SD40A

1N5802 thru 1N5806
VOIDLESS-HERMETICALLY-SEALED
ULTRAFAST RECOVERY GLASS
RECTIFIERS
SCOTTSDALE DIVISION
These Ultrafast Recovery rectifier diodes are military qualified to MIL-PRF-19500/477

and are ideal for high-reliability applications where a failure cannot be tolerated. These
industry-recognized 2.5 Amp rated rectifiers for working peak reverse voltages from 50 to
150 volts are hermetically sealed with voidless-glass construction using an internal
Category I metallurgical bond. They are also available in surface-mount packages (see
separate data sheet for 1N5802US thru 1N5806US). Microsemi also offers numerous
other rectifier products to meet higher and lower current ratings with various recovery
time speed requirements including standard, fast and ultrafast in thru-hole and surfacemount packages.
A Package
IMPORTANT: For the most current data, consult MICROSEMIs website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Ultrafast recovery 2.5 Amp rectifier series 50 to 150V

Military and other high-reliability applications
Switching power supplies or other applications
requiring extremely fast switching & low forward loss
High forward surge current capability
Low thermal resistance
Controlled avalanche with peak reverse power
capability
Inherently radiation hard as described in Microsemi
Popular JEDEC registered 1N5802 to 1N5806 series

Voidless hermetically sealed glass package
Extremely robust construction
Triple-layer passivation
Internal Category I Metallurgical bonds
JAN, JANTX, JANTXV, and JANS available per MIL-PRF19500/477
Surface mount equivalents also available in a square end-cap
MELF configuration with US suffix (see separate data sheet
for 1N5802US thru 1N5806US)
MicroNote 050
MAXIMUM RATINGS
WWW . Microsemi .C OM
APPEARANCE
DESCRIPTION
MECHANICAL AND PACKAGING
Junction Temperature: -65 C to +175 C

Storage Temperature: -65oC to +175oC
Average Rectified Forward Current (IO): 2.5 A @ TL = 75C
Thermal Resistance: 36 C/W junction to lead (L=.375 in)
Thermal Impedance: 4.5oC/W @ 10 ms heating time
Forward Surge Current: 35 Amps @ 8.3 ms half-sine
Capacitance: 25 pF @ VR = 10 Volts, f = 1 MHz
Solder temperature: 260C for 10 s (maximum)
CASE: Hermetically sealed voidless hard glass with

Tungsten slugs (package dimensions on last page)
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
over Copper. Note: Previous JANS inventory had
solid Silver axial-leads and no finish.
MARKING: Body painted and part number, etc.
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-296
Weight: 340 mg
ELECTRICAL CHARACTERISTICS
TYPE
BREAKDOWN
VOLTAGE
(MIN.)
@ 100A
VBR
AVERAGE
RECTIFIED
CURRENT
IO1 @
TL=+75C
(NOTE 1)
AMPS
AVERAGE
RECTIFIED
CURRENT
IO2 @
TA=+55C
(Note 2)
AMPS
MAXIMUM
FORWARD
VOLTAGE
@1A
(8.3 ms pulse)
VF
REVERSE
CURRENT
(MAX)
@ VRWM
IR
SURGE
CURRENT
(MAX)
IFSM
(NOTE 3)
AMPS
A
o
o
25 C 100 C
1N5802
50
55
2.5
1.0
1
50
35
1N5803
75
80
2.5
1.0
1
50
35
1N5804
100
110
2.5
1.0
0.875
0.800
1
50
35
1N5805
125
135
2.5
1.0
1
50
35
1N5806
150
160
2.5
1.0
0.875
0.800
1
50
35
NOTE 1: IO1 is rated at 2.5 A @ TL = 75C at 3/8 inch lead length. Derate at 25 mA/C for TL above 75C.
NOTE 2: IO2 is rated at 1.0 A @ TA = 55C for PC boards where thermal resistance from mounting point to
ambient is sufficiently controlled where TJ(max) does not exceed 175C. Derate at 8.33 mA/C for TA above 55C.
o
NOTE 3: TA = 25 C @ IO = 1.0 A and VRWM for ten 8.3 ms surges at 1 minute intervals
NOTE 4: IF = 0.5 A, IRM = 0.5 A, IR(REC) = .05 A
VOLTS
Copyright 2007
1-15-2007 REV A
VOLTS
VOLTS
o
o
25 C
100 C
0.875
0.800
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
REVERSE
RECOVERY
TIME (MAX)
(NOTE 4)
trr
ns
25
25
25
25
25
Page 1
1N5802 1N5806
WORKING
PEAK
REVERSE
VOLTAGE
VRWM
1N5802 thru 1N5806
SCOTTSDALE DIVISION
VBR
VRWM
IO
VF
IR
C
trr
SYMBOLS & DEFINITIONS

Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature
range
Average Rectified Output Current: Output Current Averaged over a full cycle with a 50 Hz or 60 Hz sine-wave
input and a 180 degree conduction angle
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature
Capacitance: The capacitance in pF at a frequency of 1 MHz and specified voltage
Reverse Recovery Time: The time interval between the instant the current passes through zero when changing
from the forward direction to the reverse direction and a specified recovery decay point after a peak reverse
current occurs.
WWW . Microsemi .C OM
Symbol
VOIDLESS-HERMETICALLY-SEALED
ULTRAFAST RECOVERY GLASS
RECTIFIERS
GRAPHS
FIGURE 1
OUTPUT CURRENT vs. LEAD TEMP.
PACKAGE DIMENSIONS inches/[mm]
1N5802 1N5806
NOTE: Lead tolerance = +0.002/-0.003 inches

Copyright 2007
1-15-2007 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2

SD40A

Uploaded by

Copyright:

Available Formats

SD40A

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SD40A

Uploaded by

Copyright:

Available Formats

1N5802 thru 1N5806

These Ultrafast Recovery rectifier diodes are military qualified to MIL-PRF-19500/477

Ultrafast recovery 2.5 Amp rectifier series 50 to 150V

Popular JEDEC registered 1N5802 to 1N5806 series

MECHANICAL AND PACKAGING

Junction Temperature: -65 C to +175 C

CASE: Hermetically sealed voidless hard glass with

1N5802 thru 1N5806

SYMBOLS & DEFINITIONS

NOTE: Lead tolerance = +0.002/-0.003 inches

You might also like