Agnthos 5 Web PDF

2
The making of a Forceps

1. The raw material is delivered coarsely shaped, and can be manufactured into several different forceps.
2. The two sides of the forceps are carefully welded together under high pressure and heat.
3. Each forceps are grinded according to drawings and tips etc are measured with electronic callipers.
4. During the manufacturing process the instruments are cleaned several times to avoid decontamination.
5. The forceps are put on a belt for 20 minutes to be hardened at 1000C in vacuum (maintained by the re).
6. The forceps are polished with different rollers.
7. Ready for quality checks.
8. Each instrument is hand etched with article number and logo.
9. The instruments are put on stock, waiting to be delivered.
These pictures were taken at the Allgaier Instrumente GmbH

site, our preferred supplier of Surgical Instruments. Allgaier
meets the ISO 9001/13485 and EC Certicates standards and
all our surgical instruments are made in the EU.
AgnTho's AB
Pyrolavgen 3
181 60 Liding, Sweden
Tel: +46 (0)8 766 57 15
Fax: +46 (0)8 766 27 15
E-mail: agnthos@agnthos.se
www.agnthos.se
All our surgical instruments are handmade, why measurements and appearance in
this catalogue may differ slightly. This catalogue is to the best of our knowledge
accurate and correct; however AgnTho's denies all liability and risk due to misprints
and/or inaccuracy. All articles in this catalogue are subject to change without notice.
AgnTho's AB 2011
Scissors
Forceps
Retractors
Cutting & Manipulators
Wound Closure
Laboratory Accessories
..........................................................
.......................................................
29
.................................................
51
...................
61
.....................................
79
...................
93
Dumont
Instrument Care
All new Dumont

ceramic forceps
Please have a look at our new

Instrument Care products
page
32
page
Feeding Needles
Animal ID
Our popular selection of

different materials and
styles of feeding needles
Our full range of

Animal ID Systems
page
94
page
Temperature Control
Anaesthesia Line
New added section with temperature

control systems
Our well known full range

of Anaesthesia products
page
110
page
50
98
116
Surgical Scissors
Iris Scissors
..................................................
..............................................................
Spring Scissors
..................................................
11
Special Scissors .................................................. 16

Super Cut
.......................................................
16
Tungsten Carbide ..................................... 19

Ceramic
............................................................
23
Other Scissors .................................................... 26
SCISSORS Surgical Scissors
STANDARD
STRAIGHT
cm:
Blunt / Blunt
Sharp / Blunt
Sharp / Sharp
10,5
03-020-105
03-022-105
03-024-105
11,5
03-020-115
03-022-115
03-024-115
13.0
03-020-130
03-022-130
03-024-130
14,5
03-020-145
03-022-145
03-024-145
15,5
03-020-155
03-022-155
03-024-155
16,5
03-020-165
03-022-165
03-024-165
17,5
03-020-175
03-022-175
03-024-175
18,5
03-020-185
03-022-185
03-024-185
20,0
03-020-200
03-022-200
03-024-200
cm:
Blunt / Blunt
Sharp / Blunt
Sharp / Sharp
10,5
03-025-105
03-027-105
03-029-105
11,5
03-025-115
03-027-115
03-029-115
13,0
03-025-130
03-027-130
03-029-130
14,5
03-025-145
03-027-145
03-029-145
15,5
03-025-155
03-027-155
03-029-155
16,5
03-025-165
03-027-165
03-029-165
17,5
03-025-175
03-027-175
03-029-175
18,5
03-025-185
03-027-185
03-029-185
20,0
03-025-200
03-027-200
03-029-200
STANDARD
CURVED
www.agnthos.se
Surgical Scissors SCISSORS
MAYO
cm:
Straight
Curved
14,5
03-040-145
03-041-145
15
03-040-150
03-041-150
17
03-040-170
03-041-170
23
03-040-230
03-041-230
cm:
Straight
Curved
15
03-044-150
03-045-150
17
03-044-170
03-045-170
19
03-044-190
03-045-190
MAYO -STILLE
www.agnthos.se
SCISSORS Surgical Scissors
MAYO -NOBLE
STRABISMUS
cm:
Straight
Curved
cm:
Straight
Curved
17
308-176-170
308-177-170
11,5
03-336-115
03-337-115
METZENBAUM
DELICATE
METZENBAUM
cm:
Straight
Curved
cm:
Straight
Curved
11,5
411-244-110
411-245-110
14,5
03-080-145
03-081-145
14,5
03-070-145
03-071-145
www.agnthos.se
Iris Scissors SCISSORS
INSTRUMENT
CARE
50
page
BONN
IRIS SCISSORS
cm:
Straight
Curved
411-614-080
411-615-080
cm:
Straight
Curved
03-320-090
03-321-090
10,5
03-320-105
03-321-105
11,5
03-320-115
03-321-115
12
03-320-120
03-321-120
Angled
03-325-115
www.agnthos.se
SCISSORS Iris Scissors
STEVENS
cm:
Straight / Sharp
Curved / Sharp
03-332-090
11,5
03-330-115
03-331-115
cm:
Straight / Blunt
Curved / Blunt
03-335-090
11,5
03-332-115
STEVENS
www.agnthos.se
10
03-333-115
Spring Scissors SCISSORS
mm
Cutting Edge
VANNAS
MINI
CUTTING EDGE =
to
cm:
Straight
Curved
05-118-085
05-119-085
The stated cutting edge may

differ slightly due to the fact that
the instruments are hand made
and some variation may occur.
mm
Cutting Edge
VANNAS
cm:
Straight
Curved
Angular
Angled up
8,5
05-220-085
05-223-085
05-225-085
05-227-085
11
www.agnthos.se
SCISSORS Spring Scissors
mm
Cutting Edge
VANNAS
MODEL TBINGEN
cm:
Straight
Curved
Angular
Angled up
8,5
05-230-085
05-231-085
05-233-085
05-235-085
HIGH QUALITY
SCISSORS
HIGH QUALITY
SCISSORS
mm
mm
Cutting Edge
Cutting Edge
VANNAS MICRO
VANNAS
cm:
Straight
Curved
cm:
Straight
Curved
15000-03
15000-04
15000-00
15000-10
www.agnthos.se
12

HIGH QUALITY
SCISSORS
HIGH QUALITY
SCISSORS
mm
mm
Cutting Edge
Cutting Edge
MORIA
EXTRA FINE
MORIA VANNAS
WOLFF SPRING
cm:
Straight
Curved
cm:
Straight
Curved
MORIA 9600
MORIA 9601
10
MORIA MC52
MORIA MC50
mm
Cutting Edge
VANNAS
cm:
Straight
Curved
12
309-222-120
302-223-120
15
309-222-150
302-223-150
13
www.agnthos.se
SCISSORS Spring Scissors
7,5
Cutting Edge
Cutting Edge
mm
mm
MICRO
DISSECTION
cm:
Straight
Curved
05-036-090
05-037-090
9,5
12,5
Cutting Edge
Cutting Edge
mm
mm
WESTCOTT
www.agnthos.se
cm:
Straight
Curved
11,5
309-102-110
309-103-110
14
13,5
12,5
Cutting Edge
Cutting Edge
mm
mm
NOYES
cm:
Straight
Angular
12
05-142-120
05-143-120
10,5
10
mm
mm
Cutting Edge
Cutting Edge
WESTCOTT
CASTROVIEJO
cm:
Curved / Sharp
Curved / Blunt
cm:
Curved / Sharp
Curved / Blunt
11
05-149-110
05-151-110
10
05-161-100
05-163-100
15
www.agnthos.se
SCISSORS Special Scissors
SUPER CUT
Super Cut
The Super Cut scissors has a special design that delivers precise and accurate cuts, even through the toughest
tissue. The Super Cut technique is made out of two unique blades, one with a micro serrated edge that holds
the tissue and prevents slippage. The other blade has a razor sharp edge that provides the cutting.
All Super Cut scissors are identied with their black handles.
IRIS SCISSORS
www.agnthos.se
cm:
Straight
Curved
307-336-090
307-337-090
11
307-336-110
307-337-110
16
Special Scissors SCISSORS
SUPER CUT
STEVENS
cm:
Straight / Blunt
Curved / Blunt
11
307-358-110
307-359-110
cm:
Straight
Curved
11,5
307-276-110
307-277-110
15
307-276-150
307-277-150
METZENBAUM
17
www.agnthos.se
SUPER CUT
SURGICAL
cm:
Straight
Curved
14
307-106-140
307-107-140
MAYO
www.agnthos.se
cm:
Straight
Curved
14,5
307-156-140
307-157-140
17
307-156-170
307-157-170
18
TUNGSTEN
Tungsten Carbide
When you require a high quality instrument, Tungsten
effective solution for your surgical instruments. The
Carbide adds several advantages to your instrument,
properties of this alloy have also beneted the special
whether there is a need for a hard and durable sharp-
cross patterns that can be found on the needle holders,
ness or you are looking for a long-lasting cost effective
rendering a much more secure needle grip. Tungsten
instrument. This special alloy hold the sharpness of
Carbide inserts are only applied (usually glued or
the instrument several times longer compared to
welded ) to the working surface of the instrument which
conventional instruments.
provide the right exibility to the instruments but with

a superior hardness where the action is.
This feature, compared to the extra initial cost for

a Tungsten Carbide instrument, will provide a cost
IRIS SCISSORS
cm:
Straight
Curved
11,5
04-520-115
04-521-115
19
www.agnthos.se
TUNGSTEN
METZENBAUM
cm:
Straight
Curved
11,5
411-932-110
411-933-110
14,5
04-320-145
04-325-145
SURGICAL
STRAIGHT
www.agnthos.se
cm:
Blunt / Blunt
Sharp / Blunt
Sharp / Sharp
14,5
04-120-145
04-122-145
04-124-145
20
TUNGSTEN
SURGICAL
CURVED
cm:
Blunt / Blunt
Sharp / Blunt
Sharp / Sharp
14,5
04-125-145
04-127-145
04-129-145
MAYO
cm:
Straight
Curved
14
04-220-140
04-225-140
17
04-220-170
04-225-170
21
www.agnthos.se
TUNGSTEN
MAYO -STILLE
cm:
Straight
Curved
15
04-250-150
04-251-150
17
04-250-170
04-251-170
UNIVERSAL
www.agnthos.se
cm:
Wire Scissors
12
04-721-120
22
Special Scissors SC
SCISSORS
SCIS
ISSO
SORS
SO
RS
CERAMIC CUT
Ceramic Cut
The Ceramic Cut scissors are one of the best scissors
resistance to corrosion and chemicals. The special
available, using Super Cut technology combined
matte black ceramic coating avoids any reection
with Tungsten Carbide inserts coated with ceramics.
and provides a low-friction cut which minimizes tissue
Since ceramic is one of the hardest materials on earth
damage. This is one of the best scissors available on
this coating provides an exceptional hard and smooth
the market; use your Ceramic Cut scissors for your
surface. This special treatment gives the scissors a high
most uncompromising work.

Page 16, Page 19
IRIS SCISSORS
cm:
Straight
Curved
11,5
03-320-115K
03-321-115K
23
www.agnthos.se
CERAMIC CUT
STEVENS
cm:
Straight / Blunt
Curved / Blunt
11
307-356-110K
307-357-110K
cm:
Straight
Curved
11,5
411-244-110K
411-245-110K
14,5
03-070-145K
03-071-145K
METZENBAUM
www.agnthos.se
24
CERAMIC CUT
MAYO
cm:
Straight
Curved
14,5
03-040-145K
03-041-145K
17
03-040-170K
03-041-170K
25
www.agnthos.se
SCISSORS Other Scissors
Excellent for cutting tail

tips / PCR sampling
SPENCER
KILLNER
cm:
Straight
cm:
Straight
03-720-090
12,5
03-449-125
13
03-720-130
FOX SAW EDGE
www.agnthos.se
cm:
Straight
Curved
13
03-412-130
03-417-130
26
Other Scissors SCISSORS
BONE SCISSORS
UNIVERSAL
cm:
Straight
cm:
Wire Scissors
19
54-120-190
12
03-741-120
23
54-120-230
BONE SCISSORS
BEEBEE
cm:
Straight / Sharp
Curved / Sharp
10,5
03-744-105
03-745-105
cm:
Straight / Blunt
Curved / Blunt
10,5
03-748-105
03-749-105
27
www.agnthos.se
SCISSORS Other Scissors
Artery scissors with

one ball shaped tip
to avoid damage
BONE SCISSORS
EXTRA STRONG
ARTERY SCISSORS
cm:
Straight
Curved
cm:
Straight
03-880-090
03-881-090
03-508-090
11,5
03-508-115
For cutting ne bones
DISSECTING
SCISSORS
www.agnthos.se
cm:
Fine Angled Blades
Strong Angled Blades
10
03-373-100
03-373-100SB
28
Dumont Forceps
..............................................
30
Dressing Forceps ............................................. 37

Tissue Forceps ................................................... 39
Iris Forceps ........................................................... 41
...............................................
44
...................................................
45
Splinter Forceps
Other Forceps
FORCEPS Dumont Forceps
Dumont
Dumont SA located in Switzerland has been producing the worlds nest microsurgical forceps for more
than 125 years. This is a handcrafting process where each forceps point is made and adjusted by hand,
part by part. There are several different alloys for each forceps model, each one with its own characteristics.
These are the most commonly used within the medical eld.
Dumont Materials
HARD
Ceramic
INOX forceps with a ceramic PVD-thin-lm-coating, giving the instrument superior

hardness, longer lifetime and scratch resistance. Withstands temperature up to 300C,
biocompatible and easy to clean and sterilize.
Carbon
Steel
Is an extremely hard alloy which ensures very strong tips. It easily rusts, is magnetic
and cannot be autoclaved.
INOX
A medical stainless steel that provides good resistance to corrosion, and temperature
up to 400C. This alloy is magnetic and suitable for autoclave sterilisation.
Dumostar
Dumonts nest alloy. This patented Dumont alloy is more elastic and more resistant to
corrosion than the nest stainless steel. It is resistant to minerals, organic acids as well
as to salt. Dumostar is 100% non magnetic and resistant up to 500 C.
Dumoxel
This alloy is patented by Dumont and offers the best resistance to corrosion, mineral
and organic acids due to high concentration of molybdenum and chromium. Dumoxel
is 95% non magnetic, resistant up to 400C and suitable for autoclave sterilisation.
Titanium
Totally resistant to corrosion from nitric acid, chlorides and salt water. Titanium is a
soft material with 40% less weight and more exible than INOX. It is 100% non
magnetic and resistant to temperatures around 430C.
SOFT
Dumont Tips
The Dumont tips in this chapter are measured in A x B in mm, see picture.
Dumont #5 is the most widely sold forceps and is available with different tips.
These are the most commonly used tips, each available in different alloys.
Standard Tip
Biologie Tip
Superne Tip
www.agnthos.se
30
THICKNESS
WIDTH
Dumunt Forceps FORCEPS
Dumont Styles
Dumont forceps comes in different numerical series, whereas the Dumont #5 is by far the most common
style of forceps. Below is a short guide to the different Dumont styles.
Dumont #2
Straight forceps with wide yet ne tips.
Dumont #3
Straight forceps with larger and courser tips.
Dumont #4
Similar to #5 but with slightly larger shanks.
Dumont #5
The most popular Dumont forceps model that comes in different styles:
#55: Similar to #5 but with lighter shanks giving the forceps lighter closing action
#5SPSF: The nest tips produced by Dumont
#5/45: 45 angled tips
#5/90: 90 angled tips
Dumont #7:
Curved forceps with large radius. As the #5 it also comes in different versions and materials.
Our catalogue only shows the most frequently sold Dumont forceps; please contact us if you cannot nd
what you are looking for.
Dumont
#5
Art. No:
Description
Material
Tip A x B, mm:
Length, cm:
0101-5-PO*
Standard Tips
Carbon
0,04 x 0,08
11
0108-5-PS
Standard Tips
INOX
0,06 x 0,10
11
0103-5-PS
Standard Tips
Dumoxel
0,06 x 0,10
11
0209-5-PS
Biologie Tips
Dumostar
0,01 x 0,05
11
0208-5-PS
Biologie Tips
INOX
0,01 x 0,05
11
0203-5-PS
Biologie Tips
Dumoxel
0,01 x 0,05
11
0207-5TI-PS
Biologie Tips
Titanium
0,01 x 0,05
11
0208-5SPSF-PO
Super fine Tips
INOX
0,005 x 0,025
11
0304-5-PO**
Standard Tips
INOX
0,06 x 0,10
11
* Not autoclavable
** Economy quality
31
www.agnthos.se
Dumont Ceramic Coated

These Ceramic Coated forceps provide
several new features to the very popular
Dumont. The Ceramic Coating provides
increased hardness, longer lifetime and
anti-corrosiveness. The black coating
also ensures no reections under the
microscope as well as scratch resistance
with high biocompatibility.
DUMONT 5C
INSTRUMENT
CARE
50
page
DUMONT 5
Art No:
Art No:
0208-5-K
0208-7-K
Description:
Biologie tips
Description:
Biologie tips
Material:
INOX
Material:
INOX
Surface:
BLACK CERAMIC
Surface:
BLACK CERAMIC
Tip A x B, mm:
0,01 x 0,05
Tip A x B, mm:
0,04 x 0,07
Length, cm:
11
Length, cm:
11,5
DUMONT 55
DUMONT 55
Art No:
Art No:
Art No:
3308-5-PS
0208-55-PS
0209-55-PS
Description:
Biologie tips
Description:
Light ne shanks,
biologie tip
Description:
Light ne shanks,
biologie tip
Material:
INOX
Material:
Dumostar
Tip A x B, mm:
0,01 x 0,05
Tip A x B, mm:
0,01 x 0,5
Length, cm:
11
Length, cm:
11
Material:
INOX
Tip A x B, mm:
0,01 x 0,05
Length, cm:
11
www.agnthos.se
DUMONT 7C
32
DUMONT 5A
DUMONT 5/45
DUMONT 5/45
Art No:
Art No:
Art No:
0208-5A-PS
0208-5/45-PS
0203-5/45-PS
Description:
Obligue, biologie tips
Description:
Tip 45, biologie tips
Description:
Tip 45, biologie tips
Material:
INOX
Material:
INOX
Material:
Dumoxel
Tip A x B, mm:
0,02 x 0,06
Tip A x B, mm:
0,01 x 0,05
Tip A x B, mm:
0,01 x 0,05
Length, cm:
11
Length, cm:
11
Length, cm:
11
DUMONT 5/90
DUMONT 3
DUMONT 3C
Art No:
Art No:
Art No:
0208-5/90-PS
0303-3-PS
0303-3C-PS
Description:
Tips 90, biologie tips
Description:
Standard tips
Description:
Standard tips
Material:
INOX
Material:
Dumoxel
Material:
Dumoxel
Tip A x B, mm:
0,01 x 0,05
Tip A x B, mm:
0,10 x 0,17
Tip A x B, mm:
0,10 x 0,17
Length, cm:
11
Length, cm:
12
Length, cm:
11
33
www.agnthos.se
DUMONT 7
Art No:
Art No:
Art No:
0203-7-PS
0508-7B-PS
0303-7-PS
Description:
Curved biologie tips
Description:
Standard tips, with
inside tip serration
Description:
Curved standard tip
Material:
Dumoxel
Material:
Dumoxel
Material:
INOX
Tip A x B, mm:
0,03 x 0,07
Tip A x B, mm:
0,10 x 0,17
Tip A x B, mm:
0,10 x 0,17
Length, cm:
11, 5
Length, cm:
11, 5
Length, cm:
11, 5
DUMONT 7
DUMONT 7S
Art No:
Art No:
0208-7-PS
0208-7S-PS
Description:
Curved, biologie tips
Description:
Small curved, polished,
biologie tips
Material:
INOX
Material:
INOX
Tip A x B, mm:
0,03 x 0,07
Tip A x B, mm:
0,03 x 0,07
Length, cm:
11,5
www.agnthos.se
DUMONT 7
DUMONT 7B
Length, cm:
11,7
34
DUMONT 4
DUMONT 4
Art No:
Art No:
0103-4-PS
0203-4-PS
Description:
Broad shanks,
standard tips
Description:
Biologie tips
Material:
Dumoxel
Material:
Dumoxel
Tip A x B, mm:
0,02 x 0,06
Tip A x B, mm:
0,08 x 0,13
Length, cm:
11
Length, cm:
11
DUMONT SS
DUMONT SS
Art No:
Art No:
0904-SS140-PO
0203-SS135-PS
Description:
Long narrow shanks
Description:
Long narrow shanks
Material:
INOX
Material:
Dumoxel
Tip A x B, mm:
0,12 x 0,20
Tip A x B, mm:
0,06 x 0,10
Length, cm:
13, 5
Length, cm:
13, 5
35
www.agnthos.se
DUMONT 2
DUMONT 15A
Art No:
Art No:
0208-2SP-PO
0301-15A-PO
Description:
Laminectomy forceps
Description:
Foceps cutter, for
cartilage and bones
Material:
INOX
Material:
Carbon
Tip A x B, mm:
0,02 x 0,40
Tip:
Edge 10,5 mm,
jaw opening 2,5 mm
Length, cm:
12
Length, cm:
11, 5
MINI DUMONT 3
www.agnthos.se
MINI DUMONT 4
MINI DUMONT 5
Art No:
Art No:
Art No:
0302-M3S-PS
0302-M4S-PS
0302-M5S-PS
Description:
Mini forceps,
thin tips
Description:
Mini forceps,
thin tips
Description:
Mini forceps,
thin tips
Material:
INOX
Material:
INOX
Material:
INOX
Tip A x B, mm:
0,1 x 0,17
Tip A x B, mm:
0,08 x 0,13
Tip A x B, mm:
0,06 x 0,10
Length, cm:
7
Length, cm:
7
Length, cm:
8,5
36
Dressing Forceps FORCEPS
STANDARD
SLENDER
cm:
Straight
Curved
Straight
10,5
08-020-105
08-023-105
08-030-105
11,5
08-020-115
08-023-115
08-030-115
13
08-020-130
08-023-130
08-030-130
14,5
08-020-145
08-023-145
08-030-145
16
08-020-160
08-023-160
08-030-160
18
08-020-180
08-023-180
08-030-180
20
08-020-200
08-023-200
08-030-200
25
08-020-250
08-023-250
08-030-250
30
08-020-300
08-023-300
08-030-300
Straight
Curved
Straight with Pin
13
08-032-130
08-033-130
08-040-130
14,5
08-032-145
08-033-145
08-040-145
DELICATE
cm:
37
www.agnthos.se
FORCEPS Dressing Forceps
MODEL USA
STILLE
Standard
Slender
cm:
08-050-120
08-056-120
11,5
08-068-115
08-068-130
08-068-150
cm:
12
13
08-050-130
08-056-130
13
14,5
08-050-145
08-056-145
15
Cross-serrated
MICRO -ADSON
ADSON
cm:
Standard
Cross Serrated
Light Weight
Titan
Standard
Light Weight
12
08-060-120
08-060-121
08-060-120LW
11-060-120
08-062-120
08-062-120LW
15
08-060-150
www.agnthos.se
08-062-150
38
Tissue Forceps FORCEPS
TISSUE FORCEPS
STANDARD
cm:
1x2
2x3
3x4
4x5
10,5
08-221-105
08-222-105
11,5
08-221-115
08-222-115
13
08-221-130
14,5
08-221-145
08-222-130
08-223-130
08-224-130
08-222-145
08-223-145
08-224-145
16
18
08-221-160
08-222-160
08-223-160
08-221-180
08-222-180
20
08-221-200
08-222-200
08-223-200
25
08-221-250
08-222-250
08-223-250
30
08-221-300
08-222-300
08-223-300
08-224-160
08-224-180
08-224-250
DELICATE
cm:
Straight 1 x 2
Straight with Pin 1 x 2
Curved with Pin 1 x 2
13
08-231-130
08-241-130
08-247-130
14,5
08-231-145
08-241-145
08-247-145
39
www.agnthos.se
FORCEPS Tissue Forceps

Cross-serrated
TISSUE FORCEPS
MICRO -ADSON
ADSON
cm:
1x2
1x2
1x2
1x2
1x2
1x2
Standard
Standard
Light Weight
Titan
Standard
Light Weight
12
08-261-120
08-263-120
08-261-120LW
11-261-120
08-262-120
08-262-120LW
15
08-261-150
08-262-150
ADSONBROWN
MODEL
USA
ADLERKREUTZ
cm:
Standard
Light Weight
cm:
1x2
cm:
12
08-267-120
08-267-120LW
12
08-251-120
13
15
08-267-150
13
08-251-130
15
08-276-150
08-278-150
14,5
08-251-145
20
08-276-200
08-278-200
www.agnthos.se
40
2x3
4x5
08-278-130
Iris Forceps FORCEPS
GRAEFE
cm:
tip, mm:
Straight
Curved
Strong Curved
0,5
08-510-005
08-513-005
08-517-005
08-510-010
08-513-010
08-517-010
10
0,3
08-515-003
08-519-003
10
0,5
08-512-005
08-515-005
08-519-005
10
08-420-100
08-421-100
08-423-100
12
08-512-120
08-515-120
08-519-120
13
08-512-130
08-515-130
08-519-130
cm:
tip, mm:
Straight 1 x 2
Curved 1 x 2
Strong Curved 1 x 2
0,5
08-520-005
08-523-005
08-527-005
08-520-010
08-523-010
08-527-010
10
0,5
08-522-005
08-525-005
08-529-005
10
08-425-100
08-427-100
08-429-100
Tissue-Forceps
GRAEFE
41
www.agnthos.se
FORCEPS Iris Forceps
STEVENS
cm:
Straight
Light Curved
Strong Curved
10,5
08-530-105
08-531-105
08-533-105
cm:
Straight 1 x 2
Light Curved 1 x 2
Strong Curved 1 x 2
10,5
08-534-105
08-535-105
08-537-105
Tissue-Forceps
STEVENS
www.agnthos.se
42
Iris Forceps FORCEPS
Tissue-Forceps
BISHOPHARMON
cm:
8,5
1x2
08-564-085
08-566-085
Tissue-Forceps
BISHOPHARMON
cm:
Delicate
Delicate 1 x 2
8,5
08-568-085
08-570-085
43
www.agnthos.se
FORCEPS Splinter Forceps
cm:
Smooth
Smooth
Serrated
Serrated
08-450-080
08-451-080
08-452-080
08-453-080
08-450-090
08-451-090
08-452-090
08-453-090
10,5
08-450-105
08-451-105
08-452-105
08-453-105
11,5
08-450-115
08-451-115
08-452-115
08-453-115
13,0
08-450-130
08-451-130
08-452-130
08-453-130
14,5
08-450-145
08-451-145
08-452-145
08-453-145
Smooth Tips
www.agnthos.se
cm:
Smooth
Smooth
Self-Closing
10
08-438-100
08-439-100
08-440-100
44
Other Forceps FORCEPS
Our Finest Teeth Forceps
Tissue-Forceps
Tissue-Forceps
MODELBONN
FUCHS
cm:
Straight 1 x 2
cm:
Straight 1 x 2
08-554-070
08-575-070
HIGH QUALITY
FORCEPS
MORIA
cm:
Straight
Curved
11
MORIA MC40
MORIA MC40/B
13
45
Straight
Curved
MORIA 9980
MORIA 9987
www.agnthos.se
FORCEPS Other Forceps
JEWELLER'SFORCEPS
cm:
No. 1
11,0
No. 4
No. 5
08-960-004
08-960-005
11,5
12,0
No. 7
08-960-007
08-960-001
CILIA
DOUGLAS
cm:
Smooth
Serrated
cm:
Slender
Wide
08-790-090
08-792-090
08-794-090
08-796-090
www.agnthos.se
46
COVER GLASS
FORCEPS
MERIAM
cm:
Self-Closing
Khne
cm:
Serrated
Smooth
10
08-953-090
08-951-100
16
10-841-160
10-843-160
RUSS. MODEL
PERRY
cm:
Serrated
Smooth
cm:
13
10-853-130
10-855-130
15
08-350-150
20
08-350-200
25
08-350-250
47
www.agnthos.se
FORCEPS Other Forceps
COLLIN-DUVAL
cm:
20
08-360-014
08-360-018
Rodent handling forceps

These long forceps can have a variety of usage, but
are specically designed for handling small rodents.
The long handles ensures a safe working distance
from the animal, one with replaceable rubber tip for
maximum hold and minimizing animal discomfort
and one in INOX for easy sterilization and versatility.
cm:
21
11035-20
WANGENSTEEN
cm:
23
www.agnthos.se
08-150-230
48
08-360-027
Vessel Cannulation Forceps

These ne Vessel Cannulation Forceps are designed specically for insertion
of small catheters into vessels. The hollow jaws ensure a secure insertion
without damaging the ne tube. There are three different forceps depending
on the desired O.D. of the tubing and length of forceps.
VESSEL
CANNULATION
cm:
0,51,0 mm tube O.D.
0,35 mm tube O.D.
11,0
00574-11
00608-11
13,5
00571-13
Vessel Dilator
Small blood vessel

Cannulation System
This special forceps has been highly

modied for vessel dilation. The tips
are designed to minimize damage to
the vessel.
This biocompatible micro cannula system

with trocar is designed for fast and easy
insertion in to small blood vessels. The
tubing has a bulb for securing the tubing
cannula to the vessel by tie-in with a thread.
The cannula has a female luer hub for
attachment to a syringe.
Cannula size 0,33 mm O.D. and 0,16 mm I.D.
VESSEL
DILATOR
VESSEL
CANNULATION
cm:
11
cm:
08-969-007
49
18000-10
www.agnthos.se
FORCEPS Instrument Care
Arkansas Stone
This natural Arkansas Stone has two grooves, 1.6 mm and 0.8 mm and is used
for resharpening the tips of Dumont forceps or other applicable instruments.
Delivered in a cedar box with ten O-rings included.
Art No:
10 x 4 x 1 cm
29008-22
Arkansas Stone
Arkansas Stones
Natural Arkansas oil stones whose neness,
hardness and density are unsurpassed. Used
with mineral oil, they will greatly assist in
resharpening your instruments.
Art No:
O-Rings
90 x 6 mm
29008-01
Square Arkansas Stone
29008-12
Triangular Arkansas Stone
These rubber O-rings t the Dumont

forceps, or similar, and keep them
closed with variable degrees of
pressure on the tips. The O-ring will
Art No:
11200-00
clamp the forceps so that both shanks

O-Rings, 1 cm
are equally sharpened when using the

different Arkansas stones.
Pkg of 10
Tip Protectors
These tip protectors comes in seven
sizes and colours. Protect your
instruments and extend their lifetime
with these latex-free stretchable tip
protectors.
Oil
A multipurpose inert oil for lubrication of a variety
of applications but especially suitable for overlapping
joints on instruments.
Art No:
29055-00
Oil, 50 ml
Art No:
Instrument Tape
29060-00
Organize your instruments easily with these

affordable coloured tapes. They withstand boiling,
cold sterilization and autoclaving. Comes in 8
colours each 0,6 cm wide and 107cm long.
Art No:
29080-00
www.agnthos.se
Instrument Tape
50
Pkg of 35
Tip Protectors
Hemostatic Forceps
....................................
52
Retractors ........................................................... 55
Clamps & Clips ................................................ 58
RETRACTORS & HOLDING INSTR. Hemostatic Forceps
HARTMANN
cm:
Straight
Curved
10
13-020-100
13-021-100
With Teeth
1x2
MICRO MOSQUITO
www.agnthos.se
cm:
Straight
Curved
Straight
Curved
10
13-028-100
13-029-100
13-030-100
13-031-100
12
13-028-120
13-029-120
13-030-120
13-031-120
52
Hemostatic Forceps RETRACTORS & HOLDING INSTR.
KELLY
cm:
Straight
Curved
14
13-078-140
13-079-140
16
13-082-160
13-083-160
PROVIDENCE
HOSPITAL
cm:
Straight
Curved
14
13-072-140
13-073-140
CRILE
53
cm:
Straight
Curved
14
13-090-140
13-091-140
www.agnthos.se
RETRACTORS & HOLDING INSTR. Hemostatic Forceps
ROCHESTER
PAN
cm:
Straight
Curved
13
13-200-130
13-201-130
14
13-200-140
13-201-140
16
13-200-160
13-201-160
18
13-200-180
13-201-180
20
13-200-200
13-201-200
22
13-200-220
13-201-220
24
13-200-240
13-201-240
26
13-200-260
13-201-260
30
13-200-300
13-201-300
BABY-MIXER
www.agnthos.se
BACKHAUS
cm:
Curved
cm:
14
312-471-140
17-251-080
11
17-251-110
13
17-251-130
54
Retractors RETRACTORS & HOLDING INSTR.
ALM
JANSEN
cm:
Sharp
Blunt
cm:
Sharp
Blunt
25-020-070
25-024-070
10
25-040-100
25-042-100
10
25-020-100
25-024-100
WEITLANER
cm:
Sharp
Blunt
10,5
25-050-105
25-052-105
13
55
Sharp
Blunt
25-060-130
25-062-130
www.agnthos.se
RETRACTORS & HOLDING INSTR. Retractors
INSTRUMENT
CARE
50
page
BARRAQUER
COLIBRI
cm:
42-020-030
42-020-040
HOLTZHEIMER
cm:
Blunt
10
25-028-100
GOLDSTEIN
MINI
cm:
342-133-020
Godstein Mini
GOLDSTEIN
cm:
Godstein
www.agnthos.se
56
342-133-030
Retractors RETRACTORS & HOLDING INSTR.
PARK
MAUMENE
PARK- GUYTON
GRAEFE
CASTROVIEJO
cm:
Curved
cm:
Curved
cm:
Curved
cm:
Curved
42-038-060
42-056-080
42-058-080
42-087-080
42-038-090
Flexible neck
cm:
2 x Sharp
3 x Sharp
4 x Sharp
16
24-031-002
24-031-003
24-031-004
cm:
2 x Blunt
3 x Blunt
4 x Blunt
16
24-033-002
24-033-003
24-033-004
57
www.agnthos.se
RETRACTORS & HOLDING INSTR. Clamps & Clips
Applying & Removing Forceps
DIFFENBACH
BULLDOG CLAMPS
cm:
Straight
Curved
3,5
13-320-035
13-321-035
5,0
13-320-050
13-321-050
6,0
13-320-060
13-321-060
VESSEL CLIPS
Art. No:
Length of jaw:
Width of jaw:
Locking pressure:
13-410-004
4 mm
0,75 mm
125 g
13-410-006
6 mm
1 mm
100 g
13-410-008
8 mm
2 mm
85 g
13-410-010
10 mm
2 mm
60 g
cm:
14
www.agnthos.se
58
13-414-140
Clamps & Clips RETRACTORS & HOLDING INSTR.
50g
Closing Force
DIETHRICH
cm:
Straight
Straight
Angled
Angled
13-450-008
13-450-012
13-451-008
13-451-012
x=8 mm
x=12 mm
x=8 mm
x=12 mm
BIEMER
Art.No:
Length:
Length of Jaw:
Closing Force:
Opening:
64-562
18 mm
9,0 mm
2025 g
5,0 mm
MORIA
VESSEL CLAMP
Finely serrated, atraumatic
Art.No:
Length:
Length of Jaw:
Closing Force:
Vessel :
Wide:
MORIA 201/A
33 mm
13 mm
15 g
2 mm
1,8 mm
SCHWARTZ
MICRO SERREFINE
Art.No:
Length:
18052-01
26 mm
Description:
Strong pressure, non-serrated.
18052-02
59
26 mm
www.agnthos.se
RETRACTORS & HOLDING INSTR. Clamps & Clips
APPLYING
FORCEPS
cm:
With Lock:
Without Lock:
14
98 071
98 072
ACLAND CLAMPS
Description:
8 mm
Vessel :
0,41,0 mm
11 mm
Vessel :
0,61,5 mm
17 mm
Vessel :
1,02,25 mm
www.agnthos.se
Angled
Straight
Approximator:
Approximator:
Double Clamp:
Vein
98 244
98 396
98 402
98 408
98 414
Artery
98 196
98 397
98 403
98 409
98 415
Vein
98 245
98 398
98 404
98 410
98 416
Artery
98 197
98 399
98 405
98 411
98 417
Vein
98 246
98 400
98 406
98 412
98 418
Artery
98 198
98 401
98 407
98 413
98 419
60
Bone Cutters ....................................................... 62

Scalpels
...................................................................
Micro Knives
.......................................................
66
70
Hooks, Spatulas & Punches ...................... 72

Probes & Pins ...................................................... 76
CUTTING & MANIPULATORS Bone Cutters
FRIEDMAN
cm:
14
31-321-140
1mm
Cup Width
FRIEDMAN
DELICATE
www.agnthos.se
62
cm:
Straight
Curved
14
31-346-140
31-347-140
Bone Cutters CUTTING & MANIPULATORS
CLEVELAND 4
cm:
14
31-329-140
17
31-329-170
LITTAUER
LUER
cm:
cm:
15
31-377-150
63
11,5
17-780-115
13
17-780-130
15
17-780-150
www.agnthos.se
CUTTING & MANIPULATORS Bone Cutters
CLEVELAND 5
cm:
15
17
BHLER
cm:
Straight
Angled
15
31-730-150
31-731-150
www.agnthos.se
64
31-727-150
31-725-170
Bone Cutters CUTTING & MANIPULATORS
RUSKIN-LISTON
cm:
Straight
Angled
18,5
31-820-185
31-821-185
LISTON
cm:
Straight
14
31-720-140
17
Straight
Straight
31-720-170
19
31-720-190
22
31-720-220
65
www.agnthos.se
CUTTING & MANIPULATORS Scalpels
NO. 3
NO. 3 L
NO. 7 K
NO. 7
For Blades Fig. 1015
02-030-030
www.agnthos.se
02-030-031
NO. 4
NO. 4 L
For Blades Fig. 2025
02-030-071
02-030-070
66
02-036-040
02-036-041
Scalpels CUTTING & MANIPULATORS
Fig. 10
Fig. 11
Fig. 12
Fig. 15
02-040-012
02-040-015
For No: 3, 3L, 7K, 7
02-040-010
02-040-011
Pkg of 100
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
02-040-023
02-040-024
02-040-025
For No. 4, 4L
02-040-020
02-040-021
02-040-022
Pkg of 100
67
www.agnthos.se
CUTTING & MANIPULATORS Scalpels
Fig. 10
Fig. 11
Fig. 12
Fig. 15
Disposable scalpels with plastic handles.
02-050-010
02-050-011
02-050-012
02-050-015
Fig. 21
Fig. 22
Fig. 25
Pkg of 10, individually sterilized
Fig. 20
Disposable scalpels with plastic handles.
02-050-020
02-050-021
02-050-022
Pkg of 10, individually sterilized
www.agnthos.se
68
02-050-025
Scalpels CUTTING & MANIPULATORS
TROUTMAN
CHRIS
CASTROVIEJO
cm:
8 mm
10 mm
cm:
5,5 mm
13
42-922-130
42-924-130
42-920-090
BREAKABLE
SINGLE EDGE
Art. No:
Art. No:
42-940-010
1080
Pkg of 10
Pkg of 10
69
www.agnthos.se
CUTTING & MANIPULATORS Micro Knives
ZIEGLER
cm:
3,5 mm*
11
02-329-110
13
5 mm*
6 mm*
7 mm *
02-322-001
02-322-002
02-322-003
* Cutting edge
TOOK
BARKAN
PAUFIQUE
BARRAQUER
JACOBSON
cm:
11
12
02-463-110
02-358-120
02-380-120
13
02-465-130
15,5
24-523-155
mm
15
cm:
Very ne artery scalpel
Cutting Edge
Cutting Angle
13
72-1551
www.agnthos.se
70
Micro Knives CUTTING & MANIPULATORS
SEXTON
cm:
17
02-532-001
02-532-002
cm:
Handle for changeable blades
9,5
10035-00
02-532-003
Carbon Steel
CHANGEABLE BLADES
Cutting Edge:
1,5 mm
2,75 mm
Small Flat Blade
Large Flat Blade
Angled Blade
Curved Blade
10035-15
10035-20
10035-05
10035-10
10 mm
Pkg of 5
71
www.agnthos.se
CUTTING & MANIPULATORS Hooks, Spatulas & Punches
INSTRUMENT
CARE
50
page
FRAZIER
cm:
Sharp
Blunt
13
24-461-130
24-463-130
18
24-461-180
24-463-180
KILNER
GILLIES
cm:
15
www.agnthos.se
cm:
24-421-150
18
72
24-425-001
24-425-002
Hooks, Spatulas & Punches CUTTING & MANIPULATORS
CURETTES
cm:
0,5 mm
1,0 mm
1,5 mm
1,8 mm
13,5
42-370-005
42-370-010
42-370-015
42-370-018
CURETTES
cm:
2,0 mm
2,5 mm
3,5 mm
4,0 mm
4,5 mm
13,5
42-370-020
42-370-025
42-370-035
42-370-040
42-370-045
73
www.agnthos.se
CUTTING & MANIPULATORS Hooks, Spatulas & Punches
Hippocampal Dissecting Tool

Both ends are malleable for adjustment
of shape and angle.
Curved
Iris Spatula
Flat Micro
Spatula
HEIDEMANN
11 cm
13 cm
16 cm
16,5 cm
17,5 cm
17,5 cm
10089-11
10093-13
85-420-000
10099-15
85-430-001
85-111-002
www.agnthos.se
74
Hooks, Spatulas & Punches CUTTING & MANIPULATORS
HOLTH
KEYES PUNCHER
cm:
Capsular Punch
29-125-090
TISSUE PUNCH
Art. No:
I.D. mm:
Art. No:
O.D. mm:
I.D. mm:
Gauge:
39-200-002
18-035-35
0,80
0,35
21
39-200-003
18-035-50
1,00
0,50
19
39-200-004
18-035-80
1,45
0,80
17
39-200-005
18-035-01
1,80
1,00
15
39-200-006
18-035-02
3,00
2,00
11
39-200-007
18-035-03
4,00
3,00
39-200-008
18-035-05
6,00
5,00
0,35
0,5
0,8
75
www.agnthos.se
CUTTING & MANIPULATORS Probes & Pins
Insect Pins
AUSTRIAN
INSECT PINS
Size:
000
00
mm:
0,25
0,30
0,35
0,40
0,45
0,50
0,55
0,60
0,65
0,70
Length cm:
5,5
Art.No 26000-
25
30
35
40
45
50
55
60
65
70
0,03
mm
Tip Diameter
Finest quality black anodized finish, with nylon head.
Pkg of 100
STAINLESS STEEL
INSECT PINS
Size:
000
00
mm:
0,25
0,30
0,35
0,40
0,45
0,50
0,55
0,60
0,65
0,70
Length cm:
5,5
Art.No 26001-
25
30
35
40
45
50
55
60
65
70
0,03
mm
Tip Diameter
With nylon head.
Pkg of 100
Animal Lancet
Goldenrod Animal Lancet let you collect multiple blood samples
from small animals. It is available in different point lengths for
various animal size and required blood volume. Delivered sterile.
GOLDENROD
mm:
Mice 28 weeks
4,0
GR-4MM
5,0
5,5
Mice 26 months
Mice > 6 months,

Rat < 3 months
Rats > 3 months
GR-5MM
GR-5.5MM
7,0
GR-7MM
Pkg of 1000
www.agnthos.se
76
Probes & Pins CUTTING & MANIPULATORS
MINUTIEN PINS
mm:
Black Anodized
Stainless Steel
0,10
0,15
26002-10
26002-15
0,20
26002-20
Length: 10 mm, Pkg of 500
MORIA nickel plated pin

holder with jaw opening
from 0 1,0 mm diameter.
Stainless Steel, anti-magnetic,
acid resistant. Sold separately.
INSERT PINS
PIN HOLDER
cm:
cm:
26007-01
26007-02
26007-03
26007-04
77
26007-05
12
26016-12
www.agnthos.se
CUTTING & MANIPULATORS Probes & Pins
For vaginal smears
TROCAR
www.agnthos.se
cm:
3,5 mm
O.D. / I.D.
cm:
2 mm
9,5
KN-392
3,5 / 3,0 mm
11,5
33-120-115
78
Needle Holders
Suture Clips
................................................
80
.........................................................
88
Silk & Needles
...................................................
90
WOUND CLOSURE Needle Holders
Smooth Tips
DERF
WEBSTER
cm:
Art. No:
cm:
Art. No:
12
19-112-120
13
19-120-130
MAYO -HEGAR
www.agnthos.se
80
cm:
Art. No:
14
19-170-140
16
19-170-160
18
19-170-180
20
19-170-200
Needle Holders WOUND CLOSURE

Needle Holders with scissors
OLSEN-HEGAR
cm:
Art. No:
11,5
19-280-115
14
19-280-140
16
19-280-160
18
CRILE-MURRAY
19-280-180
LICHTENBERG
KALT
cm:
Art. No:
cm:
Art. No:
cm:
Art. No:
15
19-138-150
17
19-326-170
13,5
19-520-135
81
www.agnthos.se
INSTRUMENT
CARE
50
page
LANGENBECK
cm:
Art. No:
16
19-292-160
18
19-292-180
20
19-292-200
MATHIEU
cm:
Art. No:
14
19-300-140
17
19-300-170
20
www.agnthos.se
19-300-200
82
cm:
Art. No:
Description:
19-840-090
Straight without catch
19-841-090
Curved without catch
19-850-090
Straight with catch
19-851-090
Curved with catch
cm:
Art. No:
Description:
14
19-820-140
Straight without catch
14
19-821-140
Curved without catch
14
19-824-140
Straight with catch
14
19-825-140
Curved with catch
MICRO
CASTROVIEJO
CASTROVIEJO
83
www.agnthos.se
TUNGSTEN
Tungsten Carbide
When you require a high quality instrument, Tungsten
effective solution for your surgical instruments. The
Carbide adds several advantages to your instrument,
properties of this alloy have also beneted the special
whether there is a need for a hard and durable sharp-
cross patterns that can be found on the needle holders,
ness or you are looking for a long-lasting cost effective
rendering a much more secure needle grip. Tungsten
instrument. This special alloy hold the sharpness of
Carbide inserts are only applied (usually glued or
the instrument several times longer compared to
welded ) to the working surface of the instrument which
conventional instruments.
provide the right exibility to the instruments but with

a superior hardness where the action is.
This feature, compared to the extra initial cost for

a Tungsten Carbide instrument, will provide a cost
DERF
cm:
12
www.agnthos.se
BABY- CRILE-WOOD
HALSEY
cm:
20-116-125
cm:
13
20-120-130
84
15
20-160-150
cm:
TUNGSTEN
14
20-220-140
16
20-220-160
18
20-220-180
20
20-220-200
MAYO -HEGAR
Needle Holders with scissors
OLSEN-HEGAR
cm:
12
20-380-120
14
20-380-140
16
20-380-160
18
20-380-180
85
www.agnthos.se
WOUND
WOUN
WO
UND
D CL
CLOS
CLOSURE
OSUR
URE
E Needle Holders
TUNGSTEN
LANGENBECK
cm:
14
20-392-140
16
20-392-160
18
20-392-180
20
20-392-200
MATHIEU
cm:
14
20-420-140
17
20-420-170
20
www.agnthos.se
20-420-200
86
TUNGSTEN
MICRO
CASTROVIEJO
KALT
cm:
13,5
LICHTENBERG
cm:
20-620-135
cm:
14
20-690-140
14
20-470-140
17
20-470-170
CASTROVIEJO
cm:
Straight
Curved
14
20-680-140
20-681-140
87
www.agnthos.se
WOUND
WOUN
WO
UND
D CL
CLOS
CLOSURE
OSUR
OS
URE
UR
E Suture Clips
Reex
For fast suturing of mice, rats and other small rodents.
For 7 or 9 mm clips, both Applyer and Remover.
Individual sterile packs of 20 clips.
AUTOCLIP REMOVER
AUTOCLIP APPLYER
AUTOCLIPS
Art. No:
mm:
Art. No:
mm:
Art. No:
205-1000
204-1000
203-1000
202-1000
201-1000
Pkg of 100
EZ CLIPS
EZ Clips
For all of you using the EZ-Clip/Autoclips System please
know that we will continue to sell this system as well.
Art. No:
Description:
59026
Remover
59043
Applier
59027
Autoclips, 9 mm*
* Pkg of 1000
www.agnthos.se
88
Suture Clips WOUND CLOSURE
MICHEL
HEGENBARTH
cm:
12
WACHENFELDT
Self-Closing
WACHENFELDT
Self-Closing
08-910-120
12,5
08-920-125
Applyer and Remover
08-922-125
08-924-125
Michel Clips
MICHEL
cm:
Art. No:
12
17-730-120
12
17-730-120S
mm:
Art. No:
7,5 x 1,75
22-620-007
11 x 2
22-620-011
12 x 3
22-620-012
14 x 3
22-620-014
For 22-620-011, -012, -014

For 22-620-007
Pkg of 1000
89
www.agnthos.se
WOUND CLOSURE Silk & Needles
Braided Black Silk

Braided silk is one of the best silks for handling and
of ETHICON wound closure products such as Catgut,
tying of any suture material. The braiding on the
Vicryl (Polyglactin), Prolene (Polypropylene), Ethibond
twisted core makes tensile strength higher, and the
(Polyester), Ethilon (Polyamide), Steel wire etc. These
smooth surface makes knots secure. Our braided
products are of both absorbable/non-absorbable types,
silk is non-absorbable, sterile and is only for use with
always delivered sterile and can be ordered in a variety
laboratory animals. We can also supply the full range
of lengths, needle types, USP size etc.
BLACK STERILE SILK
Art. No:
Size:
14719
6-0 (0,08 mm )
14739
5-0 (0,12 mm)
14757
4-0 (0,17 mm)
14777
3-0 (0,25 mm)
14797
2-0 (0,32 mm)
14837
0 (0,37 mm)
14857
1 (0,45 mm)
Pkg of 100 meter
www.agnthos.se
90
Silk & Needles WOUND CLOSURE
Needle types:
For skin closure
For soft and fragile tissue
1
1
22-121-010
22-121-020
22-121-030
22-121-040
22-121-050
22-121-060
22-121-070
22-125-010
22-125-020
22-125-040
22-125-050
22-125-060
10
22-121-090
12
13
14
15
16
Pkg of 12
7
8
9
22-125-080
10
Pkg of 12
22-125-070
22-125-090
22-125-110
22-125-111
22-125-112
22-125-113
22-125-114
22-125-115
22-125-116
11
22-121-110
22-121-111
22-121-112
22-121-113
22-121-114
22-121-115
22-121-116
22-125-030
22-121-080
11
12
13
14
15
16
Spring Eye
Spring Eye
22-134-010
22-134-020
22-134-030
22-134-040
22-134-050
22-134-060
00
Pkg of 12
22-165-002
22-165-003
0
1
22-165-010
22-165-020
22-165-030
Pkg of 12
2
3
KALT
Plain Eye
KEITH
Spring Eye
91
www.agnthos.se
WOUND CLOSURE Silk & Needles
0
0
1
1
22-175-003
22-179-003
2
22-175-010
22-175-020
22-175-030
22-175-040
22-175-050
22-179-010
3
22-175-060
22-179-020
Pb
Pkg of 12
22-179-050
22-179-060
22-179-070
22-179-080
22-175-080
22-179-040
22-175-070
22-179-030
7
8
Pd
Pkg of 12
Spring Eye
Spring Eye
Suture Forceps
Suture Instrument
KRONECKER
cm:
Art. No:
13
326-127-130
MODEL
TBINGEN
www.agnthos.se
OCHSNER
cm:
Art. No:
cm:
Art. No:
10
08-720-100
14
08-934-140
92
Feeding Needles .............................................. 94

Animal ID ................................................................ 98
Tubing ................................................................... 100
Cautery ................................................................. 102
Instument Cases ............................................ 103
Surgical Accessories .................................... 105
Restrainers ......................................................... 109
Temperature Control ................................. 110
Drills & Burrs ..................................................... 112
Stereotaxic & Neuro ................................... 114
Anaesthesia ....................................................... 116
Injection & Microdialysis .......................... 118
LABORATORY ACCESSORIES Feeding Needles
Feeding Needles
Our animal Feeding Needles are designed to meet the
The disposable Feeding Needles are delivered in
needs of pharmacologists, toxicologists, pathologists
sterile pouches with plastic luer hub and silicon tips.
and other biomedical researchers. These Feeding
Two kinds are available; Malleable Metal and Teon
Needles are mostly used for dosing and oral feeding
tubing. The malleable metal type can easily be formed
of laboratory animals, but the stainless steel needles
to a desired angle or shape. The Teon type is very
can also be used for Intracardiac Perfusion procedures.
exible and ensures that no damage occurs during
Their unique ball design of the needle tip ensures
the insertion.
insertion with minimal risk of puncturing vital organs.
www.agnthos.se
94
Feeding Needles LABORATORY ACCESSORIES
This Feeding Needle Guide has been produced based on experience and should be used as a
guide only e.g. dosage volume, consistency and viscosity are not addressed.
Art. No:
Newborn
Mice & Rats
15 35 g
50 150 g
>150 g
1036
1037
1038
1043
1044
7900
7901
7920
7902
7904
7905
7906
7907
7923
7909
7924
7913
7914
7915
7916
4202
4204
4206
5200
5202
5204
5206
7204
7206
95
www.agnthos.se
LABORATORY ACCESSORIES Feeding Needles
1044
1036
1038
1043
7900
1037
7902
7907
7909
7913
7915
7901
7904
7923
7924
7914
7916
7920
7905
7906
www.agnthos.se
Art. No:
Gauge:
Length, mm:
Ball O.D. mm:
1044
18
30
1,75
1037
18
40
1,75
1036
21
40
1,75
1038
19
60
1,75
1043
14
80
2,00
7900
24
25
1,25
7901
22
25
1,25
7920
22
37
1,25
7902
20
37
2,25
7904
18
37
2,25
7905
18
50
2,25
7906
18
75
2,25
7907
18
75
3,00
7923
16
50
3,00
7909
14
75
4,00
7924
13
75
4,00
7913
18
50
2,25
7914
18
75
2,25
7915
16
50
3,00
7916
16
75
3,00
96
Feeding Needles LABORATORY ACCESSORIES
4202*
4204*
4206*
5200
5202
5204
5206
7204
7206
* Malleable to desired shape.
Art. No:
Gauge:
Tube Length, mm:
Tube, O.D. / I.D. mm
Ball O.D. mm:
4202
20
38
0,92 / 0,62
1,9
4204
18
52
1,20 / 0,83
2,3
4206
15
78
1,81 / 1,45
2,9
Malleable metal with silicon-tip, sterile with plastic luer hub. Pkg of 5.
Art. No:
Gauge:
Tube Length, mm:
Tube, O.D. / I.D. mm
Ball O.D. mm:
5200
20
38
0,90 / 0,50
1,8
5202
18
38
1,18 / 0,68
2,0
5204
17
52
1,46 / 0,86
2,4
5206
15
78
1,79 / 1,19
2,8
7204
18
75
1,18 / 0,68
2,0
7206
17
85
1,46 / 0,86
2,4
Flexible Teflon tube with silicon-tip, sterile with plastic luer hub. Pkg of 5.
97
www.agnthos.se
LABORATORY ACCESSORIES Animal ID
Animal ID
Animal research requires a reliable system of identication. An ID system for one experiment may not
be suitable for another. How to apply the ID mark, what kind of species and duration of the experiment
are some of the factors that determines which method to choose.
Ear Punch Pincer

We developed this ear punch pincer after having heard several testimonies from customers
with sore wrists and thumbs from using small ID punchers. This pincer relieves the stress on
the wrist during ID marking as it requires a very gentle pressure to cut a hole. The stainless
steel puncher has a sloped edge which provides a cut rather than a punch, which minimizes
animal discomfort. The ear punch pincer is autoclavable but should be lubricated
afterwards for a long and trouble free usage.
Art. No:
Hole
AT7000
2,00 mm
AT7075
2,75 mm
Ear Puncher
Our own development of a small and efcient ear puncher based on the AT7000. This puncher
allows the user to come closer when marking the animal and it is also equipped with a sloped
edge for a clean cut. This ear puncher with spring action is autoclavable, but should be
lubricated afterwards for a long and trouble free usage. 11 cm long with a 2 mm hole.
www.agnthos.se
98
Art. No:
Hole
AT7020
2 mm
Animal ID LABORATORY ACCESSORIES
Ear Tags
These ear tags are produced in Monel which is a Nickel-Copper alloy that is used for its excellent
combination of corrosion resistance, strength & exibility. The tags are lightweight and can be
used in chronic studies. The standard tags are laser etched for best visibility with number 11000.
The ear tags are also available with custom etched numbers or letters. The tag is easily applied
with a special applicator.
Art. No:
Description:
1005S1
Applicator
1005-1
Ear tags, 11000
PICO-ID Implantable Chip

This is the smallest implantable ISO chip for animal
sealed in biocompatible glass with a unique, non-
idencation in the world today! Not only is this the
replicable ID number. The ID chip is passive and is
smallest ISO chip currently available both in length
activated once within the readers electromagnetic
and in diameter, but also the needle used to inject
eld. The implanted chip then transmits its data to the
the chip is much smaller than the previous injector.
reader within milliseconds. An adhesive with 6 labels
The ID chip measures 7x1,25mm and has a Parylene
for each number and with barcodes is delivered with
coating for antimigration. It features a custom
each chip. Each chip is delivered preloaded in a
integrated circuit, coil and capacitor hermetically
<16 Gauge needle sterilized in EO gas.
Art. No:
Description:
Size:
150000360
PetScan Reader
150000500
PICO-ID Chip *
7 x 1,25 mm
150000444
MICRO-ID/8 *
8 x 2,12 mm
150000447
MICRO-ID/12 *
12 x 2,12 mm
140 grams
* Pkg of 10
Only 7 x 1,25 mm!
We will continue to support all of you

still using the AVID system
99
www.agnthos.se
LABORATORY ACCESSORIES Tubing
PE
Polyethylene tubing is suitable for catheters or other general laboratory applications. Supplied non-sterile.
Medical grade. Pkg of 30 meter.
Art. No:
O.D. mm:
I.D. mm:
PE 5
0,35
0,20
PE 8
0,50
0,20
PE 10
0,61
0,28
PE 20
1,05
0,35
PE 31
0,80
0,50
PE 50
0,96
0,58
PE 60
1,20
0,80
PE 90
1,27
0.86
PE 160
1,50
1,00
PE 190
1,70
1,20
PE 200
1,90
1,40
Pkg of 30 meter
Polyurethane
Polyurethane has proven to be more blood compatible than other materials. This means extended catheter life
and reducing the probability of intravascular thrombosis. Polyurethane does not contain any plasticizers and is
delivered non-sterile. Pkg of 12 meter.
Art. No:
O.D. mm:
I.D. mm:
MRE 010
0,25
0,12
MRE 025
0,64
0,30
MRE 033
0,84
0,36
MRE 037
0,94
0,58
MRE 040
1,02
0,64
MRE 040-S-20
1,02
0,50
MRE 050
1,27
1,02
MRE 080
2,03
1,02
Pkg of 12 meter
Silicon
The silicon rubber tubing is inert and contains no harmful plasticizers. The tubing may be autoclaved and
re-sterilized without altering physical characteristics. Supplied non-sterile. Pkg of 8 meter.
Art. No:
O.D. mm:
I.D. mm:
SIL 025
0,64
0,30
SIL 037
0,94
0,64
SIL 047
1,19
0,64
SIL 065
1,65
0,76
SIL 080
2,03
1,02
Pkg of 8 meter
www.agnthos.se
100
Tubing LABORATORY ACCESSORIES
FEP
FEP teon tubing is inert, clear and with small internal diameter. There is a strict correlation between the length
of the tubing and the internal volume. FEP is commonly used to connect microdialysis probes, syringes, liquid
switches, swivels and other components in a microdialysis system. Supplied non sterile.
Art. No:
O.D. mm:
I.D. mm:
Type:
Volume:
Pkg of:
FEP 1004
0,68
0,12
Transparent
1,2 l /10 cm
1m
FEP 1005
0,68
0,12
Transparent
1,2 l /10 cm
10 x 1 m
FEP 1006
0,68
0,15 *
Red
N /A
Free length
*+/- 0,05 mm
PEEK
PEEK is an inert, opaque tube. It is used in the same applications as FEP but with stiffer tubing characteristics.
It is also more resistant to oxygen transfer than FEP. Supplied non sterile. Pkg of 1 meter.
Art. No:
O.D. mm:
I.D. mm:
PEEK 10263
0,65
0,25
Pkg of 1 meter
Tubing Adapters
These anged tubing adapters are made for safe connection between tubing, switch or swivel. The adapters
are capable of adapting tubing and cannulas with an outer diameter of 0,60 0,80 mm. They are made of
polyurethane and should be soaked a few minutes in 70% alcohol prior to use. They will then slide over steel or
plastic tubing and shrink when the alcohol evaporates. This makes a tight and leakproof connection. Pkg of 10.
Art. No:
Type:
1002
Blue
1003
Red
Pkg of 10
101
www.agnthos.se
LABORATORY ACCESSORIES Cautery
Disposable Cautery Pen

Stop bleeding immediately with this handy disposable Cautery Pen. The Platinum tip reaches approximately
1200C. The Pen has a cap that secures the on/off switch to avoid accidental operations while protecting the
tip. This is a disposable instrument that should be discarded when the batteries are dead. Delivered sterile.
Art. No:
59016
Gemini Cautery System

The Gemini Cautery System is the perfect instrument
using the supplied battery spacer. Comes complete
for your cautery needs. This versatile instrument is
with two standard AA batteries, battery spacer, two
delivered with 4 easily replaceable, autoclavable,
tips each 5 and 10 mm, all packed in a hard plastic
nickel-chrome tips, 5 and 10 mm. It has two operating
case with foam for protection.
temperatures, 1200 C or 700 C, which is achieved
Art. No:
70-1700
Replacement Tips
mm:
Art. No:
67-1065
10
67-1066
Pkg of 5
www.agnthos.se
102
Instrument Cases LABORATORY ACCESSORIES
Instrument Tray
A much appreciated cost-effective instrument case.
Protect your delicate and valuable instruments in this
instrument tray. This tray is a lightweight, stackable,
inexpensive tray suitable for autoclaving as well as
storing your instruments. The tray has a separate top
and bottom that locks together, which with the silicone
extrusions ensure a secure yet gentile environment to
your instruments.
Art. No:
Size, cm:
250-3000
21,5 x 11,5 x 4
Picture showing
250-1000
21,5 x 22,0 x 4
250-1000
250-4000
21,5 x 39,0 x 4
Instrument Cup
Designed to reduce damage to surgical instruments.
This instrument cup holder is designed to arrange the
instruments in an open position. This cup replaces the
glass and metal jars, and will render longer instrument
life. Slip resistant bottom makes relocating the cup safe
and easy. Small instruments can be suspended to the
toothed edges, while long instruments will rest against
the soft bottom and side. The wide opening prevents
instruments from touching.
Art. No:
150-1000
103
www.agnthos.se
LABORATORY ACCESSORIES Instrument Cases
Stainless Steel Cases

These stainless steel instrument cases can be used to store instruments
or various equipment and accessories. Inexpensive, reliable and useful
for everyday practice in the laboratory.
Kidney Bowl
Instrument Cases
cm:
Art. No:
cm:
Art. No:
17
20
25
121003
cm:
Art. No:
121001
12 x 8 x 4
121002
16 x10 x 3
157001
23 x13 x 5
157601
157003
31 x 21 x6
157602
20 x10 x 5
157005
30 x 20 x 5
157016
Silicone Mat
The perfect companion while operating.
This silicone mat is designed for safe placement of instruments. It is also used as base
in Stainless Steel Cases (see above), cut into desired size. The mat comes with holes for
draining, is autoclavable and measures 30 x 20 cm.
Art. No:
391-487-001
www.agnthos.se
ww
w
www
ww.ag
ww
ag
gnt
n os
nth
os.
o
s. se
s.
s
104
10
1
0
Surgical Accessories LABORATORY ACCESSORIES
Absorption Spears, SUGI

Triangular shaped synthetic surgical sponges which absorbs uids twice as fast, and three times more, than the
best cotton sponges. They are made out of soft biocompatible proven material that doesnt leave any ber residue.
Delivered sterile with or without handle.
cm:
Art. No:
cm:
Art. No:
42-886-200
42-886-460
Pkg of 200
Pkg of 500
Spongostan
Absorbable hemostatic gelatin sponge.
Sterile 1 x 1 x 1 cm.
Art. No:
3216
Pkg of 24
Bonewax
Sterile wax for bone hemostasis. Bone wax is a sterile mixture
of bees wax, almond oil and salicylic acid and is used to control
bleeding on bone surface in thoracic, orthopedic and oral surgery
as well as neurosurgery. The wax achieves local hemostasis of
bone by acting as a mechanical barrier. Soft, kneadable and
ready to use.
Art. No:
W810
Pkg of 12 x 2,5 g
Dermabond
Dermabond is a liquid topical skin adhesive used for wound closure.
Art. No:
AHVM12
Pkg of 12 x 0,36 ml
105
www.agnthos.se
LABORATORY ACCESSORIES Surgical Accessories
Exacta Rodent Shaver

The Exacta shaver is a very small high quality shaver designed for shaving
animal hair. It is delivered with a 2,4 cm wide blade that can cut as close as
HIGH QUALITY
SHAVER
0,1 mm to the skin. Thanks to the small footprint the Exacta can be located
very close to where the surgery takes place. The shaver can only be used
without power cord, and stands rmly in its charger stand while charging the
battery. An indicator light is illuminated while charging. The blade can be
replaced when needed.
Ergonomic
Very quiet
Rechargeable
Blade only 2,4 cm wide
Weight only 110 grams
Stand-up charger with indicator light
Operates only without cord
Art. No:
GT415
Andis Rodent Shaver

The Andis shaver is a small shaver delivered with a 2,7 cm wide blade. The Andis
also cuts as close as 0,1 mm to the skin. The Andis shaver can only be used
without power cord and an indicator light is illuminated while charging.
The blade can be replaced when needed.
Rechargeable
Blade 2,7 cm wide
Weight 140 grams
Stand-up charger with indicator light
Operates only without cord
Art. No:
3515
Art. No:
AT3020
Surgical Pad
No more cloths and sponges during surgery!
This Surgical pad is made out of Silicon and is easily cleaned and can be sterilized.
It is approximately 6 mm thick and measures 30 x 20 cm. It can easily be cut in to
smaller pieces to t your needs and is excellent when using pins. Colour may vary.
www.agnthos.se
106
Surgical Accessories LABORATORY ACCESSORIES
Cold Light Illumination System

The KL200-LED suits most laboratory requirements for detailed and accurate
illumination, and its very small size makes it ideal for small animal surgery. The
KL200-LED is delivered with a 32 mm clamping ring, seen in the picture, for
attachment to a column. If the KL200-LED is used standalone on a workbench the
unit needs the Stand Base (included but not showed in picture) for a stable and
tilt-proof solution together with the light guides. The LED lights allows for more
than 50.000 operating hours and it is available with one or two exible swan neck
light guide arms, where the 2-guide version is by far the most sold.
1 Light Guide, 50 cm
2 Light Guide, 50 cm
KL200-LED-1
KL200-LED-2
Stereomicroscope
The SM3A is an affordable stereomicroscope very suitable for small animal
surgery. It includes a binocular head, a pair of eyepieces, 10W spot illuminator
and three interchangeable lenses providing magnications of 10, 20 and 35
times. It has a 280 mm articulated arm that is adjustable in height and viewing
angle and also provides a 180 rotation. The SM3A offers a very affordable
stereomicroscope solution with a small footprint.
Art. No:
SM3A
Headband Magnier
This padded Headband Magnier has precision polished optical glass lenses.
It is lightweight, fully adjustable and can be worn with eyeglasses.
Art. No:
Description:
Working Distance:
28030-02
Magn. x 2,5
20 cm
28030-03
Magn. x 2,75
15 cm
Sterilizer
The hot bead sterilizer permits instant sterilization of surgical instruments
directly at the workplace. The working temperature of the glass beads is
250C and it sterilizes in 1015 seconds, and after 30 seconds the sterilized
parts are cool enough for use. The sterilizers exterior stays cool even after
being used a full days work and it meets NIH guidelines. It is available with
two different depths; 8 cm (most common) and 14 cm.
Depth:
Art. No:
Description:
8 cm
31100
Steri 250
14 cm
31170
Steri 350
31120
Glass Beads
107
www.agnthos.se
LABORATORY ACCESSORIES Surgical Accessories
Measuring instruments
Range mm:
Iwanson
010
10-993-010
020
Castroviejo
Boley
Stainless Steel Ruler
42-850-020
0100
10-997-100
0300
302-336-300
Organ Balance
Art. No:
Art. No:
PCB2000-1
EW 150-3M
Readout g:
0,1
Readout g:
0,001
Max weight g:
2000
Animal Balance
Max weight g:
150
Min weight g:
0,2
Min weight g:
0,02
Reproducibility g:
0,1
Reproducibility g:
0,002
Linearity g:
+/- 0,2
Linearity g:
+/- 0,003
Weighing plate mm:

130 x 130
Weighing plate mm:

110
www.agnthos.se
108
Restrainers LABORATORY ACCESSORIES
Restrainers
These two different models of restrainers are specially designed to allow the animal to be introduced, adjusted
and restrained with minimal trauma. The restrainers hold the animal safely in position during experimental
procedures such as tail vein injection, blood sampling or blood pressure monitoring etc. The animal should be
trained and conditioned for repeated studies to avoid unnecessary stress.
LE-Series
A hole at the base of the door allows for the whole tail to be available for tail injections/
sampling, pulse transducer etc. The lateral holes and slots allow for good ventilation and
access to the animal. The available space for the animal can easily be adjusted by sliding the
doors and xating with the upper screws. The mouse model has a black nosecone for a less
stressful environment while the rat size has transparent doors.
Art. No:
Description:
Length, mm:
ID , mm:
LE5014
Up to 25 g
80
23
LE5016
Up to 35 g
90
29
LE5018
Up to 50 g
90
33
LE5019
ob/ob mice
90
44
LE5020
80200 g
150
44
LE5022
180320 g
180
54
LE5024
300 440 g
200
64
LE5025
440550 g
225
74
LE-series
G-Series
The G-Series consists of a cylinder hinged to a base. On the top of the cylinder there are four
slots and an end plate allowing adjustment of the cylinder length for different rodent sizes.
The animal can be accessed through the cylinder slots or the hole in the base plate when
accessing the animal from below.
Art. No:
Description:
Length, mm*:
ID , mm:
G-1
50120 g
160
38
G-2
120250 g
220
57
G-3
250350 g
240
60
G-4
350400 g
260
63
G-5
400 800 g
280
69
* Length = nosecone + cylinder
G-series
109
www.agnthos.se
LABORATORY ACCESSORIES Temperature Control
Self Regulating Hot Plate
Art. No:
Description:
HP 062
Control unit and Hot plate
13048
Desinfection spray, 250 ml
The Self Regulating Hot Plate consists of the Hot Plate,
ambient temperature. The Hot Plate itself consists of
Control Unit and cables, with a very compact and slim
an aluminium plate with a device for maintaining the
design. This high quality Hot Plate has a very uniform
temperature (a heating element and a temperature
temperature distribution on the usable surface,
sensor) and a at casing giving the plate its very low
indicated by the white frame. The Self Regulating Hot
and compact design. The width of the plate allows
Plate is designed to keep the Hot Plate at the preset
the operator to rest the hands on the plate while
temperature, which is easily set by the operator within
operating. The Hot Plate can easily be cleaned or
the range 27 C to 45C. The lowest temperature at
disinfected and measures 27,4 x 21,4 x 1,8 cm.
which the Hot Plate should be used is 2C above the
Homeothermic Blanket
This system provides a fully closed-loop with present
surgery as it ts perfectly into the stereotaxic frame,
body temperature. The desired body temperature can
or a soft blanket. The pad/blankets heat is maintained
be set between 32 45C and is easily set on the front
by the HB101 control unit that works with a DC power
panel of the control unit. The body temperature is then
supply to minimize electrical noise interference to the
controlled by the linear temperature probe connected
surrounding electronic apparatus. The control unit
to the control unit. When the body temperature falls
can be delivered with a RS-232 output & SeDaCom
below the target, the control unit increases the
software, enabling the user to see the temperature
temperature of the pad or blanket. The underlay can
data on a computer at selected time intervals.
be a hard and rigid pad, suitable for stereotaxic
Art. No:
www.agnthos.se
Description:
HB101M402
For mice with pad and YS402 rectal probe
HB1
HB101M451
For mice with pad and YS451 rectal probe
HB1
HB101SM402
For mice with blanket and YS402 rectal probe
HB1
HB101SM451
For mice with blanket and YS451 rectal probe
HB1
HB101H402
For rat with pad and YS402 rectal probe
HB1
HB101S402
For rat with blanket and YS402 rectal probe
YS4
YS402
Rectal probe for rat, tip 3 mm
YS4
YS451
Rectal probe for mouse, tip 1,3 mm
110
Temperature Control LABORATORY ACCESSORIES
Deltaphase Isothermal Pad

This very affordable pad is based on thermodynamic
principles. When heated above 39C, using a microwave,
water bath or heated oven, the previous solid solution
becomes liquid and the pad is ready for use. The pad can
Art. No:
39DP
maintain body temperature for nearly 4 hours. This is a safe

device with no electricity, wires, control unit or electrical
signals that can cause interference. Size 20 x 20 x 2 cm.
BAT-12R /BAT-12
The worlds rst thermocouple thermometer, Model
For recording: Analogue output for strip chart recording is
BAT-4, was designed in 1969. It was soon being used
a standard feature. Two version are available; the BAT-12R
in the lab, factory, hospital O.R. and in the eld. The
with a NiCad battery and charger, for both AC and battery
new BAT-12R has evolved from the BAT-4 with many
operations, and the BAT-12 with a regular 9V battery (not
improvements over the years for tting numerous of
rechargeable) e.g. for eld work. Both are ideal instruments
applications. It has a sealed construction and comes
for use with microprobes.
with a carrying case and 3-point stand.

These sensors are among our most popular but there are
many more to choose from:
Temperature Range
-100 C to +200 C
Rectal probes for fast intermittent measurements with
Resolution
Rectal Probes
smooth ball tip and stainless steel shaft.
0.1
Accuracy
0.1C 1 digit between 0 50C
Flexible Implantable Probes
0.1% 1 digit over full range
Implantable in semi-solids and tissue with needle

(supplied), also for immersion in various solutions and
rectal temperatures of small animals. Totally sheathed in
Art. No:
Description:
chemical resistant Teon and quite rugged. Max Temp.
BAT-12R
Thermometer, AC or battery operated
150C. Isolated. Type # designates needle gauge
BAT-12
Thermometer, 9V battery operated
(or one gauge smaller in thin wall).
RET-2
Rectal probe for rat
RET-3
Rectal probe for mouse
RET-4
Rectal probe for neonatal mouse
IT-14
Flexible implantable probe, 14G
IT-18
IT-23
Many other probes are available as wire-, clinical-,

needle- and general purpose probes for a wide
range of applications.
111
www.agnthos.se
LABORATORY ACCESSORIES Drills & Burrs
High Speed Stereotaxic Drill

This micro motor drill for stereotaxic work has a
Specication
quick release rotary type chuck for opening and

closing. It is an affordable and easy to use compact
Equipment
drill suitable for the biomedical eld.
Soft rubber support for handpiece
Technical Features
This versatile drill can be used with a variety of drill bit

sizes, diamond-, trephine- or stainless steel burrs. It is
Speed: 0 27.000 rpm
a multipurpose drill that can be used for many different
Absorbed power
applications, that works both in reverse and forward
Feed power: 230V Hz 50/60
mode. The weight of the hand piece is only 130 grams.
(110 Volt on request)
Innitely variable speed control up to 27000 rpm and the
Dimensions & Weight
rpm is clearly shown on the front display. The system is
Weight: 4,3 kg
delivered with a rubber stand for the hand piece, and a
19 x 19 x 8 cm
foot pedal for start and stop operations. The unit is by

default delivered with a straight hand piece, but can be
supplied with an angled hand piece if required. A special
holder can be supplied to xate the hand piece to a
stereotaxic manipulator.
Art. No:
323-IN
www.agnthos.se
112
Optional
Angled handpiece with

2,35 mm chuck ( 317M )
Drills & Burrs LABORATORY ACCESSORIES
Cordless Stereotaxic Drill

This micro drill is designed for research applications that require surgical
burrs and trephines. It is a lightweight, cordless, very affordable and
easy to use compact drill suitable for the biomedical eld.
This drill is constructed of lightweight aluminium alloy for balance and
control and is powered by a rechargeable 6-volt nickel cadmium battery.
Under normal operating conditions the unit will function for 8 hours between
recharging. The battery should last for up to 1000 charges/discharges
cycles. The drill is equipped with an easy chuck, allowing the burrs to
be attached by only pushing to install, and pulling to remove. No
additional tools are necessary. It comes in a hard plastic case
with die-cut foam for convenient storage.
Specication
Length (Without Burr ): 17,5 cm
Diameter: 1,9cm
Power: 6-Volts DC
Speed: 12.000 rpm
Art. No:
67-1200
Stainless Steel Burrs
Stainless Steel Trephines
Diamond Burrs
These burrs are manufactured
These Stainless Steel Trephines
These burrs consist of a hardened
from Stainless Steel in one piece.
drills have a special construction
Stainless Steel prole coated with
They are of high quality with
to guarantee a safe and speedy
selected diamond grains, using modern
precision toothing, high elasticity
working process. All Trephines
electro technology. This ensures an
and optimal hardness.
burrs have an opening for clearing
extremely homogenous, safe and long
of the excess material.
lasting diamond coating.
Art. No:
mm:
Art. No:
mm:
Art. No:
mm:
HM71005
0,5
224RF018
1,8
H001009
0,9
1,4
2,1
HM71007
0,7
224RF023
2,3
H001014
HM71009
0,9
227RF050
5,0
H001021
HM71014
1,4
HM71021
2,1
2,3 mm shaft, 44 mm
overall length, Pkg of 2
2,3 mm shaft, 44 mm
2,3 mm shaft, 44 mm
113
www.agnthos.se
LABORATORY ACCESSORIES Stereotaxic & Neuro
David Kopf Instruments

David Kopf Instruments has established its worldwide leading
position in the stereotaxic instrumentation eld by placing major
emphasis upon two of the most important requirements of any
research scientist: A need for the most technically advanced
instruments available for work in this eld; and the demand for
instruments of uncompromised reliability.
AgnThos is proud to be a distributor for Kopf Instruments and
has been so for more than a decade. Our experience and good
relationship with Kopf Instruments assures that your need for
stereotaxic equipment will be fully met.
Model 900 Small Animal Stereotaxic Instrument
originally designed in 1963, is a versatile, easy-to-use
instrument that facilitates proper alignment of small
animals for the stereotaxic placement of electrodes,
micropipettes, cannulas and other devices.
Brain & Heart Matrices

These high grade acrylic and stainless steel matrices are precisely machined to
ensure reproducible even sections of brain or heart tissue from rat or mouse. The
brain matrices allow the researcher to slice either coronal (perpendicular to center
line) or sagittal (parallel to center line) sections through the brain or heart at 1mm
or 0.5mm intervals. All coronal brain matrices have an additional mid-line sagittal
cut to aid in the separation of the left and right hemispheres. The mouse brain
matrices can also be used on neonatal rat brains.
D
A B
Heart Matrice
Brain Matrice
0,5 mm Steel
Art. No:
1,0 mm Steel
Art. No:
1,0 mm Acrylic
Art. No:
69-2165-1
69-2175-1
68-1175-1
Mouse coronal 4075g
69-2265-1
69-2275-1
68-1275-1
Mouse sagittal 4075 g
3,18
11,1
8,73
19,1
12,2
7,40
69-2120-1
69-2130-1
68-1130-1
Rat coronal 175300 g
4,76
15,9
12,7
36,6
23,8
7,61
69-2220-1
69-2230-1
68-1230-1
Rat sagittal 175300 g
4,76
15,9
12,7
36,6
23,8
7,61
69-2150-1
69-2160-1
68-1160-1
Rat coronal 300600 g
4,76
19,8
14,7
36,6
24,7
10,91
69-2250-1
69-2260-1
68-1260-1
Rat sagittal 300600 g
4,76
19,8
14,7
36,6
24,7
10,91
69-4120
65-2100
65-1100
Heart matrice for rat
12,7
19,9
9,70
Heart matrice for mouse
8,30
12,7
4,80
69-4140
68-1150
www.agnthos.se
Size:
Matrice blades, pkg of 25
114
A mm:
B mm:
C mm:
D mm:
E mm:
Cavity
Depth mm:
3,18
11,1
8,73
19,1
12,2
7,40
Stereotaxic & Neuro LABORATORY ACCESSORIES
Dental Cement
Adhere to bone though anchor screws are still
recommended for reinforcement and security.
Never exceeds 30C. Hardens rapidly.
Art. No:
Description:
7507
Mixing cup
7508
Powder 20 g
7509
Liquid 45 ml
Anchor Screws
These Stainless Steel Anchor Screws are used to reinforce the dental cement
when xating a Guide Cannula to the bone. The screws are 2 mm long with a
tread of 1 mm O.D. The predrilled hole should be made with a 0,9 mm burr
(Art. No: HM71009). The tip of the screw is at to minimize any damage.
Syringes
Art. No:
Description:
MCS1X2
Anchor Screws
Pkg of 100
Our Syringes are made by ILS in Germany in the very heart-land where technical
glass products have been made for centuries. We can offer hundreds of precision
syringes in different sizes and models to t your application; from permanent to
removable needles, Luer-Lock, Gastight etc. Below is a selection of the most
commonly sold syringes.
Microsyringe
Microdialysis Syringe
Luer Lock Syringe
Ultraprecise microsyringes with
A special high precision gastight
High quality Syringe with Luer Lock
removable interchangeable
syringe, tted with a special blunt
with PTFE (Teon) leak-tight seal
needles, commonly used for
needle which is suitable for e.g.
plunger which can be replaced.
CNS microinjections. Other tip
tubing adapters. The needle is
models and O.D. available.
interchangeable. The plungers are

tted with PTFE seal (Teon) leak-tight
seal which can be replaced.
Art. No:
O.D. 0,47 mm
Art. No:
O.D. 0,72 mm
Art. No:
2110301
5 l
2610007
1,0 ml
2607011
1,0 ml
2110401
10 l
2610027
2,5 ml
2607031
2,5 ml
5,0 ml
2607051
5,0 ml
2607071
10,0 ml
2110501
25 l
2110601
50 l
2110701
100 l
2610047
Blunt Needle: 20 mm
Blunt Needle: 20 mm
115
www.agnthos.se
LABORATORY ACCESSORIES Anaesthesia
Anaesthesia Line
More and more regulatory authorities are recommending gas anaesthesia as the preferred
method of anaesthesia instead of injected anaesthetics. It is easier to control the depth of
the sedation, less risk of overdosing, less irritation to tissue and less likely to cause organ
injury as well as a faster recovery.
In many cases Isourane (or more recently Sevourane)
We have everything you need for your gas anaesthesia
is considered the most suitable anaesthetic for mice
setup. Not only are these units specically designed
and rats. It has also been shown that hepatic biode-
for anaesthesia of small rodents, they are small and
gradation of Isourane is less than 0,2 % (Holaday
compact with a minimal footprint. Everything has been
and Smith, 1981) of the administered dose (compare
scaled down; units, tubing and accessories. Since the
Halothane 20 %, Methoxyurane 50 %). The low rate of
units exclusively have been designed for this purpose
biodegradation of inhalant anaesthetics decreases the
they consume very small amounts of anaesthetics,
potential for renal and hepatic injury in anaesthetized
due to a very low ow rate.
animals as well as in exposed personnel.
U-2010 Scavenger
The latest addition to the Anaesthesia Line is the
Scavenger. With this unit your surgery can be carried
out in an unventilated environment. The exhaust
gas is rerouted, via the Gas Routing Switch, to the
Scavenger for ltration through the charcoal lter. The
Scavenger is equipped with different sensors to assure
a safe working environment, and there is no need
for weighing the cartridge since the unit has three
different alarms to alert the user when approaching
U-2010
lter saturation.
U-400 Anaesthesia Unit

This is our greatly appreciated and well proven unit
for gas anaesthesia of rodents, both for induction
chamber, mask and ventilator. With several hundreds
sold, we know this unit will greatly assist in your
research. The airow can be set between 50999
ml/min, which greatly reduces the anaesthetic
consumption compared to other units on the market.
The anaesthetic is located in a 10 mL gas-tight syringe
which will last several hours.
U-400
www.agnthos.se
116
Anaesthesia LABORATORY ACCESSORIES
U-1200/1250 Anaesthesia Unit
Accessories
These units incorporate everything from the U-400
We have all necessary accessories as Induction
with some additional features to accommodate
Chambers, Gas Routing Switches, Air Pumps,
customer requests. Both units are equipped with
Anaesthesia Masks, Reduction Valves, Tubings etc.
improved sensors, built-in air pump and the ability to

controllably add an external gas to the air/anaesthetic
mixture (usually oxygen). This has been an increasing
demand to facilitate longer experiments while retaining the animals wellbeing. The U-1250 also has a
dehumidier when working in humid environments.
U-1250
117
Art. No:
Description:
8323001
8323002
U-400 Anaesthesia Unit, prepared for airpump
8338001
U-2010 Scavenger
8336000
8336050
U-1250 Anaesthesia Unit with dehumidier
8329001
Induction chamber for mouse, 0,8 litres
8329002
Induction chamber for rat, 1,4 litres
8433005
Gas routing switch
8433020
Gas Routing Switch Scavenger
Sera-110
Sera Air Pump 110, 3W
9001001
Anaesthesia mask for mouse
9005050
Anaesthesia mask for rat
906
Stereotaxic anaesthesia mask for rat
907
Stereotaxic anaesthesia mask for mouse
2436050
Reduction Valve
www.agnthos.se
LABORATORY ACCESSORIES Injection & Microdialysis
Injection System
The CX Injection System consists of a 31G Injection Cannula,
a Guide Cannula with 0,5 mm O.D. and a Dummy Cannula
to seal the Guide Cannula when not in use. This system
can be used for CNS injections in both anesthetized and
awake animals.
Microdialysis
The development of the microdialysis technique was
Microdialysis is an in vivo bioanalytical
originally carried out at the Dept. of Pharmacology at the
technique for near real-time monitoring
Karolinska Institute in Stockholm, Sweden. Agneta, the
of chemical events taking place in the
founder of AgnThos, worked at the Karolinska Institute
extracellular uid.
with the development of what came to be microdialysis.

When the technique later on was transferred into the
commercial company Carnegie Medicine, now CMA /
Microdialysis, Agneta continued to work with the development
and marketing of microdialysis at the new founded company.
This has given AgnThos comprehensive knowledge in the
technique and different applications.
The Technique
In short, the microdialysis probe works as an articial blood
vessel. The probe has an inlet and outlet tube running
through a semi-permeable membrane at the tip, where the
perfusion solution passes through. Diffusion then takes
place at the tip, located in the extracellular uid, and the
outlet side of the probe then carries the neurotransmitters
or other substances back for analysis.
The Products
We have a complete range of microdialysis probes with
different shaft lengths; for CNS and peripheral tissue; PES
(Polyether Sulphone) or CU (Cuprophane) membranes;
Standard probes as well as custom made with membrane
cut off from 6 000 35 000 Dalton. We also have the
appropriate guide cannulas, disposable or reusable, to
t the probes. All other necessary accessories as Syringe
Pumps, Syringes, Refrigerated Microsamplers, Liquid Switch,
In Vitro Stand, Plastic Vials and Caps, Balance arms, Swivels
and Tubing are also available.
www.agnthos.se
118
Index
00571-13 ............ 49
00574-11 ............ 49
00608-11 ............ 49
0101-5-PO .......... 31
0103-4-PS ........... 35
0103-5-PS ........... 31
0108-5-PS ........... 31
02-030-031 ......... 66
02-030-030 ......... 66
02-030-070 ......... 66
02-030-071 ......... 66
0203-4-PS ........... 35
0203-5/45-PS ...... 33
0203-5-PS ........... 31
02-036-040 ......... 66
02-036-041 ......... 66
0203-7-PS ........... 34
0203-SS135-PS .... 35
02-040-010 ......... 67
02-040-011 ......... 67
02-040-012 ......... 67
02-040-015 ......... 67
02-040-020 ......... 67
02-040-021 ......... 67
02-040-022 ......... 67
02-040-023 ......... 67
02-040-024 ......... 67
02-040-025 ......... 67
02-050-010 ......... 68
02-050-011 ......... 68
02-050-012 ......... 68
02-050-015 ......... 68
02-050-020 ......... 68
02-050-021 ......... 68
02-050-022 ......... 68
02-050-025 ......... 68
0207-5TI-PS ........ 31
0208-2SP-PO ...... 36
0208-5/45-PS ...... 33
0208-5/90-PS ...... 33
0208-55-PS ......... 32
0208-5A-PS ......... 33
0208-5-K ............. 32
0208-5-PS ........... 31
0208-5SPSF-PO... 31
0208-7-K ............. 32
0208-7-PS ........... 34
0208-7S-PS ......... 34
0209-55-PS ......... 32
0209-5-PS ........... 31
02-322-001 ......... 70
02-322-002 ......... 70
02-322-003 ......... 70
02-358-120 ......... 70
02-380-120 ......... 70
02-463-110 ......... 70
02-465-130 ......... 70
02-532-001 ......... 71
02-532-002 ......... 71
02-532-003 ......... 71
0301-15A-PO ...... 36
03-020-105 ........... 6
03-020-115 ........... 6
03-020-130 ........... 6
03-020-145 ........... 6
03-020-155 ........... 6
03-020-165 ........... 6
03-020-175 ........... 6
03-020-185 ........... 6
03-020-200 ........... 6
03-022-105 ........... 6
03-022-115 ........... 6
03-022-130 ........... 6
03-022-145 ........... 6
03-022-155 ........... 6
03-022-165 ........... 6
03-022-175 ........... 6
03-022-185 ........... 6
03-022-200 ........... 6
03-024-105 ........... 6
03-024-115 ........... 6
03-024-130 ........... 6
03-024-145 ........... 6
03-024-155 ........... 6
03-024-165 ........... 6
03-024-175 ........... 6
03-024-185 ........... 6
03-024-200 ........... 6
03-025-105 ........... 6
03-025-115 ........... 6
03-025-130 ........... 6
03-025-145 ........... 6
03-025-155 ........... 6
03-025-165 ........... 6
03-025-175 ........... 6
03-025-185 ........... 6
03-025-200 ........... 6
03-027-105 ........... 6
03-027-115 ........... 6
03-027-130 ........... 6
03-027-145 ........... 6
03-027-155 ........... 6
03-027-165 ........... 6
03-027-175 ........... 6
03-027-185 ........... 6
03-027-200 ........... 6
03-029-105 ........... 6
03-029-115 ........... 6
03-029-130 ........... 6
03-029-145 ........... 6
03-029-155 ........... 6
03-029-165 ........... 6
03-029-175 ........... 6
03-029-185 ........... 6
03-029-200 ........... 6
0302-M3S-PS ...... 36
0302-M4S-PS ...... 36
0302-M5S-PS ...... 36
0303-3C-PS ......... 33
0303-3-PS ........... 33
0303-7-PS ........... 34
03-040-145 ........... 7
03-040-145K ....... 25
03-040-150 ........... 7
03-040-170 ........... 7
03-040-170K ....... 25
03-040-230 ........... 7
03-041-145 ........... 7
03-041-145K ....... 25
03-041-150 ........... 7
03-041-170 ........... 7
03-041-170K ....... 25
03-041-230 ........... 7
03-044-150 ........... 7
03-044-170 ........... 7
03-044-190 ........... 7
03-045-150 ........... 7
03-045-170 ........... 7
03-045-190 ........... 7
0304-5-PO .......... 31
03-070-145 ........... 8
03-070-145K ....... 24
03-071-145 ........... 8
03-071-145K ....... 24
03-080-145 ........... 8
03-081-145 ........... 8
03-320-090 ........... 9
03-320-105 ........... 9
03-320-115 ........... 9
03-320-115K ....... 23
03-320-120 ........... 9
03-321-090 ........... 9
03-321-105 ........... 9
03-321-115 ........... 9
03-321-115K ....... 23
03-321-120 ........... 9
03-325-115 ........... 9
03-330-115 ......... 10
03-331-115 ......... 10
03-332-090 ......... 10
03-332-115 ......... 10
03-333-115 ......... 10
03-335-090 ......... 10
03-336-115 ........... 8
03-337-115 ........... 8
03-373-100 ......... 28
03-373-100SB ..... 28
03-412-130 ......... 26
119
03-417-130 ......... 26
03-449-125 ......... 26
03-508-090 ......... 28
03-508-115 ......... 28
03-720-090 ......... 26
03-720-130 ......... 26
03-741-120 ......... 27
03-744-105 ......... 27
03-745-105 ......... 27
03-748-105 ......... 27
03-749-105 ......... 27
03-880-090 ......... 28
03-881-090 ......... 28
04-120-145 ......... 20
04-122-145 ......... 20
04-124-145 ......... 20
04-125-145 ......... 21
04-127-145 ......... 21
04-129-145 ......... 21
04-220-140 ......... 21
04-220-170 ......... 21
04-225-140 ......... 21
04-225-170 ......... 21
04-250-150 ......... 22
04-250-170 ......... 22
04-251-150 ......... 22
04-251-170 ......... 22
04-320-145 ......... 20
04-325-145 ......... 20
04-520-115 ......... 19
04-521-115 ......... 19
04-721-120 ......... 22
05-036-090 ......... 14
05-037-090 ......... 14
0508-7B-PS ......... 34
05-118-085 ......... 11
05-119-085 ......... 11
05-142-120 ......... 15
05-143-120 ......... 15
05-149-110 ......... 15
05-151-110 ......... 15
05-161-100 ......... 15
05-163-100 ......... 15
05-220-085 ......... 11
05-223-085 ......... 11
05-225-085 ......... 11
05-227-085 ......... 11
05-230-085 ......... 12
05-231-085 ......... 12
05-233-085 ......... 12
05-235-085 ......... 12
08-020-105 ......... 37
08-020-115 ......... 37
08-020-130 ......... 37
08-020-145 ......... 37
08-020-160 ......... 37
08-020-180 ......... 37
08-020-200 ......... 37
08-020-250 ......... 37
08-020-300 ......... 37
08-023-105 ......... 37
08-023-115 ......... 37
08-023-130 ......... 37
08-023-145 ......... 37
08-023-160 ......... 37
08-023-180 ......... 37
08-023-200 ......... 37
08-023-250 ......... 37
08-023-300 ......... 37
08-030-105 ......... 37
08-030-115 ......... 37
08-030-130 ......... 37
08-030-145 ......... 37
08-030-160 ......... 37
08-030-180 ......... 37
08-030-200 ......... 37
08-030-250 ......... 37
08-030-300 ......... 37
08-032-130 ......... 37
08-032-145 ......... 37
08-033-130 ......... 37
08-033-145 ......... 37
08-040-130 ......... 37
08-040-145 ......... 37
08-050-120 ......... 38
08-050-130 ......... 38
08-050-145 ......... 38
08-056-120 ......... 38
08-056-130 ......... 38
08-056-145 ......... 38
08-060-120 ......... 38
08-060-120LW .... 38
08-060-121 ......... 38
08-060-150 ......... 38
08-062-120 ......... 38
08-062-120LW .... 38
08-062-150 ......... 38
08-068-115 ......... 38
08-068-130 ......... 38
08-068-150 ......... 38
08-150-230 ......... 48
08-221-105 ......... 39
08-221-115 ......... 39
08-221-130 ......... 39
08-221-145 ......... 39
08-221-160 ......... 39
08-221-180 ......... 39
08-221-200 ......... 39
08-221-250 ......... 39
08-221-300 ......... 39
08-222-105 ......... 39
08-222-115 ......... 39
08-222-130 ......... 39
08-222-145 ......... 39
08-222-160 ......... 39
08-222-180 ......... 39
08-222-200 ......... 39
08-222-250 ......... 39
08-222-300 ......... 39
08-223-130 ......... 39
08-223-145 ......... 39
08-223-160 ......... 39
08-223-200 ......... 39
08-223-250 ......... 39
08-223-300 ......... 39
08-224-130 ......... 39
08-224-145 ......... 39
08-224-160 ......... 39
08-224-180 ......... 39
08-224-250 ......... 39
08-231-130 ......... 39
08-231-145 ......... 39
08-241-130 ......... 39
08-241-145 ......... 39
08-247-130 ......... 39
08-247-145 ......... 39
08-251-120 ......... 40
08-251-130 ......... 40
08-251-145 ......... 40
08-261-120 ......... 40
08-261-120LW .... 40
08-261-150 ......... 40
08-262-120 ......... 40
08-262-120LW .... 40
08-262-150 ......... 40
08-263-120 ......... 40
08-267-120 ......... 40
08-267-120LW .... 40
08-267-150 ......... 40
08-276-150 ......... 40
08-276-200 ......... 40
08-278-130 ......... 40
08-278-150 ......... 40
08-278-200 ......... 40
08-350-150 ......... 47
08-350-200 ......... 47
08-350-250 ......... 47
08-360-014 ......... 48
08-360-018 ......... 48
08-360-027 ......... 48
08-420-100 ......... 41
08-421-100 ......... 41
08-423-100 ......... 41
08-425-100 ......... 41
08-427-100 ......... 41
08-429-100 ......... 41
08-438-100 ......... 44
08-439-100 ......... 44
08-440-100 ......... 44
08-450-080 ......... 44
08-450-090 ......... 44
08-450-105 ......... 44
08-450-115 ......... 44
08-450-130 ......... 44
08-450-145 ......... 44
08-451-080 ......... 44
08-451-090 ......... 44
08-451-105 ......... 44
08-451-115 ......... 44
08-451-130 ......... 44
08-451-145 ......... 44
08-452-080 ......... 44
08-452-090 ......... 44
08-452-105 ......... 44
08-452-115 ......... 44
08-452-130 ......... 44
08-452-145 ......... 44
08-453-080 ......... 44
08-453-090 ......... 44
08-453-105 ......... 44
08-453-115 ......... 44
08-453-130 ......... 44
08-453-145 ......... 44
08-510-005 ......... 41
08-510-010 ......... 41
08-512-005 ......... 41
08-512-120 ......... 41
08-512-130 ......... 41
08-513-005 ......... 41
08-513-010 ......... 41
08-515-003 ......... 41
08-515-005 ......... 41
08-515-120 ......... 41
08-515-130 ......... 41
08-517-005 ......... 41
08-517-010 ......... 41
08-519-003 ......... 41
08-519-005 ......... 41
08-519-120 ......... 41
08-519-130 ......... 41
08-520-005 ......... 41
08-520-010 ......... 41
08-522-005 ......... 41
08-523-005 ......... 41
08-523-010 ......... 41
08-525-005 ......... 41
08-527-005 ......... 41
08-527-010 ......... 41
08-529-005 ......... 41
08-530-105 ......... 42
08-531-105 ......... 42
08-533-105 ......... 42
08-534-105 ......... 42
08-535-105 ......... 42
08-537-105 ......... 42
08-554-070 ......... 45
08-564-085 ......... 43
08-566-085 ......... 43
08-568-085 ......... 43
08-570-085 ......... 43
08-575-070 ......... 45
08-720-100 ......... 92
08-790-090 ......... 46
08-792-090 ......... 46
08-794-090 ......... 46
08-796-090 ......... 46
08-910-120 ......... 89
08-920-125 ......... 89
08-922-125 ......... 89
08-924-125 ......... 89
08-934-140 ......... 92
08-951-100 ......... 47
08-953-090 ......... 47
08-960-001 ......... 46
08-960-004 ......... 46
08-960-005 ......... 46
08-960-007 ......... 46
08-969-007 ......... 49
0904-SS140-PO ... 35
1002 ................. 101
1003 ................. 101
10035-00 ............ 71
10035-05 ............ 71
10035-10 ............ 71
10035-15 ............ 71
10035-20 ............ 71
1005-1 ................ 99
1005S1 ............... 99
10089-11 ............ 74
10093-13 ............ 74
10099-15 ............ 74
1036 ................... 96
1037 ................... 96
1038 ................... 96
1043 ................... 96
1044 ................... 96
1080 ................... 69
10-841-160 ......... 47
10-843-160 ......... 47
10-853-130 ......... 47
10-855-130 ......... 47
10-993-010 ....... 108
10-997-100 ....... 108
11035-20 ............ 48
11-060-120 ......... 38
11200-00 ............ 50
11-261-120 ......... 40
121001 ............. 104
121002 ............. 104
121003 ............. 104
120
13-020-100 ......... 52
13-021-100 ......... 52
13-028-100 ......... 52
13-028-120 ......... 52
13-029-100 ......... 52
13-029-120 ......... 52
13-030-100 ......... 52
13-030-120 ......... 52
13-031-100 ......... 52
13-031-120 ......... 52
13048 ............... 110
13-072-140 ......... 53
13-073-140 ......... 53
13-078-140 ......... 53
13-079-140 ......... 53
13-082-160 ......... 53
13-083-160 ......... 53
13-090-140 ......... 53
13-091-140 ......... 53
13-200-130 ......... 54
13-200-140 ......... 54
13-200-160 ......... 54
13-200-180 ......... 54
13-200-200 ......... 54
13-200-220 ......... 54
13-200-240 ......... 54
13-200-260 ......... 54
13-200-300 ......... 54
13-201-130 ......... 54
13-201-140 ......... 54
13-201-160 ......... 54
13-201-180 ......... 54
13-201-200 ......... 54
13-201-220 ......... 54
13-201-240 ......... 54
13-201-260 ......... 54
13-201-300 ......... 54
13-320-035 ......... 58
13-320-050 ......... 58
13-320-060 ......... 58
13-321-035 ......... 58
13-321-050 ......... 58
13-321-060 ......... 58
13-410-004 ......... 58
13-410-006 ......... 58
13-410-008 ......... 58
13-410-010 ......... 58
13-414-140 ......... 58
13-450-008 ......... 59
13-450-012 ......... 59
13-451-008 ......... 59
13-451-012 ......... 59
14719 ................. 90
14739 ................. 90
14757 ................. 90
14777 ................. 90
14797 ................. 90
14837 ................. 90
14857 ................. 90
15000-00 ............ 12
15000-03 ............ 12
150000360 .......... 99
15000-04 ............ 12
150000444 .......... 99
150000447 .......... 99
150000500 .......... 99
15000-10 ............ 12
150-1000 .......... 103
157001 ............. 104
157003 ............. 104
157005 ............. 104
157016 ............. 104
157601 ............. 104
157602 ............. 104
17-251-080 ......... 54
17-251-110 ......... 54
17-251-130 ......... 54
17-730-120 ......... 89
17-730-120S ....... 89
17-780-115 ......... 63
17-780-130 ......... 63
17-780-150 ......... 63
18000-10 ............ 49
18-035-01 ........... 75
18-035-02 ........... 75
18-035-03 ........... 75
18-035-05 ........... 75
18-035-35 ........... 75
18-035-50 ........... 75
18-035-80 ........... 75
18052-01 ............ 59
18052-02 ............ 59
19-112-120 ......... 80
19-120-130 ......... 80
19-138-150 ......... 81
19-170-140 ......... 80
19-170-160 ......... 80
19-170-180 ......... 80
19-170-200 ......... 80
19-280-115 ......... 81
19-280-140 ......... 81
19-280-160 ......... 81
19-280-180 ......... 81
19-292-160 ......... 82
19-292-180 ......... 82
19-292-200 ......... 82
19-300-140 ......... 82
19-300-170 ......... 82
19-300-200 ......... 82
19-326-170 ......... 81
19-520-135 ......... 81
19-820-140 ......... 83
19-821-140 ......... 83
19-824-140 ......... 83
19-825-140 ......... 83
19-840-090 ......... 83
19-841-090 ......... 83
19-850-090 ......... 83
19-851-090 ......... 83
201-1000 ............ 88
20-116-125 ......... 84
20-120-130 ......... 84
20-160-150 ......... 84
202-1000 ............ 88
20-220-140 ......... 85
20-220-160 ......... 85
20-220-180 ......... 85
20-220-200 ......... 85
203-1000 ............ 88
20-380-120 ......... 85
20-380-140 ......... 85
20-380-160 ......... 85
20-380-180 ......... 85
20-392-140 ......... 86
20-392-160 ......... 86
20-392-180 ......... 86
20-392-200 ......... 86
204-1000 ............ 88
20-420-140 ......... 86
20-420-170 ......... 86
20-420-200 ......... 86
20-470-140 ......... 87
20-470-170 ......... 87
205-1000 ............ 88
20-620-135 ......... 87
20-680-140 ......... 87
20-681-140 ......... 87
20-690-140 ......... 87
22-121-010 ......... 91
22-121-020 ......... 91
22-121-030 ......... 91
22-121-040 ......... 91
22-121-050 ......... 91
22-121-060 ......... 91
22-121-070 ......... 91
22-121-080 ......... 91
22-121-090 ......... 91
22-121-110 ......... 91
22-121-111 ......... 91
22-121-112 ......... 91
22-121-113 ......... 91
22-121-114 ......... 91
22-121-115 ......... 91
22-121-116 ......... 91
22-125-010 ......... 91
22-125-020 ......... 91
22-125-030 ......... 91
22-125-040 ......... 91
22-125-050 ......... 91
22-125-060 ......... 91
22-125-070 ......... 91
22-125-080 ......... 91
22-125-090 ......... 91
22-125-110 ......... 91
22-125-111 ......... 91
22-125-112 ......... 91
22-125-113 ......... 91
22-125-114 ......... 91
22-125-115 ......... 91
22-125-116 ......... 91
22-134-010 ......... 91
22-134-020 ......... 91
22-134-030 ......... 91
22-134-040 ......... 91
22-134-050 ......... 91
22-134-060 ......... 91
22-165-002 ......... 91
22-165-003 ......... 91
22-165-010 ......... 91
22-165-020 ......... 91
22-165-030 ......... 91
22-175-003 ......... 92
22-175-010 ......... 92
22-175-020 ......... 92
22-175-030 ......... 92
22-175-040 ......... 92
22-175-050 ......... 92
22-175-060 ......... 92
22-175-070 ......... 92
22-175-080 ......... 92
22-179-003 ......... 92
22-179-010 ......... 92
22-179-020 ......... 92
22-179-030 ......... 92
22-179-040 ......... 92
22-179-050 ......... 92
22-179-060 ......... 92
22-179-070 ......... 92
22-179-080 ......... 92
224RF018 ......... 113
224RF023 ......... 113
22-620-007 ......... 89
22-620-011 ......... 89
22-620-012 ......... 89
22-620-014 ......... 89
227RF050 ......... 113
24-031-002 ......... 57
24-031-003 ......... 57
24-031-004 ......... 57
24-033-002 ......... 57
24-033-003 ......... 57
24-033-004 ......... 57
2436050 ........... 117
24-421-150 ......... 72
24-425-001 ......... 72
24-425-002 ......... 72
24-461-130 ......... 72
24-461-180 ......... 72
24-463-130 ......... 72
24-463-180 ......... 72
24-523-155 ......... 70
250-1000 .......... 103
25-020-070 ......... 55
25-020-100 ......... 55
25-024-070 ......... 55
25-024-100 ......... 55
25-028-100 ......... 56
250-3000 .......... 103
250-4000 .......... 103
25-040-100 ......... 55
25-042-100 ......... 55
25-050-105 ......... 55
25-052-105 ......... 55
25-060-130 ......... 55
25-062-130 ......... 55
26000-25 ............ 76
26000-30 ............ 76
26000-35 ............ 76
26000-40 ............ 76
26000-45 ............ 76
26000-50 ............ 76
26000-55 ............ 76
26000-60 ............ 76
26000-65 ............ 76
26000-70 ............ 76
26001-25 ............ 76
26001-30 ............ 76
26001-35 ............ 76
26001-40 ............ 76
26001-45 ............ 76
26001-50 ............ 76
26001-55 ............ 76
26001-60 ............ 76
26001-65 ............ 76
26001-70 ............ 76
26002-10 ............ 77
26002-15 ............ 77
26002-20 ............ 77
26007-01 ............ 77
26007-02 ............ 77
26007-03 ............ 77
26007-04 ............ 77
26007-05 ............ 77
26016-12 ............ 77
2607011 ........... 115
2607031 ........... 115
2607051 ........... 115
2607071 ........... 115
2610007 ........... 115
2610027 ........... 115
121
2610047 ........... 115

28030-02 .......... 107
28030-03 .......... 107
29008-01 ............ 50
29008-12 ............ 50
29008-22 ............ 50
29055-00 ............ 50
29060-00 ............ 50
29080-00 ............ 50
29-125-090 ......... 75
302-223-120 ....... 13
302-223-150 ....... 13
302-336-300 ..... 108
307-106-140 ....... 18
307-107-140 ....... 18
307-156-140 ....... 18
307-156-170 ....... 18
307-157-140 ....... 18
307-157-170 ....... 18
307-276-110 ....... 17
307-276-150 ....... 17
307-277-110 ....... 17
307-277-150 ....... 17
307-336-090 ....... 16
307-336-110 ....... 16
307-337-090 ....... 16
307-337-110 ....... 16
307-356-110K ..... 24
307-357-110K ..... 24
307-358-110 ....... 17
307-359-110 ....... 17
308-176-170 ......... 8
308-177-170 ......... 8
309-102-110 ....... 14
309-103-110 ....... 14
309-222-120 ....... 13
309-222-150 ....... 13
31100 ............... 107
31120 ............... 107
31170 ............... 107
312-471-140 ....... 54
31-321-140 ......... 62
31-329-140 ......... 63
31-329-170 ......... 63
31-346-140 ......... 62
31-347-140 ......... 62
31-377-150 ......... 63
31-720-140 ......... 65
31-720-170 ......... 65
31-720-190 ......... 65
31-720-220 ......... 65
31-725-170 ......... 64
31-727-150 ......... 64
31-730-150 ......... 64
31-731-150 ......... 64
31-820-185 ......... 65
31-821-185 ......... 65
3216 ................. 105
323-IN .............. 112
326-127-130 ....... 92
3308-5-PS ........... 32
33-120-115 ......... 78
342-133-020 ....... 56
342-133-030 ....... 56
3515 ................. 106
391-487-001 ..... 104
39-200-002 ......... 75
39-200-003 ......... 75
39-200-004 ......... 75
39-200-005 ......... 75
39-200-006 ......... 75
39-200-007 ......... 75
39-200-008 ......... 75
39DP ................ 111
411-244-110 ......... 8
411-244-110K ..... 24
411-245-110 ......... 8
411-245-110K ..... 24
411-614-080 ......... 9
411-615-080 ......... 9
411-932-110 ....... 20
411-933-110 ....... 20
4202 ................... 97
42-020-030 ......... 56
42-020-040 ......... 56
42-038-060 ......... 57
42-038-090 ......... 57
4204 ................... 97
42-056-080 ......... 57
42-058-080 ......... 57
4206 ................... 97
42-087-080 ......... 57
42-370-005 ......... 73
42-370-010 ......... 73
42-370-015 ......... 73
42-370-018 ......... 73
42-370-020 ......... 73
42-370-025 ......... 73
42-370-035 ......... 73
42-370-040 ......... 73
42-370-045 ......... 73
42-850-020 ....... 108
42-886-200 ....... 105
42-886-460 ....... 105
42-920-090 ......... 69
42-922-130 ......... 69
42-924-130 ......... 69
42-940-010 ......... 69
5200 ................... 97
5202 ................... 97
5204 ................... 97
5206 ................... 97
54-120-190 ......... 27
54-120-230 ......... 27
59016 ............... 102
59026 ................. 88
59027 ................. 88
59043 ................. 88
64-562 ................ 59
65-1100 ............ 114
65-2100 ............ 114
67-1065 ............ 102
67-1066 ............ 102
67-1200 ............ 113
68-1130-1 ......... 114
68-1150 ............ 114
68-1160-1 ......... 114
68-1175-1 ......... 114
68-1230-1 ......... 114
68-1260-1 ......... 114
68-1275-1 ......... 114
69-2120-1 ......... 114
69-2130-1 ......... 114
69-2150-1 ......... 114
69-2160-1 ......... 114
69-2165-1 ......... 114
69-2175-1 ......... 114
69-2220-1 ......... 114
69-2230-1 ......... 114
69-2250-1 ......... 114
69-2260-1 ......... 114
69-2265-1 ......... 114
69-2275-1 ......... 114
69-4120 ............ 114
69-4140 ............ 114
70-1700 ............ 102
7204 ................... 97
7206 ................... 97
72-1551 .............. 70
7507 ................. 115
7508 ................. 115
7509 ................. 115
7900 ................... 96
7901 ................... 96
7902 ................... 96
7904 ................... 96
7905 ................... 96
7906 ................... 96
7907 ................... 96
7909 ................... 96
7913 ................... 96
7914 ................... 96
7915 ................... 96
7916 ................... 96
7920 ................... 96
7923 ................... 96
7924 ................... 96
8323001 ........... 117
8323002 ........... 117

8329001 ........... 117
8329002 ........... 117
8336000 ........... 117
8336050 ........... 117
8338001 ........... 117
8433005 ........... 117
8433020 ........... 117
85-111-002 ......... 74
85-420-000 ......... 74
85-430-001 ......... 74
9001001 ........... 117
9005050 ........... 117
906 ................... 117
907 ................... 117
98071 ................ 60
98072 ................ 60
98196 ................ 60
98197 ................ 60
98198 ................ 60
98244 ................ 60
98245 ................ 60
98246 ................ 60
98396 ................ 60
98397 ................ 60
98398 ................ 60
98399 ................ 60
98400 ................ 60
98401 ................ 60
98402 ................ 60
98403 ................ 60
98404 ................ 60
98405 ................ 60
98406 ................ 60
98407 ................ 60
98408 ................ 60
98409 ................ 60
98410 ................ 60
98411 ................ 60
98412 ................ 60
98413 ................ 60
98414 ................ 60
98415 ................ 60
98416 ................ 60
98417 ................ 60
98418 ................ 60
98419 ................ 60
AHVM12 ........... 105
AT3020 ............. 106
AT7000 ............... 98
AT7020 ............... 98
AT7075 ............... 98
BAT-12 ............. 111
BAT-12R ........... 111
EW 150-3M ....... 108
FEP 1004 .......... 101
FEP 1005 .......... 101

FEP 1006 .......... 101
G-1 ................... 109
G-2 ................... 109
G-3 ................... 109
G-4 ................... 109
G-5 ................... 109
GR-4MM ............. 76
GR-5.5MM .......... 76
GR-5MM ............. 76
GR-7MM ............. 76
GT415 .............. 106
H001009 ........... 113
H001014 ........... 113
H001021 ........... 113
HB101H402 ...... 110
HB101M402 ...... 110
HB101M451 ...... 110
HB101S402 ....... 110
HB101SM402 .... 110
HB101SM451 .... 110
HP 062 ............. 110
IT-14 ................. 111
IT-18 ................. 111
IT-23 ................. 111
KL200-LED-1 ..... 107
KL200-LED-2 ..... 107
KN-392 ............... 78
LE5014 ............. 109
LE5016 ............. 109
LE5018 ............. 109
LE5019 ............. 109
LE5020 ............. 109
LE5022 ............. 109
LE5024 ............. 109
LE5025 ............. 109
MCS1X2 ........... 115
MORIA 201/A ..... 59
MORIA 9600 ....... 13
MORIA 9601 ....... 13
MORIA 9980 ....... 45
MORIA 9987 ....... 45
MORIA MC40 ..... 45
MORIA MC40/B .. 45
MORIA MC50 ..... 13
MORIA MC52 ..... 13
MRE 010 ........... 100
MRE 025 ........... 100
MRE 033 ........... 100
MRE 037 ........... 100
MRE 040 ........... 100
MRE 040-S-20 ... 100
MRE 050 ........... 100
MRE 080 ........... 100
PCB2000-1 ........ 108
PE 10 ................ 100
122
PE 160 ..............
PE 190 ..............
PE 20 ................
PE 200 ..............
PE 31 ................
PE 5 ..................
PE 50 ................
PE 60 ................
PE 8 ..................
PE 90 ................
PEEK 10263 ......
RET-2................
RET-3................
RET-4................
Sera-110 ...........
SIL 025 .............
SIL 037 .............
SIL 047 .............
SIL 065 .............
SIL 080 .............
W810 ................
YS402 ...............
YS451 ...............
100
100
100
100
100
100
100
100
100
100
101
111
111
111
117
100
100
100
100
100
105
110
110
2
4
The making of a Forceps

1. The raw material is delivered coarsely shaped, and can be manufactured into several different forceps.
2. The two sides of the forceps are carefully welded together under high pressure and heat.
3. Each forceps are grinded according to drawings and tips etc are measured with electronic callipers.
4. During the manufacturing process the instruments are cleaned several times to avoid decontamination.
5. The forceps are put on a belt for 20 minutes to be hardened at 1000C in vacuum (maintained by the re).
6. The forceps are polished with different rollers.
7. Ready for quality checks.
8. Each instrument is hand etched with article number and logo.
9. The instruments are put on stock, waiting to be delivered.
These pictures were taken at the Allgaier Instrumente GmbH

site, our preferred supplier of Surgical Instruments. Allgaier
meets the ISO 9001/13485 and EC Certicates standards and
all our surgical instruments are made in the EU.
AgnTho's AB
Pyrolavgen 3
Tel: +46 (0)8 766 57 15
Fax: +46 (0)8 766 27 15
www.agnthos.se
All our surgical instruments are handmade, why measurements and appearance in
this catalogue may differ slightly. This catalogue is to the best of our knowledge
accurate and correct; however AgnTho's denies all liability and risk due to misprints
and/or inaccuracy. All articles in this catalogue are subject to change without notice.
AgnTho's AB 2011
AgnTho's AB
Pyrolavgen 3
Tel: +46 (0)8 766 57 15
Fax: +46 (0)8 766 27 15
www.agnthos.se
AgnThos AB 2011

Agnthos 5 Web PDF

Uploaded by

Copyright:

Available Formats

Agnthos 5 Web PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Agnthos 5 Web PDF

Uploaded by

Copyright:

Available Formats

2

The making of a Forceps

These pictures were taken at the Allgaier Instrumente GmbH

All new Dumont

Please have a look at our new

Our popular selection of

Our full range of

New added section with temperature

Our well known full range

Special Scissors .................................................. 16

Tungsten Carbide ..................................... 19

Other Scissors .................................................... 26

SCISSORS Surgical Scissors

Surgical Scissors SCISSORS

SCISSORS Surgical Scissors

Iris Scissors SCISSORS

SCISSORS Iris Scissors

Spring Scissors SCISSORS

The stated cutting edge may

SCISSORS Spring Scissors

Spring Scissors SCISSORS

SCISSORS Spring Scissors

Spring Scissors SCISSORS

SCISSORS Special Scissors

Special Scissors SCISSORS

SCISSORS Special Scissors

Special Scissors SCISSORS

effective solution for your surgical instruments. The

Carbide adds several advantages to your instrument,

properties of this alloy have also beneted the special

whether there is a need for a hard and durable sharp-

cross patterns that can be found on the needle holders,

ness or you are looking for a long-lasting cost effective

rendering a much more secure needle grip. Tungsten

instrument. This special alloy hold the sharpness of

Carbide inserts are only applied (usually glued or

the instrument several times longer compared to

welded ) to the working surface of the instrument which

provide the right exibility to the instruments but with

This feature, compared to the extra initial cost for

SCISSORS Special Scissors

Special Scissors SCISSORS

SCISSORS Special Scissors

resistance to corrosion and chemicals. The special

available, using Super Cut technology combined

matte black ceramic coating avoids any reection

with Tungsten Carbide inserts coated with ceramics.

and provides a low-friction cut which minimizes tissue

Since ceramic is one of the hardest materials on earth

damage. This is one of the best scissors available on

this coating provides an exceptional hard and smooth

the market; use your Ceramic Cut scissors for your

surface. This special treatment gives the scissors a high

most uncompromising work.

SCISSORS Special Scissors

Special Scissors SCISSORS

SCISSORS Other Scissors

Excellent for cutting tail

FOX SAW EDGE