Modificaiton Bulletin AF200

MODIFICATION BULLETIN NO.
Model
PAGE 1 OF 5
AD1
Date of
Modification
Volt/Hz
Modified Article
Serial Number
No serial Number cut-in information
Reason for
Parts catalog correction
Modification
The following should be corrected. Please correct your part catalog.

1. The following part numbers have been corrected.
Wrong Part Number Correct Part Number
Description
Qty
Index No.
Page
G0202742
G0202741
Upper Registration Roller
19
G0204482
G0204374
Middle Antistatic Bruch - FD
32
39
H5213355
G0201160
C Ring - Paper Feed Roller
22
43
11027324
11027676
Connector Header - 16P
101
57
11027452
11027677
Connector DF11-22DP-2V
103
57
A1399351
A1939351
ROM Board 2
65
2. The following part is not used. Delete this part from your parts catalog.
Part Number
G0202744
Description
Gear - 40Z
Qty
Index No.
Page
20
19
MODIFICATION BULLETIN NO. 1
PAGE 2 OF 5
3. The descriptions of the following parts have been changed.

Part Number
Wrong Description
Correct Description
Qty
Index No.
Page
A1931853
Laser Unit (115V)
LD Unit Assy (115V)
27
A1931855
Laser Unit (230V)
LD Unit Assy (230V)
27
A1931861
LD Unit Assy (230V)
Laser Unit (115V)
27
A1931865
LD Unit Assy (230V)
Laser Unit (230V)
27
4. The following parts have been added.

Part Number
Description
Qty
Index No.
Page
A1935475
Harness - Key Counter (LAN)
18
45
G0203870
Discharge Brush
28
35
5. The numbers used of the following parts have been changed.

Old Part Number
New Part Number
Description
Qty
Index No.
Page
G0202105
Bracket - Quenching Lamp
35
G0202104
Quenching Lamp
35
Quenching Lamp Assy
35
Paper Exit Pawl
12
39
G0204454
Paper Exit Pawl
12
39
G0204455
Spring
39
39
G0202104
G0204411
Fig. no.
Fig.2
Fig.3
PAGE 3 OF 5
6. The index numbers in the illustration have been changed as follows. (SECTION 11. LASER UNIT)
1
2
4
Fig. 1
PAGE 4 OF 5
28
Fig. 2
PAGE 5 OF 5
ISSUED ON: November 15, 96
39
12
for
Fig. 3
S. Fujii, General Manager

2nd.Field Information Dept. QAC
PAGE 1 OF 2
Model
AD1
Volt/Hz
Modified Article
Date of
Modification
Noserial number cut-in information
Reason for
Modification

1. The following part has been deleted and the illustration has been changed (refer to the attached
Old Part Number
A1941483
Serial Number
New Part Number
Description
Key Top - LCD
illustration).
Qty
Index No.
Page
21
13
PAGE 2 OF 2
17
for
S. Fujii, General Manager


Model
PAGE 1 OF 4
AD1
Volt/Hz
ISSUED ON: January 15 , 97

Date of
Modification
Modified Article
Reason for
Modification

1. The following part has been added and the illustration has been changed (refer to the attached i llustrations).
Old Part Number
New Part Number
Description
Qty
Index No.
Page
A1937341
Decal - Brand Name (GES)
22
A1937343
Decal - Brand Name (NAS)
22
A1937345
Decal - Brand Name (REX)
22
A1937347
Decal - Brand Name (LAN)
22
A1931793
Scanner Home Sensor Stopper
14
23
2. The index number of the illustration for section 9 (Optics Section 1) has been modified as follo ws.
Wrong index No. 14 Correct index No. 1
Serial Number
PAGE 2 OF 4

3. The index number 24 of section 10 (Optics Section 2) is in the illustration, but not in the list . So, the following part has been added.
Old Part Number
New Part Number

A1931796
Description
Seal - Carriage
Qty
Index No.
Page
24
25
PAGE 3 OF 4
22
PAGE 4 OF 4
14
for
T. Fujii, General Manager

RICOH
Modification Bulletin
Model: AD1
Date: 28-Feb-97
No: 004
1/1
Modified Article: Bracket-Finisher
Prepared by: K. Ugaeri
From: QAC 2nd Field Information Dept .
Checked by: S. Fujii
Reason for
Modification:
Vendor change
To facilitate assembly
To improve reliability
To meet standards
(
)
Other
Old part
number
New part
number
A1935823
Description
Bracket - Finisher
Qty
Int
Page Index Note
1-0
MODEL NAME
V/ Hz
Option for
JAPAN PRODUCTION
CODE
SERIAL NUMBER
A193 - 10
nashuatec
D420
SAVIN 9920DP
Aficio 200
Aficio 200
Gestetner 3220
Infotec 4201
Aficio 200
Aficio 200
Lanier
5020MFD
Lanier
5020MFD
115/60
U. S. A
115/60
115/60
115/60
220/50
220/50
220/50
220/50
115/60
U. S. A., CANADA
TAIWAN
U. S. A., CANADA
EUROPE
EUROPE
EUROPE
EUROPE
U. S. A.
A193 - 15
A193 - 17
A193 - 19
A193 - 22
A193 - 26
A193 - 27
A193 - 29
A193 - 55
220/50
EUROPE
A193 - 65
61
181
RICOH
Reissued: 15-Jan-00
MB Correction
The items in bold italics have been corrected or added.
The illustration has changed as shown below.
Model: AD1
Date: 28-Feb-97
No: MA193005a
Modified Article: Paper Exit Sensor
From: QAC 2nd Field Information Dept.
Checked by: N. Okuda
Reason for
Modification:
Vendor change
1/1
To meet standards
(
)
Other
To prevent the paper exit sensors from being removed while pulling out jammed paper in
the fusing unit, the shape has been changed.
Old part
number
New part
number
G0204429
G0204490
G0204472
G0204472
Description
Paper Exit Sensor
Paper Exit Sensor
Current
Qty
2-1
1-1
New
Int
Page Index Note

38
36
40
16
RICOH
Model: AD1
Date: 28-Feb-97
No: 006
1/2
Modified Article: Rubber Guard
Reason for
Modification:
Vendor change
To meet standards
(
)
Other
A Rubber Guard has been added on the boss on the front door to prevent the operator
from injuring a finger.
Old part
number
New part
number
G0201259
Description
Qty
Rubber Guard
Int
Page Index Note
0-1
Rubber Guard
Front Door
BOSS
MODEL NAME
V/ Hz
Option for
nashuatec
D420
SAVIN 9920DP
Aficio 200
Aficio 200
Gestetner 3220
Infotec 4201
Aficio 200
Aficio 200
Lanier
5020MFD
Lanier
5020MFD
115/60
U. S. A
JAPAN PRODUCTION
CODE
SERIAL NUMBER
A193 - 10
A107010001
115/60
115/60
115/60
220/50
220/50
220/50
220/50
115/60
U. S. A., CANADA
U. S. A., CANADA
TAIWAN
EUROPE
EUROPE
EUROPE
EUROPE
U. S. A.
A193 - 15
A193 - 17
A193 - 19
A193 - 22
A193 - 26
A193 - 27
A193 - 29
A193 - 55
6A77010001
A7226120644
(A722702)
AH27010001
3L00170001
A7227011021
A7227012021
L5027011010
220/50
EUROPE
A193 - 65
L5027011216
RICOH
Model: AD1
Date: 28-Feb-97
No: 007
1/1
Modified Article: Paper Separator
Reason for
Modification:
Vendor change
To meet standards
(
)
Other
To reduce the noise of the paper in the paper separator or the tray case, a sponge sheet
has been added on the paper separator.
Old part
number
New part
number
G0202561
G0202568
G0202573
G0202558
Description
Paper Separator
Paper Separator
Qty
Int
1-1
1-1
O/O
O/O
Page Index Note

16
16
14
15
RICOH
Model: AD-1
PAGE: 1/1
No: 8
Date: 19-Mar-97
Modified Article: Front Holder-Fusing Lamp
Prepared by: K.Ugaeri
From: QAC 1st Field Information Dept.
Reason for
Modification:
Vendor change
Part Standardization
Other
To meet standards
(
)
To prevent the Front Fusing Cover from becoming hot, the Front Holder-Fusing Lamp has
a shield plate from December production 96.
Old part
number
New part
number
G0204161
G0204160
Description
Front Holder-Fusing Lamp
Qty
Int
1-1
x/o
Page Index Note

32
27
Front Fusing
Front Holder - Fusing Lamp
(New)
(Current)
G0204161
G0204160
RICOH
Model: AD1
PAGE: 1/2
Date: 19-Mar-97
No: 9
Modified Article: Harness - Fusing Lamp
Reason for
Modification:
Vendor change
Other
To meet standards
(
)
(Only for Europe and Asia.)

Old part
number
New part
number
Description
Qty
Int
A1935459
A1935216
Harness - Fusing Lamp
1-1
O/O
Page Index Note

44
20
The cap has been added to protect the connector for the heater.
Cap
RICOH
Model: AD1
Date: 19-Mar-97
MODEL NAME
V/ Hz
Option for
JAPAN PRODUCTION
CODE
SERIAL NUMBER
A193 - 10
---
nashuatec
D420
SAVIN 9920DP
Aficio 200
Aficio 200
Gestetner 3220
Infotec 4201
Aficio 200
Aficio 200
Lanier
5020MFD
Lanier
5020MFD
115/60
U. S. A
115/60
115/60
115/60
220/50
220/50
220/50
220/50
115/60
U. S. A., CANADA
U. S. A., CANADA
TAIWAN
EUROPE
EUROPE
EUROPE
EUROPE
U. S. A.
A193 - 15
A193 - 17
A193 - 19
A193 - 22
A193 - 26
A193 - 27
A193 - 29
A193 - 55
----(A722704)
AH27020951
3L00370001
A7227030441
A7227031491
---
220/50
EUROPE
A193 - 65
L5027032180
PAGE: 2/2
No: 9
RICOH
Model: AD1
PAGE: 1/2
Date: 19-Mar-97
No: 10
Modified Article: Front Guide-Fusing Unit
Reason for
Modification:
Vendor change
Other
To meet standards
(
)
To prevent paper jams at the fusing unit entrance when the trailing edge contacts the
Front Guide - Fusing Unit (G0201088), the front guide has been removed from February
production 97.
Old part
number
G0201088
New part
number
Description
Qty
Front Guide-Fusing Unit
1-0
Int
Page Index Note

34
27
Front Guide - Fusing Unit

(G0201088)
Jammed paper
Fusing Unit
RICOH
Model: AD1
Date: 19-Mar-97
MODEL NAME
V/ Hz
Option for
JAPAN PRODUCTION
CODE
SERIAL NUMBER
A193 - 10
A107020001
nashuatec
D420
SAVIN 9920DP
Aficio 200
Aficio 200
Gestetner 3220
Infotec 4201
Aficio 200
Aficio 200
Lanier
5020MFD
Lanier
5020MFD
115/60
U. S. A
115/60
115/60
115/60
220/50
220/50
220/50
220/50
115/60
U. S. A., CANADA
U. S. A., CANADA
TAIWAN
EUROPE
EUROPE
EUROPE
EUROPE
U. S. A.
A193 - 15
A193 - 17
A193 - 19
A193 - 22
A193 - 26
A193 - 27
A193 - 29
A193 - 55
6A77020001
A7227020001
(A722703)
AH27020001
3L00270001
A7227020749
A7227021345
L5027021541
220/50
EUROPE
A193 - 65
L5027021685
PAGE: 2/2
No: 10
RICOH
Model: AD1
PAGE: 1/1
Date: 19-Mar-97
No: 11
Modified Article: Parts for the finisher
Reason for
Modification:
Vendor change
Other
To meet standards
(
)
A harness and a bracket have been added for the Finisher (SR210) from December
production 96.
New part
Old part
number
A1931319
A1931207
11050344
Description
Qty
Int
Operation Decal
Lower Left Cover
Clamp
Harness - Finisher
Bracket Assy - Finisher
1-1
1-1
1-0
0-1
0-1
x/o
x/o
Page Index Note
number
A2241319
A2241207
A1935497
A1935819
7
9
61
21
3
178
Bracket Assy-Finisher
Harness-Finisher
RICOH
PAGE: 1/1
Reissued: 15-Oct-99
MB Correction
Date: 30-Apr-97
Model: AD1
No: MA193012a
Modified Article: Transfer and Separation Unit
Reason for
Modification:
Vendor change
Other
To meet standards
(
)
To standardize the transfer and separation unit carton box with the Japanese version, the
following part has been changed.
Old part
number
New part
number
A6733881
A6733880
Description
Transfer and Separation Unit
Qty
Int
X/O
Page Index Note

35
16
RICOH
Model: AD1
PAGE: 1/1
No: 13
Date: 31-Aug-97
Modified Article: Parts catalog correction
Prepared by: M.Horiike

Reason for
Modification:
Vendor change
Part standardization
Other
To meet standards
(
)
The following should be corrected.

Please correct your parts catalog.
1. The following description has been corrected.
part
number
Wrong
description
A1934188
Header-230V 700W
Correct
description
Page Index
Fusing Lamp-230V 700W
33
14
2. The part number for the Shield Plate (A1935826) is on page 61-index 182 but not
the illustration for this part. So, the illustration and the parts list have been changed
(refer to the attached illustration).
Old part
number
New part
number
A1935826
Description
Shield Plate
26
Qty
Int
Page Index Note

9
26

Model: AD1/AD1-E
PAGE: 1/1
No: 14
Date: 31-Oct-97
Modified Article: Platen Cover
Prepared by: S.Tomoe
From: QAC Field Information Dept.

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The index number of the following parts should be corrected. Please correct your parts
catalog.
part
number
A1931317
A0531957
Description
Platen Cover Bracket
Flex Hinge - Platen Cover
Qty
2
1
Int
Page
Old
Index
New
Index
11
11
5
6
6
5
Note

Model: AD1-E
PAGE: 1/1
No: 15
Date: 31-Oct-97
Modified Article: Base Connector Bracket-LCT
Prepared by: S.Tomoe

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following should be corrected. Please correct your parts catalog.

Old part
number
New part
number
C2242867
G0202722
C2252867
G0202723
A2245821
Description
Decal - Key Top Cover (NRG)
By-pass Feed Shaft
Base Connector Bracket - LCT
25
Qty
1
1
1
Int
Page Index Note

7
23
53
101
31
101
A224.WMF
24
29
31

Model: AD1E
PAGE: 1/1
Date: 15-Apr-98
Modified Article: Cover -Vertical Transport
No: 16

Reason for
Modification:
Vendor change
Other
To meet standards
(
)

Old part
number
New part
number
G0202762
G0202634
Description
Cover Vertical Transport
Qty
1->1
Int
Page Index
25

Model: AD1/AD1E
PAGE: 1/2
Date: 15-Apr-98
Modified Article: Paper Tray Base
No: 17

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following part is missing. Please correct your part catalog.

For AD1 (A193)
Old part
number
New part
number
G0202590
Description
Paper Tray Base
Qty
Int
Page Index
17
17
For AD1E (A224)

Old part
number
New part
number
G0202590
Description
Paper Tray Base
Qty
1
Int
Page Index
17
19

Model: AD1/AD1E
Date: 15-Apr-98
PAGE: 2/2
No: 17

Model: AD1/AD1E
PAGE: 1/2
Date: 15-Apr-98
Modified Article: Harness-SBU
No: 18

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following part number has been set up recently. Please correct your part catalog.
For AD1 (A193)
Old part
number
New part
number
A1935468
Description
Harness SBU
Qty
Int
Page Index Note

23
14
For AD1E (A224)

Old part
number
New part
number
A1935468
Description
Harness SBU
Qty
1
Int
Page Index Note

27
16

Model: AD1/AD1E
Date: 15-Apr-98
PAGE: 2/2
No: 18

Model: AD1/AD1E
Date: 15-Apr-98
Modified Article: Bypass Tray Ass'y
PAGE: 1/1
No: 19

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The assembly part number for the bypass tray has been set up to facilitate assembly.
Old P/N
New P/N
G0202700
Description
Bypass Feed Table Assy
Qty
Index No.
Page
15
5.By-pass Feed Table (A193)

Model: AD1E
Date: 15-Apr-98
Modified Article: Operating Instructions for Asia
PAGE: 1/1
No: 20

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The part numbers for the operating instruction manuals for Asia are missing. Please
correct your part catalog.
Old P/N
New P/N
Description
Qty
Index No
Page
A2248608
Operating Instructions Main Asia
10
67
A8108608
Operating Instructions Copy Asia
10
67
!"#$%
PAGE: 1/1
Reissued: 07-Nov-00
MB Correction
Model: AD1/AD1E
No: MA193021a
Date: 15-Apr-98
Modified Article: Lever for the transfer and separation unit
From: Technical Services Dept., GTS Division

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The part number for a spring of the lever has been newly set up.
The part number for the lever of the transfer and separation unit has been newly set up.
For AD1
Old P/N
New P/N
Description
Qty
Index No.
Page
G0203865
Lever Transfer unit
29
35
G0203866
Spring Lever
30
35
Qty
Index No
Page
For AD1E
Old P/N
New P/N
Description
G0203865
Lever Transfer unit
29
43
G0203866
Spring Lever
30
43
30

Model: AD1/AD1E
PAGE: 1/1
No: 22
Date: 15-Apr-98
Modified Article: Vertical Relay Guide

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following should be corrected in your part catalog.

New part number "G0202612" includes two mylars. A part number for the mylars has been
set up separately.
For AD1
Old P/N
G0202613
New P/N
Description
Qty
Index No.
Page
G0202612
Vertical Relay Guide Assy
12
21
G0202621
Mylar Vertical Relay Guide
36
21
Qty
Index No.
Page
The mylars have been added from November '96 production.

For AD1E
Old P/N
G0202613
New P/N
Description
G0202612
Vertical Relay Guide Assy
12
25
G0202621
Mylar Vertical Relay Guide
41
25
RICOH
Model: AD1
PAGE: 1/1
Date: 15-May-98
Modified Article: Drive Section 2
No: 23
Prepared by: S. Tomoe

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
Old part
number
New part
number
G0201187
G0201178
Description
Timing Belt S2M 158 mm
Timing Pulley - 51T
Qty
1
1
Int
Page Index Note

43
43
30
30
RICOH
Model: AD1/AD1E
PAGE: 1/2
No: 24
Date: 31-May-98
Modified Article: Toner Hopper Unit

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The part numbers for the toner hopper unit have just been set up.
For AD1
Old P/N
New P/N
G0203030
Description
Toner Hopper Unit AD1
Qty
Index No.
Page
29
Qty
Index No.
Page
33
For AD1E
Old P/N
New P/N
A2243030
12.Toner Hopper Unit (A193)
Description
Toner Hopper Unit AD1E
RICOH
Model: AD1/AD1E
14.Toner Hopper Unit (A224)
Date: 31-May-98
PAGE: 2/2
No: 24

Model: ADAM
PAGE: 1/1
Date: 30-Sep-98
Modified Article: Tapping Screw
No.: 25

Reason for
Modification:
Vendor change
Other
For AD1
Old part
number
New part
number
Description
08025255
04513008H
For AD1E
Old part
number
08025255
To meet standards
(
)
Qty
Int
Tapping Screw M3x8
11
O/O
New part
number
Description
Qty
Int
04513008H
Tapping Screw M3x8
11
O/O
Page Index Note

7
9
49
101
101
102
Page Index Note

7
9
55
101
101
102
RICOH
Model: AD1
PAGE: 1/1
Date: 31-Jan-99
Modified Article: Drive Section 2
No.: 26
From: GTSS Field Information Dept

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following index numbers should be added.

Old part
number
New part
number
08053480
08050089
11050291
Description
Bushing 6mm
Retaining Ring M4
Harnss Clamp LWS-3S
Qty
Int
Page Index Note

43
43
43
109
110
111
RICOH
PAGE: 1/1
Date: 15-Oct-99
Model: AD1
Modified Article: Sheet - LCD
No.: MA193027
From: Technical Service Dept., GTS Division

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
Please correct the following part descriptions in the AD1 and AD1E parts catalogs.
AD1 (A193) and AD1E (A224)
Part
Description
Number
A1931460
A1931469
LCD Panel (LT)

LCD Panel (A4)
Qty
1
1
Int Page Index

13
13
Note
19
19
Please also add to the following illustration on page 12 (Panel).
4.Operation Panel (A193/A224)
19
RICOH
Date: 15-Jan-00
Model: AD1 & AD1-E

Modified Article: Platen Cover
PAGE: 1/1
No.: MA193028

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following Index Nos. must be corrected. Please correct the part catalog.
AD1
Part number
A1931317
A0531957
AD1-E
Part number
A1931317
A0531957
Description
Platen Cover bracket
Description
Platen Cover bracket
Qty
Old Index No.
1
1
5
6
Qty
Old Index No.
1
1
5
6
New Index No. Page

6
5
11
11
New Index No. Page

6
5
11
11
RICOH
PAGE: 1/1
Date: 15-Jan-00
Model: AD1-E
Modified Article: Paper Exit Section & Frame Section
No.: MA193029
From: GTS Technical Services Dep.

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
1. There are two items indicated as Index No.29 on page 38. The Index No.29 on the left
must be Index No.39 (Exit Tray Holder).
39
29
2. There are two items indicated as Index No.29 on page 54. The Index No.29 on the right
must be Index No.24 (Window Cover).
29
24
3. There are two items indicated as Index No.103 on page 54. The Index No.103 on the
right is the Wire Clamp (its part number is 11050291) and must be corrected to Index
No.104.
Old part
number
New part
number
Description
Qty
11500291
Wire Clamp
103
104
Int
Page Index Note

54
104
RICOH
PAGE: 1/1
Date: 15-Jan-99
Model: AD1
Modified Article: Frame Section
No.: MA193030
From: GTS Technical Services Dep.

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
1. There are two items indicated as Index No.29 on page 48. The Index No.29 on the right
must be Index No.24 (Window Cover).
29
24
2. There are two items indicated as Index No.103 on page 48. The Index No.103 on the
right is the Wire Clamp (its part number is 11050291) and must be corrected to Index
No.104.
Old part
number
New part
number
Description
Qty
11500291
Wire Clamp
103
104
Int
Page Index Note

49
104
RICOH
PAGE: 1/1
Date: 22-Mar-00
Model: AD1
Modified Article: Safety Switch
No.: MA193031

Reason for
Modification:
Vendor change
Other
AD1
Old part
number
New part
number
Description
G0205810
G0205486
G0205808
G0205807
Bracket - Safety Switch

Safety Switch Ass'y
AD1E
Old part
number
New part
number
Description
G0205807
G0205486
G0205808
G0205807
Bracket - Safety Switch

Safety Switch Ass'y
Qty
To meet standards
(
)
Int
Page Index Note

49
49
Qty
Int
3
31
Page Index Note

55
55
3
31
Item10 (Magnet Clutch) is not included in Item 31 and the drawing is corrected as follows.
31
Model: AD1E
PAGE: 1/1
Date: 19-Dec-01
Modified Article: Duplex Tray
No.: MA193032
From: Technical Services Dept., GTS Division

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The following part number is missing. Please correct your part catalog.
Old part
number
New part
number
G6944701
Description
Qty
Duplex Tray
19
Int
Page Index Note

19
19
Model: AD1 ADAM
PAGE: 1/1
Date: 15-May-02
Modified Article: Parts Catalog Correction
No.: MA193033
From: Technical Services sec. Service Planning Dept.

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
Please apply the following P/N correction to your Parts Catalogs.

Old part
number
New part
number
14072948
14074730
Description
IC TC7S04F
IC STK12C68-W45
Qty
1-1
Int
Page Index Note

57
128
Model: AD1 & AD1-E
PAGE: 1/1
Date: 20-Nov-02
Modified Article: Development Dive Shaft
No.: MA193034
From: Technical Services sec. Service Planning Dept.

Reason for
Modification:
Vendor change
Other
To meet standards
(
)
The Drive Shaft and Joint have been modified to minimize noise from the development
drive area.
(For AD1)
Old part
number
New part
number
G0201186
G0201185
G0201047
(For AD1-E)
Old part
number
New part
number
G0201186
G0201185
G0201047
Description
Joint Bracket Development
Drive
Development Drive Shaft
Description
Joint Bracket Development
Drive
Qty
Int
1-0
1-0
0-1
Qty
X/O
Int
1-0
1-0
0-1
X/O
Page Index Note

43
24
43
43
25
25
Page Index Note

49
24
49
49
25
25

Modificaiton Bulletin AF200

Uploaded by

Copyright:

Available Formats

Modificaiton Bulletin AF200

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Modificaiton Bulletin AF200

Uploaded by

Copyright:

Available Formats

MODIFICATION BULLETIN NO.

No serial Number cut-in information

The following should be corrected. Please correct your part catalog.

Upper Registration Roller

Middle Antistatic Bruch - FD

C Ring - Paper Feed Roller

Connector Header - 16P

MODIFICATION BULLETIN NO. 1

3. The descriptions of the following parts have been changed.

Laser Unit (115V)

LD Unit Assy (115V)

Laser Unit (230V)

LD Unit Assy (230V)

LD Unit Assy (230V)

Laser Unit (115V)

LD Unit Assy (230V)

Laser Unit (230V)

4. The following parts have been added.

Harness - Key Counter (LAN)

5. The numbers used of the following parts have been changed.

New Part Number

Bracket - Quenching Lamp

Quenching Lamp Assy

Paper Exit Pawl

Paper Exit Pawl

MODIFICATION BULLETIN NO.

MODIFICATION BULLETIN NO.

MODIFICATION BULLETIN NO.

ISSUED ON: November 15, 96

S. Fujii, General Manager

MODIFICATION BULLETIN NO.

Noserial number cut-in information

The following should be corrected. Please correct your part catalog.

New Part Number

MODIFICATION BULLETIN NO.

S. Fujii, General Manager

MODIFICATION BULLETIN NO. 3

ISSUED ON: January 15 , 97

The following should be corrected. Please correct your part catalog.

New Part Number

Decal - Brand Name (GES)

Decal - Brand Name (NAS)

Decal - Brand Name (REX)

Decal - Brand Name (LAN)

Scanner Home Sensor Stopper

MODIFICATION BULLETIN NO. 3

ISSUED ON: January 15 , 97

New Part Number

MODIFICATION BULLETIN NO.

MODIFICATION BULLETIN NO. 3

T. Fujii, General Manager

Modified Article: Bracket-Finisher

Prepared by: K. Ugaeri

From: QAC 2nd Field Information Dept .

Checked by: S. Fujii

Parts catalog correction

Page Index Note

Modified Article: Paper Exit Sensor

Prepared by: K. Ugaeri