C1.1 Power Unit

C1.
Industrial Power Unit

17.9 bkW/24.0 bhp
3000 rpm
CAT ENGINE SPECIFICATIONS
Engine Pictured
with Optional
Equipment
I-3, 4-Stroke-Cycle Diesel

Bore.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 mm (3.03 in.)
Stroke.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 mm (3.19 in.)
Displacement.. . . . . . . . . . . . . . . . . . . . . . . . 1.131 L (69.0 in3)
Aspiration.. . . . . . . . . . . . . . . . . . . . . . . . . Naturally Aspirated
Compression Ratio.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23:1
Combustion System. . . . . . . . . . . . . . . . . . Indirect Injection
Rotation (from flywheel end).. . . . . . . . . Counterclockwise
Capacity for Liquids
Cooling System.. . . . . . . . . . . . . . . . 5.21 L (5.5 U.S. qts.)
Lube Oil System (refill).. . . . . . . . . . . 4.9 L (5.2 U.S. qts.)
Engine Weight, Net Dry (approximate)
with radiator package.. . . . . . . . . . . . . . . 129 kg (284 lb.)
FEATURES
Emissions
Meets 2008 Tier 4 Interim, Stage IIIA emissions
requirements. Tier 4 Interim refers to EPA (U.S.)
standards. Stage IIIA refers to European standards.
Reliable, Quiet, and Durable Power
World-class manufacturing capability and processes
coupled with proven core engine designs assure
reliability, quiet operation, and many hours of
productive life.
High Performance
This radiator-cooled package delivers impressive
performance up to a 3000 rpm rating.
Fuel Efficiency
Fuel consumption optimized to match operating cycles
of a wide range of equipment and applications.
Broad Application Range
Industry leading range of factory configurable ratings
and options for agricultural, materials-handling,
construction, mining, aircraft ground support, and other
industrial applications.
Package Size
Ultra-compact package size ensures ease of installation
as well as exceptional power density. Radiators have
been designed and air filters positioned for easy
installation.
Low-Cost Maintenance
Single-side servicing improves ease of maintenance
and simplifies the servicing routine. Service intervals at
500 hours are standard.
Testing
Every Cat engine is quality tested to ensure proper
engine performance.
World-class Product Support Offered Through Global
Cat Dealer Network
Scheduled maintenance
Customer Support Agreements (CSA)
Cat Extended Service Coverage (ESC)
Superior dealer service network
Extended dealer service network through the Cat
Industrial Service Distributor (ISD) program
STANDARD EQUIPMENT
Options must be selected for the following features.
See your Cat dealer for a detailed description of
options for each feature.
Air Inlet
Inlet manifold
Control System
Alternator 12 volt 15 amp, starter motor 12 volt, glow
plug starting aid
Cooling System
Belt-driven coolant pump, coolant temperature switch,
mounted radiator and fan
Flywheels and Flywheel Housing
SAE No. 6 1/2 flywheel, SAE No. 5 flywheel housing
Fuel System
Fuel injection pump, fuel filter, Electronic Shut-off
Solenoid (ESOS)
Lube System
Spin-on lube oil filter, lube oil pressure switch, lube oil
sump
Power Take Off
Provision for timing case rear facing PTO
General
Cast iron engine block, cast iron exhaust manifold
side outlet, mounted air cleaner, cold start capability to
-20 C (-4 F)
Web Site: For additional information on all your power requirements, visit www.cat-industrial.com.
LEHH6362-03
Page 1 of 2
Industrial Power Unit

C1.1
PERFORMANCE DATA
17.9 bkW/24.0 bhp
DIMENSIONS
Naturally Aspirated 3000 rpm

(1)
C1.1 IPU
70
Gross Intermittent Nm
Torque (Nm)
Torque (lb-ft)
66.9 Nm
(49.3 lb-ft)
64.60 Nm
(47.7 lb-ft)
60
(2)
52
44
Net Intermittent Nm
(3)
27
19.7 kW
(26.4 hp)
20
Gross Intermittent kW
17.9 kW
(24.0 hp)
Net Intermittent kW
20
Power (bhp)
Power (bkW)
15
10
13
5
1000 1200 1400 1600
1800
2000 2200
2400
2600
2800
(1) Length
778 mm (30.6 in.)
(2) Width
438 mm (17.2 in.)
(3) Height
730 mm (28.7 in.)
Note: Dimensions depend on final specifications.
7
3000 3200
Engine Speed (rev/min)
Lower speed ratings cannot be read from this curve.
Speed
rpm
Power
bkW
Torque
Nm
Power
bhp
Torque
lb-ft
3000
17.9
64.6
24.0
47.6
RATING DEFINITIONS AND CONDITIONS

IND-C (Intermittent) is the horsepower and speed
capability of the engine where maximum power
and/or speed are cyclic (time at full load not to
exceed 50%).
Additional ratings are available for specific
customer requirements. Consult your Cat dealer.
Rating Conditions for Diesel Engines up to

6.6 liter are based on ISO/TR14396, inlet air
standard conditions with a total barometric
pressure of 100 kPa (29.5 in. Hg), with a vapor
pressure of 1 kPa (.295 in. Hg), and 25C
(77F). Performance is measured using fuel to
specification EPA 2D 89.330-96 with a density .
of 0.845-0.850 kg/L @ 15C (59F) and fuel inlet
temperature 40C (104F).
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

LEHH6362-03 (2-10)
Printed in U.S.A.
2010 Caterpillar
All rights reserved.

C1.1 Power Unit

Uploaded by

Copyright:

Available Formats

C1.1 Power Unit

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

C1.1 Power Unit

Uploaded by

Copyright:

Available Formats

C1.

Industrial Power Unit

CAT ENGINE SPECIFICATIONS

I-3, 4-Stroke-Cycle Diesel

Industrial Power Unit

17.9 bkW/24.0 bhp

Naturally Aspirated 3000 rpm

778 mm (30.6 in.)

438 mm (17.2 in.)

730 mm (28.7 in.)

Note: Dimensions depend on final specifications.

Engine Speed (rev/min)

Lower speed ratings cannot be read from this curve.

RATING DEFINITIONS AND CONDITIONS

Rating Conditions for Diesel Engines up to

You might also like