Mining Truck

T 284
Gross Vehicle Weight (GVW): 600 t / 661 ton
Nominal payload:
363 t / 400 ton
Empty Vehicle Weight (EVW): 237 t / 261 ton

T 284
Gross Vehicle Weight (GVW): 600 t / 661 ton
Nominal payload:

363 t / 400 ton

Empty Vehicle Weight (EVW): 237 t / 261 ton

T 284

Productivity

Customer Support

Liebherr Mining Equipment enables superior productivity

by loading and hauling maximum tonnage in the shortest
amount of time.

Liebherr builds more than just mining equipment; Liebherr

also builds customer partnerships.

Efciency

Safety

Liebherr combines the proven capabilities of previous

models with new features that improve operational
efciency.

Mining demands an ever-vigilant focus on safety, and

Liebherr strictly adheres to industry standards. Liebherr
equipment is designed to diminish risk even under the
most extreme mining conditions.

Reliability

Environment

To maximize equipment reliability, Liebherr combines

manufacturing expertise with superior monitoring and
diagnostic capabilities.

Liebherr optimizes mining equipment for fuel economy,

emission compliance, and extended service intervals.

T 284

Multiple loading tools

Liebherr mining trucks are designed to
match large electric shovels and wheel
loaders. The T 284 is suited for both the
Liebherr R 9800 and the R 996 B hydraulic
excavator. This combination of machines
makes for a complete Liebherr solution.

T 284

Productivity
By maximizing payload while minimizing cycle time, Liebherr high-horsepower
equipment moves more tons per hour.

Largest payload
Ultra class trucks have proven to be a more productive means of moving material.
As the designer and manufacturer of the rst 400 ton (363 t) mining truck, Liebherr
has been at the forefront of this successful industry solution. By hauling more per
cycle, the T 284 allows Customers to maximize the return on their investment and
to meet production targets with fewer trucks or in less time.

Unmatched performance
The combination of the T 284s efcient Litronic Plus AC drive system, its highpower (up to 3,000 kW / 4,023 HP) engine, and low gross vehicle weight leads
to fast haul cycle times with higher speeds on grade if compared to other trucks
in its class.

Flexible engine options

The T 284 supports multiple engine options with power ratings up to 3,000 kW
(4,023 HP). With application-specic recommendations from Liebherr, Customers
are able to select the engine that will allow the truck to meet productivity targets
while minimizing fuel consumption.

Drivability
Liebherr is committed to designing mining trucks that operators want to drive.
The T 284 fullls this commitment and promotes driver efciency with its superior
comfort, acceleration and handling.

Lightweight design
Liebherrs trademark low EVW is
achieved by utilizing an electric drive
system combined with a lightweight
frame. Hauling the largest available
payload with a lighter truck maximizes
Customer productivity.

T 284

Wheel motors
The T 284s AC induction motors efciently
convert electrical power into mechanical
torque. Fewer electrical losses translate
into higher rimpull forces for faster cycle
times and increased fuel economy.

T 284

Efciency
Efciency is a key ingredient for a successful mining operation. Liebherr mining
equipment enables Customers to enjoy unrivaled performance while reducing
cost per ton.

Litronic Plus technology

Developed and built by Liebherr, the proven Litronic Plus drive system determines
the optimal way to extract power from the diesel engine. Efcient loading of the
engine is critical to minimize fuel consumption and maximize performance.

Intelligent power usage

Engine power usage is optimized by running auxiliary components such as
pumps, fans and motors only when needed. Fuel is conserved when the engine
is idling and more power is available to accelerate the truck and climb grades
when necessary.

Long life components

Components are built to perform in the most extreme mining conditions in order
to allow more time between overhauls and to reach their maximum operational life.

Engine / Fuel system

The T 284 offers reliable engine options
with the latest fuel injection technology
for cleaner combustion and reduced
fuel consumption. Customers can
expect reduced maintenance and lower
fuel costs.

T 284

Frame
The T 284s frame is designed according to
international weld fatigue guidelines, and
is fabricated according to American Welding Society standards. This steel structure
includes cast components in strategic
areas and hollow box rails with fully welded
internal stiffeners. These choices ensure a
durable, lightweight frame.

T 284

Reliability
Liebherr draws upon a wealth of experience while incorporating new technologies
into its products to provide Customers with high quality equipment and services.

Experience
Millions of operating hours and years of design experience have come together
to create the Liebherr T 284. With a history of products with proven reliability in
the harshest mining environments, Liebherr Customers can count on consistent
performance.

Advanced engineering tools

Liebherrs structural design process includes advanced software tools to ensure
that the T 284 will perform reliably under the most demanding operating conditions.
Some of the tools include:

Multi-body Dynamic Simulations

3D modeling
Finite Element Analysis (FEA)
Structural Fatigue Life prediction software

Diagnostics
The integrated electronic system monitors, records, and outputs vital truck health
and performance data. Data is stored and available for download to perform
detailed analysis. This system supports predictive maintenance strategies to
minimize unscheduled downtime.
Truck data is readily available to eet dispatch or monitoring systems through a
dedicated port using open communication protocols. This allows Customers the
exibility to choose systems which support their maintenance, operations, and
business process requirements.

Integrated dash display

The monitoring system includes an onboard
30 cm (12) touch-screen display. Intuitive menus
and user-friendly screens provide operators and
technicians with real-time truck information.
In addition to the standard operator screen,
password protected diagnostic screens display
live data such as temperatures and pressures for
detailed troubleshooting.

T 284

Extended component life

Liebherr Mining exchange components enable
Customers to minimize the total lifecycle cost
of owning and operating a Liebherr mining
truck or excavator while maintaining peak
productivity and reliability.
All exchange components are built to OEM
standards, offering same-as-new warranties.

10

T 284

Customer Support
Liebherr is committed to maintaining a full life cycle service organization as well as a
global parts warehousing and remanufacturing network.

Product support
Liebherr product support provides the vital interface between the Customer and
the OEM. There are different levels of product support available:

Assembly
Maintenance advice
Troubleshooting assistance
Technical expertise

Product support personnel work with Customers from the assembly of a truck
throughout its operating life.

Product upgrade programs

Liebherr offers component and system upgrades as advances in technology,
innovation in design, and manufacturing improvements become available. The
product upgrades can improve performance, reliability and safety.

Parts support and logistics

Liebherr forecasts parts requirements on a global basis and optimizes inventories
to meet Customers needs. A 24/7 on-call service is available to ensure prompt
response.

Training
The Liebherr Mining Training System provides
operator and eld service technicians with
world-class operational and technical training.
Operator training
Basic and advanced service technician training
Hands-on troubleshooting training

T 284

11

Stability and control

The advanced Traction Control System with
four-wheel speed sensing capability automatically adjusts torque to the rear wheels
to maximize traction when cornering, accelerating from a standstill, or traveling down
wet or icy roads.
Developed by Liebherr exclusively for mining
trucks, this system enables operators to
consistently maintain steering control and
truck stability.

12

T 284

Safety
Liebherr designs and builds safety into every piece of mining equipment, and is
committed to providing a safe and healthy working environment for the operator and
service personnel.

Operator safety
The T 284 cab is designed to be a safe, comfortable and productive environment
for operators. The cab provides maximum visibility and is certied for roll-over and
falling-object protection. All Liebherr trucks offer at least two safety routes from the
cab to the ground.

Service personnel safety

Liebherr mining trucks are equipped with ladders and walkways that allow easy
engine access. The low working heights of maintenance areas provide safe and
efcient service access.

Access to the engine and alternator from both sides of the chassis
Ground level lling points for fuel, hydraulic oil, grease and coolant
Hydraulic lters and battery isolation box accessible from ground level
Dual access into axle box for maintenance and inspection
Tie offs for safety harnesses
Centralized access to all cab electrical connections
from the superstructure oor

Operational safety
In order to maintain a safe working environment, the T 284 offers the following
features.

Payload overload warnings

Anti-roll back feature active in forward and reverse
Certied steering and braking accumulators
High visibility LED running and service lights
Emergency stop buttons in cab and at ground level

Operator assist features (optional)

FRONT

LEFT

Vision system provides the additional viewing

angles around the truck to eliminate blind spots

RIGHT

Detection system alerts the operator when an

object is in close proximity to the stationary truck
Fatigue system provides real-time monitoring of
the operator for fatigue and distraction events
while the truck is in motion.

REAR

T 284

13

Fewer carbon-based consumables

The T 284 uses fewer consumables
compared to similar class trucks. It
requires less service time and reduces
the costs of handling and disposing of
waste.

14

T 284

Environment
In order to minimize the impact on the environment, Liebherr designs and builds
mining equipment with the smallest possible environmental footprint.

Low emissions
By partnering with the leading providers of high speed diesel engines, Liebherr is
able to offer engine options for the T 284 with the latest emission technology to
satisfy US EPA emissions requirements.

Fuel efciency
Liebherrs Litronic Plus drive system paired with the latest engine technology
provides excellent fuel economy. Lowering the fuel consumption of the truck eet
can signicantly reduce the carbon footprint of the entire operation.

Component exchange
The Liebherr exchange program extends component life cycles. The program
employs condition-based replacements that reduce unplanned maintenance.
Liebherr also reduces waste by overhauling components using original core parts.

Sound solutions
Factory engineered quiet-truck packages featuring a low speed engine fan,
enclosed engine bay, and custom mufers drastically reduce the truck noise
emissions. Day or night, this ultra quiet truck gives Customers the exibility to run
their operations without disturbing nearby residential areas.

Tire life
Liebherrs independent, double A-Arm front
suspensions minimize lateral tire forces by
maintaining contact with the ground over
uneven roads or while turning the truck.
Optimized for reduced wear when the truck
is driving loaded, this suspension arrangement is designed to get the most useful life
out of each tire.

T 284

15

Technical Data
Engine

Model ______________________________ MTU 20V4000 C23 Tier 2*

Gross horsepower @
1,800 rpm**_______________________ 3,000 kW / 4,023 HP***
No. of cylinders ________________ 20
Displacement ___________________ 95.4 l / 5,822 in3
Wet weight _______________________ 12,020 kg / 26,500 lb
Crankcase _______________________ 335 l / 88 gal
Cooling system ________________ 1,060 l / 280 gal
* Standard engine setting is USA/EPA Tier 2 compliant in emission-optimized (EO)
mode. Fuel-optimized (FO) mode is optional for non-emission regulated countries
** _Gross power definition according to ISO 3046 (ratings also correspond to
SAE J 1995 standard conditions)
*** Optional 2.800 kW / 3,750 HP engine power setting. Consult factory for additional
reduced engine power settings.

Model ______________________________ MTU 20V4000 C22 Tier 1*

Gross horsepower @
1,800 rpm**_______________________ 2,720 kW / 3,648 HP
No. of cylinders ________________ 20
Displacement ___________________ 90 l / 5,490 in
Wet weight _______________________ 10,480 kg / 23,100 lb
Crankcase _______________________ 390 l / 103 gal
Cooling system ________________ 870 l / 230 gal
* Standard engine setting is USA/EPA Tier 1 compliant.
** _Gross power definition according to ISO 3046 (ratings also correspond to
SAE J 1995 standard conditions)

Model ______________________________ Cummins QSK 78

Gross horsepower @
1,900 rpm* ________________________ 2,610 kW / 3,500 HP
No. of cylinders ________________ 18
Displacement ___________________ 78 l / 4,735 in3
Wet weight _______________________ 11,300 kg / 24,912 lb
Crankcase _______________________ 295 l / 78 gal
Cooling system ________________ 721 l / 191 gal
* Gross power definition according to SAE J 1995 standard conditions

Electric Drive System

Control System Liebherr Litronic Plus AC drive system with
IGBT technology
Control box Liquid cooled power components,
pressurized cabinet
Main alternator AC brushless, direct drive, forced air
cooling
Wheel motors Litronic Plus AC induction motors, forced
air cooling
Maximum speed* 54 km/h / 34 mph (with 43.7:1 gear ratio)
64 km/h / 40 mph (with 37.33:1 gear ratio)
45 km/h / 28 mph (with 53.33:1 gear ratio)
Cooling system Variable speed AC motor with twin impeller
radial cooling fans
* consult factory for proper selection of gear ratio based on site requirements

16

T 284

Braking Systems
Electric dynamic braking, forced air over quiet stainless steel resistor
grids with dry disc service and secondary braking system.
Electric dynamic braking Max: 4,500 kW / 6,035 HP
Full dynamic braking down to zero. Single
pedal automatic brake blending with
service brakes below 1 km/hr.
Dynamic braking
speed control Operator adjustable, automatically limits
truck speed on downhill grade when set
Adjustable speed limits Automatic speed limits for empty and loaded truck adjustable for site requirements
Traction control Litronic Plus traction control system.
computer controlled in propel and dynamic
braking, forward and reverse, all-wheel
speed sensing
Service brakes front Single disc, wheel speed, five calipers per
wheel
Service brakes rear Dual discs per side, one caliper per disc,
armature speed
Hydraulic accumulators 2 x 7.6 l / 2 gal, separate isolated accumulator for front and rear axle (piston type)
Park brakes Spring applied, pressure released, one
caliper per each rear disc
Filtration Cleanliness level ISO 15/13/11

Steering
Ackermann center point lever system, full hydraulic power steering
with accumulator safety backup. Isolated from dump hydraulic system.
Two double-acting hydraulic cylinders.
Hydraulic accumulator 170 l / 45 gal (piston type)
Filtration Cleanliness level ISO 15/13/11
Turning radius (ISO 7457)
Tire centerline 17.2 m / 56' 5"
Vehicle clearance radius 19.95 m / 65' 5"

Dump System
Two double-stage, double-acting hoist cylinders with inter-stage and
end cushioning in both directions. Electronic joystick with integrated
engine high-idle switch and full modulating control in both extend and
retract.
Dump angle 49 (45 with optional kick-out switch)
Cycle times 56 secs
Remote dump Quick disconnects for external power
dumping (buddy dump) accessible from
ground level
Filtration High pressure and return line filtration.
Cleanliness level ISO 18/16/13

Technical Data
Suspensions System

Front _______________________________ Double A-Arm with inclined king pin pivot,

spindle and nitrogen over oil suspensions
with integral damping
Rear ________________________________ Three bar linkage comprised of triangular
upper link plus two bottom drag links and
nitrogen over oil suspensions with integral
damping

Weights

Payload ____________________________ 363 t / 400 ton

Gross Vehicle Weight (GVW)_ 600 t / 661 ton
Chassis weight * ________________ 198 t / 218 ton
Body weight _____________________ Custom for each mine
Weight distribution _____________ Empty front 50 % / rear 50 %
Loaded front 33 % / rear 67 %
Empty Vehicle Weight _________ 237 t / 261 ton
* Standard truck (less options), 100% fluids (fuel tanks, hydraulic tank, gears,
suspensions, crankcase, coolant, grease and charged accumulators)

Tires
Tires 56/80 R63
59/80 R63*
* 44" rims only except Bridgestone which can operate on 41" rims as well

Frame
Design Closed box structure with multiple torque
tube cross members, internal stiffeners and
integrated front bumper. High strength
steel castings are used in high stress areas.
Welding Frame girders welded inside and out with
ultrasonic inspection aligned with AWS
D1.1

Cab
Deluxe cab with integrated ROPS, FOPS, and double wall design for
optimum insulation. Fully adjustable air suspension operator seat with
double lumbar support and full-size second seat for training requirements. Operator comfort controls include a tilt and telescoping steering
wheel, heater, defroster and standard AC. Real-time vital truck
information is easily displayed to the operator and also recorded for
download.

Fluid Capacities
Fuel Tank 5,351 l / 1,414 gal
Hydraulic dump circuit
- Tank 1,302 l / 344 gal
- System 1,514 l / 400 gal
Hydraulic brake and steering
- Tank 924 l / 244 gal
- System 1,060 l / 280 gal
Planetary gear sets,
each (2) 280 l / 74 gal
Front wheels, each (2) 60 l / 16 gal
Grease tank 54 kg / 120 lb

Body
Body sizes are custom designed to fit Customer requirements and
specific applications. Please contact factory for options.

Sound
Interior cab noise level
(per ISO 6394:2008) __________ 75 dB(A) sound pressure
Exterior noise emission
(per ISO 6393:2008)___________ 126 dB(A) sound power

T 284

17

Technical Data
Dimensions

Q
L
J
B
A

T284

T284

D
E

Dimensions
A
B
C
D
E
F
G

18

Outside Body Width

Overall Truck Width
Bumper Ground Clearance
Centerline Front Tire Width
Overall Tire Width
Centerline Rear Dual Width
Rear Axle Clearance

T 284

mm/ft in
8,891 mm / 29' 2"
9,679 mm / 31' 8"
1,240 mm / 4' 0"
7,290 mm / 24' 0"
8,715 mm / 28' 7"
3,909 mm / 12'10"
1,057 mm / 3' 6"

Dimensions
H
I
J
K
L
M

Front Canopy Height

Overall Truck Length
Wheelbase
Loading Height
Dump Clearance
Body Raised Height

mm/ft in
8,294 mm / 27'
15,690 mm / 51'
6,553 mm / 21'
7,425 mm / 24'
1,249 mm / 4'
15,050 mm / 49'

2"
5"
5"
4"
1"
4"

Performance Curves

1300

600

EVW

300

22

GVW

21
20
19

260

Rimpull

1400

1350

1300

1250

1200

500
1150

1100

100

1050

950

400
900

850

800

750

300
700

650

23

320

280

1000

lb

24

1200
1100

kg

18

240

17

16

220

900

200

800

180

700

160

15
14

13
12

600
500

11
10

140

120

100

400

80

300
200
100

Percent effective grade

1400

600

340

550

1500

200

360

500

Lbf x 1000

1600

450

kN

Gross Vehicle Weight x 1000

60

40

3
2

20

0
0

10

12

15

20

16

25

20

30

24

35

40

28

45

32

50

36

55

60

40

65

40

70

48

75

mph

80

km/h

Speed

Performance Chart Parameters

Gross Power 2,800 kW / 3,755 HP (A)
3,000 kW / 4,023 HP (B)
Net Power 2,614 kW / 3,505 HP (A)
2,814 kW / 3,774 HP (B)
Tire size 59.80 R63
Gear ratio 43.7 to 1
Reference curves A: Propulsion 2,800 kW / 3,755 HP
B: Propulsion 3,000 kW / 4,023 HP
C: Dynamic Braking (Retard)

Note
The propulsion curve is calculated using net horsepower, therefore site
specific and climatic variables will have an effect on the parasitic loss
estimations.

EVW: Empty Vehicle Weight

GVW: Gross Vehicle Weight

T 284

19

Loading Charts
m

ft

20
18
16

60
50

14
12
10

T 284 mining truck loaded by the Liebherr R 996 B

hydraulic excavator in face shovel configuration
Maximum dump height
Truck loading height
Passes to fill
(given a 1.8 t/m3 density at
95 % bucket fill factor)

12.9 m/42'3"
7.4 m/24'4"

6 passes

40

30

8
6
4

20
10

2
0

-2
-10
-4
m 0

4
10

ft 0

20

10
30

12

14

40

16
50

18

-6

60

ft

18

60

16

50

14
12
10
8
6
4
2
0
-2
-4
-6
-8
m 0
ft 0

20

T 284

4
10

6
20

10
30

12 14 16
40

50

18 20 22 24
60

80

40
30
20
10
0
-10
-20

T 284 mining truck loaded by the Liebherr R 996 B

hydraulic excavator in backhoe configuration
Maximum dump height
Truck loading height
Passes to fill
(given a 1.8 t/m3 density at
95 % bucket fill factor)

10.7 m/34'11"
7.4 m/24' 4"

6 passes

Loading Charts
ft
70

m
22

T 284 mining truck loaded by the Liebherr R 9800

hydraulic excavator in face shovel configuration

20
60
50

Maximum dump height

Truck loading height
Passes to fill
(given a 1.8 t/m3 density at
95 % bucket fill factor)

18
16
14

40
30

13 m/42'6"
7.4 m/24'4"

5 passes

12
10
8

20
10
0
-10

6
4
2
0
-2
-4
20

18
60

ft

60

18

50

16
50

14

12

10

40

30

20

0 m

2
10

0 ft

T 284 mining truck loaded by the Liebherr R 9800

hydraulic excavator in backhoe configuration

16

Maximum dump height

Truck loading height
Passes to fill
(given a 1.8 t/m3 density at
95 % bucket fill factor)

14
40
30
20
10
0
-10
-20
-30

12
10

5 passes

8
6
4
2
0
-2
-4
-6
-8
-10
24 22 20 18 16 14 12 10
80

10.9 m/35'9"
7.4 m/24'4"

70

60

50

40

30

6
20

2
10

0 m
0 ft

T 284

21

Standard Equipment
Standard Equipment
Engine
Air cleaner dust ejectors automatic
Air cleaners two units with 2 elements per unit with electronic
restriction monitoring in cab
Engine roll over protection switch
Exhaust side-mounted mufflers with insulated exhaust pipes
Fan clutch variable speed, temperature controlled
Fuel/water separator
Multi-point exhaust temperature monitoring system (ETMS)
Oil centrifuge filter
Prelube pre-start engine oil pressurization to reduce dry
engine turnover
Primary and secondary fuel filters
Radiator L&M (Mesabi) flexible core, w/side mounted header
tank level gauge
Roll out power module radiator, engine and main alternator
mounted on roll out sub frame
Starter electric
Turbo thermal protection
24 V Electrical
Batteries 6 x 12 Volt, (3 series of 2), 1,200 CCA each at -18C (0F),
1,475 CCA at 0C (32F)
Battery box lockouts ground level, battery, propel and starter
(single pole)
Electrical system 24 VDC with circuit breaker protection
Emergency stops in-cab and ground level
Operator Environment
Climate control combined heater and air conditioner
w/multiple air ducts and filtered air
Cup holder 2 center console mounted
Diagnostics interface Ethernet, USB
Display screen dimmable color touch screen
w/operator information and warning
Dual overhead LED dome lights that illuminate when the door is opened
Integrated ROPS (ISO 3471:2008) and FOPS (ISO 3449:2005, Level II)
Mirrors drivers side (flat), offside (convex) and access ladder (convex)
Power outlets 12 VDC and 115 VAC
Power windows driver and passenger
Pressurized cab with fan on
Radio ready wiring, speakers and DIN fitting
Seat belt high visibility orange 3 point 2 inch wide
Seats fully adjustable driver and passenger heated seats with
air suspension
Speedometer km/h / mph
Steering wheel tilting and telescopic with horn and wiper control
Storage shelves and storage compartment located behind seats
Sun visors 2 windshield sun visors and 1 drivers door mounted blind
Windows tempered and tinted glass 6mm
Windshield laminated safety glass and tinted 9.5mm
Wipers two speed electric and intermittent with self park
and dual wiper arms

22

T 284

AC Drive System and Controls

Anti-roll back in forward and reverse
Brakes dynamic braking w/automatic hydraulic brake blending
and hydraulic service brakes
Gear assembly Liebherr gears and wheel motors
Gear ratio 43.7:1
Grid box resistor grid control system and variable AC grid box
blower motor
Litronic Plus control cabinet IGBT technology, liquid cooled,
pressurized, filtered air inlet, ground fault warning and detection
Traction control system with four-wheel speed sensing
Lighting
Access lights 3 ladder, 1 superstructure
Brake warning lights (cab mounted external) forward facing retard
and service brake (LED)
Headlights (LED) 4 x High beam, 4 x low beam
Reverse lights 2 x axle box, 1 x drivers side superstructure (LED)
Service lights 4 x engine bay, 2 x axle box (LED)
Truck lights tail, brake, retarder and indicators (LED)
Other
Access ladders 45 diagonal stair (drivers side access)
with two side ladders w/flexible step
Accumulators certified, 1 steering 170 l (45 gal), 2 brakes 7.6 l (2 gal)
(split front and rear brakes) 1 Control Valve 7.6 l (2 gal)
Axle box dual entry service access and rear air exhaust
Catwalk right and left side of engine
Centralized service station ground level, driver side, with fuel gauge
Color white / gray
Fall protection multiple personnel tie off points
Fluid sampling multi-sampling ports close to component
Grease system automatic lubrication system
Hydraulic coolers 1 x hoist system, 2 x final drive gear oil
Hydraulic filters high pressure and return line brake, steering and hoist
w/electronic monitoring
LED payload display 2 x superstructure mounted
Mud flaps front and rear of hydraulic and fuel tanks
Park brake spring applied pressure release
Recovery system auxiliary connectors for brake, steering and hoist
buddy system
Reverse alarm (2)
Rims bolt on, 2 x double gutter, 4 x single gutter
Rock ejectors bar type
Service access ladders right and left engine bay ladders w/cable steps
Shut off valves brake and steering and hoist w/electronic monitoring
Sight gauges brake, steering, hoist and radiator tanks
and front wheel hub
Towing points front and rear

Optional Equipment
Optional Equipment
Access stair powered retractable stair to main diagonal stairway
Adjustable access ladders - engine bay
Advanced camera system four views (off driver side, driver side,
reverse, and forward), integrated into dashboard touchscreen
Battery box lockouts ground level, battery (double pole),
propel and starter (single pole)
Blue Truck identifier light grill mounted
Centered dashboard gauge panel in metric and imperial
Cold climate diesel type engine heater, w/automatic control
Color Liebherr yellow/grey
Curb / berm cornering lights (LED) forward facing, superstructure
mounted (DS and ODS)
Dump body liners, heated, tailgates, rock deflectors
Dump body raise limit 45 kick out switch
Fatigue monitoring system
Fire suppression systems
Fog lights (LED) 4 x bottom radiator mounted

Gear ratios 37.33 : 1 and 53.33 : 1

Grill illumination light (LED)
Heated mirrors
High altitude package (HAP)
Hill cresting lights (LED) 2 x top grill mounted
Multiple language decals
Overspeed light externally mounted blue strobe on top of cab
Park brake off / truck in neutral warning light (LED)
externally mounted on top of cab
Proximity awareness camera and radar system integrated
into dashboard touchscreen
Reverse light (LED) off drivers side superstructure
Rock ejectors chain type
Sound attenuation package
Trolley capable
Undercarriage protection belly pan and hydraulic tank

Standard and optional equipment are subject to change at

manufacturers discretion.
Please contact your local representative for further information.

T 284

23

Wide Product Range

State-of-the-art Technology

The Liebherr Group is one of the largest construction

equipment manufacturers in the world. Liebherrs
high-value products and services enjoy a high reputation
in many other fields. The wide range includes domestic
appliances, aerospace and transportation systems,
machine tools and maritime cranes.

To provide consistent, top quality products, Liebherr

attaches great importance to each product area, its
components and core technologies. Important modules
and components are developed and manufactured
in-house, for instance the entire drive and control
technologyfor construction equipment and mining trucks.

Exceptional Customer Benefit

Worldwide and Independent

Every product line provides a complete range of models

in many different versions. With both their technical
excellence and acknowledged quality, Liebherr products
offer a maximum of customer benefits in practical
application.

Hans Liebherr founded the Liebherr family company in

1949. Since that time, the enterprise has steadily grown
to a group of more than 130 companies with over
38,000employees located on all continents. The corporate
headquarters of the Group is Liebherr-International AG
inBulle, Switzerland. The Liebherr family is the sole owner
of the company.

www.liebherr.us

Liebherr Mining Equipment Newport News Co.

4100 Chestnut Avenue, Newport News, VA 23607, USA
+1 (757) 245 5251, Fax +1 (757) 928 8755
www.liebherr.us, E-Mail: info.lme@liebherr.com
www.facebook.com/LiebherrConstruction

Printed in Germany by Eberl BK-RP LME 11481630-0.85-02.14_enGB

All illustrations and data may differ from standard equipment. Subject to change without notice.

The Liebherr Group of Companies