Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

1997 SeaDoo XP (5662) Operator's Guide Supplement

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

www.SeaDooManuals.

net

smo9703a.fm5 Page 1 Thursday, November 13, 1997 1:59 PM

SEA-DOO XP (5662) OPERATORS GUIDE


SUPPLEMENT ___________________________________
NOTE: This supplement must be used in conjunction with the 1997 Sea-Doo
Operators Guide.

PAGE 20
LOCATION OF THE IMPORTANT LABELS
8

6
10

F08L03L

www.SeaDooManuals.net

smo9703a.fm5 Page 2 Thursday, November 13, 1997 1:59 PM

"THIS BOAT IS NOT REQUIRED TO COMPLY WITH THE


FOLLOWING U.S. COAST GUARD SAFETY STANDARDS
IN EFFECT ON THE DATE OF CERTIFICATION:

CAUTION
TO AVOID POSSIBLE ENGINE FLOODING WHEN ROLLED OVER :

Safe Loading
Flotation
Powered Ventilation

Fuel System
Display of Capacity
Information

AS AUTHORIZED BY U.S. COAST GUARD GRANT OF


EXEMPTION (CGB 88-001)."
Bombardier Corp.

MAKE SURE ENGINE IS OFF


GRAB INLET GRATE AND STEP
ON BUMPER RAIL

7575 Bombardier Court, Wausau, WI 54401

ROLL BOAT CLOCKWISE

Made in Canada/Fabriqu au Canada

Bombardier Inc. Rd./Enr.,1988

F02L2DY

F02L2EY

8
WARNING

DO NOT BOOST BATTERY


WHILE INSTALLED.
F00L05Y

CAUTION
USE BOMBARDIER-ROTAX INJECTION OIL OR
HIGHER QUALITY LOW ASH API TC INJECTION
OIL FOR 2 CYCLES ENGINES.
NEVER USE NMMA TC-W, TC-WII or TC-W3 outboard motor oils.
F00L06Y

10
Read

all w
arnin
g labe
ments
ls, Ope
befo
rator G
or de
uide &
ath ca re operatin
safety
g. Seve
n resu
infor
re injury
lt from
matio
ignorin
n or im
g
su
proper
use of th ch
e watercr
aft.

docu

.
LING
E FUE LING.
EFOR
E
VER B
LE FU
NE CO EVEL WHI
GI
EN
WARNING
L
CLOSE
RAFT
ATERC
Check throttle &
KEEP W
LL.
steering before starting engine.
OVERFI
rned off.
Directional control
EM .
DO NOT LEVEL.
ased or engine tu
SYST
L
Do not splash otheris lost when throttle is rele
OI
K FUEL
CHECK
or jump waves or wakes.
LY, CHEC
Properly attach
s. PERIODICAL
n
safety tether to your PFD.
atio
gul
re
Kee
ting

p a safe distance from other water users. Observe boa


This watercraft
is not design for night time operation.

F08L04L

www.SeaDooManuals.net

smo9703a.fm5 Page 3 Thursday, November 13, 1997 1:59 PM

PAGE 33
2) Throttle Lever
ADDITION: Do not activate or jerk throttle lever unnecessarily, carburetors are
fed with a fuel acceleration pump. The acceleration pump delivers fuel to the
engine each time throttle lever is applied.

CAUTION

Engine can be flooded if throttle lever is applied several times. If engine


is flooded, it will not start.

PAGE 46
Recommended Oil
CHANGE: Use BOMBARDIER ROTAX INJECTION OIL which is available from
authorized dealers. It is a blend of specially selected base oils and additives which
provides outstanding lubrication, engine cleanliness and minimum spark plug
fouling.
NOTE: High quality low ash API TC injection oil for 2-cycle engines can be used
if BOMBARDIER ROTAX INJECTION OIL is not available.

CAUTION

Never use 4-cycle motor oil and never mix these with outboard motor oil.
Do not use NMMA TC-W, TC-W2 or TC-W3 outboard motor oils or other
ashless type 2-cycle oil. Avoid mixing different brands of API TC oil as
resulting chemical reaction may cause severe engine damage.

PAGE 51
Steering and Throttle Systems
CHANGE: Check throttle lever ONCE for free and smooth operation. It must return to its initial position immediately after it is released.

PAGE 73
Throttle and Choke Cable Inspection
Throttle Cable
CHANGE: Depress and release the throttle lever ONCE. It must operate smoothly and return to its initial position without any hesitation. Refer to an authorized
dealer if necessary.

www.SeaDooManuals.net

smo9703a.fm5 Page 4 Thursday, November 13, 1997 1:59 PM

SPECIFICATIONS________________________________
ENGINE
Engine type
Induction type
Exhaust system
Exhaust valve
Lubrication

XP (5662)
Bombardier-Rotax 787, 2-stroke
Rotary valve
Water cooled/water injected with regulator
Rotax Adjustable Variable Exhaust (R.A.V.E.)
Oil injection
BOMBARDIER ROTAX
INJECTION OIL
2
781.6 cm3 (47.7 in3)
7200 ( 50) RPM

Type
Oil type

Number of cylinders
Displacement
Rev limiter setting
COOLING
Type

Water cooled, total loss type.


Direct flow from propulsion unit.

ELECTRICAL
Magneto generator output
Ignition system type
Spark plug
Make and type
Gap
Starting system
Battery
Fuse

CARBURETION
Fuel type
Carburetor

180 W @ 6000 RPM


Digital DC-CDI
NGK, BR8ES
0.5 - 0.6 mm
(.020 - .024 in)
Electric starter
12 V, 19 A

Starting
system
Charging
system
VTS system

5A
2 x 15 A
7.5 A
Regular unleaded gasoline
BN 40I
Diaphragm type with acceleration pump
Quantity: 2

www.SeaDooManuals.net

smo9703a.fm5 Page 5 Thursday, November 13, 1997 1:59 PM

PROPULSION
Propulsion system
Jet pump type
Transmission
Impeller shaft reservoir oil type
Pivoting angle of direction (nozzle)
Pivoting angle of variable trim system
Minimum required water
level for jet pump
PERFORMANCE
Cruising time at full
throttle

XP (5662)
Bombardier Formula pump
Axial flow, single stage
Direct drive/split FR and RR
SEA-DOO jet pump synthetic
polyolester oil 75W90 GL5
~ 26
8
90 cm (3 ft)

Fuel tank without


reserve
Fuel tank
reserve

DIMENSIONS
Number of passengers
Overall length
Overall width
Overall height
Weight
Load limit
(passengers + luggage)
CAPACITIES
Fuel tank
Impeller shaft
reservoir

N.A.
N.A.

2
272 cm (107 in)
111 cm (43.7 in)
103 cm (40.6 in)
238 kg (525 lb)
159 kg (351 lb)

43.5 L (11.5 U.S. gal)


70 mL (2.4 U.S. oz)
Up to plug
4 L (1.1 U.S. gal)

Capacity
Oil level

Oil injection reservoir

Refer to load limit.


N.A.: Not Applicable.
BOMBARDIER INC. reserves the right to make changes in design and specifications and/or to make additions to, or improvements in its products without imposing any obligation upon itself to install them on its products previously manufactured.

www.SeaDooManuals.net

www.SeaDooManuals.net

You might also like