AltechCorp - Power Supplies

ALTECH DIN-Rail Power Supplies
ENERGY SAVER
Choose your product from a wide range of features and options, suitable for almost all applications.
Slimline Small in size - narrow footprint Powerful with generous power reserves Simple usage 10W to 100W Single Phase Low Profile Installs in seconds Simple usage Robust plastic case 15W to 100W Industrial Metal Case Single Phase Single Phase Power Supply (75 to 480W) Rugged metal case Industrial Metal Case Three Phase Three Phase Power Supply (240 to 960 W) Rugged metal case High Efficiency Compact Housing Universal input voltage Rugged metal case 150% peak load capacity Wide input voltage Rugged metal case 120W to 480W Accessories Redundancy Buffer Module UPS Module 82-91 72-81 60-71 44-59 34-43 20-33 6-19
Frequently Asked Questions Selection Guide Index Terms and Conditions
92-94 95 94-97 98
Altech Corp. 35 Royal Road Flemington, NJ 08822 Phone (908)806-9400
DIN Rail Power Supplies

ENERGY SAVER
Din Rail mount, Wide Power Range (10W-960W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and compact Design 3 year warranty
Short circuit Protection Overvoltage Protection Overload Protection Overtemperature Protection Cooling by free air convection Worldwide approvals UL508 Listed and/or UL60950-1 recognized
Rugged Metal Case
Multiple output connector for easy wiring Adjustable DC output voltage DC (on) LED indicator
Easy to understand layout panel
UL508 Listed CE compliance Universal Input Narrow for maximized panel space
For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power.
Altech Power Supplies ... ...Easy to Use & Reliable!
SPECIFICATIONS
Input
Input Voltage 90-264V AC for single phase 100-550V AC for wide input 340-550V AC for three phase Input Frequency: 47-63 Hz Input Current: 0.6 A to 8A Inrush Current: cold start up to 60 A max Power Factor: All units are EN61000-3-2 compliant
Output
Output Voltage: 5V; 12V; 15V; 24V; 48V Output Voltage Adjustment Range: 10% Initial Set Accuracy: 2% max Ripple & Noise: See data sheet Over-voltage Protection: 115-135% Overload Protection: 105-150%, constant current with auto recovery
EMC & Safety

Emissions: EN55022/55011, Class B EN61000-3-2, -3 Voltage Flicker: EN61000-3-3 ESD Immunity: EN61000-4-2, level 3 Radiated Immunity: EN61000-4-3, 10 V/m EFT/Burst: EN61000-4-4, level 3 Surge: EN61000-4-5, level 3 Conducted Immunity: EN61000-4-6, 10 V rms, Safety Approvals: EN60950 UL508 UL60950 CE marked Military Standard MIL-HDBK-217F
General
Efficiency: 72-94% (see data sheets) Isolation: 3000V AC Input to Output 1500V AC Input to Ground 500V AC Output to Ground
Environmental
Power supplies can run at 100% capacity inside the panel, there is no need for oversizing. See derating curves for more information. Operating Temperature: -20 to +60C (-4 to +140F) Operating Humidity: 90% RH, non-condensing Storage Temperature: -20 C to +85 C (-4 to +185F) Vibration: 2G, 10 Hz to 500 kHz, 10 min/cycle for 60 minutes each axis
Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490
Slim line Single Phase Power Supply

ALTECHs slim type DIN rail switching power supply, PS-S Series designed for the fast growing demand of low wattage DIN rail applications. These 10W to 100W models are enclosed with fully isolated plastic case to prevent users from hazardous shock. The design complies with the slim trend that the precious space on the industrial rail can be saved effectively. Featuring up to 84% of efficiency, this series is cooled by only free air convection up to 70C that significantly increase the reliability and lifetime of the power supply. Another important feature of PS-S Series is its low power consumption (<0.75W). This unique characteristic can significantly expand the application of PS-S series beyond just heavy industrial field, but can also be implied to datacom or IT applications that require green power to save the energy and to obey the anticipated government laws in the near future! Short circuit protection, overload protection, over voltage protection, and the DC OK signal for monitoring the status of power supply are standard functions for the PS-S Series. Typical applications includes factory automation, process control, electro-mechanical industry, datacom and IT.
Input voltage range: AC inrush current (max): Cold start: DC adjustment range: Overload protection: Over-voltage protection: Setup, rise, time (max): Withstand voltage: Working temperature: Safety standards: EMC standards:
Military Standard
85-264V AC; 120-370V DC 20A at 115V AC,; 40A at 230V DC 10% rated output voltage 105%-160% constant current limiting (auto- recovery) 115%-135% rated output voltage 500ms, 30ms/230V AC 1000ms, 30ms/115V AC, at full load I/P-O/P: 3KV AC, I/P-FG:1.5KV AC, O/P-FG:0.5KV AC -20 to +70C (-4 to +158F), refer to output derating curve UL508, EN60950-1 EN55022 class B EN61000-4-2,3,4,5,6,8,11 ENV50204; EN55024; EN61000-6-1; EN61204-3; Light Industry Level criteria A MIL-HDBK-217F
PS-S Series
ENERGY SAVER
Features: Universal AC input/Full range Protections: Short circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable NEC class 2 / LPS compliant (12V,24V,48V only) LED indicator for power on DC OK relay contact No load power consumption<0.75W 100% full load burn-in test 3 year warranty
Multiple output connector for easy wiring on PS-S40, PS-S60 and PS-S100 models
DC on LED signal
35mm DIN Rail Mounting
Adjustable DC output voltage
Easy to understand layout panel CE Compliance UL508 Listed Robust plastic housing Universal Input Slim Series - narrow for maximized panel space
10-100W Slimline
POWER SUPPLIES
ENERGY SAVER
10W Single Output Industrial DIN Rail Power Supply

Cat. No. PS-S1005 PS-S1012 PS-S1015 PS-S1024 Output V DC A 5V DC 12V DC 15V DC 24V DC 2A 0.84A 0.67A 0.42A Tol. % 5% 3% 3% 2% Ripple & Noise 80 mVp-p 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 77% 81% 81% 84% NOTES

Cat. No. PS-S2005 PS-S2012 PS-S2015 PS-S2024 Output V DC A 5V DC 12V DC 15V DC 24V DC 3A 1.67A 1.34A 1A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 76% 80% 81% 84% NOTES

Cat. No. PS-S4005 PS-S4012 PS-S4024 PS-S4048 Output V DC A 5V DC 12V DC 24V DC 48V DC 6A 3.33A 1.7A 0.83A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 150 mVp-p 200 mVp-p Efficiency 78% 86% 88% 88% NOTES

Cat. No. PS-S6005 PS-S6012 PS-S6024 PS-S6048 Output V DC A 5V DC 12V DC 24V DC 48V DC 10A 5A 2.5A 1.25A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 150 mVp-p 200 mVp-p Efficiency 78% 86% 88% 87% NOTES

Cat. No. PS-S10012 PS-S10024 PS-S10048 Output V DC A 12V DC 24V DC 48V DC 7.5A 4A 2A Tol. % 1% 1% 1% Ripple & Noise 120 mVp-p 150 mVp-p 200 mVp-p Efficiency 85% 86% 88% NOTES
For more information please visit www.altechcorp.com
SPECIFICATIONS PS-S10 Series

Terminal Pin. No Assign. (TB1)
90

Pin No. Assignment DC OUTPUT +V 4 DC OUTPUT -V 5 DC OK SIGNAL 6
Pin No. 1 2 3
PS-S10xx
Assignment FG AC/N AC/L
10
0 22 .5
Universal Input: 85-264V AC, 120-370V DC full range; 0.33A @ 110V AC; 0.21A @ 230V AC Connection: Input - 2 poles, Output 2 poles, single screw terminal Size (WxHxD): 22.5x90x100mm (0.89x3.54x3.94 inches) Packaging: 1/box; 0.37lbs / 0.17Kg
PS-S20 Series

90

Pin No. 1 2 3
PS-S20xx
10
0 22 .5
Universal Input: 85-264V AC, 120-370V DC full range; 0.55A @ 110V AC; 0.35A @ 230V AC Connection: Input - 2 poles, Output 2 poles, single screw terminal Size (WxHxD): 22.5x90x100mm (0.89x3.54x3.94 inches) Packaging: 1/box; 0.42lbs / 0.19Kg
PS-S40 Series
90
PS-S40xx

Pin No. 1 2 3 Assignment FG AC/N AC/L

Pin No. Assignment DC OUTPUT +V 1/2 DC OUTPUT -V 3/4 DC OK Relay Contact 5/6
10
0 40
Universal Input: 85-264V AC, 120-370V DC full range; 1.1A @ 115V AC, 0.7A @ 370V AC Connection: Input - 2 poles, Output 2 poles, double screw terminal Size (WxHxD): 40x90x100mm (1.57x3.54x3.94 inches) Packaging: 1/box; 0.66lbs / 0.3Kg
PS-S60 Series
90
PS-S60xx


10
0 40
Universal Input: 85-264V AC, 120-370V DC full range; 1.8A @ 115V AC, 1A @ 370V AC Connection: Input - 2 poles, Output 2 poles, double screw terminal Size (WxHxD): 40x90x100mm (1.57x3.54x3.94 inches) Packaging: 1/box; 0.73lbs / 0.33Kg
PS-S100 Series
90
PS-S100xx

10
55
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
PS-S10 Series
Specifications
YGRENE REVAS
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable NEC class 2 / LPS compliant Built in DC OK active signal LED indicator for power on No load power consumption < 0.75W 100% full load burn-in test 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME
PS-S1005
5V 2A 0~2A 10W 80mVp-p 5.0%
PS-S1012
12V 0.84A 0~0.84A 10W 120mVp-p 3.0%
PS-S1015
15V 0.67A 0~0.67A 10W 120mVp-p 3.0%
PS-S1024
24V 0.42A 0~0.42A 10W 150mVp-p 2.0% 1.0% 2.0%
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor Tolerance: includes set up tolerance, line regulation and load regulation.
1.0% 1.0% 1.0% 5.0% 3.0% 3.0% 500ms, 30ms/230VAC; 1000ms, 30ms/115VAC at full load 120ms/230VAC; 25ms/115VAC at full load 85~264VAC; 120~370VDC 47~63Hz 77% 81% 0.33A/115VAC; 0.21A/230VAC COLD START: 35A/115VAC; 70A/230VAC <1mA/ 240VAC Above 105% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
INPUT
HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVERVOLTAGE PROTECTION OVER TEMPERATURE PROTECTION DC OK AKTIV SIGNAL (max.)
81%
84%
PROTECTION
5.75~6.75V
13.8~16.2V
17.25~20.25V
27.6~32.4V
Protection type: Shut down overvoltage, re-power on to recover
Power supply shut down at 70C constant current limiting / output voltage goes to 0; re-power on to recover 3.75~6V (50mA) 9~13.5V (40mA) 11.5~16.5V (40mA) 18~27V (20mA) -20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C; 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1compliant NEC class2 / LPS compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-1;EN61204-3; light industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that is still meets EMC directives.
ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP. / HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS
SAFETY & EMC
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION
HARMONIC CURRENT EMS IMMUNITY
OTHERS
MTBF DIMENSION PACKING
584K hrs min. MIL-HDBK-217K (25C) 22.5x90x100mm (WxHxD) 0.17Kg; 72pcs / 13.2Kg / 0.91CUFT
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature
10
Mechanical Specification
22.5 5 5 100

+V -V DC OK
90
N L
5 5
Block Diagram
EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER +V -V
I/P
DETECTION CIRCUIT O.L.P. CONTROL O.V.P.
Application of DC OK Signal
5.1V V-
Model 5V 12V 15V 24V
R 200 1.5K 2K 3.9K V-
R 1K 2.4K 3K 4.7K V-
Relay
RL
RL 120 700 700 1.2K
Derating Curve
100
Output Derating VS Input Voltage

Ta=25
100
Others
90 80
80
60 40
5V
70 60 50
20
40
-20
10
20
30
40
50
60
70 (VERTICAL)
85
95
100 115
120 140
160 180
200 220
240
264
11
PS-S20 Series
Specifications
ENERGY SAVER
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable NEC class 2 / LPS compliant Built in DC OK active signal LED indicator for power on No load power consumption < 0.75W 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME
PS-S2005
5V 3A 0~3A 15W 80mVp-p 4.75 ~ 5.5V 2.0%
PS-S2012
12V 1.67A 0~1.67A 20W 120mVp-p 10.8 ~ 13.2V 1.0%
PS-S2015
15V 1.34A 0~1.34A 20W 120mVp-p 13.5 ~ 16.5V 1.0%
PS-S2024
24V 1A 0~1A 24W 150mVp-p 21.6 ~ 26.4V 1.0% 1.0% 1.0%
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor
Tolerance: includes set up tolerance, line regulation and load regulation.
1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 500ms, 30ms/230VAC; 1000ms, 30ms/115VAC at full load 50ms/230VAC; 20ms/115VAC at full load 85~264VAC 120~370VDC 47~63Hz 76% 80% 0.55A/115VAC; 0.35A/230VAC COLD START: 20A/115VAC; 40A/230VAC 1mA/ 240VAC 105% ~ 160% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
INPUT
HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
81%
84%
PROTECTION
OVERLOAD PROTECTION OVERVOLTAGE PROTECTION OVER TEMPERATURE PROTECTION DC OK AKTIV SIGNAL (max.)
5.75~6.75V
13.8~16.2V
17.25~20.25V
27.6~32.4V
Power supply shut down at 70C constant current limiting / output voltage goes to 0; re-power on to recover 3.75~6V (50mA) 9~13.5V (40mA) 11.5~16.5V (40mA) 18~27V (20mA) -20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1approved NEC class2 / LPS compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-1;EN61204-3; light industry level; criteria A
ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS
SAFETY & EMC
OTHERS
236.9K hrs min. MIL-HDBK-217K (25C) 22.5x90x100mm (WxHxD) 0.19Kg; 72pcs / 14.7Kg / 0.91CUFT
12
22.5 5 5 100
+V -V DC OK

+
90
+V ADJ

Pin No. Assignment 4 DC OUTPUT +V DC OUTPUT -V 5 DC OK SIGNAL 6
N L
5 5
Block Diagram
EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER +V -V
I/P
DETECTION CIRCUIT O.L.P. CONTROL O.V.P.
Application of DC OK Signal
5.1V V-
R 200 1.5K 2K 3.9K V-
R 1K 2.4K 3K 4.7K V-
Relay
RL
RL 120 700 700 1.2K
Derating Curve
100

Ta=25
100 90
80
80 70 60 50
60 40
20
40
-20
10
20
30
40
50
60
70 (VERTICAL)
85
95
100 115
120 140
160 180
200 220
240
264
13
PS-S40 Series
Specifications
ENERGY SAVER
Features:
Universal AC input/full range Protections: Short Circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable NEC class 2 / LPS compliant (12V,24V,48V only) LED indicator for power on DC OK relay contact No load power consumption < 0.75W 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.)
PS-S4005
5V 6A 0~6A 30W 80mVp-p 5 ~ 6V 2.0%
PS-S4012
12V 3.33A 0~3.33A 40W 120mVp-p 12 ~ 15V 1.0%
PS-S4024
24V 1.7A 0~1.7A 40.8W 150mVp-p 24 ~ 30V 1.0%
PS-S4048
48V 0.83A 0~0.83A 39.8W 200mVp-p 48 ~ 56V 1.0% 1.0% 1.0%
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor
1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 500ms, 30ms/230VAC; 500ms, 30ms/115VAC at full load 50ms/230VAC; 20ms/115VAC at full load 85~264VAC 120~370VDC 47~63Hz 78% 86% 1.1A/115VAC; 0.7A/230VAC COLD START: 30A/115VAC; 60A/230VAC 1mA/ 240VAC 105% ~ 150% rated output power
INPUT
PROTECTION
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVERVOLTAGE PROTECTION OVER TEMPERATURE PROTECTION DC OK AKTIV SIGNAL (max.)
88%
88%
6.25~7.25V
15.6~18V
31.2~36V
57.6~64.8V
Power supply shut down at 70C constant current limiting / output voltage goes to 0; re-power on to recover Relay contact rating (max.): 30V/ 1A resistive -20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 UL60950-1 EN60950-1approved NEC class2 / LPS compliant (12V, 24V, 48V only) I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204 ; EN61000-6-2; EN61204-3; light industry level; criteria A
ENVIRONMENT
SAFETY & EMC
OTHERS
301.7K hrs min. MIL-HDBK-217K (25C) 40x90x100mm (WxHxD) 0.3Kg; 42pcs / 13.6 Kg / 0.82CUFT
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature.
14
40 5 5 5 5 5 100

+V +V-V -V
+
90 +V ADJ

Pin No. Assignment 1,2 DC OUTPUT +V DC OUTPUT -V 3,4 DC OK RELAY CONTACT 5,6
7.5 7.5
Block Diagram
I/P
EMI FILTER
RECTIFIERS & FILTER
POWER SWITCHING
RECTIFIERS & FILTER O.C.P. DETECTION CIRCUIT
+V -V
O.L.P.
CONTROL O.V.P.
DC OK Relay Contact
age.
Derating Curve
100

Ta=25
100 90
80
80 70 60 50
60 40
20
40
-20
10
20
30
45
55
60
70 (VERTICAL)
85
95
100 115
120 140
160 180
200 220
240
264
15
PS-S60 Series
Specifications
ENERGY SAVER
Features:
Universal AC input/full range Protections: Short Circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable NEC class 2 / LPS compliant (24V,48V only) LED indicator for power on No load power consumption < 0.75W 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME
PS-S6005
5V 10A 0 ~ 10A 50W 80mVp-p 5 ~ 6V 2.0%
PS-S6012
12V 5A 0 ~ 5A 60W 120mVp-p 12 ~ 15V 1.0%
PS-S6024
24V 2.5A 0 ~ 2.5A 60W 150mVp-p 24 ~ 30V 1.0%
PS-S6048
48V 1.25A 0 ~ 1.25A 60WRIPPLE & 200mVp-p 48 ~ 56V 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.5% 1.0% 1.0% 500ms, 30ms/230VAC; 500ms, 30ms/115VAC at full load 50ms/230VAC / 20ms/115VAC at full load 85 ~ 264VAC 120 ~ 370VDC 47~63Hz 78% 86% 1.8A/115VAC; 1A/230VAC COLD START: 60A/230VAC 1mA/ 240VAC 105% ~ 150% rated output power
INPUT
HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVERVOLTAGE PROTECTION OVER TEMPERATURE PROTECTION DC OK AKTIV SIGNAL (max.)
88%
87%
PROTECTION
6.25 ~ 7.25V
15.6 ~ 18V
31.2 ~ 36V
57.6 ~ 64.8V
Power supply shut down at 70C constant current limiting / output voltage goes to 0; re-power on to recover Relay contact rating (max.): 30V/1A resistive -20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 UL60950-1 EN60950-1approved NEC class2 / LPS compliant (24V, 48V only) I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-2; EN61204-3; light industry level; criteria A
ENVIRONMENT
SAFETY & EMC
OTHERS
299.2K hrs min. MIL-HDBK-217K (25C) 40x90x100mm (WxHxD) 0.33Kg; 42pcs / 14.8Kg / 0.82CUFT
16
40 5 5 5 5 5 100

+V +V-V -V
+
90 +V ADJ

7.5 7.5
Block Diagram
I/P
EMI FILTER
RECTIFIERS & FILTER
POWER SWITCHING
RECTIFIERS & FILTER O.C.P. DETECTION CIRCUIT
+V -V
O.L.P.
CONTROL O.V.P.
DC OK Relay Contact
age.
Derating Curve
100

Ta=25
100
12V,24V,48V
90
80
80 70
60 50 40
5V
60 50
20
40
-20
10
20
30
45
55
60
70 (VERTICAL)
85
95
100 115
120 140
160 180
200 220
240
264
17
PS-S100 Series
Specifications
YGRENE REVAS
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Overvoltage / Over temperature ZCS/ZVS technology to reduce power dissipation Cooling by free air convection DIN rail mountable DC OK relay contact No load power consumption < 1W LED indicator for power on 100% full load burn-in test 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME
PS-S10012
12V 7.5A 0 ~ 7.5A 90W 120mVp-p 12 ~ 15V 1.0%
PS-S10024
24V 4A 0 ~ 4A 96W 150mVp-p 24 ~ 30V 1.0%
PS-S10048
48V 2A 0 ~ 2A 96W 200mVp-p 48 ~ 56V 1.0% 1.0% 1.0%
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor.
1.0% 1.0% 1.0% 1.0% 3000ms, 50ms/230VAC; 3000ms, 50ms/115VAC at full load 50ms/230VAC; 20ms/115VAC at full load 85 ~ 264VAC 120 ~ 370VDC
INPUT
HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (max) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE SHORT CUIRCUIT PROTECTION
Deating maybe needed under low input voltages, please check the derating curve for more detail
PROTECTION
47~63Hz PF 0.95/230VAC; PF 0.98/115VAC at full load 85% 86% 1.3A/115VAC; 0.8A/230VAC COLD START: 30A/115VAC; 60A/230VAC 1mA/ 240VAC 105% ~ 150% rated output power
88%
15.6 ~ 18V
31.2 ~ 36V
57.6 ~ 64.8V
90C 10C (RTH2) detect on heat sink of power transistor

ENVIRONMENT
DC OK AKTIV SIGNAL (max.) WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION
Power supply shut down at 70C constant current limiting / output voltage goes to 0; re-power on to recover Relay contact rating (max.): 30V/1A resistive -10 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1compliant I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25C/70% RH Compliance to EN55011 EN55022 (CISPR22) EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-2; EN61204-3; light industry level; criteria A
SAFETY & EMC
OTHERS
346K hrs min. MIL-HDBK-217K (25C) 55x90x100mm (WxHxD) 0.42Kg; 30pcs / 13.6Kg / 0.82CUFT
18


Block Diagram
DC OK Relay Contact
Derating Curve
19
Low Profile Single Phase Power Supply (Class II)

The Low Profile Single Phase Power Supplies are 15W to 100W single output Class II DIN rail switching power supplies. They are designed for the fast growing demand of the DIN rail application with limited enclosure height. With Class II of protection level, low profile series provide users a safer operating environment since the whole plastic case is free from hazardous leakage current. Featuring up to 89% of high efficiency, this series can be cooled by only free air convection that significantly increase the reliability and lifetime of the power supply. Complying with the safety of the UL508 and EMC requirements of EN50178 which is mainly for power distribution aspects, the low profile switching power supplies are suitable to be installed in a power distribution box or a control cabinet and the major application fields are building automation and household appliance control.
Input voltage range: AC inrush current: DC adjustment range: Overload protection: Over-voltage protection: Setup, rise, hold up time: Withstand voltage: Working temperature: Safety standards: EMC standards:
Military Standard:
85-264V AC; 120-370V DC Cold start: 15A at 115V AC, 30A at 230V DC (PS-30xx) 10% rated output voltage 105%-160% constant current limiting, auto-recovery 115%-135% rated output voltage 100ms, 30ms, 100ms at full loadand 230V AC (PS-30xx) I/P-O/P:3KV AC, I/P-FG:1.5KV AC -20 to +50C (-4 to +122F) at 100% and +60C (+140F) at 80% load UL60950-1, UL508 EN55022 class B EN61000-4-2,3,4,5,6,8,11 ENV50204 EN61204-3 MIL-HDBK
20
PS Series - Low Profile
ENERGY SAVER
Features: Universal AC input/Full range Protections: Short circuit / Overload / Overvoltage Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on 100% full load burn-in test 3 year warranty
Output connector for easy wiring
DC on LED signal Adjustable DC output voltage 35mm DIN Rail Mounting Easy to understand layout panel UL508 Listed Robust plastic housing Universal Input
Compact Series - narrow for maximized panel space

21
15-100W Low Profile
POWER SUPPLIES
15W Single Output Class II DIN Rail Power Supply

Cat. No. PS-1505 PS-1512 PS-1515 PS-1524 Output V DC A 5V DC 2.4A 12V DC 1.25A 15V DC 1A 24V DC 0.63A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 77% 84% 83.5% 85%
ENERGY SAVER
NOTES

Cat. No. PS-3005 PS-3012 PS-3015 PS-3024 Output V DC A 5V DC 3A 12V DC 2A 15V DC 2A 24V DC 1.5A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 74% 81% 82% 83% NOTES

Cat. No. PS-4505 PS-4512 PS-4515 PS-4524 Output V DC A 5V DC 5A 12V DC 3.5A 15V DC 2.8A 24V DC 2A Tol. % 2% 1% 1% 1% Ripple & Noise 100 mVp-p 200 mVp-p 240 mVp-p 480 mVp-p Efficiency 72% 77% 77% 80% NOTES

Cat. No. PS-6005 PS-6012 PS-6015 PS-6024 Output V DC A 5V DC 6.5A 12V DC 4.5A 15V DC 4.0A 24V DC 2.5A Tol. % 2% 1% 1% 1% Ripple & Noise 80 mVp-p 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 76% 82% 83% 84% NOTES

Cat. No. PS-10012 PS-10015 PS-10024 Output V DC A 12V DC 15V DC 24V DC 7.5A 6.5A 4.2A Tol. % 2% 1% 1% Ripple & Noise 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 87% 87% 89%
ENERGY SAVER
NOTES
22
SPECIFICATIONS PS-15 Series

93
Terminal Pin. No Assignment

Pin No. Assignment Pin No. Assignment AC/L -V 1 3 AC/N +V 2 4
56 25
Universal Input: 85-264V AC, 120-370V DC full range; 0.88A @ 115V AC; 0.48A @ 230V AC Connection: Input - 2 poles, Output 2 poles, single screw terminal Size (WxHxD): 25x93x56mm (0.98x3.66x2.20 inches) Packaging: 1/box; 0.22lbs / 0.1Kg
Pin No. 1 2 3,4 Assignment Pin No. Assignment AC/L 5,6 -V AC/N LED 7 +V ADJ. +V 8
PS-30 Series
93
56
78
Universal Input: 85-264V AC, 120-370V DC full range; 0.88A @ 115V AC; 0.48A @ 230V AC Connection: Input - 2 poles, Output 2 poles, double screw terminal Size (WxHxD): 78x93x56mm (3.07x3.66x2.20 inches) Packaging: 1/box; 0.60lbs / 0.27Kg
PS-45 Series
93
Pin Assignment Pin AC/L 1 6,7 AC/N 2 8 9 3 FG 4,5 DC OUTPUT-V
Assignment DC OUTPUT+V LED +V ADJ.
67
78
PS-60 Series
93

56
78
PS-100 Series
93

56
10
Universal Input: 88-264V AC, 124-370V DC full range; 3A @ 115V AC, 1.6A @ 230V AC Connection: Input - 2 poles, Output 2 poles, double screw terminal Size (WxHxD): 100x93x56mm (3.94x3.66x2.20 inches) Packaging: 1/box; 0.77lbs / 0.35Kg
23 12
PS-15 Series
Specifications
ENERGY SAVER
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Over Voltage Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on No load power consumption<0.5W 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) OVERLOAD
PS-1505
5V 2.4A 0 ~ 2.4A 12W 80mVp-p 4.75 ~ 5.5V 2.0%
PS-1512
12V 1.25A 0 ~ 1.25A 15W 120mVp-p 10.8 ~ 13.2V 1.0%
PS-1515
15V 1A 0 ~ 1A 15W 120mVp-p 13.5 ~ 16.5V 1.0%
PS-1524
24V 0.63A 0 ~ 0.63A 15.2W 150mVp-p 21.6 ~ 26.4V 1.0% 1.0% 1.0%
INPUT
1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1000ms, 50ms / 230VAC 1000ms, 50ms / 115VAC at full load 70ms / 230VAC 16ms / 115VAC at full load 85 ~ 264VAC 120 ~ 370VDC 47 ~ 63Hz 77% 84% 0.88A / 115VAC 0.48A / 230VAC COLD START 35A / 115VAC 65A / 230VAC 105 ~ 160% rated output power
83.50%
85%
PROTECTION
Protection type: Constant current limiting recovers automatically after fault condition is removed (Hiccup mode) Constant current operation region is within 60 ~ 100% rated output voltage.
OVERVOLTAGE
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Protection type: Shut down overvoltage, clamping by zener diode
ENVIRONMENT
SAFETY & EMC
-20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL60950-1 EN60950-1approved Design refer to EN50178 I/P-O/P: 3KVAC I/P-O/P: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55011 EN55022 (CISPR22); EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-2; EN61204-3; heavy industry level; criteria A
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
OTHERS
1172.3K hrs min. MIL-HDBK-217K (25C) 25x93x56mm (WxHxD) 0.1Kg; 140pcs / 15Kg / 0.92CUFT
24
56 25 5 26.7 47
+V

Pin No. Assignment Pin No. Assignment AC/L -V 1 3 AC/N +V 2 4
LE D Vadj. 44.2 4 67.2 93 N L 5
-V
Block Diagram
I/P
EMI FILTE R
RE CTIFIERS & FILTE R
POWE R SWITCHING
RE CTIFIE RS & FILTE R
+V -V
DE TE CTION CIRCUIT O.L.P. CONTROL O.V.P.
Derating Curve
100

Ta=25
100 90
80
LOAD (%)
LOAD (%)
0 10 20 30 40 50 60 70 (VERTICAL)
80 70 60 50
60 40
20
40
-20
85
95
100
115
120
140
160
180
200
220
240
264
AMBIENT TEMPERATURE (C)
INPUT VOLTAGE (VAC) 60Hz

25
PS-30 Series
Specifications
Features:
Universal AC input/ full range Protections: Short Circuit / Overload / Over Voltage Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
PS-3005
5V 3A 0 ~ 3A 15W 80mVp-p 4.75 ~ 5.5V 2.0% 1.0% 1.0% 100ms, 30ms / 230VAC 100ms / 230VAC
PS-3012
12V 2A 0 ~ 2A 24W 120mVp-p 10.8 ~ 13.2V 1.0%
PS-3015
15V 2A 0 ~ 2A 30W 120mVp-p 13.5 ~ 16.5V 1.0%
PS-3024
24V 1.5A 0 ~ 1.5A 36W 150mVp-p 21.6 ~ 26.4V 1.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0% 100ms, 30ms / 115VAC at full load 21ms / 115VAC at full load
INPUT
PROTECTION
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD OVERVOLTAGE
85 ~ 264VAC 120 ~ 370VDC 47 ~ 63Hz 74% 81% 0.88A / 115VAC 0.48A / 230VAC COLD START 15A / 115VAC; 30A / 230VAC 105 ~ 160% rated output power
82%
83%
Protection type: Constant current limiting recovers automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
ENVIRONMENT
SAFETY & EMC
-20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL60950-1 EN60950-1approved Design refer to EN50178 I/P-O/P: 3KVAC I/P-O/P: 100M Ohms / 500VDC Compliance to EN55011 EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024; ENV50204; EN61000-6-2; EN61204-3; heavy industry level; criteria A
OTHERS
441.5K hrs min. MIL-HDBK-217K (25C) 78x93x56mm (WxHxD) 0.27Kg; 48pcs / 14Kg / 1.02CUFT
26
56 78 5 37.75 5 5 5 12.2 27.4 47

3 4 5 6 7 93 45 3 68 8
Block Diagram
I/P
E MI FILTE R
1 2
POWE R SWITCHING
R E CTIFIE R S & FILTE R
+V -V
DE TE CTION CIRCUIT O.L.P. CONTR OL O.V.P.
Derating Curve
100

Ta=25
100 90
80
80
LOAD (%)
LOAD (%)
0 10 20 30 40 50 60 70 (VERTICAL)
60 40
70 60 50
20
40
-20
85
95
100
115
120
140
160
180
200
220
240
264
27
PS-45 Series
Specifications
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Over Voltage/ Overtemperature Cooling by free air convection DIN rail mountable UL508 approved LED indicator for power on Fix switching frequency at 100kHz 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PS-4505
5V 5A 0 ~ 5A 25W 100mVp-p 4.75 ~ 5.5V 2.0%
PS-4512
12V 3.5A 0 ~ 3.5A 42W 200mVp-p 10.8 ~ 13.2V 1.0%
PS-4515
15V 2.8A 0 ~ 2.8A 42W 240mVp-p 13.5 ~ 16.5V 1.0% 1.0% 1.0%
PS-4524
24V 2A 0 ~ 2A 48W 480mVp-p 21.6 ~ 26.4V 1.0% 1.0% 1.0%
INPUT
1.0% 1.0% 1.0% 1.0% 800ms, 60ms / 230VAC at full load 60ms / 230VAC at full load 85 ~ 264VAC 120 ~ 370VDC 47 ~ 63Hz 72% 77% 1.5A / 115VAC 0.75A / 230VAC COLD START 28A / 115VAC; 56A / 230VAC 1mA / 240VAC 105 ~ 160% rated output power
77%
80%
PROTECTION
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Tj 135C typically (U1) detect on heat sink of power transistor

ENVIRONMENT
SAFETY & EMC
WORKING TEMPERATURE WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
-10 ~ +50C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55011; EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; heavy industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
OTHERS
364.6K hrs min. MIL-HDBK-217K (25C) 93x78x67mm (LxWxH) 0.31Kg; 48pcs / 16.1Kg / 1.3CUFT
28
78 7.5 8.5 29 67
3 4

Pin Assignment Pin 1 AC/L 6,7 2 AC/N 8 3 FG 9 4,5 DC OUTPUT-V Assignment DC OUTPUT+V LED +V ADJ.
93
Block Diagram
I/P E MI FILTE R RE CTIFIE RS & FILTE R POWE R SWITCHING PWM CONTR OL FG RE CTIFIE RS & FILTE R DE TE CTION CIRCUIT +V -V
Derating Curve
100
77
Static Characteristic (24V)

Ta=25
28
80
300 250 200 150 100 50 70 80 100 120 140 160 180 200 220 240 260
24
60 40
20 16 12
20
8
-10 0 10 20 30 40 50 60 (VERTICAL)

OUTPUT RIPPLE (mVp-p)
32
350
LOAD (%)
LOAD (%)
29
PS-60 Series
Specifications
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Over Voltage Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) OVERLOAD OVERVOLTAGE
PS-6005
5V 6.5A 0 ~ 6.5A 32.5W 80mVp-p 4.75 ~ 5.5V 2.0% 1.0% 1.0% 100ms, 30ms / 230VAC 100ms / 230VAC
PS-6012
12V 4.5A 0 ~ 4.5A 54W 120mVp-p 11.1 ~ 13.2V 1.0%
PS-6015
15V 4A 0 ~ 4A 60W 120mVp-p 13.5 ~ 16.5V 1.0%
PS-6024
24V 2.5A 0 ~ 2.5A 60W 150mVp-p 21.6 ~ 26.4V 1.0% 1.0% 1.0%
INPUT
1.0% 1.0% 1.0% 1.0% 200ms, 30ms / 115VAC at full load 23ms / 115VAC at full load
PROTECTION
85 ~ 264VAC 124 ~ 370VDC 47 ~ 63Hz 76% 82% 1.2A / 115VAC 0.8A / 230VAC COLD START 18A / 115VAC; 36A / 230VAC 105 ~ 160% rated output power
83%
84%
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
ENVIRONMENT
-20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL60950-1 EN60950-1approved Design refer to EN50178 I/P-O/P: 3KVAC I/P-O/P: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55011 EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; EN61204-3; heavy industry level; criteria A
SAFETY & EMC
OTHERS
216.2K hrs min. MIL-HDBK-217K (25C) 78x93x56mm (WxHxD) 0.3Kg; 48pcs / 15.4Kg / 1.02CUFT
30
56 78 5 37.75 5 5 5 12.2 27.4 47
1 2

3 4 5 6 7 93 45 3 68 8
Block Diagram
I/P
E MI FILTE R
POWE R SWITCHING
R E CTIFIE R S & FILTE R
+V -V
O.L.P.
PWM CONTR OL
DE TE CTION CIRCUIT O.V.P.
Derating Curve
100

Ta=25
100 90
80
LOAD (%)
LOAD (%)
0 10 20 30 40 50 60 70 (VERTICAL)
80 70 60 50
60 40
20
40
-20
85
95
100
115
120
140
160
180
200
220
240
264
31
PS-100 Series
Specifications
YGRENE REVAS
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on No load power consumption<1W 100% full load burn-in test 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) OVERLOAD
PS-10012
12V 7.5A 0 ~ 7.5A 90W 120mVp-p 12 ~ 15V 2.0% 1.0% 1.0% 2700ms, 80ms / 230VAC 50ms / 230VAC
PS-10015
15V 6.5A 0 ~ 6.5A 97.5W 120mVp-p 15 ~ 18V 1.0% 1.0% 1.0% 2700ms, 80ms / 115VAC at full load 18ms / 115VAC at full load
PS-10024
24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p 24 ~ 29V 1.0% 1.0% 1.0%
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
INPUT
PROTECTION
88 ~ 264VAC 124 ~ 370VDC 47 ~ 63Hz 87% 87% 3A / 115VAC 1.6A / 230VAC COLD START 30A / 115VAC; 45A / 230VAC 105 ~ 135% rated output power
89%
Protection type: Constant current limiting recovers automatically after fault condition is removed Under short circuit or overload 150% conditions, output voltage may shut down for 5 sec. and then go into constant current protection mode
OVERVOLTAGE OVERTEMPERATURE
16 ~ 20V
19 ~ 23V
30 ~ 35V
ENVIRONMENT
90C 15C (RTH2) detect on heat sink of power transistor Protection type: Shut down overvoltage, re-power on to recover -20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6
SAFETY & EMC
UL60950-1 EN60950-1compliant Design refer to EN50178 WITHSTAND VOLTAGE I/P-O/P: 3KVAC ISOLATION RESISTANCE I/P-O/P: 100M Ohms/500VDC (25C; 70% RH) EMI CONDUCTION & RADIATION Compliance to EN61204-3; EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3
Harmonic current test @ 90% load
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; EN61204-3; heavy industry level; criteria A
OTHERS
MTBF DIMENSION PACKING NOTE
486K hrs min. MIL-HDBK-217K (25C) 100x93x56mm (WxHxD) 0.35Kg; 36pcs / 13.6Kg / 0.89CUFT
32
56 100 5 64.75 5 5 5 7.5 27.4 47
1 2

3 4 5 6 7
93 45 3 68 8
Block Diagram
I/P
EMI FILTER
RECTIFIERS & FILTER
POWER SWITCHING
RECTIFIERS & FILTER
+V -V
O.L.P.
PWM CONTROL
DETECTION CIRCUIT O.V.P.
Derating Curve
100

Ta=25
100 90
80
LOAD (%)
LOAD (%)
0 10 20 30 40 45 50 60 70 (VERTICAL)
80 70 60 50
60 40
20
40
-20
88
95
100 110
120 140
160 180
200 220
240
264
33
Industrial Metal Case Single Phase and Three Phase Power Supply
The Altech Industrial metal case power supplies have been optimized for use in practically any DC power applications, with a wide range of AC/DC inputs and an extended temperature range of -20 C up to +70 C. These metal case power supplies feature a small housing design and high power reserve. Excellent electrical specifications and high immunity against fluctuations in input voltage make these metal case modules the best choice to industrial automation. Altechs metal case power supplies are available in six single-phase and four three-phase models with 12VDC (75W and 120W), 24 VDC and 48VDC output voltages, and up to 40A output currents. This voltage range enables the Industrial metal case supplies to be used in virtually any single-phase or three-phase application. The Industrial metal case power supply series offers users easy wiring with screw terminal blocks and snap-on DIN-rail mounting. Designed for use in numerous applications around the world, this power supplies are UL and CSA approved, CE marked and ROHS compliant. They feature a rugged metal housing, vibration- and shock-proof construction and provide a cost-effective power delivery solution for basic functionality requirements. Single Phase Power Supply:
Input voltage range: AC inrush current: Cold start: Overload voltage protection: Over-voltage protection: Setup, rise, hold up time: Working temperature: 85-264V AC / 120-370V DC 20A at 115V AC, 40A at 230V AC 105%-160% constant current limiting auto-recovery 115%-135% rated output voltage 500ms; 70ms; 30ms at full load and 230V AC -20 to +50C (-4 to +122F) at 100% +60C (+140F) at 80% load
Three Phase Power Supply:

Three phase input Input voltage range: AC inrush current: Overload voltage protection: Over-voltage protection: Setup, rise, hold up time: Working temperature: EMC standards: 340-550V AC / 480-760V DC Cold start: 50A 105%-150% constant current limiting auto-recovery 115%-135% rated output voltage 1200ms, 40ms, 20ms @ 400V AC 800ms, 40ms, 40ms @ 500V AC full load -20 to +70C (-4 to +158F) at 100% EN61000-6-2 (EN50082-2) Heavy Industrial Level; criteria A
Single Phase 75-240W.............................................................................pages 36-45 480W and 480W Switch Select..........................................pages 46-51 Three Phase 240-960W...........................................................................pages 52-59
34
PS Series - Metal Case

Features: Universal AC input / Full range Single phase or Three phase Built in active PFC function Protections: Short circuit / Overload / Overvoltage / Over temperature Cooling by free air convection DIN rail mountable UL 508 (industrial control equipment) approved LED indicator for power on 100% full load burn-in test 3 year warranty
DC on LED signal Universal Input
35mm DIN Rail mounting
UL508 Compliance CE Compliance Rugged metal housing
Multiple output connector for easy wiring Narrow for maximized panel space
35
75-240W Single Phase
POWER SUPPLIES
75W Single Output DIN Rail Power Supply

Cat. No. PS-7512 PS-7524 PS-7548 Output V DC A 12V DC 24V DC 48V DC 6.3A 3.2A 1.6A Tol. % 2% 1% 1% Ripple & Noise 100 mVp-p 150 mVp-p 240 mVp-p Efficiency 76% 80% 81% NOTES

Cat. No. PS-12012 PS-12024 PS-12048 110/220V Output V DC A 12V DC 24V DC 48V DC 10A 5A 2.5A Tol. % 2% 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p 100 mVp-p Efficiency 80% 84% 85% NOTES
SWITCH SELECT
120W High Input Single Output DIN Rail Power Supply

Cat. No. PSH-12024 PSH-12048 Output V DC A 24V DC 48V DC 5A 2.5A Tol. % 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p Efficiency 85% 86% NOTES
HIGH INPUT
240W Single Output DIN Rail Power Supply with PFC Function
Cat. No. PSP-24024 PSP-24048 Output V DC A 24V DC 48V DC 10A 5A Tol. % 1% 1% Ripple & Noise 80 mVp-p 150 mVp-p Efficiency 84% 85% NOTES
36
SPECIFICATIONS
PS-75 Series
12 5.2


Pin No. Assignment DC OUTPUT +V 1,2 DC OUTPUT -V 3,4
Universal Input:
10
55
.5
85-264V AC, 120-370V DC full range, 1.6A @ 115V AC, 0.96A @ 230V AC Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 55.5x125x100mm (2.20x4.95x3.95 inches) Packaging: 1/box; 1.35lbs / 0.60Kg
PS-120 Series
(Switch Select)
12 5.2


10
65
.5
Switch select Input: 88-132V AC / 176-264 V AC, 248-370V DC range, 2.6A @ 115V AC, 1.6A @ 230V AC Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches) Packaging: 1/box; 1.75lbs / 0.79Kg
PSH-120 High Input Series
12
5.2
Terminal Pin. No Assign. (TB1) Assignment 1 FG 2 AC/N(L2) 3 AC/L(L1)

Universal Input:
Terminal Pin. No Assign. (TB2) Assignment 1,2 3,4
10
65
.5
340-550V AC, 480-780V DC range, 0.65A @ 400V AC, 0.6A @ 500V AC Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches) Packaging: 1/box; 1.65lbs / 0.75Kg
PSP-240 Series
25 .2


Universal Input:
10
12
5.5
85-264V AC, 120-370V DC full range, 2.8A @ 115V AC, 1.4A @ 230V AC Built in active Power Factor Correction function. PF>0.95 Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 125x125x100mm (4.95x4.95x3.95 inches) Packaging: 1/box; 2.7lbs / 1.2Kg Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
37
PS-75 Series
Specifications
Features:
Univers al AC input / full range Protections: Short Circuit / Over load / Overvoltage / Over temperature Cooling by free air convection DIN rail mountable UL508 (industrial control equipment) approved LED indicator for power on 100% full load burn-in test Fix switching frequency at 50KHz 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PS-7512
12V 6.3A 0 ~ 6.3A 76W 100mVp-p 12 ~ 14V 2.0% 0.5% 1.0% 1000ms, 60ms / 230VAC 60ms / 230VAC
PS-7524
24V 3.2A 0 ~ 3.2A 76.8W 150mVp-p 24 ~ 28V 1.0% 0.5% 1.0% 1800ms, 60ms / 115VAC at full load 12ms / 115VAC at full load
PS-7548
48V 1.6A 0 ~ 1.6A 76.8W 240mVp-p 48 ~ 53V 1.0% 0.5% 1.0%
INPUT
PROTECTION
85 ~ 264VAC 120 ~ 370VDC 47 ~ 63Hz 76% 1.6 A / 115VAC 0.96A / 230VAC COLD START 20A / 115VAC 1mA / 240VAC 105 ~ 150% rated output power
80% 40A / 230VAC
81%
15 ~ 16.5V
29 ~ 34V
58 ~ 65V
85C 5C (TSW1) detect on heat sink of power transistor

Protection type: Shut down overvoltage, recovers automatically after temperature goes down
ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
-10 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC Compliance to EN55011; EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2) heavy industry level; criteria A
SAFETY & EMC
OTHERS
123.1K hrs min. MIL-HDBK-217K (25C) 55.5x125.2x100mm (WxHxD) 0.6Kg; 20pcs / 13Kg / 1.29CUFT
38
55.5
1 2 3 4 3 2 1
125.2
TB2 LE D
Terminal Pin. No Assignment (TB1)

TB1
100

Pin No. 1,2 3,4 Assignment DC OUTPUT +V DC OUTPUT -V
Block Diagram
RECTIFIERS & FILTER RECTIFIERS & FILTER
I/P
EMI FILTER
POWER SWITCHING
+V -V
FG
DETECTION CIRCUIT O.L.P. O.T.P. PWM CONTROL O.V.P.
Derating Curve
100

100
24V,48V
90
80
LOAD (%)
LOAD (%)
50 60 (VERTICAL)
12V
80 70 60 50
60 40
20
40 0 10 20 30 45
-10
85
90
105
125
145
165
185
205
225
245 265

39
PS-120 Series
Specifications
Features:
Universal AC input / full range Protections: Short Circuit / Over load / Overvoltage/Over temperature Cooling by free air convection DIN rail mountable TS-35/ 7.5 or 1 5 UL 508 (industrial control equipment) approved LED indicator for power on 100% full load burn-in test Fix switching frequency at 50KHz 3 year warranty
SWITCH SELECT
110/220V
OUTPUT
Cat. No.
PS-12012
12V 10A 0 ~ 10A 120W 80mVp-p 12 ~ 14V 2.0% 0.5% 1.0% 500ms, 70ms / 230VAC 36ms / 230VAC
PS-12024
24V 5A 0 ~ 5A 120W 80mVp-p 24 ~ 28V 1.0% 0.5% 1.0% 500ms, 70ms / 115VAC at full load 32ms / 115VAC at full load 248 ~ 370VDC
PS-12048
48V 2.5A 0 ~ 2.5A 120W 100mVp-p 48 ~ 53V 1.0% 0.5% 1.0%
INPUT
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PROTECTION
88 ~ 132VAC / 176 ~ 264VAC by switch 47 ~ 63Hz 80% 84% 2.6 A / 115VAC 1.6A / 230VAC COLD START 20A / 115VAC 40A / 230VAC 3.5mA / 240VAC 105 ~ 150% rated output power
85%
15 ~ 16.5V 85C 5C (TSW1)
29 ~ 33V 90C 5C (TSW1)
58 ~ 65V 90C 5C (TSW1)
Protection type: Shut down overvoltage, re-power on to recover Protection type: Shut down overvoltage, recovers automatically after temperature goes down
ENVIRONMENT
SAFETY & EMC
-10 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 UL60950-1 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC Compliance to EN55011; EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2); heavy industry level; criteria A
OTHERS
136.8K hrs min. MIL-HDBK-217K (25C) 65.5x125.2x100mm (WxHxD) 0.79Kg; 20pcs / 16.5Kg / 1.29CUFT
40
100
TB2 1 2 3 4 230VAC
125.2
115VAC
TB1
1 2 3
65.5
LE D


Block Diagram
230 115
RECTIFIERS & FILTER RECTIFIERS & FILTER
I/P
EMI FILTER
POWER SWITCHING
+V -V
FG
DETECTION CIRCUIT O.L.P. O.T.P. PWM CONTROL O.V.P.
Derating Curve
100
Static Characterisitcs (24V)

Ta=25
28
80
300 250 200 150 100 80
LOAD (%)
60 40
LOAD (%)
24 20 16 12
12V,24V
20
8
-10 0 10 20 30 45 50 60 (VERTICAL)
80 160
85 170
90 180
95 190
100 200
105 210
110 220
115 230
120 240
125 250
130 260

41
OUTPUT RIPPLE (mVp-p)
48V
32
350
PSH-120 High Input Series

Specifications
Features:
Universal AC input / full range Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz 3 year warranty
HIGH INPUT
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME
PSH-12024
24V 5A 0 ~ 5A 120W 80mVp-p 24 ~ 28V 1.0%
PSH-12048
48V 2.5A 0 ~ 2.5A 120W 80mVp-p 48 ~ 55V 1.0% 0.5% 0.5% 1000ms, 120ms, 30ms / 500VAC at full load
0.5% 0.5% 1700ms, 120ms, 16ms / 400VAC 340 ~ 550VAC 480 ~ 780VDC 47 ~ 63Hz 85% 0.65A / 400VAC 0.6A / 500VAC COLD START 50A 3.5 mA / 530VAC 105 ~ 160% rated output power
INPUT
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (max.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
86%
PROTECTION
30 ~ 36V
59 ~ 66V
85C 5C (TSW: detect on heat sink of power switch)

ENVIRONMENT
SAFETY & EMC
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMS IMMUNITY
-20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL60950-1 approved IEC60950-1 CB approved by SIQ I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55011 (CISPR11); EN55022 (CISPR22); EN61204-3 Class B Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2; (EN50082-2), heavy industry level; criteria A
OTHERS
178.7K hrs min. MIL-HDBK-217K (25C) 65.5x125.2x100mm (WxHxD) 0.75Kg; 20pcs / 16Kg / 1.29CUFT
42
100
TB2 1 2 3 4 125.2 TB1 1 2 3 65.5 LED
1 2 3
Assignment FG AC/L2 AC/L1
Assignment 1,2 3,4
Block Diagram
EMI FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT O.L.P. O.T.P. PWM CONTROL O.V.P.
I/P
POWER SWITCHING
+V -V
FG
Derating Curve
100
80
60 50 40
20
43
PSP-240 Series
Specifications
Features:
Universal AC input / full range Built in active PFC function Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection DIN rail mountable UL 508(industrial control equipment)approved LED indicator for power on 100% full load burn-in test Fixed switching frequency at 100KHz 3 year warranty
OUTPUT
Cat. No.
PSP-24024
24V 10A 0 ~ 10A 240W 80mVp-p 24 ~ 28V 1.0%
PSP-24048
48V 5A 0 ~ 5A 240W 150mVp-p 48 ~ 53V 1.0% 0.5% 1.0% 800ms, 40ms / 115VAC at full load 24ms / 115VAC at full load 120 ~ 370VDC
0.5% 1.0% 800ms, 40ms / 230VAC 24ms / 230VAC 85 ~ 264VAC
INPUT
VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
Derating may be needed under low input voltages, please check the derating curve for more detail
PROTECTION
OVERLOAD OVERVOLTAGE OVERTEMPERATURE
47 ~ 63Hz 0.96 / 230VAC 0.99 / 115VAC at full load 84% 2.8A / 115VAC; 1.4A / 230VAC COLD START 27A / 115VAC 45A / 230VAC 3.5mA / 240VAC 105 ~ 150% rated output power
85%
30 ~ 36V
54 ~ 60V
100C 5C (TSW: detect on heat sink of power transistor)

ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING -10 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC Compliance to EN55011; EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2); heavy industry level; criteria A
SAFETY & EMC

SAFETY STANDARDS
OTHERS
MTBF DIMENSION PACKING 289.9K hrs min. MIL-HDBK-217K (25C) 125.5x125.2x100mm (WxHxD) 1.2Kg; 12pcs / 15.5Kg / 1.29CUFT
44
125.5
100
125.2
TB1 3 2 1
LED
TB2 4 3 2 1
1 2 3
Assignment 1,2 3,4
Block Diagram
RECTIFIERS & FILTER CONSTANT CURRENT LIMITING & DETECTION CIRCUIT O.V.P. O.T.P.
I/P
EMI FILTER & RECTIFIERS
PFC CIRCUIT
POWER SWITCHING
+V -V
FG
O.L.P.
PWM & PFC CONTROL
Derating Curve
100

Ta=25
100
230VAC
90
80
80
60
70
110VAC
40
60 50
20
40
-10 0 10 20 30 40 50 55 60 70 (VERTICAL) Vin: -- 230VAC 110VAC
85
100
110
135
155
230
264
45
480W Single Phase
POWER SUPPLIES
480W 220V AC Single Output DIN Rail Power Supply with PFC Function
Cat. No. 220V ONLY PSP-48024 PSP-48048 Output V DC A 24V DC 48V DC 20A 10A Tol. % 1% 1% Ripple & Noise 120 mVp-p 120 mVp-p Efficiency 89% 89% NOTES
480W Switch Select 110/220V AC Single Output DIN Rail Power Supply with PFC Function
SWITCH SELECT
110/220V
Cat. No.
Output V DC A 20A 10A
Tol. % 1% 1%
Ripple & Noise 120 mVp-p 120 mVp-p
Efficiency 89% 89%
NOTES
PSP-480S24 24V DC PSP-480S48 48V DC
46
SPECIFICATIONS
PSP-480 Series (220V AC input only)

TB1 Terminal Pin. No Assignment
Pin No. Assignment

Pin No. Assignment
1 2 3
AC/L AC/N FG
1,2 3,4
DC OUTPUT +V DC OUTPUT -V
12
5.2
22 10 0
Wide range Input: 180-264V AC only, 250-370V DC, 4A @ 230V AC Built in passive Power Factor Correction function compliance to EN61000-3-2, PF>0.7 Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 227x125x100mm (8.95x4.95x3.95 inches) Packaging: 1/box; 5.3lbs / 2.4Kg
PSP-480 with Switch Series (110V AC and 220V input AC)

Pin No. Assignment

Pin No. Assignment
1 2 3
AC/L AC/N FG
1,2 3,4
DC OUTPUT +V DC OUTPUT -V
12
5.2
22 10 0
Switch select Input: 90-132V AC / 180-264 V AC, 254-370V DC range 8A @ 115V AC, 3.2A @ 230V AC Built in passive Power Factor Correction function compliance to EN61000-3-2, PF>0.7/230V AC only Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 227x125x100mm (8.95x4.95x3.95 inches) Packaging: 1/box; 5.8lbs / 2.6Kg
47
PSP-480 Series
Specifications
220V ONLY
Features:
Built-in passive PFC function compliance to EN61000-3-2 High efficiency 89% and low dissipation Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
PSP-48024
24V 20A 0 ~ 20A 480W 120mVp-p 24 ~ 28V 1.0% 0.5% 1.0% 1200ms, 40ms / 230VAC at full load 16ms / 230VAC
PSP-48048
48V 10A 0 ~ 10A 480W 120mVp-p 48 ~ 53V 1.0% 0.5% 1.0%
INPUT
PROTECTION
VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
180 ~ 264 VAC by switch 250 ~ 370VDC 47 ~ 63Hz 0.7 89% 4A / 230VAC COLD START 27A / 115VAC 45A / 230VAC 3.5mA / 240VAC 105 ~ 150% rated output power
30 ~ 36V
54 ~ 60V

ENVIRONMENT
SAFETY & EMC
-20 ~ +70C (Refer to output load derating curve) 20 ~ 95% RH non-condensing -20 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22); Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61000-6-2 (EN50082-2); heavy industry level; criteria A
OTHERS
180.9K hrs min. MIL-HDBK-217K (25C) 227x125.2x100mm (WxHxD) 2.4Kg; 6pcs / 15Kg / 1.75CUFT
48
227 100
TB1 3 2 1
LE D
TB2 4 3 2 1

Pin No. 1 2 3 Assignment AC/L AC/N FG

Block Diagram
EMI FILTER PASSIVE PFC RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT PWM CONTROL O.V.P. +V -V
I/P
FG
O.L.P. O.T.P.
Derating Curve
100

100 90
80
LOAD (%)
LOAD (%)
80 70 60 50
60 40
20
40 0 10 20 30 40 50 60 70 (VERTICAL)
-20
180
125.2
190
200
264
49
PSP-480S Series
Specifications
SWITCH SELECT
Features:
AC input range selectable by switch Built-in passive PFC function compliance to EN61000-3-2 High efficiency 89% and low dissipation Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 year warranty
110/220V
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PSP-480S24
24V 20A 0 ~ 20A 480W 120mVp-p 24 ~ 28V 1.0%
PSP-480S48
48V 10A 0 ~ 10A 480W 120mVp-p 48 ~ 55V 1.0%
INPUT
0.5% 0.5% 1.0% 1.0% 1200ms, 40ms / 230VAC 1200ms, 40ms / 115VAC at full load 23ms / 230VAC 23ms / 115VAC at full load 90 ~ 132VAC / 180 ~ 264 VAC by switch 254 ~ 370VDC 47 ~ 63Hz 0.7 / 230VAC only 89% 8A / 115VAC 3.2A / 230VAC COLD START 27A / 115VAC 45A / 230VAC 3.5mA / 240VAC 105 ~ 150% rated output power
PROTECTION
30 ~ 36V
59 ~ 66V

ENVIRONMENT
SAFETY & EMC
-20 ~ +70C (Refer to output load derating curve) 20 ~ 95% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 EN60950-1 approved I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25C / 70% RH Compliance to EN55011 (CISPR11); EN55022 (CISPR22); EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2 (EN50082-2); heavy industry level; criteria A
OTHERS
187.9K hrs min. MIL-HDBK-217K (25C) 227x125.2x100mm (WxHxD) 2.6Kg; 6pcs / 16.6Kg / 1.75CUFT
50
227 100
56.6 10 6 125.2 12 230VAC 115VAC
TB1 3 2 1
LE D
TB2 4 3 2 1

Pin No. 1 2 3 Assignment AC/L AC/N FG

Block Diagram
230 115
EMI FILTER PASSIVE PFC RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT PWM CONTROL O.V.P. +V -V
I/P
FG
O.L.P. O.T.P.
Derating Curve
100

100 90
180 ~ 264VAC 90 ~ 132VAC
80
80
LOAD (%)
LOAD (%)
0 10 20 30 40 50 60 70 (VERTICAL)
60 40
70 60 50 40
20
-20
90 180
100 190
115 230
132 264
51
240-960W Three Phase
POWER SUPPLIES
240W Three Phase Industrial DIN Rail Power Supply

Cat. No. PST-24024 PST-24048 Output V DC A 24V DC 48V DC 10A 5A Tol. % 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p Efficiency 89% 89% NOTES

Cat. No. PST-48024 PST-48048 Output V DC A 24V DC 20A 48V DC 10A Tol. % 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p Efficiency 89% 90% NOTES

Cat. No. PST-96024 PST-96048 Output V DC A 24V DC 40A 48V DC 20A Tol. % 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p Efficiency 91% 92% NOTES

with PFC and Parallel Function (1+1) Cat. No. PST-960P24 PST-960P48 Output V DC A 24V DC 40A 48V DC 20A Tol. % 1% 1% Ripple & Noise 80 mVp-p 80 mVp-p Efficiency 91% 92% NOTES
52
SPECIFICATIONS
PST-240 Series
Pin No. 1 2 3 4 Assignment FG AC/L3 AC/L2 AC/L1

Pin No. 1,2 3,4 Assignment DCOUTPUT +V DCOUTPUT -V
12
5.2
10
12
5.5
Three phase input: 340-550V AC wide range, 480-780V DC 0.95A @ 400V AC, 0.75A @ 500V AC Connection: Input - 4 poles, Output 4 poles screw terminal Size (WxHxD): 125x125x100mm (4.95x4.95x3.95 inches) Packaging: 1/box; 2.87lbs / 1.3Kg
PST-480 Series
Pin No. 1 2 3 4
12 5.2 27

Pin No. 1,2 3,4 Assignment DCOUTPUT +V DCOUTPUT -V
Assignment AC/L1 AC/L2 AC/L3 FG
2 10 0
Three phase input: 340-550V AC wide range, 480-780V DC 1.7A @ 400V AC, 1.3A @ 500V AC Connection: Input - 4 poles, Output 4 poles screw terminal Size (WxHxD): 227x125x100mm (9.95x4.95x3.95 inches) Packaging: 1/box; 5.5lbs / 2.5Kg
PST-960 Series
Pin No. 1 2 3 4
5.2
27 6

Pin No. 1,2,3 4,5,6 7 8 Assignment DCOUTPUT+ V DCOUTPUT - V GND P (Current Share)
Assignment AC/L1 AC/L2 AC/L3 FG
Parallel Only
12
10
Three phase input: 340-550V AC wide range, 2.4A @ 400V AC, 1.9A @ 500V AC Connection: Input - 4 poles, Output 6 poles screw terminal Size (WxHxD): 276x125x100mm (10.87x4.95x3.95 inches) Packaging: 1/box; 7.3lbs / 3.3Kg
53
PST-240 Series
Specifications
Features:
Three-Phase AC 340 ~ 550V wide range input High efficiency 89% and low dissipation Protections: Short Circuit / Overload / Overvoltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PST-24024
24V 10A 0 ~ 10A 240W 80mVp-p 24 ~ 28V 1.0%
PST-24048
48V 5A 0 ~ 5A 240W 80mVp-p 48 ~ 55V 1.0%
INPUT
0.5% 0.5% 0.5% 0.5% 1200ms, 40ms, 20ms / 400VAC; 800ms, 40ms, 40ms / 500VAC at full load Three Phase 340 ~ 550VAC (Dual Phase operation possible) Dual phase operation: derating of 20% is required 47 ~ 63Hz 89% 0.95A / 400VAC; 0.75 / 500VAC COLD START 50A 3.5 mA / 530VAC 105 ~ 150% rated output power
480 ~ 780VDC
PROTECTION
30 ~ 36V
59 ~ 66V
100C 5C (TSW) detect on heat sink of power switch

Protection type: Shut down overvoltage, re-power automatically after temperature goes down
ENVIRONMENT
-20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1approved UL60950-1 I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61000-6-2; (EN50082-2), EN61204-3; heavy industry level; criteria A,
SAFETY & EMC
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMS IMMUNITY
OTHERS
114.6K hrs min. MIL-HDBK-217K (25C) 125.5x125.2x100mm (WxHxD) 1.3Kg; 12pcs / 16.6Kg / 1.29CUFT
All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25C of ambient temperature.
54
125.5 100
TB1 4 3 2 1
LE D
TB2 4 3 2 1

Pin No. 1 2 3 4 Assignment FG AC/L3 AC/L2 AC/L1
125.5

Block Diagram
EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT O.L.P. O.T.P. PWM CONTROL O.V.P. +V -V
I/P
FG
Derating Curve
100

100 90
Three phase operation
80
80
LOAD (%)
LOAD (%)
Dual phase operation

70 60 50 40
60 40
20
-20
10
20
30
40
50
60
70 (VERTICAL)
340
355
370
385
400
415 430
460 475
490
505 520 550
55
PST-480 Series
Specifications
Features:
Three-Phase AC 340 ~ 550V wide range input High efficiency 89% and low dissipation Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PST-48024
24V 20A 0 ~ 20A 480W 80mVp-p 24 ~ 28V 1.0%
PST-48048
48V 10A 0 ~ 10A 480W 80mVp-p 48 ~ 55V 1.0%
INPUT
0.5% 0.5% 0.5% 0.5% 1200ms, 40ms, 16ms / 400VAC; 800ms, 40ms, 35ms / 500VAC at full load Three Phase 340 ~ 550VAC (Dual Phase operation possible) Dual phase operation: derating of 20% is required 47 ~ 63Hz 89% 90% 1.7A / 400VAC; 1.3A / 500VAC COLD START 50A 3.5mA / 530VAC 105 ~ 150% rated output power
480 ~ 780VDC
PROTECTION
30 ~ 36V
59 ~ 66V

ENVIRONMENT
-20 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1approved UL60950-1 I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C: 70% RH) Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2; (EN50082-2), heavy industry level; criteria A
SAFETY & EMC
OTHERS
91.1K hrs min. MIL-HDBK-217K (25C) 227x125.2x100mm (WxHxD) 2.5Kg; 6pcs / 16Kg / 1.75CUFT
56
227 100
TB1 4 3 2 1
LED
TB2 4 3 2 1

Pin No. 1 2 3 4 Assignment AC/L1 AC/L2 AC/L3 FG

Block Diagram
EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT O.L.P. O.T.P. PWM CONTROL O.V.P. +V -V
I/P
FG
Derating Curve
100

100 90 85 80
125.2
80
LOAD (%)
LOAD (%)

70 60 50
60 40
20
40
-20
10
20
30
40
50
60
70 (VERTICAL)
340
355
370
385
400
415 430
460 475
490
505 520 550
57
PST-960 Series
Specifications
Features:
Three-Phase AC 340 ~ 550V wide range input High efficiency 91% and low dissipation Protections: Short Circuit / Overload / Over Voltage / Overtemperature Optional parallel function(1+1) Cooling by free air convection DIN rail mountable UL 508(industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT
PST-96024 / PST-960P24*
24V 40A 0 ~ 40A 960W 80mVp-p
PST-96048 / PST-960P48*
48V 20A 0 ~ 20A 960W 80mVp-p
INPUT
24 ~ 28V 48 ~ 55V 1.0% 1.0% Tolerance: includes set up tolerance, line regulation and load regulation. 0.5% 0.5% 0.5% 0.5% 200ms, 60ms, 14ms / 400VAC 200ms, 60ms, 30ms / 500VAC at full load Three Phase 340 ~ 550VAC (Dual Phase operation possible in connecting L1, L3, FG)
Dual phase operation (connecting L1, L3, FG) is allowed under certain derating to output load. Please refer to the derating curves for details.
47 ~ 63Hz 91% 2A / 400VAC; COLD START 50A 3.5 mA / 530VAC
92% 1.6A / 500VAC
PROTECTION
OVERLOAD OVERVOLTAGE OVERTEMPERATURE
105 ~ 125% rated output power

Protection type: Constant current limiting, unit will shut down overvoltage after 3 sec., re-power on to recover
30 ~ 36V
59 ~ 66V
110C 5C (TSW1) detect on heat sink of power transistor 85C 5C (TSW2) detect on heat sink of power diode Protection type: Shut down overvoltage, recovers automatically after temperature goes down -20 ~ +60C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 approved UL60950-1 I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2; (EN50082-2), heavy industry level; criteria A
ENVIRONMENT
SAFETY & EMC
OTHERS
122.5K hrs min. MIL-HDBK-217K (25C) 276x125.2x100mm (WxHxD) 3.3Kg; 4pcs / 14.2Kg / 1.14CUFT
*Special order required. 58

276 100
TB1 4 3 2 1
ALARM LE D
TB2 6 5 4 3 2 1

Pin No. 1 2 3 4 Assignment AC/L1 AC/L2 AC/L3 FG

Pin No. 1,2,3 4,5,6 7 8 Assignment DCOUTPUT+ V DCOUTPUT - V P (Current Share) P (Current Share)
125.2
Parallel Only
Optional Parallel Function (1+1) - (Special order required)
PSU
PSU
TB1 4 3 2 1
LED
TB2 8 7 6 5 4 3 2 1
TB1 4 3 2 1
LED
TB2 8 7 6 5 4 3 2 1
+V LOAD
-V
Block Diagram
I/P EMI FILTER RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT O.V.P. +V -V
O.T.P. FG PHASE-SHIFT
Derating Curve
100

100 90
80
80
LOAD (%)
LOAD (%)

70 60 50 40
60 50 40
20
-20
10
20
30
40 45 50
60
70 (VERTICAL)
340
355
380
385
400
415430
460
475 490
505 520 550
59
High Efficiency Compact Housing Power Supply

This high performance single output compact DIN rail PS-C Series, with up-to-date circuit design, possess up to 94% of high efficiency and works within 110 ~150% rated output power for up to 3 seconds. With built-in active PFC function, PS-C Series is a full range AC input switching power supply that fulfills the requirement of EN61000-3-2 for harmonic current. The compact design helps save the precious space on the rail and also makes it up to 50% smaller in size compare to its predecessor model PS-Series. Meanwhile, PS-C also have 5~9% higher efficiency than corresponding models of the PS-Series, which response to the trend of green power with energy saving concept. Other standard functions include DC OK relay contact, on panel LED indicator, and protection for short-circuit, overload (constant current limiting, shut down if over 3 seconds), over voltage, and over temperature. To fulfill the requirements of marine and semi-conductor related usage, PS-C Series also complies with GL and SEMI F47 norms in addition to UL, CUL and CE certificates. Suitable applications are factory automation, semi-conductor fabrication equipment, marine related installation, and electromechanical applications.
Input voltage range: AC inrush current (typical):Cold start: DC adjustment range (typical): Overload protection (typical): Overvoltage protection (typical): 88-264V AC; 124-370V DC 65A at 230V AC (PSC-240) 12V: 12-14V, 24V: 24-28V, 48V: 48-55V, 110%-150% rated output power 14-17V for 12V model (PSW-120), 29-33V for 24V model 56-65V for 48V model 95C 5C (PSC-120/240); 105C 5C I/P-O/P:3KV AC, I/P-FG:1.5KV AC, O/P-FG:0.5KV AC, -25 to +70C (-4 to +158F), refer to output derating curve UL508; EN60950-1 compliant Compliance to EN55022 class B, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2, EN61204-3, heavy Industry level, SEMI F47, GL
Over temperature protection: Withstand voltage: Working temperature: Safety standards: EMC standards:
60
PS-C Series
ENERGY SAVER
Features: High efficiency up to 94% and low power dissipation Universal AC Input / Full Range 150% peak load capability Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Overvoltage / Over temperature Cooling by free air convection Din rail mountable LED indicator for power on UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Built-in DC OK relay contact 3 year warranty
Adjustable DC Output Voltage DC on LED signal
Rugged metal housing
CE Compliance UL508 Compliance Universal Input
Narrow for maximized panel space
61

COMPACT SIZE POWER SUPPLIES
ENERGY SAVER

Cat. No. PS-C12012 PS-C12024 PS-C12048 Output V DC A 12V DC 10A 24V DC 5A 48V DC 2.5A Tol. % 1% 1% 1% Ripple & Noise 100 mVp-p 100 mVp-p 120 mVp-p Efficiency 89% 91% 91% NOTES

Cat. No. PS-C24024 PS-C24048 Output V DC A 24V DC 10A 48V DC 5A Tol. % 1% 1% Ripple & Noise 100 mVp-p 120 mVp-p Efficiency 94% 94% NOTES

Cat. No. PS-C48024 PS-C48048 Output V DC A 24V DC 20A 48V DC 10A Tol. % 1% 1% Ripple & Noise 100 mVp-p 120 mVp-p Efficiency 94% 94% NOTES

with PFC and Parallel Function (1+7) Cat. No. PS-C480P24 PS-C480P48 Output V DC A 24V DC 20A 48V DC 10A Tol. % 1% 1% Ripple & Noise 100 mVp-p 120 mVp-p Efficiency 94% 94% NOTES
62
SPECIFICATIONS
PS-C120 Series
Pin No. 1 2 3
12 5.2

Pin No. Assignment Relay Contact 1,2 DC OUTPUT -V 3 DC OUTPUT +V 4
11
3.5
40
Universal Input: 88-264V AC, 124-370V DC full range, 1.4A/115V AC, 0.7A/230V AC Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 40x125.2x113.5mm (1.57x4.93x4.47 inches) Packaging: 1/box; 1.48lbs / 0.67Kg
PS-C240 Series
Pin No. 1 2 3
12 5.2

Pin No. Assignment Relay Contact 1,2 DC OUTPUT -V 3,4 DC OUTPUT +V 5,6
11
3.5
63
Switch select Input: 88-264V AC, 124-370V DC range, 2.6A/115V AC, 1.3A/230V AC Connection: Input - 3 poles, Output 6 poles screw terminal Size (WxHxD): 63x125.2x113.5mm (2.48x4.93x4.47 inches) Packaging: 1/box; 2.27lbs / 1.03Kg
PS-C480 Series
Pin No. 1 2 3
12 5.2

Pin No. Assignment DC OUTPUT +V 1,2 DC OUTPUT -V 3,4 Relay Contact 5,6 NC 7,8
For Parallel Model Terminal Pin. No Assign. (TB1)

12

Pin No. Assignment 1,2 DC OUTPUT +V DC OUTPUT -V 3,4 Relay Contact 5,6 P+ (current share)* 7 P- (current share)* 8 * Only parallel function.
8.5
85
.5
Pin No. 1 2 3
Universal Input: 90-264V AC, 127-370V DC full range, 5A/115V AC, 2.5A/230V AC Connection: Input - 3 poles, Output 12 poles screw terminal Size (WxHxD): 85.5x125.2x128.5mm (3.37x4.93x5.06 inches) Packaging: 1/box; 3.53lbs / 1.6Kg
63
PS-C120 Series
Specifications
ENERGY SAVER
Features:
High efficiency 91% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.93 Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection DIN rail mountable UL 508 (industrial control equipment) approved EN61000-6-2 (EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK CURRENT PEAK POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD
PS-C12012
PS-C12024
PS-C12048
48V 2.5A 0 ~ 2.5A 120W 3.75A
12V 24V 10A 5A 0 ~ 10A 0 ~ 5A 120W 120W 15A 7.5A 180W (3 sec.) 3 seconds max., please refer to peak loading curves 100mVp-p 100mVp-p 12 ~ 14V 1.0% 0.5% 1.0% 1500ms, 60ms / 230VAC 20ms / 230VAC 88 ~ 264VAC 24 ~ 28V 1.0% 0.5% 1.0% 3000ms, 60ms / 115VAC at full load 20ms / 115VAC at full load 124 ~ 370VDC
120mVp-p 48 ~ 55V 1.0% 0.5% 1.0%
INPUT
Deating may be needed under low input voltages, please check the derating curve for more detail
PROTECTION
47 ~ 63Hz 0.93 / 230VAC 0.96 / 115VAC at full load 89% 91% 1.4A / 115VAC 0.7A / 230VAC 35A / 115VAC 70A / 230VAC 1 mA / 240VAC
90.50%
Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down overvoltage 150% rated power, constant current limiting with auto-recovery within 3 seconds and shut down overvoltage after 3 seconds 14 ~ 17V 29 ~ 33V 56 ~ 65V

DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A
30VDC / 1A
30VAC / 0.5A RESISTIVE LOAD
ENVIRONMENT
WORKING TEMP.
-25 ~ +70C (Refer to output load derating curve)

Installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING
20 ~ 95% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC O/P-DC OK: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2); EN61204-3; heavy industry level; criteria A, SEMI F47, GL approved
SAFETY & EMC
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
OTHERS
289.9K hrs min. MIL-HDBK-217K (25C) 40x125.2x113.5mm (WxHxD) 0.67Kg; 20pcs / 14.4Kg / 1.16CUFT
64 12
TB2
40
1 2 3 4
113. 5
+V ADJ.
1 2 3
Assignment 1,2 3 4
125.2
DC OK Relay Contact
age.
Block Diagram
EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.C.P. U.V.P. FG PFC CONTROL O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. +V -V
I/P
Peak Loading
180W 180W
120W
60W
Derating Curve
150

Others
100 90
112.5
12V Others
80 70
100
75
Continuous
60
12V
50 40
60
-25
10
20
30
40
50 55 60
70 (VERTICAL)
88
TB1
1 2 3
100
110
135
155
230
264
65 12
PS-C240 Series
Specifications
ENERGY SAVER
Features:
High efficiency 94% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.93 Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection DIN rail mountable UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
PS-C24024
PS-C24048
24V 48V 10A 5A 0 ~ 10A 0 ~ 5A 240W 240W 15A 7.5A 360W (3 sec.) 3 seconds max., please refer to peak loading curves 100mVp-p 120mVp-p
24 ~ 28V 1.0% 0.5% 1.0% 1500ms, 60ms / 230VAC 20ms / 230VAC 88 ~ 264VAC
48 ~ 55V 1.0% 0.5% 1.0% 3000ms, 60ms / 115VAC at full load 20ms / 115VAC at full load 124 ~ 370VDC
INPUT
PROTECTION
47 ~ 63Hz 0.93 / 230VAC 0.99 / 115VAC at full load 94% After 30 minutes of burn-in. 2.6A / 115VAC 1.3A / 230VAC 33A / 115VAC 65A / 230VAC 1 mA / 240VAC Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down overvoltage with auto-recovery 150% rated power, constant current limiting with autorecovery within 2 seconds and shut down overvoltage after 2 seconds 29 ~ 33V 56 ~ 65V
Protection type: Shut down overvoltage with auto-recovery

ENVIRONMENT
DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A 30VDC / 1A 30VAC / 0.5A RESISTIVE LOAD WORKING TEMP. -25 ~ +70C (Refer to output load derating curve)
Installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended.
SAFETY & EMC
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
20 ~ 95% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC O/P-DC OK: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2), EN61204-3; heavy industry level; criteria A, SEMI F47, GL approved
OTHERS
66 12
113. 5
TB2 1 2 3 4 5 6
+V ADJ.
+
1 2 3
Assignment 1,2 3,4 5,6
125.2
1 TB1
63
DC OK Relay Contact
age.
Block Diagram
EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.C.P. U.V.P. FG PFC CONTROL O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. +V -V
I/P
Peak Loading
360W 360W
240W
120W
Derating Curve
150

100 90
112.5
80
100
70
75
Continuous
60 50
60
40
-25 0 10 20 30 40 50 60 70 (VERTICAL)
88
100
110
135
155
230
264
67 12
PS-C480 Series
Specifications
ENERGY SAVER
Features:
High efficiency 94% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.94 Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL 508(industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
OUTPUT
Cat. No.
PS-C48024
PS-C48048
24V 48V 20A 10A 0 ~ 20A 0 ~ 10A 480W 480W 30A 15A 720W (3 sec.) 3 seconds peak power max. and the average output power should not exceed the rate power 100mVp-p 120mVp-p
24 ~ 28V 1.2%
48 ~ 55V 1.0%
INPUT
0.5% 0.5% 1.0% 1.0% 1500ms, 150ms / 230VAC 3000ms, 150ms / 115VAC at full load 14ms / 230VAC at full load 90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz 0.94 / 230VAC 94%
0.99 / 115VAC at full load
After 30 minutes of burn-in
PROTECTION
5A / 115VAC 2.5A / 230VAC 40A / 115VAC 80A / 230VAC 0.8 mA / 240VAC Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down overvoltage with auto-recovery 150% rated power, constant current limiting with auto-recovery within 2 seconds and shut down overvoltage after 2 seconds 29 ~ 33V 56 ~ 65V
Protection type: Shut down overvoltage with auto-recovery on re-power on to recovery

ENVIRONMENT
DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A; 30VDC / 1A; 30VAC / 0.5A resistive load WORKING TEMP. -25 ~ +70C (Refer to output load derating curve)
SAFETY & EMC
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY
20 ~ 95% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC O/P-DC OK: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2), EN61204-3; heavy industry level; criteria A, SEMI F47, GL approved
OTHERS
112.9K hrs min. MIL-HDBK-217K (25C) 85.5x125.2x128.5mm (WxHxD) 1.6Kg; 8pcs / 13.8Kg / 0.9CUFT
68 12
128.5
TB2 1 2 3 4 5 6 7 8
1 2 3
DC OK Relay Contact
age.
Block Diagram
I/P
& RECTIFIERS
PFC CIRCUIT
POWER SWITCHING
RECTIFIERS & FILTER O.C.P.
TB1
85.5
1,2 3,4 5,6 7,8
125.2
Assignment
+ +V ADJ
NC
+V -V
U.V.P. FG PFC CONTROL
O.L.P. DETECTION CIRCUIT CONTROL O.V.P.
Peak Loading
720W 720W
480W
240W
Derating Curve
150

100 90
120
80
100
70
80
Continuous
60 50
60
40
-25 0 10 20 30 40 50 60 70 (VERTICAL)
90
100
110
135
155
230
264
69 12
PS-C480P Series
With Parallel Function
Features:
High efficiency 94% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.94 Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable Current sharing up to 380W (1+7) UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
Specifications
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK CURRENT PEAK POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD
PS-C480P24
24V 20A 0 ~ 20A 480W 30A 720W (3 sec.) 100mVp-p 24 ~ 28V 1.2% 0.5% 1.0% 1500ms, 150ms, 14ms / 230VAC 90 ~ 264VAC 47 ~ 63Hz 0.94 / 230VAC 94% 127 ~ 370VDC
PS-C480P48
48V 10A 0 ~ 10A 480W 15A
3 seconds peak power max. and the average output power should not exceed the rate power
120mVp-p 48 ~ 55V 1.0% 0.5% 1.0% 3000ms, 150ms / 115VAC at full load
INPUT
0.99 / 115VAC at full load
After 30 minutes of burn-in.
PROTECTION
5A / 115VAC 2.5A / 230VAC 40A / 115VAC 80A / 230VAC 0.6 mA / 240VAC Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down overvoltage with auto-recovery 150% rated power, constant current limiting with auto-recovery within 2 seconds and shut down overvoltage after 2 seconds 29 ~ 33V 56 ~ 65V
Protection type: Shut down overvoltage with auto-recovery on re-power on to recovery

ENVIRONMENT
CURRENT SHARING Please see function diagram DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A; 30VDC / 1A; 30VAC / 0.5A resistive load WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY -25 ~ +70C (Refer to output load derating curve)
SAFETY & EMC
20 ~ 95% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC O/P-DC OK: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2), EN61204-3; heavy industry level; criteria A, SEMI F47, GL approved
OTHERS
70
128.5 85.5
1 2 3 4 5 6 7 8
Terminal Pin No. Assignment (TB1)

Terminal Pin No. Assignment (TB2)

Pin No. 1,2 3,4 5,6 7 8 Assignment DC OUTPUT +V DC OUTPUT -V Relay Contact P+ (current share) P- (current share)
TB2
DC OK
125.2
DC OK
+
+V A D J
DC OK Relay Contact
Contact Close Contact Open Contact Ratings (max.) When the output voltage reaches the adjusted output volt age. When the output voltage drop below 90% output voltage. 30V/1A resistive load
Peak Loading
(1) 720W (2) 720W
480W
50 sec. 3 sec.
240W
15 sec. 3 sec.
TB1
DC OK
Block Diagram
I/P EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.C.P. U.V.P. FG PFC CONTROL O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. +V -V
Function Diagram
1. Current sharing (1)Parallel operation is available by connecting the units shown as below (P+,P- are connected mutually in parallel): (2)The voltage difference among each output should be minimized that less than 2% is required. (3)The total output current must not exceed the value determined by the following equation (Output current at parallel operation) =(The rated current per unit) x (Number of unit) x 0.9. (4) In parallel operation 8 units is the maximum, please consult the manufacture for other applications. (5) When in parallel operation, the minimum output load should be greater than 3% of total output load. (Min. load > 3% rated current per unit x number of unit)
LOAD
+ - DC OK P+ P-
+ - DC OK P+ P-
+ - DC OK P+ P-
+ - DC OK P+ P-
+ - DC OK P+ P-
+ - DC OK P+ P -
+ - DCOK P+ P -
+ - DCOK P+ P -
PSU
PSU
PSU
PSU
PSU
PSU
PSU
PSU
Derating Curve
150

100 90
120
For3 sec. (typ.)
80 70
100
80
Continuous
60 50
60
40
0 10 20 30 40 50 60 70 (VERTICAL)
-25
90
100
110
135
155
230
264
71
Wide Input Compact Housing Power Supply

With the PSW family, AC/DC compact DIN rail switching power supplies with single phase wide input range, Altech further expanded the power supply line. Built-in active PFC function, these high efficient power units meet the harmonic current limitation per EN61000-3-2. Equipped with 180 to 550Vac single phase wide input range, they can be used in general power system applications with single phase 230Vac input or can capture two phases from the 220~550Vac three-phase power system, which can greatly increase the flexibility of system deployment. With up-to-date circuit design PSW series possess up to 93% of extremely high efficiency and can provide 100% power continuously at 50*C by only free air convection, or operate under 70*C ambient temperature by suitable power derating. The compact design in width helps save the precious space on the rail and also makes it up to 50% smaller in size compare to its predecessor models. Meanwhile, with wider input range the PSW series also has 3% higher efficiency than corresponding models, which response to the trend of green power with energy saving concept. Other standard functions include DC OK relay contact alarm signal output, front panel DC voltage adjustment , as well as protection for short-circuit, overload (constant current mode, shut down if over 3 seconds), over voltage, and over temperature. The PSW series comply with UL508, IEC60950-1 (CB), and CE certificates and also meet the EMC requirements of heavy industrial immunity level (EN61000-6-2). Suitable applications include industrial control system, semi-conductor fabrication equipment, factory automation, electromechanical applications, and marine related installation.
Input voltage range: 180~550V AC; 254-780V DC AC inrush current (typical):Cold start: 50A at 400V AC DC adjustment range (typical): 12V: 12-15V, 24V: 24-29V, 48V: 48-58V, Overload protection (typical): 105%-130% rated output Over-voltage protection (typical): 16-18V for 12V model (PSW-120), 31-37V for 24V model; 60-67V for 48V model Setup, rise, time (typical): 2000ms, 70ms at full load and 230V AC (PSW-120) 2000ms, 150ms at full load and 230V AC (PSW240/480) Withstand voltage: I/P-O/P:3KV AC, I/P-FG:1.5KV AC, O/P-FG:0.5KV AC, Working temperature: -20 to +70C (-4 to +158F), refer to output derating curve (PSW-120) DC OK signal Relay contact Safety standards: UL508 (PSW-240 pending) EMC standards: Compliance to EN55011 (CISPR11), EN55022 class B, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy Industry Level criteria A Military standard: MIL-HDBK-217K
72 12
PSW Series
YGRENE REVAS
ENERGY SAVER
Single and two phase wide input range 180~550VAC Universal AC Input / Full Range High efficiency up to 93% and low power dissipation Protections: Short circuit / Overload / Overvoltage / Over temperature Cooling by free air convection DIN rail mountable UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
Multible output connector for easy wiring Adjustable DC Output Voltage DC on LED signal
Rugged metal housing
CE Compliance UL508 Compliance Universal Input
73 12

WIDE INPUT POWER SUPPLIES
YGRENE REVAS
ENERGY SAVER

Cat. No. PSW-12012 PSW-12024 PSW-12048 Output V DC A 12V DC 10A 24V DC 5A 48V DC 2.5A Tol. % 1.5% 1% 1% Ripple & Noise 120 mVp-p 120 mVp-p 150 mVp-p Efficiency 89.5% 91% 92% NOTES

Cat. No. PSW-24024 PSW-24048 Output V DC A 24V DC 10A 48V DC 5A Tol. % 1% 1% Ripple & Noise 120 mVp-p 120 mVp-p Efficiency 90% 90% NOTES

(Also available with Optional Parallel Function (7+1)) Cat. No. PSW-48024 PSW-48048 Output V DC A 24V DC 20A 48V DC 10A Tol. % 1% 1% Ripple & Noise 100 mVp-p 120 mVp-p Efficiency 94% 94% NOTES
74 12
SPECIFICATIONS
PSW-120 Series
)2BT( .ngissA oN .niP lanimreT )1BT( .ngissA oN .niP lanimreT

Pin No. 1 2 3 Assignment FG AC/L2 AC/L1
5.2 12
11 3.5
40
PSW-240 Series

Pin No. 1 2 3 Assignment FG AC/L2 AC/L1
5.2 12
11 3.5
63
PSW-480 Series
5.5 8 2 5.8 1 2.5 21


5.2 12
12 8.5
5.5
tnemngissA .oN niP tcatnoC yaleR 2,1 V- TUPTUO CD 4,3 V+ TUPTUO CD 6,5
tnemngis A .oN niP GF 1 2L/CA 2 1L/CA 3
tnemngissA .oN niP tcatnoC yaleR 2,1 V- TUPTUO CD 3 V+ TUPTUO CD 4
tnemngis A .oN niP GF 1 2L/CA 2 1L/CA 3
)2BT( .ngissA oN .niP lanimreT
tnemngissA .oN niP V+ TUPTUO CD 2,1 V- TUPTUO CD 4,3 tcatnoC yaleR 6,5
tnemngissA .oN niP V+ TUPTUO CD 2,1 V- TUPTUO CD 4,3 tcatnoC yaleR 6,5
.noitcnuf lellarap ylnO *
ledoM lellaraP roF
)1BT( .ngissA oN .niP lanimreT
tnemngissA .oN niP GF 1 2L/CA 2 1L/CA 3
tnemngissA .oN niP GF 1 N/CA 2 L/CA 3
ledoM lellaraP roF
36
04
11 5.3
1 5.3
2.5 21
1 2.5 21

Pin No. Assignment Relay Contact 1,2 DC OUTPUT -V 3 DC OUTPUT +V 4
Universal Input: 180-550V AC, 254-780V DC full range, 0.55A/400V AC, 1.2A/230V AC Connection: Input - 3 poles, Output 4 poles screw terminal Size (WxHxD): 40x125.2x113.5mm (1.57x4.93x4.47 inches) Packaging: 1/box; 1.433lbs / 0.65Kg

Pin No. Assignment Relay Contact 1,2 DC OUTPUT -V 3,4 DC OUTPUT +V 5,6
Universal Input: 180-550V AC, 254-780V DC full range, 1A/400V AC, 2A/230V AC Connection: Input - 3 poles, Output 6 poles screw terminal Size (WxHxD): 63x125.2x113.5mm (2.48x4.93x4.47 inches) Packaging: 1/box; 2.337lbs / 1.06Kg

Pin No. Assignment DC OUTPUT +V 1,2 DC OUTPUT -V 3,4 Relay Contact 5,6
Pin No. 1 2 3

Pin No. Assignment 1,2 DC OUTPUT +V DC OUTPUT -V 3,4 Relay Contact 5,6 * Only parallel function.
Pin No. 1 2 3
Universal Input: 180-550V AC, 254-780V DC full range, 1.6A/400V AC, 4A/230V AC Connection: Input - 3 poles, Output 12 poles screw terminal Size (WxHxD): 85.5x125.2x128.5mm (3.37x4.93x5.06 inches) Packaging: 1/box; 3.748lbs / 1.7Kg
75 12
PSW-120 Series
Specifications
YGRENE REVAS
Features:
Single and two phase wide input range 180 ~ 550VAC Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection Built-in constant current limiting circuit DIN rail mountable UL508 (industrial control equipment) approved EN61000-6-2 (EN50082-2) industrial immunity level 100% full load burn-in test Built-in DC OK relay contact 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE HOLD UP TIME
PSW-12012
12V 10A 0 ~ 10A 120W 120mVp-p 12 ~ 15V 1.5% 0.5% 0.5% 2000ms, 70ms, 50ms / 400VAC
PSW-12024
24V 5A 0 ~ 5A 120W 120mVp-p 24 ~ 29V 1.0%
PSW-12048
48V 2.5A 0 ~ 2.5A 120W 150mVp-p 48 ~ 58V 1.0%
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
0.5% 0.5% 0.5% 0.5% 2000ms, 70ms, 10ms / 230VAC at full load
Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quick may lead to increase of the set up time.
INPUT
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE OVERTEMPERATURE
PROTECTION
180 ~ 550VAC 254 ~ 780VDC 47 ~ 63Hz 89.5% / 400V 91% / 400V 0.55A / 400VAC 1.2A / 230VAC COLD START 50A 3.5 mA / 530VAC 105 ~ 130% rated output power
92% / 400V
16 ~ 18V
31 ~ 37V
60 ~ 67V
105C 5C (12V), 110C 5C (24V) (TSW1) detect on heat sink of power switch transistor; 100C 5C (48V) (TSW1) detect on heat sink of power diode
ENVIRONMENT
DC OK SIGNNAL WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS
Relay contact rating (max.): 30V / 1A resistive -25 ~ +70C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Mounting clip: Compliance to IEC60068-2-6
SAFETY & EMC
UL508 approved IEC60950-1 compliant WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC (25C; 70% RH) EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2; (EN50082-2), heavy industry level; criteria A,
OTHERS
268K hrs min. MIL-HDBK-217K (25C) 40x125.2x113.5mm (WxHxD) 0.65Kg; 20pcs / 14Kg / 1.16CUFT
76
2.521
1 2 3
1 2 3 4
2BT
1BT
113. 5
1 2 3 4
DC OK +V ADJ. DC OK
125.2
1 2 3
40
TB1
TB2
+
Block Diagram
RECTIFIERS & FILTER RECTIFIERS & FILTER DETECTION CIRCUIT CURRENT LIMIT O.L.P. PWM CONTROL O.T.P. O.V.P.
Derating Curve
100
055 025
005
094 054
KO CD
V+ V-
004
063013
) 2 B T ( t n e m n g i s s A . o N n i P a n i m r eT l
scitsiretcarahC citatS
092
052
tnemngissA tcatnoC yaleR V- TUPTUO CD V+TUPTUO CD
NOITCETED TIUCRIC
SREIFITCER & R E TL I F
TNERRUC TIMIL
002
.P .V . O
.P .T . O
091
081
.oN niP 2,1 3 4
5 .311
001
04
05
06
07
08
09
REWOP GNIHCTIWS
) 1 B T ( t n e m n g i s s A . o N n i P a n i m r eT l
) L A C I TR E V ( 0 7
MWP LORTNOC
srehtO
tnemngissA GF 2L/CA 1L/CA
06
+
.P . L . O
KO CD .JDA V+
KO CD
04
05
V21
.oN niP 1 2 3
04
03
noitacificepS lacinahceM
IME R E TL I F
02
01
evruC gnitareD
margaiD kcolB
P/I
GF
52001 02 04 06 08
Terminal inNo. Assignment (TB1) P

PinNo. 1 2 3 Assignment FG AC/L2 AC/L1
Terminal inNo. Assignment (TB2) P

PinNo. Assignment 1,2 RelayContact DC OUTPUT -V 3 DC OUTPUT+V 4
DC OK
I/P
EMI FILTER
POWER SWITCHING
+V -V
FG
Static Characteristics
Others
100 90
80
80
60 40
12V
70 60 50
20
40
-25
10
20
30
40
50
60
70 (VERTICAL)
180
190
200
250
290
310360
400
450 490
500 520 550
77
PSW-240 Series
Specifications
YGRENE REVAS
Features:
Single and two phase wide input range 180~550VAC High efficiency 91% and low power dissipation Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection DIN rail mountable UL 508 (industrial control equipment) approved EN61000-6-2 (EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE
PSW-24024
24V 10A 0 ~ 10A 240W 150mVp-p 24 ~ 28V 1.0% 0.5% 1.0% 800ms, 150ms, 18ms / 400VAC 180 ~ 550VAC 47 ~ 63Hz 91% 1A / 400VAC COLD START 50A 3.5 mA / 530VAC 254 ~ 780VDC
PSW-24048
48V 5A 0 ~ 5A 240W 150mVp-p 48 ~ 55V 1.0% 0.5% 1.0% 1500ms, 150ms, 18ms / 230VAC at full load
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
INPUT
Derating may be needed under low input voltage. Please check the derating curve for more details
2A / 230VAC
PROTECTION

Protection type: Constant current limiting, unit will shut down after 3 sec.; auto recovery after 1 minute if the fault condition is removed
29 ~ 33V
56 ~ 65V
Protection type: Shut down overvoltage, re-power on to recovery Under over-voltage condition, If input voltage 200VAC, the power supply will shut down and then may have auto-recovery after several seconds
OVERTEMPERATURE
ENVIRONMENT
90C 5C (TSW) detect on heat sink of power switch Protection type: Shut down overvoltage, recovers automatically after temperature goes down DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A; 30VDC / 1A; 30VAC / 0.5A resistive load WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS -30 ~ +70C (Refer to output load derating curve)
SAFETY & EMC
20 ~ 95% RH non-condensing -40 ~ +85C; 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 approved IEC 60950-1 compliant Design refer to GL I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG :0.5KVAC O/P-DC OK: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) EN55022 (CISPR22), Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN 55024; EN61000-6-2; (EN50082-2); EN61204-3; heavy industry level; criteria A approved;
OTHERS
78
1BT
2.521
2BT
1 2 3 4 5 6
1 2 3 4 5 6
TB2
125.2
TB1
63
1 2 3
Block Diagram
DC OK Relay Contact
Derating Curve
100
5 .311
.JDA V+
055
V+ V-
005
054
NOITCETED TIUCRIC
.P . C . O
004
.P .V . O
egatloV tupnI SV gnitareD tuptuO
003
tnemngissA
002
081 001 09 05 06 07 08 04
2,1 4,3 6,5
CFP & MWP LORTNOC
REWOP GNIHCTIWS
) L A C I TR E V 0 7 (
.P . L . O
06
36
05
.P .V . U
04
1 2 3
CFP LORTNOC
CFP TIUCRIC
03
02
01
tcatnoC yaleR KO CD
RETLIF IME & SREIFITCER
evruC gnitareD
margaiD kcolB
03001 02 04 06 08
P/I
GF
113. 5
+V ADJ.
I/P
EMI FILTER & RECTIFIERS
PFC CIRCUIT
POWER SWITCHING
RECTIFIERS & FILTER O.C.P.
+V -V
U.V.P. FG PFC CONTROL
O.L.P. PWM & PFC CONTROL
DETECTION CIRCUIT
O.V.P.

100 90
80
80
60
70 60 50
40
20
40
-30 0 10 20 30 40 50 60 70 (VERTICAL)
180
200
300
400
450
500
550
79
PSW-480 Series
Specifications
YGRENE REVAS
Features:
Single and two phase wide input range 180~550VAC High efficiency 93% and low power dissipation Protections: Short Circuit / Overload / Over Voltage / Overtemperature Cooling by free air convection DIN rail mountable UL 508(industrial control equipment) approved EN61000-6-2 (EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 3 year warranty
ENERGY SAVER
OUTPUT
Cat. No.
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD UP TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERVOLTAGE
PSW-48024
24V 20A 0 ~ 20A 480W 100mVp-p 24 ~ 28V 1.0% 0.5% 1.0% 800ms, 150ms, 18ms / 400VAC 180 ~ 550VAC 47 ~ 63Hz 92% 1.6A / 400VAC COLD START 50A 3.5 mA / 530VAC 254 ~ 780VDC
PSW-48048
48V 10A 0 ~ 10A 480W 150mVp-p 48 ~ 55V 1.0% 0.5% 1.0% 2000ms, 150ms, 16ms / 230VAC at full load
CME & YTEFAS
TNEMNORIVNE
NOITCETORP
SREHTO
TUPTUO TUPNI
INPUT
Derating may be needed under low input voltage. Please check the derating curve for more details
93% 4A / 230VAC
PROTECTION

Protection type: Constant current limiting, unit will shut down after 3 sec.; auto recovery after 1 minute if the fault condition is removed
29 ~ 33V
56 ~ 65V
Protection type: Shut down overvoltage; auto recovery after 1 minute if the fault condition is removed Under over-voltage condition, If input voltage 200VAC, the power supply will shut down and then may have auto-recovery after several seconds.
OVERTEMPERATURE

ENVIRONMENT
DC OK RELAY CONTACT RATINGS (max.) 60VDC / 0.3A; 30VDC / 1A; 30VAC / 0.5A resistive load WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING SAFETY STANDARDS -30 ~ +70C (Refer to output load derating curve)
SAFETY & EMC
20 ~ 95% RH non-condensing -40 ~ +85C; 10 ~ 95% RH 0.03% / C (0 ~ 50C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 UL508 approved IEC 60950-1 compliant Design refer to GL I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25C; 70% RH) EN55022 (CISPR22), EN61204-3 Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN 55024; EN61000-6-2; (EN50082-2); EN61204-3; heavy industry level; criteria A approved;
OTHERS
80
1BT
2.521
2BT
1 2 3 4 5 6
125.2
TB2
1 2 3 4 5 6
TB1
85.5
FG PFC CONTROL PWM & PFC CONTROL
V+ V-
055
005
054
NOITCETED TIUCRIC
.P . C . O
004
egatloV tupnI SV gnitareD tuptuO
.P .V . O
003
002
tnemngissA
081
5.821
001
05
06
07
08
09
04
2,1 4,3 6,5
CFP & MWP LORTNOC
REWOP GNIHCTIWS
) L A C I TR E V (
07
.P . L . O
06
5.58
JDA V+ +
05
.P .V . U
04
CFP LORTNOC
1 2 3
CFP TIUCRIC
03
02
tcatnoC yaleR KO CD
01
RETLIF IME & SREIFITCER
evruC gnitareD
margaiD kcolB
03001 02 04 06 08
P/I
GF
128.5
+ +V ADJ
1 2 3
Block Diagram
EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.C.P. U.V.P. O.L.P. DETECTION CIRCUIT O.V.P. +V -V
I/P
DC OK Relay Contact
Derating Curve
100

100 90
80
80
60
70 60 50
40
20
40
-30 0 10 20 30 40 50 60 70 (VERTICAL)
180
200
300
400
450
500
550
81
Accessories
Power Supply Redundancy Buffer Module PS-RDN20 is a 20A redundancy (decoupling) module for the 24V DC power system. Containing 2 sets of 20A Or-ing diodes with wonderful heat dissipation deployment, PS-RDN20 give you a new option for safe connection of 1+1 redundant set-up. Not only perfectly decouple power sources from each other as well as from the load, PS-RDN20 also provides users monitoring signals for both input channels through the built-in relays. Since theres no switching components inside the module, PS-RDN20 will not arise additional EMI issues and should provide you a worry-free application platform! DC input voltage range Reverse voltage DC output current DC output voltage drop Input voltage alarm Relay contact rating Working Temperature EMC standards Connection 21~28V, 20A max. x 2 channels 30V 20A max. 0.5V max. When input is > 20V(5%) or <30V(5%), relay contacts 30VDC, 1A -20~+70C EN55022 class B, EN61000-4-2,3,4,5,6,8, ENV50204 I/P: 4 poles, O/P: 2 poles screw DIN terminal, Single output: 4 poles
UPS Battery Module PS-UPS40 is a 40A max. DC UPS (battery control) module for the 24 V DC power system. Accompany with external batteries, it can back-up up to 40A of current to critical loads for certain period of time depending on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge and the repeated Battery Test function to check the situation of external batteries. Users can customize their own DC UPS system to back up critical loads and capture the status of the whole system easily. DC input / DC bus Battery inout voltage Battery input current Charge current (typ.) External battery (typ.) DC bus ok Battery fail 24~29V, 40A max. 21~29V 0~40A 2A 24V, 4AH / 7AH / 12AH Relay status: Short when DC voltage between 21~29V(3%), relay contacts Relay status: Short when battery failure is observed through the battery test function, relay contacts LED (red): Battery over-discharge warning or battery broken: light; battery OK: dark Relay status: Short when battery in discharge condition, relay contacts LED (yellow): Battery discharging: light; battery is not discharging or discharging current <2A: dark -20~+70C EN55022 class B, EN61000-4-2,3,4,5,6,8, ENV50204 I/P: 2 poles, O/P: 2 poles screw DIN terminal, Single output: 6 poles
Battery discharge
Working temperature EMC standards Connection
82
Redundancy Buffer Module UPS Battery Module
Redundancy Buffer Module Features:

Suitable for redundant operation of 24V system Installed on 35 x 7.5 mm or 35 x 15 mm DIN Rail Relay contact signal output and LED indicator for input failure alarm Cooling by free air convection 3 year warranty
UPS Battery Module Features:

Battery controller for DIN Rail UPS system Installed on 35 x 7.5 mm or 35 x 15 mm DIN Rail Parallel connection to DC BUS Suitable for 24V system up to 40A Built-in battery test function Battery polarity protection Relay contact signal output and LED indicator for DC BUS OK, battery fail and battery discharge Cooling by free air convection 3 year warranty
35mm DIN Rail mounting
Alarm A and B Relay Contact LED indicator for input failure alarm (or DC BUS OK) Easy to understand layout panel CE Compliance
Input Terminals Rugged metal housing
83
Accessories
REDUNDANCY BUFFER MODULE UPS MODULE
Power Supply Redundancy Buffer Module

PS-RDN20 is a 20A redundancy (decoupling) module for the 24V DC power system. Containing 2 sets of 20A Oring diodes with excellent heat dissipation deployment. PSRDN20 give you a new option for safe connection of 1+1 redundant set-up. Not only perfectly decouple power sources from each other as well as from the load, PS-RDN20 also provides users monitoring signals for both input channels through the built-in relays. Since theres no switching components inside the module, PS-RDN20 will not arise additional EMI issues and should provide you a worry-free application platform!
Cat. No. PS-RDN20 Voltage Range 21-28V DC Current Range 0-20A NOTES
Connection: Terminal 1 - 4 poles, Terminal 2 - 6 poles Size (WxHxD): 55.5x125x100mm (2.19x4.95x3.95 inches) Packaging: 1/box; 1.1lbs / 0.5Kg
DC Fail Block Diagram
40 AMP UPS Battery Controller

PS-UPS40 is a 40A max. DC UPS (battery control) module for the 24 V DC power system. Accompany with external batteries, it can back-up up to 40A of current to critical loads for certain period of time depending on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge and the repeated Battery Test function to check the situation of external batteries. Users can customize their own DC UPS system to back up critical loads and capture the status of the whole system easily.
Cat. No. PS-UPS40 Voltage Range 21-29V (Battery) 24-29V (DC) Current Range 0 - 40A NOTES
Connection: Terminal 1 - 4 poles, Terminal 2 - 6 poles Size (WxHxD): 55.5x125x100mm (2.19x4.95x3.95 inches) Packaging: 1/box; 1.21lbs / 0.55Kg
84
SPECIFICATIONS PS-RDN20 Series

Terminal Pin. No Assign. (TB1) Assignment Vout+ 1 Vout2 Vin3,4 5 Vin A+ 6 Terminal Pin. No Assign. (TB2)
Assignment
10 0 5 5.5
Derating Curve
100
80
LOAD (%)
60 40
12
5.2
1 2 3 4
20
Alarm A1 Alarm A2
-10
10
20
30
40
50
60
70 (VERTICAL)
Applications:
PS U PSU PSU PS U PS U PS U PS U PSU PSU Vin A Vin A Vin A
PS U
..............
Vin A Vin A
Vout Vout Load Load Vout Vout Vout Load
Vout
PS-UPS40 Series
1 2 3 4
12 5.2
Derating Curve
100
Assignment BATTERY INPUT + BATTERY INPUT -
80
LOAD (%)

Assignment 1 2 3 4 5 6
60 40
20
10
55
.5
-10
10
20
30
40
50
60
70 (VERTICAL)

2. Combine redundancy module (PS-RDN20) to back up AC interruption or failure of PSU
1. Backup connection for AC interruption
PS-UPS40 PSU 24V/40Amax

BAT + DC - +
PS-UPS40
PS-RDN20
24V Battery
Load
24V Battery
+
BAT DC - - +
Vout
PSU
+ - - - B+ A+ +
Vin
Load
85
PS-RDN20
Specifications
Features:
Suitable for redundant operation of 24V system Installed on DIN Rail TS35 / 7.5 or 15 Relay contact signal output and LED indicator for input failure alarm Cooling by free air convection 3 year warranty
OUTPUT
Cat. No.
REVERSE VOLTAGE (max.) OUTPUT CURRENT (max.) VOLTAGE DROP LED INDICATORS
PS-RDN20
30V 20A 0.5V Two green LEDs indicating each input is OK or fail
INPUT
INPUT VOLTAGE RANGE NUMBER OF INPUTS INPUT CURRENT (max.) 21 ~ 28V Two 20A per input When input is 20V (5%) or 30V (5%) relay contacts 30VDC, 1A
FUNCTION
INPUT VOLTAGE ALARM RELAY CONTACT RATING (max.)
ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY VIBRATION MOUNTING -20 ~ +70C 20 ~ 90% RH non-condensing -40 ~ +85C, 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6
SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMS IMMUNITY Terminal- Chassis: 0.5KVAC, Relay Contacts- Terminal: 0.5KVAC Terminal- Chassis: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,5,6,8; ENV50204; heavy industry level; criteria A,
OTHERS
MTBF DIMENSION PACKING 996.8Khrs min. MIL-HDBK-217K (25C) 55.5x125.2x100mm (WxHxD) 0.5Kg; 20pcs / 11Kg / 1.29CUFT
All parameters NOT specially mentioned are measured at 24V DC input, rated load and 25C of ambient temperature.
86
100
LED 125.2
Terminal Pin. No Assignment (TB1) Pin No. Assignment Vout+ 1 Vout2 Vin3,4 5 Vin B+ Vin A+ 6
1 2 3 4 5 6
55. 5
TB1
TB2
1 2 3 4
Terminal Pin. No Assignment (TB2) Pin No. Assignment Alarm B1 1 Alarm B2 2 Alarm A1 3 Alarm A2 4
Block Diagram
Vout+ Vin/VoutRELAY B + RELAY A Vin A+ Alarm A +
Derating Curve
100
80
60 40
20
-20
10
20
30
45
50
60
70
(VERTICAL)
87
PS-UPS40
Specifications
Features:
Battery controller for DIN Rail UPS system Parallel connection to DC BUS Suitable for 24V system up to 40A Installed on DIN Rail TS35/ 7.5 or 15 Built-in battery test function Battery polarity protection Relay contact signal output and LED indicator for DC BUS OK, Battery fail, and battery discharge Cooling by free air convection 3 year warranty
DC INPUT / DC BUS BATTERY IN / OUTPUT
Cat. No.
DC VOLTAGE (Typ.) RATED CURRENT
PS-UPS40
24 ~ 29V 40A
VOLTAGE RANGE (Typ.) CURRENT RANGE CHARGE CURRENT (Typ.) EXTERNAL BATTERY (Typ.)
21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V
FUNCTION
RELAY CONTACT RATING (max.) DC BUS OK BATTERY FAIL
30VDC, 1A Relay contact: Short when DC voltage between 21 ~ 29V (3%), relay contacts LED (Green): DC BUS OK: light; DC BUS fail: dark Relay contact: Short when battery failure is observed through the battery test function, relay contacts LED (Red): Battery over- discharge warning or battery broken: light; Battery OK: dark
Every 25 seconds, unit will send out test signal through Battery Fail relay contact and LED indicator once the battery is fail.
BATTERY DISCHARGE
Relay contact: Short when battery in discharge condition, relay contacts LED (Yellow): Battery discharging: light; Battery is not discharging or discharging current 2.0A: dark
ENVIRONMENT
WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY VIBRATION MOUNTING
-20 ~ +70C 20 ~ 90% RH -20 ~ +85C, 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6
SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMS IMMUNITY Terminal- Chassis: 0.5KVAC, Relay Contacts- Terminal: 0.5KVAC Terminal- Chassis: 100M Ohms / 500VDC (25C; 70% RH) Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,5,6,8; ENV50204; heavy industry level; criteria A
OTHERS
MTBF DIMENSION PACKING 161.9Khrs min. MIL-HDBK-217K (25C) 55.5x125.2x100mm (WxHxD) 0.55Kg; 20pcs / 12Kg / 1.29CUFT
All parameters NOT specially mentioned are measured at rated load and 25C of ambient temperature.
88
55. 5 100
125.2
LED 1 2 TB1 3
TB2
Terminal Pin. No Assignment (TB1) Pin No. Assignment BATTERY INPUT + 1 BATTERY INPUT 2 3 DC INPUT 4 DC INPUT +
1 2 3 4 5 6
Terminal Pin. No Assignment (TB2) Pin No. Assignment BAT DISC 1 1 BAT DISC 2 2 BAT OK 1 3 BAT OK 2 4 DC OK 1 5 DC OK 2 6
Block Diagram
LOAD + BAT. TEST 25Ax2 + CHARGE CIRCUIT LIMIT
24V BATTERY
INPUT POWER SUPPLY
DETECTION CIRCUIT
DISCHARGE
Derating Curve
100
80
60 40
20
-20
10
20
30
45
50
60
70
(VERTICAL)
Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com
89
Accessories
POWER SUPPLIES
DIN MOUNTING RAILS
Altech DIN Rails comply with DIN 50045, 50022 and 50035 Standards. The use of DIN Rails enhances design capabilities, saves space and reduces labor. Standard rails are made of steel with zinc plating and chromate passivation and are available in various configurations. DIN Rails are 35mm wide and available in 7.5 and 15mm depths. They are supplied in 1 m (3'3") and 2 m (66) lengths. Upon request they can be cut to custom lengths and punched with holes or perforations. DIN35 DIN35
(7.5 mm deep) Type Perforated Steel Cat. No. 2511120 2511120/1M 2511110 2511110/1M Length Std. Pk. 2m 1m 2m 1m 20 40 20 40 Type Perforated Steel Cat. No. CA701-15/S-2M CA701-15/S CA701-15-2M CA701-15
(15 mm deep) Length Std. Pk. 2m 1m 2m 1m 12 24 12 24
Unperforated Steel
Unperforated Steel
SUPPORT BRACKETS
Support Brackets elevate DIN Rails away from the panel to facilitate component mounting and to increase wiring access. Angled brackets tilt the rail by 45 to improve visibility. Straight brackets are available in three heights for optimum positioning of the rail. Brackets mount with 2 screws to any panel or flat surface and have tapped center holes for rail mounting. Bracket material is steel, zinc plated yellow chromate.
DIN35
DIN35
Cat. No. CA603
Std. Pk. 25
Height 1 2 3
Cat. No. CA703 CA803 CA903
Std. Pk. 25 25 25
90
END STOPS and SPACER

End Stops prevent power supplies and other DIN Rail mount components and devices from moving laterally on the rail. They are available in polyamide 6.6 and metal configurations for 35mm DIN rails. CA802 is a small endstop for the smaller power supplies. CA202 is a large endstop for larger power supplies. CA302 is used with 7.5mm deep DIN rail and the CA402 is used with 15mm deep rail. DIN Rail mountable spacers (CASP and 15.960) are generally used to ensure cooling space for the small power supply.
CA202
CA802
CA302
CA402
CASP
15.960
Polyamide 6.6 44.5 x 50 x 9.5 mm Cat. No. CA202 Std. Pk. 50
Polyamide 6.6 32 x 45 x 8 mm Cat. No. CA802 Std. Pk. 50
Steel 27 x 39.5 x 16 mm Cat. No. CA302 Std. Pk. 50
Steel 27 x 39.5 x 16 mm Cat. No. CA402 Std. Pk. 50
Polyamide 6.6 29 x 43 x 8 mm Cat. No. CASP Std. Pk. 50
Polyamide 6.6 69 x 55 x 9 mm Cat. No. 15.960 Std. Pk. 10
GROUND BLOCKS for DIN Rail

Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification.
CGT4N CGT6N CGT10U
AEx eII EEx eII Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals
C US C US C US
6 mm 45.4 x 54.2 mm 9 mm Polyamide 6.6 2 screw clamps
8 mm 47 x 54.5 mm 12 mm Polyamide 6.6 2 screw clamps
10 mm 49.5 x 45 mm 12 mm Polyamide 6.6 2 screw clamps
Wire Range Torque
22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.8 Nm 7 lb-in
22-8 AWG 14 lb-in
1.5-6 sq.mm 0.8 Nm
22-8 AWG 14 lb-in
22-6 AWG 1.5-10 sq.mm 16-8 AWG 14 lb-in 1.2 Nm 14 lb-in
91
Frequently Asked Questions

Notes on choosing a switching power supply? To increase the reliability of the switching power supply, we suggest users choose a unit that has a rating of 30% more power than actual need. For example, if the system needs a 90W source, we suggest that users choose a switching power supply with 120W of output power or more. By doing this, you can effectively boost the reliability of the switching power supply in your system. We also need to consider about ambient temperature of the switching power supply and whether there is additional device for dissipating the heat. If the switching power supply is working in a high temperature environment, we need to make some derating to the output power. The derating curve of "ambient temperature" versus "output power" can be found on our spec sheets. Choosing functions based on your application: Protection function: Overvoltage Protection (OVP) Overtemperature Protection (OTP) Overload Protection (OLP) Short Circuit Protection (SCP) Application function: Signaling Function (Power Good, Power Fail) DC OK Signal Special function: Power Factor Correction (PFC) Uninterruptible Power Supply (UPS) function Pick Load Capability Make sure that the model qualifies for the safety standards and EMC regulations you need. How do we choose a power supply to charge a battery? ALTECH does not have power supplies designed for battery charging. If you like to choose a Power Supply as a battery charger, our advice is to pick a power supply with over load protection (OLP) which mode is constant current limiting. The models in this mode provide constant current even when the protection circuit is triggered. The second choice is fold-back current limiting or constant wattage model. In this model, when a battery is running low, the output current of the power supply will gently increase. The level of increase depends on battery's capacity and degree of exhaustion. Hiccup or shut down model are not recommended because it will stop to generate current when OLP happens. Does Altech carry class 2 power supplies? Selected models of the Altech slim line series (PS-S) is NEC class 2 / LPS compliant, but they are not UL310 tested. More information can be found on the individual specification sheets. Can ALTECH's power supply be used in the range of 45Hz ~ 440Hz? If YES, what will happen? ALTECH's power supply can be used within this frequency range. But if the frequency is too low, the efficiency will also be lower. For example, when a PS-12024 is operated under 230VAC and rated load, if the frequency of AC input is 60 Hz, the efficiency is around 84%; however, if the frequency of AC input reduces to 50 Hz, the efficiency will be around 83.8%. If the frequency is too high, the power factor of the switching power supply with PFC (power factor correction) function will reduce and this also will cause higher leakage current. For example, when a PS12024 is operated under 230VAC and rated load, if the frequency of AC input is 60 Hz, the power factor is 0.93 and the leakage current is around 0.7mA; however, if the frequency of AC input increase to 440 Hz, the power factor will decrease to 0.75 and the leakage current will rise to around 4.3mA. If we need a 24V output power supply, but ALTECH does not have this model, can we use two 12V power supplies connecting in series instead of one 24V power supply? YES, basically you can do this to get the right output voltage, but be careful that the rated output current of the series system should be the rating of the minimum one in these series connected power supplies. Furthermore, we like you to parallel a diode at the output of power supply to prevent possible damage of internal capacitors.
92
Why I cannot turn on the power supply smoothly when the loads are motors, light bulbs or capacitive loads? If you connect the switching power supply to motors, light bulbs, or high capacitive loads, you will have a high output surge current when you turn on the S.P.S. and this high surge current will cause failure of start up. We suggest using switching power supply with over load protection and constant current limiting protection to deal with these loads. Why did the power supply shuts down during operation and after turning it off, I can restart the power supply again? In general there are two circumstances that will cause the power supply to shut down. The first one is the activation of the over-load-protection (OLP). To deal with this situation, we suggest increasing the rating of the output power or modifying the OLP point. The second one is the activation of over-temperature protection (OTP) when the internal temperature reaches the pre-set value. All of these conditions will let the switching power supply enter protection mode and shut down. After these conditions are removed, the switching power supply will be back to normal. The output ground (GND) and frame ground (FG) is the same point in my system, can ALTECH's power supplies be used in such system? Yes. Since our products are designed based on isolation concept, it will be no problem that the output ground (GND) and frame ground (FG) is the same point in your system. But, EMI may be affect by this connection. During the operation of ALTECH power supply, there is some leakage current on the case. Is this normal? Will this leakage current hurt human body? Due to the requirement of EMI, there will be some Y capacitors between line and neutral to the FG (case) to improve EMC. These Y capacitors will cause some leakage current flow from line or neutral to the case (normally case will be connected to earth ground). For example, IEC-60950-1 requires that this current should be less than 3.5mA for IT equipment, so basically the leakage current you find on the case will not hurt human body. Proper connection to Earth ground will solve the leakage current problem. What should be noticed when installing a power supply in vertical and horizontal directions? Most small wattage power supplies are mainly installed in the horizontal position. If you have to install it vertically because of mechanical limitation, you should consider the output derating due to the heat concern. The temperature derating curve can be found on the spec sheet. What is "Input - Inrush Current"? What will we notice? At input side, there will be (1/2 ~1 cycle, ex. 1/120 ~ 1/60 seconds for 60 Hz AC source) large pulse current (20~60A based on the design of S.P.S.) at the moment of power on and then back to normal rating. This "Inrush Current" will appear every time you turn on the power. Although it will not damage the power supply, we suggest not turning the power supply ON/OFF very quickly within a short time. Besides, if there are several power supplies turning on at the same time, the circuit breaker of AC source may shut off and go into protection mode because of the huge inrush current. It is suggested that these power supplies start up one by one if possible. What is PFC? PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.4~0.6 in non-PFC models. In PFC models, the power factor can reach above 0.95. The calculation formulas are as below: Apparent Power=Input Voltage x Input Current (VA) Real Power= Input Voltage x Input Current x Power Factor (W) From the environment friendly point, the electric power plant needs to generate a power which is higher than apparent power in order to steadily provide electricity to the market. The real usage of electricity should be defined by real power. Assuming the power factor is 0.5, the power plant needs to produce more than 2VA to satisfy 1W real power. On the contrary, if the power factor is 0.95, the power plant only needs to generate more than 1.06VA to provide 1W real power need. It will be more effective. What is the difference between -V, +V and COM which are marked on the output side? COM(COMMON) means common ground. Single output: Positive pole (+V), Negative pole (-V) +V; COM and V can be attained by using two switching power supplies in series. Example: (2x PS-S2012) + +
In ALTECH's catalog, we see AC and DC at input, what is it all about? Due to different circuit designs, ALTECH power supply's input consists of three types as below: (2=1,414 1.414 x AC = DC) +12V COM -12V A.85~264VAC;120~370VDC B.176~264VAC;250~370VDC C.85~132VAC/176~264VAC by Switch; 250~370VDC In the case of option A and B inputs models, power supply can work properly no matter under AC or DC input. Some models need correct connection of input poles, positive pole connects to AC/L; negative pole connects to AC/N. Others may require opposite connection, positive pole to AC/N; negative pole to AC/L. If customers make a wrong connection, the power supply will not be broken. You can just reverse the input poles and power supply will still work. In the case of option C input models, please make sure that you switch the 115/230V input correctly. If the switch is on the 115V side and the real input is 230V, the power supply will be damaged.
Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com
93
Frequently Asked Questions

Why the input voltage marked on the spec. sheet is 88~264 VAC while the label on the power supply says that it is 100~240VAC? During safety verification process, the agency will use a stricter standard -- 10%(IEC60950 uses +6%, -10%) of the input voltage range labeled on the power supply to conduct the test. So, operating at the wider input voltage range as specified on the spec. sheet should be fine. The narrower range of input voltage labeled on the power supply is to fulfill the test standard of safety regulation and make sure that users insert input voltage correctly. Will ALTECHs products with CE marking meet the EMC requirements after assembling into my system? We cannot guarantee 100% that the final system can still meet the EMC requirements. The location, wiring and grounding of the switching power supply in the system may influence its EMC characteristics. In different environment or applications, the same switching power supply may have different outcomes. Our test results are based on setup shown in the EMC report. What is different between information (EN60950-1) and medical (EN60601-1) safety standard? According to safety standard, the leakage current in EN60950-1 Class I cannot exceed 3.5mA. Many of ALTECHs power supplies meet this requirement but may not meet the EN60601-1. Others criteria like safe distance and numbers of fuse are also different. Please consult the diagram below:
Subjects Creepage distance/ Clearance distance Working Voltage: Max. 250Vrms Electric Strength Test
IEC60950-1 Basic Insulation Supplementary Insulation Basic Insulation Supplementary Insulation 2.5mm/2mm 5mm/4mm 1500Vac 3000Vac Handheld: 0.75mA CLASS I
IEC60601-1 4mm/2.5mm 8mm/5mm 1500Vac 4000Vac Leakage current of grounding Leakage current of grounding Leakage current of grounding 2 40C 0.3mA 0.1mA 0.1mA
Leakage Current CLASS II Number of Fuse The Lowest Ambient Temperature
Others: 3.5mA
0.25mA 1 Refer to the definition of Manufacturer
What is MTBF? Is it different from Life Cycle? MTBF and Life Cycle are both indicators of reliability. Altech uses MIL-HDBK-217F as the core of MTBF. An expected reliability is forecasted through accounting component's number. The exact meaning of MTBF is after continuously using of power supply in a certain time, the probability of operating properly is 36.8%e-1=0.368). If power supply is continuously used at double the MTBF time, the probability of operating properly becomes 13.5%e-2=0.135). Life Cycle is found through using the temperature rise of electrolytic capacitor to estimate the approximate life of power supply. For example, PS-S10 series MTBF=584K hours; electrolytic capacitor C108 Life Cycle=202K hours (Ta=45 C).
POWER SUPPLY LEGAL DISCLAIMER Power supply data sheet specifies devices but can not promise to deliver any specific characteristics. No warranty or guaranty is given regarding performance or suitability. The customer shall test and ensure that each power supply would work for the anticipated use. Altech Corp. reserves the right to make modification to its power supply data sheets or specifications at any time without prior notice. Please visit www.altechcorp.com/power for more information.
94
Selection Guide
U ni ve r Sw sal itc Inp u h U Se t L 50 lec U 8 L t In L 60 iste put d N 950 EC -1 C Cla Rec E . m ss ar 2 C R oh ked om s pl R Co ia ea nt m ch p D C lian C om t O pl Sh K ia nt or t O Cir ve c rlo uit ad O ve r O Vol ve ta ge r EM Tem pe C ra C tu B re
Output voltage
5 PS-S10xx PS-S20xx PS-S40xx PS-S60xx PS-S100xx PS-15xx PS-30xx PS-45xx PS-60xx PS-100xx PS-75xx PS-120xx PSH-120xx PSP-240xx PSP-480xx PSP-480Sxx PST-240xx PST-480xx PST-960xx PST-960Pxx PS-C120xx PS-C240xx PS-C480xx PS-C480Pxx PSW-120xx PSW-240xx PSW-480xx PS-RDN PS-UPS
TP = three phase input WR = wide range input
12 X X X X X X X X X X X X
15 24 48 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X
X X X X X X X X X X X X X X V X TP TP TP TP X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X* X* X*
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X SIG X SIG X X X X X X X X X X X X X X X X X X X X X X X X X X X DBO X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X
X X 21-28 21-28
X X X
X WR X WR X WR
X* = selected items, see data sheet SIG = DC OK signal
V = 220V INPUT ONLY DBO = DC bus OK
95
Index
Part No. Page
32 32 32 40 40 40 24 24 24 24 26 26 26 26 28 28 28 28 30 30 30 30 38 38 38 64 64 64 66 66 68 68 70 70 86 18 18 18 10 10 10 10 12 12 12 12 14 14 14 14
Part No.
Page
PS-10012 .........................................22, PS-10015 .........................................22, PS-10024 .........................................22, PS-12012 .........................................36, PS-12024 .........................................36, PS-12048 .........................................36, PS-1505 ...........................................22, PS-1512 ...........................................22, PS-1515 ...........................................22, PS-1524 ...........................................22, PS-3005 ...........................................22, PS-3012 ...........................................22, PS-3015 ...........................................22, PS-3024 ...........................................22, PS-4505 ...........................................22, PS-4512 ...........................................22, PS-4515 ...........................................22, PS-4524 ...........................................22, PS-6005 ...........................................22, PS-6012 ...........................................22, PS-6015 ...........................................22, PS-6024 ...........................................22, PS-7512 ...........................................36, PS-7524 ...........................................36, PS-7548 ...........................................36, PS-C12012 ......................................62, PS-C12024 ......................................62, PS-C12048 ......................................62, PS-C24024 ......................................62, PS-C24048 ......................................62, PS-C48024 ......................................62, PS-C48048 ......................................62, PS-C480P24 ....................................62, PS-C480P48 ....................................62, PS-RDN20 .......................................84, PS-S10012.........................................8, PS-S10024.........................................8, PS-S10048.........................................8, PS-S1005...........................................8, PS-S1012...........................................8, PS-S1015...........................................8, PS-S1024...........................................8, PS-S2005...........................................8, PS-S2012...........................................8, PS-S2015...........................................8, PS-S2024...........................................8, PS-S4005...........................................8, PS-S4012...........................................8, PS-S4024...........................................8, PS-S4048...........................................8,
PS-S6005...........................................8, 16 PS-S6012...........................................8, 16 PS-S6024...........................................8, 16 PS-S6048...........................................8, 16 PS-UPS40........................................84, 88 PSH-12024 ......................................36, 42 PSH-12048 ......................................36, 42 PSP-24024.......................................36, 44 PSP-24048.......................................36, 44 PSP-48024.......................................46, 48 PSP-48048.......................................46, 48 PSP-480S24 ....................................46, 50 PSP-480S48 ....................................46, 50 PST-24024 .......................................52, 54 PST-24048 .......................................52, 54 PST-48024 .......................................52, 56 PST-48048 .......................................52, 56 PST-96024 .......................................52, 58 PST-96048 .......................................52, 58 PST-960P24 .....................................52, 58 PST-960P48 .....................................52, 58 PSW-12012......................................74, 76 PSW-12024......................................74, 76 PSW-12048......................................74, 76 PSW-24024......................................74, 78 PSW-24048......................................74, 78 PSW-48024......................................74, 80 PSW-48048......................................74, 80 Accessories: 15.960 ....................................................91 2511110 .................................................90 2511110/1M...........................................90 2511120 .................................................90 2511120/1M...........................................90 CA202 ....................................................91 CA302 ....................................................91 CA402 ....................................................91 CA603 ....................................................90 CA701-15...............................................90 CA701-15-2M ........................................90 CA701-15/S ...........................................90 CA701-15/S-2M.....................................90 CA703 ....................................................90 CA802 ....................................................91 CA803 ....................................................90 CA903 ....................................................90 CASP .....................................................91 CGT10U .................................................91 CGT4N ...................................................91 CGT6N ...................................................91
96
97

AltechCorp - Power Supplies

Uploaded by

Copyright:

Available Formats

AltechCorp - Power Supplies

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AltechCorp - Power Supplies

Uploaded by

Copyright:

Available Formats

ALTECH DIN-Rail Power Supplies

Frequently Asked Questions Selection Guide Index Terms and Conditions

Altech Corp. 35 Royal Road Flemington, NJ 08822 Phone (908)806-9400

DIN Rail Power Supplies

Rugged Metal Case

Easy to understand layout panel

Altech Power Supplies ... ...Easy to Use & Reliable!

EMC & Safety

Slim line Single Phase Power Supply

35mm DIN Rail Mounting

Adjustable DC output voltage

10W Single Output Industrial DIN Rail Power Supply

20W Single Output Industrial DIN Rail Power Supply

40W Single Output Industrial DIN Rail Power Supply

60W Single Output Industrial DIN Rail Power Supply

100W Single Output Industrial DIN Rail Power Supply

For more information please visit www.altechcorp.com

SPECIFICATIONS PS-S10 Series

Terminal Pin. No Assign. (TB2)

Assignment FG AC/N AC/L

Terminal Pin. No Assign. (TB1)

Terminal Pin. No Assign. (TB2)

Assignment FG AC/N AC/L

Terminal Pin. No Assign. (TB1)

Terminal Pin. No Assign. (TB2)

Terminal Pin. No Assign. (TB1)

Terminal Pin. No Assign. (TB2)

Terminal Pin. No Assign. (TB2)

CME & YTEFAS

Protection type: Shut down overvoltage, re-power on to recover

SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION

HARMONIC CURRENT EMS IMMUNITY

MTBF DIMENSION PACKING

Terminal Pin. No Assign. (TB1)

Pin No. Assignment DC OUTPUT +V 4 DC OUTPUT -V 5 DC OK SIGNAL 6

Terminal Pin. No Assign. (TB2)

DETECTION CIRCUIT O.L.P. CONTROL O.V.P.

Model 5V 12V 15V 24V

R 200 1.5K 2K 3.9K V-

Model 5V 12V 15V 24V

Model 5V 12V 15V 24V

RL 120 700 700 1.2K

Output Derating VS Input Voltage

Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.

Tolerance: includes set up tolerance, line regulation and load regulation.

Protection type: Shut down overvoltage, re-power on to recover

SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION

HARMONIC CURRENT EMS IMMUNITY

Terminal Pin. No Assign. (TB1)

Terminal Pin. No Assign. (TB2)

DETECTION CIRCUIT O.L.P. CONTROL O.V.P.

Model 5V 12V 15V 24V

R 200 1.5K 2K 3.9K V-

Model 5V 12V 15V 24V

Model 5V 12V 15V 24V

RL 120 700 700 1.2K

Output Derating VS Input Voltage

Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.