Pg.14 Compact Plate Axials

COMPACT HCFB-HCFT and HCBB-HCBT
PLATE MOUNTED AXIAL FLOW FANS
COMPACT Series type HCFB-HCFT (Plastic impellers)

and HCBB-HCBT (Aluminium impellers)
Plate Mounted Axial Flow Fans
Description
The S&P Compact Plate Mounted Axial Fans
feature, as the name suggests, an extremely
compact design created by the combination
of an internal rotor motor with factory matched
direct drive wrap around impeller hub. This
very low profile design optimises airflow
performance whilst minimising noise generation. The Compact Plate Mounted Axial Fan
series require an absolute minimum depth for
any given wall, ceiling or panel mounted
installation. Designed to be installed directly
into walls, ceilings or panels, the Compact
Plate Mounted Axial Fan series are suitable for
use within a wide range of residential, commercial and industrial ventilation applications.
Applications
- General Ventilation:
Shops , Offices, Cafes, Bars,
Warehouse premises, Garages
- Agricultural Ventilation:
For agricultural ventilation applications the
Compact Plate Mounted Axial Fan series can
be supplied with special high corrosion
resistant constructional features. The specific
application should be specified when
ordering. Please see information concerning
Special Versions.
The range
The Compact Plate Mounted Axial Fan series
is available in eleven (11) standard nominal
diameters from 250 to 1000mm, and
depending upon the model, available with
single or three phase motors in 2, 4, 6 & 8
poles.
Air volume performance ranges from 1,200 to
54,000 m3/hr.
IP 65*
- Industrial Ventilation
OEM equipment applications
* IP55: Models 2-315, 2-355, 800 & 1000
Construction
All COMPACT Plate Mounted Axial Fans
include a one piece bell mouth inlet and
mounting plate manufactured from high grade
galvanised steel. The motor and fan impeller
are firmly supported within this mounting
plate by a strong electrowelded steel support
frame. All models up to and including size
710, include a steel finger proof guard as
standard mounted to the inlet side of the fan.
This whole assembly is protected by a two
stage cataforesis primer and tough black
polyester paint finish. This particular coating
has been evaluated as being suitable for
Outdoor Equipment usage, by Underwriters
Laboratories, Inc (USA).
All models are supplied with a pre-wired wiring
junction box located on the back of the motor
hub for easy wiring access. This wiring junction
box protects all wiring connections against the
ingress of dust and moisture. IP65 Rated*.
All standard Compact Plate Mounted Axial
Fans are supplied in Form (A) configuration.

Airflow over Motor Impeller.
Motors
All Compact Plate Mounted Axial fans incorporate asynchronous induction motors with a
squirrel cage rotor. All motors are manufactured in accordance with UNE-113 and CEI-341 standards. The motor casings are constructed from die cast aluminium with integrated
cooling fins and finished with a tough (black)
weatherproof polyester paint.
As standard, the Compact Plate Mounted
Axial fans incorporate the following motor
specifications:
IP65 (IP55 for models 2-315, 2-355, 800 &
1000).
Class F Insulation (-40 C to +70 C working
temperatures).
Suitable for usage in environments up to
95% RH.
Speed Controllable (except 2 pole models,

/4-630, 710, 800 & 1000 and explosion
proof versions).
Three Phase models can be supplied to
special order for use with frequency inverters speed controllers. Please enquire.
PG-11 cable glands on terminal boxes.
Thermal protection
Motors can be supplied suitable for the following electrical supplies:
Single Phase 230V 50 Hz.
Three Phase 230/400V 50 Hz.
Three Phase 400V 50Hz.
For other special voltages and frequencies,
please enquire.
All single phase motors are supplied complete
with a capacitor which is located inside the
wiring terminal box.
Special versions
Special versions of the Compact Plate
Axial Fan are available, i.e.:
Agricultural construction.
Deep guard for OEM applications.
Depending upon the application requirements
please enquire.
14
Before installation, it is important to check

that the product electrical characteristics
listed on the data plate label (voltage,
power, frequency etc), match those of the
intended electrical supply.
/ 4 - 4 0 0 / H
1 - H:
Compact Plate Axial Fan
2 - C:
Series designation
3-
Impeller Type:
F:
G:
B:
43 -B:
Plastic (fibre-reinforced) 250- 630,

single part plastic impeller and hub.
710 - 1000, separate plastic
impeller with aluminium hub
Number of Poles (fan speed):

(approx. 2900 r.p.m. - 50 Hz)
4:
(approx. 1400 r.p.m. - 50 Hz)
6:
(approx. 900 r.p.m. - 50 Hz)
8:
Plastic (fibre-reinforced) 250- 630,*

separate plastic impeller and hub
Die Cast Aluminium 250- 400,
single part aluminium impeller and hub
450 - 1000, separate aluminium
impeller with aluminium hub
Electrical Connection:
Single Phase
T: Three Phase
53 2:
X:
P:
N:
S:
L:
C:
Ex:
(approx. 700 r.p.m. - 50 Hz)
6-:
Nominal Diameter of Fan. (mm).
7-:
Pitch Angle. H high or L low
8A:
Direction of Air:
Motor-Impeller (standard for plate
mounted models)
B: Impeller-Motor
9-
* Only in special 60Hz versions under request
Special Construction
W: With remote mounted wiring terminal box
M: Without wiring terminal box
G:
Motor support without inlet finger guard

Deep motor support
Without plate
Motor and impeller only
Weatherproof Protected
Condensation Protected
Explosion proof versions in accordance to ATEX Directive, for three
phase models:
- Increased safety
II2G EExeIIT3
- Flame proof, only for models 800
and 1000
II2G EExdIIBT5 or EExdIICT4
Special corrosion treatment for
agricultural applications
Supply Voltages and Frequencies

"
Mains supply
voltage
Motor Type
Connection
Speed
"
SINGLE PHASE
220-240V 50Hz
230V 50Hz
High
"
THREE PHASE
220-240V
50Hz
230/400V 50Hz
High
THREE PHASE
230/400V 50Hz
Low*
"
High
380-415V
High
400V 50Hz
50Hz
Low*
*from sizes 450 up to 630 mm diameter.
Acoustic characteristics
The sound levels NPS- illustrated in the tabulated performance data for the S&P COMPACT Plate Mounted Axial fans, correspond to the value of
sound pressure dB(A), measured in free field conditions at a distance equivalent to three times the diameter of the impeller or a minimum of 1.5
meters whichever is the greater.
Sound power level spectrum in dB(A) at the corresponding octave band averages.
"
"
LwA ASP QMAX

2-250
2-315
2-355
63
50
51
58
125
61
62
63
250
68
82
87
500
73
77
83
1000 2000 4000 8000

74
74
67
58
85
85
79
71
89
92
86
79
LwA ASP QMAX

4-250
4-315
4-355
4-400
4-450
4-500
4-560
4-630
4-710
4-800/L
4-800/H
4-1000/L
4-1000/H
63
44
37
39
41
40
50
47
52
56
61
64
68
71
125
50
47
59
62
65
68
72
75
78
83
86
90
93
250
57
57
56
58
62
67
70
73
76
81
84
88
91
500
58
61
65
67
68
73
82
81
84
89
92
96
99
1000 2000 4000 8000

60
59
53
42
66
63
57
48
70
66
61
52
74
70
66
43
77
71
67
58
79
77
72
61
82
79
74
65
86
83
77
68
89
86
81
71
95
91
86
77
98
94
89
80
102
98
93
84
105 101 96
87
"
LwA ASP QMAX

6-355
6-400
6-450
6-500
6-560
6-630
6-710
6-800/L
6-800/H
6-1000/L
6-1000/H
63
39
34
35
39
41
43
51
56
58
63
66
125
45
46
50
52
55
59
65
70
72
77
80
250
46
49
52
55
60
62
68
73
75
80
83
500
52
59
61
63
67
70
77
82
84
89
92
1000 2000 4000 8000

53
54
48
37
60
60
53
41
64
62
56
45
67
65
59
49
71
70
64
53
71
69
67
56
80
79
73
62
85
84
78
67
87
86
80
69
92
91
85
74
95
94
88
77
LwA ASP QMAX

8-450
8-500
8-560
8-630
8-710
8-800/L
8-800/H
8-1000/L
8-1000/H
63
42
42
46
45
57
61
63
68
72
125
42
42
46
48
57
61
63
68
72
250
47
51
55
57
64
69
71
76
80
500
55
56
60
63
71
75
77
82
86
1000 2000 4000 8000

57
58
49
39
59
59
52
42
62
62
55
45
63
64
58
46
73
73
65
55
77
77
70
60
79
79
72
62
84
84
77
67
88
88
81
71
"
15
H C F T
Reference
Technical characteristics with PLASTIC impellers

"
Type
Speed
Maximum
power
absorbed
(r.p.m.)
(W)
Maximum
current
(A)
at 230 V
at 400 V
Sound
pressure
level
Maximum
air
volume
Weight
(dB(A))
(m3/h)
(kg)
35
2160
52
54
58
60
65
68
71
72
1215
2350
3490
5070
6760
9200
12480
17060
5
7
8
9
13
16
22
25
50
52
53
56
59
60
66
2210
3400
4550
5820
7870
10750
17570
8
9
13
16
22
25
27
REB-1
REB-1
REB-2,5
REB-2,5
REB-2,5
REB-5N
REB-5N
REB-1
REB-1
REB-2,5
REB-2,5
REB-2,5
REB-5N
46
49
52
53
59
3500
4660
5990
8340
11960
13
16
22
25
27
REB-1
REB-1
REB-2,5
REB-2,5
65
2160
52
54
58
60
65
68
71
72
75
79
82
84
87
1220
2350
3490
5070
6760
9200
12480
17060
22150
24960
32600
42000
54000
5
7
8
9
13
16
22
25
27
37
52
67
95
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-3,5
RMT-3,5
50
52
53
56
59
60
66
70
72
75
78
2210
3400
4550
5820
8260
11000
16500
19370
22000
28000
36400
8
9
13
16
22
25
27
31
36
54
62
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
46
49
52
53
59
63
65
68
72
3500
4660
5990
8340
11960
14000
17160
20490
27040
13
16
22
25
27
63
64
68
71
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
SINGLE PHASE 2 POLES
HCFB/2-250/H
2500
250
1,2
HCFB/4-250/H
HCFB/4-315/H
HCFB/4-355/H
HCFB/4-400/H
HCFB/4-450/H
HCFB/4-500/H
HCFB/4-560/H
HCFB/4-630/H
1330
1300
1225
1200
1290
1290
1250
1200
60
100
200
340
480
650
980
1700
HCFB/6-355/H
HCFB/6-400/H
HCFB/6-450/H
HCFB/6-500/H
HCFB/6-560/H
HCFB/6-630/H
HCFB/6-710/H
800
750
835
840
900
800
900
90
110
220
290
420
510
1300
HCFB/8-450/H
HCFB/8-500/H
HCFB/8-560/H
HCFB/8-630/H
HCFB/8-710/H
625
605
610
585
625
130
160
240
320
480
HCFT/2-250/H
2500
250
0,3
0,6
1,0
1,6
2,3
3,0
4,9
7,6
Speed*
controller
0,5
0,6
1,2
1,6
2,4
2,6
5,7
0,7
0,9
1,3
1,7
2,4
THREE PHASE 2 POLES
0,9
0,5
THREE PHASE 4 POLES
HCFT/4-250/H
HCFT/4-315/H
HCFT/4-355/H
HCFT/4-400/H
HCFT/4-450/H
HCFT/4-500/H
HCFT/4-560/H
HCFT/4-630/H
HCFT/4-710/H
HCFT/4-800/L-X (1,5kW)
HCFT/4-800/H-X (3kW)
HCFT/4-1000/L-X (3kW)
HCFT/4-1000/H-X (5,5kW)
1330
1300
1260
1350
1230
1350
1320
1420
1350
1420
1430
1400
1460
60
150
200
300
500
660
1210
1550
2200
2300
4200
4400
7200
HCFT/6-355/H
HCFT/6-400/H
HCFT/6-450/H
HCFT/6-500/H
HCFT/6-560/H
HCFT/6-630/H
HCFT/6-710/H
HCFT/6-800/L-X (0,55kW)
HCFT/6-800/H-X (0,75kW)
HCFT/6-1000/L-X (1,1kW)
HCFT/6-1000/H-X (1,5kW)
875
830
835
840
900
810
920
900
940
940
950
90
110
190
250
410
460
1100
1180
1220
1400
2330
HCFT/8-450/H
HCFT/8-500/H
HCFT/8-560/H
HCFT/8-630/H
HCFT/8-710/H
HCFT/8-800/L-X (0,25kW)
HCFT/8-800/H-X (0,37kW)
HCFT/8-1000/L-X (0,37kW)
HCFT/8-1000/H-X (0,75kW)
660
625
610
635
670
710
690
700
725
130
150
230
310
450
580
700
720
1100
0,3
0,6
0,8
1,4
1,7
2,7
3,9
5,2
7,0
6,6
12,6
12,3
20,5
0,2
0,3
0,5
0,8
1,0
1,6
2,3
3,0
4,0
3,8
7,3
7,1
12,0
THREE PHASE 6 POLES
0,5
0,5
0,8
0,9
1,6
2,0
4,9
3,9
4,3
5,6
7,6
0,3
0,3
0,5
0,5
0,9
1,2
2,8
2,2
2,5
3,2
4,4
THREE PHASE 8 POLES
0,7
0,7
1,0
1,3
2,0
2,2
3,0
3,0
4,6
0,4
0,4
0,6
0,8
1,2
1,3
1,7
1,7
2,7
* Three phase speed controllers (RMT) are suitable for 400 V 50 Hz electrical connection only.
16
Speed
Maximum
power
absorbed
(r.p.m.)
(W)
Maximum current
absorbed
(A)
at 230 V
at 400 V
Sound
pressure
level
Maximum
air
volume
Weight
Speed*
controller
(dB(A))
(m3/h)
(kg)
65
75
81
2160
4800
7000
5
8
9
52
54
58
60
65
68
71
72
1215
2350
3490
5070
6760
9200
12480
17060
5
7
8
9
13
16
22
25
50
52
53
56
59
60
66
2210
3400
4550
5820
7870
10750
17570
8
9
13
16
22
25
27
REB-1
REB-1
REB-2,5
REB-2,5
REB-2,5
REB-5N
REB-5N
REB-1
REB-1
REB-2,5
REB-2,5
REB-2,5
REB-5N
46
49
52
53
59
3500
4660
5990
8340
11960
13
16
22
25
27
REB-1
REB-1
REB-2,5
REB-2,5
65
75
81
2160
4800
7000
5
8
9
52
54
58
60
65
68
71
72
75
79
82
84
87
1220
2350
3490
5070
6760
9200
12480
17060
22150
24960
32600
42000
54000
5
7
8
9
13
16
22
25
27
37
52
67
95
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-3,5
RMT-3,5
50
52
53
56
59
60
66
70
72
75
78
2210
3400
4550
5820
8260
11000
16500
19370
22000
28000
36400
8
9
13
16
22
25
27
31
36
54
62
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
46
49
52
53
59
63
65
68
72
3500
4660
5990
8340
11960
14000
17160
20490
27040
13
16
22
25
27
63
64
68
71
RMT-1,5
RMT-1,5
RMT-1,5
RMT-1,5
HCBB/2-250/H
HCBB/2-315/H (0,37kW)
HCBB/2-355/H (0,55kW)
2500
2780
2750
250
770
1240
HCBB/4-250/H
HCBB/4-315/H
HCBB/4-355/H
HCBB/4-400/H
HCBB/4-450/H
HCBB/4-500/H
HCBB/4-560/H
HCBB/4-630/H
1330
1300
1225
1200
1290
1290
1250
1200
60
100
200
340
480
650
980
1700
HCBB/6-355/H
HCBB/6-400/H
HCBB/6-450/H
HCBB/6-500/H
HCBB/6-560/H
HCBB/6-630/H
HCBB/6-710/H
800
750
835
840
900
800
900
90
110
220
290
420
510
1300
HCBB/8-450/H
HCBB/8-500/H
HCBB/8-560/H
HCBB/8-630/H
HCBB/8-710/H
625
605
610
585
625
130
160
240
320
480
HCBT/2-250/H
HCBT/2-315/H (0,37kW)
HCBT/2-355/H (0,55kW)
2500
2780
2700
250
770
1240
HCBT/4-250/H
HCBT/4-315/H
HCBT/4-355/H
HCBT/4-400/H
HCBT/4-450/H
HCBT/4-500/H
HCBT/4-560/H
HCBT/4-630/H
HCBT/4-710/H
HCBT/4-800/L-X (1,5kW)
HCBT/4-800/H-X (3kW)
HCBT/4-1000/L-X (3kW)
HCBT/4-1000/H-X (5,5kW)
1330
1300
1260
1350
1230
1350
1320
1420
1350
1420
1430
1400
1460
60
150
200
300
500
660
1210
1550
2200
2300
4200
4400
7200
HCBT/6-355/H
HCBT/6-400/H
HCBT/6-450/H
HCBT/6-500/H
HCBT/6-560/H
HCBT/6-630/H
HCBT/6-710/H
HCBT/6-800/L-X (0,55kW)
HCBT/6-800/H-X (0,75kW)
HCBT/6-1000/L-X (1,1kW)
HCBT/6-1000/H-X (1,5kW)
875
830
835
840
900
810
920
900
940
940
950
90
110
190
250
410
460
1100
1180
1220
1400
2330
HCBT/8-450/H
HCBT/8-500/H
HCBT/8-560/H
HCBT/8-630/H
HCBT/8-710/H
HCBT/8-800/L-X (0,25kW)
HCBT/8-800/H-X (0,37kW)
HCBT/8-1000/L-X (0,37kW)
HCBT/8-1000/H-X (0,75kW)
660
625
610
635
670
710
690
700
725
130
150
230
310
450
580
700
720
1100
1,2
1,7
2,2
0,3
0,6
1,0
1,6
2,3
3,0
4,9
7,6
0,5
0,6
1,2
1,6
2,4
2,6
5,7
0,7
0,9
1,3
1,7
2,4
THREE PHASE 2 POLES
0,9
2,1
3,1
0,5
1,2
1,8
THREE PHASE 4 POLES
0,3
0,6
0,8
1,4
1,7
2,7
3,9
5,2
7,0
6,6
12,6
12,3
20,5
0,2
0,3
0,5
0,8
1,0
1,6
2,3
3,0
4,0
3,8
7,3
7,1
12,0
THREE PHASE 6 POLES
0,5
0,5
0,8
0,9
1,6
2,0
4,9
3,9
4,3
5,6
7,6
0,3
0,3
0,5
0,5
0,9
1,2
2,8
2,2
2,5
3,2
4,4
THREE PHASE 8 POLES
0,7
0,7
1,0
1,3
2,0
2,2
3,0
3,0
4,6
0,4
0,4
0,6
0,8
1,2
1,3
1,7
1,7
2,7
* Three phase speed controllers (RMT) are suitable for 400 V 50 Hz electrical connection only.
17
Type
Technical characteristics with ALUMINIUM impellers

"
Installation
DEF-D
PER-CN
PER-W
DEF-AN
PER-CN
PER-W
DEF-D
DEF-1001A
HCFT/4-1000/H
"
Compact model
Wire Protection Guards
Type
Exhaust Side Louvre Shutters
Outlet
Inlet
Plastic
Aluminium
HCFB / HCFT 250
DEF-250 D
PER-250 W
PER-250 CN
HCFB / HCFT 315
DEF-325 D
PER-355 W
PER-355 CN
HCFB / HCFT 355
DEF-375 D
PER-355 W
PER-355 CN
HCFB / HCFT 400
DEF-450 D
PER-400 W
PER-400 CN
HCFB / HCFT 450
DEF-450 D
PER-450 W
PER-450 CN
HCFB / HCFT 500
DEF-525 D
PER-500 W
PER-500 CN
HCFB / HCFT 560
DEF-630 D
PER-560 W
PER-630 CN
HCFB / HCFT 630
DEF-630 D
PER-630 W
PER-630 CN
HCFB / HCFT 710
DEF-800 D
PER-710 W
PER-710 CN
HCFT 800
DEF-800 D
DEF- 800 AN
PER-800 W
PER-800 CN
HCFT 1000
DEF-1000 D
DEF-1000 AN
PER-1000 W
PER-1000 CN
HCFT / 4-1000 / H
DEF-1000 D
DEF-1001 AN
PER-1000 W
PER-1000 CN
Electrical accessories
REB
Electronic, single phase speed
controller.
See accessories pages for further
details.
RMB/RMT
Auto transformer, single and three
phase speed controller.
See accessories pages for further
details.
18
Dimensions (mm)
Type
F
Number of Poles
J
Number of Poles
/6
/8
/2
/4
/2
/4
3 Ph
1 Ph
250
315
260
220
254
10
122
122
294
59
59
/6
/8
53
12
40
65
315
400
330
280
315
10
298
122
329
219
32
68
12
40
65
355
450
380
315
355
10
298
129
129
371
220
45
45
75
12
40
65
400
500
420
355
400
10
129
129
422
40,5
40,5
78
12
40
65
450
560
480
400
450
10
150
150
150
476
48
48
48
91
12
40
65
500
630
560
450
500
10
150
150
150
536
44,5
44,5
44,5
97
12
40
65
560
710
630
510
560
10
218,5
150
150
596
110,5
42
42
98,5
12
40
65
630
800
710
580
630
12
218,5
150
150
674
110,5
41
41
103
12
40
65
710
900
800
636
710
12
218,5
218,5
218,5
733
134
134
134
91,5
16,5
40
65
18
16
B
C
"
Type
/4
/6
/8
/4
/6
/8
HCBT-800
1000
800
800
92
189
926
345
380
310
345
310
345
181
203
162
181
162
181
HCBT-1000
1250
1000
1000
110
174
1154
380
345
380
345
380
203
181
203
181
203
19
"

Performance curves - HCFB/HCFT - HCBB/HCBT

Q = Air volume in, m3/hr and m3/s
Pe = Static pressure in mmWG and Pa.
Dry air at 20 C and 760 mmHg.
Air flow data in accordance with the following standards: UNE 100-212-89, BS 848, Part 1, AMCA 210-85 and ASHRAE 51-1985.
mm
WG
Do Not Select a Fan

with a Working
Point in this Area
Typical fan selection:

Do not select an airflow performance in the area of the graph left of
the dashed line (as shown to the right coloured area).
To find the working point of the fan at a required volume, it is first
necessary to plot a system resistance curve. The working point of
the fan lies at the intersection of the system resistance curve and
that of the fan performance curve as illustrated to the right.
System
Resistance
Curve
Working Point of Fan
Required Air Volume
Example: Required air volume 10,000 m3/h at 3 mmWG.

Fan working point 11,300 m3/h at 4 mmWG.
mm
WG
mm
WG
mm
WG
mm
WG
20
mm
WG
mm
WG
mm
WG
mm
WG
mm
WG
21



mm
WG
mm
WG
mm
WG
Pa
mm
WG
ca
80
70
60
50
40
30
20
10
6-500
0
0.0
mm
WG
mm
WG
22
1000
0.2
2000
0.4
0.6
3000
0.8
4000
1.0
1.2
5000
1.4
6000
1.6
m3/h
m3/s
mm
WG
mm
WG
mm
WG
mm
WG
mm
WG
mm
WG
23



mm
WG
mm
WG
mm
WG
mm
WG
mm
WG
mm
WG
24

mm
WG
mm
WG
mm
WG
25

Pg.14 Compact Plate Axials

Uploaded by

Copyright:

Available Formats

Pg.14 Compact Plate Axials

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pg.14 Compact Plate Axials

Uploaded by

Copyright:

Available Formats

COMPACT HCFB-HCFT and HCBB-HCBT

PLATE MOUNTED AXIAL FLOW FANS

COMPACT Series type HCFB-HCFT (Plastic impellers)

Plate Mounted Axial Flow Fans

Fans are supplied in Form (A) configuration.

Speed Controllable (except 2 pole models,

Before installation, it is important to check

Compact Plate Axial Fan

Plastic (fibre-reinforced) 250- 630,

Number of Poles (fan speed):

(approx. 1400 r.p.m. - 50 Hz)

(approx. 900 r.p.m. - 50 Hz)

Plastic (fibre-reinforced) 250- 630,*

(approx. 700 r.p.m. - 50 Hz)

Nominal Diameter of Fan. (mm).

Pitch Angle. H high or L low

* Only in special 60Hz versions under request

Motor support without inlet finger guard

Supply Voltages and Frequencies

*from sizes 450 up to 630 mm diameter.

LwA ASP QMAX

1000 2000 4000 8000

LwA ASP QMAX

1000 2000 4000 8000

LwA ASP QMAX

1000 2000 4000 8000

LwA ASP QMAX

1000 2000 4000 8000

COMPACT HCFB-HCFT and HCBB-HCBT

Plate Mounted Axial Flow Fans

COMPACT HCFB-HCFT and HCBB-HCBT

Technical characteristics with PLASTIC impellers

SINGLE PHASE 2 POLES

SINGLE PHASE 4 POLES

SINGLE PHASE 8 POLES

Plate Mounted Axial Flow Fans

SINGLE PHASE 8 POLES

THREE PHASE 4 POLES

THREE PHASE 6 POLES

THREE PHASE 8 POLES

SINGLE PHASE 2 POLES

SINGLE PHASE 4 POLES

SINGLE PHASE 6 POLES

SINGLE PHASE 8 POLES

THREE PHASE 4 POLES

THREE PHASE 6 POLES

THREE PHASE 8 POLES

COMPACT HCFB-HCFT and HCBB-HCBT

Plate Mounted Axial Flow Fans

Technical characteristics with ALUMINIUM impellers

COMPACT HCFB-HCFT and HCBB-HCBT

Plate Mounted Axial Flow Fans

Wire Protection Guards

Exhaust Side Louvre Shutters

HCFB / HCFT 250

HCFB / HCFT 315

HCFB / HCFT 355

HCFB / HCFT 400

HCFB / HCFT 450