Welding Wires & Rods: MIG/MAG - Low Alloyed Steels: Classification

VAC 60
Welding wires & rods: MIG/MAG - low alloyed steels

Classification:
EN 440
EN 1668
DIN 8559
W.Nr
ASME/AWS SFA A5.18
ISO
G3Si1
WSG2
SG - 2
1.5125
ER 70 S-6
-
Description and application:

Solid copper coated welding wire for welding in gas shielding atmospheres. Suitable for
welding unalloyed steels with tensile straight below 530 N/mm2 like boiler plate, finegrained steels, pipe steels, shipbuilding steels and cast steels.
Base materials:
Description:
DIN, AISI:
EN:
Unalloyed steels
St 33 to St 60.2
10025
Fine-grained steels
St E 255 to St E 355
W St E 255 to W St E 355
Boiler and vessel plate
H I, H II, 17Mn4, 19Mn5
10028-2
Pipe steels
St 35 to St 52.4
E St E 210.7 to St E 360.7
Shipbuildibg steels
A, B, D, E
10025
Odlewy stalowe Cast steel
GS 38 to GS 52
Chemical composition of welding wire and all-weld metal analysis (wt.

%):
C
Si
Mn
0,08
0,90
1,50
<0,025
<0,025
Mechanical properties of all weld metal (wt. %):

Yield strength
Rp 0.2 %:
410 - 490
N/mm2
Tensile strength
Rm:
510 - 590
N/mm2
Elongation
A5 :
22 - 30
Impact energy
Av :
>47
J (-40 C)
Suitable shielding gases:
MAG- 100% CO2, Ar + 18% CO2, CO2 + Ar + O2

(C1, M21, M22 - M33 according to EN 439)
Wire sizes available:
0,6 ; 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and DIN 8559. Iron or
plastic spools, normal or precision layer wound.
Approvals:
TV, DB, CR, ABS, BV, GL, LR, DNV, S, CWB, UDT
Print version
Up
VAC 65
Classification:
EN 440
PrEN1668
DIN 8559
G4Si1
W4Si1
SG 3
W SG 3
1.1.5130
ER 70 S-6
-
W.Nr
ASME/AWS A - 5.18
ISO

Solid copper coated welding wire for welding in gas shielding atmospheres. Slightly
higher silicon and manganese alloyed than VAC 60. The higher contains of silicon and
manganese increase the yield stress and tensile strength of weld metal (compared
with VAC 60). The high silicon content promotes a low sensitivity to surface impurities
and contributes to smooth weld. Suitable for welding unalloyed and low alloyed
construction steels with tensile straight below 640 N/mm2 like boiler plate, finegrained steels, pipe steels, shipbuilding steels and cast steels.
Base materials:
Description:
DIN, AISI:
EN:
Unalloyed steels
St 33 to St 60.2
10025
Fine-grained steels
Boiler and vessel plate
H I, H II, 17Mn4, 19Mn5
10028-2
Pipe steels
St 35 to St 52.4
E St E 210.7 to St E 360.7
A, B, D, E
10025
Shipbuilding steels

%):
C
Si
Mn
0,08
1,00
1,70
<0,025
<0,025

Yield strength
Rp 0.2 %:
> 460
N/mm2
Tensile strength
Rm:
560 - 680
N/mm2
Elongation
A5 :
>22
Impact energy
Av :
>47
J (-40 C)
MAG- 100% CO2, Ar + 18% CO2, CO2 + Ar + O2

0,6 ; 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)
Form of delivery:
Approvals:
UDT, TV, DB
Print version
Up
VAC CuNi
Classification:
EN
DIN
ASME/AWS A5.18
ISO
ER 70 S-6
-
Solid nickel and copper alloyed copper coated welding wire for welding in gas shielding
atmospheres. Suitable for welding atmosphere resistance steels, fine-grained steels
with yield strength up to 460 N/mm2 and unalloyed and low alloyed steels with tensile
straight up to 685 N/mm2.
Base materials:
Description:
DIN, AISI:
EN:
Special alloyed, for constructions
WT St 37, WT St 52
10025
(CORTEN A B C)
(Patinox 37)
(RBH 35)
(HSB 37, HSB 55C)
(A cor 37, A cor50)

%):
C
Si
Mn
Ni
Cu
0,1
0,90
1,50
0,5
0,5
<0,025
<0,025

Yield strength
Rp 0.2 %:
430 - 530
N/mm2
Tensile strength
Rm:
540 - 640
N/mm2
Elongation
A5 :
22 - 30
Impact energy
Av :
>47
J (-40 C)

100% CO2, Ar + 18% CO2, CO2 + Ar + O2
0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)
Form of delivery:
Print version
Up
VAC Ni
Classification:
EN
DIN
ASME/WS A5.18
ISO
ER 70 S-6
-

Solid nickel alloyed copper coated welding wire for welding in gas shielding
atmospheres. Suitable for welding high grade structural steels with tensile straight up
to 685 N/mm2 and for low temperature application.
Base materials:
Description:
DIN, AISI:
EN:
Alloyed, for construction
Special alloyed, for constructions
T St E 380 to T St E 500
Unalloyed
17Mn4, 19Mn5
Weatherproof steels
(CORTEN, Patinax)

%):
C
Si
Mn
Ni
0,08
0,80
1,50
1,10
<0,025
<0,025

Yield strength
Rp 0.2 %:
440 - 510
N/mm2
Tensile strength
Rm:
560 - 630
N/mm2
Elongation
A5 :
22 - 30
Impact energy
Av :
>47
J (-40 C)
100% CO2, Ar + 18% CO2, CO2 + Ar + O2

0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)
Form of delivery:

Welding Wires & Rods: MIG/MAG - Low Alloyed Steels: Classification

Uploaded by

Copyright:

Available Formats

Welding Wires & Rods: MIG/MAG - Low Alloyed Steels: Classification

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Welding Wires & Rods: MIG/MAG - Low Alloyed Steels: Classification

Uploaded by

Copyright:

Available Formats

VAC 60

Welding wires & rods: MIG/MAG - low alloyed steels

Description and application:

Boiler and vessel plate

H I, H II, 17Mn4, 19Mn5

Odlewy stalowe Cast steel

Chemical composition of welding wire and all-weld metal analysis (wt.

Mechanical properties of all weld metal (wt. %):

Suitable shielding gases:

MAG- 100% CO2, Ar + 18% CO2, CO2 + Ar + O2

Wire sizes available:

0,6 ; 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)

Description and application:

Boiler and vessel plate

H I, H II, 17Mn4, 19Mn5

Chemical composition of welding wire and all-weld metal analysis (wt.

Mechanical properties of all weld metal (wt. %):

Suitable shielding gases:

MAG- 100% CO2, Ar + 18% CO2, CO2 + Ar + O2

Wire sizes available:

0,6 ; 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)

Description and application:

Special alloyed, for constructions

(HSB 37, HSB 55C)

(A cor 37, A cor50)

Chemical composition of welding wire and all-weld metal analysis (wt.

Mechanical properties of all weld metal (wt. %):

Suitable shielding gases:

Wire sizes available:

0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)

Description and application:

Alloyed, for construction

Special alloyed, for constructions

Chemical composition of welding wire and all-weld metal analysis (wt.

Mechanical properties of all weld metal (wt. %):

Suitable shielding gases:

100% CO2, Ar + 18% CO2, CO2 + Ar + O2

Wire sizes available:

0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 (f mm)

You might also like