Komatsu 730 e
Komatsu 730 e
Komatsu 730 e
324319 kg 715,000 lb
GROSS HORSEPOWER
1491 kW 2,000 HP
730E
730E
730E
SPECIFICATIONS
ENGINE
Make and model. . . . . . . . . . . . . . . . . . . . . . . Komatsu SSA16V159
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diesel
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operating cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 stroke
*Rated brake power . . . . . . . . . . . 1491 kW 2,000 HP @ 1900 rpm
**Flywheel power . . . . . . . . . . . . . 1388 kW 1,860 HP @ 1900 rpm
Weight (wet). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5294 kg 11,670 lb
NOTE: This engine includes the Engine Monitor System
*Rated brake power is the output of the engine as installed in this machine, at governed rpm and with engine
manufacturers approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
**Flywheel power is the rated power at the engine flywheel minus the average accessory losses.
Accessories include fan and charging alternator. Rating(s) represent gross engine performance in
accordance with SAE J1349 conditions.
ELECTRIC DRIVE
AC/DC CURRENT
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G.E. GTA-22
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Statex III Fuelsaver
*Motorized wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G.E. 788
**Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.825:1
Speed (maximum) . . . . . . . . . . . . . . . . . . . . 55.7 km/h 34.6 mph
*Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length,
rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to
assure proper application.
FRAME
Advanced
technology,
full
butt-welded
box-sectional
ladder-type frame with integral ROPS supports,
integral
front bumper, rear tubular cross members, steel castings
at all critical stress transition zones, rugged continuous
horsecollar.
Plate material . . . . . . . . . . . . . . . . . . . . . . . . . 482.6 mPa 70,000 psi
tensile strength steel
Casting material . . . . . . . . . . . . . . . . . . . . . . . 620.5 mPa 90,000 psi
tensile strength steel
Rail width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279 mm 11''
Rail depth (minimum) . . . . . . . . . . . . . . . . . . . . . . . . . . . 813 mm 32''
Top and bottom plate thickness. . . . . . . . . . . . . . . . . . . 32 mm 1.25''
Side plate thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 mm 0.75''
Drive axle mounting. . . . . . . . . . . . . . . . . . . . . . . . . . High-mount ball
and socket joint at front
Drive axle alignment. . . . . . . . . . . . . Swing link between frame and axle
BRAKING SYSTEM
Service brakes: all-hydraulic actuated
Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wheel speed disc.
Three calipers on a 1168 mm 46.0" O.D. disc.
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual disc armature speed.
Two 635 mm 25" O.D. discs per side.
One caliper per disc.
Emergency brakes . . . . . . . . . . . . . . . . . . Automatically applied prior
to hydraulic system pressure dropping below level
required to meet secondary stopping requirements.
Wheel brake locks. . . . . . . . . . . . . . . . . . . . . . . . . . . Switch activated
Parking brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring-applied,
hydraulically released, with speed application protection.
Electric dynamic retarder (max.) ...........................2759 kW 3,700 hp
Continuously rated blown grids. Two-speed overspeed retarding.
Extended range retarding. Reverse retarding.
BODY
SUSPENSION
All-welded steel flat floor body with horizontal bolsters and full canopy.
Eyebrow, rear wheel rock ejectors, body up cable and rubber mounts
on frame are standard. Pivot exhaust heating optional.
Bottom plate . . . . . . . . . . . . . 19 mm 0.75'' 1034 mPa 150,000 psi
tensile strength steel (two-piece)
Front sheet . . . . . . . . . . . . . . . 12 mm 0.47'' 690 mPa 100,000 psi
tensile strength steel
Side sheet . . . . . . . . . . . . . . . . 9 mm 0.35'' 690 mPa 100,000 psi
tensile strength steel
Struck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 m3 101 yd3
Standard SAE heaped 2:1 . . . . . . . . . . . . . . . . . . . 111 m3 145 yd3
HYDRAIR II
Variable rate hydro-pneumatic with integral rebound control.
Maximum front stroke . . . . . . . . . . . . . . . . . . . . . . . 335 mm 13.2''
Maximum rear stroke . . . . . . . . . . . . . . . . . . . . . . . 279 mm 11.0''
Maximum rear axle oscillation . . . . . . . . . . . . . . . . . . . . . . . 9.75
COOLING SYSTEM
L&M radiator assembly with sight gauge. Deaeration-type
top tank. Dual pass cooling.
Radiator frontal area . . . . . . . . . . . . . . . . . . . . . . . . 4.33 m2 46.6 ft2
CAB
Advanced Operator Environment with integral 4-post ROPS/FOPS
structure (meets J1040 Apr88), adjustable air suspension seat with
lumbar support and arm rests, passenger seat, maximum R-value
insulation, tilt and telescoping steering wheel, electric windshield
wipers with washer, tinted glass, power windows, Komatsu Payload
Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr
air conditioning (HFC - 134A refrigerant).
SERVICE CAPACITIES
Cooling system . . . . . . . . . . . . . . . . . . . . . . . .409 L . . 108 U.S. gal
*Crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . .223 L . . . 59 U.S. gal
Hydraulic system . . . . . . . . . . . . . . . . . . . . . . .731 L . . 193 U.S. gal
Motor gear box . . . . . . . . . . . . . . . . . . . . . . . . .40 L . . 10.5 U.S. gal
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3217 L . . 850 U.S. gal
*Includes lube oil filters
730E
730E
12.51 m
41'1"
RAISED
5.61 m
18'5''
EMPTY
7.54 m 24'9"
7.25 m 23'9"
3.43 m 11'3"
8.43 m 27'8"
730 E
2.08 m
6'10''
6.25 m
20'6"
EMPTY
2.90 m
9'6"
45
1.76 m
5'9"
1.14 m 3'9"
3.66 m 12'0"
5.89 m 19'4"
12.83 m 42'1"
3.28 m 10'9"
4.44 m 14'7"
5.57 m 18'3"
6.68 m 21'11"
7.25 m 23'9"
6.85 m 22'6"
Bodies
Struck
2:1 Heap
Loading
Height*
Standard
77 m3 101 yd3
5.61 m 18'5''
*Exact load height may vary due to tire make, type, and inflation pressure.
HYDRAULIC SYSTEM
Steering. . . . . . . . . Accumulator-assisted with twin cylinders provide
constant rate steering. Emergency power steering
automatically supplied by accumulator (meets SAEJ1511)
Turning circle diameter (SAE). . . . . . . . . . . . . . . . . . . . . 28.0 m 92 ft
Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731 L 193 U.S. gal
Filtration. . . . . . . . . . . . . . . . . . . . . . . . . In-line replaceable elements
Suction . . . . . . . . . . . . . . . . . . . . . . . . . Single, full-flow, 100 mesh
Hoist and steering . . . . . . . . . Dual, full-flow, in-line, high-pressure
Brake component cabinet. . . . . . . . . . Above-deck, easily accessible
with diagnostic test connector.
Hoist . . . . . . . . . . . . . . . Two 3-stage dual-acting outboard cylinders,
internal cushion valve.
Hoist times
Power-up loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 sec
Power-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 sec
Float-down empty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 sec
Pumps
Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear-type pump
with output of 513 lpm 135.6 gpm
@1900 rpm and 17240 kPa 2500 psi
Steering and brake. . . . . . . . . . . . . . . . . . . . . . . . Vane-type pump
with output of 235 lpm 62.0 gpm
@1900 rpm and 18960 kPa 2,750 psi
System relief pressures
Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17240 kPa 2,500 psi
Steering and brake . . . . . . . . . . . . . . . . . . . . 27580 kPa 4,000 psi
Quick disconnects standard for powering disabled truck
and for system diagnostics.
2.32 m
7'7"
4.68 m 15'4"
7.03 m 23'1"
ELECTRICAL SYSTEM
4 x 8D 1450 CCA, 12 volt batteries, in series/parallel, bumpermounted with disconnect switch.
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-volt, 140 amp
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-volt
Cranking motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . two/24-volt
WEIGHT DISTRIBUTION
Empty vehicle weight (wet, 100% fuel, no options, std Komatsu body, std tires)
Front axle . . . . . . . . . . . . . . . . . . . . . . 67484 kg
148,776 lb
Rear axle . . . . . . . . . . . . . . . . . . . . . . 73108 kg
161,174 lb
Total EVW . . . . . . . . . . . . . . . . . . . . . 140592 kg
309,950 lb
Standard Komatsu body . . . . . . . . . . . 25612 kg
56,464 lb
Standard tire weight . . . . . . . . . . . . . . 18371 kg
40,500 lb
Gross vehicle weight (Nominal)
Front axle . . . . . . . . . . . . . . . . . . . . . . 98941 kg
Rear axle . . . . . . . . . . . . . . . . . . . . . 225377 kg
Total . . . . . . . . . . . . . . . . . . . . . . . . . 324319 kg
Nominal payload* . . . . . . . . . . . . . . . 183729 kg
218,129 lb
496,871 lb
715,000 lb
405,050 lb
203 U.S. ton
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
(Optional equipment may change operating weight).
7-step Extended Range Retarding (ERR)
Exhaust-heated body
Additional high-mounted headlights
Filtered air inlet system
Air cleaner evacuators
Fire extinguisher 9 kg 20 lb
Arctic protection package (suspensions,
Fog lightsHalogen (2) lower grille
antifreeze/lube below -40 C)
Hot start (engine oil, coolant, hydraulic tank)
Back-up lights, deck mounted
Hubometer (miles or kilometers)
Body liners*
Modular Mining System (MMS) ready
*Available factory-installed or non-installed. All other options and accessories listed are available factory installed only.
AESS564-04
www.KomatsuAmerica.com
DK12(2.5M) C
12/06 (EV-2)