Nano IP Series - Ipn920.
Nano IP Series - Ipn920.
Nano IP Series - Ipn920.
The Nano IP platform is the smallest form factor (2 x 1.25 x .5, weighing only 25 grams) available which offers a full Ethernet/
Serial/USB bridge and routing functionality. The Nano IP OEM module can be directly integrated into OEM systems or applications using a variety of interface options. With the LAN out interface ready to wire directly to CAT5 cable OEMs can integrate
this unit quickly and efficiently. The Nano IP Series also features flexible maintenance utilities, secure firewall features and network management facilities. Robust Frequency Hopping with excellent receiver sensitivity and interference rejection allow for
long range, high speed communications.
Enclosed Solution
VLAN
Rev 1.3
Interface Options
RADIUS
Motherboard Solution
HV Solution
QoS
HTTPS
USB
Firewall
IPn920
Specifications
Frequency
Spread Method
Link Rate
Error Detection
Encryption
Range
Sensitivity
Output Power
100mW - 1W (20-30dBm)
Serial Interface
300bps to 921kbps
USB
USB 2.0
USB Console Port
USB to Serial Data Routing
USB to Ethernet Data Routing
Input Voltage
OEM 3.3VDC Nominal (+/- 0.3V)
Enclosed 7-30VDC
Interface Card 7-30VDC
Power Consumption
(Typical with n920F @
12V with Motherboard)
Connectors:
OEM
Antenna
Data
Enclosed
Antenna
Data
OEM - MMCX
OEM - 60 Pin OEM Header x2
RP-TNC Female Bulkhead
RJ-45 (Ethernet)
Female DB9
Mini-USB
Environmental
Temperature -40oF to 185oF (-40oC to +85oC)
Humidity 5-95%, non-condensing
Weight (Including Radio)
OEM Approx. 25 grams
Enclosed Approx. 250 grams
w/ Interface Board Approx. 70 grams (No Conn. 50g)
Dimensions
OEM Approx. 1.25 x 2.0 x .50
(32mm x 51mm x 13mm)
Enclosed Approx. 2.25 x 3.85 x 1.70
(57mm x 98mm x 43mm)
Ethernet
Network Protocols
Operating Modes
-C1D2
Management
-AES
Diagnostics
-EXP
Rejection
-869
Input IP3
(Antenna Connector)
+12 dBm
IPn920F
IPn920T
115kbps - 230kbps
345kbps - 1.2Mbps
Contact Information
Approvals
Order Options