Broder Son

Tech Spec
IC-80-J
Industrial Crane
18,000 lb Max. Capacity

Available in 3 Boom
Lengths
Rated Capacity Limiter ... Standard

Capacity on Outriggers ... 18,000 lb
Pick and Carry Capacity ... up to 11,700 lbs
Height ... 7 3
Width ... 6 6
Boom Rotation ... 360 Degree Continuous
Sheave Height ... up to 46
Horizontal Reach ... up to 40
4-Wheel Steer ... Standard
Powershift Transmission ... Standard
Fully Hydraulic Controls for Smooth
Precise Operations
Independent Outrigger Controls
Dual Fuel or Diesel Engine Available
Manufacturing Corp.
IC-80-J
Specifications
GENERAL:
Weight:
2-Wheel Drive
IC-80-1J
16,200 lb
(7,350 kg)
IC-80-2J
16,400 lb
(7,440 kg)
IC-80-3J
16,750 lb
(7,600 kg)
Boom Movement:
Continuous
Continuous
Continuous
Rotation
0 to 70
0 to 70
0 to 70
Elevation
12 ft.
14 ft. 6 in.
18 ft. 6 in.
Extension
(442 cm)
(564 cm)
(366 cm)
Boom Speeds:
2.0 RPM
2.0 RPM
2.0 RPM
Rotation
10.0 sec.
10.0 sec.
10.0 sec.
Elevation
17.0 sec.
21.0 sec.
27.0 sec.
Extension
Turning Radius:
11 ft. 2 in. (3.40 m)
(C/L of Outside Steering Wheel)
9 ft. 7 in. (2.92 m)
Aisle Width for 90 Turn:
Gradeability:
63 percent (32 degrees)
ENGINE:
Dual Fuel
Diesel
Make
GM
Cummins
3.0 EFI* EPA Tier II B 3.3L EPA Tier IVi
Model
Type
Gas
Diesel
4
4
No. Cyl.
181 CID (3.0 L)
199 CID (3.3 L)
Displacement
74 (55kW)
HP @ Gov. Speed 59 (44kW)
Electronic Fuel Injection with Dual Fuel, US EPA & CARB.
Certified for 2012 emissions standards
Fuel Tank Capacity: 17.6 Gallons (66.6 L)

TRANSMISSION:
Powershift transmission with 4-speeds in forward & reverse. Provides powershifts at any engine speed in any gear. All shifting is
done with a single lever electrical control mounted on the steering
column. Multiple-disc clutch packs operated by solenoid valve
provide forward, neutral, reverse and speed selection. Equipped
with oil cooler and filter. Torque converter has stall ratio of 2.2:1.
Transmission Forward
Travel Speed Drawbar Pull1
Gear
or Reverse MPH (km/h)
Pounds (kg)
First
5.72:1
4 (6)
15,500 (7,031)
Second
3.23:1
7 (11)
8,700 (3,946)
Third
1.77:1
13 (21)
4,600 (2,087)
Fourth
1.00:1
22 (35)
2,500 (1,134)
1) Drawbar pull is calculated based on GM 3.0L gasoline engine.
AXLES:
Front:
Planetary drive/steer axle with 11.625:1 axle ratio. Differential is
No-Spin. Axle mounted rigidly to frame.
Rear:
2-Wheel Drive:
Axle with 1-1/2 oscillation in either direction.
STEERING:
Hydraulic steering unit with cylinders attached to each axle. Rear
axle is the primary steer. An electric switch in the operators commartment is used to select rear-wheel steering, four-wheel round
steering or crab steering. Electronic sensors and control box automatically align the steering when a new mode is selected.
BRAKES:
Four-wheel hydraulic. Wet disc brakes are on the front and rear
axles. Parking brake is disc type.
TIRES:
2-Wheel Drive 10.00 x 15, load range H bias, 16-ply rating.
CHASSIS:
Cargo Deck:
53 square feet (5 m2) of deck area. A maximum of 14,000 lb
(6,350 kg) capacity on deck when load is centered over or between axles.1 A storage box is located in front cargo deck. Steps
located on front corners. Heavy deck loads allowed at creep
speed below 2 MPH (3.2 km/h) and less than 200 feet
(61 m) in 30 minutes.
Headlight and Taillight Grilles:

Welded steel protective grilles for headlights and taillights.
Outriggers:
Four hydraulic outriggers of box beam construction. Independent controls for each outrigger. Each cylinder equipped with
direct-connected holding valves. Outrigger pad dimension 9
inches (23 cm) x12 inches (30 cm).
Lifting Rings:
Lifting rings at each corner of cargo deck so sling can be
attached for lifting crane.
OPERATOR COMPARTMENT:
Operators control station provides one-position access to all
operating functions. Includes adjustable operators seat,
retracting seat belt, fire extinguisher and bubble level.
ELECTRICAL (12 Volt System):
Instrument Package:
Includes fuel gauge and hourmeter. Also included are warning
lights for low oil and transmission pressure, turn signal, high
beams, hazard lights, parking brake, hydraulic oil temperature,
battery, check engine, stop engine, coolant temperature, outriggers.
Lighting Package:
One pair headlights with Hi and Low beams, back-up lights,
integral tail, brake, front and rear turn signals and emergency
flasher switch at operators station. 12V horn actuated by button
on shifting control.
Back-Up Alarm:
Provides pulsating sound from 97 dB alarm when transmission is
in reverse. Conforms to SAE J994b.
Outrigger Alarm System:
Two-tone alarm is activated when outrigger down controls
are operated.
HYDRAULIC SYSTEM:
Tandem pump, direct-driven by engine crankshaft, rated at
16 & 32 GPM at rated RPM (61 L/min & 121 L/min). Hydraulic oil
tank capacity of 25 gallons (95 L).
BOOM ASSEMBLY:
Three-section boom assembly equipped with bearing pads,
double-acting hydraulic cylinders with direct-connected holding
valves & boom angle indicator on each side of boom.
Boom Rotation:
Heavy-duty ball bearing rotation gear with external teeth. Rotation is powered by hydraulic motor and worm gear drive.
Boom Hoist:
Turret mounted planetary gear hoist hydraulically powered with
a bare-drum line pull of 10,000 lbs (4,536 kg) at a speed of 110
FPM (34 m/min). Includes downhaul weight, swivel hook &
sheave block for 2-part line and 125 ft (38 m) of 9/16 (14 mm)
hoist rope.
Anti-Two-Block Device:
Prevents damage to hoist rope and/or crane components from
pulling load hook against tip.
Sheave Block, Two-Part:
Single sheave block for 2-part line requirements.
Rated Capacity Limiter:
Warns operator of impending overload with audible and visual
signals. Prevents overload by stopping boom functions
that cause overloads.
Drum Rotation Indicator:
Provides tactile feedback to operator when hoist drum is rotating.
IC-80-1J
IC-80-2J
IC-80-3J
IC-80-J
Options
Listed below are brief descriptions of options available for this product.
Consult the IC-80-J Engineering Spec for additional information.
MODELS:
IC-80-1J Industrial Crane with
82 (2.5 m) - 202 (6.1 m) Boom Reach
96 (2.9 m) - 24 (7.3 m) Boom Reach
116 (3.5 m) - 30 (9.1 m) Boom Reach
CHASSIS OPTIONS:
Auxiliary Winch:
Mounted behind front bumper, hydraulically
driven with control in operators console.
Pintle Hook:
Pintle Hook, Rear
Pintle Hook, Front
Rearview Mirrors:
One mounted on right-hand deck stake and
one mounted on left-hand deck stake.
ENGINE:
Spark Arrester Muffler:
Installed in addition to std. muffler.
OPERATOR COMPARTMENT OPTIONS:
Catalytic Converter:
Operator Guard:
Reduces engine emissions.
Tubular steel weldment with heavy
Engine Heater:
expanded steel mesh top section.
Engine coolant heater installed to circulate
Operator Guard Cover:
warm water through engine. Plugs into120
Clear vinyl cover which goes over Operator
volt AC. 1,500 watts.
Guard, for inclement weather operations.
TIRE OPTIONS:
All-Weather Cab:
Mining & Industrial Tires:
Rigid-mounted canopy section & removable
36 x 11-15, 16-Ply Rating
hinged door.
Includes heater, electric
36 x 11-15, Non Marking
windshield wiper, one sliding glass window
Solid Rubber Tires, 8.25 x 15
in the door & one in the right side of canopy.
Foam Filling of Tires
Defroster fan & dome light included.
Spare Tire & Wheel:
Cab Heater:
Bias 10.0 x 15
Heater with two-speed fan for units without
Mining & Industrial, 36 x 11-15
All-Weather Cab.
Mining & Industrial, Non Marking
Windshield Washer:
Includes reservoir pump and nozzle.
Floor Mat:
Vinyl mat with foam backing.
Deluxe Seat:
Deluxe Seat with upholstery springs
provides additional operator comfort.
Noise Reduction Kit:
Includes floor mat, control valve and side
panels of foam backed vinyl for noise
reduction.
Air Conditioning:
Air Conditioner with R134 coolant.
ELECTRICAL OPTIONS:
Strobe Lights:
Yellow strobe light mounted on each side of
turret weight box.
Boom Work Lights:
One work light mounted to boom to light
boom tip and one work light mounted to
turret to light ground under boom tip.
Work Lights-Rear:
Two work lights recessed in rear bumper.
BOOM ATTACHMENTS:
Boom Extension, 10 Foot (3 m):
Boom stowable.
Boom Extension, 10 Foot (3 m)
Offsettable:
Same as above item, except the boom
extension is offsettable to 3 different
positions; 0 degrees (inline), 15 degrees
and 30 degrees offset.
Searcher Hook:
Nose Mount
Should you require an option or special equipment not listed please consult your dealer salesperson or BMC.
Manufacturing Corp.
PO Box 14770 Lenexa Kansas 66285
Tel (913) 888-0606

Fax (913) 888-8431
www.broderson.net
2011, Broderson Manufacturing Corp.
Dimensions and values shown are

for reference purposes only.
Specifications subject to change.
Form #CC111J (11/11)

Broder Son

Uploaded by

Copyright:

Available Formats

Broder Son

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Broder Son

Uploaded by

Copyright:

Available Formats

Tech Spec

18,000 lb Max. Capacity

Rated Capacity Limiter ... Standard

Fuel Tank Capacity: 17.6 Gallons (66.6 L)

Headlight and Taillight Grilles:

Tel (913) 888-0606

2011, Broderson Manufacturing Corp.

Dimensions and values shown are

You might also like