Codes
Codes
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
GENERAL
SAFETY
VESSELS - TANKS
HEAT TRANSFER EQUIPMENT
ROTATING EQUIPMENT
PROCESS EQUIPMENT
MATERIAL HANDLING
GENERAL SERVICES
PLANT SERVICES
BUILDING SERVICES
PLUMBING
PIPING
MISCELLANEOUS MATERIAL, WELDING, ETC.
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
ANSI
API
ASME
ASHRAE
AWWA
CEMA
CGSB
CSA
CTI
HYDRAULICS INSTITUTE
MSS
NACE
NEMA
NFPA
PFI
RMA
SSPC
TEMA
ULC
ISA
ISO
OFFSHORE PIPELINE
UNITS OF MEASUREMENT
------------------------------------------------------------
1.0
1.1
AGS
Safety
Vessels - Tanks
Rotating Equipment
Process Equipment
Material Handling
General Services
Scientific Apparatus Makers Association
Plant Services
Building Services
Plumbing
Piping
ANSI
API
Publ. 941 Steel for Hydrogen Service at Elevated Temperature and Pressures in
Petroleum Refineries and Petrochemical Plants
Publ. 2009 Safe Welding and Cutting Practices in Refineries
Publ. 2015 Safe Entry and Cleaning of Petroleum Storage Tanks
Publ. 2021 Fighting Fires In and Around Flammable and Combustible Liquid
Atmosphere Storage Tanks
Publ. 2030 Guidelines for Applications of Water Spray Systems for Fire Protection in
the Petroleum Industry
Publ. 2517 Evaporation Loss from External Floating-Roof Tanks
Publ. 2557 Vapour Collection and Control Options for Storage and Transfer
Operations in the Petroleum Industry
RP 14C Analysis, Design, Installation and Testing of Basic Surface Safety Systems
on Offshore Platforms
RP 14F Design and Installation of Offshore Platforms
RP 14G Fire Prevention and Control on Open Type Offshore Production Platforms
RP 30 Calculation for Heater Tube Thickness in Petroleum Refineries
RP 500 Recommended Practice for Classification of Locations for Electrical
Installations at Petroleum Facilities
RP 520 Sizing, Selection, and Installation of Pressure Delivery Devices in
Refineries. Parts 1 and 2
RP 521 Guide for Pressure Delivery and Depressuring Systems
RP 526 Flanged Steel Safety Relief Valves
RP 551 Process Measurement Instrumentation
RP 560 Fired Heater for General Refinery Services
RP 651 Cathodic Protection of Aboveground Petroleum Storage Tanks
RP 652 Lining of Aboveground Storage Tank Bottoms
RP 682 Shaft Sealing System for Centrifugal and Rotary Pumps
RP 1110 Pressure Testing of Liquid Petroleum Pipelines
RP 2001 Fire Protection in Refineries
RP 2003 Protection Against Ignitions Arising out of Static, Lighting and Stray
Currents
Spec. 5L Line Pipe
Spec. 6D Pipeline Valves
Spec. 6FA Fire Test for Valves
Spec. 12D Field Welded Tanks for Storage of Production Liquids
Spec. 12F Shop Welded Tanks for Storage of Production Liquids
Spec. 12J Oil and Gas Separators
Spec. 12K Indirect Type Oil Field Heaters
Spec. 12L Specification for Vertical and Horizontal Emulsion Treaters
Spec. 12P Specification for Fibreglass Reinforced Plastic Tanks
Std. 510 Pressure Vessel Inspection Code
Std. 526 Flanged Steel Safety - Relief Valves
Std. 527 Seat Tightness of Pressure Relief Valves
Std. 594 Wafer and Wafer-Lug Check Valves
Std. 598 Valve Inspection and Testing
Std. 599 Metal Plug Valves - Flanged and Butt-Welding Ends
Std. 600 Steel Gate Valves - Flanged and Butt-Welding Ends
Std. 602 Compact Steel Gate Valves - Flanged Threaded, Welding, and ExtendedBody Ends
Std. 603 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
Std. 607 Fire Test for Soft-Seated Quarter-Turn Valves
Std. 608 Metal Ball Valves - Flanged and Butt-Welding Ends
Std. 609 Lug - and Wafer - Type Butterfly Valves
Std. 610 Centrifugal Pumps For Petroleum, Heavy Duty Chemical and Gas Industry
Services
Std. 611 General Purpose Steam Turbines for Refinery Services
Std. 612 Special Purpose Steam Turbines for Refinery Services
Std. 613 Special Purpose Gear Units for Refinery Services
Std. 614 Lubrication, Shaft-Sealing and Control Oil Systems for Special Purpose
Application
Std. 615 Sound Control of Mechanical Equipment for Refinery Services
Std. 616 Gas Turbines for Refinery Services
Std. 617 Centrifugal Compressors for General Refinery Services
Std. 618 Reciprocating Compressors for General Refinery Services
Std. 619 Rotary-Type Positive Displacement Compressors for General Refinery
Services
Std. 620 Design and Construction of Large, Welded, Low Pressure Storage Tanks
Std. 630 Tube and Header Dimensions for Fired Heaters for Refinery Service
Std. 650 Welded Steel Tanks for Oil Storage
Std. 660 Heat Exchangers for General Refinery Service
Std. 661 Air-Cooled Heat Exchangers for General Refinery Service
Std. 670 Vibrations, Axial Position, and Bearing-Temperature Monitoring System
Std. 671 Special Purpose Coupling for Refinery Service
Std. 674 Positive Displacement Pumps - Reciprocating
Std. 675 Positive Displacement Pumps - Controlled Volume
Std. 676 Positive Displacement Pumps - Rotary
Std. 677 General Purpose Gear Units for Refineries Services
Std. 678 Accelerometer-Base Vibration Monitoring System
Std. 1104 Welding Pipelines and Related Facilities
Std. 2000 Venting Atmospheric and Low-Pressure Storage Tanks - Non-Refrigerated
and Refrigerated
Std. 2530 Measurement Standard Chapter 14, Natural Gas
2.3
ASME
1
2
4.1
8.2
9
10
22
General Instructions
Definitions and Values
Steam Generating Units
Centrifugal Pumps
Displacement Compressors, Vacuum Pumps and Blowers
Compressors and Exhausters
Gas Turbine Power Plants
ASHRAE
ASHRAE Handbooks
2.5
AWWA
C110 Gray-Iron and Ductile Iron Fittings, 3 in. through 48 in. for Water and Other
Liquids
C151 Ductile Iron Pipe, Centrifugally Cast in Metal Molds or Sand-Lined Molds for
Water and Other Liquids
E101-88 Vertical Turbine Pumps - Live Shaft and Submersible Types
C502 Dry Barrel Hydrants Fire Hydrants
2.6
CEMA
CGSB
CSA
Boilers and Pressure Vessels
CTI
STD-103 Standard Specifications for the Design of Cooling Tower Structures with
Redwood Lumber
STD-111 Gear Speed Reducers
STD-114 Standard Specifications for the Design of Cooling Tower Structures with
Douglas Fir Lumber
NCL-109 Nomenclature for Industrial Water - Cooling Towers
WMS-112 Pressure Preservative Treatment of Lumber for Industrial Water - Cooling
Towers
ATC-105 Acceptable Test Code for Water-Cooling Towers
2.10
Hydraulics Institute
NACE
MR-01-90 Sulfide Stress Cracking Resistant Metallic Material for Oil Field Equipment
RP-01-78 Design, Fabrication and Surface Finish of Metal Tanks and Vessels to be
Lined for Chemical Immersion Service
RP-0188-88 Discontinuity (Holiday) Testing of Protective Coatings
2.13
NEMA
SM23-1979
2.14
11
11A
12
12A
12B
13
14
15
16
17
20
22
24
25
37
51
54
CUA
59
59A
82
214
291
655
NFPA
Low Expansion Foam Systems
Medium and High Expansion Foam Systems
Carbon Dioxide Extinguishing Systems
Halon 1301 Fire Extinguishing Systems
Halon 1211 Fire Extinguishing Systems
Installation of Sprinkler Systems
Stand Pipe and Hose Systems
Water Spray Fixed Systems
Deluge Foam-Water Sprinkler and Spray Systems
Dry Chemical Extinguishing Systems
Centrifugal Fire Pumps
Water Tanks for Private Fire Protection
Installation of Private Fire Service Mains and Their Appurtenances
Water Based Fire Protection Systems
Stationary Combustion Engines and Gas Turbines
Oxygen-Fuel Gas Systems for Welding
National Fuel Gas Code
58 LP Gas Storage, Use
LP Gases at Utility Gas Plants
Storage and Handling of Liquefied Natural Gas
Incinerators, Waste and Linen Handling Systems and Equipment
Water Cooling Towers
Fire Flow Testing and Marking of Hydrants
Prevention of Sulphur Fires and Explosions
2.15
ES
ES
ES
ES
ES
PFI
2.16
RMA
SSPC
Shop, Field and Maintenance Painting
Solvent Cleaning
White Metal Blast Cleaning
Commercial Blast Cleaning
Brush-Off Blast Cleaning
Pickling
Near-White Blast Cleaning
Guide to Vis1
2.18
TEMA
TEMA Standard
2.19
ULC
S603M Standard for Shop Fabricated Steel Underground Tanks for Flammable and
Combustible Liquids
S630M Standard for Shop Fabricated Steel Aboveground Tanks for Flammable and
Combustible Liquids
2.20
85.1
ISA
Instrument Symbols and Identification
2.21
5167
ISO
Sizing of Metering Orifice
2.22
DNV
Offshore Pipeline
Rules for Submarine Pipeline Systems
2.23
ISO 1000
Units of Measurement
SI Units