Ua 78 L 05 A
Ua 78 L 05 A
www.ti.com
FEATURES
DESCRIPTION
3-Terminal Regulators
Output Current up to 100 mA
No External Components
Internal Thermal-Overload Protection
Internal Short-Circuit Current Limiting
D PACKAGE
(TOP VIEW)
OUTPUT
COMMON
COMMON
NC
INPUT
COMMON
COMMON
NC
PK PACKAGE
(TOP VIEW)
INPUT
INPUT
COMMON
COMMON
OUTPUT
OUTPUT
NC No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
A78L00
SLVS010U JANUARY 1976 REVISED MAY 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Schematic
INPUT
20 k
OUTPUT
1 k to 14 k
1.4 k
COMMON
NOTE: Resistor values shown are nominal.
A78L00
www.ti.com
Input voltage
TJ
Tstg
(1)
MAX
30
35
65
UNIT
V
150
150
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
JC
JA
SOIC (D)
39C/W
97C/W
TO-92/TO-226AA (LP)
55C/W
140C/W
SOT-89 (PK)
9C/W
52C/W
PACKAGE
(1)
Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. Due to variations in
individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power
levels slightly above or below the rated dissipation.
MAX
4.75
20
A78L05C, A78L05AC
20
A78L06C, A78L06AC
8.5
20
A78L08C, A78L08AC
10.5
23
A78L09C, A78L09AC
11.5
24
A78L10AC
12.5
25
A78L12C, A78L12AC
14.5
27
A78L15C, A78L15AC
17.5
30
A78L02AC
VI
IO
TJ
Input voltage
Output current
Operating virtual junction temperature
100
A78LxxC and A78LxxAC series
A78L05AI
125
40
125
UNIT
mA
C
A78L00
SLVS010U JANUARY 1976 REVISED MAY 2011
www.ti.com
VI = 4.75 V to 20 V, IO = 1 mA to 40 mA
Output voltage
IO = 1 mA to 70 mA
VI = 4.75 V to 20 V
VI = 6 V to 20 V, f = 120 Hz
IO = 1 mA to 100 mA
2.6
f = 10 Hz to 100 kHz
2.5
2.45
2.75
0C to 125C
2.45
2.75
43
100
16
75
51
50
25
30
25C
1.7
25C
3.6
IO = 1 mA to 40 mA
mV
mV
V
V
6
5.5
2.5
0C to 125C
dB
12
25C
UNIT
2.7
20
125C
VI = 5 V to 20 V
MAX
25C
25C
IO = 1 mA to 40 mA
Bias current
(1)
TYP
0C to 125C
25C
Dropout voltage
MIN
25C
VI = 5 V to 20 V
Ripple rejection
A78L02AC
TJ (1)
TEST CONDITIONS
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
Output voltage
TEST CONDITIONS
MIN
TYP
5
UNIT
MAX
4.6
5.4
4.8
4.5
5.5
4.75
5.25
IO = 1 mA to 70 mA
Full range
4.5
5.5
4.75
5.25
VI = 8 V to 18 V, f = 120 Hz
Output voltage
regulation
IO = 1 mA to 100 mA
VI = 8 V to 20 V
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
Dropout voltage
Bias current
MAX
25C
Ripple rejection
(1)
TYP
Full range
VI = 7 V to 20 V
Bias current
change
MIN
VI = 7 V to 20 V,
IO = 1 mA to 40 mA
Input voltage
regulation
Output noise
voltage
A78L05AC
A78L05AI
A78L05C
TJ (1)
25C
25C
25C
40
32
200
32
150
26
150
26
100
49
IO = 1 mA to 40 mA
41
49
60
15
60
30
30
25C
42
25C
1.7
25C
3.8
Full range
mV
dB
15
125C
VI = 8 V to 20 V
5.2
mV
V
42
1.7
6
3.8
V
6
5.5
5.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output. Full range for the
A78L05AC is TJ = 0C to 125C, and full range for the A78L05AI is TJ = 40C to 125C.
A78L00
www.ti.com
Output voltage
Input voltage
regulation
Ripple rejection
Output voltage
regulation
Output noise
voltage
TJ (1)
TEST CONDITIONS
MIN
TYP
MAX
MIN
TYP
MAX
6.2
6.2
6.45
25C
5.7
6.7
5.95
0C to 125C
5.6
6.8
5.9
6.5
IO = 1 mA to 70 mA
0C to 125C
5.6
6.8
5.9
6.5
VI = 8.5 V to 20 V
25C
VI = 9 V to 20 V
VI = 10 V to 20 V,
f = 120 Hz
25C
IO = 1 mA to 100 mA
39
25C
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
Bias current
(1)
A78L06AC
VI = 8.5 V to 20 V,
IO = 1 mA to 40 mA
Dropout voltage
Bias current
change
A78L06C
35
200
35
175
29
150
29
125
48
IO = 1 mA to 40 mA
48
80
16
80
40
40
25C
46
25C
1.7
25C
3.9
0C to 125C
mV
mV
V
46
1.7
6
dB
16
125C
VI = 9 V to 20 V
40
UNIT
3.9
5.5
5.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
Output voltage
Input voltage
regulation
Ripple rejection
Output voltage
regulation
Output noise
voltage
TEST CONDITIONS
TYP
MAX
MIN
TYP
MAX
8.64
7.7
8.3
8.8
7.6
8.8
7.6
25C
7.36
7.2
IO = 1 mA to 70 mA
0C to 125C
7.2
VI = 10.5 V to 23 V
VI = 11 V to 23 V
VI = 13 V to 23 V,
f = 120 Hz
IO = 1 mA to 100 mA
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
25C
25C
25C
36
IO = 1 mA to 40 mA
8.4
200
42
175
36
150
36
125
46
37
46
80
18
80
10
40
10
40
54
25C
1.7
25C
0C to 125C
mV
mV
V
54
1.7
6
dB
18
25C
UNIT
8.4
42
125C
VI = 11 V to 23 V
A78L08AC
MIN
0C to 125C
Bias current
(1)
A78L08C
VI = 10.5 V to 23 V,
IO = 1 mA to 40 mA
Dropout voltage
Bias current
change
TJ (1)
5.5
5.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
A78L00
SLVS010U JANUARY 1976 REVISED MAY 2011
www.ti.com
Output voltage
Input voltage
regulation
Ripple rejection
Output voltage
regulation
Output noise
voltage
TJ (1)
TEST CONDITIONS
MIN
TYP
MAX
MIN
TYP
9
MAX
25C
8.3
9.7
8.6
0C to 125C
8.1
9.9
8.55
9.45
IO = 1 mA to 70 mA
0C to 125C
8.1
9.9
8.55
9.45
VI = 12 V to 24 V
25C
VI = 13 V to 24 V
VI = 15 V to 25 V,
f = 120 Hz
25C
IO = 1 mA to 100 mA
25C
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
Bias current
(1)
A78L09AC
VI = 12 V to 24 V,
IO = 1 mA to 40 mA
Dropout voltage
Bias current
change
A78L09C
36
225
45
175
40
175
40
125
38
90
19
90
40
11
40
25C
58
25C
1.7
25C
4.1
mV
mV
V
58
1.7
6
dB
11
0C to 125C
IO = 1 mA to 40 mA
45
19
125C
VI = 13 V to 24 V
9.4
45
45
UNIT
4.1
5.5
5.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
Output voltage
VI = 13 V to 25 V, IO = 1 mA to 40 mA
IO = 1 mA to 70 mA
VI = 13 V to 25 V
VI = 15 V to 25 V, f = 120 Hz
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
Dropout voltage
Bias current
Bias current change
(1)
IO = 1 mA to 40 mA
TYP
MAX
10
10.4
25C
9.6
0C to 125C
9.5
0C to 125C
9.5
25C
37
25C
10.5
175
42
125
44
90
11
40
25C
1.7
25C
4.2
mV
dB
20
62
0C to 125C
UNIT
10.5
51
25C
125C
VI = 14 V to 25 V
MIN
25C
VI = 14 V to 25 V
IO = 1 mA to 100 mA
A78L10AC
TJ (1)
TEST CONDITIONS
mV
V
V
6
5.5
1.5
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
A78L00
www.ti.com
Output voltage
Input voltage
regulation
Ripple rejection
Output voltage
regulation
Output noise
voltage
TJ (1)
TEST CONDITIONS
MIN
TYP
MAX
MIN
TYP
MAX
12
12
12.5
25C
11.1
12.9
11.5
0C to 125C
10.8
13.2
11.4
12.6
IO = 1 mA to 70 mA
0C to 125C
10.8
13.2
11.4
12.6
VI = 14.5 V to 27 V
25C
VI = 16 V to 27 V
VI = 15 V to 25 V,
f = 120 Hz
25C
IO = 1 mA to 100 mA
36
25C
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
Bias current
(1)
A78L12AC
VI = 14 V to 27 V,
IO = 1 mA to 40 mA
Dropout voltage
Bias current
change
A78L12C
55
250
55
250
49
200
49
200
42
IO = 1 mA to 40 mA
42
100
22
100
13
50
13
50
25C
70
25C
1.7
25C
4.3
0C to 125C
1.7
4.3
mV
mV
V
70
6.5
dB
22
125C
VI = 16 V to 27 V
37
UNIT
V
6.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
Output voltage
Input voltage
regulation
Ripple rejection
Output voltage
regulation
Output noise
voltage
TEST CONDITIONS
TYP
MAX
15
25C
13.8
13.5
IO = 1 mA to 70 mA
0C to 125C
13.5
VI = 17.5 V to 30 V
VI = 20 V to 30 V
VI = 18.5 V to 28.5 V,
f = 120 Hz
IO = 1 mA to 100 mA
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
25C
25C
25C
33
IO = 1 mA to 40 mA
MIN
TYP
16.2
14.4
15
16.5
14.25
16.5
14.25
MAX
65
300
58
250
58
250
34
39
150
25
150
15
75
15
75
82
25C
1.7
25C
4.6
0C to 125C
1.7
4.6
mV
V
82
6.5
mV
dB
25
25C
15.75
300
39
UNIT
15.6
15.75
65
125C
VI = 10 V to 30 V
A78L15AC
MIN
0C to 125C
Bias current
(1)
A78L15C
VI = 17.5 V to 30 V,
IO = 1 mA to 40 mA
Dropout voltage
Bias current
change
TJ (1)
V
6.5
1.5
1.5
0.2
0.1
mA
mA
Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All
characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across the output.
A78L00
SLVS010U JANUARY 1976 REVISED MAY 2011
www.ti.com
APPLICATION INFORMATION
A78Lxx
VI
VO
0.33 F
0.1 F
IN
A78Lxx
VI
OUT
G
IL
COM
-V O
Input
Output
A78Lxx
R1
IO
0.33 F
0.1 F
R2
A78Lxx
Input
0.33 F
R1
VO(Reg)
Output
IO
IO = (VO/R1) + IO Bias Current
A78L00
www.ti.com
1N4001
20-V Input
A78L15
0.33 F
VO = 15 V
1N4001
0.1 F
0.1 F
0.33 F
-20-V Input
1N4001
A79L15
VO = -15 V
1N4001
VI
VO
1N4001
or
Equivalent
-V O
Reverse-Bias Protection
Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for
example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is
greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could
break down and be damaged. To prevent this, a diode shunt can be employed as shown in Figure 7.
VI
A78Lxx
VO
A78L00
SLVS010U JANUARY 1976 REVISED MAY 2011
www.ti.com
REVISION HISTORY
Changes from Revision T (May 2011) to Revision U
Page
10
www.ti.com
24-Aug-2014
PACKAGING INFORMATION
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L02ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L02A
UA78L02ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L02A
UA78L02ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L02AC
UA78L02ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L02AC
UA78L05ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACDE4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05A
UA78L05ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACLPM
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACLPME3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05AC
UA78L05ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F5
Addendum-Page 1
Samples
www.ti.com
24-Aug-2014
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L05ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
UA78L05AID
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
78L05AI
UA78L05AIDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
78L05AI
UA78L05AIDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
78L05AI
UA78L05AIDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
78L05AI
UA78L05AIDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
78L05AI
UA78L05AILP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
-40 to 125
78L05AI
UA78L05AILPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
-40 to 125
78L05AI
UA78L05AILPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
-40 to 125
78L05AI
UA78L05AILPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
-40 to 125
78L05AI
UA78L05AIPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
-40 to 125
J5
UA78L05AIPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
-40 to 125
J5
UA78L05AQD
OBSOLETE
SOIC
TBD
Call TI
Call TI
UA78L05AQDR
OBSOLETE
SOIC
TBD
Call TI
Call TI
UA78L05CD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05C
UA78L05CDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05C
UA78L05CDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05C
UA78L05CDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05C
UA78L05CDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L05C
Addendum-Page 2
F5
Samples
www.ti.com
24-Aug-2014
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L05CLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05C
UA78L05CLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05C
UA78L05CLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L05C
UA78L05CPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
B5
UA78L05CPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
B5
UA78L05QLP
OBSOLETE
TO-92
LP
TBD
Call TI
Call TI
UA78L05QLPR
OBSOLETE
TO-92
LP
TBD
Call TI
Call TI
UA78L06ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L06AC
UA78L06ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L06AC
UA78L06ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L06AC
UA78L06ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L06AC
UA78L06ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F6
UA78L06ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F6
UA78L08ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L08A
UA78L08ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L08A
UA78L08ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 125
78L08A
UA78L08ACDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L08A
UA78L08ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L08AC
UA78L08ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L08AC
Addendum-Page 3
Samples
www.ti.com
24-Aug-2014
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L08ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L08AC
UA78L08ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L08AC
UA78L08ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F8
UA78L08ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F8
UA78L08AILP
OBSOLETE
TO-92
LP
TBD
Call TI
Call TI
UA78L08AQDR
OBSOLETE
SOIC
TBD
Call TI
Call TI
UA78L08CLP
OBSOLETE
TO-92
LP
TBD
Call TI
Call TI
0 to 125
UA78L08CPK
OBSOLETE
SOT-89
PK
TBD
Call TI
Call TI
0 to 125
UA78L09ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L09A
UA78L09ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L09A
UA78L09ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L09A
UA78L09ACDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L09A
UA78L09ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L09AC
UA78L09ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L09AC
UA78L09ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L09AC
UA78L09ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L09AC
UA78L09ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F9
UA78L09ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
F9
UA78L10ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L10A
UA78L10ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L10A
Addendum-Page 4
Samples
www.ti.com
24-Aug-2014
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L10ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L10A
UA78L10ACDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L10A
UA78L10ACDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L10A
UA78L10ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L10AC
UA78L10ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L10AC
UA78L10ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L10AC
UA78L10ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L10AC
UA78L10ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FA
UA78L10ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FA
UA78L12ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L12A
UA78L12ACDG4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L12A
UA78L12ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 125
78L12A
UA78L12ACDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L12A
UA78L12ACDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L12A
UA78L12ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
UA78L12ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
UA78L12ACLPM
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
UA78L12ACLPME3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
Addendum-Page 5
Samples
www.ti.com
24-Aug-2014
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA78L12ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
UA78L12ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L12AC
UA78L12ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FC
UA78L12ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FC
UA78L12AQDR
OBSOLETE
SOIC
TBD
Call TI
Call TI
UA78L12AQLPR
OBSOLETE
TO-92
LP
TBD
Call TI
Call TI
UA78L15ACD
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L15A
UA78L15ACDE4
ACTIVE
SOIC
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L15A
UA78L15ACDR
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L15A
UA78L15ACDRE4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L15A
UA78L15ACDRG4
ACTIVE
SOIC
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 125
78L15A
UA78L15ACLP
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L15AC
UA78L15ACLPE3
ACTIVE
TO-92
LP
1000
Pb-Free
(RoHS)
CU SN
0 to 125
78L15AC
UA78L15ACLPR
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L15AC
UA78L15ACLPRE3
ACTIVE
TO-92
LP
2000
Pb-Free
(RoHS)
CU SN
0 to 125
78L15AC
UA78L15ACPK
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FF
UA78L15ACPKG3
ACTIVE
SOT-89
PK
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-2-260C-1 YEAR
0 to 125
FF
(1)
Samples
www.ti.com
24-Aug-2014
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 7
18-Aug-2014
Device
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
UA78L05ACDR
SOIC
2500
330.0
12.8
6.4
5.2
2.1
8.0
12.0
Q1
UA78L05ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L05ACDRG4
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L05ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L05AIDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L05AIPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L05CDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L05CPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L06ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L08ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L08ACDR
SOIC
2500
330.0
12.8
6.4
5.2
2.1
8.0
12.0
Q1
UA78L08ACDRG4
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L08ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L09ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L09ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L10ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L10ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L12ACDR
SOIC
2500
330.0
12.8
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
18-Aug-2014
Device
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
UA78L12ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L12ACDRG4
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L12ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
UA78L15ACDR
SOIC
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
UA78L15ACPK
SOT-89
PK
1000
180.0
12.4
4.91
4.52
1.9
8.0
12.0
Q3
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
UA78L05ACDR
SOIC
2500
364.0
364.0
27.0
UA78L05ACDR
SOIC
2500
340.5
338.1
20.6
UA78L05ACDRG4
SOIC
2500
340.5
338.1
20.6
UA78L05ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L05AIDR
SOIC
2500
340.5
338.1
20.6
UA78L05AIPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L05CDR
SOIC
2500
340.5
338.1
20.6
UA78L05CPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L06ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L08ACDR
SOIC
2500
340.5
338.1
20.6
UA78L08ACDR
SOIC
2500
364.0
364.0
27.0
UA78L08ACDRG4
SOIC
2500
340.5
338.1
20.6
Pack Materials-Page 2
18-Aug-2014
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
UA78L08ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L09ACDR
SOIC
2500
340.5
338.1
20.6
UA78L09ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L10ACDR
SOIC
2500
340.5
338.1
20.6
UA78L10ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L12ACDR
SOIC
2500
364.0
364.0
27.0
UA78L12ACDR
SOIC
2500
340.5
338.1
20.6
UA78L12ACDRG4
SOIC
2500
340.5
338.1
20.6
UA78L12ACPK
SOT-89
PK
1000
340.0
340.0
38.0
UA78L15ACDR
SOIC
2500
340.5
338.1
20.6
UA78L15ACPK
SOT-89
PK
1000
340.0
340.0
38.0
Pack Materials-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as components) are sold subject to TIs terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TIs terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TIs goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or enhanced plastic are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
www.ti.com/automotive
Amplifiers
amplifier.ti.com
www.ti.com/communications
Data Converters
dataconverter.ti.com
www.ti.com/computers
DLP Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
www.ti.com/energy
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
www.ti.com/video
RFID
www.ti-rfid.com
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright 2014, Texas Instruments Incorporated