Gotco Catalog

Contents
GOTCO
General Catalog
Gotco International, Inc. has manufactured
fishing tools and related down-hole equipment
for over twenty-five years. Gotcos product has
been distributed to over 75 countries on six
continents. This catalog contains a listing of
the most common tools and sizes.
Gotco also offers specialized manufacturing
and engineering services. Should a customer
have a specific requirement for nonstandard tools
or specialized application, Gotco can help solve
your problem. Gotco will manufacture tools to
specifications or assist in designing a tool specifically for a particular fishing operation.
Gotco International, Inc., is also a leading
manufacturer of O.E.M. and after-market brake
rims and brake bands. Print files are continuously updated and expanded to offer the latest
in technological advances. We are also available to modify your rims and bands per print
and specifications you supply. Gotco is also a
major distributor of brake blocks and linings.
Gotco International, Inc., within its manufacturing facility, maintains a complete service and
manufacturing shop. Gotco specializes also in
Hydraulic Bucking Units and Make-Up/BreakOut Units, offering a selection of standard sizes
and specifications or building according to a customers needs and specifications.
Gotco International, Inc. has also moved into
the coiled tubing market. Providing customers
with top of the line Coiled Tubing Units,
Nitrogen Units, Hydraulic Snubbing Units, as
well as a vast supply of down-hole coiled tubing tools and tubing hangers.
For additional information, or to receive
detailed technical manuals, contact the nearest
Gotco International, Inc. sales representative.
External Catch
Series 150 Releasing & Circulating Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Series 150 Overshot Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Series 70 Short-Catch Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Multi-Catch Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Sucker Rod Overshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Die Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Internal Catch
Taper Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Grapple Releasing Spear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Junk Catchers
Reverse Circulating Junk Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Jet Type Junk Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Core-Type Junk Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Fishing Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Ditch Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Impression Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Wireline Spear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Accessory Tools
Fishing Jar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Bumper Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Jar Impact Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Lubricated Bumper Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Drilling Safety Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Milling
Junk Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Junk Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Skirted Junk Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Pilot Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Combination Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Taper Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Boot Basket (Junk Subs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Washover Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Washover Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Washover Safety Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Lift Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Drive Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Rotary Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Remedial & Repair
Casing Patch, Lead-Seal Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Casing Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Casing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Cross-Over Sub (Rotary Sub) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Nitrogen Pumping
Nitrogen Heat Recovery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Nitrogen Ambient Recovery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Model 180-10-HTRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Model 100-10-AMB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Coiled Tubing Units
Injector Head Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Control Cabin Skid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Power Pack Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Tubing Reel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Circulating Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
EZ-Tork Make-Up/Break-Out Unit
Model EZ-TORK 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Star Tork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
FAZTORK Make-Up/Break-Out Unit
Model Faztork 40,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Model Faztork 60,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
CT Hangers & Products
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Product Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Brake Rims & Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Gotco Representatives . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inside Back Cover
www.gotco-usa.com
External Catch Series 150 Releasing & Circulating Overshot
Series 150 Overshot
Assembly and
Operation
The Gotco Series 150 Releasing and Circulating Overshot is an

external catch fishing tool designed to retrieve tubular items from
the well bore. It is rugged, economical, and easy to use. Gotco
overshots come with a wide range of available accessories. These
fishing tools have proven to be the most versatile and reliable in
the field.
Spiral Catch Equipment

Place the type A packer (with
inside lip pointed up) in overshot
bowl between upper thread and
helix. (Note: The lower end of
overshot bowl has a longitudinal
slot cut into helix.) Assemble top
sub to overshot bowl. Thread spiral grapple into left-hand helix in
overshot bowl. Stop threading
when the grapple has fully entered
the helix and the grapple tang has
aligned with the keyway in the
bowl. Slide the grapple control,
tang end first, into overshot bowl
until the grapple control tang
slides beside tang on grapple.
Grapple tang also slides into slot
in grapple control. Now assemble
the guide to overshot bowl.
Basket Catch Equipment
Assemble top sub to overshot
bowl. Thread basket grapple into
left-hand helix in overshot bowl.
Stop threading when the grapple
has fully entered the helix and the
slot in grapple has aligned with
keyway in the bowl. The inside lip
on inner seal must point up in the
grapple control. Outer seal must
be placed around lower end of
grapple control. Now slide grapple control into bowl (tang end
first) so that the tang engages the
slots in both the bowl and basket
grapple. Assemble guide to overshot bowl.
Operation The overshot
should be equipped with the
proper size grapple and related
equipment. Hole size or damage
to the fish may necessitate using
an oversized guide, wall hook
guide, extension sub, or milling
shoe. See Optional Components.
Engagement and Retrieval
of Fish Attach the overshot to
the bottom of the fishing string and
run in the hole. When the overshot
nears the top of the fish, engage it
by slowly rotating to the right while
gradually lowering the fishing
string. To pull up the fish, release
any right-hand torque in the fishing
string. Circulation through the fish
may be used to help retrieve it. If
applying torque to the fish, main-
Construction
The basic assembly consists of
a top sub, bowl, and standard
guide. The internal components are
used to establish a secure grip on
the fish to retrieve it easily. The
selection of these components is
determined by the diameter of the
fish to be retrieved. When the fish
diameter approaches the maximum catch of the overshot, a spiral
grapple is required. This must also
be equipped with a spiral grapple
control and type A packer. When
the diameter is approximately 1/2
inch (or more) under the maximum
catch of the overshot, a basket
grapple is used. It must be assembled with either a basket grapple
control or a mill control packer.
Type A Packer
Spiral Grapple
Series 150
Spiral Grapple
Overshot
Spiral Grapple
Control
www.gotco-usa.com
tain an upward strain while the

fishing string rotates; this will
maintain grapple engagement.
Release of Fish Bump
down the full weight of fishing
string. Rotate to the right while
picking up slowly. The left-hand
wicker threads on the inner surface of the grapple will allow the
grapple to unscrew from the fish.
Standard Components
Top sub The top sub is
the uppermost component of the
assembly. It is equipped with a
box connection, as specified by
the customer, to assure proper
make-up with the fishing string.
Bowl The bowl is the
major working component of the
overshot. The upper end of the
bowl is threaded for assembly
with the top sub. The lower end is
threaded for assembly with the
standard guide. A helix-shaped
configuration inside the overshot
bowl provides a tapered spiral
surface on which the grapple will
be assembled. Once the grapple
has engaged the fish, an upward
strain will cause the grapple to be
compressed by the movement of
the matching tapers. The greater
the pull, the stronger the grip. The
strain is evenly distributed over
the entire working surface of the
bowl and the grapple. This minimizes any possible damage to the
bowl or the fish.
Standard guide The standard guide is the lowermost component of the assembly. It guides
the fish into the overshot, allowing the internal gripping mechanism to properly engage and grip
the fish. The guide also prohibits
the entry of a fish that exceeds the
maximum catch of the overshot.
This minimizes any possible
damage to the overshot assembly.
Spiral Grapple The spiral grapple is a left-hand helix
that conforms to the inside of the
overshot bowl. Specially hardened wicker threads assure a positive grip to engage the fish
securely.
Basket Grapple The basket grapple is a slotted cylinder
Series 150 Releasing & Circulating Overshot
with an external helix that conforms to the interior of the overshot bowl. Specially hardened
wicker threads assure a positive
grip to engage the fish securely.
Three types of basket grapples
are available:
The standard basket grapple is
used to catch a fish with a uniform outside diameter. The fish
passes completely through the
grapple during engagement. This
type of grapple is standard equipment.
The long catch stop basket
grapple has an internal shoulder
at its upper end to prevent the fish
from passing completely through
the grapple. When engaging a
coupling or upset section of a tool
joint, this shoulder positions the
control packer for optimum packoff around the fish.
The short catch stop basket
grapple has two sets of internal
wickers cut on different diameters.
It is used to engage a coupling
with a short section of pipe pro-
truding above it. The upper or

smaller diameter wickers catch the
pipe above the collar, providing a
stop against the coupling so that it
can be caught by the lower set of
wickers and packed-off by the
control packer.
Grapple Controls Grapple
controls transmit torque from the
overshot bowl to the grapple
while allowing the grapple to
move vertically inside the bowl.
Spiral grapple controls are
furnished without milling teeth or
a pack-off mechanism.
Basket grapple controls can be
furnished plain, with pack-off
capabilities, or with milling teeth
and pack-off capabilities.
Pack-off Mechanism A
pack-off mechanism is necessary
if circulation is required during
the fishing operation. Packing off
assures circulation through, rather
than around, the fish. The packoff system employed will depend
on the type of grapple selected. If
the overshot is equipped with a
External Catch
spiral grapple, a type A packer is

used to seal between the overshot
bowl and the fish. If a basket
grapple is used, pack-off is
achieved by the inner seal on the
control packer.
Basket Grapple
Control Packer
How to Order Gotco Series 150 Overshots
When ordering, please specify:

Name and part number of assembly
Top connection required
O.D. of fish to be retrieved
O.D. of tool, if nonstandard
Recommended Spares
Spiral: 3 packers, 2 grapples, and 2 controls
Basket: 2 grapples, 2 mill control packers
Mill Control Packer: 3 inner and outer seals
www.gotco-usa.com
Mill Control
Packer
Inner Seal
Series 150
Basket Grapple
Overshot
Gotco Series 150 Overshots

Maximum Spiral Catch
2
Maximum Basket Catch
13/4
Overshot O.D.
25/16
Type
S.H.
Gotco Assembly
Part No. OS-20
XRef. No. B8919
Basic Replacement Parts
Top Sub
Part No. OS-20-3
XRef. No. A8920
Bowl
Part No. OS-20-1
XRef. No. B8921
Standard Guide
Part No. OS-20-2
XRef. No. L9404
Spiral Replacement Parts
Spiral Grapple
Part No. OS-20-8
XRef. No. L9403
Spiral Grapple
Part No. OS-20-7
Control
XRef. No. L9405
Type A Packer
Part No. OS-20-6
XRef. No. L9407
Basket Replacement Parts
Basket Grapple
Part No. OS-20-4
XRef. No. L9403
Basket Grapple
Part No. OS-20-5C
Control
XRef. No. L9405
Mill Control Packer Part No. OS-20-5M
XRef. No. 9407M
27/8
23/8
Overshot O.D.
41/8
Type
F.S.
Gotco Assembly
Part No. OS-45
XRef. No. 4390
Top Sub
Part No. OS-45-3
XRef. No. 4391
Bowl
Part No. OS-45-1
XRef. No. 4392
Standard Guide
Part No. OS-45-2
XRef. No. 4393
Spiral Grapple
Part No. OS-45-8
XRef. No. 805
Spiral Grapple
Part No. OS-45-7
Control
XRef. No. 806
Type A Packer
Part No. OS-45-6
XRef. No. 4398
Basket Grapple
Part No. OS-45-4
XRef. No. 805
Basket Grapple
Part No. OS-45-5C
Control
XRef. No. 806
XRef. No. 4398R
21/8
13/4
25/8
S.H.
OS-22
C10199
21/8
13/4
27/8
S.H.
OS-25
16395
23/8
2
31/8
X.S.H.
OS-23
9305
23/8
17/8
31/2
F.S.
OS-24
C4741
23/8
17/8
41/8
F.S.
OS-40
1443
21/2
2
33/8
S.H.
OS-30
C4623
21/2
2
35/8
F.S.
OS-21
C5080
27/8
21/2
35/8
X.S.H.
OS-2
9270
27/8
23/8
33/4
S.H.
OS-27
C1827
27/8
23/8
4
F.S.
OS-43
C4736
OS-22-3
A10200
OS-22-1
B10201
OS-22-2
A10206
OS-25-3
16396
OS-25-1
16397
OS-25-2
16394
OS-23-3
9311
OS-23-1
9306
OS-23-2
9312
OS-24-3
B4742
OS-24-1
B4743
OS-24-2
A4745
OS-40-3
1445
OS-40-1
1446
OS-40-2
1450
OS-30-3
A5083
OS-30-1
B5088
OS-30-2
A5093
OS-21-3
A5081
OS-21-1
B5082
OS-21-2
A5087
OS-2-3
9276
OS-2-1
9271
OS-2-2
9275
OS-27-3
A1834
OS-27-1
B1828
OS-27-2
A1833
OS-43-3
A4737
OS-43-1
B4738
OS-43-2
A4740
OS-22-8
B10204
OS-22-7
A10205
OS-22-6
B10202
OS-25-8
16392
OS-25-7
16393
OS-25-6
16398
OS-23-8
9307
OS-23-7
9308
OS-23-6
9309
OS-24-8
B782
OS-24-7
B783
OS-24-6
L1453
OS-40-8
1448
OS-40-7
1449
OS-40-6
1453
OS-30-8
B5091
OS-30-7
A5092
OS-30-6
B5089
OS-21-8
B5085
OS-21-7
A5086
OS-21-6
B3395
OS-2-8
9272
OS-2-7
9273
OS-2-6
8550
OS-27-8
A1829
OS-27-7
A1830
OS-27-6
A1831
OS-43-8
M805
OS-43-7
M806
OS-43-6
L809RS
OS-22-4
B10204
OS-22-5C
A10205
OS-22-5M
B10202R
OS-25-4
16392
OS-25-5C
16393
OS-25-5M
16398R
OS-23-4
9307
OS-23-5C
9308
OS-23-5M
9309R
OS-24-4
B782
OS-24-5C
B783
OS-24-5M
L1453R
OS-40-4
1448
OS-40-5C
1449
OS-40-5M
1453R
OS-30-4
B5091
OS-30-5C
A5092
OS-30-5M
B5089R
OS-21-4
B5085
OS-21-5C
A5086
OS-21-5M
B3395R
OS-2-4
9272
OS-2-5C
9273
OS-2-5M
8550R
OS-27-4
A1829
OS-27-5C
A1830
OS-27-5M
A1831R
OS-43-4
M805
OS-43-5C
M806
OS-43-5M
L809RS
31/16
211/16
33/4
S.H.
OS-1
37585
31/16
29/16
315/16
S.H.
OS-7
C5101
31/16
29/16
43/16
F.S.
OS-34
C5098
31/8
25/8
37/8
S.H.
OS-13
C1835
31/8
25/8
4
S.H.
OS-47
C5104
31/8
25/8
41/8
S.F.S.
OS-31
9105
31/8
25/8
41/8
F.S.
OS-39
8220
31/8
25/8
41/8
F.S.
OS-31
N9105
31/8
2 5/8
4 1/4
F.S.
OS-14
C4822
3 1/4
2 3/4
4 1/8
S.H.
OS-15
C5115
OS-1-3
37586
OS-1-1
37587
OS-1-2
37592
OS-7-3
A5102
OS-7-1
B5103
OS-7-2
A3598
OS-34-3
A5099
OS-34-1
B5100
OS-34-2
A4405
OS-13-3
A1842
OS-13-1
B1836
OS-13-2
A1841
OS-47-3
A5105
OS-47-1
B5106
OS-47-2
A5111
OS-31-3
9106
OS-31-1
9107
OS-31-2
1746
OS-39-3
8221
OS-39-1
8223
OS-39-2
1746
OS-31-3
L9106
OS-31-1
M9107
OS-31-2
L1746
OS 14-3
A4823
OS-14-1
B4824
OS-14-2
A793
OS-15-3
A5116
OS-15-1
B5117
OS-15-2
A5122
OS-1-8
37590
OS-1-7
37591
OS-1-6
37588
OS-7-8
B3596
OS-7-7
B3597
OS-7-6
B3594
OS-34-8
B4403
OS-34-7
B4404
OS-34-6
L7090
OS-13-8
B1837
OS-13-7
A1838
OS-13-6
B1839
OS-47-8
B5109
OS-47-7
A5110
OS-47-6
B5107
OS-31-8
1741
OS-31-7
1747
OS-31-6
809
OS-39-8
1741
OS-39-7
1747
OS-39-6
809
OS-31-8
M1741
OS-31-7
L1747
OS-31-6
L809
OS-14-8
B791
OS-14-7
B792
OS-14-6
L7090
OS-15-8
B5120
OS-15-7
A5121
OS-15-6
B5118
OS-1-4
37590
OS-1-5C
37591
OS-1-5M
37588R
OS-7-4
B3596
OS-7-5C
B3597
OS-7-5M
B3594R
OS-34-4
B4403
OS-34-5C
B4404
OS-34-5M
L7090R
OS-13-4
B1837
OS-13-5C
A1838
OS-13-5M
B1839R
OS-47-4
B5109
OS-47-5C
A5110
OS-47-5M
B5107R
OS-31-4
1741
OS-31-5C
1747
OS-31-5M
809R
OS-39-4
1741
OS-39-5C
1747
OS-39-5M
809R
OS-31-4
M1741
OS-31-5C
L1747
OS-31-5M
L809R
OS-14-4
B791
OS-14-5C
B792
OS -14-5M
L7090R
OS-15-4
B5120
OS -15-5C
A5121
OS-15-5M
B5118R
Notes: FS Full Strength XFS Extra Full Strength SFS Semi Full Strength SH Slim Hole XSH Extra Slim Hole
www.gotco-usa.com

3 1/4
2 3/4
Overshot O.D.
4 3/8
Type
F.S.
Gotco Assembly
Part No. OS-16
XRef. No. C5112
Top Sub
Part No. OS-16-3
XRef. No. A5113
Bowl
Part No. OS-16-1
XRef. No. B5114
Standard Guide
Part No. OS-16-2
XRef. No. A3207
Spiral Grapple
Part No. OS-16-8
XRef. No. B3205
Spiral Grapple
Part No. OS-16-7
Control
XRef. No. B3206
Type A Packer
Part No. OS-16-6
XRef. No. L1517
Basket Grapple
Part No. OS-16-4
XRef. No. B3205
Basket Grapple
Part No. OS-16-5C
Control
XRef. No. B3206
XRef. No. L1517R
321/32
3 1/8
Overshot O.D.
4 9/16
Type
S.H.
Gotco Assembly
Part No. OS-35
XRef. No. C5151
Top Sub
Part No. OS-35-3
XRef. No. A5152
Bowl
Part No. OS-35-1
XRef. No. B5153
Standard Guide
Part No. OS-35-2
XRef. No. A4341
Spiral Grapple
Part No. OS-35-8
XRef. No. B4339
Spiral Grapple
Part No. OS-35-7
Control
XRef. No. B4340
Type A Packer
Part No. OS-35-6
XRef. No. L6665
Basket Grapple
Part No. OS-35-4
XRef. No. B4339
Basket Grapple
Part No. OS-35-5C
Control
XRef. No. B4340
XRef. No. L6665R
External Catch
3 3/8
2 7/8
3 7/8
X.S.H.
OS-17
21300
3 3/8
2 7/8
4 1/4
S.H.
OS-18
C5126
3 3/8
2 7/8
4 3/8
F.S.
OS-37
9635
3 3/8
2 7/8
4 1/2
F.S.
OS-32
C5123
3 1/2
2 7/8
4 3/8
S.H.
OS-33
C4619
3 1/2
2 7/8
4 1/2
S.H.
OS-19
C3793
3 1/2
3
4 5/8
F.S.
OS-26
1255
3 1/2
2 7/8
4 13/16
F.S.
OS-38
C4732
3 1/2
2 7/8
5 1/8
F.S.
OS-50
C4561
321/32
3 1/8
4 1/2
S.H.
OS-28
17201
OS-17-3
21301
OS-17-1
21302
OS-17-2
21307
OS-18-3
A5127
OS-18-1
B5128
OS-18-2
A4629
OS-37-3
9636
OS-37-1
9637
OS-37-2
4197
OS-32-3
A5124
OS-32-1
B5125
OS-32-2
A3361
OS-33-3
A4620
OS-33-1
B4621
OS-33-2
A4622
OS-19-3
A3794
OS-19-1
A3795
OS-19-2
A3609
OS-26-3
1246
OS-26-1
1248
OS-26-2
1252
OS-38-3
A4733
OS-38-1
B4734
OS-38-2
A4735
OS-50-3
A4562
OS-50 -1
B4563
OS-50-2
A2176
OS-28-3
17202
OS-28-1
17203
OS-28-2
17204
OS-17-8
21305
OS-17-7
21306
OS-17-6
21303
OS-18-8
B4627
OS-18-7
B4628
OS-18-6
B4625
OS-37-8
4195
OS-37-7
4196
OS-37-6
4185
OS-32-8
B3359
OS-32-7
B3360
OS-32-6
L6515
OS-33-8
B3607
OS-33-7
B3608
OS-33-6
L7065
OS-19-8
B3607
OS-19-7
B3608
OS-19-6
L6515
OS-26-8
1249
OS-26-7
1250
OS-26-6
1253
OS-38-8
M164
OS-38-7
M185
OS-38-6
L168
OS-50-8
M164
OS-50-7
M185
OS-50-6
L168
OS-28-8
B4339
OS-28-7
B4340
OS-28-6
L6665
OS-17-4
21305
OS-17-5C
21306
OS-17-5M
21303R
OS-18-4
B4627
OS-18-5C
B4628
OS-18-5M
B4625R
OS-37-4
4195
OS-37-5C
4196
OS-37-5M
4185R
OS-32-4
B3359
OS-32-5C
B3360
OS-32-5M
L6515R
0S-33-4
B3607
OS-33-5C
B3608
OS-33-5M
L7065R
OS-19-4
B3607
OS-19-5C
B3608
OS-19-5M
L6515R
OS-26-4
1249
OS-26-5C
1250
OS-26-5M
1253R
OS-38-4
M164
OS-38-5C
M185
OS-38-5M
L168R
OS-50-4
M164
OS-50-5C
M185
OS-50-5M
L168R
OS-28-4
B4339
OS-28-5C
B4340
OS-28-5M
L6665R
321/32
3.220
4 11/16
S.F.S.
OS-3
9109
321/32
3 1/8
5
F.S.
OS-51
C5148
3 3/4
3 7/32
4 5/8
S.H.
OS-29
C5129
3 3/4
3 1/4
4 11/16
S.F.S.
OS-36
9120
3 3/4
3 1/8
5
F.S.
OS-52
9725
3 3/4
3 1/8
5 1/8
F.S.
OS-41
C4686
313/16
37/32
411/16
S.H.
OS-60
C9296
313/16
33/16
51/8
F.S.
OS-54
C7497
37/8
33/8
45/8
S.H.
OS-64
C6230
37/8
33/8
43/4
S.H.
OS-65
C5139
OS-3-3
9110
OS-3-1
9111
OS-3-2
6667
OS-51-3
A5149
OS-51-1
B5150
OS-51-2
A4412
OS-29-3
A5130
OS-29-1
B5131
OS-29-2
A5135
OS-36-3
9110
OS-36-1
9121
OS-36-2
9125
OS-52-3
9726
OS-52-1
9727
OS-52-2
816
OS-41-3
A4687
OS-41-1
B4688
OS-41-2
A816
OS-60-3
A9297
OS-60-1
B9298
OS-60-2
A9303
OS-54-3
A7498
OS-54-1
B7499
OS-54-2
A7501
OS-64-3
A6231
OS-64-1
B6232
OS-64-2
A6236
OS-65-3
A5140
OS-65-1
B5141
OS-65-2
A1711
OS-3-8
6662
OS-3-7
6674
OS-3-6
6665
OS-51-8
B4410
OS-51-7
B4411
OS-51-6
B3219
OS-29-8
B5133
OS-29-7
B5134
OS-29-6
B5538
OS-36-8
9123
OS-36-7
9124
OS-36-6
9122
OS-52-8
814
OS-52-7
815
OS-52-6
811
OS-41-8
B814
OS-41-7
A815
OS-41-6
A811
OS-60-8
B9301
OS-60-7
A9302
OS-60-6
B9299
OS-54-8
B2192
OS-54-7
B2193
OS-54-6
B2196
OS-64-8
B6234
OS-64-7
A6235
OS-64-6
A1707
OS-65-8
B1709
OS-65-7
A1710
OS-65-6
A1707
OS-3-4
6662
OS-3-5C
6674
OS-3-5M
6665R
OS-51-4
B4410
OS-51-5C
B4411
OS-51-5M
B3219R
OS-29-4
B5133
OS-29-5C
A5134
OS-29-5M
B5538R
OS-36-4
9123
OS-36-5C
9124
OS-36-5M
9122R
OS-52-4
814
OS-52-5C
815
OS-52-5M
811R
OS-41-4
B814
OS-41-5C
A815
OS-41-5M
A811R
OS-60-4
B9301
OS-60-5C
A9302
OS 60-5M
B9299R
OS-54-4
B2192
OS -54-5C
B2193
OS-54-5M
A2196R
OS-64-4
B6234
OS-64-5C
A6235
OS-64-5M
60947R
OS-65-4
B1709
OS-65-5C
A1710
OS-65-5M
A1707R
www.gotco-usa.com

37/8
31/4
Overshot O.D.
53/16
Type
F.S.
Gotco Assembly
Part No. OS-55
XRef. No. C5136
Top Sub
Part No. OS-55-3
XRef. No. A5137
Bowl
Part No. OS-55-1
XRef. No. B5138
Standard Guide
Part No. OS-55-2
XRef. No. 6876
Spiral Grapple
Part No. OS-55-8
XRef. No. M859
Spiral Grapple
Part No. OS-55-7
Control
XRef. No. L875
Type A Packer
Part No. OS-55-6
XRef. No. B972
Basket Grapple
Part No. OS-55-4
XRef. No. 7859
Basket Grapple
Part No OS-55-5C
Control
XRef. No. L875
XRef. No. B972R
41/2
37/8
Overshot O.D.
53/8
Type
S.H.
Gotco Assembly
Part No. OS-53
XRef. No. C5165
Top Sub
Part No. OS-53-3
XRef. No. A5166
Bowl
Part No. OS-53-1
XRef. No. B5167
Standard Guide
Part No. OS-53-2
XRef. No. B2491
Spiral Grapple
Part No. OS-53-8
XRef. No. B2489
Spiral Grapple
Part No. OS-53-7
Control
XRef. No. B2490
Type A Packer
Part No. OS-53-6
XRef. No. B2487
Basket Grapple
Part No. OS-53-4
XRef. No. B2489
Basket Grapple
Part No. OS-53-5C
Control
XRef. No. B2490
XRef. No. B2487R
37/8
31/4
51/4
F.S.
OS-5
9515
4
31/2
47/8
S.H.
OS-67
5168
4
31/2
47/8
S.H.
OS-67
C5154
4
33/8
55/16
F.S.
OS-56
C5142
41/8
35/8
5
S.H.
OS-57
C5428
41/8
31/2
57/16
F.S.
OS-44
C5425
41/4
33/4
51/8
S.H.
OS-59
C5162
41/4
33/4
51/8
S.H.
OS-69
4716
41/4
311/16
59/16
F.S.
OS-42
5896
41/4
311/16
59/16
F.S.
OS-70
C4819
OS-5-3
9516
OS-5-1
9517
OS-5-2
876
OS-67-3
5155
OS-67-1
5156
OS-67-2
5169
OS-67-3
A5155
OS-67-1
B5156
OS-67-2
A5161
OS-56-3
A5143
OS-56-1
B5144
OS-56-2
A1507
OS-57-3
A5429
OS-57-1
B5430
OS-57-2
B4899
OS-44-3
A5426
OS-44-1
B5427
OS-44-2
B1999
OS-59-3
A5163
OS-59 -1
B5164
OS-59-2
A4676
OS-69-3
4718
OS-69-1
4717
OS-69-2
4719
OS-42-3
5897
OS-42-1
5898
OS-42-2
187
OS-70-3
A4820
OS-70-1
B4821
OS-70-2
L187
OS-5-8
859
OS-5-7
875
OS-5-6
856
OS-67-8
5159
OS-67-7
5160
OS-67-6
5157
OS-67-8
B5159
OS-67-7
B5160
OS-67-6
B5157
OS-56-8
B1505
OS-56-7
A1506
OS-56-6
B1508
OS-57-8
B4897
OS-57-7
B4898
OS-57-6
B4895
OS-44-8
B1997
OS-44-7
A1998
OS-44-6
L1867
OS-59-8
B4674
OS-59-7
B4675
OS-59-6
B4672
OS-69-8
4674
OS-69-7
4675
OS-69-6
4672
OS-42-8
165
OS-42-7
186
OS-42-6
169
OS-70-8
M165
OS-70-7
L186
OS-70-6
L169
OS-5-4
859
OS-5-5C
875
OS-5-5M
856R
OS-67-4
5159
OS-67-5C
5160
OS-67-5M
5157R
OS-67-4
B5159
OS-67-5C
B5160
OS-67-5M
B5157R
OS-56-4
B1505
OS-56-5C
A1506
OS-56-5M
A51508R
OS-57-4
B4897
OS-57-5C
B4898
OS-57-5M
B4895R
OS-44-4
B1997
OS-44-5C
A1998
OS-44-5M
L1867R
OS-59-4
B4674
OS-59-5C
B4675
OS-59-5M
B4672R
OS-69-4
4674
OS-69-5C
4675
OS-69-5M
4672R
OS-42-4
165
OS-42-5C
186
OS-42-5M
169R
OS-70-4
M165
OS-70-5C
L186
OS-70-5M
L169R
41/2
37/8
513/16
F.S.
OS-48
C4814
45/8
41/8
51/2
S.H.
OS-72
C4969
45/8
41/8
55/8
F.S.
OS-74
5698
45/8
4
515/16
F.S.
OS-80
5737
45/8
4
515/16
F.S.
OS-82
C4844
43/4
41/4
55/8
S.H.
OS-46
C5168
43/4
41/4
53/4
F.S.
OS-4
8975
43/4
41/4
53/4
F.S.
OS-90
N8975
43/4
41/8
61/16
F.S.
OS-94
8940
OS-48-3
A4815
OS-48-1
B4816
OS-48-2
B1989
OS-72-3
A4970
OS-72-1
B4971
OS-72-2
M1138
OS-74-3
5699
OS-74-1
5700
OS-74-2
1143
OS-80-3
5738
OS-80-1
5735
OS-80-2
192
OS-82-3
B4845
OS-82-1
B4846
OS-82-2
L192
OS-46-3
A5169
OS-46-1
B5170
OS-46-2
B2203
OS-4-3
8976
OS-4-1
8977
OS-4-2
6121
OS-90-3
L8976
OS-90-1
M8977
OS-90-2
L6121
OS-94-3
8941
OS-94-1
8942
OS-94-2
6355
OS-48-8
B1987
OS-48-7
B1988
OS-48-6
B2199-1
OS-72-8
M1135
OS-72-7
M1137
OS-72-6
L1140
OS-74-8
1135
OS-74-7
1137
OS-74-6
1140
OS-80-8
196
OS-80-7
193
OS-80-6
195
OS-82-8
M196
OS-82-7
M193
OS-82-6
L195
OS-46-8
B2201
OS-46-7
B2202
OS-46-6
B2199
OS-4-8
6112
OS-4-7
6113
OS-4-6
6114
OS-90-8
M6112
OS-90-7
L6113
OS-90-6
L6114
OS-94-8
2364
OS-94-7
2365
OS-94-6
2362
OS-48-4
B1987
OS-48-5C
B1988
OS-48-5M
B2199-1R
OS-72-4
M1135
OS-72-5C
M1137
OS-72-5M
L1140R
OS-74-4
1135
OS-74-5C
1137
OS-74-5M
1140R
OS-80-4
196
OS-80-5C
193
OS-80-5M
195R
OS-82-4
M196
OS -82-5C
M193
OS-82-5M
L195R
OS-46-4
B2201
OS-46-5C
B2202
OS-46-5M
B2199R
OS-4-4
6112
OS-4-5C
6113
OS-4-5M
6114R
OS-90-4
M6112
OS-90-5C
L6113
OS-90-5M
L1664R
OS-94-4
2364
OS-94-5C
2365
OS-94-5M
2362R
www.gotco-usa.com

43/4
41/8
Overshot O.D.
61/16
Type
F.S.
Gotco Assembly
Part No. OS-95
XRef. No. C4829
Top Sub
Part No. OS-95-3
XRef. No. A4830
Bowl
Part No. OS-95-1
XRef. No. B4831
Standard Guide
Part No. OS-95-2
XRef. No. B2366
Spiral Grapple
Part No. OS-95-8
XRef. No. B2364
Spiral Grapple
Part No. OS-95-7
Control
XRef. No. B2365
Type A Packer
Part No. OS-95-6
XRef. No. B2362
Basket Grapple
Part No. OS-95-4
XRef. No. B2364
Basket Grapple
Part No OS-95-5C
Control
XRef. No. B2365
XRef. No. B2362R
51/2
47/8
Overshot O.D.
65/8
Type
S.H.
Gotco Assembly
Part No. OS-66
XRef. No. 8625
Top Sub
Part No. OS-66-3
XRef No. 8626
Bowl
Part No. OS-66-1
XRef No. 8617
Standard Guide
Part No. OS-66-2
XRef No. 8621
Spiral Grapple
Part No. OS-66-8
XRef. No. 8619
Spiral Grapple
Part No. OS-66-7
Control
XRef. No. 8620
Type A Packer
Part No. OS-66-6
XRef. No. 8618
Basket Grapple
Part No. OS-66-4
XRef. No. 8619
Basket Grapple
Part No. OS-66-5C
Control
XRef. No. 8620
XRef. No. 8618R
External Catch
47/8
41/4
53/4
S.H.
OS-96
C7096
47/8
41/4
61/8
F.S.
OS-62
912
47/8
41/4
63/16
F.S.
OS-97
C7093
5
41/2
57/8
S.H.
OS-58
C5171
5
43/8
61/8
S.F.S.
OS-61
7787
5
41/4
65/8
F.S.
OS-98
C4825
51/8
45/8
53/4
S.H.
OS-99
C11823
51/4
45/8
63/8
S.H.
OS-63
6655
51/4
41/2
67/8
F.S.
OS-100
C5174
53/8
43/4
61/2
S.H.
OS-102
4773
OS-96-3
A7097
OS-96-1
B7098
OS-96-2
A6391
OS-62-3
908
OS-62-1
905
OS-62-2
1186
OS-97-3
A7094
OS-97-1
B7095
OS-97-2
A2459
OS-58-3
A5172
OS-58-1
B5173
OS-58-2
B4371
OS-61-3
7789
OS-61-1
7788
OS-61-2
5946
OS-98-3
B4826
OS-98-1
B4827
OS-98-2
L1074
OS-99-3
A11824
OS-99-1
B11825
OS-99-2
A11830
OS-63-3
6656
OS-63-1
4503
OS-63-2
4504
OS-100-3
A5175
OS-100-1
B4519
OS-100-2
A4474
OS-102-3
4774
OS-102-1
9205
OS-102-2
4775
OS-96-8
B6389
OS-96-7
A6390
OS-96-6
B6387
OS-62-8
1182
OS-62-7
1187
OS-62-6
1189
OS-97-8
B2457
OS-97-7
B2458
OS-97-6
B2455
OS-58-8
B4369
OS-58-7
B4370
OS-58-6
L5950
OS-61-8
5942
OS-61-7
5944
OS-61-6
5950
OS-98-8
M1071
OS-98-7
M1072
OS-98-6
L4505
OS-99-8
B11828
OS-99-7
A11829
OS-99-6
B11826
OS-63-8
4498
OS-63-7
4499
OS-63-6
4505
OS-100-8
B4472
OS-100-7
A4473
OS-100-6
B4520
OS-102-8
9207
OS-102-7
9208
OS-102-6
9209
OS-96-4
B6389
OS-96-5C
A6390
OS-96-5M
B6387R
OS-62-4
1182
OS-62-5C
1187
OS-62-5M
1189R
OS-97-4
B2457
OS-97-5C
B2458
OS-97-5M
B2455R
OS-58-4
B4369
OS-58-5C
B4370
OS-58-5M
L5950R
OS-61-4
5942
OS-61-5C
5944
OS-61-5M
5950R
OS-98-4
M1071
OS-98-5C
M1072
OS-98-5M
M4505RS
OS-99-4
B11828
OS-99-5C
A11829
OS-99-5M
B11826R
OS-63-4
4498
OS-63-5C
4499
OS-63-5M
4505R
OS-100-4
B4472
OS-100-5C
A4473
OS-100-5M
B4520R
OS-102-4
9207
OS-102-5C
9208
OS-102-5M
9209R
51/2
43/4
65/8
S.H.
OS-103
C5178
51/2
43/4
71/8
F.S.
OS-104
C5176
59/16
413/16
615/16
F..S.
OS-105
8943
59/16
413/16
71/4
F.S.
OS-106
C3810
55/8
5
63/4
X.S.H.
OS-108
9038
53/4
51/8
67/8
S.H.
OS-68
8978
53/4
5
67/8
S.H.
OS-109
C5193
53/4
5
73/8
F.S.
OS-110
6150
6
5
73/8
F.S.
OS-71
C4689
6
53/8
71/8
S.H.
OS-111
C5196
OS-103-3
B4826
OS-103-1
B5179
OS-103-2
A5184
OS-104-3
A5177
OS-104-1
B2791
OS-104-2
A761
OS-105-3
8944
OS-105-1
8945
OS-105-2
8946
OS-106-3
A3811
OS-106-1
B3812
OS-106-2
A3813
OS-108-3
9039
OS-108-1
9040
OS-108-2
9037
OS-68-3
8979
OS-68-1
8980
OS-68-2
6701
OS-109-3
A-5194
OS-109-1
B5195
OS-109-2
A-3483
OS-110-3
6151
OS-110-1
6152
OS-110-2
120
OS-71-3
A4690
OS-71-1
B3522
OS-71-2
L120
OS-111-3
A5197
OS-111-1
B5198
OS-111-2
A5203
OS-103-8
B5182
OS-103-7
A5183
OS-103-6
B5180
OS-104-8
B759
OS-104-7
B760
OS-104-6
A746
OS-105-8
103
OS-105-7
129
OS-105-6
8947
OS-106-8
M103
OS-106-7
M129
OS-106-6
L113
OS-108-8
M9035
OS-108-7
M9036
OS-108-6
L9033
OS-68-8
6699
OS-68-7
6700
OS-68-6
6697
OS-109-8
B3481
OS-109-7
A3482
OS-109-6
B3479
OS-110-8
104
OS-110-7
130
OS-110-6
110
OS-71-8
M104
OS-71-7
L130
OS-71-6
L110
OS-111-8
B5201
OS-111-7
A5202
OS-111-6
B5199
OS-103-4
B5182
OS-103-5C
A5183
OS-103-5M
B5180R
OS-104-4
B759
OS-104-5C
B760
OS-104-5M
A756R
OS-105-4
103
OS-105-5C
129
OS-105-5M
8947R
OS-106-4
M103
OS -106-5C
M129
OS-106-5M
L113R
OS-108-4
9035
OS-108-5C
9036
OS-108-5M
9033R
OS-68-4
6699
OS-68-5C
6700
OS-68-5M
6697R
OS-109-4
B3481
OS-109-5C
A3482
OS-109-5M
B3479R
OS-110-4
104
OS-110-5C
130
OS-110-5M
110R
OS-71-4
M104
OS-71-5C
L130
OS-71-5M
L110R
OS-111-4
B5201
OS-111-5C
A5202
OS-111-5M
B5199R
www.gotco-usa.com

6
51/4
Overshot O.D.
71/2
Type
F.S.
Gotco Assembly
Part No. OS-114
XRef. No. 9996
Top Sub
Part No. OS-114-3
XRef. No. 9997
Bowl
Part No. OS-114-1
XRef. No. 8945
Standard Guide
Part No. OS-114-2
XRef. No. 218
Spiral Grapple
Part No. OS-114-8
XRef. No. 220
Spiral Grapple
Part No. OS-114-7
Control
XRef. No. 219
Type A Packer
Part No. OS-114-6
XRef. No. 223
Basket Grapple
Part No. OS-114-4
XRef. No. 220
Basket Grapple
Part No OS-114-5C
Control
XRef. No. 219
XRef. No. 223R
61/4
59/16
Overshot O.D.
75/8
Type
S.F.S.
Gotco Assembly
Part No. OS-120
XRef. No. 1873
Top Sub
Part No. OS-120-3
XRef. No. 118
Bowl
Part No. OS-120-1
XRef. No. 1875
Standard Guide
Part No. OS-120-2
XRef. No. 5525
Spiral Grapple
Part No. OS-120-8
XRef. No. 1644
Spiral Grapple
Part No. OS-120-7
Control
XRef. No. 1645
Type A Packer
Part No. OS-120-6
XRef. No. 1642
Basket Grapple
Part No. OS-120-4
XRef. No. 1644
Basket Grapple
Part No. OS-120-5C
Control
XRef. No. 1645
XRef. No. 1642R
6
51/4
75/8
F.S.
OS-115
247
6
51/4
75/8
F.S.
OS-116
C3364
6
51/4
75/8
F.S.
OS-75
7572
61/8
51/2
71/4
S.H.
OS-117
C5206
61/8
53/8
73/4
F.S.
OS-77
C5204
61/4
55/8
73/8
S.H.
OS-118
12567
61/4
55/8
73/8
S.H.
OS-73
9692
61/4
55/8
73/8
S.H.
OS-119
12565
61/4
51/2
73/8
S.H.
OS-731
C4691
61/4
59/16
75/8
S.F.S.
OS-6
8741
OS-115-3
248
OS-115-1
249
OS-115-2
218
OS-116-3
A3365
OS-116-1
B3366
OS-116-2
L218
OS-75-3
7573
OS-75-1
7574
OS-75-2
218
OS-117-3
A5207
OS-117-1
B5208
OS-117-2
A5213
OS-77-3
A5205
OS-77-1
B4218
OS-77-2
A2065
OS-118-3
7573
OS-118-1
12568
OS-118-2
9691
OS-73-3
9693
OS-73-1
9694
OS-73-2
9691
OS-119-3
118
OS-119-1
12566
OS-119-2
9691
OS-731-3
A4692
OS-731-1
B4693
OS-731-2
A4696
OS-6-3
8742
OS-6-1
1641
OS-6-2
5525
OS-115-8
220
OS-115-7
219
OS-115-6
223
OS-116-8
M220
OS-116-7
L219
OS-116-6
L223
OS-75-8
220
OS-75-7
219
OS-75-6
223
OS-117-8
B5211
OS-117-7
A5212
OS-117-6
B5209
OS-77-8
B2063
OS-77-7
B2064
OS-77-6
L1642
OS-118-8
9687
OS-118-7
9688
OS-118-6
9689
OS-73-8
9687
OS-73-7
9688
OS-73-6
9689
OS-119-8
9687
OS-119-7
9688
OS-119-6
9689
OS-731-8
B4694
OS-731-7
B4695
OS-731-6
L1642
OS-6-8
1644
OS-6-7
1645
OS-6-6
1642
OS-115-4
220
OS-115-5C
219
OS-115-5M
223R
OS-116-4
M220
OS-116-5C
L219
OS-116-5M
L223R
OS-75-4
220
OS-75-5C
219
OS-75-5M
223R
OS-117-4
B5211
OS-117-5C
A5212
OS-117-5M
B5209R
OS-77-4
B2063
OS-77-5C
B2064
OS-77-5M
L1642R
OS-118-4
9687
OS-118-5C
9688
OS-118-5M
9689R
OS-73-4
9687
OS-73-5C
9688
OS-73-5M
9689R
OS-119-4
9687
OS-119-5C
9688
OS-119-5M
9689R
OS-731-4
B4694
OS-731-5C
B4695
OS-731-5M
L1642R
OS-6-4
1644
OS-6-5C
1645
OS-6-5M
1642R
61/4
59/16
75/8
S.F.S.
OS-121
19090
61/4
59/16
75/8
S.F.S.
OS-6
N8741
61/4
59/16
77/8
F.S.
OS-122
7791
61/4
59/16
77/8
F.S.
OS-123
9678
61/4
51/2
77/8
F.S.
OS-78
C2108
61/4
59/16
77/8
F.S.
OS-124
D7791
63/8
53/4
71/2
S.H.
OS-125
9009
63/8
55/8
73/4
S.F.S.
OS-775
9163
61/2
53/4
75/8
S.H.
OS-761
C5344
61/2
57/8
75/8
S.H.
OS-76
M9860
OS-121-3
19091
OS-121-1
19092
OS-121-2
5525
OS-6-3
L8742
OS-6-1
M1641
OS-6-2
L5525
OS-122-3
7793
OS-122-1
1657
OS-122-2
1493
OS-123-3
7922
OS-123-1
9749
OS-123-2
1493
OS-78-3
B2106
OS-78-1
B2109
OS-78-2
A2075
OS-124-3
L7793
OS-124-1
M1657
OS-124-2
L1493
OS-125-3
9010
OS-125-1
9011
OS-125-2
9007
OS-775-3
9165
OS-775-1
9164
OS-775-2
5506
OS-761-3
A5345
OS-761-1
B5346
OS-761-2
A5351
OS-76-3
L9861
OS-76-1
M9862
OS-76-2
L9867
OS-121-8
1644
OS-121-7
1645
OS-121-6
1642
OS-6-8
M1644
OS-6-7
L1645
OS-6-6
L1642
OS-122-8
1659
OS-122-7
1660
OS-122-6
1680
OS-123-8
1659
OS-123-7
1660
OS-123-6
1680
OS-78-8
B2073
OS-78-7
A2074
OS-78-6
L1680
OS-124-8
M1659
OS-124-7
L1660
OS-124-6
L1680
OS-125-8
9003
OS-125-7
9004
OS-125-6
9005
OS-775-8
5503
OS-775-7
5504
OS-775-6
5508
OS-761-8
B5349
OS-761-7
B5350
OS-761-6
B5347
OS-76-8
M9863
OS-76-7
L9864
OS-76-6
M9865
OS-121-4
1644
OS-121-5C
1645
OS-121-5M
1642R
OS-6-4
M1644
OS-6-5C
L1645
OS-6-5M
L1642R
OS-122-4
1659
OS-122-5C
1660
OS-122-5M
1680R
OS-123-4
1659
OS-123-5C
1660
OS-123-5M
1680R
OS-78-4
B2073
OS-78-5C
A2074
OS-78-5M
L1680R
OS-124-4
M1659
OS-124-5C
L1660
OS-124-5M
1680R
OS-125-4
9003
OS-125-5C
9004
OS-125-5M
9005R
OS-775-4
5503
OS-775-5C
5504
OS-775-5M
5508R
OS-761-4
B5349
OS-761-5C
B5350
OS-761-5M
B5347R
OS-76-4
M9863
OS-76-5C
L9864
OS-76-5M
L9865R
www.gotco-usa.com

61/2
53/4
Overshot O.D.
81/8
Type
F.S.
Gotco Assembly
Part No. OS-85
XRef. No. C5342
Top Sub
Part No. OS-85-3
XRef. No. A5343
Bowl
Part No. OS-85-1
XRef. No. B3711
Standard Guide
Part No. OS-85-2
XRef. No. A2376
Spiral Grapple
Part No. OS-85-8
XRef. No. B2374
Spiral Grapple
Part No. OS-85-7
Control
XRef. No. B2375
Type A Packer
Part No. OS-85-6
XRef. No. B2372
Basket Grapple
Part No. OS-85-4
XRef. No. B2374
Basket Grapple
Part No. OS-85-5C
Control
XRef. No. B2375
Mill Control Packer
Part No. OS-85-5M
XRef. No. M6635R
7
63/8
Overshot O.D.
81/8
Type
S.H.
Gotco Assembly
Part No. OS-132
XRef. No. 9815
Top Sub
Part No. OS-132-3
XRef. No. 9816
Bowl
Part No. OS-132-1
XRef. No. 9817
Standard Guide
Part No. OS-132-2
XRef. No. 9226
Spiral Grapple
Part No. OS-132-8
XRef. No. 9222
Spiral Grapple
Part No. OS-132-7
Control
XRef. No. 9223
Type A Packer
Part No. OS-132-6
XRef. No. 9224
Basket Grapple
Part No. OS-132-4
XRef. No. 9222
Basket Grapple
Part No
OS-132-5C
Control
XRef. No. 9223
Mill Control Packer
Part No. OS-132-5M
XRef. No. 9224R
External Catch
65/8
6
73/4
S.H.
OS-126
4785
65/8
6
73/4
S.H.
OS-127
N4785
65/8
57/8
81/8
S.F.S.
OS-128
9339
65/8
57/8
81/4
F.S.
OS-129
C3032
63/4
61/8
77/8
S.H.
OS-130
16500
63/4
61/8
77/8
S.H.
OS-79
C5222
63/4
6
83/8
F.S.
OS-83
275
63/4
6
83/8
F.S.
OS-131
C3833
67/8
61/4
8
S.H.
OS-81
8995
OS-126-3
9133
OS-126-1
9134
OS-126-2
9139
OS-127-3
L9133
OS-127-1
M9134
OS-127-2
L9139
OS-128-3
9338
OS-128-1
9337
OS-128-2
4174
OS-129-3
A3033
OS-129-1
B3034
OS-129-2
A1818
OS-130-3
16501
OS-130-1
16502
OS-130-2
16503
OS-79-3
A5223
OS-79-1
B5224
OS-79-2
A5229
OS-83-3
276
OS-83-1
277
OS-83-2
205
OS-131-3
A3834
OS-131-1
B3816
OS-131-2
L205
OS-81-3
8996
OS-81-1
8997
OS-81-2
8989
OS-126-8
9137
OS-126-7
9138
OS-126-6
9136
OS-127-8
M9137
OS-127-7
L9138
OS-127-6
L9136
OS-128-8
84
OS-128-7
89
OS-128-6
1634
OS-129-8
N84
OS-129-7
M89
OS-129-6
A1814
OS-130-8
B5227
OS-130-7
B5228
OS-130-6
B5225
OS-79-8
B5227
OS-79-7
A5228
OS-79-6
B5225
OS-83-8
209
OS-83-7
208
OS-83-6
207
OS-131-8
M209
OS-131-7
L208
OS-131-6
L207
OS-81-8
8987
OS-81-7
8988
OS-81-6
8985
OS-126-4
9137
OS-126-5C
9138
OS-126-5M
9136R
OS-127-4
M9137
OS-127-5C
L9138
OS-127-5M
L9136R
OS-128-4
84
OS-128-5C
89
OS-128-5M
1634R
OS-129-4
N84
OS-129-5C
M89
OS-129-5M
A1814R
OS-130-4
B5227
OS-130-5C
B5228
OS-130-5M
B5225R
OS-79-4
B5227
OS-79-5C
A5228
OS-79-5M
B5225R
OS-83-4
209
OS-83-5C
208
OS-83-5M
207R
OS-131-4
M209
OS-131-5C
L208
OS-131-5M
L207R
OS-81-4
8987
OS-81-5C
8988
OS-81-5M
8985R
7
63/8
81/8
S.H.
OS-8
9217
7
61/4
81/8
S.H.
OS-133
C3263
7
63/8
83/8
S.H.
OS-84
17208
7
61/4
85/8
F.S.
OS-134
7800
7
61/4
85/8
F.S.
OS-86
C4817
71/8
61/2
81/4
S.H.
OS-135
9750
71/4
65/8
83/8
S.H.
OS-136
C5354
71/4
61/2
87/8
F.S.
OS-137
7805
71/4
61/2
87/8
F.S.
OS-88
C5352
OS-8-3
9218
OS-8-1
9219
OS-8-2
9226
OS-133-3
A3033
OS-133-1
B3264
OS-133-2
A3269
OS-84-3
276
OS-84-1
17209
OS-84-2
9226
OS-134-3
7802
OS-134-1
7801
OS-134-2
121
OS-86-3
B4818
OS-86-1
B3819
OS-86-2
M121
OS-135-3
9544
OS-135-1
9571
OS-135-2
4792
OS-136-3
A5355
OS-136-1
B5356
OS-136-2
A5361
OS-137-3
7807
OS-137-1
7806
OS-137-2
1029
OS-88-3
A5353
OS-88-1
M1026
OS-88-2
M1029
OS-8-8
9222
OS-8-7
9223
OS-8-6
L9224
OS-133-8
B3267
OS-133-7
B3268
OS-133-6
L6310
OS-84-8
9222
OS-84-7
9223
OS-84-6
9224
OS-134-8
105
OS-134-7
131
OS-134-6
111
OS-86-8
N105
OS-86-7
M131
OS-86-6
L111
OS-135-8
9229
OS-135-7
9230
OS-135-6
9231
OS-136-8
B5359
OS-136-7
B5360
OS-136-6
B5357
OS-137-8
1027
OS-137-7
1031
OS-137-6
1025
OS-88-8
M1027
OS-88-7
M1031
OS-88-6
L1025
OS-8-4
9222
OS -8-5C
9223
OS-8-5M
L9224R
OS-133-4
B3267
OS-133-5C
B3268
OS-133-5M
L6310R
OS-84-4
9222
OS-84-5C
9223
OS-84-5M
9224R
OS-134-4
105
OS-134-5C
131
OS-134-5M
111R
OS-86-4
N105
OS-86-5C
M131
OS-86-5M
L111R
OS-135-4
9229
OS-135-5C
9230
OS-135-5M
9231R
OS-136-4
B5359
OS-136-5C
B5360
OS-136-5M
B5357R
OS-137-4
1027
OS-137-5C
1031
OS-137-5M
1025R
OS-88-4
M1027
OS-88-5C
M1031
OS-88-5M
L1025R
www.gotco-usa.com

73/8
63/4
Overshot O.D.
81/2
Type
S.H.
Gotco Assembly
Part No. OS-138
XRef. No. 4793
Top Sub
Part No. OS-138-3
XRef. No. 4794
Bowl
Part No. OS-138-1
XRef. No. 9233
Standard Guide
Part No. OS-138-2
XRef. No. 4795
Spiral Grapple
Part No. OS-138-8
XRef. No. 9235
Spiral Grapple
Part No. OS-138-7
Control
XRef. No. 9236
Type A Packer
Part No. OS-138-6
XRef. No. 9237
Basket Grapple
Part No. OS-138-4
XRef. No. 9235
Basket Grapple
Part No. OS-138-5C
Control
XRef. No. 9236
Mill Control Packer
Part No. OS-138-5M
XRef. No. 9237R
73/4
71/8
Overshot O.D.
87/8
Type
S.H.
Gotco Assembly
Part No. OS-89
XRef. No. 5257
Top Sub
Part No. OS-89-3
XRef. No. 5258
Bowl
Part No. OS-89-1
XRef. No. 5259
Standard Guide
Part No. OS-89-2
XRef. No. 5264
Spiral Grapple
Part No. OS-89-8
XRef. No. 5262
Spiral Grapple
Part No. OS-89-7
Control
XRef. No. 5263
Type A Packer
Part No. OS-89-6
XRef. No. 5260
Basket Grapple
Part No. OS-89-4
XRef. No. 5262
Basket Grapple
Part No
OS-89-5C
Control
XRef. No. 5263
Mill Control Packer
Part No. OS-89-5M
XRef. No. 5260R
73/8
65/8
81/2
S.H.
OS-139
C5233
73/8
65/8
9
F.S.
OS-140
C5230
71/2
67/8
85/8
S.H.
OS-141
12692
71/2
67/8
85/8
S.H.
OS-142
C7101
71/2
63/4
83/4
S.F.S.
OS-143
9290
71/2
63/4
91/8
F.S.
OS-91
C7099
75/8
7
83/4
S.H.
OS-87
4796
75/8
67/8
91/4
F.S.
OS-144
C5241
73/4
71/8
87/8
S.H.
OS-145
9850
OS-139-3
A5234
OS-139-1
B5235
OS-139-2
A5240
OS-140-3
A5231
OS-140-1
B5232
OS-140-2
A4158
OS-141-3
12693
OS-141-1
12694
OS-141-2
12699
OS-142-3
A7102
OS-142-1
B7103
OS-142-2
A7108
OS-143-3
9296
OS-143-1
9291
OS-143-2
9295
OS-91-3
A7100
OS-91-1
B4516
OS-91-2
A3456
OS-87-3
4797
OS-87-1
9239
OS-87-2
4798
OS-144-3
A5242
OS-144-1
B5243
OS-144-2
A5248
OS-145-3
9851
OS-145-1
9852
OS-145-2
9857
OS-139-8
B5238
OS-139-7
B5239
OS-139-6
B5236
OS-140-8
C4156
OS-140-7
B4157
OS-140-6
B4154
OS-141-8
12697
OS-141-7
12698
OS-141-6
12695
OS-142-8
B7106
OS-142-7
A7107
OS-142-6
B7104
OS-143-8
9292
OS-143-7
9293
OS-143-6
9298
OS-91-8
B3454
OS-91-7
B3455
OS-91-6
L98
OS-87-8
9241
OS-87-7
9242
OS-87-6
9243
OS-144-8
B5246
OS-144-7
B5247
OS-144-6
B5244
OS-145-8
9853
OS-145-7
9854
OS-145-6
9855
OS-139-4
B5238
OS-139-5C
B5239
OS-139-5M
B5236R
OS-140-4
C4156
OS-140-5C
B4157
OS-140-5M
B4154R
OS-141-4
12697
OS-141-5C
12698
OS-141-5M
12695R
OS-142-4
B7106
OS-142-5C
A7107
OS-142-5M
B7104R
OS-143-4
9292
OS-143-5C
9293
OS-143-5M
9298R
OS-91-4
B3454
OS-91-5C
B3455
OS-91-5M
M98RS
OS-87-4
9241
OS-87-5C
9242
OS-87-5M
9243R
OS-144-4
B5246
OS-144-5C
B5247
OS-144-5M
B5244R
OS-145-4
9853
OS-145-5C
9854
OS-145-5M
9855R
73/4
7
93/8
F.S.
OS-93
1665
73/4
7
93/8
F.S.
OS-146
C1500
77/8
71/4
9
S.H.
OS-147
4816
8
71/4
91/8
S.H.
OS-92
C5265
8
71/4
95/8
F.S.
OS-9
264
8
71/4
95/8
F.S.
OS-148
C4179
83/8
73/4
91/2
S.H.
OS-149
4834
83/8
75/8
101/16
F.S.
OS-150
C1230
81/2
77/8
95/8
S.H.
OS-151
C5284
OS-93-3
1666
OS-93-1
1283
OS-93-2
88
OS-146-3
B1502
OS-146-1
B1501
OS-146-2
M88
OS-147-3
4835
OS-147-1
9245
OS-147-2
4836
OS-92-3
A5266
OS-92-1
B5267
OS-92-2
A5272
OS-9-3
265
OS-9-1
266
OS-9-2
240
OS-148-3
B4180
OS-148-1
B2716
OS-148-2
M240
OS-149-3
9063
OS-149-1
9062
OS-149-2
9059
OS-150-3
B1235
OS-150-1
B1231
OS-150-2
B1236
OS-151-3
A5285
OS-151-1
B5286
OS-151-2
A5291
OS-93-8
85
OS-93-7
100
OS-93-6
98
OS-146-8
N85
OS-146-7
M100
OS-146-6
L98
OS-147-8
9248
OS-147-7
9249
OS-147-6
9250
OS-92-8
B5270
OS-92-7
B5271
OS-92-6
B5268
OS-9-8
238
OS-9-7
239
OS-9-6
235
OS-148-8
M238
OS-148-7
M239
OS-148-6
M235
OS-149-8
9057
OS-149-7
9058
OS-149-6
9055
OS-150-8
C1232
OS-150-7
B1233
OS-150-6
L1060
OS-151-8
B5289
OS-151-7
A5290
OS-151-6
B5287
OS-93-4
85
OS -93-5C
100
OS-93-5M
98R
OS-146-4
N85
OS-146-5C
M100
OS-146-5M
L98R
OS-147-4
9248
OS-147-5C
9249
OS-147-5M
9250R
OS-92-4
B5270
OS-92-5C
B5271
OS-92-5M
B5268R
OS-9-4
238
OS-9-5C
239
OS-9-5M
235R
OS-148-4
M238
OS-148-5C
M239
OS-148-5M
L235R
OS-149-4
9057
OS-149-5C
9058
OS-149-5M
9055R
OS-150-4
C1232
OS-150-5C
B1233
OS-150-5M
L1060R
OS-151-4
B5289
OS-151-5C
B5290
OS-151-5M
B5287R
10
www.gotco-usa.com

81/2
73/4
Overshot O.D.
101/8
Type
F.S.
Gotco Assembly
Part No. OS-101
XRef. No. 8960
Top Sub
Part No. OS-101-3
XRef. No. 8961
Bowl
Part No. OS-101-1
XRef. No. 8962
Standard Guide
Part No. OS-101-2
XRef. No. 8959
Spiral Grapple
Part No. OS-101-8
XRef. No. 8957
Spiral Grapple
Part No. OS-101-7
Control
XRef. No. 8958
Type A Packer
Part No. OS-101-6
XRef. No. 8956
Basket Grapple
Part No. OS-101-4
XRef. No. 8957
Basket Grapple
Part No. OS-101-5C
Control
XRef. No. 8958
Mill Control Packer
Part No. OS-101-5M
XRef. No. 8956R
95/8
87/8
Overshot O.D.
111/4
Type
F.S.
Gotco Assembly
Part No. OS-112
XRef. No. C12822
Top Sub
Part No. OS-112-3
XRef. No. A12823
Bowl
Part No. OS-112-1
XRef. No. B12824
Standard Guide
Part No. OS-112-2
XRef. No. A12829
Spiral Grapple
Part No. OS-112-8
XRef. No. B12827
Spiral Grapple
Part No. OS-112-7
Control
XRef. No. B12828
Type A Packer
Part No. OS-112-6
XRef. No. B12825
Basket Grapple
Part No. OS-112-4
XRef. No. B12827
Basket Grapple
Part No
OS-112-5C
Control
XRef. No. B12828
Mill Control Packer
Part No. OS-112-5M
XRef. No. B12825R
External Catch
81/2
73/4
101/8
F.S.
OS-152
C5281
85/8
8
93/4
X.S.H.
OS-153
4837
85/8
77/8
101/4
S.H.
OS-154
C5297
85/8
75/8
11
F.S.
OS-155
C5292
83/4
8
101/2
F.S.
OS-107
8963
87/8
81/8
101/2
F.S.
OS-156
C5305
9
81/4
105/8
F.S.
OS-10
5321
9
8
113/8
F.S.
OS-157
C5313
91/2
83/4
113/4
F.S.
OS-158
15250
OS-152-3
A5282
OS-152-1
B5283
OS-152-2
B4432
OS-153-3
4838
OS-153-1
9098
OS-153-2
4839
OS-154-3
A5298
OS-154-1
B5299
OS-154-2
A5304
OS-155-3
A5293
OS-155-1
B5294
OS-155-2
A5296
OS-107-3
8964
OS-107-1
8965
OS-107-2
8968
OS-156-3
A5306
OS-156-1
B5307
OS-156-2
A5312
OS-10-3
5322
OS-10-1
5323
OS-10-2
5328
OS-157-3
A5314
OS-157-1
B5315
OS-157-2
A5320
OS-158-3
15251
OS-158-1
15252
OS-158-2
15257
OS-152-8
B4430
OS-152-7
A4431
OS-152-6
L1060
OS-153-8
9101
OS-153-7
9102
OS-153-6
9103
OS-154-8
B5302
OS-154-7
B5303
OS-154-6
B5300
OS-155-8
B1962
OS-155-7
B1963
OS-155-6
A1966
OS-107-8
8966
OS-107-7
8967
OS-107-6
1966
OS-156-8
B5310
OS-156-7
B5311
OS-156-6
B5308
OS-10-8
5326
OS-10-7
5327
OS-10-6
5324
OS-157-8
B5318
OS-157-7
B5319
OS-157-6
B5316
OS-158-8
15253
OS-158-7
15254
OS-158-6
15255
OS-152-4
B4430
OS-152-5C
A4431
OS-152-5M
L1060R
OS-153-4
9101
OS-153-5C
9102
OS-153-5M
9103R
OS-154-4
B5302
OS-154-5C
B5303
OS-154-5M
B5300R
OS-155-4
B1962
OS-155-5C
B1963
OS-155-5M
A1966R
OS-107-4
8966
OS-107-5C
8967
OS-107-5M
1966R
OS-156-4
B5310
OS-156-5C
B5311
OS-156-5M
B5308R
OS-10-4
5326
OS-10-5C
5327
OS-10-5M
5324R
OS-157-4
B5318
OS-157-5C
B5319
OS-157-5M
B5316R
OS-158-4
15253
OS-158-5C
15254
OS-158-5M
15255R
93/4
9
113/8
F.S.
OS-113
26255
10
91/4
117/8
F.S.
OS-159
8969
101/8
93/8
113/4
F.S.
OS-11
5329
101/8
91/8
121/2
X.F.S.
OS-160
C1880
111/4
101/2
123/4
F.S.
OS-12
15800
12
111/4
133/4
14
131/4
16
143/4
14
163/4
163/4
16
203/4
OS-163
33006
OS-162
68028
OS-164
64553
OS-165
31653
OS-113-3
26256
OS-113-1
26257
OS-113-2
26261
OS-159-3
8970
OS-159-1
8971
OS-159-2
8974
OS-11-3
5330
OS-11-1
5331
OS-11-2
5336
OS-160-3
B1885
OS-160-1
B1881
OS-160-2
B1973
OS-12-3
15801
OS-12-1
15802
OS-12-2
15806
OS-163-3
33007
OS-163-1
33008
OS-163-2
33012
OS-162-3
68029
OS-162-1
68030
OS-162-2
68035
OS-164-3
64554
OS-164-1
64555
OS-164-2
64560
OS-165-3
31654
OS-165-1
31655
OS-165-2
31660
OS-113-8
26258
OS-113-7
26259
OS-113-6
26260
OS-159-8
8972
OS-159-7
8973
OS-159-6
1969
OS-11-8
5334
OS-11-7
5335
OS-11-6
5332
OS-160-8
B1971
OS-160-7
B1972
OS-160-6
A1969
OS-12-8
15803
OS-12-7
15804
OS-12-6
15805
OS-163-8
33009
OS-163-7
33010
OS-163-6
33011
OS-162-8
68033
OS-162-7
68034
OS-162-6
68031
OS-164-8
64558
OS-164-7
64559
OS-164-6
64556
OS-165-8
31658
OS-165-7
31659
OS-165-6
31656
OS-113-4
26258
OS -113-5C
26259
OS-113-5M
26260R
OS-159-4
8972
OS-159-5C
8973
OS-159-5M
1969R
OS-11-4
5334
OS-11-5C
5335
OS-11-5M
5332R
OS-160-4
B1971
OS-160-5C
B1972
OS-160-5M
A1969R
OS-12-4
15803
OS-12-5C
15804
OS-12-5M
15805R
OS-163-4
33009
OS-163-5C
33010
OS-163-5M
33011R
OS-162-4
68033
OS-162-5C
68034
OS-162-5M
68031R
OS-164-4
64558
OS-164-5C
64559
OS-164-5M
64556R
OS-165-4
31658
OS-165-5C
31659
OS-165-5M
31656R
www.gotco-usa.com
11
External Catch Series 150 Overshot Accessories
Series 150
Overshot Accessories
Nitralloy Grapples Wall Hook Guides Oversized Guides
Extension Subs Overshot Milling Shoes Inner & Outer Seals
Overshot Mill Extensions Lock Rings Spacer Rings
Optional Components
and Accessories
Nitralloy Grapples Nitralloy grapples are made from a special alloy that is ion nitrided to provide much greater hardness and a
superior gripping capability.
Hollow
Mill
Container
Mill
Insert
Wall Hook Guide Weights

Guide O.D. (in.)
Guide Length
Over
To
30"
36"
42"
5
81
94
110
51/2
6
87
102
117
51/2
6
93
110
126
61/2
7
100
117
134
61/2
7
108
126
144
71/2
8
115
135
155
71/2
8
123
145
166
81/2
9
132
155
177
81/2
9
185
191
91/2
10
190
204
91/2
10
225
244
101/2
11
275
285
101/2
11
1 2
11 /
12
1
Standard
Guide
Wall Hook Guide
12 /2
13
(shown with standard lipped guide)
111/2
12
121/2
13
1 2
131/2
14
1 2
141/2
15
13 /
14
14 /
15
Hollow Mill Container

with Hollow Mill Insert
Wall Hook Guide If the

fish is positioned in a washed out
section of the hole, it may be
impossible to engage the top of
the fish using a conventional overshot guide. A wall hook guide can
be used to capture the neck of the
15 /2
16
1 2
16 /
17
171/2
151/2
16
161/2
17
171/2
18
285
300
299
312
327
343
360
377
391
404
419
433
448
462
479
496
How to Order
Gotco Mill Containers
Oversized Guide
12

Overshot type and assembly number
Fish diameter to be dressed (specify size of carbide)
Mills can be furnished without tungsten carbide upon request.
How to Order
Gotco Wall Hook Guides
How to Order
Gotco Oversize Guides

O.D. of guide lip.
Part number of Overshot.
O.D. of Overshot.

O.D. of guide lip.
Part number of Overshot.
O.D. of Overshot.
www.gotco-usa.com
48"
188
198
213
228
273
318
333
348
366
383
402
421
436
451
467
483
500
516
535
564
Series 150 Overshot Accessories
fish, centralize it, then properly

guide the fish into the bowl.
Oversized Guide When
the hole size is considerably larger than the diameter of the fish,
there may be sufficient room for
the overshot to pass alongside of
the fish without engaging it. In
this case, an oversized guide can
be used to assure fish engagement and to properly guide the
fish into the overshot.
Extension Subs When the
upper portion of the fish is damaged or otherwise cannot be
engaged, an extension sub can be
used to allow the overshot to be
lowered further over the fish to
assure proper engagement and
pack-off. The extension sub is
assembled between the top sub
and the bowl, and is available in
lengths from 24 to 60 inches.
Overshot Milling Shoe
Used in place of the standard
guide, the overshot milling shoe
allows the top of the fish to be
milled clean. This removes excessive burring or jagged edges and
assures proper grapple engagement and pack-off.
Overshot Mill Extension
The mill extension is used with
the standard guide. It is assembled between the bowl and guide
and, like the overshot milling
shoe, allows the top of the fish to
be milled clean.
Hollow Mill Container and
Mill Insert The Hollow Mill
Container provides a means to
dress the fish and recover the fish
with a standard Overshot in one
trip. The Hollow Mill container is
located between the Overshot
Bowl and Standard Guide. A Mill
Insert, dressed with Tungsten
Carbide to the desired milling
diameter, is placed inside the lowermost section of the Hollow Mill
Container and is secured in place
by the Standard Guide. This will
allow for the fish to be dressed
prior to entering the Overshot for
recovery.
Lock Rings & Spacer Rings

A lock ring assembly can be used
to prevent unscrewing of the top
sub from the bowl during left-hand
rotation of the fishing string. Lock
rings come in pairs and are assem-
External Catch
bled between the top sub and the

bowl. When selecting a spiral grapple and type A packer, the spacer
ring must be used with the lock
ring assembly to keep the type A
packer in the correct position.
Control Packers
Type-R Replaceable Inner Seals
Fish Size
17/8
Gotco Part No. G10803

Fish Size
2 /4

Fish Size
35/8

Fish Size
4 /2

Fish Size
5 /8

Fish Size
6 /4

Fish Size
71/8

Fish Size

Fish Size
87/8
21/8
21/4
23/8
21/2
25/8
G10804
G10805
G10806
G10807
G10808
G10809
2 /8
3 /8
3 /4
3 /8
31/2
G10811
G10812
G10813
G10814
G10815
G10816
33/4
37/8
41/8
41/4
43/8
G10819
G10820
G10821
G10822
G10823
G10824
4 /4
4 /8
5 /8
51/4
G10826
G10827
G10828
G10829
G10830
G10831
5 /8
5 /4
5 /8
61/8
G10833
G10834
G10835
G10836
G10837
G10838
5 /2
4 /8
6 /8
6 /2
6 /8
6 /4
6 /8
G10840
G10841
G10842
G10843
G10844
G10845
71/4
73/8
71/2
75/8
73/4
77/8
G10847
G10848
G10849
G10850
G10851
G10852
8 /8
8 /4
8 /8
8 /2
8 /8
83/4
G10854
G10855
G10856
G10857
G10858
G10859
91/8
91/4
G10861
G10862
G10863
Overshot
Milling Shoe
Overshot
Milling Extension
How to Order Gotco Inner Seals

Control Packer Number.
Fish Size.
Inner Seal Number.
Recommended Spares:
3 Inner Seals
Gotco Adhesive
Gotco Adhesive Compound:
Resyn #41241-1
Catalyst #41241-2
Overshot
Extension Sub
Inner Seal
www.gotco-usa.com
13
External Catch
Series 70 Short Catch Overshots
Series 70
Short-Catch Overshot
The Gotco Series 70 Short-Catch Overshot is an external catch
fishing tool designed to retrieve tubular members from the well
bore when the top of the fish is too short to be engaged with a
standard overshot. Designed with the grapple positioned at the
extreme lower end of the tool, this overshot can engage a fish
with a very short top end.
Construction
Assembly and Operation
The assembly consists of a

top sub, bowl, basket grapple, and
basket grapple control. These
components function in the same
manner as those in the standard
Gotco Series 150 Releasing and
Circulating Overshot.
Screw basket grapple into

bowl so that control slot in grapple aligns with slot in bowl. Slide
grapple control into bowl until
tang engages both the bowl slot
and grapple slot. Make up top sub
to bowl.
Engagement & Retrieval of
Fish Attach the overshot to the
bottom of the fishing string and
run into hole. When the overshot
nears the top of the fish, gradually
lower the fishing string while
slowly maintaining the right-hand
rotation. When the fish is engaged,
release right-hand torque and pull.
Release of Fish Bump
down on the overshot. Then rotate
the fishing string to the right
while picking up slowly.
How to Order
Gotco Series 70
Short-Catch Overshots
Short-Catch Overshot
14

Assembly name.
Assembly part number.
Top connection required.
OD of fish to be retrieved.
OD of tool, if nonstandard.
Series 70 Short-Catch Overshot

Maximum Catch
15/8
21/2
5
Standard OD
2 /16
35/8
7/8 SR
Standard Connection
21/2 Eue
Type
SH
SH
Comp. Assembly Part No.
SC-1
SC-2
XRef. No. 38506
17615
Replacement Parts
Top Sub
Part No.
SC-1-3
SC-2-3
XRef. No. 38507
17616
Bowl
Part No.
SC-1-1
SC-22-1
XRef. No. 38508
17617
Basket Grapple Part No.
SC-1-4
SC-2-4
XRef. No. 38509
17618
SC-1-5
SC-2-1
Control
XRef. No. 38510
17619
Maximum Catch
33/8
321/32
3
Standard OD
4 /8
411/16
Standard Connection
27/8 Reg 27/8 Reg
Type
SH
SH
SC-6
SC-7
XRef. No. C11023
10543
Replacement Parts
Top Sub
Part No.
SC-6-3
SC-7-3
XRef. No. A11024 10544
Bowl
Part No.
SC-6-1
SC-7-1
XRef. No. B11025 10545
SC-6-4
SC-7-4
XRef. No. B11026 10546
SC-6-5
SC-7-5
Control
XRef. No. A11027 10547
Maximum Catch
41/4
43/4
3
Standard OD
5- /4
5-7/8
Standard Connection
31/2 FH
31/2 IF
Type
FS
SH
SC-11
SC-12
XRef. No. 13065
10560
Replacement Parts
Top Sub
Part No.
SC-11-3 SC-12-3
XRef. No. 13066
10561
Bowl
Part No.
SC-11-1 SC-12-1
XRef. No. 13067
10562
SC-11-4 SC-12-4
XRef. No. 13068
10563
SC-11-5 SC-12-5
Control
XRef. No. 13069
10564
Maximum Catch
61/2
7
Standard OD
81/4
81/2
Standard Connection
51/2 Reg 41/2 FH
Type
FS
FS
SC-16
SC-17
XRef. No. 38939
20050
Replacement Parts
Top Sub
Part No.
SC-16-3 SC-17-3
XRef. No. 38940
20051
Bowl
Part No.
SC-16-1 SC-17-1
XRef. No. 38941
20052
SC-16-4 SC-17-4
XRef. No. 38942
20053
SC-16-5 SC-17-5
Control
XRef. No. 38943
20054
www.gotco-usa.com
25/8
33/4
23/8 Reg
SH
SC-3
13535
31/16
45/8
21/2 Eue
FS
SC-4
11290
31/16
41/8
27/8 Reg
SH
SC-5
10434
SC-3-3
13536
SC-3-1
13537
SC-3-4
13538
SC-3-5
13539
SC-4-3
11295
SC-4-1
11291
SC-4-4
11292
SC-4-5
11294
SC-5-3
10435
SC-5-1
10436
SC-5-4
10437
SC-5-5
10438
321/32
55/8
31/2 FH
FS
SC-8
11297
33/4
43/4
31/2 FH
SH
SC-9
12645
33/4
51/2
31/2 FH
FS
SC-10
12785
SC-8-3
11298
SC-8-1
11299
SC-8-4
11300
SC-8-5
11301
SC-9-3
10544
SC-9-1
12646
SC-9-4
12647
SC-9-5
12648
SC-10-3
12786
SC-10-1
12787
SC-10-4
12788
SC-10-5
12789
43/4
6-5/8
41/2 FH
FS
SC-13
11303
6
7-5/8
41/2 FH
FS
SC-14
11630
61/4
77/8
41/2 IF
FS
SC-15
16975
SC-13-3
11304
SC-13-1
11305
SC-13-4
11306
SC-13-5
11307
SC-14-3
11631
SC-14-1
11632
SC-14-4
11633
SC-14-5
11634
SC-15-3
16976
SC-15-1
16977
SC-15-4
16978
SC-15-5
16979
73/4
91/4
41/2 IF
FS
SC-18
25030
8
93/4
65/8 Reg
FS
SC-19
20060
9
111/4
75/8 Reg
FS
SC-20
33878
SC-18-3
25031
SC-18-1
25032
SC-18-4
25033
SC-18-5
25034
SC-19-3
20061
SC-19-1
20062
SC-19-4
20063
SC-19-5
20064
SC-20-3
33878
SC-20-1
33880
SC-20-4
33881
SC-20-5
33882
Multi-Catch Overshots
MultiCatch Overshot
The Gotco Multi-Catch Overshot is an extremely reliable external
catch fishing tool designed to retrieve tubular items from the well
bore. It can save time and money when removing collapsed tubing, sucker rods, and coiled tubing from the well bores. With the
use of a full opening top sub, several thousand feet of sucker rods,
coiled tubing, or macaroni tubing may be swallowed and recovered in one trip.
Gotco Multi-Catch Overshot

Maximum Catch
2
23/8
3
7
Tool OD
3 /8
411/16
53/4
Gotco Assembly
MCO-37
MCO-46
MCO-56
Replacement Parts
Top Sub
OS-13-3
OS-3-3
0S-4-3
Barrel Assembly*
MCO-37-2
MCO-46-2
MCO-56-2
Barrel
MCO-37-3
MCO-46-3
MCO-56-3
Cover
MCO-37-4
MCO-46-4
MCO-56-4
Screws
MCO-37-5
MCO-46-5
MCO-56-5
Guide
OS-13-2
OS-3-2
OS-4-2
Concave Slip
MCO-37-7A
MCO-46-7A
MCO-56-7A
Flat Slip
MCO-37-7B
MCO-46-7B
MCO-56-7B
Convex Slip
MCO-37-7C
MCO-46-7C
MCO-56-7C
* Special Note: Barrel Assembly includes barrel, cover, and screws.
External Catch
Construction
The Multi-Catch Overshot
consists of three external parts:
the top sub, bowl, and guide. The
durable construction of the bowl
provides maximum strength and
pulling power. The slip, constructed of heat treated steel and hardened to ensure the best possible
grip, allows the overshot to catch
a varied range of outside diameters.

The overshot must be properly assembled and dressed with the
appropriate multi-range slip.
When reaching the top of the fish,
slowly rotate the fishing string and
lower the overshot over the fish to
the desired depth. To engage the
fish, raise the fishing string and
pull. The Multi-Catch Overshot is
not designed to be released after
engaging the fish. Therefore, it
should only be run below fishing
strings designed with enough
strength to pull or detach the fish
it engages.
How to Order Gotco

Multi-Catch Overshots

Name and part number.
Top connection, if nonstandard.
Diameter of fish.
Assembly Number
MCO-37
MCO-46
MCO-56
Concave
Slip
Flat
Slip
Slip Catch Ranges

Concave Slip
Flat Slip
15/16 - 19/16
15/8 - 21/4
21/16 - 211/16
11/8 - 13/4
23/8 - 31/4
13/8 - 21/4
Convex
Slip
Convex Slip
/ -1
7/16 - 11/16
1/2 - 13/8
38
Multi-Catch
Overshot
www.gotco-usa.com
15
External Catch
Sucker Rod Overshots
Series 10 and Series

20 Sucker Rod
Overshots
The Gotco, Series 10 and 20 Sucker Rod Overshots are
small, durable Overshots for retrieving sucker rods, couplings and other items from inside tubing strings.
The Gotco, Series 10 Sucker Rod Overshots are designed to
retrieve Sucker Rod Boxes up to 2 O.D. inside of 27/8 tubing
and up to 15/8 O.D. inside of 23/8 tubing.
The Gotco Series 20 Sucker Rod Overshots are designed for
short catch retrieval conditions. These tools engage the tubular
portion of the fish that is too short for retrieving with a standard
Overshot
Top
Sub
Top
Sub
Bowl
Bowl
Spiral
Grapple
Construction
The Series 10 Sucker Rod
Overshot consists of a Top
Sub, Bowl, Grapple, and a
Guide. The internal components are used to establish a
secure grip on the fish to
retrieve it easily. Depending
on the diameter of the fish to
be retrieved, a Spiral Grapple
or a Basket Grapple will be
used. When the fish diameter
approaches the maximum
catch of the Overshot a Spiral
Grapple is required. When a
Spiral Grapple is used, a
Control Guide must also be
used on the tool. When the
fish diameter is substantially
under the maximum catch
limits of the Overshot a Basket
Grapple is used. This assembly will require a Basket
Grapple Control and a Plain
Guide.
The Series 20 Short Catch
Sucker Rod Overshot consists
of a Top Sub, Bowl, Basket
Grapple and a Basket Grapple
Control. The arrangement of
the internal parts is slightly
different from the Series 10
Overshot in that the Grapple
Control is placed at the top of
the tool between the Top Sub
and the Basket Grapple. This
Basket
Grapple
Basket
Grapple
Control
Spiral
Grapple
Control
Guide
Series 10
Sucker Rod Overshot
with Spiral Grapple
16
Plain
Guide
Series 10
Sucker Rod Overshot
with Basket Grapple
www.gotco-usa.com
will allow for the exposed portion of the fish to enter the
Basket Grapple further since
the Grapple is now located in
the lowermost position in the
Bowl.
The Overshot should be
dressed with the proper size
and type of Grapple and related
support
equipment.
Makeup the Overshot on the
fishing string and run into the
hole. When the Overshot nears
the top of the fish, engage it by
slowly rotating to the right
while gradually lowering the
Overshot over the fish.
Release any right-hand torque
out of the fishing string and
pull on the fish by elevating
the fishing string.
To Release from the Fish

Bump down the full weight
of fishing string. Rotate to the
right while picking up slowly.
The left hand wicker threads
on the inner surface of the
grapple will allow the grapple
to unscrew from the fish.
To Release from the
retrieved fish, follow this same
procedure while securing the
fish below the Overshot
Sucker Rod Overshot
Gotco Series 20 Sucker Rod Overshots

13/8
Overshot O.D.
13/4
Type
S.H.
Comp. Assembly
Part No.
SRSC-5
XRef. No.
18355
Top Sub
Part No.
SRSC-5-3
XRef. No.
18356
Bowl
Part No.
SRSC-5-1
XRef. No.
18357
Basket Grapple
Part No.
SRSC-5-4
XRef. No.
18358
Basket GrappleControl Part No.
SRSC-5-5C
XRef. No.
18359
11/2
129/32
S.H.
SRSC-7
11555
113/16
25/16
S.H.
SRSC-8
17438
21/8
225/32
S.H.
SRSC-10
18305
SRSC-7-3
9341
SRSC-7-1
11556
SRSC-7-4
11557
SRSC-7-5C
11558
SRSC-8-3
9401
SRSC-8-1
17439
SRSC-8-4
17440
SRSC-8-5C
17441
SRSC-10-3
18306
SRSC-10-1
18307
SRSC-10-4
18308
SRSC-10-5C
18309
External Catch
Top
Sub
Basket
Grapple
Control
How to Order
Gotco Series 10 and 20 Overshots
Basket
Grapple

Name and number of assembly or part.
Top connection desired.
Size and type of fish to be caught.
Bowl
Recommended Spare Parts
2 grapples for each catch size.

1 grapple control.
Gotco Series 10 Sucker Rod Overshots

11/2
15/8
15
1 /16
17/16
Overshot O.D.
125/32
129/32
Type
SH
SH
SROS-5
SROS-7
XRef. No.
13940
9340
Top Sub
Part No.
SROS-5-3
SROS-7-3
XRef. No.
13941
9341
Bowl
Part No.
SROS-5-1
SROS-7-1
XRef. No.
13942
9342
Plain Guide
Part No.
SROS-5-2
SROS-7-2
XRef. No.
13944
9345
Spiral Grapple
Part No.
SROS-5-8
SROS-7-8
XRef. No.
13943
9343
Spiral Grapple
Part No.
SROS-5-2S SROS-7-2S
Control Guide
XRef. No.
13945
9349
SROS-5-4
SROS-7-4
XRef. No.
13943
9343
SROS-5-5C SROS-7-5C
Control
XRef. No.
13947
9344
Spiral Grapple
Part No.
Control
XRef. No.
Series 20
Sucker Rod Overshot
15/8
17/16
25/16
FS
SROS-11
9880
113/16
15/8
21/8
SH
SROS-14
27765
115/16
13/4
21/4
SH
SROS-17
16070
2
113/16
25/16
SH
SROS-19
9400
2
113/16
27/8
FS
SROS-23
9530
23/8
23/16
227/32
SH
SROS-25
15860
SROS-11-3
9341
SROS-11-1
9881
SROS-11-2
9882
SROS-14-3
27766
SROS-14-1
27767
SROS-14-2
27769
SROS-17-3
16071
SROS-17-1
16072
SROS-17-2
16075
SROS-19-3
9401
SROS-19-1
9402
SROS-19-2
9404
SROS-23-3
9531
SROS-23-1
9532
SROS-23-2
9533
SROS-25-3
15863
SROS-25-1
15861
SROS-25-2
15862
SROS-11-8
9343
SROS-11-2S
9883
SROS-14-8
27768
SROS-14-2S
27764
SROS-17-8
16073
SROS-17-2S
16076
SROS-19-8
9403
SROS-19-2S
9406
SROS-23-8 SROS-25-8
9403
9872
SROS-23-2S
9535
SROS-11-4
9343
SROS-11-5C
153338
SROS-14-4
27768
SROS-14-5C
27763
SROS-17-4
16073
SROS-17-5C
16074
SROS-19-4
9403
SROS-19-5C
9045
SROS-23-4
9403
SROS-23-5C
9405
www.gotco-usa.com
SROS-25-4
9872
SROS-25-5C
9873
SROS-25-7
9873
17
External Catch Die Collars
Die Collar
The Gotco Die Collar is an external catch fishing tool designed
to retrieve tubular members from the well bore.
Construction
The Die Collar is manufactured from high grade alloy and

specially heat treated. The hardened cutting teeth (wickers) are
machined on a shallow taper
(approximately 3/4 inch per foot) to
provide an excellent grip and positive engagement. Plain watertight wicker's are furnished as
standard equipment. Fluted wickers are also available on request.
Die Collars are available with
plain, lipped, or mill type bottom,
or with threaded bottom for
attaching a standard lipped or
oversized guide.
Assemble the Die Collar to

the bottom of the fishing string.
Run in the hole until reaching the
fish. Apply minimum weight
(less than one point) and rotate
sufficiently to allow the wicker
threads to become embedded in
the exterior surface of the fish.
Caution: Be careful not to apply
excessive weight or to rotate
excessively. This could cause
damage to the wickers. Once the
fish has been securely engaged, it
can be lifted from the hole.
Standard Components
A standard or oversized
guide can be assembled to the
bottom of the Die Collar, if it has
been ordered with the optional
lower thread. When the hole size
is considerably larger than the
diameter of the fish, there may be
sufficient room for the Die Collar
to pass alongside of the fish without engaging it. In this case, an
oversized guide can be used to
assure fish engagement and to
properly guide the fish into the
Die Collar.
Standard Die Collars are supplied with right-hand threads.
Left-hand threads are available on
request at no extra charge.
When extra long Die Collars
(those having a catching range
considerably larger than the standard sizes) are requested, it may
be necessary to provide a two or
three piece welded assembly. Ask
your Gotco sales representative
for expert advice on ordering.
Gotco Die Collars

Nominal Size
To Catch
Total Length
Outside Diameter
Small Wicker Diameter
Large Wicker Diameter
Gotco* Part No.
/ Pipe
1.050
8
1.660
7/8
13/16
DC-1
1 Pipe
1.315
17
113/16
1
11/2
DC-2
1 Upset
1.469
15
129/32
11/8
15/8
DC-3
11/4 Pipe
1.660
12
25/16
13/8
17/8
DC-4
Gotco Die Collars

Nominal Size
To Catch
Total Length
Outside Diameter
Small Wicker Diameter
Large Wicker Diameter
Gotco* Part No.
23/8 Reg
31/8
24
43/16
21/2
35/16
DC-7
23/8 IF
33/8
24
47/16
23/4
39/16
DC-8
27/8 Pipe
27/8
24
4
21/4
31/16
DC-9
27/8 Upset 27/8 Reg

37/32
33/4
24
24
43/8
47/8
5
2 /8
31/8
37/16
315/16
DC-10 DC-11
27/8 I.F.
41/8
24
51/4
31/2
45/16
DC-12
34
23/8 Pipe
23/8
24
37/16
13/4
29/16
DC-5
23/8 Upset
221/32
24
311/16
2
213/16
DC-6
Gotco Die Collars

Nominal Size
31/2 Pipe
To Catch
31/2
Total Length
32
Outside Diameter
43/4
Small Wicker Diameter 25/8
Large Wicker Diameter 33/4
Gotco* Part No.
DC-13
31/2 Upset31/2 Reg

313/16 41/4
32
32
51/16
51/2
15
2 /16 33/8
41/16
41/2
DC-14 DC-15
31/2 F.H.
45/8
32
57/8
33/4
47/8
DC-16
31/2 I.F.
43/4
32
6
37/8
5
DC-17
41/2 Pipe
41/2
36
57/8
3/8
43/4
DC-18
Gotco Die Collars

Nominal Size
41/2 Upset
To Catch
5
Total Length
36
Outside Diameter
63/8
Gotco* Part No.
DC-19
41/2 Reg
51/2
36
67/8
43/8
53/4
DC-20
41/2 FH
53/4
36
71/8
45/8
6
DC-21
41/2 IF
61/8
36
71/2
5
63/8
DC-22
59/16 Pipe
59/16
42
71/16
315/16
513/16
DC-23
59/16 Upset
61/16
42
79/16
47/16
65/16
DC-24
Gotco Die Collars

Nominal Size
59/16 Reg
To Catch
63/4
Total Length
42
Outside Diameter
81/4
Large Wicker Diameter 7
Gotco* Part No.
DC-25
59/16 FH
7
42
81/2
53/8
71/4
DC-26
59/16 IF
73/8
42
87/8
53/4
75/8
DC-27
65/8 Pipe
65/8
42
81/8
5
67/8
DC-28
65/8 Upset 65/8 Reg

71/8
73/4
42
42
85/8
91/4
1
5 /2
61/8
73/8
8
DC-29 DC-30
65/8 Reg
85/8
42
103/4
77/8
93/4
DC-33
65/8 Reg
103/4
46
135/8
10
12
DC-34
Gotco Die Collars

Nominal Size
65/8 F.H. 65/8 I.F.
To Catch
8
81/2
Total Length
42
42
Outside Diameter
91/2
10
67/8
83/4
Gotco* Part No.
DC-31 DC32
* Type-A Plain or Lipped-bottom Die Collar
How to Order Gotco Die Collars
Die Collar
18

O.D. of fish to be retrieved
Fluted wickers, if required
www.gotco-usa.com
O.D., if nonstandard
Left -hand threads or wickers, if required
Desired catch range, if nonstandard
Taper Taps
Construction
Taper Tap
The Gotco Taper Tap is an internal catch fishing tool designed to
retrieve tubular members from the well bore. It is the most economical tool of its kind for freeing fish.
Gotco Taper Taps
5
Nominal Size
/8 SR
Outside Diam.
11/2
1
To Catch
/2, 1, ID
Total Length
16
Smallest Wicker Dia. 3/8
Largest Wicker Dia. 11/4
Gotco Part No.
TT-1
Gotco Taper Taps
Nominal Size
11/4 Eue
Outside Diam.
23/8
To Catch
11/4 Pipe
Total Length
Smallest Wicker Dia.
Largest Wicker Dia.
Gotco Part No.
20
/8
17/8
TT-6
7
Gotco Taper Taps

Nominal Size
27/8 IF
Outside Diam.
41/8
To Catch
27/8 Pipe
API HYDTJ
Total Length
27
Largest Wicker Dia. 23/4
Gotco Part No.
TT-11
Gotco Taper Taps
Nominal Size
4 FH
Outside Diam.
51/4
To Catch
4 FHTJ
Total Length
Smallest Wicker Dia.
Largest Wicker Dia.
Gotco Part No.
36
25/16
315/16
TT-16
Gotco Taper Taps

Nominal Size
51/2 Reg
Outside Diam.
63/4
To Catch
51/2 or
59/16, RegTJ
Total Length
38
Largest Wicker Dia. 4
Gotco Part No.
TT-21
Internal Catch
/4 SR
13/4
5
/8, 11/4, ID
18
1/2
11/2
TT-2
113/16 WFJ
113/16
3
/4, 13/8, ID
18
5/8
15/8
TT-3
1 Eue
1.9
1 Pipe
18
3/4
13/4
TT-4
7
/8 SR
25/16
7
/8, 11/2, ID
20
3/4
13/4
TT-5
23/8 Eue
31/16
23/8 OD
CPL
27
15/8
25/8
TT-7
23/8 Reg
31/8
23/8 Reg
TJ
27
5/8
15/8
TT-8
23/8 IF
33/8
23/8 IF
HYDTJ
27
13/8
23/8
TT-9
27/8 Reg
33/4
27/8 Reg TJ
31/2 Reg
41/4
31/2 Reg
TJ
33
1
21/2
TT-12
31/2 FH
45/8
31/2 Pipe
API FH TJ
33
15/8
31/8
TT-13
31/2 IF
43/4
31/2 IF TJ
31/2 Pipe
33
23/16
311/16
TT-14
41/2 Reed DS
5
41/2 Reg
DS TJ
33
25/16
313/16
TT-15
41/2 Reg
51/2
41/2 Reg
TJ
36
13/4
33/8
TT-17
41/2 FH
53/4
4 IF TJ
41/2 Pipe
36
25/8
41/4
TT-18
41/2 XH
41/2 IF
6
61/8
1
4 /2 XH TJ 41/2 IFTJ
41/2 Pipe
36
36
27/8
31/4
41/2
43/4
TT-19
TT-20
51/2 FH
7
51/2 or
59/16, FH TJ
38
35/8
53/8
TT-22
51/2 IF
73/8
51/2 or
59/16, IF TJ
38
41/4
6
TT-23
65/8 Reg
73/4
65/8 Reg
TJ
38
3
43/4
TT-24
27
/
17/8
TT-10
78
65/8 FH
8
65/8 FH IF
Pipe
38
45/8
63/8
TT-25
The Taper Tap is manufactured from high grade alloy and

specially heat treated. The basic
Taper Tap is a single piece construction. The hardened cutting
teeth (wickers) are carbo-nitrided
and machined on a shallow taper
(approximately 3/4 inch per foot) to
provide an excellent grip for light
duty pick-up jobs. Plain watertight wickers are furnished as
standard equipment. Fluted wickers are also available on request.
Taper Taps are furnished either
plain or threaded for skirts.
Optional Components
Skirt The skirt is used
when the Taper Tap has been
threaded for a skirt. The skirt is
assembled to the Taper Tap and
will assist in guiding the fish for
proper engagement and retrieval.
Several types of skirts can be
ordered; plain end, lipped end, or
threaded end with a thread protector for adding standard oversized
guide.
Guides A guide can be
assembled to the bottom of a
threaded skirt. When the hole size
is considerably larger than the
diameter of the fish, there may be
How to Order Gotco Taper Taps

I.D. of fish to be retrieved
Taper Tap
Assemble the Taper Tap to

the bottom of the fishing string.
Run in the hole until reaching the
fish. Apply minimum weight
(less than one point) and rotate
sufficiently to allow the wicker
threads to be embedded into the
interior surface of the fish. (Be
careful not to apply excessive
weight or to rotate excessively.
This could cause damage to the
wickers.) Once the fish has been
securely engaged, it can be lifted
from the hole.
Fluted wickers, if required

O.D., if nonstandard
Left -hand threads or wickers, if required
www.gotco-usa.com
Skirted Taper Tap
sufficient room for the Taper Tap to

pass along side of the fish without
engaging it. In this case, an oversized guide can be used to engage
the fish securely and to properly
guide it onto the Taper Tap.
Standard Taper Taps are supplied with right-hand threads.
Left-hand threads are available on
request at no extra charge.
19
Internal Catch Grapple Releasing Spear
Construction
Grapple
Releasing Spear
The Gotco Grapple Releasing Spear is an internal catch fishing
tool designed to retrieve tubular members from the well bore. It
is a rugged, dependable, and inexpensive device. The simple
design assures positive engagement throughout the fishing operation, is easy to release and re-engage if necessary and may be
run in conjunction with other equipment such as pack-off attachments and internal cutting tools.
The basic Gotco Grapple

Releasing Spear consists of a
mandrel, a grapple, a bull nose
nut, and a release ring. The mandrel is made of specially heat
treated high strength alloy steel;
and may be ordered either as a
flush type to enter completely
into a fish or as a shoulder type to
provide a positive landing position on top of the fish. Size and
type of the upper box connection
is provided according to customers exact specifications.

First screw the grapple onto
the mandrel. (Note: This is a lefthand thread.) Slip the release ring
onto the end of the mandrel and
make up the nut. Screw the grapple down the mandrel hand tight
against the release ring. This puts
the tool into the run-in position.
Make up spear to bottom
of fishing string. Run in and
position the spear in the fish,
then rotate the mandrel one full
turn to the left. The grapple
should now be engaged. Pulling
straight up will cause the tapers
on the mandrel to expand the
grapple and will allow the grapple to bite into the fish.
To disengage the grapple,
bump down and rotate to the
right several turns. Pulling
straight up should free the
spear. When coming out of the
fish, continue to rotate slowly
to the right.
Standard Components
Mandrel The mandrel has
an upper box type connection cut
according to customers specifications. The lower end is threaded
to accept the bull nose nut or can
also accept a mill nose, sub, or
side hill nut. The central body of
Grapple Releasing Spear
20
www.gotco-usa.com
the mandrel has a helical tapered

configuration where the grapple
is installed. This tapered O.D.
matches the I.D. of the grapple
and provides the basic mechanism for proper engagement and
retrieval.
Grapple Each grapple is
machined to fit a specific size and
weight of pipe, tubing, or casing.
This assures maximum surface
engagement and minimum fish
distortion.
Bull Nose Nut with release
ring A Bull Nose Nut and
release ring are standard components of the Grapple Releasing
Spear.
Optional Components
Segment Spear Grapples
The 85/8-inch and 95/8-inch spears
can be fitted with a segmented
grapple assembly. With this
assembly, the 85/8-inch spear can
be used to pull up to 133/8-inch
casing. The 95/8-inch tool can be
used to pull up to 20-inch casing.
This greatly enhances the spears
usefulness.
Mill Nose, Side Hill and Sub
Nuts These components are
available as accessories. The mill
nose nut can be used to clean the
top of the fish in case it is badly
distorted and obstructs the entrance of the spear. The side hill
nut design allows the spear to be
inserted when the fish is partially
embedded in the side of the hole.
The sub nut allows additional tools
to be assembled below the spear.
Pack-off Attachment A
pack-off assembly is available to
attach below the spear when
using the sub nut.
Stop Sub A shouldered
stop sub can be ordered to convert
the flush type spear into a shouldered type. A stop ring can be
added to increase the shouldered
diameter.
Junk Catchers Reverse Circulating Junk Basket
Reverse Circulating
Junk Basket
The Gotco Reverse Circulating Junk Basket (RCB) is a junk
retrieval tool designed to remove all types of objects from the
bottom of the well bore. This superior tool removes such items
as slips, hand tools, bit cones, and any other small pieces of
junk from the well. The RCB uses reverse circulation to aid
junk recovery.
Construction
The tool consists of a top sub,
barrel assembly, catcher, and
shoe. The barrel assembly con-
sists of an inner and outer barrel,

valve seat, cup, and ball. A lift sub
is also provided to assist in handling.

Make up the junk basket to
the bottom of the string and run
into the hole. When the tool is
approximately 10 feet from the
bottom of the hole, the ball is
dropped down the drill pipe. The
ball will position itself in the ball
seat and reverse circulation will
begin. Circulate and begin coring.
Combined with the reverse circulation, this guarantees that any
junk on the bottom is pumped into

the barrel and caught by the catcher assembly. The tool is removed
from the hole after cutting 10 to
20 inches of core.
Optional Components
and Accessories
Shoes - Four types of shoes
are available to fit the Reverse
Circulating Junk Basket.
Type A mill shoe is supplied
as standard equipment with the
cutting teeth dressed with hard
metal and has side wings. The
type A mill shoe is used where the
formation is relatively soft and
the fish is a loose piece.
Type B mill shoe is equal in
design to the type A shoe, however, it is hard faced with Gotcoloy
a sintered tungsten carbide in an
extremely tough matrix which
will effectively and rapidly mill
up junk during the fishing operation. This shoe will cut on O.D.,
I.D. and bottom.
Type C mill shoe is also hard
faced with Gotcoloy, however, is
designed with a flat bottom, and
How to Order Gotco

Reverse Circulating Junk Baskets

Connection, if nonstandard
O.D. and type of shoe
Recommended Spares
2 Junk Catchers
1 Valve Seat
1 Steel Ball
2 Mill Shoes
1 Valve Cup
Reverse Circulating
Junk Basket
22
Catcher
www.gotco-usa.com
the Gotcoloy is placed on the

inner face and the outer face. This
design is used to mill up junk and
is extremely effective for cutting
cores.
Type B or type C Gotcoloy
dressed milling shoes are used if
the formation is hard or if the fish
is embedded in the formation.
Use of these two designs also cuts
away protruding excess metal to
allow free entry of the junk into
the basket.
Finger Shoe - For retrieving
loose junk on the bottom of the
hole which may exceed the maximum catch of the RCB can be
retrieved by use of a finger shoe
assembly. The assembly consists
of a shoe extension and the finger
replacement. The entire assembly
is used in place of a mill shoe.
The fingers are designed to close
in beneath the fish when slowly
lowered during rotation. Finger
replacements can be replaced easily and are very inexpensive.
Magnet Inserts - The RCB
can be easily converted to a fishing magnet by removing the
catcher assembly and replacing it
with a magnet insert. The insert
still allows direct or reverse circulation and can be used with A, B
or C type shoes, or special shoes
designed to customer specifications. The magnet insert is the
same design as the Gotco Fishing
Magnet and by adding a top sub
to the magnet insert, it can be
used independently as a fishing
magnet.
Reverse Circulating Junk Basket
Reverse Circulating Junk Basket Standard

Hole Size
33/4 -4
41/8 -41/2
5
Barrel OD
3 /8
4
Fish Dia., Max.
211/32
217/32
No. of Mill Teeth
6
6
Gotco Complete
Part No. RCB-050 RCB-1
Assembly
XRef No. 6635
7295
Replacement Parts
Top Sub
Part No. RCB-050-1 RCB-1-1
XRef No. 6636
7296
Barrel
XRef No. 6637
7297
Valve Cup
XRef No. 6638
6638
Steel Ball
XRef No. 6640
6640
Valve Seat
XRef No. 6639
6639
Lifting Sub
XRef No. 4568
4568
Junk Catcher
XRef No. 21795W
21855W
Mill Shoe, Type A
Part No. RCB-050-8ARCB-1-8A
XRef No. 6642A
7299A
Mill Shoe, Type B
Part No. RCB-050-8BRCB-1-8B
XRef No. 6642B
7299B
Mill Shoe, Type C
Part No. RCB-050-8CRCB-1-8C
XRef No. 6642C
7299C
Reverse Circulating Junk Basket Standard
Hole Size
83/8-91/2
95/8-105/8
7
Barrel OD
7 /8
91/8
Fish Dia., Max.
61/16
71/16
No. of Mill Teeth
8
10
Gotco Complete
Part No. RCB-6
RCB-8
Assembly
XRef No. 2567
2659
Replacement Parts
Top Sub
XRef No. 2568
2660
Barrel
XRef No. 2569
2661
Valve Cup
XRef No. 2570
2662
Steel Ball
XRef No. 2572
2665
Valve Seat
XRef No. 2571
2663
Lifting Sub
XRef No. 426
427
Junk Catcher
XRef No. 18725W
14633W
Mill Shoe, Type A
Part No. RCB-6-8A RCB-8-8A
XRef No. 2574A
2668A
Mill Shoe, Type B
Part No. RCB-6-8B RCB-8-8B
XRef No. 2574B
2668B
Mill Shoe, Type C
Part No. RCB-6-8C RCB-8-8C
XRef No. 2574C
2668C
45/8 -5
41/2
31/16
8
RCB-2
4448
51/8 -51/2
47/8
39/16
8
RCB-3
4572
55/8 -6
51/8
33/4
8
RCB-41
2618
61/8 -61/2
53/4
413/32
8
RCB-4
2670
65/8 -73/8
61/4
43/4
8
RCB-42
2677
71/2- 81/4
7
53/16
8
RCB-5
2554
RCB-2-1
4449
RCB-2-2
4450
RCB-2-3
4451
RCB-2-4
4453
RCB-2-5
4452
RCB-2-6
424
RCB-2-7
21780W
RCB-2-8A
4455A
RCB-2-8B
4455B
RCB-2-8C
4455C
RCB-3-1
4573
RCB-3-2
4574
RCB-3-3
4451
RCB-3-4
4453
RCB-3-5
4452
RCB-3-6
424
RCB-3-7
21790W
RCB-3-8A
4576A
RCB-3-8B
4576B
RCB-3-8C
4576C
RCB-41-1
2619
RCB-41-2
2620
RCB-41-3
2621
RCB-41-4
2623
RCB-41-5
2622
RCB-41-6
425
RCB-41-7
21735W
RCB-41-8A
2625A
RCB-41-8B
2625B
RCB-41-8C
2625C
RCB-4-1
2671
RCB-4-2
2672
RCB-4-3
2621
RCB-4-4
2623
RCB-4-5
2622
RCB-4-6
425
RCB-4-7
28349W
RCB-4-8A
2676A
RCB-4-8B
2676B
RCB-4-8C
2676C
RCB-42-1
2678
RCB-42-2
2679
RCB-42-3
2621
RCB-42-4
2623
RCB-42-5
2622
RCB-42-6
1849
RCB-42-7
21750W
RCB-42-8A
2683A
RCB-42-8B
2683B
RCB-42-8C
2683C
RCB-5-1
2493
RCB-5-2
2555
RCB-5-3
2570
RCB-5-4
2572
RCB-5-5
2571
RCB-5-6
1849
RCB-5-7
21725W
RCB-5-8A
2556A
RCB-5-8B
2556B
RCB-5-8C
2556C
103/4-115/8
101/8
711/16
12
RCB-9
2684
113/4-121/2
11
85/16
12
RCB-10
2690
125/8-135/8
117/8
811/16
14
RCB-11
2696
133/4-16
13
97/8
16
RCB-12
2702
16-171/2
15
111/8
RCB-9-1
2685
RCB-9-2
2686
RCB-9-3
2662
RCB-9-4
2665
RCB-9-5
2663
RCB-9-6
427
RCB-9-7
18945W
RCB-9-8A
2689A
RCB-9-8B
2689B
RCB-9-8C
2689C
RCB-10-1
2691
RCB-10-2
2692
RCB-10-3
2662
RCB-10-4
2665
RCB-10-5
2663
RCB-10-6
427
RCB-10-7
21760W
RCB-10-8A
2695A
RCB-10-8B
2695B
RCB-10-8C
2695C
RCB-11-1
2697
RCB-11-2
2698
RCB-11-3
2662
RCB-11-4
2665
RCB-11-5
2663
RCB-11-6
427
RCB-11-7
21840W
RCB-11-8A
2701A
RCB-11-8B
2701B
RCB-11-8C
2701C
RCB-12-1
2703
RCB-12-2
2704
RCB-12-3
2662
RCB-12-4
2665
RCB-12-5
2663
RCB-12-6
427
RCB-12-7
21770W
RCB-12-8A
2707A
RCB-12-8B
2707B
RCB-12-8C
2707C
RCB-13-1
2709
RCB-13-2
2710
RCB-13-3
2662
RCB-13-4
2665
RCB-13-5
2663
RCB-13-6
427
RCB-13-7
21775W
RCB-13-8A
2713A
RCB-13-8B
2713B
RCB-13-8C
2713C
www.gotco-usa.com
Junk Catchers
B Shoe
C Shoe
RCB-13
2708
Lift Sub
23
Junk Catchers Jet Type Junk Basket
Construction
Jet Type Junk

Basket
The Gotco Jet Type Junk Basket is designed to recover objects
from the bottom of the well bore. This superior tool removes
items such as slips, hand tools, rock bit cones, and any other
small pieces of junk from the well.
The tool consists of a top

sub, jet barrel, lower barrel, jet
assembly section, jets, ball
seat, drop ball, shoe, and
catcher assembly. A lift sub is
available to assist in handling
and for storage of the steel
drop ball.
Top
Sub
Gap Spring
Shear Pins
Seals, Pump Head
Drop
Ball
Jet Pump Head

Jet Nozzles
Ball Seat
Seals, Ball Seat
Jet Barrel
Filter Nozzle
Lower Barrel
Make up the junk basket to

the bottom of the string and
run into the hole. (see figure
1) When the tool is approximately 4 to 6 feet off the bottom of the hole, circulation is
initiated to wash the hole in
order to retrieve junk. During
this operation, the ball seat is
secured in place within the
upper portion of the jet pump
head with shear pins. This
seals off the reverse circulation jet ports providing full circulation through the entire
length of the tool. The barrel,
jet assembly, and junk catchers
will be washed clean going
into the hole while preparing
for junk retrieval.
When the tool is over the
fish (junk), the steel drop ball
is then dropped through the
inside diameter and seats
inside the ball seat. (see figure
2) When pump pressure is
applied, the pins will shear
allowing the ball seat to drop

down into the lower section of
the jet pump head. The flow
will now be directed out of the
jet nozzles at an angle as to not
washout the hole. Flow will
then be directed downward
and back up through the junk
basket catcher, lower barrel,
jet housing, around the jet
nozzles, and back out of the jet
barrel ports. Thus, creating
reverse circulation and directing junk into the catcher
assembly.
The Jet Type Junk Basket
can easily be converted to a
standard Core Basket by simply removing the Jet Barrel
and Jet Assembly and screwing the Lower Barrel directly
to the Top Sub.
O.D. Conversion and
Accessories
The Lower Barrel can be
replaced by an oversized barrel in order to adapt to a larger

junk catcher assembly. There
are four types of mill shoes
available to fit the Jet Type
Junk Basket. Type A, B, C,
and the Finger Type Shoe. See
standard Shoes in Reverse
Circulation Junk Basket
Section on page 22.
Sizes available upon request.

Cather Assembly
Shoe
Jet Junk Basket

Fig 1
24
Jet Junk Basket

Reverse Flow
Fig 2
www.gotco-usa.com
Core-Type Junk Basket
Core-Type
Junk Basket
The Gotco Core-Type Junk Basket is a junk retrieval tool
designed to retrieve all types of objects from the bottom of the
well bore. This easy-to-use tool removes such items as slips, hand
tools, and bit cones. The basic assembly consists of a top sub,
barrel, type A mill shoe, upper and lower catchers.
Make up the core basket to
the bottom of the string and run it
in the hole to a point several feet
from the bottom. With direct circulation, the coring action on the
junk proceeds until a 24 inch core
is cut. The fingers in the upper
catcher break the core when an
upward strain is applied to the
string. The lower catcher fingers
then form a close-fitting basket

that traps the core with its
retrieved junk. As in the other
junk basket designs, they are free
to revolve within the shoe, thus
eliminating finger breakage.
Junk Catchers
ket systems: Type A shoe with

side wings, Type B shoe with
hard-faced Gotcoloy sintered
tungsten carbide, and Type C shoe
with flat bottom and Gotcoloy on
the inner and outer faces.
Magnet Inserts A magnet
insert can be used in place of the
catcher assemblies, thus converting the tool to a fishing magnet.
Finger Shoe A finger shoe
is used to retrieve junk that may
be too large to enter the catchers.
Optional Components
and Accessories
Three types of milling shoes
are available for all core-type bas-
Catcher
How to Order Gotco Core-Type Junk Baskets

Top connection (box)
Shoe type and O.D.
Recommended Spares
2 Upper Catchers
2 Lower Catchers
2 Mill Shoes
C Shoe
Gotco Core-Type Junk Basket

Hole Diameter
33/4 - 41/8
Tool OD
35/8
23
Maximum Fish Diameter
2 /32
Standard Shoe OD
35/8 - 41/8
Gotco Assembly
Part No.
CB-362
41/4 - 41/2
31/4
31/
2 32
41/16 - 41/2
CB-325
45/8 - 5
37/8
39/32
1
4 /2 - 5
CB-387
45/8 - 5
37/8
33/8
1
4 /2 - 5
CB-387-1
51/8 - 51/2
41/4
39/32
7
4 /8 - 51/2
CB-425
55/8 - 6
51/8
25/
3 32
51/8 - 53/4
CB-512

Hole Diameter
55/8 - 6
Tool OD
43/4
41/16
Standard Shoe OD
53/8 - 6
Gotco Assembly
Part No.
CB-475
61/8 - 61/2
53/4
43/8
53/4 - 61/2
CB-575
61/8 - 65/8
51/8
45/16
57/8 - 65/8
CB-512-1
6 - 63/8
51/8
41/2
57/8 - 63/8
CB-512-2
63/4 - 71/4
53/4
43/16
61/4 - 71/4
CB-575-1
73/8 - 81/4
61/2
57/16
71/8 - 81/4
CB-650

Hole Diameter
83/8 - 91/4
Tool OD
71/2
63/16
Standard Shoe OD
81/8 - 91/4
Gotco Assembly
Part No.
CB-750
93/8 - 101/4
81/2
73/16
91/8 - 101/4
CB-850
103/8 - 117/8
93/8
81/16
101/8 - 117/8
CB-937
113/4 - 141/4
103/8
91/16
111/4 - 141/4
CB-1037
125/8 - 15
113/8
101/16
121/4 - 15
CB-1137
143/8 - 18
133/4
121/16
141/2 - 18
CB-1375
www.gotco-usa.com
Core-Type
Junk Basket
25
Junk Catchers Fishing Magnet
Fishing Magnet
The Gotco Fishing Magnet is a junk retrieval tool designed to
effectively remove metal particles, shavings, and debris from the
bottom of the well bore. The process of retrieving small, oddly
shaped objects is one of the most frequent and most difficult
fishing jobs. Typically, these objects are the result of bit failures
that leave cones and cutters in the hole, or are an accumulation of
mill cuttings, or are simply accidental droppings of unmillable
objects into the hole. In these cases, the fish is nearly always an
odd-shaped object that cannot be engaged in the normal manner.
Fishing magnets successfully remove these small objects from
the hole bottom. The tools design incorporates generous circulation holes that wash away the cuttings and other debris that otherwise would prevent contact with the magnet. Fishing magnets
can be run on either wire line or pipe.
Construction
The fishing magnet is constructed from steel specially
selected for its ability to conduct
the necessary magneto-motive
forces. The magnet element is
one of the most powerful permanent magnets available. Used
properly, it will never lose its
charge. A variety of shoes are

available to accommodate any
retrieval situation. Caution:
Magnets are charged while in the
assembled state and should not
be disassembled. Disassembly is
dangerous and can cause serious
injury due to the extreme forces
generated by the magnet element.

No assembly is required other
than selecting the desired shoe
and installing it on the lower end
of the magnet assembly. Make up
the magnet assembly to the bottom of the fishing string. Run in
the hole, and hold the magnet 6 to
12 inches above the fish.
Circulate generously to wash
away cuttings. Reduce circulation, lower the magnet to the fish,
and rotate slightly to obtain good
contact. Cut off circulation and
lift the magnet from the hole.
Optional Components
and Accessories
Fishing Magnet
26
Guides A flush guide is

assembled as standard equipment.
Lipped guides and mill guides are
also available. The lipped guide
assists the operator in centralizing
the fish to assure contact with the
magnet. The mill guide enables
the operator to mill any soft formation or settling, thus freeing
the debris at the bottom of the
hole.
Wire Line Adapter An

adapter is available to install
between the magnet and the cable
head or socket.
Magnet Charger The
Gotco Magnet Charger provides
the highest strength possible for
recharging your fishing magnets.
While magnets should not lose
their effectiveness during normal
handling and operation, conditions exist which can reduce their
charge. Welding a magnet subjects the magnet circuit to electrical current which can adversely
affect the charge. Similarly, storing the magnet in the vicinity of
electric motors, or bringing magnets too close to each other can be
detrimental to the magnets
strength. Recharging is quick and
simple. There is no limit to the
Gotco Fishing Magnets
Hole Size
1 - 11/4 15/8 - 51/2
Tool OD
1
11/4
5
Connection
/8 -11 5/8 SR
Approx. Pull, lb. 5-7
8-10
Gotco Assembly FM-1 FM-2
2 - 23/4
11/2
5
/8 SR
11-14
FM-3
number of times a magnet can be

recharged, and with proper handling a recharged magnet will
retain maximum strength indefinitely.
Keepers Keeper bars are
recommended when magnets are
stored. They are placed on the
face of the magnet and will consume most of the flux generated
by the magnet element. This will
reduce the potential for the attraction of miscellaneous metal items
or particles. Keepers can be safely
and easily removed at any time.
Air Shipments If shipping
by air, consult your freight forwarder. Special handling is
required by most airlines when
shipping magnetized items.
23/8 - 31/4
13/4
3
/4 SR
15-20
FM-4
23/4 - 35/8
21/4
3
/4 SR
25-75
FM-5
3 - 33/4
21/2
3
/4 SR
75-125
FM-6
31/4 - 41/8
3
23/8 TBG
125-200
FM-7

Hole Size
4 - 41/4
41/4-41/2
Tool OD
31/4
31/2
Connection
23/8 TBG 23/8 Reg
Approx. Pull, lb. 125-200 150-250
Gotco Assembly FM-8
FM-350
41/2 - 5
4
23/8 Reg
250-350
FM-9
51/8 - 51/2
41/2
27/8 Reg
350-450
FM-10

Hole Size
61/8 -61/2 65/8 -71/2
Tool OD
53/4
6
Connection
31/2 Reg 31/2 Reg
Approx. Pull, lb. 500-600 600-700
75/8 - 81/2
7
41/2 Reg
800-1000
FM-15
85/8 - 93/4
8
41/2 Reg
1000-1200
FM-16
97/8 -113/8
9
65/8 Reg
1200-1400
FM-17
101/2 - 117/8
10
65/8 Reg
1400-1600
FM-18

Hole Size
113/4 - 13 121/4 - 14
Tool OD
101/2
111/2
5
Connection
6 /8 Reg 65/8 Reg
Approx. Pull, lb. 1600-800 1800-2200
15 - UP
14
65/8 Reg
2500-3000
FM-21
17 - UP
16
65/8 Reg
2500-3000
FM-22
19
18
75/8 Reg
2500-3000
FM-23
24
22
75/8 Reg
2500-3000
FM-24
55/8 - 6
5
27/8 Reg
450-500
FM-11
How to Order Gotco Fishing Magnets

Name and part number of assembly.
Connection, if nonstandard.
www.gotco-usa.com
61/8 -61/2
51/2
31/2 Reg
500-600
FM-12
Ditch Magnet, Impression Block
Junk Catchers
Ditch Magnet
The Gotco Ditch Magnet is a junk retrieval tool designed to
remove metal particles from drilling mud. High quality stainless
steel is used to encapsulate a series of extra strength magnet elements assuring maximum pick-up capacity.
Ditch Magnet
Operation
The magnet should be used
any time metal particles may
accumulate in the mud. This is a
required tool during milling and
washover operations. Position the
magnet in the mud return line
before the shale shaker. Metal

particles passing by the magnet
will then be caught and retained,
protecting the shale shaker, mud
pumps and other costly components of the mud system.
Gotco Ditch Magnet

Overall Length
18
24"
30"
Ditch Magnet
Part No. DM-18 DM-24 DM-30
36"
DM-36
How to Order Gotco Ditch Magnet

Part number
Length, if nonstandard
Impression Block
The Gotco Impression Block is an accessory tool used to accurately determine the dimensions and configuration of the upper
end of a fish as well as to check its condition and position in the
well bore. The soft lead lower end of the impression block captures an impression of the fish upon making contact. Impression
blocks are manufactured with a pin connection up and a layer of
soft lead on the lower end of the tool. Circulation holes will be
provided on request.
Make up the impression

block to the bottom of the fishing
string. Run into hole until impression block is near top of fish.
Slowly lower pipe until making
contact with fish. Do not rotate.
Apply weight to impression block
and then pull out of hole. The
impression made will assist the
operator in determining what
tools are needed to prepare and
retrieve the fish.
Gotco Lead Impression Blocks

OD not over
15/8"
21/4"
23/4"
Length
12
12
12
Gotco Part No.
IB-162
IB-225
IB-275
43/4"
15
IB-475
51/2"
15
IB-550
53/4"
15
IB-575
Gotco Lead Impression Blocks

OD not over
8"
81/2"
11"
Length
19
19
20
Gotco Part No.
IB-800
IB-850
IB-1100
111/2"
20
IB-1150
113/4"
20
IB-1175
12"
20
IB-1200
Impression Block
How to Order Gotco Impression Blocks

Connection.
O.D., if nonstandard.
www.gotco-usa.com
27
Junk Catchers Wireline Spear
Wireline Spear
The Gotco Wireline Spear is a simple easy to use tool designed to
retrieve wire line and wire rope from the well bore.
Construction
Spears are constructed of high

quality steel for strength and durability. The upper end of the tool
has a box connection and fishing
neck. Two types of spears are
available. The standard wireline
spear is provided with welded
barbs. The collapsible wireline
spear has retracting barbs to allow
easier entry into the wire without
compacting it further. Serrations
on the spear shank, inside the collapsible barb cavity, further
enhances the ability of the Gotco
Wireline Spear to retain its grip on
the cable while tripping out.
Make-up the spear to the bottom of the string. Run in the hole.
Upon reaching the wire to be
retrieved, slowly lower the spear,
allowing the steel barbs to engage
the wire. It may be necessary to
lift and lower several times to be
sure the spear has sufficiently
engaged the wire. Slight rotation
may also be required to loosen the
wire if it is severely compacted.
The spear may then be lifted from
the hole, bringing the loose wire
with it.
Gotco Wireline Spear

Neck OD
Total Length
Standard Connection
Standard Type
Part No.
Collapsible Type
Part No.
31/8
6
23/8 Reg
WS-312
CWS-312
33/4
6
27/8 Reg
WS-375
CWS-375
41/4
6
31/2 Reg
WS-425
CWS-425
51/2
8
41/2 Reg
WS-550
CWS-550
Gotco Wireline Spear

Neck OD
Total Length
Standard Connection
Standard Type
Part No.
Collapsible Type
Part No.
61/4
8
41/2 IF
WS-625
CWS-625
63/4
8
51/2 Reg
WS-675
CWS-675
73/4
10
65/8 Reg
WS-775
CWS-775
87/8
10
75/8 Reg
WS-887
CWS-887
How to Order Gotco Wireline Spears

Collapsible
Wireline
Spear
Wireline Spear
28
www.gotco-usa.com
Fishing Jar
Fishing Jar
The Gotco Hydraulic Fishing Jar is an easy-to-use accessory tool
that assists in various operations such as fishing, testing, coring,
reaming, and washover. Designed to be installed in the string
above the fishing tool assembly, it allows the operator to deliver
an upward blow to the equipment installed in the string below the
jar. This is particularly helpful when the string is stuck or restricted and cannot be lifted only by pulling.
Construction
Fishing jars are constructed

from high-strength, impact-resistant alloy. Specially heat treated to
provide the ultimate in toughness
and durability, this field proven
tool is simple and easy to operate.
For fishing operations the jar

should be installed below a string
of drill collars. (For other applications, see technical manual.)
Lower the string and engage the
fish. Once engaged, simply pull
upward, stretching the drill string.
Gotco Fishing Jars

Connection Size
23/8 API Reg
Outside Diameter 31/8"
Inside Diameter
1"
Free Stroke
43/8"
Type Jar
Int Mand
Gotco Part No.
FJ-31
XRef No.
52504
27/8 API Reg

33/4"
11/4"
41/8"
Int Mand
FJ-136
52506
23/8 API IF
33/4"
11/2"
315/16"
Sub
FJ-36
52528
23/8 EUE
33/4"
17/8"
313/16"
Sub
FJ-236
52497
27/8 API IF
41/4"
115/16"
43/16"
Int Mand
FJ-42
52502
Gotco Fishing Jars

Connection Size
27/8 EUE
Inside Diameter
23/8"
Free Stroke
53/16"
Type Jar
Int Mand
Gotco Part No.
FJ-44
XRef No.
52653
31/2 API FH
43/4"
11/2"
47/16"
Int Mand
FJ-146
52530
31/2 API IF
43/4"
2"
51/16"
Int Mand
FJ-46
52500
41/2 FH
6"
2"
45/16"
Int Mand
FJ-60
52498
41/2 IF
61/4"
21/4"
61/2"
Int Mand
FJ-62
52544
Gotco Fishing Jars

Connection Size
51/2 Reg
Inside Diameter
23/8"
Free Stroke
61/2"
Type Jar
Int Mand
Gotco Part No.
FJ-66
XRef No.
52680
65/8 Reg
73/4"
31/16"
61/2"
Int Mand
FJ-76
52711
65/8 Reg
8
31/16"
61/2"
Int Mand
FJ-800
52711
75/8 Reg
9"
33/4"
61/2"
Int Mand
FJ-90
66346
How to Order Gotco Fishing Jars

Size and type of connection, if nonstandard.
Accessory Tools
The jar will begin to open slowly

as the piston meters the hydraulic
fluid in the jar. Once the jar has
opened approximately half of its
full stroke, the piston will release
and the jar will suddenly open
fully, releasing the energy stored
in the stretched drill string, delivering the desired impact. The
amount of impact is determined
by the amount of stretch applied
to the string. This provides the
operator with complete control
over the impact applied. No
adjustments to the tool are
required. Once the jar has been
tripped it can be quickly reset by
lowering the string and allowing
the jar to close. Heavy-duty
splines allow for full torque transmission at any time. For maximum effectiveness, also use a jar
impact amplifier.
Recommended Spares
(1)
(2)
(3)
(4)
1 Service Kit
1 Washpipe
2 Piston Assemblies
16 Non-Extrusion
Rings
(5) 16 Seal Protector Rings
(6) 4 Mandrel Body
Fill Plugs
(7) 4 Middle Body
Fill Plugs
(8) 8 Packing Sets
(9) 1 Mandrel Body
Setting Tool
(10) 1 Piston Setting Tool
www.gotco-usa.com
Fishing Jar
29
Accessory Tools Bumper Sub
Bumper Sub
The Gotco Fishing Bumper Sub is a highly dependable accessory
tool. Suitable for all fishing operations, it has proven to be especially successful in surviving harsh down-hole applications. The
tool design allows full torque and unrestricted fluid circulation at
all times. Standard stroke is 20 inches; other stroke lengths are
available on request. Typical operations include releasing stuck
drill pipe, drill collars, tubing, test tools, and safety joints. Also,
the fishing bumper sub functions well when used with an overshot or spear.
Construction
The fishing bumper sub is
constructed from specially heat
treated high-strength alloy steel to
withstand severe stress resulting
from tension, jarring, and torque.
A double-seal piston assures full
circulation through the tool during fishing operations.
Bumper Sub
30

installed in the fishing string
immediately above the fishing
tool or safety joint. To apply a
sharp downward blow, mark the
pipe at surface to indicate open
and closed positions of bumper
sub. Raise fishing string to open
bumper sub and allow for some
additional pipe stretch. Drop
string sharply and stop with the
brake approximately 4 to 6 inches
above the closed position of
bumper sub. As the fishing string
springs downward, the bumper
sub will deliver a sharp downward blow. To apply a solid downward blow, raise fishing string to
open bumper sub plus exert a
slight stretch in string. Drop full
weight of pipe without braking to
deliver a strong downward blow.
To apply an upward blow,
mark pipe at surface to indicate
open and closed positions of
bumper sub. Raise fishing string
to open bumper sub plus exert
moderate strength in string. Drop
string by the amount of pipe
stretch only and catch it with the
brake. As pipe recoils at the bottom of the hole, the bumper sub
will deliver a sharp upward blow.
Gotco Fishing Bumper Sub

Connection Size, in. 113/16 WFJ 1 EUE TBG
Outside Diam. in.
113/16
129/32
3
3/8
Inside Diam. in.
/8
Stroke, in.
20
20
Gotco Part No.
BSK-5
BSK-10
11/4 Reg
21/4
1/2
20
BSK-15
23/8 WFJ
21/2
1/2
20
BSK-20
23/8 EUE
31/8
117/32
20
BSK-25

Connection Size, in. 23/8 Reg
23/8 IF
Outside Diam. in.
31/8
33/8
Inside Diam. in.
1
1
Stroke, in.
20
20
Gotco Part No.
BSK-30
BSK-34
23/8 IF
33/4
11/2
20
BSK-36
27/8 Reg
33/4
11/4
20
BSK-40
23/8 Eue
33/4
17/8
20
BSK-41

Connection Size, in. 27/8 IF
27/8 EUE
Outside Diam. in.
41/8
41/2
Inside Diam. in.
11/2
23/8
Stroke, in.
20
20
Gotco Part No.
BSK-42
BSK-44
27/8 IF
41/4
115/16
20
BSK-46
31/2 Reg
41/4
11/2
20
BSK-47
31/2 FH
45/8
17/8
20
BSK-49

Connection Size, in. 31/2 FH
31/2 IF
5
Outside Diam. in.
4 /8
43/4
Inside Diam. in.
2
11/2
Stroke, in.
20
20
Gotco Part No.
BSK-50
BSK-54
31/2 IF
43/4
2
20
BSK-56
41/2 Reg
51/2
2
20
BSK-66
41/2 FH
53/4
2
20
BSK-69

Connection Size, in. 41/2 FH
41/2 IF
Outside Diam. in.
6
61/8
Inside Diam. in.
2
21/4
Stroke, in.
20
20
Gotco Part No.
BSK-600
BSK-74
41/2 IF
61/4
21/4
20
BSK-75
51/2 Reg
63/4
23/4
20
BSK-85
65/8 Reg
73/4
31/2
20
BSK-101

Connection Size, in. 65/8 Reg
75/8 Reg
Outside Diam. in.
8
9
Inside Diam. in.
31/2
4
Stroke, in.
20
20
Gotco Part No.
BSK-102
BSK-105
How to Order Gotco Bumper Sub

Stroke length, if nonstandard.
Standard Components
composed of five major parts: the
mandrel, kelly sub, piston, barrel,
and top sub. The mandrel
includes a hex kelly that is
engaged by the kelly sub to transmit torque. The barrel has a preci-
www.gotco-usa.com
sion honed I.D. to assure a positive seal with the piston.
Optional Components
and Accessories
Stroke lengths up to 60 inches are available upon customers
request.
Jar Impact Amplifier

The Gotco Jar Impact Amplifier is a vital accessory tool
designed to be run with the Gotco Hydraulic Fishing Jar. It will
accelerate the upward motion of the drill collars and the fishing
jar allowing the operator to apply significantly greater impact to
the fish. This is particularly helpful in deviated holes where friction may reduce the impact of the jar or in shallow holes where
there is insufficient string length to provide adequate stretch to
the running string. Acting also as a shock absorber to the
rebounding string, the jar impact amplifier will protect tools and
string from damage.
Gotco Jar Impact Amplifier (for Hydraulic Jars)

Connection Size
23/8 Reg
23/8 IF
23/8 EUE
27/8 Reg
1
3
3
Outside Diameter 3 /8"
3 /4"
3 /4"
33/4"
1
7
Inside Diameter
1"
1 /2"
1 /8"
11/4"
3
7
5
Total Stroke
8 /4
7 /8
7 /8
81/4
Jar Used With
FJ-31
FJ-36
FJ-236
FJ-136
52204
52528
52497
52506
Gotco Part No.
AMP-31
AMP-36
AMP-236 AMP-136
XRef No.
55867
55747
50660
55895
27/8 IF
41/4"
115/16"
85/8
FJ-42
52502
AMP-42
55664

Connection Size
27/8 EUE
31/2 FH
31/2 IF
41/2 FH
43/4"
43/4"
6"
Inside Diameter
23/8"
11/2"
2"
2"
Total Stroke
103/5
87/8
101/8
85/8
Jar Used With
FJ-44
FJ-146
FJ-46
FJ-60
52653
52530
52500
52498
Gotco Part No.
AMP-44
AMP-146 AMP-46
AMP-60
XRef No.
50708
50700
55812
55860
41/2 IF
61/4"
21/4"
13
FJ-62
52544
AMP-62
55905

Connection Size
51/2 Reg
65/8 Reg
65/8 Reg
75/8 Reg
73/4"
8
9"
Inside Diameter
23/8"
31/16"
31/16"
33/4"
Total Stroke
13
13
13
13
Jar Used With
FJ-66
FJ-76
FJ-800
FJ-90
52680
52711
52711
66346
Gotco Part No.
AMP-66
AMP-76
AMP-800 AMP-90
XRef No.
50720
55910
55910
66372
Accessory Tools
Construction
Manufactured from high
strength alloy and heat treated for
maximum toughness, the jar
impact amplifier is both rugged
and reliable. Heavy splines allow
the application of full torque and a
generous through bore offers unrestricted circulation at all times.
Operation
The jar impact amplifier
should be located in the string
immediately above the drill collars. No presetting is required.
When a stretch is applied to the
string, the jar impact amplifier
fluids are compressed, storing
additional energy. When the jar
trips, this energy is released. The
tool will automatically reset, each
time the jar trips, and will continue to operate as many times as
necessary to free the fish.
Service Kit
A service kit is required to
properly redress and fill the
hydraulic jar. One kit will service
all Gotco Jars and Jar Impact
Amplifiers.
Setting Tools
A mandrel body setting tool
is required for each size of jar
impact amplifier. Setting tools are
used to properly position and set
the standard copper back-up and
non-extrusion rings.
Recommended Spares
How to Order Gotco Jar Impact Amplifier

Size and type of connection, if nonstandard.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
www.gotco-usa.com
1 Service Kit
1 Washpipe
2 Piston Assemblies
16 Non-Extrusion
Rings
16 Seal Protector Rings
4 Mandrel Body
Fill Plugs
4 Middle Body
Fill Plugs
8 Packing Sets
1 Mandrel Body
Setting Tool
31
Accessory Tools Lubricated Bumper Sub
Lubricated
Bumper Sub
The Gotco Lubricated Fishing Bumper Sub is designed to withstand repetitive and sustained loads in severe fishing, drilling and
well workover operations. The tool can be stroked upward or
downward. The average stroke is between 10 and 18. Longer
strokes can be furnished upon request.
Construction
Mandrel
Seal Kit
Fill Plug
The Gotco Lubricated

Bumper Sub is manufactured
from high-grade alloy steel.
The tool is engineered to
reduce high degrees of stress
concentration in critical areas
of the tool. This promotes
longer service life and a better
quality tool.

Mandrel
Body
Middle
Body
Knocker
The Gotco Lubricated

Bumper Sub is normally
installed in the fishing string

just above the fishing tool,
safety joint or unlatching joint.
Heavy-duty splines allows
for transmitting full torque at
all times during operation.
Striking surfaces are provided
at the limits of the free stroke
movement to produce the
impact necessary for achieving the greatest intensity of
bumping action in either
direction. The primary function of the Lubricated Bumper
Sub is to enable the operator to
release the fishing tool in the
event that it becomes impossible to pull the fish. It will provide the necessary impact and
deliver the torque required to
release the tool from the fish.
The Lubricated Bumper
Sub can also be used to release
the recovered fish at the top of
Gotco Lubricated Bumper Subs

Connection Size
23/8 I.F.
31/2 I.F.
Outside Diameter
33/4
43/4
Inside Diameter
11/2
2
Total Stroke
151/2
151/2
Gotco Part No.
LBS-36
LBS-46
XRef. No.
43470
39727
41/2 I.F.
61/4
31/8
18
LBS-62
39737
The Lubricated Bumper

Sub is composed of six major
parts: the Mandrel, Knocker,
Washpipe, Middle Body,
Mandrel Body and Washpipe
Body. The critical seal points
of the Mandrel and Washpipe
are equipped with a seal-ring
assembly consisting of an Oring, Non-Extrusion Ring and
Seal Protector Ring. This Seal
Ring set keeps the diametrical
clearance at the seal points to
an absolute minimum as
hydraulic pressure is applied
from either direction in the
tool. This greatly increases the
life of the O-Ring and seal set
by prohibiting O-Ring extrusion.
Recommended Spares:
Other sizes available upon request.
(1) 1 Service Kit

(2) 6 Seal Packing Sets
(3) 4 Middle Body Fill Plugs
Washpipe
Knocker
(4) 4 Mandrel Body Fill Plugs

(5) 16 Main Mandrel NonHow to Order Gotco Lubricated Bumper
Subs

Size and type of connection if other than standard.
Outside diameter, if other than standard.
Lubricated
Bumper Sub
32
Standard Components
65/8 Reg.
73/4
31/2
18
LBS-76
39752
Fill Plug
Washpipe
Body
the hole, or be used to Jar

Up or Bump Down in the
hole.
www.gotco-usa.com
Extrusion Rings
(6) 16 Main Mandrel Seal Protector
Rings
(7) 1 Seal Ring Setting Tool
Drilling Safety Joints
Drilling Safety Joint

The Gotco Safety Joint is manufactured to provide safe and easy
release and make-up whenever disengagement becomes necessary. This dependable, field-tough tool is designed to transmit
torque in either direction when placed in the drill, fishing, or
washover string.
Components
The safety joint consists of a

pin section, a box section, and a
friction ring. The internal connection of the safety joint is a coarse
acme thread used to facilitate
easy pack-off and re-engagement.
A knurled release ring between
the box and pin sections maintain
torsion integrity until back-off
procedure is initiated. An O-ring
seal contains pressure while the
safety joint is made up.
To assemble, install the safety

joint in the drill string as indicated
below. Make up the service connection to a torque of approximately 60 to 75% of the drill
string connections.
In drill strings, the safety joint
should be located above the drill
collars to avoid compression.
In fishing strings, the safety
joint should be located directly
above the fishing tool but below
Accessory Tools
the jar or bumper sub.

In washover strings, the safety
joint should be located between
the drill pipe and the washover
pipe. Gotco Washover Safety
Joints are provided with a tool
joint box thread and a washover
pipe pin thread.
To disengage the safety joint
while down-hole, place pipe in
tension and apply left-hand
torque. Hold torque while slowly
lowering pipe until safety joint
breaks. Continue to unscrew safety joint to the left. To re-engage
the safety joint, lower pipe until
pin section of safety joint lands
on box section. Apply one point
of weight. Rotate to the left one or
two turns. Then rotate to the right
until torque builds up, indicating
Drilling Safety Joint
How to Order Gotco Safety Joints

Connection.
O.D. and I.D. , if nonstandard.
Gotco Drilling Safety Joints

Connection
23/8 EUE
Tool OD
31/16
Tool ID
13/4
Gotco Part No.
DSJ-306
23/8 REG
31/8
1
DSJ-312
23/8 IF
33/8
13/4
DSJ-337
27/8 EUE
321/32
27/16
DSJ-365
27/8 REG
33/4
11/4
DSJ-375
27/8 IF
41/8
21/8
DSJ-412
31/2 REG
41/4
11/2
DSJ-425
31/2 FH
41/2
21/16
DSJ-450

Connection
31/2 FH
Tool OD
45/8
Tool ID
27/16
Gotco Part No.
DSJ-462
31/2 IF
43/4
211/16
DSJ-475
31/2 IF
5
211/16
DSJ-500
4 IF
53/4
31/4
DSJ-575
41/2 IF
61/8
33/4
DSJ-612
41/2 IF
61/4
33/4
DSJ-625
41/2 IF
61/2
33/4
DSJ-650
51/2 REG
63/4
23/4
DSJ-675

Connection
51/2 FH
Tool OD
7
Tool ID
4
Gotco Part No.
DSJ-700
65/8 REG
73/4
31/2
DSJ-775
65/8 REG
8
31/2
DSJ-800
65/8 REG
81/4
31/2
DSJ-825
65/8 IF
81/2
529/32
DSJ-850
75/8 IF
9
4
DSJ-900
75/8 Reg
91/4
4
DSJ-925
85/8 Reg
10
43/4
DSJ-1000
www.gotco-usa.com
33
Milling Junk Mills
Skirted Junk Mills
Junk Mills
Gotco junk mills are produced for high strength heat treated
alloy. All mills are available as bit type or with optional fishing
neck and hard surface wear pads. Large circulation ports and
ample fluid channels provide cooling and efficient removal of
cuttings. Gotco mills are available dressed with super tough
Gotcoloy (crushed, sintered tungsten carbide.) For those customers who prefer to dress their own mill, Gotco offers a complete line of mills without carbide dressing at a substantial savings. To further increase the versatility of Gotco mills, the API
connection can be left blank as well. Gotco mills are available in
standard sizes as well as special orders in any length or diameter.
Junk Mills
Rugged Gotco junk mills
make milling jobs easy even when
cutting the toughest fish such as
alloy-steel packers, squeeze tools,
perforating guns, drill pipe, tool
joints, reamers, reamer blades, and
rock bits. Gotco junk mills are
available with concave, convex, or
flat bottoms in various combina-
Flat Bottom
Junk Mill
34
tions of fishing necks and stabilizers. Any specific length neck, stabilizer, or combination of both
may also be ordered. Available in
O.D.s from 13/4 to 181/2 inches with
4 to 8 blades in 10 to 64 inch
lengths with bladed, concave, flat
bottom, or offset design. Gotco
junk mills are also offered with a
skirt as an option.
Concave
Junk Mill
The Gotco Skirted Mill is a

three piece assembly used to mill
junk or tubular inside casing. The
assembly consists of a top sub,
skirt, and flat bottom junk mill.
An optional bladed type junk mill
is also available. The mill and
skirt are both made up to the
lower end of the top sub. The skirt
surrounds the mill and extends
suitably beyond the mill face to
act as a guide and centralizes the
junk to be milled. The skirt has
hard metal ribs to increase wear
resistance but does not contain
any carbide which could damage
the casing. The carbide dressing
on the mill face will assure fast
efficient milling while the skirt
protects the casing from the
milling operation.
Skirted
Junk Mill
Offset
Junk Mill
www.gotco-usa.com
Bladed
Junk Mill
Junk Mills
Pilot Mills
Gotco Pilot Mills are commonly used to mill casing, liners,
washover pipe, drill pipe, and tubing. The pilot mill is available in a
standard configuration or can be
designed to customer specifications. For extra long mill runs, the
blade length may be increased to
almost any desired length. For
those who wish to dress their own
mills, these mills are available
without dressing at a considerable
savings to the customer.
Combination Mills
The Gotco Combination Mill
is used to mill cement and small
junk items. Some applications
include the milling of bridge
plugs, under-reamer arms, reamer
blades, slips and other small items
that are lost in the well. The large
relief angle allows for superior
Standard
Pilot Mill
Milling
penetration. The predominant feature of this mill is that one mill

tooth extends to the center of the
mill in order to prevent coring.
Taper Mills
The Gotco Taper Mill is used
to establish gage diameter. It is
used primarily to mill collapsed
casing. It may also be used in
conjunction with other mills to
prepare a fish for internal engagement. Another useful application
is deburring the window after a
whipstock operation is completed. Tapered mills come in three
common configurations. The 60
degree mill has an included taper
of 60 degrees (30 degrees per
side.) The 30 degree mill has an
included taper of 30 degrees (15
degrees per side.) The 15 degree
mill has an included taper of 15
degrees (71/2 degrees per side.)
Round
Nose Mill
How to Order Gotco Junk Mills

O.D. of mill.
Top connection.
Bottom configuration.
Style of dressing.
Mills can be ordered with fishing neck and wear pads on request.
How to Order Gotco Pilot Mills

O.D. of mill.
Top connection.
Pilot diameter.
Style of dressing.
Combination Mill
Taper Mill
www.gotco-usa.com
35
Milling Junk Mills
Gotco Milling Tools

Mill Size (OD)
Top Conn.-Pin
Gotco Junk Mill1 Part No.
Gotco Round Nose Mill Part No.
Gotco Taper Mill Part No.
Gotco Skirted Junk Mill Part No.
Gotco Pilot Mill Part No.
Fishing Neck O.D.
21/4 - 21/2
113/16
JM-1
JMB-1
RM-1
25/8 - 23/4
11/4
JM-2
JMB-2
RM-2
27/8 - 31/8
11/4
JM-3
JMB-3
RM-3
31/4 - 35/8
23/8
JM-4
JMB-4
RM-4
PM-3
PM-4
43/8 - 41/2
27/8
JM-6
JMB-6
RM-6
TM-6
SJM-6
PM-6
33/4
45/8 - 43/4
27/8
JM-7
JMB-7
RM-7
TM-7
SJM-7
PM-7
33/4
47/8 - 5
27/8
JM-8
JMB-8
RM-8
TM-8
SJM-8
PM-8
33/4
51/8 - 51/4
31/2
JM-9
JMB-9
RM-9
TM-9
SJM-9
PM-9
41/4
53/8 - 51/2
31/2
JM-10
JMB-10
RM-10
TM-10
SJM-10
PM-10
41/4
55/8 - 53/4
31/2
JM-11
JMB-11
RM-11
TM-11
SJM-11
PM-11
41/4
Gotco Milling Tools

Mill Size (OD)
Top Conn.-Pin
Fishing Neck O.D.
57/8 - 6
31/2
JM-12
JMB-12
RM-12
TM-12
SJM-12
PM-12
41/4
61/8 - 61/4
31/2
JM-13
JMB-13
RM-13
TM-13
SJM-13
PM-13
41/4
63/8 - 61/2
31/2
JM-14
JMB-14
RM-14
TM-14
SJM-14
PM-14
41/4
65/8 - 63/4
31/2
JM-15
JMB-15
RM-15
TM-15
SJM-15
PM-15
41/4
67/8 - 7
31/2
JM-16
JMB-16
RM-16
TM-16
SJM-16
PM-16
41/4
71/8 - 71/4
31/2
JM-17
JMB-17
RM-17
TM-17
SJM-17
PM-17
41/4
73/8 - 71/2
41/2
JM-18
JMB-18
RM-18
TM-18
SJM-18
PM-18
53/4
75/8 - 73/4
41/2
JM-19
JMB-19
RM-19
TM-19
SJM-19
PM-19
53/4
77/8 - 8
41/2
JM-20
JMB-20
RM-20
TM-20
SJM-20
PM-20
53/4
81/8 - 81/4
41/2
JM-21
JMB-21
RM-21
TM-21
SJM-21
PM-21
53/4
83/8 - 81/2
41/2
JM-22
JMB-22
RM-22
TM-22
SJM-22
PM-22
53/4
Gotco Milling Tools

Mill Size (OD)
Top Conn.-Pin
Fishing Neck O.D.
85/8 - 83/4
41/2
JM-23
JMB-23
RM-23
TM-23
SJM-23
PM-23
53/4
87/8 - 9
41/2
JM-24
JMB-24
RM-24
TM-24
SJM-24
PM-24
53/4
91/8 - 91/4
41/2
JM-25
JMB-25
RM-25
TM-25
SJM-25
PM-25
53/4
93/8 - 91/2
41/2
JM-26
JMB-26
RM-26
TM-26
SJM-26
PM-26
53/4
95/8 - 93/4
65/8
JM-27
JMB-27
RM-27
TM-27
SJM-27
PM-27
73/4
97/8 - 10
65/8
JM-28
JMB-28
RM-28
TM-28
SJM-28
PM-28
73/4
101/8 - 101/4
65/8
JM-29
JMB-29
RM-29
TM-29
SJM-29
PM-29
73/4
103/8 - 101/2
65/8
JM-30
JMB-30
RM-30
TM-30
SJM-30
PM-30
73/4
105/8 - 103/4
65/8
JM-31
JMB-31
RM-31
TM-31
SJM-31
PM-31
73/4
107/8 - 11
65/8
JM-32
JMB-32
RM-32
TM-32
SJM-32
PM-32
73/4
111/8 - 111/4
65/8
JM-33
JMB-33
RM-33
TM-33
SJM-33
PM-33
73/4
123/8 - 121/2
65/8
JM-38
JMB-38
RM-38
TM-38
SJM-38
PM-38
73/4
125/8 - 131/2
65/8
JM-39
JMB-39
RM-39
TM-39
SJM-39
PM-39
73/4
135/8 - 141/2
75/8
JM-40
JMB-40
RM-40
TM-40
SJM-40
PM-40
87/8
145/8 - 151/2
75/8
JM-41
JMB-41
RM-41
TM-41
SJM-41
PM-41
87/8
155/8 - 161/2
75/8
JM-42
JMB-42
RM-42
TM-42
SJM-42
PM-42
87/8
165/8 - 171/2
85/8
JM-43
JMB-43
RM-43
TM-43
SJM-43
PM-43
10
175/8 - 181/2
85/8
JM-44
JMB-44
RM-44
TM-44
SJM-44
PM-44
10
Gotco Milling Tools

Mill Size (OD)
113/8 - 111/2
Top Conn.-Pin
65/8
JM-34
JMB-34
Gotco Round Nose Mill Part No. RM-34
TM-34
Gotco Skirted Junk Mill Part No. SJM-34
PM-34
Fishing Neck O.D.
73/4
1
Flat Bottom, Concave or offset
115/8 - 113/4 117/8 - 12

121/8 - 121/4
65/8
65/8
65/8
JM-35
JM-36
JM-37
JMB-35
JMB-36
JMB-37
RM-35
RM-36
RM-37
TM-35
TM-36
TM-37
SJM-35
SJM-36
SJM-37
PM-35
PM-36
PM-37
73/4
73/4
73/4
2
Standard Bladed or Combination
How to Order Gotco Taper Mills
How to Order Gotco Combination Mills

O.D. of mill.
Top connection.
Style of dressing.
36
33/4 - 41/4
23/8
JM-5
JMB-5
RM-5
TM-5
SJM-5
PM-5
31/8

O.D. of mill.
Top connection.
Taper range.
Style of dressing.
www.gotco-usa.com
Boot Basket (Junk Sub)
Boot Basket
(Junk Sub)
The Gotco Boot Basket (Junk Sub) is an accessory tool used in
milling or drilling operations. It is designed to prevent cuttings
that are too heavy to be circulated from settling to the bottom of
the hole.
Construction
Boot baskets are manufactured from high-strength heat
treated alloy steel to withstand
wear. Heavy-duty ribs are
attached to the cup to prevent it
from being crushed and to guide
the tool through tight places while
tripping out of the hole. These
ribs are not welded to the main
body of the tool, further enhancing its strength.

Boot baskets are used directly
above the mill or drill bit. On
severe milling jobs, it is customary to run two or three baskets in
tandem above the mill. This tandem running not only increases
the capacity to remove the cuttings, but also provides extra stabilization for the mill. Boot baskets can be run in either open hole
or inside casing. When the basket
is working inside a casing, hardfaced pads, dressed to the same
O.D. as the mill or bit, should be
used.
Optional Components
and Accessories
Boot Basket
(Junk Sub)
The standard boot basket is a

welded assembly with a 10 inch
deep cup. Long and extra long
baskets are available; these provide a 20 or 30 inch deep cup.
Gotco Boot Basket (Junk Sub)

Hole Size
41/4 - 45/8 45/8 - 47/8
API Connection
23/8
27/8
1
Body OD (Top Conn.)
3 /8
33/4
Body OD (Under Cup)
2
25/8
11
Cup OD
3 /16
4
Cup ID
35/8
35/8
3/4
Diam. of Bore
11/4
Standard-Type Boot Basket
Gotco Assembly Part No. BB-1
BB-2
XRef. No. 20340
15450
Length of Cup
10
10
Total Length
29
291/2
Long-Type Boot Basket
Gotco Assembly Part No. BBL-1
BBL-2
XRef. No. 20345
17060
Length of Cup
20
20
Total Length
431/2
44
Extra-Long-Type Boot Basket
Gotco Assembly Part No. BBXL-1 BBXL-2
XRef. No. 20295
20300
Length of Cup
30
30
Total Length
531/2
54
Gotco Boot Basket (Junk Sub)
Hole Size
71/2-81/2 85/8-95/8
API Connection
41/2
41/2
Body OD (Top Conn.)
51/2
51/2
1
Body OD (Under Cup)
4 /2
41/2
5
Cup OD
6 /8
7
Cup ID
55/16
69/32
1
Diam. of Bore
2 /4
21/4
Standard-Type Boot Basket
Gotco Assembly Part No. BB-6
BB-7
XRef. No. 15470
15475
Length of Cup
10
10
Total Length
311/2
311/2
Long-Type Boot Basket
Gotco Assembly Part No. BBL-6
BBL-7
XRef. No. 17080
17085
Length of Cup
20
20
Total Length
46
46
Extra-Long-Type Boot Basket
Gotco Assembly Part No. BBXL-6 BBXL-7
XRef. No. 20320
20325
Length of Cup
30
30
Total Length
56
56
Milling
51/8 - 57/8
31/2
41/4
31/8
41/2
41/4
11/2
6 - 63/8
31/2
41/4
31/4
5
49/16
11/2
61/2 - 71/2
31/2
41/4
31/4
51/2
47/8
11/2
BB-3
15455
10
301/2
BB-4
15460
10
301/2
BB-5
15465
10
301/2
BBL-3
17065
20
45
BBL-4
17070
20
45
BBL-5
17075
20
45
BBXL-3
20305
30
55
BBXL-4
20310
30
55
BBXL-5
20315
30
55
95/8-113/8
65/8
73/4
53/4
85/8
715/16
31/2
111/2-13
65/8
73/4
53/4
95/8
817/32
31/2
143/4-171/2
75/8
87/8
75/8
127/8
115/8
4
BB-8
15480
10
33
BB-9
15485
10
33
BB-10
55306
10
36
BBL-8
17090
20
48
BBL-9
17095
20
48
BBL-10
BBXL-8
20330
30
58
BBXL-9
20335
30
58
BBXL-10
20
50
30
60
How to Order Gotco Boot Basket (Junk Sub)

Name and part of assembly number.
Special sizes are available upon customers request.
www.gotco-usa.com
37
Milling Washover Equipment
Washover Equipment
Washover Pipe Washover Safety Joint Lift Plugs
Drive Subs Rotary Shoes
Gotco Washover Pipe
38
Size
Weight
ID
Wall
31/2
33/4
4
4
4
4
41/2
41/2
43/4
5
5
53/8
51/2
51/2
51/2
51/2
53/4
6
6
61/4
63/8
63/8
65/8
65/8
63/4
7
7
7
73/8
75/8
75/8
75/8
75/8
75/8
8
81/8
81/8
81/8
81/8
87/16
85/8
85/8
85/8
9
93/16
95/16
91/2
95/8
95/8
95/8
95/8
103/4
103/4
103/4
113/4
113/4
133/8
16
9.2
9.5
11.0
11.6
14.0
15.7
13.5
15.1
16.0
15.0
18.0
19.5
17.0
20.0
23.0
26.0
18.0
20.0
23.0
20.0
24.0
28.0
24.0
28.0
35.0
26.0
29.0
32.0
29.0
26.4
29.7
33.7
39.0
45.3
31.0
32.0
32.5
35.5
39.5
35.5
36.0
40.0
44.0
40.0
31.0
38.0
47.0
40.0
43.5
47.0
53.5
45.5
51.0
55.0
54.0
60.0
72.0
109.0
2.992
3.25
3.476
3.428
3.340
3.240
3.920
3.826
4.082
4.408
4.276
4.669
4.892
4.778
4.670
4.548
5.126
5.352
5.240
5.626
5.625
5.499
5.921
5.791
5.710
6.276
6.184
6.094
6.625
6.969
6.875
6.765
6.625
6.435
7.25
7.385
7.375
7.285
7.185
7.626
7.825
7.725
7.625
8.150
8.532
8.535
8.537
8.835
8.755
8.861
8.535
9.950
9.850
9.760
10.880
10.772
12.347
14.688
.254
.250
.262
.286
.330
.380
.290
.337
.334
.296
.362
.353
.304
.361
.415
.476
.312
.324
.380
.312
.375
.438
.352
.417
.520
.362
.408
.453
.375
.328
.375
.430
.500
.595
.375
.370
.375
.420
.470
.406
.400
.450
.500
.425
.326
.389
.483
.395
.435
.472
.545
.400
.450
.495
.435
.489
.514
.656
Yield
Torque
3,000
3,000
3,500
4,000
5,000
6,000
5,000
7,000
7,000
7,000
9,000
10,000
9,000
11,000
13,000
16,000
11,000
12,000
14,000
12,000
16,000
20,000
16,000
29,000
25,000
18,000
21,000
23,000
20,000
20,000
23,000
27,000
32,000
39,000
24,000
24,000
25,000
30,000
35,000
30,000
30,000
35,000
40,000
35,000
26,000
35,000
48,000
40,000
45,000
50,000
60,000
50,000
60,000
65,000
65,000
80,000
110,000
188,000
Min.
Hole Size
31/4
41/8
41/2
41/2
41/2
41/2
43/4
43/4
51/4
53/4
53/4
6
61/8
61/8
61/8
61/8
67/8
7
7
7
7
7
73/8
73/8
71/2
77/8
77/8
77/8
77/8
85/8
85/8
85/8
85/8
81/2
81/2
85/8
85/8
85/8
85/8
91/2
95/8
95/8
95/8
97/8
10
10
10
101/2
101/2
101/2
101/2
113/4
113/4
113/4
123/4
123/4
143/8
171/2
Max.
Fish OD
211/16
31/8
311/32
35/16
31/4
31/16
33/4
311/16
315/16
41/8
41/8
41/2
43/4
45/8
41/2
43/8
5
51/4
51/8
51/2
51/2
53/8
53/4
55/8
51/2
61/8
6
57/8
61/2
67/8
63/4
65/8
61/2
61/4
71/8
71/4
71/4
71/8
71/16
71/2
75/8
711/16
79/16
8
83/8
83/8
83/8
83/4
81/2
85/8
83/8
93/4
95/8
91/2
105/8
101/2
12
143/8
Washover Pipe
Gotco offers one of the
largest selections of washover
tubulars in the industry. All
washover pipe has a two-step,
double-shouldered thread joint
with flush outside and inside
diameters. This buttress-type
thread assures quick make-up and
high torsion strength. A wide
assortment of sizes is available
ranging in outside diameters from
31/2 to 20 inches. Consult the table
for available sizes and washover
string design considerations.
Drive Sub
Washpipe
Washover Shoe
How to Order Gotco Washover Pipe

O.D.
Weight.
Grade.
Range.
www.gotco-usa.com
Washover Equipment
Washover
Safety Joint
Gotco Washover
Safety Joint
Pipe Part No.
Size
31/2 WSJ-350
4
WSJ-400
43/4 WSJ-475
53/8 WSJ-537
53/4 WSJ-575
61/4 WSJ-625
65/8 WSJ-662
7
WSJ-700
75/8 WSJ-762
81/8 WSJ-812
9
WSJ-900
95/16 WSJ-931
95/8 WSJ-962
113/4 WSJ-1175
16
WSJ-1600
Pipe
Size
33/4
41/2
5
51/2
6
63/8
63/4
73/8
8
85/8
93/16
91/2
103/4
133/8
Part No.
WSJ-375
WSJ-450
WSJ-500
WSJ-550
WSJ-600
WSJ-637
WSJ-675
WSJ-737
WSJ-800
WSJ-862
WSJ-918
WSJ-950
WSJ-1075
WSJ-1337
Washover Safety Joint
Lift Plugs
The Gotco Washover Safety

Joint is manufactured to provide
safe and easy release and make-up
whenever disengagement from
the washover string becomes necessary. This dependable, fieldtough tool is designed to transmit
torque in either direction when
placed in the washover string.
Construction The Gotco
Washover Safety Joint consists of
a pin section, a box section, and a
friction ring. The internal connection of the safety joint is a coarse
acme thread used to facilitate
easy pack-off and re-engagement.
A knurled release ring between
the box and pin sections maintains torsion integrity until backoff procedure is initiated. An Oring seal contains pressure while
the safety joint is made up.
Assembly To assemble,
install the safety joint in the drill
string and make up the service
connection to a torque of approximately 60 to 75% of the string
connections.
In washover strings, the safety joint should be located between
the drill pipe and the washover
pipe. Gotco Washover Safety
Joints are provided with a tool
joint box thread up and a
washover pipe pin thread down.
To disengage the safety joint
while down-hole, place pipe in
tension and apply left-hand
torque. Hold torque while slowly
lowering pipe until safety joint
breaks. Continue to unscrew safety joint to the left. To re-engage
the safety joint, lower pipe until
pin section of safety joint lands
on box section. Apply one point
of weight. Rotate to the left one or
two turns. Then rotate to the right
until torque builds up, indicating
Gotco Lift Plugs are designed

to provide an economical method
of handling washover strings.
They are available in all thread
types and sizes, have sufficient
shoulder diameter to support handling the washover string, and can
be ordered with or without lifting
bail.
Elevator Lift Subs Gotco
Elevator Lift Subs are used to
handle the washover string and
have an upper shoulder as well as
reduced neck for securing in the
elevator.
Milling
Lift Plug
Lift Plug with Bail
Gotco Lift Plugs

Washpipe
41/2
Plain Length
6
With Bail Length
12
Plain Lift Plug Part No. LP-44
Lift Plug with Bail Part No.LPB-44
Shoulder F.J.W.P
5
Maximum I.D.
37/8
43/4
6
121/2
LP-46
LPB-46
53/8
4
5
6
13
LP-5
LPB-5
59/16
4
51/2
6
131/2
LP-54
LPB-54
61/8
45/8
53/4
6
133/4
LP-56
LPB-56
61/2
47/8
6
6
14
LP-6
LPB-6
65/8
51/8
Gotco Lift Plugs

Washpipe
65/8
Plain Length
6
With Bail Length
141/2
Shoulder F.J.W.P
77/16
Maximum I.D.
55/8
7
6
1413/16
LP-7
LPB-7
8
6
75/8
6
17
LP-75
LPB-75
85/8
65/8
81/8
6
18
LP-81
LPB-81
93/32
71/8
85/8
7
19
LP-85
LPB-85
95/8
75/8
9
7
191/2
LP-9
LPB-9
10
8
Gotco Lift Plugs

Washpipe
95/8
Plain Length
7
With Bail Length
20
Shoulder F.J.W.P
105/8
Maximum I.D.
85/8
103/4
7
21
LP-106
LPB-106
113/4
95/8
113/4
133/8
7
21
LP-116 LP-133
LPB-116 LPB-133
123/4
How to Order Gotco Washover Safety Joints
How to Order Gotco Lift Plugs

Connections.
O.D. and I.D., if nonstandard.

Lower pin connection (washover pipe O.D.
and weight).
With or without lifting bail.
www.gotco-usa.com
39
Milling Washover Equipment
Drive Sub
Drive Subs
Rotary Shoes
Gotco Drive Subs provide

the crossover connection between
the drill pipe string and the
washover string. Each is machined
from high-grade alloy steel and
heat treated to provide maximum
strength and durability.
Construction Drive subs
are provided with a box connection up, cut to customer specifications, for make-up with the fishing string. A pin connection
down is also cut to customer
specification and will match the
washover string connections. A
fishing neck is provided for ease
of handling. A long type drive
sub with extra long fishing neck
is also available.
Gotco Rotary Shoes are manufactured from specially heat

treated alloy to provide the ultimate in toughness and durability.
They are used to cut a clearance
between the fish and the wall of
the well bore. Each shoe is
designed to fit a particular downhole need and is run on the bottom of the washover string. Shoe
design is dictated by whether it
cuts on the bottom, on the O.D.,
on the I.D., or on any combination of these. When hole size permits, additional clearances can be
cut by using side ribs to enable
greater circulation.
Gotco Drive Subs

Washpipe Size
Gotco Part No.
XRef No.
Short Type Length, in.
Long Type Length, in.
41/2
DS-44
16330
16
46
43/4
DS-46
16331
16
46
5
DS-5
16332
16
46
51/2
DS-54
16333
16
46
53/4
DS-56
16334
18
46
6
DS-6
16335
18
46
Gotco Drive Subs

Washpipe Size
Gotco Part No.
XRef No.
65/8
DS-65
16336
18
46
7
DS-7
16337
19
48
75/8
DS-75
16338
19
48
81/8
DS-81
16339
19
48
85/8
DS-85
16340
20
50
9
DS-9
16341
20
50
Gotco Drive Subs

Washpipe Size
Gotco Part No.
XRef No.
95/8
DS-95
16342
20
50
103/4
DS-106
16343
20
54
113/4
DS-116
49673
20
133/8
DS-133
49674
How to Order Gotco Drive Subs
When ordering , please specify:

Top (box) connection.
Lower pin connection (washover pipe O.D.
and weight).
Length, if nonstandard.
40
Two basic types are available.

The tooth-type shoe (Type A) is
utilized when the bulk of the
work entails removing formation
to free a drill string. The toothtype shoe is also used to washover
stuck drill collars, drill pipe, and
tubing whenever the fish does not
require milling. The burning-type
shoe (Type B), dressed with
Gotcoloy sintered tungsten carbide, cuts blades from stabilizers,
mills subs to a smaller diameter
for overshot catch, mills out a collapsed section of pipe, mills cutters off of roller-type reamers, and
breaks up junk lodged in the bottom of the hole.
Gotco Rotary Shoe Blanks

No. of Teeth
6
FJWP Connection
4
Std. O.D. of Body, in.
4
Min. I.D. of Body, in.
31/4
Length, in.
16
Weight, lb.
18
Tooth Type, Part No.
RST-40
Wavy/Flat Bottom Part No. RSW-40
6
41/2
41/2
33/4
16
20
RST-44
RSW-44
6
43/4
43/4
41/16
16
28
RST-46
RSW-46
6
5
5
43/16
16
23
RST-50
RSW-50
6
51/2
51/2
45/8
16
30
RST-54
RSW-54
6
53/4
53/4
5
16
26
RST-56
RSW-56

No. of Teeth
6
FJWP Connection
6
6
53/16
Length, in.
16
Weight, lb.
28
RST-60
6
65/8
65/8
511/16
16
41
RST-65
RSW-65
6
7
7
513/16
16
47
RST-70
RSW-70
8
75/8
75/8
65/8
16
47
RST-75
RSW-75
8
81/8
81/8
71/8
16
50
RST-81
RSW-81
8
85/8
85/8
71/2
16
60
RST-85
RSW-85

No. of Teeth
10
FJWP Connection
9
9
713/16
Length, in.
16
Weight, lb.
56
RST-90
10
95/8
95/8
81/2
16
68
RST-95
RSW-95
10
10
10
10
103/4
113/4
133/8
16
103/4
113/4
133/8
16
93/4
103/4
123/8
15
16
16
16
16
68
160
190
190
RST-106 RST-116 RST-136 RST-160
RSW-106 RSW-116 RSW-136 RSW-160
www.gotco-usa.com
Washover Equipment
Milling
Rotary
Shoes
Type A rotary shoe is a drag

type shoe used to cut soft formations and only cuts on the bottom.
Type B rotary shoe is used
inside casings to washover on a
fish without damaging the casing.
It cuts on the bottom only.
Type C rotary shoe is used
inside casing and cuts on the bottom only. It is designed not to
damage the casing or the fish.
Type D rotary shoe is designed to cut formation only. It
only cuts on the O.D. and bottom.
Type E rotary shoe is designed to use inside casing and to
cut metal on a fish. It cuts on the
I.D. and bottom.
Type F rotary shoe is designed to use inside casing and to
cut soft formations as it only cuts
on the bottom.
Type G rotary shoe is designed for use in an open hole and
is used to cut formations, cement,
and metal. It cuts on the O.D.,
I.D., and bottom.
Type M rotary shoe is designed for use in an open hole to
cut formation, cement, and metal
where clearances inside the hole
are limited. It cuts on the O.D. and

bottom.
Type N rotary shoe is designed for use inside casing to
dress and size the fish. It cuts on
the I.D. and bottom.
Type P rotary shoe is designed to cut formations, metal,
and cement. It cuts on the O.D.,
I.D. and bottom.
Type R rotary shoe is designed for use in an open hole to
cut formation, cement, and metal.
It cuts on the O.D. and bottom.
Type S rotary shoe is designed to cut metal in the fish
without damage to the casing. It
cuts on the I.D. and bottom.
Type T rotary shoe is designed for use in an open hole to
cut metal, cement, and formation.
It cuts on the O.D., I.D., and bottom.
Type Z rotary shoe is designed for use inside casing to cut
metal on the fish. It cuts on the
I.D. and bottom.
How to Order Gotco Rotary Shoes

Pipe O.D. and weight
Shoe type
Dressed O.D. and/or I.D. as required
in shoe description
www.gotco-usa.com
41
Remedial and Repair Casing Patch, Lead-Seal Type
Casing Patch,
Lead-Seal Type
The damaged portion of casing must be cut and removed from
the hole. It is important to properly cut and dress the top of the
down-hole casing for effective engagement and pack-off. The top
of the string remaining down-hole must be prepared for engagement. Preparation can include rolling the casing with a Gotco
Casing Roller to assure roundness and proper diameter.
Construction
The casing patch consists of a
bowl, guide, grapple carrier, grapple, grapple control, and seal
assembly. Load bearing components are high strength heat treated alloy steel to ensure string
integrity is maintained. A box
connection on the upper end of
the casing patch will be cut to
customer specifications. The seal
assembly is composed of two
sleeves manufactured from pure,
unalloyed, fully annealed lead.
These lead sleeves will provide

the seal in the patch which joins
the two casing strings. Seal rings
aid in setting the lead seals into
the correct position.

Make up the casing patch to
the bottom of the new casing
string. Be sure to use tongs only
on the upper end of the bowl, near
the top connection. Lower the
tool into the hole. When the fish
is reached, slowly lower the cas-
Gotco Casing Patches, Lead-Seal Type

Casing O.D.
23/8
27/8
4
41/2
Patch O.D.
37/16
4
51/4
53/4
Part No.
LS-23
LS-27
LS-4
LS-4
5
61/4
LS-5
51/2
613/16
LS-54

Casing O.D.
53/4
6
65/8
7
1
5
Patch O.D.
7 /16
7 /16
715/16
83/8
Part No.
LS-56
LS-6
LS-65
LS-7
75/8
9
LS-75
85/8
101/16
LS-85
ing patch while rotating slowly to

the right. Continue until the fish
has passed through the guide and
bottomed out in the grapple carrier. Stop rotation. Slowly pick up
the string to remove any weight or
residual
torque.
Caution:
Backlash could cause the patch to
disengage. The lead seal is set by
raising the string. After the casing
patch has been set into position, it
becomes a permanent part of the
casing string.
The casing patch may be
removed if necessary by bumping
down to release the grip of the grapple. Slowly raise the string while
rotating to the right. Continue until
the patch has cleared the casing.
Lift from the hole.
Options
Packer type, underwater wellhead and cementing type patches
available upon request.
Lead-Seal
Casing Patch

Casing O.D.
95/8
103/4
113/4
133/8
Patch O.D.
111/8
125/16
131/4
151/2
Part No.
LS-95
LS-106 LS-116 LS-133
How to Order Casing Patches

Name and number of assembly or part.
Casing O.D.
Size and type of thread.
Casing Patch,
Packer Type
Gotco Casing Patches, Packer Type with Basket Grapple
Casing O.D.
27/8
31/2
41/2
51/2
7
95/8
Patch O.D.
4
43/4
53/4
613/16
83/8
111/8
Part No.
PCP-287 PCP-350 PCP-450 PCP-550 PCP-700 PCP-962
42
113/4
133/8
PCP-1175
www.gotco-usa.com
Casing Roller
Construction
Casing Roller
The Gotco Casing Roller is a repair tool designed to restore
buckled, collapsed, and dented casing to its original diameter.
Gotco Casing Roller
To Roll Casing Size
23/8 Tub
27/8 Tub
31/2 Tub
Top Connection
Circulation Hole
Individual Roller Length
Gotco Part No.
113/16 WFJ
3/8
3
CR-23
113/16 WFJ
3/8
3
CR-27
11/4 Reg
5/16
3
CR-34
4 & 31/2
LP 4 Tub
11/2 EUE
1/4
4
CR-4
51/2, 53/4
6 CSG
27/8 Reg
5/8
5
CR-54
65/8
7 CSG
31/2 Reg
1
6
CR-7
75/8
85/8 CSG
41/2 Reg
11/4
7
CR-85
Gotco Casing Roller

41/2, 43/4
To Roll Casing Size
5CSG
Top Connection
23/8 Reg
1/2
Circulation Hole
Indiv. Roller Length
4
Gotco Part No.
CR-5
Gotco Casing Roller
9, 95/8
To Roll Casing Size
10* CSG
Top Connection
41/2 Reg
Circulation Hole
11/2
Individual Roller Length 8
Gotco Part No.
CR-95
103/4, 113/4
12 CSG
65/8 Reg
13/4
9
CR-106
13, 133/8
16, 185/8
65/8 Reg
2
10
CR-133
65/8 Reg
2
11
CR-185
How to Order Gotco Casing Roller

Name and assembly part number.
Casing size and weight.
Top connection, if nonstandard.
Remedial and Repair
Manufactured from specially

selected alloys, designed specifically to resist wear, the casing
roller can be used to restore any
size and weight of casing. The casing roller consists of a mandrel
with a box connection up and
three heavy duty rollers. The I.D.
of each roller is precision ground
to assure proper rotation on the
mandrel. Securing the rollers to
the mandrel is a nose cone which
is retained by large ball bearings.
A through bore provides circulation capabilities. Tools may be run
effectively at relatively slow rotary
speeds and are available with lefthand connections if desired.
Operation
The casing roller should be
made up to the bottom of the drill
string. Lower the pipe and rotate
slowly until the damaged section
is reached. Start circulation,
increase rotation speed and continue to lower slowly. The tapered
nose cone will enter and guide the
tool, allowing it to open the collapsed portion to its original size.
Use of too little pressure will wear
the tool without restoring the casing. Be sure adequate downward
pressure is maintained. Add drill
collars if the string weight is insufficient to assure continued downward progress.
www.gotco-usa.com
Casing Roller
43
Remedial and Repair Casing Scraper
Casing Scraper
The Gotco Casing Scraper is designed to remove scale, mud
cake, cement sheath, embedded bullets, and other foreign material from the inside of the casing wall. Maintaining a clean casing
I.D. is vital to the efficient operation of down-hole tools used in
drilling the well. The resulting smooth surface properly prepares
the casing for subsequent down-hole operations such as packer
setting and squeeze tools.
Construction
Manufactured from alloy
steel and heat treated to provide
strength and durability, each
scraper must pass rigid nondestructive testing to ensure the
highest quality product. Each tool
has six blades specially aligned
on the body to provide the maximum cutting surface area for vertical and rotational scraping. The
blades are designed to give optimum shearing action with the
least amount of restriction to
returning well fluid. The splined
body provides absolute safety and
security by locking each blade
onto an integral part of the
scraper. This unique body design
also allows for ease of maintenance and dressing of the tool. All
casing scrapers can be easily set
for positive or spring loaded
scraping action. Even when set
positive to drift, the spring loaded
design will effectively scrape
multi-weighted casing within the
well. All blades are cast steel and
heat treated to provide long lasting service life.
Gotco Casing Scrapers

Casing Size
41/2
Casing Weight
9.5 - 16.6
Gotco Part No.
CS-7450-1
Replacement Parts
Body
CS-7450
Blades
CS-8452-1
Center Ring
CS-7456
Bolt
CS-7457
Springs
CS-8458
Casing Size
6
Casing Weight
10.5 - 23
Gotco Part No.
CS-7550-3
Replacement Parts
Body
CS-7550
Blades
CS-8552-3
Center Ring
CS-7556
Bolt
CS-7557
Springs
CS-8558
Casing Size
75/8
Casing Weight
24 - 39
Gotco Part No.
CS-7700-3
Replacement Parts
Body
CS-7700
Blades
CS-8702-3
Center Ring
CS-7706
Bolt
CS-7707
Springs
CS-8708
5
15 - 18
CS-7450-2
5
11.5 - 15
CS-7450-3
51/2
14 - 23
CS-7550-1
51/2
13 - 17
CS-7550-2
CS-7450
CS-8452-2
CS-7456
CS-7457
CS-8458
CS-7450
CS-8452-3
CS-7456
CS-7457
CS-8458
CS-7550
CS-8552-1
CS-7556
CS-7557
CS-8558
CS-7550
CS-8552-2
CS-7556
CS-7557
CS-8558
65/8
32
CS-7550-3
65/8
12 - 28
CS-7700-1
7
26 - 38
CS-7700-1
7
17 - 29
CS-7700-2
CS-7550
CS-8552-3
CS-7556
CS-7557
CS-8558
CS-7700
CS-8702-1
CS-7706
CS-7707
CS-8708
CS-7700
CS-8702-1
CS-7706
CS-7707
CS-8708
CS-7700
CS-8702-2
CS-7706
CS-7707
CS-8708
85/8
24 - 49
CS-7860-1
95/8
29.3 - 53.5
CS-7860-2
113/4
103/4
32.75-55.5 42-60
CS-108750-1 CS-108750-1
CS-7860
CS-8862-1
CS-7866
CS-7867
CS-8868
CS-7860
CS-8862-2
CS-7866
CS-7867
CS-8868
CS-108750
CS-108752-1
CS-108756
CS-108757
CS-708758
CS-108750
CS-108752-1
CS-108756
CS-108757
CS-708758
How to Order Gotco Casing Scraper

Casing size and weight.
Assembly
Casing Scraper
44
Assembly of the casing

scraper is quick and simple and
can easily be done in the field.
Secure the tool body. Insert
springs into the blade body drive.
Set blade over body splines at

center of tool, compress blade
and slide into splines. Install
remaining blades in the same
www.gotco-usa.com
manner. Offset the upper blade set

from the lower set by one spline.
Secure blades to body with split
collar ring.
Cross-Over Sub (Rotary Sub)
Remedial and Repair
Cross-Over Sub
(Rotary Sub)
Gotco manufactures a complete line of rotary subs. Each sub
provides a connection between joints of different size or type of
drilling, washover, or tubing strings. Gotco subs may be used in
applications when it is necessary to have frequent disconnection
points. All Gotco subs are manufactured from high-alloy, heat
treated steel and threaded to the customers specifications. Subs
can be ordered pin-to-pin, box-to-box, or box-to-pin and are
available in lengths up to 96 inches. Right or left-hand threads
can be provided.
Gotco Cross-Over Subs (Rotary Subs)

Largest O.D., inches
11/2
13/4
2
Gotco Part No.
XO-14
XO-16
XO-20
Length, inches
10
10
10
21/4
XO-22
10
21/2
XO-24
10
23/4
XO-26
10
3
XO-30
10
31/4
XO-32
10
31/2
XO-34
10

33/4
4
41/4
Gotco Part No.
XO-36
XO-40
XO-42
Length, inches
10
10
10
41/2
XO-44
10
43/4
XO-46
12
5
XO-50
12
51/4
XO-52
12
51/2
XO-54
12
53/4
XO-56
12

6
61/4
61/2
Gotco Part No.
XO-60
XO-62
XO-64
Length, inches
12
12
12
63/4
XO-66
12
7
XO-70
12
71/4
XO-72
14
71/2
XO-74
14
73/4
XO-76
14
8
XO-80
14

81/4
81/2
83/4
Gotco Part No.
XO-82
XO-84
XO-86
Length, inches
14
14
14
9
XO-90
16
91/4
XO-92
16
91/2
XO-94
16
93/4
XO-96
16
10
XO-10
16
101/4
XO-102
16

101/2
103/4
11
Gotco Part No.
XO-104
XO-106
XO-11
Length, inches
16
16
16
111/4
XO-112
16
111/2
XO-114
16
113/4
XO-116
16
12
XO-12
16
121/4
XO-122
16
121/2
XO-124
16

123/4
13
131/4
Gotco Part No.
XO-126
XO-13
XO-132
Length, inches
16
16
16
13 /2
XO-134
16
13 /4
XO-136
16
14
XO-140
16
Pin-to-Pin
Cross-Over
Sub
Box-to-Box
Cross-Over
Sub
How to Order Gotco Cross-Over Subs

O.D., I.D., and length.
Connections, size, and type.
Box-to-Pin
Cross-Over
Sub
www.gotco-usa.com
45
DRILLING & COILED TECHNOLOGY, INC.

Nitrogen Pumping Unit - Land - Offshore - Truck Mounted Design
Phone (281) 591-1402 Fax (281) 999-4251
Nitrogen Heat Recovery Unit
MODEL 180-10-HTRC
MAX CAPACITY..........................................180,000 SCFH.

MAX PRESSURE...............................................10,000 PSI
HEAT RECOVERY
EASY ACCESS
COMPLETE CONTROL FROM CONSOLE
CLOSED LOOP DESIGN
EXHAUST HEAT EXCHANGER
COMPLETE HEAT CONTROL
FULL FILTRATION
STEEL OR ALUMINUM SKID AVAILABLE
Nitrogen Ambient Recovery Unit
MODEL 100-10-AMB
MAX CAPACITY. ........................................100,000 SCFM.

MAX PRESSURE...............................................10,000 PSI
AMBIENT HEAT DESIGN
EASY ACCESS
STAINLESS STEEL CONTROL CONSOLE
CLOSED LOOP DESIGN
LIGHT WEIGHT ...............................................10,400 LBS.
ALUMINUM CONSTRUCTION
FILTRATION
DIMENSIONS.......................................H 8 x L 12 x W 8
46
www.dct-usa.com

Coiled Tubing Units - Land and Offshore Design
Phone (281) 591-1402 Fax (281) 999-4251
Injector Head Assemblies
MODEL 8500
MAX PULL CAPACITY....................................85,000 LBS.

MAX SPEED .........................................................210 FPM
TUBING RANGES..................................1 THROUGH 4
REMOVABLE INSERTS
EASY ACCESS GUARDS
BENT AXLE PISTON MOTORS
HYDRAULIC RELEASE FAIL-SAFE BRAKES
PLANETARY GEAR BOXES
BALANCED DESIGN FOR EASY LIFTING
FILTRATION
WEIGHT ..............................................................7,680 LBS
DIMENSIONS................................H 83 x L 54 x W 55
MODEL 4250
MAX PULL CAPACITY....................................42,500 LBS.

MAX SPEED .........................................................210 FPM
TUBING RANGES..................................1 THROUGH 2
REMOVABLE INSERTS
EASY ACCESS GUARDS
BENT AXLE PISTON MOTOR
HYDRAULIC RELEASE FAIL-SAFE BRAKE
PLANETARY GEAR BOX
BALANCED DESIGN FOR EASY LIFTING
FILTRATION
WEIGHT ..............................................................6,850 LBS
DIMENSIONS................................H 83 x L 54 x W 55
www.dct-usa.com
47

Coiled Tubing Units - Land and Offshore Design
Phone (281) 591-1402 Fax (281) 999-4251
Control Cabin Skid
OFFSHORE OR LAND DESIGN

FULL UNIT CONTROL
CUSTOM BUILT TO FIT TO CUSTOMERS APPLICATION
COMPLETELY INSULATED AIR CONDITIONING AND
HEATING SYSTEM
DATA ACQUISITION SYSTEM
CAPTAINS CHAIR
TELESCOPIC FOR EASY VIEWING
ETCHED STAINLESS CONSOLES
Power Pack Assembly

TRACTOR WET KIT AVAILABLE
CLOSED OR OPEN LOOP DESIGN
FULL FILTRATION
COMPACT
EASY ACCESS FOR MAINTENANCE
AIR TO OIL HEAT EXCHANGER
SUPPLIES UNIT COMPLETE POWER
REMOTE CONTROLLED FROM CABIN
LOW HEIGHT DESIGN
HYDRAULIC HOSE REELS
48
www.dct-usa.com

Coiled Tubing Reel - Land and Offshore Design
Phone (281) 591-1402 Fax (281) 999-4251
Tubing Reel Assembly

FULL RANGE OF CAPACITY SIZES
CUSTOM BUILT TO FIT TO CUSTOMERS APPLICATION
HYDRAULIC RAISED LEVELWIND ARM
TUBING COUNTER SYSTEM
INTEGRAL 1502 PLUMBING DESIGN
MOTOR, FAIL-SAFE BRAKE
GEAR BOX
EASY ACCESS TO INNER PLUMBING
Circulating Swivel
INTEGRAL 1502 DESIGN

15,000 PSI WORKING PRESSURE
22,500 PSI TEST
TRUE BEARINGS
V-PACKING DESIGN
EASY DISASSEMBLY FOR MAINTENANCE
SQUEEZE ADJUSTABLE PACKING FOR LONGEVITY
www.dct-usa.com
49
EZ-TORK Make-Up / Break-Out Unit

Phone (281) 591-1402 Fax (281) 999-4251
Model EZ-TORK 200

This unit is designed to handle torquing needs of not only downhole motors, but also fishing tools, MWD equipment and other
downhole equipment.
The EZ-TORK 200 description below lists the accessories available with the EZ-TORK hydraulic torquing units. EZ-TORK
can be purchased as shown below or components can be purchased separately.
EZ-Tork 200 Comes Complete With:
Standard Features:
A. Primary skid 40W x 132L x 67H
B. 30 HP. Hydraulic console
C. PSI Gauge
Optional Features:
A. 19.5 head beam extension
B. 6 ft. tail stock beam extension
C. Back-up push and pull cylinder
D. Three hydraulic support rollers
E. Spinner
F. Computerized torque control system
complete with printer.
EZ-TORK SPECIFICATIONS
Specification
Diameter Capacity in (mm)
Torque Capacity ft. lbs.
Push/Pull Stroke in (mm)
Overall Length in
Overall Width in (mm)
Overall Height in (mm)
Weight lbs
Torquing Unit
3-1/2 14 (89-356)
190,000
N/A
132
48 (1220)
67 (1700)
9,000
Spinner
3-1/2 14 (89-356)
2,000
N/A
47
19
24 1/2
480
Push/Pull Unit
N/A
N/A
48 (1220)
With Beam: 234
8
46
780
Hydraulic Console Power 30 Hp (15 Kw) Electrical Requirements Available in 60/50 hertz Hydraulic Reservoir Capacity - 100 gal
Model Star Tork

The Star Tork is a continuously rotating machine for quick Make-up / Breakout of connection from 2-3/8 through 22 diameter.
The unit is a self-contained free-standing hydraulic powered unit, designed for fast and accurate Make-up / Breakout of
threaded connections on tubular goods and related equipment.
Star Tork Comes Complete With:
Standard Features:
A. Primary 12 Skid
B. Head Stock 2-3/8 - 22
C. Tail Stock 2-3/8 - 22
D. Hydraulic Console
E. Power Traverse Tail stock
Optional Features:
A. 20 foot Head & Tail stock
extension beam
B. Support Rollers
C. Push & Pull Cylinder Assy.
D. Torque Control Computer
E. Soft Touch Inserts
50
STAR TORK SPECIFICATIONS

Specification
Diameter Capacity in
Push-Pull Stroke in
Overall Width in
Overall Length in
Overall Height in
Weight-lbs.
www.pena-usa.com
Torquing Unit
2-3/8 - 22
100,000
N/A
72
144
96
14,000
Push/Pull Unit
N/A
N/A
48
10
234 with beam
46
780 lbs.
FAZTORK Make-Up / Break-Out Unit

Phone (281) 591-1402 Fax (281) 999-4251
Model Faztork 40,000

This unit is mounted on an oilfield-type skid and it has the capability of operating 2 3/8 through 10 3/4 O.D., with just one
jaw set assembly. Unit torques up to 35,000 foot-pounds at 2,500 p.s.i.
FAZTork 40 Comes Complete With:
Standard Features:
A. Primary skid 58W x 144L x 66H
Adding to the skid possible at customers
request for additional cost.
B. Hydraulic control console 30 hp, 220 / 440 v.
(console dimensions 66W x 60L x 58H)
C. PSI Gauge 6
D. Two speeds high / 12 rpm, low / 6 rpm
E. Hydraulic Oil AW 68-100 gallons
Optional Features:
A. 234 H-Beam extension
FAZTORK SPECIFICATIONS - Model 40,000
B. 72 H-Beam extension
Specification
Torquing Unit
Push/Pull Unit
2-3/8"
N/A
D. Two hydraulic support rollers
35,000
N/A
E. Two manual support rollers
Push/Pull Stroke in
N/A
48"
F. Computer torque control system
Overall Length in
156"
H-BEAM 228"
Overall Width in
Overall Height in
Weight lbs
58"
66"
6,800 lbs
8"
45"
78 lbs
20' Beam
N/A
N/A
N/A
234"
8"
8"
800 lbs
6' Beam
N/A
N/A
N/A
72"
8"
8"
240 lbs
Model Faztork 60,000

This unit is mounted on an oilfield-type skid and it has the capability of operating 2 3/8 through 12 3/4 O.D., with just one
jaw set assembly. Unit torques up to 55,000 foot-pounds at 2,500 p.s.i.
FAZTork 60 Unit Comes Complete With:
Standard Features:
A. Primary skid 57-1/2W x 144L x 76H
Adding to the skid possible at customers
request for additional cost.
B. Hydraulic control console 66W x 60L x 58H
C. PSI Gauge 6
D. Electric motor 30 hp, 220 / 440 v.
E. Two speeds high / 9 rpm, low / 3 rpm
F. Hydraulic Oil AW 68-100 gallons
Optional Features:
FAZTORK SPECIFICATIONS - Model RP 14 - 60,000
A. 234 H-beam extension
B. 72 H-beam extension
Specification
Torquing Unit
Push/Pull Unit
2-3/8" - 12-3/4
N/A
55,000
N/A
D. Two hydraulic support rollers
Push/Pull Stroke in
N/A
48"
E. One manual support roller
Overall Length in
108"
57-1/2"
8"
F. Computer torque control system Overall Width in
Overall Height in
Weight lbs
www.pena-usa.com
88-1/2"
8,900
48"
780
20' Beam
N/A
N/A
N/A
234"
8"
8"
800
6' Beam
N/A
N/A
N/A
72"
8"
8"
240
51
PEDCOR Coiled Tubing Products
INTRODUCTION
Division of GOTCO International
PEDCOR was incorporated in 1990 in Houston, Texas. The company designs and manufactures equipment
specifically for the Coiled Tubing Industry, which includes downhole tools and wellhead equipment.
The innovative equipment designed by Pedcor has enabled us to become a Leader by Design.
The patented SAFESET series of coiled tubing hangers have gained wide acceptance throughout the industry and are yet un-matched by any other company. The SAFESET has become known as the safest and easiest way to hang coiled tubing in the well while maintaining well control at all times.
All tools designed by Pedcor are of unique design, incorporating the highest quality materials. All downhole
tools are designed with the operator in mind. The tools may be field redressed easily and maintained with little effort. All tools are pressure rated at 10,000 psi working pressures.
The success of Pedcor is due in large part to our customers who have had input on equipment design and
requirements.
Pedcor is continually developing new products to meet the increasing demand of the coiled tubing industry.
We invite you to contact our office for special requirements you may have or for equipment not listed herein.
Thank you for your interest in the Pedcor products and we look forward to continuing to serve you in the
future.
PEDCOR INC. HOUSTON, TEXAS PH: 281-376-3784 FAX: 281-370-1462

Division of GOTCO INTERNATIONAL
www.pedcor.com
53
PEDCOR Coiled Tubing Products
Product Listing
SERIES NO.
NAME / DESCRIPTION
SERIES NO.
NAME / DESCRIPTION
10-2100
10-2200
10-2400
10-2500
10-2630
10-2635
10-2700
10-2800
10-2900
10-3000
10-3100
10-3200
10-4500
10-5000
10-5500
10-6500
10-7000
10-7100
10-9000
80-9000
12-2500
13-2200
13-2700
13-3000
13-6500
14-3000
15-2800
15-2900
15-3000
15-5000
15-7000
16-8000
17-1000
18-4000
20-3700
20-4000
20-4500
20-9000
25-6300
25-7200
25-8000
25-9000
26-2500
26-3500
26-5000
27-3800
27-4000
27-5000
RF HANGER
STANDARD MANDREL HANGER
SEGMENTED HANGERS
STANDARD THREADED/FLANGED HANGERS
STANDARD SAFESET HANGER
PRESSURE ACTIVATED (PAS) SAFESET HANGER
LARGE BORE SAFESET 2-9/16" BORE
LARGE BORE SAFESET NON-API BORES
INTERNAL DHSV CONTROL LINE HANGER
EXTERNAL DHSV CONTROL LINE HANGER
CONVENTIONAL DHSV CT COMPLETION
SAFESET HANGER BOP SYSTEM FULL BORE
CONCENTRIC DHSV CONTROL LINE HANGER
CAPILLARY TUBE HANGER
ESP HANGER
INSTALLATION WINDOWS
PUMP OFF PLUGS / LANDING NIPPLES
PUMP OFF CHECK VALVES
LANDING NIPPLES C/W PUMP OFF CHECK VALVES
BALL CHECK VALVES
FLAPPER CHECK VALVES
WASH SHOES
ROLL-ON CONNECTORS
SLIP CONNECTORS
SLIP CONNECTOR - SLIM LINE
INTERNAL SLIP CONNECTOR
HANGER ISOLATION SYSTEM
ADAPTERS / CROSSOVERS
JET PUMP CONNECTOR SYSTEM
HORIZONTAL PRODUCTION NIPPLE
BOW SPRING CENTRALIZER - INTEGRAL
FLUTED CLAMP-ON CENTRALIZER
BOW SPRING CLAMP ON CENTRALIZER
FLUTED CENTRALIZER - INTEGRAL
CEMENT SERVICE STRING
CIRCULATING TOOL
DUAL CIRCULATING TOOL
CEMENTING VALVE ASSEMBLY
COLLAR LOCATOR / CENTRALIZER - MECHANICAL
COLLAR LOCATOR / CENTRALIZER - HYDRAULIC
TUBING END LOCATOR
GAS LIFT MANDREL - CONCENTRIC
GAS LIFT MANDREL - SIDE MOUNT
GAS LIFT MANDREL - CONCENTRIC THREADED
27-7100
28-3000
28-4100
28-4500
28-6100
28-7200
28-8100
29-2000
29-3000
29-6200
30-2600
32-1000
36-1100
38-3000
40-5000
42-2000
50-2000
52-7000
55-1000
61-2000
61-5000
61-6000
61-7500
62-6100
62-6800
62-7300
62-8000
63-8500
64-8500
65-2100
65-7100
66-4000
67-1000
67-5000
68-3250
68-8100
68-8300
68-8500
68-8700
69-1200
69-2200
91-2000
93-2000
SERIES 5
SERIES 6
SWIVEL ASSEMBLY
IMPRESSION BLOCK
SWAGING TOOL
BLIND BOX
FISHING MAGNET
GAUGE CUTTER
WIRELINE GRAB
WIRELINE GRAB - C/W SKIRT AND MANDREL
INTERNAL WIRELINE GRAB
TUBING ISOLATION PLUG
SETTING TOOL - ISOLATION PLUG
WELDING JIG
FILTER - SURFACE CHICKSAN TYPE
BROACH TOOL
PACKER - MECHANICAL COMPRESSION/TENSION
FILTER - DOWNHOLE IN-LINE
CIRCULATING JUNK BASKET
TUBING END LOCATOR
TUBING CLEANER
RELEASABLE OVERSHOT
RATCHET OVERSHOT
HYDRAULIC OVERSHOT
HYDRO-MECHANICAL OVERSHOT
RETRIEVABLE SPEAR
RELEASABLE SPEAR
RATCHET SPEAR
INDEXING TOOL
UP / DOWN JARS
UP / DOWN INTENSIFIERS
THRU TUBING CUTTER
UNDERREAMERS
MOTOR HEAD ASSEMBLY
DOWNHOLE MOTOR
BITS / MILLS
HYDRAULIC DISCONNECT
"J" SERIES PULLING TOOL - HYDRAULIC
"GS" SERIES PULLING TOOL - HYDRAULIC
PULLING TOOL - HYDRAULIC DISCONNECT GS
PULLING TOOL - HYDRAULIC DISCONNECT PRS
KNUCKLE JOINT
NON-ROTATING KNUCKLE JOINT
STABBING SNAKE
PLUG LAUNCHER - MULTIPLE PLUG
TUBING REEL ROTATING JOINT
TUBING REEL ROTATING JOINT
"SAFESET" and "LARGE BORE SAFESET" Registered Trademark of PEDCOR INC., Houston, Texas
"SAFESET" and "LARGE BORE SAFESET" Patented Products of PEDCOR INC.
54
www.pedcor.com
Brake Rims & Bands
Master Oilfield, a division of Gotco International, Inc., is a leading manufacturer in O.E.M. and after market-brake rims and brake bands. Our print files are continuously updated and expanded to offer the latest in
technological advances. Brake rims and brake bands are manufactured to meet and exceed O.E.M. specifications. Material certification will be supplied upon request.
Hard Surface Brake Rims
All brake rims are fabricated from mild steel and hard surfaced by a submerged arc overlay process using special alloy wire. Hard overlay braking service is precision ground to a tolerance of less than .010 total run out
over circumference of rim.
Quality Brake Bands
All brake bands are fabricated from certifiable and traceable high strength alloy steel. Bolt hole patterns are
to be drilled on flat surface prior to rolling as per API standards or to measurement per O.E.M. specifications
that pertain to drawwork type.
For Pricing and Availability

Phone (281) 591-1402 or Fax (281) 999-4251
Master Oilfield
P.O. Box 691245
Houston, TX 77269
Phone (281) 591-1402
Fax (281) 999-4251
www.master-usa.com
55
Index
Index
56
Accessories , Series 150 Overshot . . . . . . . . . . . . . . . . . . .12
Magnet, Fishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Boot Basket (Junk Sub) . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Milling Extension, Series 150 Overshot . . . . . . . . . . . . . .13
Brake Rims & Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Milling Shoe, Series 150 Overshot . . . . . . . . . . . . . . . . . .13
Bumper Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-36
Casing Patch, Lead-Seal Type . . . . . . . . . . . . . . . . . . . . . . .42
Multi-Catch Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Casing Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Model 180-10-HTRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Casing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Model 100-10-AMB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Circulating Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Nitrogen Ambient Recovery Unit . . . . . . . . . . . . . . . . . . . .46
Coiled Tubing Products . . . . . . . . . . . . . . . . . . . . . . . . .52-54
Nitrogen Heat Recovery Unit . . . . . . . . . . . . . . . . . . . . . . .46
Combination Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Overshot Extension Sub . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Control Cabin Skid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Overshot Milling Shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Core-type Junk Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Overshot Milling Extension . . . . . . . . . . . . . . . . . . . . . . . .13
Crossover Sub (Rotary )Sub . . . . . . . . . . . . . . . . . . . . . . . .45
Overshot, Multi-Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Die Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Overshot, Series 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Ditch Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Overshot, Series 150 Accessories . . . . . . . . . . . . . . . . . . .12
Drilling Safety Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Overshot, Series 70 Short-Catch . . . . . . . . . . . . . . . . . . . . .14
Drive Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Oversized Guide, Series 150 Overshot . . . . . . . . . . . . . . .12
Extension Sub, Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Power Pack Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
EZ-TORK 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Pilot Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
FAZTORK 40,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Reverse-Circulating Junk Basket . . . . . . . . . . . . . . . . . . . .22
FAZTORK 60,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Rotary Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41
Fishing Jar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Rotary Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Fishing Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Safety Joint, Drilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Grapple Releasing Spear . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Safety Joint, Washover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Guide, Oversized, Series 150 Overshot . . . . . . . . . . . . . . .12
Series 150 Releasing & Circulating Overshot . . . . . . . . . .2
Guide, Wall Hook, Series 150 Overshot . . . . . . . . . . . . . .12
Short-Catch Overshot, Series 70 . . . . . . . . . . . . . . . . . . . . .14
Impression Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Slips, Multi-Catch Overshot . . . . . . . . . . . . . . . . . . . . . . . .15
Injector Head Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . .47
Spear, Grapple Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Jar Impact Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Spear, Wireline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Jar, Fishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Star Tork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Junk Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Taper Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Junk Mills, Skirted, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Taper Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Junk Sub (Boot Basket) . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Tubing Reel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Lead-Seal Casing Patch . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Wall Hook Guide, Series 150 Overshot . . . . . . . . . . . . . . .12
Lift Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Washover Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Magnet Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Washover Safety Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Magnet, Ditch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Wireline Spear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
www.master-usa.com

Gotco Catalog

Uploaded by

Copyright:

Available Formats

Gotco Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gotco Catalog

Uploaded by

Copyright:

Available Formats

What equipment is described for removing debris from wells?

What equipment is described for removing debris from wells?

What tools are mentioned for repairing or maintaining well casings?

What tools are mentioned for repairing or maintaining well casings?

Contents

Series 150 Releasing & Circulating Overshot . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Taper Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Reverse Circulating Junk Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Fishing Jar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Junk Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Casing Patch, Lead-Seal Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Nitrogen Heat Recovery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Injector Head Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Model EZ-TORK 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Model Faztork 40,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

External Catch Series 150 Releasing & Circulating Overshot

Series 150 Overshot

The Gotco Series 150 Releasing and Circulating Overshot is an

Spiral Catch Equipment

tain an upward strain while the

Series 150 Releasing & Circulating Overshot

truding above it. The upper or

spiral grapple, a type A packer is

How to Order Gotco Series 150 Overshots

When ordering, please specify:

External Catch Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

External Catch Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

External Catch Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

External Catch Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

Series 150 Releasing & Circulating Overshot

Gotco Series 150 Overshots

External Catch Series 150 Overshot Accessories

Wall Hook Guide Weights

Wall Hook Guide

(shown with standard lipped guide)

Hollow Mill Container

Wall Hook Guide If the

When ordering, please specify:

When ordering, please specify:

When ordering, please specify:

Series 150 Overshot Accessories

fish, centralize it, then properly

Lock Rings & Spacer Rings

bled between the top sub and the

Gotco Part No. G10803

Gotco Part No. G10810

Gotco Part No. G10817

Gotco Part No. G10825

Gotco Part No. G10832

Gotco Part No. G10839