Spec List API
Spec List API
Spec List API
API 1104
API 1107
API 1110
API 2200
API 2201
Pipelines
Steel Pipeline Crossing Railroads and Highways
Welding of Pipelines and Related Facilities
Pipeline Maintenance Welding Practices
Pressure Testing of Liquid Petroleum Pipelines
Repairing Crude Oil, LPG, and Product Pipelines
Procedures for Welding or Hot Tapping of Equipment in Service
API 578
Material Verification Program for New and Existing Alloy Piping System
API 910
Digest of State Boiler, Pressure Vessel, Piping, and Aboveground Storage Tank Rules and R
API 14E
API 91-62
API 2000
API 2350
API 2510
Storage Tanks
Venting Atmospheric and Low-Pressure Storage Tanks
Overfill Protection for Storage Tanks in Petroleum Facilities
Design and Construction of LPG Installations
API 2610
Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities
API 620
API 650
API 651
API 652
API 653
API 910
Digest of State Boiler, Pressure Vessel, Piping, and Aboveground Storage Tank Rules and R
API 2001
API 2009
API 2015
API 2021
Safe Welding, Cutting, and Other Hot Work Practices in Refineries, Gas Plants, and Petroch
Safe Entry and Cleaning of Petroleum Storage Tanks
Management of Atmospheric Storage Tank Fires
API 2021A Interim Study-Prevention and Suppression of Fires in Large Aboveground Atmospheric Sto
API 2510A Fire-Protection Considerations for the Design and Operation of LPG Storage Facilities
API 910
API 14C
API 14J
Digest of State Boiler, Pressure Vessel, Piping, and Aboveground Storage Tank Rules and R
Design of Surface Safety Systems Federal Ruling
Design and Hazards Analysis for Offshore Production Facilities
API 505
API 510
API 920
Pressure Vessel Inspection Code: Maintenance Inspection, Rating, repair, and Alteration
Prevention of Brittle Fracture of Pressure Vessels
Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II- Install
Guide for Pressure-Relieving and Depressuring Systems
Flanged Steel Pressure Relief Valves
Seat Tightness of Pressure Relief Valves
API 530
API 531
API 534
API 535
API 560
Fired Heater
Calculation of Heater Tube Thickness in Petroleum Refineries
Measurement of Noise from Fired Process Heaters
Heat Recovery Steam Generators
Burners for Fired Heaters in General Refinery Services
Fired Heaters for General Refinery Services
API 910
Digest of State Boiler, Pressure Vessel, Piping, and Aboveground Storage Tank Rules and R
API 573
API 574
API 575
API 576
API 591
API 589
API 590
API 591
API 653
Inspection
Inspection of Fired Boilers and Heaters
Inspection Practices for Piping System Components
Inspection of Atmospheric and Low-Pressure Storage Tanks
Inspection of Pressure-Relieving Devices
User Acceptance of Refinery Valves
Fire test for Evaluation of valve Stem Packing
Steel Line Blanks
User Acceptance of Refinery Valves
Tank Inspection, repair, Alteration, and Reconstruction
API 850
API Standards 620, 650, and 653 Interpretations-Tank Construction and In-Service Inspectio
API 579
API 581
Reliability
Fitness-for-Service
Risk-Based Inspection Base Resource Document
API 670
API 683
Quality Improvement Manual for Mechanical Equipment in Petroleum, Chemical, and Gas In
API 594
API 598
API 599
Valves
Check valves: Wafer, Wafer-Lug, and Double flanged Type
Valve Inspection and Testing
Metal Plug valves-Flanged and Welding Ends
API 600
Steel Gate Valves-Flanged and Butt-Welding Ends, Bolted and Pressure Seal Bonnets
API 602
API 603
API 607
API 608
API 589
API 553
API 610
Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services
API 611
General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services
API 612
Special-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services
API 613
Special-Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services
API 614
API 616
Lubrication, Shaft-Sealing, and Control-oil Systems and Auxiliaries for Petroleum, Chemica
Gas Turbines for Petroleum, Chemical, and Gas Industry Services
API 617
API 618
API 619
Rotary Type Positive Displacement Compressors for Petroleum, Chemical, and Gas Industr
API 671
API 672
API 674
API 675
API 676
Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas
Positive Displacement Pumps- Reciprocating
Positive Displacement Pumps- Controlled Volume
Positive Displacement Pumps- Rotary
API 677
API 682
API 11L
API 11PGT
API 11S4
General Purpose Gear Units for Petroleum, Chemical, and Gas Industry Service
Shaft Sealing System for Centrifugal and Rotary Pumps
Design Calculations for Sucker Rod Pumping Systems
Packaged Combustion Gas Turbines
Sizing and Selection of Electric Submersible Pump Installations
API 11V6
API 11E
API 11N
Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves
Well Pumping Units
Lease Automatic Custody Transfer (LACT) Equipment
API 660
API 661
API 662
Heat Exchangers
Shell-and-Tube Heat Exchangers for General Refinery Services
Air Cooled Heat Exchangers for General Refinery Services
Plate Heat Exchangers for General Refinery Services
Material
API 936
API 939
API 941
API 945
Steels for Hydrogen Service at Elevated Temperatures and Pressure in Petroleum Refineries
Avoiding Environmental Cracking in Amine Units
API 959
API 11S3
API 500
API 505
API 540
GEN
Interpretations 1986
Interpretations 1992
Interpretations 1993
Interpretations 1995
ASME Y32.11 Graphical Symbols for Process Flow Diagrams
GEN
Detection and Prevention of Sand Erosion of Production Equipment
API 11N
Lease Automatic Custody Transfer (LACT) Equipment
Catalogue List of API Publications
British Standards
BS EN 837-1Pressure Gauges - Bourdon Tube PG
BS EN 12504-1
Testing Concrete in Structures - Part 1
BS EN 1435Non-destructive Examination of Welds - Radiographic
BS 2573-1 Rules for the Design of Cranes - Part 1
BS 2742
Use of the Ringelmann and Miniature Smoke Charts
BS 3676-1 Switches for Household and Similar Fixed Electrical Installations
BS 4483
Steel fabric for the Reinforcement of Concrete
BS EN 558-1Industrial Valves- face-to-face Dimensions of Metal valves for use in Flanged Pipe System P
BS EN 558-2Industrial Valves- face-to-face Dimensions of Metal valves for use in Flanged Pipe System P
BS 8666
Specification for Scheduling, Dimensioning, Bending and Cutting of Steel Reinforcement fo
BS EN ISO 4066
Construction Drawings - Bar Scheduling
1986
1992
1993
1995
Mar 1976
IV Edition, Nov 1994
2003
1998
2000
1997
1983
1969
1989
1998
1996
1996
2000
2000
Sr. No.
1
2
3
4
5
6
API No.
Catalogue
API 1102
API 1104
API 1107
API 1110
API 2000
API 2001
7
8
API 2009
API 2015
9
10
11
12
13
API 2021A
API 2200
API 2201
API 2350
API 2510
14
API 2510A
15
API 2610
16
API 510
17
API 520Pt1
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
API 520Pt2
API 521
API 526
API 527
API 530
API 531
API 534
API 535
API 560
API 570
API 572
API 573
API 574
API 575
API 576
33
34
35
36
37
38
39
40
41
API 578
API 579
API 581
API 589
API 590
API 591
API 594
API 598
API 599
42
API 600
43
44
45
46
47
API 602
API 603
API 607
API 608
API 609
48
API 610
49
API 611
50
API 612
51
API 613
52
53
API 614
API 616
54
API 617
55
API 618
56
API 619
57
58
59
60
61
62
63
API 620
API 650
API 651
API 652
API 653
API 660
API 661
64
API 670
65
API 671
66
67
68
69
API 672
API 674
API 675
API 676
70
71
API 677
API 682
72
API 683
73
API 850
74
75
API 910
API 920
76
API 936
77
API 939
78
79
API 941
API 945
80
81
82
83
84
API 959
85
API 11S3
86
87
API 14B
API 15HR
88
89
API 500
API 540
90
91
92
93
94
API 5B
API 6D
API 11L
API 11PGT
API 11S4
95
96
API 11V6
API 14C
97
98
99
API 14E
API 14J
API 2021
100
101
102
103
104
104
105
API 505
API 553
API 11E
API 11N
API 91-62
API 662
GEN
105
GEN
Sr. No.
1
2
3
4
5
6
7
8
BS No.
BS EN 837-1
BS EN 12504-1
BS EN 1435
BS 2573-1
BS 2742
BS 3676-1
BS 4483
BS EN 558-1
BS EN 558-2
10
11
BS 8666
BS EN ISO 4066
Title
List of API Publications
Steel Pipeline Crossing Railroads and Highways
Welding of Pipelines and Related Facilities
Pipeline Maintenance Welding Practices
Pressure Testing of Liquid Petroleum Pipelines
Venting Atmospheric and Low-Pressure Storage Tanks
Fire Protection in Refineries
Edition, Year
2003
VI Edition, Apr 1993
IX Edition, Sep 1999
III Edition, Apr 1991
IV Edition, Mar 1997
V Edition, Apr 1998
VII Edition, Jun 1998
Safe Welding, Cutting, and Other Hot Work Practices in Refineries, GasVI
Plants,
Edition,
and
Sep
Petrochemical
1995
Plants
Safe Entry and Cleaning of Petroleum Storage Tanks
V Edition, May 1994
Interim Study-Prevention and Suppression of Fires in Large Aboveground
I Edition,
Atmospheric
Jul 1998 Storage Tanks
Repairing Crude Oil, LPG, and Product Pipelines
III Edition, May 1994
Procedures for Welding or Hot Tapping of Equipment in Service
IV Edition, Sep 1995
Overfill Protection for Storage Tanks in Petroleum Facilities
II Edition, Jan 1996
Design and Construction of LPG Installations
VII Edition, May 1995
Fire-Protection Considerations for the Design and Operation of LPG Storage
II Edition,
Facilities
Dec 1996
Design, Construction, Operation, Maintenance, and Inspection of Terminal
I Edition,
& Tank
JulFacilities
1994
Pressure Vessel Inspection Code: Maintenance Inspection, Rating, repair,
VIII and
Edition,
Alteration
Dec 1998
Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
VI Edition,
PartMar
I- Sizing
1993 and Selection
Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
IV Edition,
PartDec
II- Installation
1994
Guide for Pressure-Relieving and Depressuring Systems
IV Edition, Mar 1997
Flanged Steel Pressure Relief Valves
IV Edition, Jun 1995
Seat Tightness of Pressure Relief Valves
III Edition, Jul 1991
Calculation of Heater Tube Thickness in Petroleum Refineries
IV Edition, Oct 1996
Measurement of Noise from Fired Process Heaters
I Edition, Mar 1980
Heat Recovery Steam Generators
I Edition, Jan 1995
Burners for Fired Heaters in General Refinery Services
I Edition, Jul 1995
Fired Heaters for General Refinery Services
II Edition, Sep 1995
Piping Inspection Code
II Edition, Oct 1998
Inspection of Pressure Vessels
I Edition, Feb 1992
Inspection of Fired Boilers and Heaters
I Edition, Oct 1991
Inspection Practices for Piping System Components
II Edition, Jun 1998
Inspection of Atmospheric and Low-Pressure Storage Tanks
I Edition, Nov 1995
Inspection of Pressure-Relieving Devices
I Edition, Sep 1992
Material Verification Program for New and Existing Alloy Piping SystemI Edition, May 1999
Fitness-for-Service
I Edition, Jan 2000
Risk-Based Inspection Base Resource Document
I Edition, May 2000
Fire test for Evaluation of valve Stem Packing
II Edition, Jul 1998
Steel Line Blanks
I Edition, Mar 1985
User Acceptance of Refinery Valves
II Edition, Feb 1998
Check valves: Wafer, Wafer-Lug, and Double flanged Type
V Edition, Nov 1997
Valve Inspection and Testing
VII Edition, Oct 1996
Metal Plug valves-Flanged and Welding Ends
IV Edition, Nov 1994
Steel Gate Valves-Flanged and Butt-Welding Ends, Bolted and PressureXSeal
Edition,
Bonnets
Feb 1997
Title
Pressure Gauges - Bourdon Tube PG
Testing Concrete in Structures - Part 1
Non-destructive Examination of Welds - Radiographic
Rules for the Design of Cranes - Part 1
Use of the Ringelmann and Miniature Smoke Charts
Switches for Household and Similar Fixed Electrical Installations
Steel fabric for the Reinforcement of Concrete
Mar 1976
Year
1998
1997
1969
1998
Industrial Valves- face-to-face Dimensions of Metal valves for use in Flanged Pipe System Part -1