Lightweight composite stone panels consist of a thin natural stone veneer bonded to a backing material like aluminum, fiberglass, or ceramic. This overcomes issues with natural stone like fragility and weight. Composite panels can be made from various stone materials and used in wall claddings, counters, and more. They are lighter than solid stone, easier to install, and maximize stone usage. Different backing materials provide varying strengths, weights, and applications. Panels are made by bonding cut stone to backings then cutting and polishing the bonded sheets. While composite panels offer benefits, proper materials and installation are needed to ensure strength and performance.
Lightweight composite stone panels consist of a thin natural stone veneer bonded to a backing material like aluminum, fiberglass, or ceramic. This overcomes issues with natural stone like fragility and weight. Composite panels can be made from various stone materials and used in wall claddings, counters, and more. They are lighter than solid stone, easier to install, and maximize stone usage. Different backing materials provide varying strengths, weights, and applications. Panels are made by bonding cut stone to backings then cutting and polishing the bonded sheets. While composite panels offer benefits, proper materials and installation are needed to ensure strength and performance.
Lightweight composite stone panels consist of a thin natural stone veneer bonded to a backing material like aluminum, fiberglass, or ceramic. This overcomes issues with natural stone like fragility and weight. Composite panels can be made from various stone materials and used in wall claddings, counters, and more. They are lighter than solid stone, easier to install, and maximize stone usage. Different backing materials provide varying strengths, weights, and applications. Panels are made by bonding cut stone to backings then cutting and polishing the bonded sheets. While composite panels offer benefits, proper materials and installation are needed to ensure strength and performance.
Lightweight composite stone panels consist of a thin natural stone veneer bonded to a backing material like aluminum, fiberglass, or ceramic. This overcomes issues with natural stone like fragility and weight. Composite panels can be made from various stone materials and used in wall claddings, counters, and more. They are lighter than solid stone, easier to install, and maximize stone usage. Different backing materials provide varying strengths, weights, and applications. Panels are made by bonding cut stone to backings then cutting and polishing the bonded sheets. While composite panels offer benefits, proper materials and installation are needed to ensure strength and performance.
Composite stone panel consists of a thin natural stone veneer (3 mm - 5 mm) bonded to a backing panel. The backing panel can be of aluminum (honeycombed or ply), fiberglass, ceramic or other material, depending on the type of use. The two parts are tightly bonded together with high strength glue under high temperature and pressure. The resultant composite panel not only preserves the natural beauty of the granite or marble, it also overcomes inherent properties and characteristics like fragility and heaviness present in natural stones. Composite panels can be produced virtually in any natural stone material including granite, marble, limestone, slate and sandstone. They are used in a wide range of applications like exterior and interior wall claddings, elevators, over-lays, counter-tops and other special applications.
Fig. 4.1 A cross-section of a typical aluminum honeycombed composite panel.
4.1 CHARACTERISTICS OF COMPOSITE STONE PANELS
a. Light weight The standard composite panel comprising stone veneer with plastic laminated panels reinforced with honeycomb aluminium is 1/2 or 1/3 lighter than solid stone panel. This reduces the dead load of the building. As it is lighter, the erection speed is also improved, especially in high-rise building claddings. There is therefore savings in structural requirements, labour and time. Besides providing stability to the thin layer stone, the fabrication technique eliminates warpage a natural characteristic often seen in long stone panels. The composite stone panel can be installed on most substrates using a variety of installation methods including adhesion or mechanical fastenings like concealed screws or interlocking channels.
Fig. 4.2 Lightweight panels and mechanical fastening installation expedite erection.
33
b. Better impact resistance, flexural strength and water resistant
Composite stone panel has better impact resistance and flexural strength due to their backing support. The backing support panels can be flexed, making them ideal for a variety of architectural applications. They reduce the fragile and brittle properties of natural stones and can be used in place of natural stones for their aesthetic beauty. In addition, the epoxy skinned composite panel is impervious to water penetration, even with open structured stones such as travertine or limestone.
Fig. 4.3 The backing technology yields
better flexural strength.
c. Increase stone utilization ratio
The use of thin stone veneer in composite panels maximizes the usage of natural stone. The utilization ratio is generally about 3 times higher than if the material comprise wholly of natural stone. For example, 1 m3 of raw stone can be used to fabricate up to 135 m2 of composite stone panels compared to about 45 m2 of natural stone panels. This is a more efficient use of limited resources, reduces the exploitation of natural resources and promotes environmental conservation. Furthermore, getting a larger quantity of stone veneer from a single block allows the manufacturer to achieve a more consistent tone and texture in the end-product.
Fig. 4.4 Thin cuts from same block increases utilization ratio.
34
GOOD INDUSTRY PRACTICES
4.2 TYPES OF COMPOSITE BACKINGS
a. Aluminum honeycomb backing
b. Aluminum polymer backing
c. Fiberglass net backing
The honeycomb backing is suitable for
The thin polyester aluminum backing
This method is more suitable for granite
both marble and granite finish. The
panel is about 2.5 to 4 mm thick and
and less common for marble finish
thickness of the stone can be as thin as 3
such composite panels are suitable for
as marble is softer and more fragile
mm and the backing can be in the range
applications requiring light weight and
than granite. The advantages of using
of 10 to 25 mm. This backing is not only
thinness. It can be used for internal wall
fibreglass net backing are its strength,
lightweight, it also has high strength,
claddings, lift interiors and decorative
stiffness and lightness. The panels can
better resistance to moisture, corrosion
ceilings. Apart from being light weight,
be installed using either adhesive or
and fire. Furthermore, the aluminum
the polyester aluminum panels are more
mechanical fastening.
alloy plates between the honeycombs
even and resistant to corrosion and
provide good impact resistance and
chemical attack.
1 mm Fiberglass
7 mm Granite
flexural strength. The panels properties
permit its use in internal or external wall claddings and counter tops.
Fig. 4.7 Layer of fiberglass net backing
with granite.
Fig. 4.5 Aluminum honeycomb backing with
Fig. 4.6 Thin aluminum polymer backing
thin marble.
with marble.
d. Glass backing
e. Ceramic backing
The composite panel is formed by glass,
This method is often used with marble
stone and epoxy. The glass can be either
finish as marble is softer and have the
tempered or laminated and bonded to the
characteristic of open veins. The marble
stone using a translucent epoxy that does
needs a stronger backing particularly
not affect the natural colour of the stone.
for flooring applications. The composite
This method works well with stones of
tiles can be installed by cementing for
translucent onyx, alabaster or white
flooring or mechanically anchored for
marble as the pattern of natural veins of
wall claddings. The marble can be cut
the stone will glitter and be transparent
to ultra-thin veneer of 3 mm thickness
under lighting. Such composite panels
and adhered to ceramic backing of 8 mm
are used in hotel proscenium, feature
thickness. Although the ceramic backing
walls, elevators and ornamental ceilings.
gives a strong base, these panels are
heavier than the other methods.
Fig. 4.8 Glass backing with marble is
bonded by translucent epoxy.
Fig. 4.9 Ceramic backing with marble:
Primarily for flooring.
35
4.3 AN OVERVIEW OF FABRICATION OF COMPOSITE STONE PANELS
The natural stone from the quarry in the form of blocks are cut into thin slabs. They are bonded to backing panels by special resin followed by application of uniform heat and pressure to ensure proper bonding throughout the whole slab. Once the glue has set, the slab is sawn into half and the pieces are polished or honed. Finally, the pieces are cut to size mechanically according to customers requirements.
Apply resin on stone to bond with
backing material.
Sawn into half.
QC Check.
Fig. 4.10 Composite panel fabrication process.
Double sided bonded backing.
Polish.
Packing.
Apply pressure & heat.
Mechanical cutting.
36
GOOD INDUSTRY PRACTICES
4.4 LIMITATIONS AND CONSIDERATIONS IN
COMPOSITE STONE PANELS Although the technology economizes the use of natural stone, speeds up installation and improves the performance and range of applications, it may not be cost effective in applications involving natural stones with low and medium cost range. However for applications that use high-end luxurious stones like onyx marble or sky blue granite, there are potential benefits and savings as the usage of the more costly raw material is greatly reduced. The strength and performance of the composite stone panel are very much dependant on the manufacturing technology and the quality of resin used. Hence it is important to ensure the right materials and suppliers are chosen to supply the product. The choice of installation methods e.g. mechanical fastening or by adhesive glue, requires appropriate skilled labour to ensure the effectiveness of the installation. Hence it may be necessary to ensure there are adequately trained workers to carry out the installation works before considering light weight composite stone panels.
