Catalog Alfain
Catalog Alfain
www.alfain.eu
CONTENTS
OVERVIEW OF FUNCTIONS
4 5 7 9 10 12 13 17 18 19
MMA INVERTERS
PEGAS, ALFIN
TIG INVERTERS
AC/DC INVERTERS
ALFIN AC/DC
MULTIFUNCTION INVERTERS
ALFIN MF, ALFIN MPK
CHOPPERS
A CHOPPER
PULSE
PLASMA
OVERVIEW OF FUNCTIONS
1 x 230 V power supply. Synergic mode can be used for pulse welding as well.
Water-cooling unit.
The machine is designed for MIG/MAG welding using fillerwire and shielding gas also known as CO2 welding.
The HOTSTART function facilitates the arc ignition by using high starting current for a predefined period of time. The ARCFORCE technology automatically levels voltage fluctuations in the arc caused by the movement of welders hand. The ANTISTICK technology prevents the electrode from sticking to the weld-piece.
The BILEVEL technology allows the welder to switch between two predefined currents during welding. The LIFT ARC technology enables easy arc ignition by switching on the torch while it touches the weld-piece and then lifting it.
Adjustable starting speed of the wire feeder allows easier arc ignition and beginning of welding.
Adjustable slope-up time from the starting current to the working current.
Thermal protection that switches the machine off when overheating occurs.
Contact arc ignition by touching the weld-piece with the tungsten electrode.
The machine is equipped with a memory to store your preferred parameters for various welding tasks (jobs).
Synergic mode allows you to set a single parameter and the machine calculates all other parameters accordingly.
OVERVIEW OF FUNCTIONS
PEGAS 130 E PEGAS 160 E PEGAS 200 E PEGAS 250 E PEGAS 250 E CEL
FEATURES
IGBT technology Compact, lightweight, portable ANTISTICK, ARCFORCE, HOT-START Protected and POWER GENERATOR compatible Cable connectors 35-50 mm2 (PEGAS 130 10-25mm2). PEGAS 250 E CEL welds also with cellulose coated electrodes
FUNCTIONS
PEGAS 130 E PEGAS 160 E PEGAS 200 E PEGAS 250 E PEGAS 250 E CEL
X X
X X X
X X X
TECHNICAL DATA
Machine type Mains voltage Mains protection Effectivity Max. input current Max. input power Open circuit voltage Welding current range Duty cycle 100% - 40C/10 min. Duty cycle 100% - 25C/10 min. Max. duty cycle - 40C/10 min. Max. duty cycle - 25C/10 min. Insulation class Protection rating Construction norms Dimensions (W x L x H) Weight Electrode diameter Electrode type PEGAS 130 E
1x230V~ / 50-60Hz
PEGAS 160 E
1x230V~ / 50-60Hz
PEGAS 200 E
1x230V~ / 50-60Hz
PEGAS 250 E
3x400V~ / 50-60Hz
16A DELAYED > 80% 27,0A 3,6kW 66V 5-130A 50A 80A 20% 35% F IP23 EN60974-1 120 x 280 x 220 4kg
2.5, 3.2
16A DELAYED > 80% 31,0A 5,0kW 62V 5-160A 80A 110A 25% 35% F IP23 EN60974-1 140 x 310 x 230 mm 6 kg
2.5, 3.2, 4.0
16A DELAYED > 80% 37,5A 6,6kW 63,6V 5-200A 100A 130A 25% 35% F IP23 EN60974-1 140 x 345 x 230 7,5 kg
2.5, 3.2, 4.0
16A DELAYED > 84% 16,5 A 66 V 10 - 250 A 160 A 200 A F IP23 EN60974-1 490 x 240 x 400 mm 22 kg
2.5, 3.2, 4.0, 5.0
16A DELAYED 84% 17A 90V 10 250A 200A 250A F IP 23 EN60974-1 490 x 240 x 400 mm 22 kg
2.5, 3.2, 4.0, 5.0
6013, 7018,
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
CASE
REMOTE CONTROL
MMA INVERTERS
ALFIN 150 TP
ALFIN 160/200
IGBT technology ANTISTICK, ARC-FORCE, HOT-START Welding inverter for MMA and TIG LIFT ARC welding TP - TOTAL PROTECTION (ALFIN 150 TP)
FUNCTIONS
1x 230 V
ONE-PHASE 2 3 0 VOLT POW ERED
ALFIN 250
3x 400 V
f1 f2
MMA TIG
LIFT ARC
DC
HOTSTART
STOP
INVERTER
ARCFORCE
ANTISTICK
THERM AL PROTECTION
PORTABLE
REMOTE CONTROL
X X
X X
TECHNICAL DATA
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
REMOTE CONTROL
TRANSFORM. VALVE
MMA INVERTERS
ALFIN 150 TIG HF ALFIN 170 TIG HF ALFIN 200 TIG HF PEGAS 160 T HF PEGAS 200 T HF
FEATURES
FUNCTIONS
1x 230 V ONE-PHASE 230 VOLT POWERED 3x 400 V THREE-PHASE 400 VOLT POWERED TIG
HF
f1 f2
DC
JOB
JOB STORE REMOTE CONTROL
HOTSTART
ARCFORCE
ANTISTICK
PORTABLE
PULSE
SYNERGIC PULSE
ALFIN 150 TIG HF ALFIN 170 TIG HF ALFIN 200 TIG HF PEGAS 160 T HF PEGAS 200 T HF
X X
X X
X X
X X X X
X X X X X
X X
TECHNICAL DATA
Machine type Welding current range Input voltage Mains protection Effectivity Welding method Duty cykle Max. input power Max. input current Welding current Working voltage Open circuit voltage Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) Weight Machine type Welding current range Input voltage Mains protection Effectivity Welding method Duty cykle Max. input power Welding current Open circuit voltage Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) Weight 160A 25% 3,3 kW 80A 58 V F IP 23 AF EN60974-1 130 x 450 x 230 mm 6,5 kg 160A MMA 100% 25% 5,3 kW 80A 170A 35% 5,6KVA 24,3A 140A 25,6V 94V H IP23 AF EN 60974-1/-10 120 x 360 x 215 mm 5,4Kg PEGAS 160 T HF 5-160A 1x230V~ / 50-60Hz 16A DELAYED > 80% TIG 100% 30% 4,6 kW 100A 62 V F IP 23 AF EN60974-1 130 x 450 x 230 mm 8 kg 200A MMA 100% 25% 5,4 kW 100A MMA 100% 3,9KVA 17,0A 100A 24,0V 35% 4,1KVA 17,8A 150A 16,0V 10V ALFIN 150 TIG HF 5 - 150A 1 x 230V~ / 50-60Hz 16A DELAYED 0,85 TIG 100% 2,5KVA 10,9A 100A 14,0V 40% 5,1KVA 22,4A 170A 16,8V 14V H IP 23 AF EN 609741 160 x 400 x 260 mm 10 Kg PEGAS 200 T HF 5-170A (200A TIG) 1x230V~ / 50-60Hz 16A DELAYED > 80% TIG 100% TIG 100% 3,4KVA 15A 120A 14,8V 40% 6,3KVA 27,8A 140A 25,6V 65V ALFIN 170 TIG HF 5 170A 1x230V~ / 50-60Hz 16A DELAYED 0,85 MMA 100% 5KVA 21,8A 120A 24,8V 40% 200A 18V 14V H IP 23 AF EN 609741 160 x 400 x 260 mm 10 Kg TIG 100% 130A 15,2V 40% 10KVA 14,5A 200A 28V 65V ALFIN 200 TIG HF 5 200A 3x400V~ / 50-60Hz 10A DELAYED 0,85 MMA 100% 6,2KVA 9A 130A 25,2V
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
CASE
TRANSFORM. VALVE
TIG INVERTERS
ALFIN 202 TIG HF ALFIN 250 TIG HF ALFIN 281 W TIG HF Synergy
FEATURES
Welding inverter for TIG and MMA welding. TIG pulse Two currents - BILEVEL Synergic pulse 50 memory positions
FUNCTIONS
1x 230 V ONE-PHAS E 230 VOLT POWER E D 3x 400 V T HREE -PHAS E EE400 VOLT POW POWE RED TIG
f1 f2
INVER TER
DC
S YNE RGY
S TO P
JOB
JOB STOR E R E MOT E CONTR OL
HOTS TAR T
AR C FOR C E
ANT IS T ICK
PULSE
X X
X X
X X
TECHNICAL DATA
Machine type Welding current range Input voltage Mains protection Effectivity Welding method Duty cykle Max. input power Max. input current Welding current Working voltage Open circuit voltage Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) Weight 60% 5,3KVA 180A 17,2V 11V H IP 23 AF EN 609741 230 x 460 x 3251 mm 15 Kg TIG 100% 4,5KVA 160A 16,4V 65% 6,5KVA 150A 26V 84V ALFIN 202 TIG HF 5 200A 1x230V~ / 50-60Hz 25A DELAYED 0,85 MMA 100% 5,0KVA 120A 24,8V 60% 8,4KVA 12,2A 250A 20V 9V H IP 23S AF EN 609741 230 x 460 x 325 mm 19 Kg TIG 100% 6,7KVA 9,4A 210A 18,4V 60% 9,9KVA 14,3A 230A 29,2V 76V ALFIN 250 TIG HF 5 250A 3x400V~ / 50-60Hz 16A DELAYED 0,85 MMA 100% 8,4KVA 12,3A 200A 28V 280A 21,2V 9V H IP 23 AF EN 609741 230 x 530 x 325 mm 20 Kg 50% 9,6KVA 14A 200A 18V 250A 30V 76V TIG 100% 5,8KVA 40% 12,1KVA 17,5A 160A 26,4V ALFIN 281 W TIG HF 5 280A 3x400V~ / 50-60Hz 20A DELAYED 0,85 MMA 100% 7,3KVA
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
REMOTE CONTROL
TRANSFORM. VALVE
TROLLY
COLLING UNIT
TIG INVERTERS
ALFIN 200 AC/DC ALFIN 220 AC/DC ALFIN 280 AC/DC ALFIN 281 AC/DC
FEATURES
Welding inverter for welding steel, stainless steel and aluminium by TIG AC/DC and MMA methods. TIG pulse BILEVEL - two currents IGBT technology Remote control
FUNCTIONS
1x 230 V
ONE-PHASE 2 3 0 VOLT POW ERED
3x 400 V
THREE-PHASE 4 0 0 VOLT POW ERED
HF
TIG HIGH FREQUENCY IGNITION
f1 f2
INVERTER
AC/ DC
TIG ALUMINIUM W ELDING
HOTSTART
SYNERGY
STOP
JOB
AC PULSE
ARCFORCE
ANTISTICK
THERMAL PROTECTION
PULSE
SYNERGIC PULSE
JOB STORE
W ATER COOLIN G
ALFIN 200 AC/DC ALFIN 220 AC/DC ALFIN 280 AC/DC ALFIN 281 AC/DC
X X
X X
TECHNICAL DATA
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
REMOTE CONTROL
TRANSFORM. VALVE
AC/DC INVERTERS
PEGAS 160 MIG MAN PEGAS 160 MIG SYN ALFIN 161 MTM
FEATURES
IGBT technology Compact, lightweight, portable digital control system, real-time display welding parameter by PEGAS 160 MIG synergic control welding current/voltage (mig) by PEGAS 160 MIG SYN High performance multiprocess power source (MMA/MIG/MAG/Lift Tig) MAG welding with self-shielding wire Welds with electrodes up to diameter of 4,0 mm PEGAS 160 MIG
FUNCTIONS
TECHNICAL DATA
Units Method Mains voltage Mains protection Max. input power I1 Max. effective current I1eff Welding current range Open-circuit voltage U20 Welding current (DC=100%) I2 /U2 Welding current (DC=60%) I2/U2 Welding current (DC=x%) I2/U2 Power factor cos Insulation class Protection Standards Dimensions (w x l x h) generator Weight - compact/generator Wire speed MIG/MAG V/Hz A A A A/V V A/V A/V A/V PEGAS 160 MIG MMA 1x230/50-60 16 deayed 33,3 18,2 10/20,4 - 160/26,4 58 90/23,6 115/24,6 30%=160/26,4 0,83 F IP 23 EN 60974-1 470x210x380 11,5 TIG ALFIN 161 MTM MMA TIG 1x230/50-60 16 deayed 27 16 20/15 - 160/22 5/20 - 140/25,6 5/10 - 140/15,6 10 91 10 110/16,5 100/24 100/14 MIG/MAG 35%=160/22 35%=140/26,5 0,9 H IP 23 EN 60974-1 230 x 460 x 325 12 0,5 - 16 35%=140/15,6
mm kg m/min
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
TRANSFORM. VALVE
10
MULTIFUNCTION INVERTERS
ALFIN 250 MPK ALFIN 250 MPK industry ALFIN 251 MTM
FEATURES
Synergic multifunction welding machines for MIG/MAG, MMA and TIG welding. MIG/MAG 12 synergic pre-set programs Manual mode for custom setting SOFT START Electronic choke Voltage correction 2V
FUNCTIONS
TECHNICAL DATA
RECOMMENDED ACCESSORIES
HELMET
TIG TORCH
CABLES
TRANSFORM. VALVE
MULTIFUNCTION INVERTERS
11
MIG/MAG
CONTROL BOARDS
Feature A + V meter Wire initial speed (Soft Start) Advice of the parameter settings Electronic feedback of the wire speed 2 stoke / 4 stroke Adjustable post and pre-gas time Spot and seam welding Adjustable burn-back time UP-DOWN torch support
B ASI C
M I N OR 2
M AJOR
x x
x x x x
x x x
SYN ER GY
MIG/MAG FEEDERS
TWO-ROLL FEEDER
Standard in ABC and ALF machines.
FOUR-ROLL FEEDER
PS 2(W) 2-roll
a b
PS 4(W) 4-roll
a = 22 mm b = 30 mm Tube wire
0.6 - 2.4 mm
0.8 - 2.0 mm
0.8 - 2.4 mm
12
FUNCTIONS
ABC 164 HD
B ASI C
M I N OR 2
M AJOR
SYN ER GY
TECHNICAL DATA
ENGLISH Method Mains voltage Mains protection Max. input power I1 Max. effective current I1eff Power factor cos Welding current range Open-circuit voltage U20 Welding current (DC=100%) I2 /U2 Welding current (DC=60%) I2 /U2 Welding current (DC=x%) I2 /U2 Voltage steps Insulation class Protection Standards Dimensions (w x l x h) Weight Wire speed Spool diameter Spool weight Jednotky V/Hz A A A A/V V A/V A/V A/V ABC 155 MIG/MAG 1 x 230/50 1600% 21 980% 0,9 20/15,0 - 160/22,0 22,0 - 42,5 55/16,8 80/18,0 15%=160/22,0 6 F IP 21 SN EN 60974-1 350 x 750 x 620 4100% 1 - 16 max. 300 mm Spulegewicht ABC 164 HD MIG/MAG 1 x 230/50 1600% 21 980% 0,9 20/15,0 160/22,0 22,0 42,5 55/16,8 80/18,0 20%=160/22,0 6 F IP21 EN 60 974-1 470 x 800 x 650 48 (without torch) 1 - 16 max. 300 mm kg
mm kg m/min mm kg
RECOMMENDED ACCESSORIES
HELMET
TRANSFORM. VALVE
13
FUNCTIONS
3x 400 V
MIG/MAG THREE-PHASE 400 VOLT POWERED STEP-SWITCHED VOLTAGE
Cu
ALL-COPPER TRANSFORMER
BURN BACK
ADJUSTABLE BURN BACK TIME
SPOT
SPOT AND INTERVAL WELDING
2T 4T
2-STROKE 4-STROKE PRE-GAS AND POST-GAS
SOFT START
ADJUSTABLE INITIAL WIRE SPEED ELECTRONIC FEEDBACK
TECHNICAL DATA
RECOMMENDED ACCESSORIES
HELMET
TRANSFORM. VALVE
14
FUNCTIONS
3x 400 V
MIG/MAG THREE-PHASE 400 VOLT POWERED
Cu
BURN BACK
SPOT
SPOT AND INTERVAL WELDING
2T 4T
2-STROKE 4-STROKE PRE-GAS AND POST-GAS
SOFT START
ADJUSTABLE INITIAL WIRE SPEED ELECTRONIC FEEDBACK
RESET
REMOTE CONTROL
B ASI C
M I N OR 2
M AJOR
SYN ER GY
TECHNICAL DATA
Machine type Mains voltage Mains protection Power factor cos Welding current range Voltage steps Welding method Duty cycle Welding current Working voltage Max.input power Max.input current Open-circuit voltage Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) compact Dimensions (W x L x H) separate Weight
30% 250A 26,5V 12,1kVA 17,5A
ALF 250 HD 3x400V / 50Hz 16A DELAYED 0,85 40A 250A 1x10 MIG
60% 200A 24,0V 8,6kVA 12,4A 100% 170A 22,5V 6,4kVA 9,3A 20% 280A 28,0V 10,2KVA 14,7A
ALF 280 HD 3x400V / 50Hz 16A DELAYED 0,9 40A 280A 1x10 MIG
60% 210A 24,5V 6,7KVA 9,7A 100% 170A 22,5V 5,0KVA 7,2A 30% 320A 30,0V 11,8KVA 17,1A
ALF 320 HD 3x400V / 50Hz 25A DELAYED 0,9 40A 320A 1x12 MIG
60% 240A 26,0V 10,0KVA 14,0A 100% 190A 23,5V 5,8KVA 7,9A 30% 400A 34,0V
ALF 400 HD 3x400V / 50Hz 25A DELAYED 0,9 40A 400A 2x10 MIG
60% 320A 30,0V 12,4KVA 18,0A 100% 260A 27,0V 9,5KVA 13,6A
16,7KVA 24,2A
19,4 - 45,5V H IP 21 AF EN 609741 504 x 870 x 777 mm is not produced anymore 75kg
18,5V 43,9V H IP 21 AF EN 609741 504 x 870 x 777 mm 504 x 870 x 1334 mm 93Kg
19,9V 46,6V H IP 21 AF EN 609741 504 x 870 x 777 mm 504 x 870 x 1334 mm 101Kg
RECOMMENDED ACCESSORIES
HELMET
TRANSFORM. VALVE
15
FUNCTIONS
3x 400 V
MIG/MAG THREE-PHASE 400 VOLT POWERED
Cu
BURN BACK
SPOT
SPOT AND INTERVAL WELDING
2T 4T
2-STROKE 4-STROKE PRE-GAS AND POST-GAS
SOFT START
ADJUSTABLE INITIAL WIRE SPEED ELECTRONIC FEEDBACK
RESET
REMOTE CONTROL
WATER COOLING
B ASI C
M I N OR 2
M AJOR
SYN ER GY
TECHNICAL DATA
RECOMMENDED ACCESSORIES
HELMET
TRANSFORM. VALVE
16
FUNCTIONS
SYN
M IG/ M AG SYNERGY
JOB
JOB STORE
BURN BACK
ADJUSTABLE ELECTRON IC FEEDBACK BURN BACK TIM E RESET MMA AN TISTICK HOTSTART ARCFORCE
THERM AL PROTECTION
TECHNICAL DATA
Machine type Input voltage Mains protection Power factor cos Welding method Duty cycle Welding current Working voltage Open circuit voltage Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) Weight (Set) F IP 23 AF EN 609741 504 x 870 x 777 mm 110 Kg 50% 350A 15,8-31,5V A 300 CHOPPER 3x400V~ / 50-60Hz 25A DELAYED 0,95 MIG/MAG - MMA 100% 250A 15,8-31,5V 50% 400A 15,8-34 V 64V F IP 23 AF EN 609741 640 x 920 x 1406 mm 165 Kg A 400 CHOPPER 3x400V~ / 50-60Hz 25A DELAYED 0,95 MIG/MAG - MMA 100% 310A 15,8-34 V 50% 500A 15,8-39 V 64V F IP 23 AF EN 609741 640 x 920 x 1406 mm 180 Kg A 500 CHOPPER 3x400V~ / 50-60Hz 35A DELAYED 0,95 MIG/MAG - MMA 100% 410A 15,8-39 V
RECOMMENDED ACCESSORIES
HELMET
REMOTE CONTROL
TRANSFORM. VALVE
PUSH-PULL FEEDER
CHOPPERS
17
ATA 350 PULS 2 MOBIL aXe 400 double pulse aXe 500 double pulse
FEATURES
Pulsed synergic welding inverter for MIG/MAG, MMA, TIG LA welding, gauging MIG/MAG welding of aluminium, stainless steel, MIG brazing of zinc-coated steel and stainless steel. Full digital control. User interface in 7 national languages. Double pulse (pulse in pulse) Job store - 10 memory banks, 10 jobs each. UP-DOWN remote control on torch. Cooling unit. Cooling pump and ventilators eco-mode. Coated electrode welding on customers request ROBO INTERFACE - possibility of the interface adding for the robot connection double pulse 400/500 ATA 350 PULS 2 MOBIL
FUNCTIONS
TECHNICAL DATA
ENGLISH Method Mains voltage Mains protection Max. input power I1 Max. effective current I1eff Welding current range Open-circuit voltage U20 Welding current (DC=100%) I2 /U2 Welding current (DC=60%) I2/U2 Welding current (DC=x%) I2/U2 Power factor cos Insulation class Protection Standards Dimensions (w x l x h) generator Weight - compact/generator Wire speed Spool diameter Spool weight Dimensions (w x l x h) feeder Weight - feeder Cooling power (Q=1l/min) Total liquid content Max. pressure Max. flow Units V/Hz A A A A/V V A/V A/V A/V
ATA 350 PULS 2 MOBIL
MIG/MAG 3x400/50-60 16 deayed 21,8 25/15,2 - 320/30 81 250/15,5 270/18,2 35%=320/21,8 0,99 F IP 23 EN 60974-1 340 x 745 x 498 35 0,1-25 300 18
MIG/MAG
26,7 26,7
TIG
MIG/MAG
22,5 22,5
31,7 26,7
TIG
33 23,3
20/15V - 500/39
5/10,2 - 500/30,3
20/15V - 500/39
5/10,2 - 500/30,3
83 400/36,4 450/38 500/40 0,99 IP 23 H EN 60974-1 568x853x1048 115/100 1 - 20 300 18 263x690x498 25 0,77 4 3,5 8
83 400/36,4 450/38 500/40 0,99 IP 23 H EN 60974-1 568x853x1048 105/100 1 - 20 300 18 263x690x498 25 0,77 4 3,5 8
4 3,5 9
RECOMMENDED ACCESSORIES
HELMET
REMOTE CONTROL
TRANSFORM. VALVE
18
PULSE
CUTMASTER 10, 12, 20 CUTMASTER 25, 35, 40 APC-IN 35, 45 APC 30-75
FEATURES
CUTMASTER, APC-IN 35 a 45 IGBT technology Contactless ignition Continuous voltage regulation APC 30-75 Voltage regulation in steps HF ignition
CUTMASTER 10
CUTMASTER 12 - 40
TECHNICAL DATA
Model Cut Capacity genuine (mm) Cut Capacity max (mm) Severance (mm) Output Corrent Amps Input Power Duty Cycle Dimensions (mm) Weight (kg) Ship Weight (kg) Torch Lead Length (m) Gas Suitable Materials Typical Applications Machine type Input voltage Mains protection Effectivity Duty cycle Max. input current Max. effective current Cutting current Cutting voltage Open circuit voltage Air pressure Material thickness Insulation class Protection rating Cooling Construction norms Dimensions (W x L x H) Weight 60% 24A 5,5KVA 35A 94V 14V 5bar 10 12mm H IP 23 AF EN 609741 160 x 400 x 260mm 9,5 Kg + 1,2 Kg torch Cutmaster 10 10 12 16 30
230V/14A 1 Ph 50/60 Hz
Cutmaster 12 12 15 20 40
400V/8A 3Ph 50/60Hz 230V/400V 15A/8A 3 Ph 50/60Hz
Cutmaster 20 20 25 32 60
400V/16A 3Ph 50/60Hz 230V/400V 24A/16A 3 Ph 50/60Hz
Cutmaster 25 25 30 38 80
400V/20A 3Ph 50/60Hz 230V/400V 39A/20A 3 Ph 50/60Hz
Cutmaster 35 35 40 45 100
400V/27A 3Ph 50/60Hz 230V/400V 45A/27A 3 Ph 50/60Hz
Cutmaster 40 40 50 55 120
400V/32A 3Ph 50/60Hz 230V/400V 56A/32A 3 Ph 50/60Hz
35% @ 30A 381 x 305 x 610 17,7 24,5 SL60 Hand 6,1 Manual Air
aluminium, Stainless Steel, Mild Steel HVAC, Home Shop Plumbing, Auto Body Repair
60% @ 40A 416 x 273 x 572 19,5 26,3 SL60 Hand 6,1 / 15,2 Manual Air
aluminium, Stainless Steel, Mild Steel Construction, Maintenance / Repair, Fabrication
40% @ 60A 383 x 305 x 610 19,5 26,3 SL60 Hand 6,1 / 15,2 Manual Air
aluminium, Stainless Steel, Mild Steel Construction, Maintenance / Repair, Fabrication
40% @ 80A 381 x 305 x 610 19,5 26,3 SL60 Hand 6,1 / 15,2 Manual Air
aluminium, Stainless Steel, Mild Steel Heavy Fabrication, Manufacturing
80% @ 100A 381 x 305 x 762 28,1 34,9 SL100 Hand 6,1 / 15,2 Manual Air
aluminium, Stainless Steel, Mild Steel Heavy Fabrication, Manufacturing
80% @ 120A 381 x 305 x 762 28,1 34,9 SL100 Hand 6,1 / 15,2 Manual Air
aluminium, Stainless Steel, Mild Steel Heavy Fabrication, Manufacturing
APC-IN 35 CUT 1x230V~ / 50-60Hz 25A DELAYED 0,85 100% 19A 4,4KVA 27A 91V 60%
APC-IN 45 CUT 3x400V~ / 50-60Hz 10A DELAYED 0,85 100% 9A 6,2KVA 35A 94V 14V 5bar 12 15mm H IP 23 AF EN 609741 160 x 400 x 260mm 9,5 Kg + 1,2 Kg torch 45A 60% 11,5 A 7,9KVA 45A 98V
APC 30-75 CUT 3x400V~ / 50-60Hz 25A DELAYED 0,8 100% 23,0A 30A 92,0V 275V 0,55MPa 25 mm F IP 21 AF EN 609741 400 x 750 x 650 mm 67 Kg 100,0V
RECOMMENDED ACCESSORIES
FILTER
GUIDE KITS
PLASMA
19
ALFA IN a.s., Nov Ves 74, 675 21 Okky Czech Republic, www.alfain.eu, info@alfain.eu tel.: +420 568 840 009, fax.: +420 568 840 966
ENG-CAT-08
ALFA IN a.s., text and images correspond to the situation on the day of print. Right of change reserved.