Introduction To BSS Alarm Reference
Introduction To BSS Alarm Reference
Click the Index tab to list the alarms in alphabetical order, where you
can find an alarm either by entering name of the desired alarm or
scrolling down the alarm list.
Click the Search tab and enter the keyword for the search to display
related alarms.
In the left pane on the Help window, click an alarm list item, and the detailed
help information about this alarm will appear in the right pane.
Alarm List
101 MSC Overload
102 Disrupted Connection with the CBC
103 All SS7 Links Faulty
104 All PBSLs in the PCU Are Faulty
105 ONE PBSL Link SINGLE PASS
106 PCIC CHECK IS INCONSISTENT
124 No A Interface Circuit Configured in the BSC
126 No Circuit Configured in the MSC
127 No Pb Interface Circuit Configured on the BSC side
128 No Circuit Configured in the PCU
129 MSC Resetting
20007 Faulty Clock Source 0 from the Rear Interface Board to the Backplane
of the GSCU
20008 Faulty Clock Source 1 from the Rear Interface Board to the Backplane
of the GSCU
20009 Faulty 8 kHz Clock Source from the Active GGCU to the Backplane of
the GSCU
20010 Faulty 8 kHz Clock Source from the Standby GGCU to the Backplane
of the GSCU
20013 Faulty GGCU 8 kHz Clock Source for the Front Panel of the GSCU
20016 Faulty 32 MHz Clock from the Backplane
20025 BIOS Check Failure
20026 Faulty Phase-Locked Loop of the Board Clock
20027 Abnormal Subrack Information
20028 Faulty Packet Switching Unit
20029 Board Fault - Faulty Logical Unit
20030 Faulty Sub-Board
20038 Faulty Board Chip
20039 Faulty Output Clock Signals
20040 High Board Temperature - Minor Alarm
20041 High Board Temperature - Major Alarm
20042 High Board Temperature - Critical Alarm
20044 Unavailable Clock Source
20052 Flash erase/write fail alarm
20081 Loss of E1/T1 Signals (LOS)
20082 Loss of E1/T1 Frames (LOF)
20083 Remote E1/T1 Alarm (RAI)
20084 E1/T1 Alarm Indication Signal (AIS)
20085 Loss of E1/T1 Multiframes (LOM)
20086 E1/T1 Link Loopback
20087 High BER over the E1/T1 Link