GreenMAX

Relay Control Panels

Smart Lighting Control

Built by the industry, for the industry.

GreenMAX

Benefits of GreenMAX
Exclusively From GreenMAX
Dimming and Switching in the Same Cabinet
GreenMAX allows you to set advanced control schemes from a single cabinet

Easy to Install

GreenMAX cabinets are shipped empty to increase ease of installation and components can be shipped
separately to meet your lighting demands, schedule and help manage cash flow

Easy to Design

Unlimited and flexible lighting configurations allow you to program based on behavioral relationship
commands

Easy to Monitor, Manage and Maintain

Configure your lighting system in the space with a portable Handheld Display Unit (HDU) or from a
remote location

Easy Code Compliance

Meets strict energy code performance requirements

Building professionals, architects, system integrators, planners and installers

Flexibility, installation interoperability, simplicity, environmentally friendly
Building owners, facility managers and private consumers
Energy savings, cost benefits, flexibility, comfort, simplicity

Leviton GreenMAX
What is GreenMAX?
GreenMAX is a completely modular design offering a wide variety of relay options. GreenMAX includes
integrated dimming, a 25,000A Short Circuit Current Rating (SCCR) and daylight harvesting. Programming
and monitoring GreenMAX is quick and simple with a portable Handheld Display Unit (HDU) that allows
for onsite or remote access. The modular design allows total installation flexibility and labor savings.
Designed for the contractor, specifier and end user, GreenMAX offers the best performance, reliability,
flexibility and energy savings of any relay control available.

Photocell

Occupancy
Sensor

0-10V BALLAST

Loads
LumaCan
GreenMAX 16 - Relay Cabinet

Digital Switch - 1 button

Digital Switch - 2 buttons

Digital Switch - 4 buttons

Photocell

Occupancy
Sensor

Remote Low Voltage Cabinet

Low Voltage Switch

0-10V BALLAST

GreenMAX 8 - Relay Cabinet

Loads

Keyswitch

Digital Switch - 4 Button Dimmer Control

www.leviton.com/greenmax

GreenMAX

Flexible and Time-Saving Design

For Specifying Engineers and Architects
Ultimate time-saving design flexibilityeasily integrate various lighting control capabilities like
switching, dimming, Behavior controls, scheduling, occupancy sensing and daylight harvesting all
from one system
Scalable solution offers future expansion opportunities
Easy energy code compliance
Eligible for LEED points

Simple, Safe And Cost-Effective Installation

for Contractors
Modular system was designed to make installation of cabinet and conduits easy
Wiring covers and isolation barriers provide total Arc Flash Protection and allow
work to be done with power on without chance of exposure to high voltage
no Arc Flash Suit needed

Occupant Satisfaction and Maximum Control

for End Users
Manage your lighting system in the space from a portable Handheld Display Unit (HDU)no more
walking to and from the electrical room
Programming logic by Behaviors reduces programming time and increases functionality

Programming GreenMAX with Lighting Behaviors

LIGHTING CUSTOMIZATION
GreenMAX controls allow different Behavior settings to be programmed throughout the day. Using the
HDU, any room can be set with just a few button selections:
Select the Behavior desired and time Behavior will take place
Choose any additional Behavior transitions and the time transition will take place
Optional override to sunrise/sunset astronomical clock prevents lights from activating prematurely in
summer or too late in winter
Set Behaviors to scale on a daily, weekly, monthly or holiday schedule
Up to 24 Behaviors per 24 hour period can be programmed and can be as close together as one minute
Simple and Easy Programming
Using the HDU, select the number on the screen corresponding with the desired Behavior
Enter time and dates to be in effect and any corresponding Behavior Modifiers. Behaviors can be set
for entire system or individual rooms/relays

BEHAVIORS
Number
B1

B2
B3
B4
B5
B6
B7
B8

B9

B10

B11

B12

Description
Lights turned ON with the switch.
Can be turned OFF with switch.
Occupancy Sensor will turn OFF upon vacancy.
Lights turned ON with the Occupancy Sensor.
Can be turned ON/OFF with switch.
Occupancy Sensor will turn OFF upon vacancy.
Occupancy Sensor turns lights ON/OFF.
Switch ON/OFF.
Time triggers a Blink Warn sequence, an OFF blink followed by a variable ON delay.
Switch interrupts sequence and starts override timer.
Will automatically turn OFF relay if override timer reaches zero.
Turn ON at specific time.
Turn OFF at specific time.
Occupancy Sensor turns ON lights with occupancy.
Measured light levels above Photocell trigger point turns OFF or keeps lights OFF,
below set-point allows control by Occupancy Sensor.
Occupancy Sensor turns OFF lights with vacancy.
Switch turns ON/OFF lights.
Measured light levels above Photocell trigger point turns OFF or keep lights OFF,
below set-point allows control by Occupancy Sensor.
Occupancy Sensor turns OFF lights with vacancy.
Occupancy Sensor turns ON lights with occupancy.
Measured light levels above Photocell trigger point turns OFF or keep lights OFF,
below set-point allows Occupancy Sensor control.
Switch can turn ON/OFF lights by overriding Occupancy Sensor control.
Occupancy Sensor will turn OFF lights upon vacancy.
Switch ON/OFF.
Measured light levels above Photocell trigger point turns OFF or keep lights OFF,
below set-point allows Switch control.
Turn ON at specific time (Used for Exterior Lighting).
Measured light levels above Photocell trigger point turns OFF or keep lights OFF,
below set-point relinquishes control to the constant ON state.

www.leviton.com/greenmax

GreenMAX

To other
classrooms

GreenMAX Applications

Lumacan

Photocell

Occupancy
Sensor

4-Button
Switch

Handheld
Display
Unit (HDU)

Proven interoperability and seamless integration with building management systems allows GreenMAX
Relay Control Panels to follow set Behaviors based on time, day and the relationship between the switches,
occupancy sensors and photocells in a given area.

Schools

Offices

Retail Stores

Convention Centers

Airports

Restaurants

Government Facilities

Hospitals/Medical Offices

Virtually Any Commercial Building

OFFICE EXAMPLE
Relay 1

Relay 2

Relay 3 Relay 4

To
Lights

LumaCan

GreenMAX

Low Voltage

Zone 2

Relay 5

Zone 2

Zone 1

Relay 9

Zone 2

Relay 10

Relay 8

Relay 6

Zone 1

Relay 7

Zone 1

Window
GreenMAX Cabinet

Office Area Multiple Zones:

Each area may be controlled independently and each room can be
segregated by zone for customizable control.
Rooms are equipped with photocells and occupancy sensors to
achieve optimal daylight harvesting
Using the Remote Low Voltage cabinet to connect sensors and
switches allows shorter and less expensive wiring options
Centralized control for time settings; ready to integrate with
building automation systems

Lights
Wall
Window
Area/Zone Separator
Line/Load
Digital Switch
Remote Low Voltage
LumaCan
Low Voltage Wiring
Photocell
Occupancy Sensor

www.leviton.com/greenmax

GreenMAX

Classroom example
Window

Zone 1

Relay 1

Zone 2
Relay 2

Zone 3

LumaCan
Relay 3

GreenMAX

Classroom 3 Zones:
This typical classroom configuration achieves daylight harvesting
with a photocell and occupancy sensor that turns off the light
when the room is vacant

GreenMAX Cabinet

GreenMAX relays can dim all the lighting within the zone to the
same lighting percentage

Wall

Each row of lighting can be dimmed to different levels based on

the availability of natural light; this setting will dim the lights
nearest the window to match the lighting output of fixtures
further away

Light

Window
Area/Zone Separator
Line/Load
Digital Switch
Remote Low Voltage
LumaCan
Low Voltage Wiring
Photocell
Occupancy Sensor

Command Module
USB Port

LumaCAN
Port

Ethernet
Port

Power
Supply

Main
Processor

Low Voltage
16-Input Card

Communication Link
(Between Command
Module and Relay
Insert Panel)

Wiring
Diagram
Relay
Insert
Panel

Lock

Right
Panel
Cover

Door
with
Split
Hinges

Left Panel
Cover

2-Pole
Relay
Grounding
Points

Lower Ventilation
Cover

Power and
Lighting
Wire Way

Manual
Actuator

GreenMAX Innovation

Levitondeveloping innovative electrical products for over 100 years

GreenMAX System
Industry leading 25,000A Short Circuit Current Rating (SCCR) at 277 VAC withstands circuit faults for
increased safety
Native communication network protocolsBACnet IP, Ethernet and LumaCANare built into each
command module to offer unparalleled connectivity; no additional parts or adapters are needed to
communicate with other products utilizing these protocols
Modular system includes separate empty cabinet enclosures, command modules and Relay Insert
Panels to minimize handling and subsequent damage during installation
Easy updatesloading firmware is automated and only requires plugging in a flash memory card and
pressing a button
System can be connected via Ethernet or LumaCAN networks
All network connections are made with RJ45 connectors and cabling is standard CAT6
Low Voltage Remote Input Card can be combined with LevNet RF Wireless Self-Powered Solutions to
create a wireless hybrid system of inputs
All programming and configurations are stored on a MicroSD memory card, which eliminates need for
non-volatile memory

www.leviton.com/greenmax

GreenMAX

GreenMAX Relay Cabinets

Empty cabinet enclosures ship separately from electronic components
making the cabinets lighter and easier to handle and requiring less
effort to install
Empty cabinet also provides unobstructed access to conduit entry
points and reduces the risk of damaging electronics
Relay cabinets can hold 8, 16, 32 and 48 relays, each with unlimited and
flexible configuration capabilities. The 0-10VDC dimming and switching
relay models can be installed in any available relay slot
Increased Arc Flash Protectionthe cabinet door opens to expose only
the low voltage area of the cabinet
Remote Low Voltage Panels allow the connection points of the low
voltage wiring enclosure to be installed closer to the devices it serves,
reducing wiring and labor costs and making commissioning or troubleshooting easier
Takes only eight screws to assemble the internal Relay Insert Panels and command module of a
48-Relay GreenMAX cabinet
A single relay or group of relays can be separated by sliding an isolation barrier between relays to
eliminate the need for an additional cabinet to handle emergency loads

GreenMAX Switches

Available in 1-, 2-, 4-button and keyswitch configurations

The GreenMAX digital keyswitch provides solutions for public use areas by preventing unauthorized
personnel from turning the switch ON or OFF
Custom engraved labeling available on switch buttons and screwless wall plates
Switch colors available: white, light almond, ivory, gray, black and red; all come with a matching wallplate.
Keyswitch comes with a stainless steel wallplate and tamper-resistant screws (tool included)
Each button of the digital switch has a green LED pilot light to report corresponding relay state
(No LED on keyswitch)
Switches can be ganged together in wallboxes (multi-gang wallplate sold separately)
RJ45 connectors to provide inline connection to the LumaCAN network
Any 4-button switch model can be configured to control 0-10VDC dimming circuits
Easy to access port on top of switch provides connectivity for the GreenMAX HDU

10

GreenMAX Relay Modules

Same physical footprint for 1-pole, 2-pole and dimming latching
relays, allowing the optimal mix of relays to be customized for
each application
Self-contained Dimming and Sensing Relay Module in 1-pole
configurations features daylight harvesting capabilities
All four wires required for 0-10VDC dimming ballast wiring connect
directly to the moduleno additional control board required
All relays are latching with a manual actuator that allows users
to manually bypass the system to turn lights on or off without
CPU power
Relay terminals are connected directly to copper bus for greater strength than soldered circuit board
mounted terminals
Latching relay design retains state during power outages, unlike spring return relays that may change
state in absence of processor signal power
Power supply provides 3-5 second ride-through to maintain processor operation during power loss or
brown-outs
Selective emergency signal response relays may be programmed to turn on, off or ignore an emergency
signal from the command module
The return to closed relay design for 1-pole and 2-pole provides closed contacts on loss of power for
emergency response

Handheld Display Unit

(HDU)
Allows programming, system configuration and
scheduling to be done in the space being
controlled rather than the electrical room to
make commissioning and set-up functions easier
Configure and control the entire GreenMAX
system (or multiple systems) from any convenient
network access pointrelay cabinet, Remote Low
Voltage Panels or digital switches
Provides interface with all devices and relays in the system
One Handheld Display Unit (HDU) can be used for multiple systemsmanage any GreenMAX system
remotely from any network device location
Communicates via LumaCAN or Ethernet
Includes four AAA rechargeable batteries that charge when connected to LumaCAN

www.leviton.com/greenmax

11

ORDERING INFORMATION
CAT. NO.

DESCRIPTION

Tubs and Covers (all cabinets are surface mount with a locking door)
R08TC-100

GreenMAX Relay Cabinet, 8-Relay Size, NEMA 1

R16TC-100

GreenMAX Relay Cabinet, 16-Relay Size, NEMA 1

R32TC-100

GreenMAX Relay Cabinet, 32-Relay Size, NEMA 1

R48TC-100

GreenMAX Relay Cabinet, 48-Relay Size, NEMA 1

Command Modules (includes power supply and main processor unit)

RPM00-100

Main Command Module, 100-277VAC, no inputs

RPM08-108

Main Command Module with 8-Port Low Voltage Input Card, 100-277VAC, 50/60Hz

RPM16-116

Main Command Module with 16-Port Low Voltage Input Card, 100-277VAC, 50/60Hz

Panel Interiors
R0800-000

Relay Insert Panel, Empty with (8) Spaces

R1600-000

Relay Insert Panel, Empty with (16) Spaces

R1616-1CB

Relay Insert Panel with (16) 1-Pole RTC Basic Relays

R1616-1TB

Relay Insert Panel with (16) 1-Pole Basic Relays

R1616-2CB

Relay Insert Panel with (16) 2-Pole RTC Relays

R1616-2TB

Relay Insert Panel with (16) 2-Pole Basic Relays

Dimming and Switching Interior

R1616-1DS

Relay Insert Panel with (16) 1-Pole

Handheld Display Unit (HDU)

RHDU1-000

Handheld Display Unit, Cabinet Mounting

RHDU1-BKT

Handheld Display Unit, Mounting Bracket Requires 2 Gang Back Box

Remote Inputs with Power Supply (all remote inputs are rated 100-277VAC)
RLV08-110

Remote Low Voltage Input Cabinet, 8 Inputs, NEMA 1 Enclosure

RLV16-110

Remote Low Voltage Input Cabinet, 16 Inputs, NEMA 1 Enclosure

Relays (all relays are rated 30A, 120-230-277/347VAC, 50/60Hz)

RELAY-1CB

GreenMAX Latching Relay, 1-Pole RTC Basic

RELAY-1DS

GreenMAX Latching Relay, 1-Pole Dimming and Switching

RELAY-1TB

GreenMAX Latching Relay, 1-Pole Basic

RELAY-2CB

GreenMAX Latching Relay, 2-Pole RTC

RELAY-2TB

GreenMAX Latching Relay, 2-Pole Basic

RELAY-BFM

Blank Filler Module

RGBAR-008

GreenMAX Voltage Barriers for 8 Relay Cabinets

RGBAR-016

GreenMAX Voltage Barriers for 16, 32 and 48 Relay Cabinets

Leviton Manufacturing. Co., Inc. Lighting & Energy Solutions

20497 SW Teton Avenue, Tualatin, OR 97062

Telephone: 1-800-736-6682 FAX: 503-404-5594 Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004

Leviton Manufacturing of Canada, Ltd.

165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 Telephone: 1-800-469-7890 FAX: 1-800-563-1853

Leviton S. de R.L. de C.V.

Lago Tana 43, Mexico DF, Mexico CP 11290 Tel. (+52) 55-5082-1040 www.leviton.com.mx

Visit our Website at www.leviton.com/les

2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

12

G-8323A/K11-ak
Rev Nov 2011