This document provides specifications for a diesel generator set including:
- The prime and standby models are a P80P/B and P88E/B
- The generator set meets various quality standards including ISO8528 and has a 1500RPM 50Hz rating
- Key components include a Perkins 1104A-44TG2 diesel engine and Stamford or Leroy Somer alternator
- The generator set has a 70.4kW standby and 64kW prime power rating and includes standard protection and control systems
This document provides specifications for a diesel generator set including:
- The prime and standby models are a P80P/B and P88E/B
- The generator set meets various quality standards including ISO8528 and has a 1500RPM 50Hz rating
- Key components include a Perkins 1104A-44TG2 diesel engine and Stamford or Leroy Somer alternator
- The generator set has a 70.4kW standby and 64kW prime power rating and includes standard protection and control systems
This document provides specifications for a diesel generator set including:
- The prime and standby models are a P80P/B and P88E/B
- The generator set meets various quality standards including ISO8528 and has a 1500RPM 50Hz rating
- Key components include a Perkins 1104A-44TG2 diesel engine and Stamford or Leroy Somer alternator
- The generator set has a 70.4kW standby and 64kW prime power rating and includes standard protection and control systems
This document provides specifications for a diesel generator set including:
- The prime and standby models are a P80P/B and P88E/B
- The generator set meets various quality standards including ISO8528 and has a 1500RPM 50Hz rating
- Key components include a Perkins 1104A-44TG2 diesel engine and Stamford or Leroy Somer alternator
- The generator set has a 70.4kW standby and 64kW prime power rating and includes standard protection and control systems
QUALITY STANDARDS The SUPERWATT generator set compliance with all main standards, such as ISO8528 GB/T2820-97), GB755 BS5000, VDE0530, ISO3046, IEC34-1, CSA22-2, AS1359, ISO14001.
1500RPM 50Hz
Standby:
kW k VA
70.4 88
Prime:
kW k VA
64 80
Diesel engine and alternator OEM authorization certificate
and their quality assurance. Other standards and certifications can be considered on request. ASSEMBLY The engine and alternator are close coupled by means of an SAE flange . A full torsional analysis has been carried out to guarantee no harmful vibration will occur Anti-vibration pads are affixed between engine alternator feet and the baseframe. Thus ensuring complete vibration isolation of the rotating assemblies and enabling the machine to be placed on an uneven surface without any detrimental effects. For durability and corrosion resistance, all iron and steel surfaces of canopy fabrications have been treated for coating by grit blast cleaning. Then covered by a polyester powder paint which provides an excellent corrosion resistant surface. CONTROL SYSTEM AND PROTECTION Controllers are available for all applications. The controller system is used to start and stop the engine , indicate electric date and protect the generator set.See controller features inside. The revolving parts are covered by safety net , and the place which easy to scald and got an electric shock all to have the obvious warning slogan
The picture only for reference
WARRANTY
ALTERNATOR RATINGS Alternator Model
UCI224G(STAMFORD) 50Hz
Frequency and Speed
SUPERWATT Company provides one-source responsibility for
the generator set and accessories.
LSA43.2 L8(LEROY SOMER)
1500rpm
50Hz
Each SUPERWATT generating set has been got through 2 hours
load test for running 0%,25%,50%,75%,100% and 110% load, all protective devices and control function are stimulated and checked before dispatch. All equipment is guaranteed for the period of 1000 hours or 12 mouths from the date of commissioning or 18 months from shipping, whichever occurs first.
1500rpm
Prime Power Data
Class-TEMP Rise( )
Cont.H -125K/40
Cont.H -125K/40
Voltage series star
380
400
415
440
380
400
415
440
Voltage parallel star
190
200
208
220
190
200
208
220
Voltage series delta
220
230
240
254
220
230
240
N/A
Rating capacity(kVA)
85.0
85.0
85.0
75.0
78.0
80.0
80.0
76.0
Rating power(kW)
68.0
68.0
68.0
60.0
62.0
64.0
63.0
61.0
Power efficiency(%)
89.8
90.2
90.4
90.8
90.5
90.5
90.5
90.5
Input power(kW)
75.7
75.4
75.2
69.6
68.5
70.7
69.6
67.4
Standby Power Data
Class-TEMP Rise( )
Standby.H -125K/40
Standby.H -150K/40
Voltage series star
380
400
415
440
380
400
415
Voltage parallel star
190
200
208
220
190
200
208
220
Voltage series delta
220
230
240
254
220
230
240
N/A
Rating capacity(kVA)
87.5
87.5
87.5
76.9
83.0
84.0
83.0
83.0
Rating power(kW)
70.0
70.0
70.0
61.5
66.0
67.0
66.0
66.0
Power efficiency(%)
89.7
90.1
90.3
90.7
90.1
90.1
90.1
90.1
Input power(kW)
78.0
77.7
77.5
71.4
73.3
74.4
73.3
73.3
440
Convenience for operation and maintenance, backed by
PERKINS ,NEWAGE(CUMMINS) and LEROY SOMER global service network.
RATINGS: All three-phase units are rated at 0.8 power factor. Standby ratings : Standby ratings apply to installations served by a reliable utility source. The standby rating is for this rating. Ratings are in according with ISO-3046/1,BS 5514 ,AS 2789 , and DIN 6271. Prime Power Ratings: Prime power ratings apply to installations where utility power is unavailable or unreliable. At varying load, the number of generator set operating hours is unlimited. A 10% overload capacity is available for one hour in twelve. Ratings are in accordance with IS0-8528/1, overload capacity in accordance with ISO-3046/1,BS 5514, AS 2789, and DIN 6271. For limited running time and base load ratings, consult the factory. The generator set manufacturer reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. GENERAL GUIDELINES FOR DERATION: Altitude: Derate 2.0% per 300m(984 ft.) elevation above 1000m(3279 ft.) up to a maximum elevation of 2450m(8000 ft.).More than 2450m(8000ft), please contacts with us or our dealer seek the help. Temperature: Derate 6.0% per 11 (20 ) temperature above 40 (104 ).
ALTERNATOR 1500RPM 50Hz
Specification
Stator winding Winding pitch Winding leads Maximum overspeed
Altitude
1.5% Class H IP23
The 2/3 pitch design avoids excessive neutral currents. With the 2/3 pitch and carefully selected pole and tooth designs, ensuresvery low waveform distortion.
0.8 Double layer concentric
Brushless alternator with brushless pilot exciter for excellent
load response.
Two thirds 12
The insulation system is class H, easy paralleling with mains or
other generators, standard 2/3 pitch stator windings avoid excessive neutral currents.
2250 Rev/min Self excited machines do not sustain a short circuit current
Sustained short circuit
Waveform distortion
Brushless, Self excited
Solid State, Volts/Hz
Alternators meet the requirement of BS EN 60034 and the
relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSAC22.2-100, As1359, and other standards and certifications can be considered on request.
4-Pole, Rotating Field
Type Exciter type Voltage regulator Voltage regulation Insulation Protection Rated power factor
Backed by worldwide service network
No load < 1.5%
Non-distorting balanced linear load < 5.0% 1000 m
DIESEL ENGINE 1104A-44TG2 diesel engines are manufactured by Perkins Engines Company Limited(UK).
Diameter Drive ratio Number of blades Material Type
457 mm (18 in)
1.25 : 1 7 Composite Pusher
Coolant
1500RPM 50Hz
Total system capacity
with radiator without radiator Drain down capacity
13.0 litres (27.4 UK pints)
7.0 litres (14.7 UK pints) TBA litres ( UK pints)
The DSE704 is an Automatic Mains Failure module with generator
monitoring, protection and start facilities. It utilises advanced surface mount construction techniques to provide a compact yet highly specified module. This model can start the unit automatically when the MAINS failure and than control the ATS turn to the genset side. Operation of the module is via three pushbuttons mounted on the front panel with STOP, MANUAL and AUTO positions. Panel introduction: Indicator type frequency, voltmeter and ampere meter demonstration unit's electrical parameter. The voltage change-over switch and the rheotrope uses for to choose the different phase voltage and current to display. The oil pressure gauge, coolant temperature gauge and the battery voltage gauge. The controller. Preheating button.
110
(230 )
Protection:
TBA TBA
( ) ( )
Maximum top tank temperature
Minimum temperature to engine Temperature rise across engine Max permissible external system resistance
TBAkPa( lbf/in2 ) Thermostat operation range 75 - 87 (167 - 189 ) Recommended coolant: 50% ethylene glycol with a corrosion inhibitor (BS 6580 :1992 or ASTM D3306-89 or AS2108) and 50% clean fresh water.
CONTROLLERS
Over Speed Shutdown.
Low Oil Pressure Shutdown. High Engine Temp Shutdown. Charger failure alarm. Mains failure alarm. Optional Under speed Protection. DC Supply: 8 to 35 V Continuous.
PCRC210/220 INTELLIGENT CONTROL SYSTEM
(Optional)
DSE 702 MANUAL CONTROLLER(Standard)
The controller made in Turkey Comap genset controller
The controller made in UK
Control panel for soundproof
The AMF25 is an Automatic Mains Failure module with generator
monitoring, protection and start facilities. The controller has a large LCD screen, display the generator's each parameter, running and alarm information. The off/replacement button, mode switch button , start/stop button and the LED indicator light, makes the user easy to operate and maintain the generator.
DEEPSEA genset controller
Control panel for open style
The Model 702 is a Manual Engine Control Module designed to
control the engine via a key switch and pushbuttons on the front panel. The module is used to start and stop the engine and indicate fault conditions, automatically shutting down the engine and indicating the engine failure by LED, giving true, first up fault annunciation.
Panel introduction: Indicator or digital type frequency, voltmeter and ampere meter demonstration unit's electrical parameter. The big red button uses for the operator to stop the genset peremptorily The controller.
Panel introduction: Indicator type frequency, voltmeter and ampere meter demonstration unit's electrical parameter. The voltage change-over switch and the rheotrope uses for to choose the different phase voltage and current to display. The big red button uses for the operator to stop the genset peremptorily The oil pressure gauge, coolant temperature gauge and the battery voltage gauge. The controller. And an integral anti-tamper LCD hours run counter is also provided. If the customer needs to use the preheating function, we will be able to increase the preheating button. Protection: Low Oil Pressure High Engine Temperature Auxiliary Shutdown Over speed
Function: Communication: RS232 connection, uses the industry rank MODBUS protocol can easily communicate with others intelligence control system. Display function: LCD screen can display the generator's parameter and the control system's running information. Set up parameter: Engineer can set up the controller parameter from the control panel or through the PC, 6 programmable fan-out may satisfy the user each kind of demand. Protection: The control system can protect the generator set , manage each kind of electrical failure. Control Function of ATS. DC Supply: 8 to 35 V Continuous. NOTE: More functions or please refer to website www.genset.cn. Extra demand please contacts our sales engineer.
DC Supply: 8 to 35 V Continuous.
Standard Features and Accessories
Standard Features
Paralleling System
Battery, Battery Rack and Battery Cables
Reactive Droop Compensator
Integral Vibration Isolation
Voltage Adjust Control
Oil Drain Extension
Voltage Regulator Relocation Kit
Controller System
Air cleaner ,Heavy Duty
3 Pole Circuit Breaker
Common Failure Relay Kit
Heavy duty industrial type exhaust silencer
with flexible pipe(supplied loose).
Customer Connection Kit(Except Open Style)
Communications Products and PC Software
Maintenance and Literature
Engine Pre-alarm Sender Kit
General Maintenance Literature Kit
Remote Annunciator Panel
Test Certificate and design paper
Remote Audiovisual Alarm Panel
Quality certificate and Maintenance card
Remote Emergency Stop Kit
PCRC series control system, with RS232 or RS485 communication connection and communication agreement.
Accessories Enclosed Unit
Miscellaneous Accessories
Sound Enclosure Weather Enclosure (with enclosed critical silencer) Weather Housing (with roof-mounted critical silencer) Trailer(Causes the genset easily to move)
Open Unit Exhaust Silencer, Critical kit
Dimensions and Weights
Flexible Exhaust Connector, Stainless Steel
Open Style
Cooling System Block Heater (recommended for ambient temperatures below 0
Overall Size, L W H )
mm
2240 730
Weight(radiator model),net,Kg
1470
1080
Radiator Duct Flange
Remote Radiator Cooling
Fuel System Auxiliary Fuel Pump
Flexible Fuel Lines
Mechanical dipstick or fuel level sensor Subbase Fuel Tank with Day Tank
Fuel fill cap with breather
10 hours running tank
Soundproof Style
Automatic fuel--providing device
Overall Size, L W H
Hand primer pump
Weight(radiator model),net,Kg
mm
2480 1120 1830
1530
Electrical System Battery Charger, Equalize/Float Type
Engine and Alternator
3 or 4 Pole Circuit Breaker with Shunt Trip Fuel/Water Separator Oil Preheater Air Preheater
NOTE : This drawing is provided for reference only and should not be used for planning installation. Contact your local distributor for more detailed information.
Alternator Strip Heater
Maintenance and Literature
DISTRIBUTED BY:
Maintenance Kit (includes air, oil, and fuel filters)
