The document describes a modular desiccant dehumidifier system called the HCD Series. It can be customized with different capacities and configurations. The dehumidifiers use rotors to remove moisture from air and can be used for various industrial applications like clean rooms and manufacturing facilities.
The document describes a modular desiccant dehumidifier system called the HCD Series. It can be customized with different capacities and configurations. The dehumidifiers use rotors to remove moisture from air and can be used for various industrial applications like clean rooms and manufacturing facilities.
The document describes a modular desiccant dehumidifier system called the HCD Series. It can be customized with different capacities and configurations. The dehumidifiers use rotors to remove moisture from air and can be used for various industrial applications like clean rooms and manufacturing facilities.
The document describes a modular desiccant dehumidifier system called the HCD Series. It can be customized with different capacities and configurations. The dehumidifiers use rotors to remove moisture from air and can be used for various industrial applications like clean rooms and manufacturing facilities.
Benefits Weather-tight construction for indoor or outdoor use Low profile cassette design Quick access for easy maintenance Easy duct connections Modulating electric, gas or steam reactivation Multiple blower orientations Optional built-in bypass Add-on post-/pre-air treatment options
The Munters HCD series modular dehumidifier provides end users the essential dehumidification function in capacities of 600 to 12,000 scfm. Along with the basic HoneyCombe rotor-drive-and-seal assembly, HCD offers your choice of process and reactivation fan and either gas, steam or electric reactivation. Customers can integrate the desiccant dehumidifier into their own processes or air conditioning systems, or additional modules can be combined to make an HCD Plus. The HCD Plus provides additional process air filtration, cooling, heating and mixing functions that many end users require. The HCD Plus arrangment is skid-mounted, providing a single source, factory assembled package. These modular dehumidifiers are used in a wide variety of applications from clean room humidity control to chocolate coated candy and central dry air systems for pharmaceutical manufacturing. Munters Corporation, Air Treatment Division Phone +1 800 843 5360 / E-mail dhinfo@munters.com / munters.us
HCD Series
HCD Series Modular Desiccant Dehumidifiers
HCD Series Standard Technical Specifications and Advanced Features
Typical ESP (in. W.G.)
Nominal SCFM
Moisture Removal (lbs/hr) at 75F, 50% RH
General Dimensions L x W x max H (in.)
General Weight (lbs.)
Process
React
600
16
76 x 31 x 56
400
3.5
2.75
1,125
30
130 x 37 x 72
925
3.5
1.4
2,250
60
146 x 47 x 80
1,150
3.75
1.65
4,500
120
146 x 66 x 98
2,050
2.5
2.3
9,000
240
169 x 85 x 112
3,100
1.9
0.8
Utilities: 208, 230, 460 or 575 volts
Reactivation Heaters: EA-Electric: 208-575 volts SA-Steam: 10-150 psig GA/DGA-Gas: Natural or propane 4.5 to 14 W.G. pressure Reactivation Filter: Permanent and washable Electric Controller: NEMA 4 Installation: Indoor or outdoor Options: On/off or modulating humidity control, internal or external bypass, skids, weatherhoods, pre- and post-air treatment modules can include filtration, cooling and heating
Dimensions and weight are approximate
HCD-Plus (HCD Dehumidifier with Add-on Modules)
Reactivation Heater
Dehumidifier Wheel/Cassette
Reactivation Fan
HCD Series Advanced Features
Contact Air Seals: Separate process and reactivation air at pressures up to 8 W.G. with a five year life expectancy. Process & Reactivation Fans: Centrifugal, direct drive with totally enclosed fan cooled motors. Electrical Controls: Continuous automatic operation including motor starters, overload protective devices, microprocessor with indicating lights and fault circuits. All wiring to NEC codes. Drive System: Simple, self-tensioning drive belt arrangement, few moving parts.
Process Air Blower Plenum
The process air blower plenum is insulated to avoid condensation when process air temperature is below the dewpoint of surrounding air. Also, the process air blower plenum provides in-line airflow to the mixing box, coil module or ductwork. Mixing Plenum The mixing plenum allows incoming air to be mixed with up to four other incoming air streams. Manual dampers are provided to balance the airflows. The mixed air stream can then be further conditioned by downstream modules.
Post-Heat/Cool Coil Plenum
Pre-Heat/Cool Coil Plenum
The coil plenum is designed to house a maximum of 10 rows of coils for direct expansion refrigeration, chilled water, hot water, steam or combinations to provide pre- or post-cooling or heating. Alternatively, electric heating elements can also be housed in this plenum. The maximum face velocity is 500 fpm for cooling coils and 900 fpm for heating coils/elements.
Face and Bypass Plenum
The face and bypass plenum provides 100% bypass capabilities. Face and bypass dampers of low leakage design are operated by proportioning actuators.
Filter Plenum, 30%
Filter Plenum, High Efficiency
A disposable filter of 30% efficiency has slide rails that provide easy access for maintenance. A disposable, high efficiency filter of up to 95% (combined with disposable 30% efficiency pre-filter) has slide rails that provide easy side access for maintenance. Consult factory for HEPA filters and plenums.
Reactivation Utility: Electric with solid state proportioning control, steam with proportional air volume control or gas (direct/indirect) with modulating gas valve. Dehumidifier Housing: Process and reactivation air flow insulation. Durable airdry polyurethane paint. All welded aluminum cabinet. Desiccant Rotor: In the 1950s, Munters invented modern industrial dehumidification when it introduced the self-regenerating desiccant rotor, the heart of the dehumidifier.
Skid A structural aluminum skid of C channel design is between 6 to 10 in height. On smaller units, with shorter lead times, formed steel can be utilized.
Australia Munters Pty Limited, Phone +61 2 6025 6422, Fax +61 2 6025 8266, Austria via sales organization in Germany, Brazil Munters Brasil Industria e Comercio Ltda, Phone +55 41 3317 5050, Fax +55 41 3317 5070, China Munters Air Treatment Equipment (Beijing) Co., Ltd., Phone +86 10 80 481 121, Fax +86 10 80 483 493, Denmark via sales organization in Sweden, Finland Munters Oy, Phone +358 9 83 86 030, Fax +358 9 83 86 0336, France Munters France S.A., Phone +33 1 34 11 57 50, Fax +33 1 34 11 57 51, Germany Munters Euroform GmbH, Phone +49 241 89 00 0, Fax +49 241 89 00 5199, Indonesia Munters, Phone +62 21 9105446-7, Fax +62 21 5310509, Italy Munters Italy S.p.A., Phone +39 0183-52 11, Fax +39 0183-521 333, Japan Munters K.K., Phone +81 3 5970 0021, Fax +81 3 5970 3197, Kingdom of Saudi Arabia and Middle East Hawa Munters, c/o Hawa United Cooling Syst. Co. Ltd., Phone +966 1 477 15 14, Fax +966 1 476 09 36, Korea Munters Korea Co,. Ltd, Phone +82 2 761 8701, Fax +82 2 761 8777, Mexico Munters Mexico Phone +52 722 270 40 30, Fax +52 722 270 41 95, Norway via sales organization in Sweden, South Africa and Sub-Sahara Countries Munters (Pty) Ltd, Phone +27 11 997 2000, Fax +27 11 608 3501, Spain Munters Spain S.A., Phone +34 91-640 09 02, Fax +34 91-640 11 32, Sweden Munters Europe AB, Phone +46 8 626 63 00, Fax +46 8 754 56 66, Switzerland via sales organization in Germany, Thailand Munters (Thailand) Co. Ltd., Phone +66 2 645 2708-12, Fax +66 2 645 2710, United Kingdom Munters Ltd, Phone +44 845 644 3980, Fax +44 845 644 3981, United States Munters Corporation , Phone +1 800 843 5360, Export & other countries Munters, Phone +46 8 626 63 00, Fax +46 8 754 56 66.
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial
