Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Abb Wiring Diagrams

    Uploaded by

    boltgingerkoppy
    This document contains wiring diagrams and information for circuit breakers. It includes: 1. Graphic symbols used in wiring diagrams and their meanings. 2. Diagrams of single-pole, two-pole, three-pole, and four-pole circuit breakers with thermomagnetic or electronic trip units. 3. Diagrams and explanations of shunt opening and undervoltage releases, and auxiliary contacts for circuit breakers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Abb Wiring Diagrams

    Uploaded by

    boltgingerkoppy
    4K views7 pages
    This document contains wiring diagrams and information for circuit breakers. It includes: 1. Graphic symbols used in wiring diagrams and their meanings. 2. Diagrams of single-pole, two-pole, three-pole, and four-pole circuit breakers with thermomagnetic or electronic trip units. 3. Diagrams and explanations of shunt opening and undervoltage releases, and auxiliary contacts for circuit breakers.

    Original Description:

    WIRING Diagrams

    Original Title

    ABB WIRING DIAGRAMS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains wiring diagrams and information for circuit breakers. It includes: 1. Graphic symbols used in wiring diagrams and their meanings. 2. Diagrams of single-pole, two-pole, three-pole, and four-pole circuit breakers with thermomagnetic or electronic trip units. 3. Diagrams and explanations of shunt opening and undervoltage releases, and auxiliary contacts for circuit breakers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4K views7 pages

    Abb Wiring Diagrams

    Uploaded by

    boltgingerkoppy
    This document contains wiring diagrams and information for circuit breakers. It includes: 1. Graphic symbols used in wiring diagrams and their meanings. 2. Diagrams of single-pole, two-pole, three-pole, and four-pole circuit breakers with thermomagnetic or electronic trip units. 3. Diagrams and explanations of shunt opening and undervoltage releases, and auxiliary contacts for circuit breakers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    Wiring diagrams

    Content
    Information for reading and graphic symbols . ................................................................... 5/2
    Wiring diagrams of the circuit-breakers............................................................................... 5/3
    Electrical accessories........................................................................................................... 5/4

    5/1
    1SDC210032D0202

    Information for reading and graphic symbols

    State of operation represented


    The diagram is shown under the following conditions:
    - circuit-breaker open;
    - circuits without voltage;
    - trip units not tripped.
    Incompatibility
    A1 A2
    Accessory circuits cannot be supplied with single-pole circuit-breakers.
    The applications indicated in figures 1-2-6, which are supplied as an alternative, can be supplied with two-pole circuit-breakers.
    All the applications indicated in the figures can be supplied with three-pole and four-pole
    circuit-breakers. Figures 1-2-3-4 are provided as an alternative. Figures 5-6 are provided as
    an alternative.
    A3
    The circuits indicated in the following figures cannot be supplied at the same time on the
    same circuit-breaker:
    1-2-3-4
    5-6

    Graphic Symbols (IEC 60617 and CEI 3-143-26 Standards)

    Thermal effect

    Terminal

    Change-over break before


    make contact

    Electromagnetic effect

    Plug and socket


    (male and female)

    Circuit-breaker with
    automatic release

    Mechanical connection (link)

    Resistor (general symbol)

    Operating device
    (general symbol)

    Operated by pushing

    Current transformer

    Instantaneous overcurrent
    or rate-of-rise relay

    Operated by turning

    Make contact

    Overcurrent relay with inverse


    long time-lag characteristic

    Connection of conductors

    Break contact

    5/2
    1SDC210032D0202

    Wiring diagrams of the circuit-breakers

    Operating status A1 A2

    Single-pole circuit-breaker with


    thermomagnetic trip unit

    Two-pole circuit-breaker with


    thermomagnetic trip unit

    Three-pole circuit-breaker with


    thermomagnetic trip unit

    Four-pole circuit-breaker with


    thermomagnetic trip unit

    Operating status A3

    Three-pole/four-pole circuit-breaker with thermomagnetic trip unit

    Three-pole/four-pole circuit-breaker with electronic trip unit

    Caption
    Q
    =
    K51
    =


    TI/L1
    =
    TI/L2
    =
    TI/L3
    =
    TI/N
    =
    X0
    =
    YO1
    =

    Main circuit-breaker
    Electronic trip unit ELT LI, with the following protection functions:
    L overload protection with inverse long time-delay trip
    I short-circuit protection with instantaneous time-delay trip
    Current transformer placed on phase L1
    Current transformer placed on phase L2
    Current transformer placed on phase L3
    Current transformer placed on the neutral
    Connector for the YO1 trip coil
    Trip coil of the electronic trip unit

    5/3
    1SDC210032D0202

    Electrical accessories

    Shunt opening and undervoltage releases A1 A2

    Figure:
    1)
    2)
    3)
    4)

    Shunt opening release (SOR-C o YO)


    Undervoltage release (UVR-C o YU)
    Instantaneous undervoltage release with an early contact in series (AUE-C+UVR-C)
    Instantaneous undervoltage release with two early contacts in series (AUE-C+UVR-C)

    Notes
    B) The undervoltage release is supplied for power supply branched on the supply side of the circuit-breaker
    or from an independent source: circuit-breaker closing is only allowed with the release energised (the
    lock on closing is made mechanically).
    C) The S4/1 and S4/2 contacts shown in figures 3-4 open the circuit with circuit-breaker open and
    close it when a manual closing command is given by means of the rotary handle in accordance with
    the Standards regarding machine tools (closing does not take place in any case if the undervoltage
    release is not supplied).
    F) Additional external undervoltage resistor supplied at 250V DC or 380/440V AC.

    Caption
    Q/0
    =
    R
    =
    S4/1-2
    =
    SO
    =
    V1
    =
    V4
    =

    XV
    =
    YO
    =
    YU
    =

    5/4
    1SDC210032D0202

    Circuit-breaker auxiliary contacts


    Resistor (see note F)
    Early auxiliary contacts activated by the rotary handle of the circuit-breaker (see note C)
    Pushbutton or contact for opening the circuit-breaker
    Circuit-breaker applications
    Indicative apparatus and connections for control and signalling, outside
    the circuit-breaker
    Terminal boards of the applications
    Shunt opening release (SOR-C)
    Undervoltage release (UVR-C) (see notes B and C)

    Shunt opening and undervoltage releases A3

    Figure:
    1)
    2)
    3)
    4)

    Shunt opening release (SOR-C o YO)


    Undervoltage release (UVR-C o YU)
    Instantaneous undervoltage release with an early contact in series (AUE-C+UVR-C)
    Instantaneous undervoltage release with two early contacts in series (AUE-C+UVR-C)

    Notes
    B) The undervoltage release is supplied for power supply branched on the supply side of the circuit-breaker
    or from an independent source: circuit-breaker closing is only allowed with the release energised (the
    lock on closing is made mechanically).
    C) The S4/1 and S4/2 contacts shown in figures 3-4 open the circuit with circuit-breaker open and
    close it when a manual closing command is given by means of the rotary handle in accordance with
    the Standards regarding machine tools (closing does not take place in any case if the undervoltage
    release is not supplied).
    F) Additional external undervoltage resistor supplied at 250V DC or 380/440V AC.

    Caption
    Q/0
    =
    R
    =
    S4/1-2
    =
    SO
    =
    V1
    =
    V4
    =

    XV
    =
    YO
    =
    YU
    =
    X1, X8
    =

    Circuit-breaker auxiliary contacts


    Resistor (see note F)
    Early auxiliary contacts activated by the rotary handle of the circuit-breaker (see note C)
    Pushbutton or contact for opening the circuit-breaker
    Circuit-breaker applications
    Indicative apparatus and connections for control and signalling, outside
    the circuit-breaker
    Terminal boards of the applications
    Shunt opening release (SOR-C)
    Undervoltage release (UVR-C) (see notes B and C)
    Connectors for the circuit-breaker auxiliary circuits
    5/5
    1SDC210032D0202

    Electrical accessories

    Auxiliary contacts A1 A2

    Figure:
    5) Two changeover contacts for electrical signalling of circuit-breaker open/closed and one changeover
    contact for signalling circuit-breaker in tripped position due to thermomagnetic trip unit or SOR-C or
    UVR-C intervention (2Q+1SY)
    6) One changeover contact for electrical signalling of circuit-breaker open/closed and one changeover
    contact for signalling circuit-breaker in tripped position due to thermomagnetic trip unit or SOR-C or
    UVR-C intervention (1Q+1SY)

    Caption
    Q/1, 2
    SY
    V1
    V4
    XV

    5/6
    1SDC210032D0202

    = Circuit-breaker auxiliary contacts


    = Contact for electrical signalling circuit-breaker open due to trip of the thermomagnetic trip
    unit YO (SOR-C), YU (UVR-C) (tripped position)
    = Circuit-breaker applications
    = Indicative apparatus and connections for control and signalling, outside the circuit-breaker
    = Terminal boards of the applications

    Auxiliary contacts A3

    Figure:
    5) Three changeover contacts for electrical signalling of circuit-breaker open/closed and one changeover contact for signalling circuit-breaker in tripped position due to thermomagnetic trip unit or SORC or UVR-C intervention (3Q+1SY)
    6) One changeover contact for electrical signalling of circuit-breaker open/closed and one changeover
    contact for signalling circuit-breaker in tripped position due to thermomagnetic trip unit or SOR-C or
    UVR-C intervention (1Q+1SY)

    Caption
    Q/1, 2, 3 = Circuit-breaker auxiliary contacts
    SY
    = Contact for electrical signalling circuit-breaker open due to trip of the thermomagnetic trip
    unit YO (SOR-C), YU (UVR-C) (tripped position)
    V1
    = Circuit-breaker applications
    V4
    = Indicative apparatus and connections for control and signalling, outside the circuit-breaker
    XV
    = Terminal boards of the applications
    X2, X7
    = Connectors for the circuit-breaker auxiliary circuits

    5/7
    1SDC210032D0202

    You might also like