec
10 m/sec
10 m/sec
PROTECTION LEVEL
IP40
IP40
IP40
ACTUATOR
Rod
Rod
with return spring
Rod
with return spring
INSTALLATION
Brackets
(variable distances
between centers)
Brackets
(variable distances
between centers)
Brackets
(variable distances
between centers)
INDEPENDENT
LINEARITY
RESOLUTION
WORK TEMPERATURE
RANGE
APPLICATIONS
Compact.
Double support for measurement rod.
Side connection permits through-rod structure, guaranteeing greater overall sturdiness of the sensor.
Model PY1 has a joint for greater tolerance in movement.
PY2 and PY3 automatically position the head thanks to the return spring, making them the best solution for
precise checks on cams or products leaving an automatic production line.
GEOTECHNICS
SANDERS
CERAMIC MACHINES (thickness and planarity check)
WOODWORKING MACHINES (thickness and planarity check)
10
SHORT STROKES
LT 6 7
50..900 mm
0,05%
0,075% x stroke 150mm
PC67
PZ67A
PZ67S
50..750 mm
25..300 mm
25..300 mm
0,05%
0,075% x stroke 150mm
0,2% on 25
0,1% from 50 to 100
0,05% from 125 to 300
0,2% on 25
0,1% from 50 to 100
0,05% from 125 to 300
Infinite
Infinite
Infinite
Infinite
-30..+100C
-30..+100C
-30..+100C
-30..+100C
Standard: 3 msec
(max: 5 msec)
Standard: 3 msec
(max: 5 msec)
Standard: 3 msec
(max: 5 msec)
Standard: 3 msec
(max: 5 msec)
IP67
IP67
IP67
IP67
Rod
Rod
Rod
Rod
Brackets
(variable distances
between centers)
Brackets
(variable distances
between centers)
is designed to guarantee a high protection level (IP67) in applications under harsh

conditions and outdoors, where
it may be necessar y to work in the direct presence of dust, dir t, or liquids (not in prolonged immersion).
INJECTION PRESSES
MOBILE HYDRAULICS
AGRICULTURAL MACHINES
EARTH MOVING
TEST BENCH EQUIPMENT
GLASS WORKS
11
PROFILE
Magnetostrictive displacement transducers
MODEL
MK4-A
USEFUL ELECTRICAL
STROKE RANGE
50..1500 mm
50..4000 mm
INDEP E N DE N T
LINEARI T Y
0,04%
0,02%
RESOLUTION
Infinite
Infinite
WORK TEMPERATURE
RANGE
-20..+75C
-30..+75C
MAXIMUM
DISPLACEMENT SPEED
10 m/sec
10 m/sec
INTERFACE
Analog
Analog
MEASUREMENT
TAKEN
1 cursor
1 cursor (single output)

1 cursor (normal+reverse)
1 cursor (displacement+speed)
2 cursors
PROTECTION LEVEL
IP65
IP67
INSTALLATION
Brackets
(variable distances
between centers)
Brackets
(variable distances
between centers)
APPLICATIONS
12
ONP1-A
Optimized model: works with a wide

range of accessories, guarantees
maximum simplicity and economy
of installation, with one of the
highest performance levels in its
class.
High precision guaranteed by better linearity than with

potentiometers.
Ideal for harsh environments thanks to high protection level.
Analog or digital interface for direct link to PLC. Brackets
allow installation in most appropriate position.
INJECTION PRESSES
MARBLE AND CERAMIC WORKING
METALWORKING
INJECTION PRESSES
PLASTIC AND GLASS BLOWING
MARBLE AND CERAMIC WORKING
METALWORKING
PROFILE
MK4-C
50..4000 mm
50..4000 mm
0,02%
0,02%
max 2 m
max 2 m
-30..+75C
-30..+75C
10 m/sec
10 m/sec
SSI
CANopen
1 cursor
from 1 to 4 cursors
IP67
IP67
Brackets
centers)
Brackets
centers)
SSI digital interface allows

high-precision absolute
displacements.
CANopen inter face

allows connection via
fieldbus.
SERVO-DRIVES
ROBOTICS
PRESSES
ROBOTICS
MACHINE TOOLS
MK4-S
13
ROD
IK4-A
USEFUL ELECTRICAL
STROKE RANGE
50..4000 mm
50..4000 mm
50..4000 mm
INDE P E N DE N T
LINE ARI T Y
0,02%
0,02%
0,02%
RESOLUTION
infinite
max 2 m
max 2 m
WORK TEMPERATURE
RANGE
-30..+75C
-30..+75C
-30..+75C
MAXIMUM
DISPLACEMENT SPEED
10 m/sec
10 m/sec
10 m/sec
INTERFACE
Analog
SSI
CANopen
MEASUREMENT
TAKEN
1 cursor
(normal+reverse)
1 cursor
From 1 to 4 cursors
(displacement+speed)
PROTECTION LEVEL
IP67
IP67
IP67
Flange
Flange
Flange
INSTALLATION
APPLICATIONS
14
IK4-C
MODEL
IK4-S
The IK4 lines new mechanical

structure offers improved
features for in-cylinder use,
including a series of newmodels,
free rotation of the connector
head, and replacement of internal
electronics without removal of the
transducer.
The digital SSI interface

ensures high-precision
absolute displacements.
HYDRAULIC SYSTEMS FOR

PLANT AUTOMATION
INDUSTRIAL HYDRAULICS
LEVEL CHECKS

METALWORKING
Precision of digital signal plus

practical CANopen interface allows
adaptation in existing plants using
standard communication systems..

METALWORKING
ROD
RK-2
RK-4
50..4000 mm
50..4000 mm
0,02%
0,02%
infinite
infinite
-30..+90C
-30..+90C
10 m/sec
10 m/sec
Analog
Digital
CANopen (option
remote electronic)
Analog
1 cursor
1 cursor
IP67
IP67
Internal flange
Threaded external flange
The overall dimensions of the sensor are among the smallest on the market.
The optional and remotable (maximum of 50 meters) electronics allows the use of advanced interfaces
without affecting sensor size, for in-cylinder installation.
EARTH MOVING
AGRICULTURAL MACHINES
UTILITY VEHICLES
INDUSTRIAL HYDRAULICS
15
Rotative displacement transducers
MODEL
16
PS09
PS11
PS20
PR65
USEFUL ELECTRICAL
STROKE RANGE
340 4
345 4
350 4
345 4
IND E P E N D E N T
LINE ARI T Y
1 .. 0,05%
(on request)
1 .. 0,05%
(on request)
1 .. 0,05%
(on request)
1 .. 0,05%
(on request)
RESOLUTION
Infinite
Infinite
Infinite
Infinite
-55..+100C
-55..+100C
-55..+100C
-55..+100C
MAXIMUM ROTATION
SPEED
600 U/min
600 U/min
600 U/min
600 U/min
MAXIMUM TORQUE
0,20 Ncm
0,20 Ncm
0,20 Ncm
1,8 Ncm
PROTECTION LEVEL
IP40
IP40
IP40
IP65
INSTALLATION
Ser vo
(flange)
Ser vo
(flange)
Ser vo
(flange)
Ser vo
(flange)
OUTSIDE DIAMETER
22,25 mm
27,05 mm
50,80 mm
55 mm
SHAFT DIAMETER
3,175 mm
3,175 mm
6,35 mm
6 mm
APPLICATIONS
For measurement, control, and instrumentation applications.

A high-precision angular displacement transducer that satisfies the requirements
of most analog applications.
Stainless steel shaft, gold-welded terminals; all metal parts protected against
corrosion.
WORK TEMPERATURE
RANGE
High protection
level, all-metal
housing .
ACCESSORIES
SIGNAL CONDITIONERS FOR POTENTIOMETRIC TRANSDUCERS
PCIR-101: Output 0...10Vdc

PCIR-102: Output 4...20mA
PCIR-A: Output 0...10Vdc
Interface module integrated in female connector

(directly connectable to series LT and PK)
Standard output 0..10Vcc (PCIR 101)
Standard output 4..20mA (PCIR 102)
High linearity (0.01% FSO)
Lower Zero and Span thermal drift
Settable Zero and Span
High input impedance (>100 MOhm)

Standard output 0..10Vcc
Linearity error: 0.02% FSO
Thermal drift: 0.01% FSO/C
Simultaneous control of two transducers
Preset for DIN EN50035 and EN50022 mounting
MOR031 female connector
JOINTS FOR POTENTIOMETRIC TRANSDUCERS PKIT015: for pot. series LT
CURSORS FOR MAGNETOSTRICTIVE TRANSDUCERS
SERIES MK4 / ONP1

PCUR034
PCUR035
PCUR036
PCUR037
PCUR135
PCUR136
PCUR137
PCUR027
PCUR022
PCUR023
SERIES IK
PCUR026
int. 12,5 mm
ext. 54 mm
length 70 mm
int. 15 mm
ext. 54 mm
length 70 mm
int. 13,5 mm
ext. 32,8 mm
length 7,9 mm
int. 13,5 mm
ext. 32,8 mm
length 7,9 mm
PCUR024
int. 13,5 mm
ext. 32,8 mm
length 7,9 mm
17
ACCESSORIES
PY1
PY2
PY3
PME12
3-pin female mating connector; IP40 protection
LT-H
PC-H
CON006
4-pin female mating connector (DIN43650A)
LT-M
CON008
4-pin female mating connector (DIN43650C)
CON011
LT-B
PC-B
PK-B
PA1-C
PY-C
CON012
LT-B
PC-B
PK-B
PA1-C
PY-C
CON013
Angled 5-pin female mating connector IP40 protection
LT-B
PC-B
PK-B
PA1-C
PY-C
CON050
Angled 4-pin M12 female mating connector; IP67 protection
CON293
4-pin M12 female mating connector; IP67 protection
CON300
6-pin female mating connector
CAV010
Female connector + 2mt of wired cable PVC (for PME model)
CON021
6-pin female mating connector; IP40; DIN45322
CON022
CON023
Angled 6-pin female mating connector; IP67; DIN45322
CON026
CON027
CON028
Angled 8-pin female mating connector; IP67; DIN45326
CON031
5-pin M12 female mating connector; IP67
CON035
8-pin M12 female mating connector; IP67
CON041
Angled 5-pin M12 female mating connector; IP67
CON042
Angled 8-pin M12 female mating connector; IP67
CON460
8-pin M12 male mating connector; IP67 (for RK-EK connection)
CAV002
Female connector with 2 meter cable lenght; IP67 protection
CAV003
CAV004
CAV009
CAV005
90 angled female connector with 2 meter cable lenght; IP67 protection
CAV006
CAV007
CAV008
CAV011
Female connector with 2 meter cable lenght IP67 protection
CAV012
CAV013
CAV015
CAV021
90 angled female connector with 2 meter cable lenght IP67 protection
CAV022
CAV023
CAV024
DESCRIPTION
IC
PC
Accessories
PA1
LT
CON002
CODE
18
PK
FEMALE CONNECTOR FOR POTENTIOMETRIC TRANSDUCERS

Models:
PK-M
PC-M
IC-C
PME12-C
IK4-C-B/C-X
RK2+EK_-_-B
MK4-A-B
MK4-S-B
MK4-C-B
IK4-A-B
IK4-S-B
IK4-C-B/C-X
RK2+EK_-_-B
MK4-A-B
MK4-S-B
MK4-C-B
IK4-A-B
IK4-S-B
IK4-C-B/C-X
RK2+EK_-_-B
MK4-A-C
MK4-S-C
MK4-A-C
MK4-S-C
MK4-A-C
MK4-S-C
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
IK4-S-B
RK2
IK4-A-B
IK4-C
MK4-C-B
IK4-S
MK4-S-B
IK4-A
MK4-S
MK4-A-B
MK4-C
MK4-A
ONP1-A
LT67
PC67
PZ67
ACCESSORIES
ONP1-A-M
LT67/PC67/PZ67-S
LT67/PC67/PZ67-S
PZ67-A
MK4-A-A
MK4-A-H
MK4-S-H
MK4-A-A
MK4-A-H
MK4-S-H
RK2+EK_
MK4-A-H
MK4-A-H
MK4-A-H
MK4-A-H
MK4-S-H
MK4-A-H
MK4-S-H
MK4-A-H
MK4-S-H
MK4-A-H
MK4-S-H
MK4-A-H
MK4-S-H
MK4-A-A
MK4-S-H
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-S-H
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-S-H
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
MK4-A-A
MK4-C-A
IK4-A-A
IK4-C-A/C-Y
RK2+EK_-_-M
RK4
19
Headquarter
GEFRAN Spa
Via Sebina, 74
25050 PROVAGLIO DISEO (BS) ITALY
Ph. +39 03098881
Fax +39 0309839063
info@gefran.com
Drive & Motion Control Unit

Via Carducci, 24
21040 GERENZANO (VA) ITALY
Ph. +39 02967601
Fax +39 029682653
info.motion@gefran.com
G E F R A N
CERTIFICAZIONE DEI SISTEMI

QUALIT DELLE AZIENDE
UNI EN ISO 9001
CERTIFICATO nr. 9115 GEF1
GEFRAN BENELUX
Lammerdries-Zuid 14A
B-2250 OLEN
Ph. +32 (0) 14248181
Fax. +32 (0) 14248180
info@gefran.be
SIEI AREG - GmbH

Gottlieb-Daimler Strasse 17/3
D-74385 - Pleidelsheim
Ph. +49 (0) 7144 897360
Fax +49 (0) 7144 8973697
info@sieiareg.de
GEFRAN BRASIL
ELETROELETRNICA
Avenida Dr. Altino Arantes,
377/379 Vila Clementino
04042-032 SO PAULO - SP
Ph. +55 (0) 1155851133
Fax +55 (0) 1132974012
gefran@gefran.com.br
GEFRAN SIEI - ASIA

Blk.30 Loyang Way
03-19 Loyang Industrial Estate
508769 Singapore
Ph. +65 6 8418300
Fax +65 6 7428300
info@gefransiei.com.sg
GEFRAN DEUTSCHLAND
Philipp-Reis-Strae 9a
63500 SELIGENSTADT
Ph. +49 (0) 61828090
Fax +49 (0) 6182809222
vertrieb@gefran.de
GEFRAN SIEI Electric Pte Ltd

Block B, Gr.Flr, No.155, Fu Te Xi Yi
Road,
Wai Gao Qiao Trade Zone Shanghai,
200131
Ph. +86 21 5866 7816
Ph. +86 21 5866 1555
gefransh@online.sh.cn
GEFRAN SUISSE
Rue Fritz Courvoisier, 40
2302 LA CHAUX-DE-FONDS
Ph. +41 (0) 329684955
Fax +41 (0) 329683574
office@gefran.ch
GEFRAN SIEI Drives Technology (Shanghai) Co., Ltd

No.1265, Bei He Road, Jiading
District, 201821 Shanghai, China
Ph. +86 21 69169898
Fax +86 21 69169333
info@gefransiei.com.cn
GEFRAN FRANCE
4, rue Jean Desparmet - BP 8237
69355 LYON Cedex 08
Ph. +33 (0) 478770300
Fax +33 (0) 478770320
commercial@gefran.fr
GEFRAN INDIA Pvt. Ltd.

Survey No.: 182/1 KH, Bhukum
Paud Road, Taluka, Mulshi
Dist.Pune-411042, MH, INDIA
Ph. +91 20 3939 4400
Fax +91 20 3939 4401
GEFRAN UK Ltd
7 Pearson Road - Central Park
Telford - TF2 9TX
Ph. +44 (0) 8452 604555
Fax +44 (0) 8452 604556
sales@gefran.co.uk
GEFRAN Inc.
8 Lowell Avenue
WINCHESTER - MA 01890
Toll Free 1-888-888-4474
Fax +1 (781) 7291468
info@gefraninc.com
GEFRAN S.p.A.
Sucursal en Espaa
Calle Vic, nmeros 109-111
08160 - MONTMEL - (BARCELONA)
Ph. +34 934982643
Fax +34 935721571
comercial.espana@gefran.es
w w w. g e f r a n . c o m
Argentina
Austria
Australia
Bosnia/Herzegovina
Bulgaria
Canada
Chile
Cyprus
Colombia
Croatia
Czech Republic
Denmark
Egypt
Finland
Greece
Hong Kong
Hungary
Iran
Israel
Japan
Jordan
Korea
Kosovo
Lebanon
Macedonia
Malaysia
Maroc
Mexico
Montenegro
New Zealand
Norway
Peru
Poland
Portugal
Rumania
Russia
Saudi Arabia
Serbia
Singapore
Slovakia Republic
Slovenia
South Africa
Sweden
Sri Lanka
Taiwan
Thailland
Tunisia
Turkey
Ukraine
United Arab Emirates
Venezuela
COD. 80411H - 01/2011
AUTHORIZED DISTRIBUTORS

Displacement Transducers

Uploaded by

Copyright:

Available Formats

Displacement Transducers

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Displacement Transducers

Uploaded by

Copyright:

Available Formats

Displacement Transducers

Gefran displacement transducers:

GUIDE TO CHOOSING THE BEST

Mechanical stroke: the actual shift of the transducer cursor;

analog output in voltage:

0..5 VDC/5..0 VDC, 0..10 VDC/10..0 VDC, 5 VDC, 10 VDC

analog output in current:

0..20 mA, 4..20 mA

16, 21, 24, 25 bit in binary or Gray code

CiA DP 3.01 rel.4.0 and DS406

PLASTIC AND RUBBER

FARM AND EARTH

Potentiometric displacement transducers

IP60 (model -S)

The best solution for

The absence of a rod lets the

Brackets (model -S)

Brackets (model -S)

Compact. A joint provides

Problems traditionally associated with rotative

GLASS WORKING AND CUTTING

Potentiometric displacement transducers

Potentiometric displacement transducers

0,1% from 50 to 100

0,1% from 50 to 100

For pneumatic cylinders.

For hydraulic cylinders.

For hydraulic cylinders, where

0,1% from 50 to 100

For in-cylinder applications that

Coaxial rod for installation with

The best solution for installation in

Potentiometric displacement transducers

Potentiometric displacement transducers

is designed to guarantee a high protection level (IP67) in applications under harsh

TEST BENCH EQUIPMENT

Magnetostrictive displacement transducers

1 cursor (single output)

Optimized model: works with a wide

High precision guaranteed by better linearity than with

SSI digital interface allows

CANopen inter face

Magnetostrictive displacement transducers

Magnetostrictive displacement transducers

The IK4 lines new mechanical

The digital SSI interface

HYDRAULIC SYSTEMS FOR

HYDRAULIC SYSTEMS FOR

Precision of digital signal plus

HYDRAULIC SYSTEMS FOR

Threaded external flange

Rotative displacement transducers

For measurement, control, and instrumentation applications.

PCIR-101: Output 0...10Vdc

PCIR-A: Output 0...10Vdc

Interface module integrated in female connector

High input impedance (>100 MOhm)

JOINTS FOR POTENTIOMETRIC TRANSDUCERS PKIT015: for pot. series LT