Divinol industrial oils

Gear oils and hydraulic fluids guide and slideway oils

Divinol industrial oils

Wherever wheels turn, surfaces are pressed against

each other or forces have to be transmitted, lubricants
need to be used to reduce start-up resistance and
friction forces and protect against wear. Modern high
performance machines are especially demanding in
this respect. They require very careful selection of
lubricants in the interest of maintaining precision,
performance, equipment value and economy of
operation.
Divinol industrial oils are high-quality hydraulic, gear
and machine oils that have been specially designed to
fulfill the requirements of modern machines and maintain their performance and precision. Our company is
certified in accordance with DIN EN ISO 9001:2008 and
DIN EN ISO 14001:2009 and thus ensures consistently
high quality standards of the manufactured products.
At the same time, we offer on-site consultation and
laboratory monitoring as well as help with questions
concerning disposal.

Divinol hydraulic oils

Page 3

Divinol industrial gear oils

Page 5

Divinol multipurpose oils

Divinol compressor oils
Divinol turbine oils

Page 6

Divinol machine oils

Page 7

Oil purity levels

Page 8

Guide and slideway oils

Page 9

Complete solution for machine tools

Page 10

Awards/References

Page 11

Divinol hydraulic oils

Designation

Density/15 C

Viscosity/40 C

Flash point

Pour point

DIN 51757

DIN 51562

DIN ISO 2592

DIN ISO 3016

kg/m3

mm2/s (cSt)

Divinol HLP ISO

10

850

10

165

-30

Divinol HLP ISO

22

860

22

195

-21

Divinol HLP ISO

32

860

32

200

-18

Divinol HLP ISO

46

870

46

210

-15

Divinol HLP ISO

68

880

68

220

-15

Divinol HLP ISO 100

880

100

225

-15

Application and

High-pressure HLP hydraulic oils in accordance with DIN 51524-2 with high

properties

ageing resistance, excellent corrosion protection and wear-protecting properties,

zinc-bearing, for all hydraulic devices. For stationary hydraulic systems.

Divinol HVI ISO

15

870

15

130

-39

Divinol HVI ISO

32

860

32

180

-30

Divinol HVI ISO

46

860

46

185

-27

Divinol HVI ISO

68

870

68

185

-24

Application and
properties

High-pressure HVLP hydraulic oils as per DIN 51524-3 with high viscosity index
for large areas of application, zinc-bearing, especially well-suited for hydraulic
units subjected to extreme variations in operating temperature (e.g. mobile
hydraulic units).

Brugger value N/mm2

Divinol HLP 46 MWB

880

46

210

-25

35

Divinol HLP 68 MWB

880

68

230

-25

35

Application and

Zinc-free, high-pressure HLP hydraulic oil in accordance with DIN 51524-2,

properties

particularly finely filtered, very high purity, high loading capacity as per Brugger
(Brugger value > 30 N/mm2), approved by Mller-Weingarten.

Divinol hydraulic oils

Designation

Density/15 C

Viscosity/40 C

Flash point

Pour point

DIN 51757

DIN 51562

DIN ISO 2592

DIN ISO 3016

kg/m3

mm2/s (cSt)

Divinol DHG ISO 10

850

10

150

-30

Divinol DHG ISO 22

860

22

165

-30

Divinol DHG ISO 32

860

32

190

-30

Divinol DHG ISO 46

870

46

210

-30

Divinol DHG ISO 68

880

68

230

-25

Divinol DHG ISO 100

880

100

230

-20

Divinol DHG ISO 150

890

150

220

-15

Application and

Detergent dispersant HLP-D hydraulic oils according to DIN 51524-2,

properties

zinc-bearing. Preferred for use in hydraulic units where there is a risk of the
formation of condensation water or the penetration of water-based cooling
lubricants, (e.g. as used with machine tools). Also well-suited for mobile and
stationary hydraulic systems with hydrostatic drive.

Divinol DHG-ZF ISO VG 10

860

10

160

-30

Divinol DHG-ZF ISO VG 22

870

12

190

-25

Divinol DHG-ZF ISO VG 32

870

32

190

-25

Divinol DHG-ZF ISO VG 46

880

46

Application and

Detergent dispersant HLP-D hydraulic oils and gear oils, zinc- and ash-free,

properties

fulfill DBL 6721. The products have a high lubricating effect and an excellent

200

-20

purification and dirt carrying capacity. Preferred for use in machines and facilities
where water-miscible cooling lubricants are used and the formation of condensation
water is possible due to strong temperature variation. Can also be used to lubricate
gears in machines. Meets the requirements of CLP oils according to DIN 51517-3.

Divinol industrial gear oils

Designation

Density/15 C

Viscosity/40 C

Flash point

Pour point

DIN 51757

DIN 51562

DIN ISO 2592

DIN ISO 3016

kg/m3

mm2/s (cSt)

Divinol ICL ISO

32

880

32

180

-15

Divinol ICL ISO

46

880

46

180

-15

Divinol ICL ISO

68

880

68

180

-15

Divinol ICL ISO 100

890

100

210

-15

Divinol ICL ISO 150

890

150

210

-15

Divinol ICL ISO 220

900

220

210

-12

Divinol ICL ISO 320

900

320

210

-12

Divinol ICL ISO 460

900

460

210

-12

Divinol ICL ISO 680

900

680

210

-3

Application and

Industrial high-pressure CLP gear oils in accordance with DIN 51517-3 with additives

properties

to reduce friction and wear, silicon- and zinc-free, very high pressure absorption
capacity. Meets the requirements of AISE 224, AGMA 9005-E02 and David Brown
S1.53.101 (E). For use in highly-stressed industrial gearboxes using circulating lubrication and dip bath gearboxes with spur pinions and bevel gear and worm gears.
FZG test in accordance with DIN 51354/2: damage load level > 12.

Divinol MCL ISO 68

880

68

200

-15

Divinol MCL ISO 320

900

320

210

-12

Divinol MCL ISO 460

900

460

210

-12

Application and

High-pressure industrial CLP gear oils in accordance with DIN 51517-3 with solid

properties

lubricant additives (molybdenum disulphide MoS2), silicon- and zinc-free,

very high pressure absorption capacity. Meet the requirements of AISE 224,
AGMA 9005-E02 and David Brown S1.53.101 (E). Can be used for gear wheels
and worm gears with high surface pressures or frequent overloading, also for
impact and thermal loadings as well as for sliding bearings with oscillating movements. FZG test in accordance with DIN 51354/2: damage load level > 12.

Divinol multipurpose oils

Designation

Density/15 C

Viscosity/40 C

Flash point

Pour point

DIN 51757

DIN 51562

DIN ISO 2592

DIN ISO 3016

kg/m3

mm2/s (cSt)

Divinol GWA ISO

820

120

-15

Divinol GWA ISO

830

130

-15

Divinol GWA ISO

840

140

-25

Divinol GWA ISO 10

850

10

165

-30

Divinol GWA ISO 22

870

22

180

-21

Divinol GWA ISO 32

870

32

205

-18

Divinol GWA ISO 46

870

46

215

-15

Divinol GWA ISO 68

880

68

220

-15

Divinol GWA ISO 100

880

100

220

-15

Divinol GWA ISO 150

890

150

225

-12

Divinol GWA ISO 220

900

220

230

-10

Divinol GWA ISO 460

900

460

250

-10

Application and

Zinc-free, multipurpose oils for bearings, gears and hydraulics in accordance

properties

with DIN 51517-2. Divinol GWA ISO 10 to Divinol GWA ISO 150 also meet
the HPL requirements as per DIN 51524-2.
Products of the Divinol GWA series are used in hydraulic and mechanical
gearboxes, in roller bearings and slide bearings, in hydraulics, for lubricating
spindles, etc.

Divinol compressor oils

Divinol VDL ISO

32

870

32

230

-20

Divinol VDL ISO

46

880

46

230

-20

Divinol VDL ISO

68

880

68

240

-20

Divinol VDL ISO 100

880

100

240

-20

Divinol VDL ISO 150

890

150

240

-20

Application and

Compressor oils for the lubrication of piston compressors and rotary piston compressors

properties

with high thermal loads for compressing temperatures of up to +220 C. They correspond to DIN 51506 Group VCL / VDL or ISO DP 6521 category DAA-DAB-DAH-DA.

Divinol turbine oils

Divinol SVO ISO

32

870

32

230

-20

Divinol SVO ISO

46

880

46

230

-20

Divinol SVO ISO

68

880

68

240

-20

Divinol SVO ISO

100

880

100

240

-20

Application and

Turbine oils for use in screw air compressors as well as steam, gas and water turbines.

properties

Meet the requirements for lubricating oils according to DIN 51515-1 / L-TD and DIN
51515-2 / L-TG and ISO 6743-5 categories L-TGA / L-TGB / L-TSA / L-TGSB.

Divinol machine oils

Designation

Divinol GW ISO

Density/15 C

Viscosity/40 C

Flash point

Pour point

DIN 51757

DIN 51562

DIN ISO 2592

DIN ISO 3016

kg/m3

mm2/s (cSt)

840

140

-20

Divinol GW ISO 10

850

10

160

-20

Divinol GW ISO 46

870

46

205

-15

Divinol GW ISO 100

880

100

240

-12

Divinol GW ISO 150

890

150

270

-9

Application and

Age-resistant lubricating oils without additives, with good viscosity-temperature

properties

behaviour. Lubricating oils C as per DIN 51517-1. Can be used for lubricating slide
and roller bearings, gearboxes that are not heavily loaded, gearwheels, etc.

SO standard 6743-4 and -6 use the following identifying letters:

for HL = L-HL, for HLP = L-HM, for HVLP = L-HV, for C = L-HH,
for CL = L-CKB, for CLP = L-CKC

We would be glad to provide you with technical documents on request concerning

other industrial oils such as guide and slideway oils, adhesive oils, technical white oils,
heat transfer oils or about our entire range of industrial lubricants for cutting and
non-cutting metalworking processes.
For detailed consultation regarding technical application, please contact our sales
representatives.

Oil purity levels

Ever-increasing requirements regarding reliability, availability and economic efficiency of hydraulic and lubricating systems create demand for
operating liquids or lubricants of constantly increasing purity.
There are different methods for classifying existing system cleanliness. ISO 4406:1999 is applied according to DIN 51524. Limit value according to DIN 21/19/16 ZG when bottling: 19/15/12. These test methods are only valid for hydraulic and lubricating oils.
Electronic particle counters as well as purity level monitors which function in accordance with the light barrier (surface determination)
principle are used to determine oil purity levels. Microscopic analyses are also still performed via light microscope. The amount and size of the
particles per 100 ml liquid are measured. Due to the determined values, the oil purity level of the respective medium can be seen in the
following charts.

Oil cleanliness class according to ISO 4406:1999

Number of particles per 100 ml

> 5 m

> 15 m

> 4 m(c)

> 6 m(c)

> 14 m(c)

from
4 000 000
2 000 000
1 000 000
500 000
250 000
130 000
64 000
32 000
16 000
8 000
4 000
2 000
1 000
500
1)

to
8
4
2
1

000
000
000
000
500
250
130
64
32
16
8
4
2
1

from
000
000
000
000
000
000
000
000
000
000
000
000
000
000

500
250
130
64
32
16
8
4
2
1

000
000
000
000
000
000
000
000
000
000
500
250
130
64

to
1 000
500
250
130
64
32
16
8
4
2
1

from
000
000
000
000
000
000
000
000
000
000
000
500
250
130

64
32
16
8
4
2
1

000
000
000
000
000
000
000
500
250
130
64
32
16
8

Code
only
to
130
64
32
16
8
4
2
1

APC1)
000
000
000
000
000
000
000
000
500
250
130
64
32
16

23
22
21
20
19
18
17
16
15
14
13
12
11
10

/
/
/
/
/
/
/
/
/
/
/
/
/
/

20 / 17
19 / 16
18 / 15
17 / 14
16 / 13
15 / 12
14 / 11
13 / 10
12 / 9
11 / 8
10 / 7
9/6
8/5
7/4

3-digit code only when using an automatic particle counter (APC)

Filters for measuring oil cleanliness:

Oil purity class as per ISO 4406 (1999) is specified as a

Filling at ZG

DIN specification

19/15/12

21/19/16

composite number such as 17/15/12.

The first number refers to the particles > 4 m, the
number in the middle to particles > 6 m and the last
number to particles >14 m.

Guide and slideway oils

Divinol guide and slideway oils have been specially designed for the high demands
on performance, precision and economy of operation in modern manufacturing
technology. The consistently high quality of the lubricant components used, results
in optimum operational reliability for the users. The guide and slideway oils from
Zeller+Gmelin are invaluable contributions to more efficient and economical
production. These high performance lubricants guarantee high reliability and
positioning accuracy of the machine tool, especially if the machines are equipped
with plastic-coated guideways.

Demulsifying guideway oils for use in emulsion-filled machine tools for the lubrication of metal and metal-plastic bearings on conventional slideways according
to DIN 51502 CGLP. Special additives reduce the frictional forces during start-up
and prevent the stick-slip effect at low sliding speeds.

High performance lubricants - demulsifying

DIVINOL T3 EP
ISO 32

Key figures
3

DIVINOL T6 EP
ISO 68

DIVINOL T8 EP
ISO 100

DIVINOL T12 EP
ISO 220

Density at 15 C [kg/m ]

870

880

880

890

DIN 51757

32

68

100

220

DIN 51562

Flash point C

> 200

> 200

> 200

> 200

DIN ISO 2592

Pour point C

-12

-10

-10

-10

DIN ISO 3016

Viscosity at 40 C [mm /sec]

These data are calculated average values. We reserve the right to deviations within the usual tolerances.

High performance lubricants - for oil-filled machine tools

DIVINOL T6 KA
ISO 68

Key figures

DIVINOL T9 KA
ISO 150

DIVINOL T12 KA
ISO 220

880

890

900

DIN 51757

68

150

220

DIN 51562

Flash point C

220

220

220

DIN ISO 2592

Pour point C

-12

-12

-10

DIN ISO 3016

Density at 15 C [kg/m ]
Viscosity at 40 C [mm /sec]

These data are calculated average values. We reserve the right to deviations within the usual tolerances.

Guideway oils according to DIN 51502 CGLP for guides and slideways in oil-filled machine tools, can also be used in machines without
separate oil circuits, for example, when machining oils and guideway oils are supplied from a container.

Complete solution for machine tools

Zubora - water-miscible cooling lubricants

Water-miscible, high performance cooling lubricants on the cutting edge of
technology which satisfy the current legal provisions. Suitable for nearly all
materials and machining operations. Can be used for a wide variety of water
qualities - special soft or hard water products. Long lifetime due to high
emulsion stability.

Multicut - non-water-miscible cooling lubricants

Wide range of cooling lubricants for a variety of applications and materials.
Low-oil-mist and low-evaporation products; universal varieties or multipurpose
oils. High performance machining oils based on the latest synthesis technology
for difficult machining operations and grinding processes. Special products for
precision processing.

Divinol Lithogrease 00/000 for lubricating rollers

of linear slideways in machine tools
NLGI grades 00 and 000
Water-resistant, semi-synthetic, EP-alloyed fluid greases for the lubrication of
gears with high mechanical and thermal loads. Ideal for the lubrication of
rolling, spherical or needle-bearing linear systems in machine tools. Appropriate
approvals are available.
Divinol Lithogrease 000 has a very favourable backflow behaviour.
Operating temperature range - 30 C to + 140 C.
(Labeling as per DIN 51 826: GP 00/000 N-30, as per ISO 6743-9: ISO-L-XCDHB
00/000.)

10

Awards/References

June 2003/June 2005/March 2010/July 2013:

Recipient of the Supplier Award as one of the best
lubricant suppliers of the Bosch group.

Reference list:
Allgaier Automotive GmbH
Automobiltechnik Drbheim
Berthold Hermle AG
Bosch Rexroth AG
Decoma Exterior Systems GmbH
EMAG Salach
GKN Sinter Metals GmbH
GROZ-BECKERT KG
HMP Umformtechnik GmbH

MTU Friedrichshafen GmbH

Pacoma GmbH
ROBERT BOSCH GMBH
Schuler Pressen GmbH
SDRAD GmbH
Terrot GmbH
voestalpine Polynorm
voestalpine Stamptec GmbH

11

Zeller+Gmelin GmbH & Co. KG is a medium-sized, independent chemical

company with headquarters in Eislingen, Germany. The company employs over
850 employees world-wide, of which approximately 20 % work in research and
development. This shows that Zeller+Gmelin is not only a manufacturer and
supplier, but also an important development partner for the lubricant industry.
After decades of specialization, there are now over 700 high performance
lubricants in our product portfolio, which are divided into the following areas:

Machining

Forming

Industrial lubricants

Special lubricants

Water-miscible and non-water-miscible cooling

lubricants for metalworking
Corrosion inhibitors
Punching and deep drawing agents
Wire drawing agents
Cold mass forming products
High performance industrial greases
Gear oils and hydraulic fluids
Guide and slideway oils
Lubricants for the textile industry
Separating agents for the wood and metal industry
Lubricants for powder metallurgy

Zeller + Gmelin GmbH & Co.KG

Schlossstrae 20 73054 Eislingen, Germany
Phone +49 7161 802-0 Fax +49 7161 802-370
info@zeller-gmelin.de www.zeller-gmelin.de

1P345042-1213-0

We are there for you in over 100 countries world-wide!