C

y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
T
H
G
T
CYLINDRICAL CASED AXIAL FLOW FANS
THGT Series
Adjustable Pitch F400-120, F300-120 and F200-120
Rated Fans
A P P L I C A T I O N S
Car Parks Industrial
kitchens
Officially approved
to EN12101-3
standard (cer-
tificate number
0370-CPD-0348)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0742)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased
axial flow fans designed for smoke extract in fire
conditions and certified F400-120, F300-120 and
F200-120 (CE marked).
Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised
finish for all models.
All models F400-120 except 2 poles incorporate
separate high grade die-cast aluminium blades
locked within an aluminium injected hub (diameters
from 400 to 630) or a pressed sheet steel hub.
(diameters from 710 to 1250).
F300-120 and F200-120 models incorporate an
aluminium injected hub (diameters from 400 to 800)
or a pressed sheet steel hub. (diameters from 900
to 1250).
2 POLES F400-120 model with aluminium impeller
/ hub formed from a one piece casting.
All models are available in both short and long
casing versions except 2 poles F400-120 model only
supplied with long casing.
Long casing versions (L) include an external terminal
box.
Suitable for horizontal or vertical mounting
installation.
Motors
Available, depending upon the model:
- with three phase motors in 4 or 6 poles.
- with three phase two speed motors, 4/8 or 6/12
poles.
F400-120 motors are IP55, class H insulation.
F300-120 motors are IP55, class H insulation.
F200-120 motors are IP55, class F insulation.
Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
Motors suitable for inverter control. In emergeny
operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
EAF B2-1
T
H
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
THGT / TGT
Number of poles 4
Nominal diameter (mm) 1250
Number of blades 6
THGT/4-1250-6/_-_ kW
TGT/4-1250-6/_-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommended
motor
power (kW)
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Table of correction factors for the
calculation of the sound power
level spectrum.
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWG
Ps
Pa
155
EAF B2-1














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B2-2



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B2-2














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B2-3



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B2-3














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B2-4



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B2-4
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B2-5,6,7,8
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B2-9














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B2-10



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B2-10














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B2-11



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B2-11
T
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT Series
Adjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
Workshops
Warehouses Commercial
premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
Pitch angle
173
OAF B2-1
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
T
H
G
T
THGT / TGT
Table of correction factors for the
calculation of the sound power
level spectrum.
Number of poles 4
Nominal diameter (mm) 800
Number of blades 3
THGT/4-800-3/_-_ kW
TGT/4-800-3/_-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommended
motor
power (kW)
Hz A B C
63 22 20 18
125 19 19 17
250 13 11 12
500 6 5 6
1000 4 5 5
2000 6 7 6
4000 11 13 12
8000 18 20 20
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWG
Ps
Pa
148
OAF B2-1














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
OAF B2-4



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
OAF B2-4
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
T
H
G
T
CYLINDRICAL CASED AXIAL FLOW FANS
THGT Series
Adjustable Pitch F400-120, F300-120 and F200-120
Rated Fans
A P P L I C A T I O N S
Car Parks Industrial
kitchens
Officially approved
to EN12101-3
standard (cer-
tificate number
0370-CPD-0348)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0742)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased
axial flow fans designed for smoke extract in fire
conditions and certified F400-120, F300-120 and
F200-120 (CE marked).
Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised
finish for all models.
All models F400-120 except 2 poles incorporate
separate high grade die-cast aluminium blades
locked within an aluminium injected hub (diameters
from 400 to 630) or a pressed sheet steel hub.
(diameters from 710 to 1250).
F300-120 and F200-120 models incorporate an
aluminium injected hub (diameters from 400 to 800)
or a pressed sheet steel hub. (diameters from 900
to 1250).
2 POLES F400-120 model with aluminium impeller
/ hub formed from a one piece casting.
All models are available in both short and long
casing versions except 2 poles F400-120 model only
supplied with long casing.
Long casing versions (L) include an external terminal
box.
Suitable for horizontal or vertical mounting
installation.
Motors
Available, depending upon the model:
- with three phase motors in 4 or 6 poles.
- with three phase two speed motors, 4/8 or 6/12
poles.
F400-120 motors are IP55, class H insulation.
F300-120 motors are IP55, class H insulation.
F200-120 motors are IP55, class F insulation.
Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
Motors suitable for inverter control. In emergeny
operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
EAF B1-1
T
H
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
THGT / TGT
Number of poles 4
Nominal diameter (mm) 1000
Number of blades 6
THGT/4-1000-6/_-_ kW
TGT/4-1000-6/_-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommended
motor
power (kW)
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Table of correction factors for the
calculation of the sound power
level spectrum.
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWG
Ps
Pa
153
EAF B1-1

Dimensions 50Hz

Propeller fan for wall or panel mounting to convey air directly to the
outside.

Sickle Blade impellers, in conjunction with the external rotor motors.

Wall plate is made of high grade galvanized sheet steel, with painted finish.

Statically and dynamically balanced to ISO 1940 standard.

Low noise level with high efficiency.

Accessories such as speed controller and mounting accessories can be
supplied upon request.

Performance of 710-1000 are not AMCA licensed.







Propeller Fans APK Series
Model A B D E F G H I J
Wt
(kg)
APK 315 4P-1 1S 400 330 320 365 10 - 149 68 82 7
APK 355 4P-1 1S 450 380 363 411 10 - 156 75 82 7.5
APK 400 4P-1 1S 500 420 410 464 10 12 200 78 122 9
APK 450 4P-1 1S 560 480 457 522 10 - 204 91 114 11.5
APK 500 4P-1 1S 630 560 512 572 10 13 201 97 104 16
APK 500 6P-1 1S 630 560 512 572 10 - 201 97 104 16
APK 560 6P-1 1S 710 630 570 649 10 - 213 99 114 21.5
APK 560 6P-3 1S 710 630 570 649 10 - 188 99 89 21.5
APK 630 4P-3 1S 800 710 640 730 12 25 182 103 79 24
APK 630 6P-3 1S 800 710 640 730 12 7 182 103 79 24
APK 710 6P-3 1S 900 800 720 810 12 11 207 92 115 27

Kruger Ventilation Industries
certifies that the APK series
shown herein is licensed to
bear the AMCA Seal. The
ratings shown are based on
tests and procedures
performed in accordance with
AMCA publication 211 and
comply with the requirements
of the AMCA Certified Ratings
Program.
315 - 710
1 PHASE 3 PHASE
Technical Data 50Hz
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max. Current in AMP
Insulation
Class
dB (A)
at 3m
RPM
230V 400V
APK 315 4P-1 1S 2048 120 IP54 Single Phase 4 50 0.53 - F 47 1400
APK 355 4P-1 1S 2768 120 IP54 Single Phase 4 50 0.55 - F 53 1400
APK 400 4P-1 1S 4870 290 IP54 Single Phase 4 50 1.2 - F 54 1360
APK 450 4P-1 1S 6516 380 IP54 Single Phase 4 50 2.0 - F 58 1370
APK 500 4P-1 1S 8752 850 IP54 Single Phase 4 50 3.8 - F 63 1350
APK 500 6P-1 1S 5785 310 IP54 Single Phase 6 50 1.3 - F 54 870
APK 560 6P-1 1S 8150 410 IP54 Single Phase 6 50 1.8 - F 55 820
APK 560 6P-3 1S 8366 450 IP54 Three Phase 6 50 - 0.9 F 55 860
APK 630 4P-3 1S 12272 1400 IP54 Three Phase 4 50 - 2.5 F 67 1330
APK 630 6P-3 1S 11423 740 IP54 Three Phase 6 50 - 1.5 F 57 880







A
B

E
F
G
H
I
J
J
H
APK 710 6P-3 1S 15145 1000 IP54 Three Phase 6 50 2.6 F 60 920 -
EAF B1-2
Performance Data 50Hz
Dimensions 50Hz



































Propeller Fans APK Series





Model

A

B

D

E

F

H

M

Wt (kg)
APK 800 6P-3 1S

970

910

797

960

14.5

170

17

46
APK 800 8P-3 1S

970

910

797

960

14.5

170

17

45
APK 900 12P-3

1S

1070

1010

914

1115

14.5

210

22

55
APK 1000 12P-3 1S

1170

1110

1000

1140

14.5

210

22

61
















- Performance certified is for installation type A

Free inlet, Free outlet.

- Performance ratings do not include the effects of appurtenances (accessories).

- Speed (RPM) shown is nominal. Performance is based on actual speed of test.

S
t
a
t
i
c

P
r
e
s
s
u
r
e

(
P
a
)

Flow Rate (m/h)
0
40
80
120
160
0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000 26000 28000
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(
P
a
)

Flow Rate (m3/h)
800 -

1000

A
B

F
H
M
0
40
80
120
160
200
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Technical Data 50Hz
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max. Current
in AMP at
400V
Insulation
Class
dB (A)
at 3m
RPM
APK 800 8P-3 1S 14378 760 IP54 Three Phase 8 50 1.83 F 54 630
APK 1000 12P-3 1S 23794 890 IP54 Three Phase 12 50 1.9 F 50 420
IP54 6 50 3.5 F 61 890 1900 2672 2 APK 800 6P-3 1S Three Phase
APK 900 12P-3 1S 18439 690 IP54 Three Phase 12 50 2.2 F 49 440
EAF B1-2














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
OAF B1-3,7; EAF 4F-1



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
OAF B1-3,7; EAF 4F-1














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B1-4



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B1-4
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B1-5,6,8,9
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B1-10
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B1-11














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B1-12



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B1-12
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF B1-13














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF B1-14



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF B1-14














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF 1F-1



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF 1F-1
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF 3F-1,4














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF 3F-2,3



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF 3F-2,3

Dimensions 50Hz

Propeller fan for wall or panel mounting to convey air directly to the
outside.

Sickle Blade impellers, in conjunction with the external rotor motors.

Wall plate is made of high grade galvanized sheet steel, with painted finish.

Statically and dynamically balanced to ISO 1940 standard.

Low noise level with high efficiency.

Accessories such as speed controller and mounting accessories can be
supplied upon request.

Performance of 710-1000 are not AMCA licensed.







Propeller Fans APK Series
Model A B D E F G H I J
Wt
(kg)
APK 315 4P-1 1S 400 330 320 365 10 - 149 68 82 7
APK 355 4P-1 1S 450 380 363 411 10 - 156 75 82 7.5
APK 400 4P-1 1S 500 420 410 464 10 12 200 78 122 9
APK 450 4P-1 1S 560 480 457 522 10 - 204 91 114 11.5
APK 500 4P-1 1S 630 560 512 572 10 13 201 97 104 16
APK 500 6P-1 1S 630 560 512 572 10 - 201 97 104 16
APK 560 6P-1 1S 710 630 570 649 10 - 213 99 114 21.5
APK 560 6P-3 1S 710 630 570 649 10 - 188 99 89 21.5
APK 630 4P-3 1S 800 710 640 730 12 25 182 103 79 24
APK 630 6P-3 1S 800 710 640 730 12 7 182 103 79 24
APK 710 6P-3 1S 900 800 720 810 12 11 207 92 115 27

Kruger Ventilation Industries
certifies that the APK series
shown herein is licensed to
bear the AMCA Seal. The
ratings shown are based on
tests and procedures
performed in accordance with
AMCA publication 211 and
comply with the requirements
of the AMCA Certified Ratings
Program.
315 - 710
1 PHASE 3 PHASE
Technical Data 50Hz
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max. Current in AMP
Insulation
Class
dB (A)
at 3m
RPM
230V 400V
APK 315 4P-1 1S 2048 120 IP54 Single Phase 4 50 0.53 - F 47 1400
APK 355 4P-1 1S 2768 120 IP54 Single Phase 4 50 0.55 - F 53 1400
APK 400 4P-1 1S 4870 290 IP54 Single Phase 4 50 1.2 - F 54 1360
APK 450 4P-1 1S 6516 380 IP54 Single Phase 4 50 2.0 - F 58 1370
APK 500 4P-1 1S 8752 850 IP54 Single Phase 4 50 3.8 - F 63 1350
APK 500 6P-1 1S 5785 310 IP54 Single Phase 6 50 1.3 - F 54 870
APK 560 6P-1 1S 8150 410 IP54 Single Phase 6 50 1.8 - F 55 820
APK 560 6P-3 1S 8366 450 IP54 Three Phase 6 50 - 0.9 F 55 860
APK 630 4P-3 1S 12272 1400 IP54 Three Phase 4 50 - 2.5 F 67 1330
APK 630 6P-3 1S 11423 740 IP54 Three Phase 6 50 - 1.5 F 57 880







A
B

E
F
G
H
I
J
J
H
APK 710 6P-3 1S 15145 1000 IP54 Three Phase 6 50 2.6 F 60 920 -
EAF T-1,2
Performance Data 50Hz
Dimensions 50Hz



































Propeller Fans APK Series





Model

A

B

D

E

F

H

M

Wt (kg)
APK 800 6P-3 1S

970

910

797

960

14.5

170

17

46
APK 800 8P-3 1S

970

910

797

960

14.5

170

17

45
APK 900 12P-3

1S

1070

1010

914

1115

14.5

210

22

55
APK 1000 12P-3 1S

1170

1110

1000

1140

14.5

210

22

61
















- Performance certified is for installation type A

Free inlet, Free outlet.

- Performance ratings do not include the effects of appurtenances (accessories).

- Speed (RPM) shown is nominal. Performance is based on actual speed of test.

S
t
a
t
i
c

P
r
e
s
s
u
r
e

(
P
a
)

Flow Rate (m/h)
0
40
80
120
160
0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000 26000 28000
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(
P
a
)

Flow Rate (m3/h)
800 -

1000

A
B

F
H
M
0
40
80
120
160
200
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Technical Data 50Hz
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max. Current
in AMP at
400V
Insulation
Class
dB (A)
at 3m
RPM
APK 800 8P-3 1S 14378 760 IP54 Three Phase 8 50 1.83 F 54 630
APK 1000 12P-3 1S 23794 890 IP54 Three Phase 12 50 1.9 F 50 420
IP54 6 50 3.5 F 61 890 1900 2672 2 APK 800 6P-3 1S Three Phase
APK 900 12P-3 1S 18439 690 IP54 Three Phase 12 50 2.2 F 49 440
EAF T-1,2
Dimensions
DWA series are designed for the
removal of odours and moisture from
toilets, bathrooms, small offices and
any small room requiring ventilation.
Fan casings and impellers are
manufactured from tough injection
moulded polypropylene, the front
grille from high quality ABS and the
neon indicators from polycarbonate.
Class II electrical insulation and
splash proof protection.
All motor are single phase, shaded
pole, 230V, 50Hz fitted with internal
thermal protection devise to protect
against abnormal overheating.
Max. working temp +40 C
Easy to install, aesthetically pleasing,
slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD No. 17 Tuas Avenue 10 Singapore 639141 Tel +65 68611577 Fax +65 68613577
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03
Edition 2
Printed on Apr 11
Slimline Axial Fan DWA Series
0
10
20
30
40
50
0 50 100 150 200
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
20
40
60
80
0 100 200 300
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
0
10
20
30
40
50
0 20 40 60 80 100
Flow rate ( m
3
/h )
S
t
a
t
i
c

P
r
e
s
s
u
r
e

(

P
a

)
DWA 100 DWA 200 DWA 300
Technical Data
Model
Hole
Opening
Max Q
m3/h
Power
W
Motor
N
Pole
Hz Voltage
dB (A)
at 3m
RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100
DWA 200 DWA300
Installation
Model A C D E
Wt
(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44
All Dimension in mm.
Hole Opening
Hole
Opening
A C
D
D
C
51
A
1
4
8

E
EAF 5F-1














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A

D
E F

Model A B C D E F
Wt
(kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.

All Dimensions in mm

APM Series is designed for direct wall-
mounting or panel-mounting.

Suitable for ventilation application where the
extraction of small volume of air at low
pressure is required, eg. cafes, bars, small
restaurants, commercial premises and small
workshops.
Complete with one piece bell mouth inlet and
mounting plate manufactured from pressed
galvanised steel with polyester painting finish.

Fitted with steel finger-proof guard as
standard mounted at the inlet side of fan.
5-bladed impeller manufactured from
galvanised steel sheet with epoxy-polyester
painting finish.

Incorporates single phase shaded pole
asynchronous induction motor and an auto
reset thermal overload protection device.
Supplied with a cable for connection
to electrical supply.
Max. operating temperature:
+40
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355:
+6 0 APM 400:
EAF 5F-2



Electrical Accessories

Electronic Single Phase Speed Controllers


- Available in Wall Box or Flush Mount versions.

- Fuse protected + spare fuses included.

- Radio interference protected.

- Minimum speed adjustment.

- Single ON/OFF and speed regulation control knob.

Type

Electrical


Supply

IP Prot.

Power
(VA)

Max.
Amp

Ins.
Cl

Operating
Temp.

Type

Hz

V

REB-1N

50

220-240

IP-44

220

1.0

II

0-40C

Wall Box

REB-1NE

50

220-240

IP-44

220

1.0

II

0-40C

Flush
Mounted


1
2
3
4
5
6
7
8
9
10
0
80 22 46

Performance

0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
S
t
a
t
i
c

P
r
e
s
s
u
r
e

P
s

(
P
a
)
Flow Rate Q (m3/h)
EAF 5F-2
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
T
H
G
T
CYLINDRICAL CASED AXIAL FLOW FANS
THGT Series
Adjustable Pitch F400-120, F300-120 and F200-120
Rated Fans
A P P L I C A T I O N S
Car Parks Industrial
kitchens
Officially approved
to EN12101-3
standard (cer-
tificate number
0370-CPD-0348)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0742)
Officially approved
to EN12101-3
standard (certifi-
cate number
0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased
axial flow fans designed for smoke extract in fire
conditions and certified F400-120, F300-120 and
F200-120 (CE marked).
Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised
finish for all models.
All models F400-120 except 2 poles incorporate
separate high grade die-cast aluminium blades
locked within an aluminium injected hub (diameters
from 400 to 630) or a pressed sheet steel hub.
(diameters from 710 to 1250).
F300-120 and F200-120 models incorporate an
aluminium injected hub (diameters from 400 to 800)
or a pressed sheet steel hub. (diameters from 900
to 1250).
2 POLES F400-120 model with aluminium impeller
/ hub formed from a one piece casting.
All models are available in both short and long
casing versions except 2 poles F400-120 model only
supplied with long casing.
Long casing versions (L) include an external terminal
box.
Suitable for horizontal or vertical mounting
installation.
Motors
Available, depending upon the model:
- with three phase motors in 4 or 6 poles.
- with three phase two speed motors, 4/8 or 6/12
poles.
F400-120 motors are IP55, class H insulation.
F300-120 motors are IP55, class H insulation.
F200-120 motors are IP55, class F insulation.
Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
Motors suitable for inverter control. In emergeny
operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
SPF R-1,2
T
H
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
THGT / TGT
Number of poles 4
Nominal diameter (mm) 900
Number of blades 6
THGT/4-900-6/_-_ kW
TGT/4-900-6/_-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommended
motor
power (kW)
Table of correction factors for the
calculation of the sound power
level spectrum.
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWG
Ps
Pa
151
SPF R-1,2
T
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT Series
Adjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
Workshops
Warehouses Commercial
premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
Pitch angle
173
OAF R-1,2
T
H
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
THGT / TGT
Number of poles 4
Nominal diameter (mm) 800
Number of blades 6
THGT/4-800-6/_-_ kW
TGT/4-800-6/_-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommended
motor
power (kW)
Table of correction factors for the
calculation of the sound power
level spectrum.
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWG
Ps
Pa
149
OAF R-1,2
T
G
T
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT Series
Adjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
Workshops
Warehouses Commercial
premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
Pitch angle
173
EAF R-1,2
C
y
l
i
n
d
r
i
c
a
l

c
a
s
e
d

a
x
i
a
l

f
l
o
w

f
a
n
s
T
H
G
T
A
B
C
0 5000 10000 15000 20000 25000 30000 Q (m
3
/h)
1 2 3 4 5 6 7 8 Q (m
3
/s)
0
5
10
15
20
25
30
35
40
45
50
55
60
mm.c.d.a
0
50
100
150
200
250
300
350
400
450
500
550
600
Pe (Pa)
8
14
16
18
20
24
22
26
283032
0 5000 10000 15000 20000 25000 30000 Q (m
3
/h)
0
500
1000
1500
2000
2500
3000
3500
4000
P
abs
(W)
0.75
1.1
1.5
2.2
3
4
Potencia
Motor(kW)
Recomendada
PotenciaAbsorbida(W)
32
30
28
26
24
22
20
18
16
14
12
10 8
92 91 91 93 93
93LwdB(A)
91
91 94
93
92
93 96 91
12 10
93
Nmero de polos 4
Dimetro nominal (mm) 710
Nmero de palas 6
THGT F300-F200/ TGT
Hz A B C
63 38 38 31
125
22 21 19
250
12 9 12
500 6 5 6
1000 5 5 5
2000 7 8 6
4000
13 14 11
8000
21 23 19
THGT F200-F300 / TGT
Table of correction factors for the
calculation of the sound power
level spectrum.
Number of poles 4
Nominal diameter (mm) 710
Number of blades 6
THGT/4-710-6/_-_ kW
TGT/4-710-6/_-_ kW
mmWG
Ps
Pa
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 6 5 6
1000 5 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
NEW
Only TGT, THGT F200 and F300
Q = Air volume in, m
3
/hr and m
3
/s.
Ps = Static pressure in mmWG and Pa.
Dry air at 20C and 760 mmHg.
Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THE
PERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).
TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Performance curves - 4 pole motors - THGT F200 - F300 / TGT
Absorbed power (W)
Recommended
motor
power (kW)
146
EAF R-1,2














































































Plate Mounted Axial Flow Fans APM Series






























Technical Data
Model
Max Q
m/h
Power
W
Motor
Protection
Motor
N
Pole
Hz
Max
Amp
Volt
Insulation
Class
dB (A)
at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230

* dB(A) at 3m measured at free discharge.

Dimension
B
A