Zedprogmanual PDF

ZEDPROG
USER MANUAL
STANBUL ELEKTRONK ANAHTAR
Version 1.4
Istanbul, May 2010
1
CONTENTS
Page
1. Zed-Prog and Hardware Features.............................................................................3

2. Zed-Prog Usage............................................................................................................5
3. Zed-Prog Update.........................................................................................................7
4. Loading dump file to Pc software using Zed-Prog...................................................9
5. EEPROM and MCU Applications List...................................................................12
6. Zed Prog EEPROM and MCU Packs.................................................................15
7. Zed Prog EEPROM and MCU Adapters............................................................17
8. Zed-Prog EEPROM Applications...........................................................................22
9. Zed-Prog Processor Applications............................................................................80
10. Appendix................................................................................................................126
1. Zed-Prog and Hardware Features

Zed-Prog:
Zed-Prog is a tool which can read Eeproms and Processors without removing most of them from
circuit board. It does not need PC connection to operate, it is used with Zed-BULL transponder
programmer. Zed-Prog, can read most of the processors and the Eeproms which Zed-BULL Eeprom
applications have, moreover for most of the modules there is no need for chip removal, it can read
the content of the Eeprom or the processors with a help of test clip. Zed-Prog now can read most of
the processor applications of Zed-BULL Eeprom & Mcu Software.
Zed-Prog Hardware:
Details of Zed-Prog hardware is given below:
1. Update button
2. Communication status leds
3. Status led
4. Clips connection socket
5. On/off button
6. Power in jack
7. Zed-Bull & Zed-Prog connection socket
8. Zed-Prog & PC connection socket(USB)
9. Zed-Bull & Zed-Prog connection cable
10. Zed-Bull connection tip
11. Zed-Prog connection tip
12. Zed-Bull & PC connection(USB) cable
13. PC connection tip
14. Zed-Prog connection tip
15. Zed-Prog EEPROM clips
Zed-Prog Hardware:
2. Zed-Prog Usage
Zed-Prog can only be used with Zed-BULL transponder programmer device. First Zed-BULL
connection should be done to work with Zed-Prog. Please see the figure 2.1 below to see the ZedProg and Zed-BULL connection.
Figure 2.1 Zed-Prog & Zed-Bull Connection

Warning 1: While making connections of Zed-Prog, On/off button should be in off position.
Warning 2: To read chips without removal, power should be connected to Zed-Prog(Zed-prog can
be feed by Zed-BULL).
After Zed-Prog is connected to Zed-BULL, before turning Zed-Prog on, test clip should be
connected to Zed-Prog and to the chip to be read as well.
Figure 2.2 Connecting Clip to the chip

Warning 3: It is highly recommended to make connections of Zed-Prog when it is off. You can
make connections when it is on, but this may cause unwanted short circuits on the hardware and
may cause serious damages.

Zed-Prog Eeprom test clips has 7 black and 1 red connection wire edges. Red edge represents first
reader pin of the test clips and it should be aligned with the first pin of the Eeprom. The tips for
finding first pin of the Eeproms are explained with details in each module description. Again with
the processor clips first pin should be aligned with the red edge of the clip. Detailed information
about Zed-Prog MCU Adapters has been given in Section 7.
After all connections are obtained, now it is safe to turn Zed-Prog on. When Zed-Prog is on status
led will flash quickly. When Zed-prog is on, Zed-Prog menu should be selected in Zed-BULL main
menu. An then software pack and type of IC is selected. Zed-BULL screen will tell the user what to
do in each step.
Figure 2.3 Choosing chip type in Zed-BULL menu

After read process is completed, Zed-Prog should be turned of and the clip should be removed from
the chip.
Important:
Most of the modules with Eeprom can be read without chip removal. But some of the modules with
processor can only be read with chip removal. This manual tells you which modules can be read in
circuit and which modules can be read with chip removal. Please see the explanations for each
module. While reading processors please follow the instructions exactly as it is described and read
the motes for each module carefully. Do not try to read the chips in circuit, which should be
removed and read.
3. Zed-Prog Update
Before starting updating Zed-Prog, connect Zed-Prog to PC via USB cable. Then make sure that
on/off button is off and plug-in the Zed-Prog power adapter. The connection configuration is shown
in figure 3.1 below
Figure 3.1 Zed-Prog power in and usb connection

While Zed-Prog on/off button is in off position, press update button and hold your finger on it, turn
on the on/off button, status led should flash, Rx and Tx leds will turn on and then turn off, finally
status led will turn on and will stay on solid. Now you can release your finger and Zed-Prog is in
loader mode.
Ow run Zed-BULL PC software, do not click connect, go to setting >> Module update and choose
Zed-Prog as the module.
Settings >> Update >> Module update
F
Figure 3.2 Updating Zed-prog from Zed-BULL pc software
Choose Zed-prog as module. Click open file and choose the Zed-Prog update file with .zpp
extension. Click update button, Zed-prog will be updated.
Figure 3.3 Update steps
Figure 3.4 Update status screen

After update process is successful, following warning screen will appear.
Figure 3.5 Update result information screen
4. Saving read EEPROM file to your Pc using Zed-BULL PC Software

Zed-Bull and Zed-Prog are sufficient to do EEPROM applications. However, one may need to copy
the EEPROM data to the computer in certain situations. When this is the case, Zed-Prog should be
turned-off after the EEPROM is read. Subsequently, Zed-Prog should be connected to the computer
via USB cable. Also power adapter should be connected. Connections are shown in Figure 4.1.
Figure 4.1 Zed-Prog Power in jack and usb connection
Once the connections are done properly, Zed-Prog can be turned-on. After the device is powered,
the status LED will start flashing rapidly. After Zed-Prog is configured, Zed-Bull computer
program is to be opened. From the program select Zed-Prog from the Help menu.
Extended Functions >> Zed-PROG
Figure 4.2 Choosing Zed-Prog from Zed-Bull Pc Software
After clicking Zed-Prog, following window will appear:
Figure 4.3 Zed-Prog Window

From the Zed-Prog window, select the EEPROM type from the left frame and click READ button
in Figure 4.4. EEPROM 24c02 is selected as an example. After clicking READ button you should
see a screen as in Figure 4.4. The EEPROM data is provided in the wide area on the right hand side
while the EEPROM is read status notification will appear in the bottom left corner of the window.
Figure 4.4 Zed-Prog window after successful read

In order to save the read EEPROM file, select Save from the File menu.
File >> Save
10
Figure 4.5 Saving File

Once Save option is selected a window should appear. The file is saved after the name and the
directory of the file is entered. It is vital that file extension is selected as .BIN
Figure 4.5 Save file options
11
5. Zed-Prog EEPROM and MCU Applications List

1 Opel immo2 - Siemens immobox
2 VW, Seat immo2 - Siemens immobox
3 VW, Seat immo3 - Valeo immobox
4 Fiat,Lancia,Citroen,Peugeot - Delphi immobox
5 Opel immo1 - Siemens immobox
6 Honda, Acura immobox
7 Honda, Rover - Valeo immobox
8 Fiat, Lancia - imm001.01 magneti marelli immobox
9 Fiat, Lancia - imm110.01 magneti marelli immobox
1 .Mercedes Sprinter, Vito, Vw volt - Temic immobox
11 Fiat, Alfa Romeo, Lancia - magneti marelli BSI
12 Fiat, Citroen, Peugeot code2 - Delphi immobox
13 VW,Skoda,Seat immo1 - Siemens immobox
14 Fiat, Citroen, Peugeot, Iveco code3 - Magneti marelli BSI
15 Daihatsu - immobox 1998-2000
16 Renault, Dacia, Opel - Sagem immobox
17 Renault, Dacia - Siemens UCH
18 Fiat, Lancia, Alfa romeo - Delphi BSI
19 Peugeot, Citroen, Valeo - immobox
20 Toyota, Daihatsu - immobox 1998-99
21 Volvo immo3 - Bosch immobox
22 Toyota - Bosch, Fujitsu ECU
23 Toyota, Rav4 - Denso, Fujitsu ECU
24 Toyota - immobox
25 Renault Laguna2 - Sagem UCH
26 Mercedes TIR - Temic ECU
27 Renault Megane2, Scenic2 - Siemens UCH
28 Alfa Romeo Code2 - Bosch immobox
29 Mitsubishi - Bosch immobox
30 BMW, Range Rover, Mini Cooper - EWS1
33 Iveco Daily, Iveco Truck - Bosch immobox
34 Renault - Valeo immobox
35 Alfa Romeo, Iveco - Bosch immobox
36 Suzuki - immobox
12
37 Toyota - ECU
38 Volvo, Mitsubishi - Bosch immobox
39 Toyota - Denso ECU
40 Nissan, Subaru - Siemens immobox
41 Peugeot motorbike - Marelli immobox
42 Renault - Sagem UCH
43 Peugeot - Siemens BSI
44 Peugeot - Siemens BSI
45 Audi - Delphi immobox
46 Peugeot, Fiat, Lancia, Citroen - Texton immobox
47 Chrysler, Jeep, Dodge - SKIM immobox
48 Mazda, Ford - Temic immobox
49 Suzuki, Mitsubishi - immobox
50 Peugeot, Fiat, Citroen - immobox
51 Toyota - immobox
52 Nissan - Siemens immobox(NATS-4)
53 Volvo - Bosch immobox
54 Daewoo - immobox
55 Opel, Isuzu - immobox
56 Renault - Siemens immobox -98
57 Fiat - Delphi BSI
58 Ford - immobox
59 Ford - immobox
60 Mazda - Lucas immobox
61 Ford - Visteon Dashboard
62 Ford - Visteon ECU
63 Ford, Mazda - Siemens ECU
64 Fiat, Lancia - IMM100.01 Magneti marelli immobox
65 Fiat - Siemens BSI
66 Renault - Siemens UCH
67 Acura immobox
68 BMW, Range Rover, Mini Cooper EWS4
69 Yamaha - Moric immobox
70 Renault, Opel - Sagem UCH
71 Opel, Isuzu - immobox
72 Suzuki - Denso immobox
73 Ducati bike - Magneti Marelli Dashboard immobox
74 Honda bike - immobox
13
75 Honda bike - immobox

76 Honda bike immobox
77 Renault - Johnson UCH
78 Aprilla scooter Dashboard
79 Mazda - Denso ECU
80 Mazda - Mitsubishi ECU
81 Peugeot, Citroen BSI
82 Chery immobox
83 Ford - Delphi ECU
84 Renault - Valeo BSI
85 Toyota - Valeo immobox
86 Nissan - Siemens immobox(NATS-5)
87 Hyundai immobox
88 Ducati motorbike - Digitek dashboard
89 Nissan Dashboard
90 Chevrolet - Siemens UCH
14
5. Zed-Prog EEPROM and MCU Packs

EEPROM PACK(STANDART PACKAGE):
All modules with Eeprom (Total 54 Modules)-Almost all of them can be read in circuit
PACK 1 :
Module 8 : Fiat, Lancia Magnetti Marelli -> Bravo(1998-2001), Marea(1998-), Palio(-1999)Read incircuit
Module 50: Peugeot,Fiat, Citroen -> 306, Expert, Ranch-Read incircuit
Module 51: Toyota -> Avensis-Read with chip removal
Module 85: Toyota - Valeo immobox-Read with chip removal
PACK 2 :
Module 30: BMW, Range Rover, Mini Cooper -EWS1-Read with chip removal
Module 31: BMW, Range Rover, Mini Cooper -EWS2-Read with chip removal
Module 32: BMW, Range Rover, Mini Cooper -EWS3-Read incircuit
PACK 3 :
Module 5: Opel immo1- Siemens ->Astra F, Calibra, Combo B, Omega(1996-1999),Sintra(-1999),
Tigra,Vectra B-Read with chip removal
Module 7: Honda Rover Valeo -> Accord(-1999),Civic(-2001)-Read with chip removal
Module 13: VW, Skoda,Seat immo1-Siemens -> Caddy(-1998,Golf 3, Passat 3, Polo3(-1998),
Transporter(-1998), Vento-Read in circuit
Module 40: Nissan, Subaru Siemes -> Primer(-1998), Serena(-1998), Sunny, Terrano2(-1998),
Vannete(-1998)-Read with chip removal
Module 44: Peugeot -Siemens BSI -> 206(1998-2001)-Read with chip removal
Module 54: Daewoo -> Espero, Lanos(-2002), Leganza(-2000), Matiz(-2001), Nexia,
Nubira(-2000)-Read with chip removal
Module 56: Renault Siemens immobox-98 -> Megane(-1999), Twingo(-2000)-Read with chip
removal
Module 60: Mazda Lucas -> 323(-1999), 626(-1999), MX-5-Read with chip removal
Module 66: Renault Siemens UCH -> Megane, Scenic-Read with chip removal
Module 90: Chevrolet - Siemens UCH - Read with chip removal
15
PACK 4 :
Module 11: Fiat, Alfa Romeo, Lancia - magneti marelli BSI - Read in circuit
Module 25: Renault Laguna2 - Sagem UCH
Module 27: Renault Megane2, Scenic2 - Siemens UCH
Module 61: Ford - Visteon Dashboard
Module 65: Fiat - Siemens BSI
Module 68: BMW, Range Rover, Mini Cooper - EWS4
Note: In Pack-4, only Module 11 can be read with Version 01.04 01.06. The other modules of this
pack are going to be added in next versions.
PACK 5 :
Module 1: Opel immo2 - Siemens immobox-Read with chip removal
Module 2: VW, Seat immo2 - Siemens immobox-Read with chip removal
Module 52: Nissan - Siemens immobox(NATS-4)
Module 58: Ford - immobox-Read with chip removal
Module 59: Ford - immobox-Read with chip removal
Module 86 : Nissan - Siemens immobox(NATS-5)
PACK 6:
Module 9: Fiat, Lancia - imm110.01 magneti marelli immobox-Read with chip removal
Module 10: Mercedes Sprinter, Vito, Vw volt - Temic immobox-Read with chip removal
Module 41: Peugeot motorbike - Marelli immobox-Read with chip removal
Module 47: Chrysler, Jeep, Dodge - SKIM immobox-Read with chip removal
Module 64: Fiat, Lancia - IMM100.01 Magneti marelli immobox-Read with chip removal
Module 82: Chery immobox-Read with chip removal
Module 84: Renault - Valeo BSI-Read with chip removal
16
7. Zed Prog EEPROM and MCU Adapters:

EEPROM Pack:
Small EEPROM Adapter: Using this adapter, small pack EEPROMs can be read either in circuit or
with chip removal.
Big EEPROM Adapter: Using this adapter, big pack EEPROMs can be read either in circuit or with
chip removal.
General Purpose EEPROM Adapter:

Using this adapter, small and big pack
EEPROMs can be read with chip removal. Also,
TSSOP8 pack EEPROM which is available on
module 14 can be read.
Be careful with the direction of the EEPROMs.
17
Pack 1 :
Using this adapter, the processors of pack1 modules can be read in circuit or with chip removal. Be
careful with the direction of the MCUs. The detailed information has been given in section 9.
Please read this information before doing application.
Pack 2 :
Using the adapter is shown below, the processors of pack 2 modules can be read with chip removal.
Be careful with the direction of the MCUs. 2D47J mask numbers processors can not be read
with this adapter. The detailed information has been given in section 9. Please read this information
before doing application.
18
Using the adapter is shown below, EWS3 Module(Module 32) processor can be read in circuit. The
processor need to be cleaned very well, before reading. Be careful with the direction of the
MCUs.2D47J mask numbers processors can not be read with this adapter.
Pack 3 :
Using this adapter, the processors of pack 3 modules can be read in circuit or with chip removal.
Be careful with the direction of the MCUs. The detailed information has been given in section 9.
Please read this information before doing application.
19
Pack 4 :
Using this adapter, the processors of pack 4 modules can be read in circuit or. By soldering only
four wires, applications can be done. The detailed information and photos have been given in
section 9. Please read this information before doing application.
Pack 5 :
Using the adapter is shown below, the 28 pins processors of pack 5 modules can be read with chip
removal.
Be careful with the direction of the MCUs:
20
Pack 6 :
Using the adapter is shown below, the 28 pins processors of pack 6 modules can be read with chip
removal. On top side 05B/X processors can be read, and on bottom side 08AZ/AB processors can
be read. Be careful with the direction of the MCUs.
The detailed information has been given in section 9. Please read this information before doing
application.
Top Side:
Bottom Side:
21
8.
Zed-Prog
EEPROM
APPLICATIONS
22
Module 3:
VW, Seat immo3 - Valeo immobox
24c04
8pins, 512 Bytes
VW,SEAT
ID:
44
Transponder
Type: Blank PCF7935
Programmed
transponder will start the vehicle
Note: Eeprom can be read in circuit in this module. Eeprom pins should be clear for good
conductivity.
23
If there are components which are indicated in rectangle on the back side of the board, the floating
wire in the test clip should be short circuited to the crystal pin which is indicated in circle.
24
Module 4:
Fiat,Lancia,Citroen,Peugeot - Delphi immobox
93c46
8pins, 128 Bytes
Fiat,Lancia,Citroen
ID:
Jumper/Relay,Peugeot Boxer
13
Transponder
Type: T5
Programmed
conductivity.
25
Module 6:
Honda, Acura immobox
93c46
8pins, 128 Bytes
Honda,Acura
ID:
13
Transponder
Type: T5
Programmed
transponder will start the vehicle.
conductivity.
26
Module 12:
Fiat, Citroen, Peugeot code2 - Delphi immobox
93lc56b
Fiat
ID:
8pins, 256 Bytes
Ducato2,Citroen Jumper/Relay 2
48
Transponder
Type: Megamos Crypto
Programmed
transponder and created image file will start the vehicle.
conductivity.
27
Module 14:
Fiat, Citroen, Peugeot, Iveco code3 - Magneti marelli BSI
95c160/95c320
Ducato3,
ID:
8pin(SSOP), 2048/4096 Bytes
Boxer3, Jumper3, Daily
48
Transponder
Programmed
transponder should be programmed into vehicle with a diagnostic tool with the
calculated pin code.
Not: This module has TSSOP8 pack EEPROM. EEPROM has to be removed and read by adapter is
shown below.
28
Module 15:
Daihatsu - immobox 1998-2000
93lc66
8 pin(dip), 512 Bytes
Daihatsu
ID:
4C
Transponder
Type: Jma TPX1, Silca Electronic head
Programmed
conductivity.
29
Module 16:
Renault, Dacia, Opel - Sagem immobox
93c46/93c56
Dacia,
ID:
8pin, 128/256 Bytes
Opel movano, Renault master
33
Transponder
Type: T5 or PCF7930/31/35
Programmed
30
conductivity.
31
Module 17:
Renault, Dacia - Siemens UCH
93c66
clio,
ID:
8pin, 512 Bytes
symbol, logan, sandero, solenzo
46
Transponder
Programmed
Type: Blank PCF7936

transponder should be programmed into vehicle using a diagnostic tool with
calculated pin code
32
Module 18:
Fiat, Lancia, Alfa romeo - Delphi BSI
93c66b
8pin, 512 Bytes
Doblo,
Albea, Alfa 156, Punto
ID:
48
Transponder
Programmed
transponder and created image file will start the vehicle.
conductivity.
33
Module 19:
Peugeot, Citroen, Valeo - immobox
93c46
8pin, 128 Bytes
Berlingo,
ID:
406
33
Transponder
Programmed
conductivity.
34
Module 20:
Toyota, Daihatsu - immobox 1998-99
93c66
8pin, 512 Bytes
Corolla,Camry,Hilux,Daihatsu
ID:
4C
Transponder
Programmed
35
Module 20:
conductivity.
36
Module 21:
Volvo immo3 - Bosch immobox
93c56/93c66
cars
ID:
8pin, 256/512 Bytes
and trucks
44
Transponder
Type: Blank PCF7935
Programmed
conductivity.
37
Module 22:
Toyota - Bosch, Fujitsu ECU
24c02/25020/25040
Corolla,
ID:
8pin, 256/256/512 Bytes
Yaris
4C
Transponder
Type: Jma TPX1, Silca Electronic Head
Programmed
38
Module 23:
Toyota, Rav4 - Denso, Fujitsu ECU
95080/93c86/25080
Corolla,
ID:
8pin, 1024/2048/1024 Bytes
Yaris, Camry
4C
Transponder
Type: Jma TPX1, Silca Electronic Head
Programmed
39
Module 24:
Toyota - immobox
24c04
8pin, 512 Bytes
Corolla,
ID:
Yaris, Camry
4C
Transponder
Programmed
Note: Eeprom can be read in circuit in this module, but the free wire in the test clip should be short
circuited to the crystal in the circuit board as in the picture above. Eeprom pins should be clear for
good conduction.
40
Module 26:
Mercedes truck - Temic ECU
93C56/93c66/93c86
Actros,
ID:
8pin, 256/512/2048 Bytes
Atego, Axor
13
Transponder
Type: T5
Programmed
41
Module 28:
Alfa Romeo Code2 - Bosch immobox
93c56
8pin, 256 Bytes
146
ID:
44
Transponder
Type: Blank PCF7935
Programmed
42
Module 29:
Mitsubishi - Bosch immobox
93c56
8pin, 256 Bytes
Carisma,
ID:
Space Star
44
Transponder
Type: Blank PCF7935
Programmed
43
Module 33:
Iveco Daily, Iveco Truck - Bosch immobox
93c56
Iveco
ID:
8pin, 256 Bytes

Daily,Iveco Truck
46
Transponder
Type: Blank PCF7936
Programmed
transponder should be programmed into the vehicle using a diagnostic tool with
the calculated pin code
44
Module 34:
Renault - Valeo immobox
93c46
8pin, 128 Bytes
Laguna1
ID:
33
Transponder
Programmed
45
Module 35:
Alfa Romeo, Iveco - Bosch immobox
93c46
145,
ID:
8pin, 128 Bytes
iveco
33
Transponder
Programmed
46
Module 36:
Suzuki - immobox
93lc66
8pin, 512 Bytes
Swift
ID:
4C
Transponder
Programmed
47
Module 37:
Toyota - ECU
25080/95080
Corolla,
ID:
8pin, 1024/1024 Bytes
Yaris
4C
Transponder
Programmed
conductivity.
48
Module 38:
Volvo, Mitsubishi - Bosch immobox
93c46
8pin, 128 Bytes
Carisma
ID:
33
Transponder
Programmed
Note: Eeprom can be read in circuit in this module, Eeprom pins should be clear for good
conduction.
49
Module 39:
Toyota - Denso ECU
93c56
8pin, 256 Bytes
Corolla
ID:
4C
Transponder
Programmed
50
Module 42:
Renault - Sagem UCH
93c66,
Clio
ID:
8pin, 512 Bytes
hb
46
Transponder
Type: Blank PCF7936
Programmed
calculated pin code
51
Module 43:
Peugeot - Siemens BSI
93c66,
8pin, 512 Bytes
406
ID:
45
Transponder
Type: Blank PCF7935
Programmed
52
Module 45:
Audi - Delphi immobox
93c46,
8pin, 128 Bytes
Audi
ID:
13
Transponder
Type: T5
Programmed
53
Module 46:
Peugeot, Fiat, Lancia, Citroen - Texton immobox
93c66/95040,
306,
ID:
8pin, 512 Bytes
Scudo
33
Transponder
Programmed
54
Module 47:
Chrysler, Jeep, Dodge - SKIM immobox
Motorola
MC68HC08AB16A(L72A)/MC68HC08AZ32(J66D)/24c02,
512/512/256 Bytes
Chrysler,Jeep,Dodge
ID:
64
Transponder
Programmed
55
64pin/64pin/8pin,
Module 49:
Suzuki, Mitsubishi - immobox
24c01,
8pin, 128 Bytes
Grandvitara,
ID:
Lancer, Pacero, Galand
4C
Transponder
Programmed
56
Module 53:
Volvo - Bosch immobox
93C46,
8pin, 128 Bytes
Volvo
ID:
33
Transponder
Programmed
57
Module 55:
Opel, Isuzu - immobox
93c46,
8pin, 128 Bytes
Frontera,
ID:
Trooper
13
Transponder
Type: T5
Programmed
conductivity.
58
Module 57:
Fiat - Delphi BSI
93c86,
8pin, 2048 Bytes
Grande
ID:
punto
46
Transponder
Type: Blank PCF7936
Programmed
conductivity.
59
Module 62:
Ford - Visteon ECU
95040,
8pin, 512 Bytes
Focus,Fusion,Mondeo,Transit
ID:
60
Transponder
Programmed
Note: The Eeprom which is shown above can be read in circuit in this module. Eeprom pins should
be clear for good conductivity.
60
Module 63:
Ford, Mazda - Siemens ECU
93C56/93C86,
8pin, 256/2048 Bytes
Mazda2,Fiesta
ID:
63
Transponder
Tipi: Jma TPX2, Silca Electronic head
Programmed
conductivity.
61
Module 67:
Acura - immobox
93C46,
8pin, 128 Bytes
Acura
ID:
13
Transponder
Type: T5
Programmed
62
Module 69:
Yamaha - Moric immobox
Seiko
S29190, 8pin, 128 Bytes
Yamaha
ID:
62
Transponder
Programmed
conductivity.
63
Module 70:
Renault, Opel - Sagem UCH
93c66,
8pin, 512 Bytes
Vivaro,
ID:
Movano, Kango, Trafic,Master
46
Transponder
Calculated
Type: PCF7936
pin code can be used while programming transponder with a diagnostic tool
64
Module 71:
Opel, Isuzu - immobox
93C46,
8pin, 128 Bytes
Frontera,
ID:
Trooper
48
Transponder
Programmed
transponder and created image file will start the vehicle
conductivity.
65
Module 72:
Suzuki - Denso immobox
93C66,
8pin, 512 Bytes
Suzuki
motorbike
ID:
62
Transponder
Programmed
66
Module 73:
Ducati bike - Magneti Marelli Dashboard immobox
24c16,24c02,
Ducati
ID:
8pin, 2048/256 Bytes
motorbike
11
Transponder
Type: T5
Programmed
67
Module 74:
Honda bike - immobox
93c46,
8pin, 128 Bytes
Honda
motorbike
ID:
46
Transponder
Type: Blank Pcf7936
Programmed
transponder andcreated image file will start the vehicle
68
Module 75:
93c56,
8pin, 128 Bytes
Honda
motorbike
ID:
46
Transponder
Type: Blank Pcf7936]
Programmed
transponder and createdimage file will start the vehicle
conductivity.
69
Module 76:
93c66,
8pin, 128 Bytes
Honda
motorbike
ID:
46
Transponder
Type: Blank Pcf7936
Programmed
conductivity.
70
Modl 77:
Renault - Johnson UCH
95160, 8pin, 2048 Bytes
Clio3, Modus
ID: 46
Transponder Type: Blank Pcf7946/47 - 2 buttons remote key
Programmed transponder and created image file will start the vehicle
71
Modl 78:
Aprilla scooter - Dashboard
24c01,24c16 8pin, 128/2048 Bytes
Aprilla
ID: 12
Transponder Type: T5
Programmed transponder will start the vehicle
72
Modl 79:
Mazda - Denso ECU
93c56 8pin, 256 Bytes
323, 626
ID: 8C
Transponder Type: Blank 8C
Calculated pin code can be used while programming transponder manually
Note: The Eeprom which is shown above can be read in circuit in this module. Eeprom pins should
be clear for good conductivity.
73
Modl 80:
Mazda - Mitsubishi ECU
323, 626
ID: 8C
Transponder Type: Blank 8C
Calculated pin code can be used while programming transponder manually
74
Modl 81:
Peugeot, Citroen - BSI
95c160 8pin, 2048 Bytes
206, 307, Berlingo
ID: 46
Transponder Type: Blank PCF7936
Calculated pin code can be used while programming transponder with a diagnostic tool
75
Modl 83:
Ford - Delphi ECU
95c160 8pin, 2048 Bytes
Focus, KA
ID: 4C
Transponder Type: Jma TPX1, Silca Electronic head
76
Modl 87:
Hyundai - immobox
93c56, 8pin, 256 Bytes
Galopper, Atos(99), H200
ID: 4C
77
Modl 88:
Ducati motorbike - Digitek dashboard
848
ID: 12
Transponder Type: T5
78
Modl 89:
Nissan - Dashboard
Sunny, Almera classic
ID: 46
Programmed transponder and created image file will start the vehicle
79
9.
Zed-Prog
MCU (PROCESSOR)
APPLICATIONS
80
Module 1:
Opel immo2 - Siemens immobox
TMS370C702
Agila,
ID:
28pin, 256 Bytes
AstraG, Combo, CorsaC, Meriva, Omega, Sintra, VectraB, Tigra, Zafira
40
Transponder
Type: Blank PCF7935
Programmed
MCU Pack : PACK 5

This processor can not be read in circuit. Processor should be removed and put to the adapter.
Please be careful with the direction and processor pins should be clean.
81
Module 2:
VW, Seat immo2 - Siemens immobox
TMS370C702
28pin, 256 Bytes
VW,SEAT
ID:
42
Transponder
Type: Blank PCF7935
Programmed
MCU Pack : PACK 5

82
Module 5:
Opel immo1 - Siemens immobox
Motorola
MC68HC05B6(F10V-B91T-D33J) 52pin, 256 Bytes
OPEL
ID:
33
Transponder
Programmed
MCU Pack : PACK 3

This processor can not be read in circuit. Processor should be removed and put to the clip. Please be
careful with the direction and processor pins should be clean.
83
Module 7:
Honda, Rover - Valeo immobox
Motorola
Honda,Rover600
ID:
33
Transponder
Programmed
MCU Pack : PACK 3

This processor can not be read in circuit. Processor should be removed and put to the clip. Please be
careful with the direction and processor pins should be clean.
84
Module 8:
Fiat, Lancia - imm001.01 magneti marelli immobox
Motorola
MC68HC05E6(F82B-G72G) 28pin, 160 Bytes
Fiat,Lancia
ID:
11
Transponder
Type: T5
Programmed
MCU Pack : PACK 1

This module can be read in circuit with pack 1 clip. To read the chip in circuit first pin of the
processor should be disconnected from the circuit board. To disconnect the pin, the resistor(473 is
written on it) should be removed from the circuit board, this resistor is located at the back side of
the circuit board. Another option is to cut the line which continues through this resistor. Do not
forget to put back the resistor, or connect the way which is cut, after completing the read process.
Processor can be read by removing it from the circuit board and putting to the reader clip as well.
Important: While putting the processor to the reader clip, Zed-Prog should be off. Be careful with
the direction of the processor. Processor pins should be clean.
See the figure below to see disconnecting the resistor from the board for in circuit reading.
85
86
Module 9:
Fiat, Lancia - imm110.01 magneti marelli immobox
Motorola
MC68HC908AZ32(J66D) 64pin, 512 Bytes
Fiat,Lancia
ID:
11
Transponder
Type: T5
Programmed
MCU Pack : PACK 6

This processor can not be read in circuit. Processor should be removed and soldered the adapter.
Please be careful with the direction of MCU.
87
Module 10:
Mercedes Sprinter, Vito, Vw volt - Temic immobox
Motorola
MC68HC05X16(D62J)/AZ32(L52H-J66D) 64 pin, 256/512 Bytes
Mercedes
Sprinter,Vito,vw Volt
ID:
12
Transponder
Type: T5
Programmed
MCU Pack : PACK 6

88
Module 11:
Fiat, Alfa Romeo, Lancia - magneti marelli BSI
Motorola
Doblo,
ID:
MC68HC912DG128(3K91D)/MC9S12DP256(1K79X) 112pin, 2048/4096 Bytes
Albea, Alfa 156
48
Transponder
Programmed
MCU Pack : PACK 4

This module can be read in circuit with pack 4 clip. This module has three types board which shown
below. Cutting the indicated way and soldering the cables to the right points are very important.
89
Type-1 Board:
90
Type-1 Connection:
91
Type-2 Board:
92
Type-2 Connection:
93
Type-3 Board:
94
Type-3 Connection:
95
Module 13:
VW,Skoda,Seat immo1 - Siemens immobox
Motorola
VW,Skoda,Seat
ID:
33
Transponder
Programmed
MCU Pack : PACK 3

This processor can be read in circuit. Be careful with the direction of the processor. The processor
pins should be clean.
96
Module 25:
Renault Laguna2 - Sagem UCH
Motorola
Laguna2
ID:
46
Transponder
Calculated
Type: Laguna card
pin code can be used to programme the card with a diagnostic tool.
97
Module 27:
Renault Megane2, Scenic2 - Siemens UCH
Motorola
Megane2
ID:
46
Transponder
Calculated
Type: Megane card
pin code can be used to programme the card with a diagnostic tool.
98
Module 30:
BMW, Range Rover, Mini Cooper - EWS1
MC68HC11EA9(2D47J)(0D46J)
BMW,Range
ID:
52pin, 512 Bytes
Rover,Mini Cooper
33 Rolling
Transponder
Type: Blank PCF7930/35 or remote key
Programmed
MCU Pack : PACK 2

2D47J mask numbers processors should not be read by this adapter. Otherwise the information in
processor can be erased.
99
Module 31:
BMW,Range
ID:
52pin, 512 Bytes
Rover,Mini Cooper
33 Rolling
Transponder
Programmed
MCU Pack : PACK 2

100
Module 32:
BMW,Range
ID:
52pin, 512 Bytes
Rover,Mini Cooper
33 Rolling
Transponder
Programmed
MCU Pack : PACK 2

This module can be read in circuit with pack 2 clip. The processor need to be cleaned very well,
before reading. Be careful with the direction of the MCUs. This processor can also be read with
chip removal.
Read in Circuit:
Read with Chip Removal:
101
Module 40:
Nissan, Subaru - Siemens immobox
Motorola
Nissan,
ID:
MC68HC05B6(F10V-B91T-D33J), 52pin, 256 Bytes
Subaru
33
Transponder
Programmed
MCU Pack : PACK 3

This processor CAN NOT BE READ IN CIRCUIT. Processor should be removed from the circuit
board and should be put to the reader clip. Be careful with the direction of the processor. Processor
pins should be clear.
102
Module 41:
Peugeot motorbike - Marelli immobox
Motorola
Peugeot
ID:
MC68HC05B16(0D60J)-MC68HC05X16(0D62J), 64pin, 256 Bytes
bike, Piaggio bike
11
Transponder
Type: T5
Programmed
MCU Pack : PACK 6

103
Module 44:
Peugeot - Siemens BSI
Motorola
MC68HC05B16(F10V-B91T-D33J-D60J), 52pin, 256 Bytes
206
ID:
45
Transponder
Type: Blank PCF7935
Programmed
MCU Pack : PACK 3

This processor CAN NOT BE READ IN CIRCUIT. Processor should be removed from the circuit
board and should be put to the reader clip. Be careful with the direction of the processor. Processor
pins should be clear.
104
Module 47:
Chrysler, Jeep, Dodge - SKIM immobox
Motorola
MC68HC08AB16A(L72A)/MC68HC08AZ32(J66D)/24c02,
64pin/64pin/8pin,
512/512/256 Bytes
Chrysler,Jeep,Dodge
ID:
64
Transponder
Programmed
transponder will start the vehicle.
MCU Pack : PACK 6

105
Module 48:
Mazda, Ford - Temic immobox
Motorola
323,
ID:
MC68HC705P3(1F75B), 28pin, 128 Bytes
Probe
12
Transponder
Type: T5
Programmed
106
Module 50:
Peugeot, Fiat, Citroen - immobox
Motorola
MC68HC05E6(F82B-G72G), 28pin, 160 Bytes
306
ID:
33
Transponder
Programmed
MCU Pack : PACK 1

This processor can be read in circuit. To read the chip in circuit, first pin of the processor should be
disconnected from the circuit board. To disconnect first pin of the processor from the circuit board,
the line to be cut is shown in figure below. Do not forget to reconnect the line after completing the
process.
The processor can be read by removing it from circuit board and putting to the reader clip.
Important: While putting the processor to the reader clip Zed-Prog should be off. Be careful with
the direction of the processor. Processor pins should be clean.
See the figure below to see which line should be cut from the circuit board to read the processor in
circuit.
107
108
Module 51:
Toyota - immobox
Motorola
MC68HC05E6(F82B-G72G), 28pin, 160 Bytes
Avensis
ID:
4C
Transponder
Programmed
Mcu Pack : PACK 1

The processor should be removed from circuit board, removed processor should be put to the reader
clip.
Important: While reading the processor Zed-Prog should be off. Be careful with the direction of
the processor. Processor pins should be clean.
109
Module 52:
Nissan - Siemens immobox(NATS-4)
TMS,
44pin, 256 Bytes
Nissan
ID:
41
Transponder
Type: Blank PCF7935
Programmed
110
Module 54:
Daewoo - immobox
Motorola
MC68HC05B6(F10V-B91T-D33J-D60J), 52pin, 256 Bytes
Daewoo
ID:
13
Transponder
Type: T5
Programmed
Mcu Pack : PACK 3

This processor can not be read in circuit. The processor should be removed and put to the reader
clip. Be careful with the direction of the processor. Processor pins should be clear.
111
Module 56:
Renault - Siemens immobox -98
Motorola
MC68HC05B16(D54J)/MC68HC05B6(B83T), 52pin, 256/256 Bytes
Megane
ID:
33
Transponder
Programmed
Mcu Pack : PACK 3

This processor can not be read in circuit. Processor should be removed from circuit board and put to
the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
112
Module 58:
Ford - immobox
TMS370C702,
Transit,
ID:
28pin, 256 Bytes
KA
4C
Transponder
Programmed
MCU Pack : PACK 5

113
Module 59:
Ford - immobox
TMS370C702,
28pin, 256 Bytes
Transit,Mondeo
ID:
4C
Transponder
Programmed
MCU Pack : PACK 5

114
Module 60:
Mazda - Lucas immobox
Motorola
MC68HC05B6(F10V-B91T-D33J-D60J) 52pin, 256 Bytes
626
ID:
33
Transponder
Programmed
Mcu Pack : PACK 3

This module can not be read in circuit. The processor should be removed from circuit board and put
to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
115
Module 61:
Ford - Visteon Dashboard
Motorola
Focus,
ID:
MC9s12H256(1K78X), 112pin, 4096 Bytes
C-Max
63
Transponder
Programmed
116
Module 64:
Fiat, Lancia - IMM100.01 Magneti marelli immobox
Motorola
MC68HC908AZ32(J66D), 64pin, 512 Bytes
Idea,Multipla,Lybra
ID:
48
Transponder
Programmed
MCU Pack : PACK 6

117
Module 65:
Fiat - Siemens BSI
Motorola
MC9S12DG128(L40K)/MC68HC912DG128(3K91D)/MC9S12DP256(1K79X)
112pin, 2048/2048/4096 Bytes

Panda
ID:
46
Transponder
Type: Blank PCF7936
Programmed
transponder should be programmed into the vehcile using a diagnostic tool with
118
Module 66:
Renault - Siemens UCH
Motorola
MC68HC705B32(G96A-G41V-D59J), 52pin, 256 Bytes
Megane,Scenic
ID:
60-64
Transponder
Programmed
transponder awill start the vehicle
Mcu Pack : PACK 3

This processor can not be read in circuit. Processor should be removed from the circuit board and
put to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
119
Module 68:
Motorola
MC9S12D64(2L86D), 80pin, 1024 Bytes
BMW,Range
ID:
Rover,Mini Cooper
33 Rolling
Transponder
Programmed
120
Modl 82:
Chery - immobox
MC68HC908AB16A 64pin, 512 Bytes
Fora, A1, A5, Elera, QQ, Tiggo
ID: 40
MCU Pack : PACK 6

121
Modl 84:
Renault - Valeo BSI
Motorola MC68HC908AZ32, 64pin, 512 Bytes
Espace
ID: 33
Transponder Type: T5 or PCF7930/31/35
MCU Pack : PACK 6

122
Modl 85:
Toyota - Valeo immobox
Motorola MC68HC05E6, 28pin, 160 Bytes
Avensis, Corolla
ID: 60
Mcu Pack : PACK 1

The processor should be removed from circuit board, removed processor should be put to the reader
clip.
Important: While reading the processor Zed-Prog should be off. Be careful with the direction of
the processor. Processor pins should be clean.
123
Modl 86:
Nissan - Siemens immobox(NATS-5)
TMS, 44pin, 256 Bytes
Nissan
ID: 60
124
Modl 90:
Chevrolet - Siemens UCH
Motorola MC68HC705B32(G96A-G41V-D59J), 52pin, 256 Bytes
Epica, Evenda
ID: 60
Mcu Pack : PACK 3

This module can not be read in circuit. The processor should be removed from circuit board and put
to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
125
APPENDIX:
Some of Motorola processors and matching mask numbers are given as below.
Motorola processors and Mask Numbers:

A75H
MC68HC811A2
B16B
MC68HC805C4
B19C
MC68HC811E2
B36T
MC68HC805B6
B46E
MC68HC11A8
B60R
MC68HC11E9
B65H
MC68HC11A8
B76T
MC68HC11A8
B83T
MC68HC05B6
B84N
MC68HC11A1
B91T
MC68HC05B6
B95T
MC68HC11A8
B96D
MC68HC11A8
B96T
MC68HC05C8
C11W
MC68HC11A1
C13W
MC68HC11L6
C14H
MC68HC05B6
C16J
MC68HC811E2
C16W
MC68HC705C8
C27B
MC68HC11E9
C28M
MC68HC11G5FN1
C35N
MC68HC05B16
C40H
MC68HC05J1
C45A
XC68HC711D3
C47M
MC68HC711E9
C83W
MC68HC11E9
C85W
XC68HC711L6
C91F
MC68HC11E1
C92K
MC68HC05C12A
C95K
MC68HC05E0
C96N
MC68HC11A1
D20J
MC68HC05B16
D26E
MC68HC11A8
126
D28J
MC68HC705B16
D33J
MC68HC05B6
D35E
MC68HC11E9
D37R
MC68HC05C12A
D40J
MC68HC705B32
D40J
MC68HC705X32
D41V
XC68HC705BE12
D45R
MC68HC11ED0
D46J
MC68HC11A8
D47J
MC68HC11EA9
D48J
MC68HC11PH8
D53J
MC68HC05X32
D54E
MC68HC705P9
D54J
MC68HC05B16
D58J
MC68HC11PA8
D59J
MC68HC705B32
D59J
MC68HC705X32
D60J
MC68HC05B16
D61N
XC68HC711KA4
D62J
MC68HC05X16
D64J
MC68HC(7)11P2
D67F
MC68HC711K4
D69F
PC68HC711N4
D69J
MC68HC05X32
D82R
MC68HC11E9
D86B
MC68HC705J2
D99H
MC68HC711P2
E11P
MC68HC16Z2
E20T
MC68HC705C4A
E20Y
MC68HC705P6CP
E22B
MC68HC11E20
E28B
MC68HC11E9
E31M
MC68HC705K1
E32B
MC68HC05C8
E41C
PC68HC916Y1
E50H
MC68HC05B16
E53M
MC68HC711P2
E54F
MC68HC16Z1
127
E57S
MC68HC11KA4
E59B
MC68HC11KA4
E61R
MC68HC705C8
E61W
MC68HC705F8
E62H
MC68HC11K4
E62W
MC68HC16Z1
E69W
MC68HC16Z1
E74J
MC68HC11P2
E75J
MC68HC11K4
E78C
MC68HC05J1A
E79R
MC68HC705C8A
E82K
MC68HC11E20
E88N
MC68HC711KA2
F10V
MC68HC05B6
F10W
MC68HC705SR3
F11N
MC68HC11L6
F12A
MC68HC05J1A
F17V
MC68HC11F1B4
F23H
MC68HC05P4A
F33P
PC68HC16V1
F37E
MC68HC11F1
F41E
MC68HC05L28
F41J
MC68HC05L28
F44T
MC68HC705J1A
F49K
MC68HC705C8A
F52E
MC68HC11E32
F53E
MC68HC11KG4
F56K
MC68HC705B16
F62A
MC68HC05C8
F62J
MC68HC05B16
F63J
MC68HC705C9A
F67V
MC68HC16Z1
F68K
MC68HC912D60
F71L
MC68HC05C8 or 705C8
F73K
MC68HC912D60
F73T
MC68HC16Z1
F88B
MC68HC705X4
F92J
MC68HCP11A1
128
F96J
MC68HC11E9
F97J
MC68HC11E9
F98Y
MC68HC708AS48
G10V
MC68HC(7)11P2
G11D
MC68HC16Z2
G23V
MC68HC08AZ32
G26C
MC68HC16Z3
G28F
MC68HC05B16
G32V
MC68HC11KG4
G33P
XC68HC705P6ACP
G35N
MC68HC05B16
G39Y
MC68HC08AS20
G40G
MC68HC805K3
G41V
MC68HC705B32
G47V
MC68HC705X32
G49V
MC68HC08AZ32
G53F
MC68HC05J1A
G54K
MC68HC05TB
G58F
MC68HC705J1A
G59F
MC68HC711E20
G62K
MC68HC708AS48
G63P
MC68HC705J1A
G78M
MC68HC705V12
G96A
MC68HC705B32
G96Y
MC68HC705V12
H14A
MC68HC708AS48
H19S
MC68HC711E20
H24M
MC68HC05V12
H42K
MC68HC705C8A
H48T
XC68CM16Z1
H50W
MC68HC711E9
H52P
MC68HC705V12
H54T
MC68HC12BE32
H55B
MC68HC705BD9
H55F
MC68HC805K3
H55W
MC68HC912DG128
H56A
MC68HC08AZ32
H57A
MC68HC05H12
129
H62A
MC68HC908AS60 or AZ60
H62P
MC68HC908AT32
H70H
MC68HC705SJ7
H72J
MC68HC705C8A
H86A
MC68HC711KG2
H86X
MC68HC(7)11KG2
H91F
MC68HC912B32
H94K
MC68HC08AS20
H95B
MC68HC(7)11K4
H96J
MC68HC05JJ6
J20X
MC68HC908GP32
J26R
MC68HC08AS20
J27F
MC68HC08AS32
J34P
MC68HC12BE32
J35D
MC68HC08AZ60
J38M
MC68HC12BE32
J54E
MC68HC912B32
J56W
MMC2001 or 2003
J61D
MC68HC908AS60
J64Y
MC68HC912B32
J66D
MC68HC08AZ32
J66H
MC68HC705J1A
J73R
MC68HC705C8A
J74Y
MC68HC908AS60
J79Y
MC68HC908BD48
J88Y
MC68HC908JK3
K00J
MC68HC908RK2
K02S
MC68HC05P4A
K03B
MC68HC705C9A
K05W
MC68HC711D3
K07E
MC68HC11KS2
K08B
MC68HC705C8A
K08S
MC68HC908GP32
K08W
MC68HC711KS2
K11N
MC68HC908LD64
K13J
MC68HC12D60
K20C
MC68HC705B16
K20R
MC68HC05PV8A
130
K22K
MMC2001 or 2003
K25E
MC68HC912BC32
K36N
MC9S12DP256
K38K
M68HC912D60
K39K
MC68HC908SR12
K45D
MC68HC908KX8
K45H
MC68HC908JB8
K50E
MC68HC912DG128
K54X
MC68HC711K4
K56G
MC68HC908AB32
K59D
MC68HC08JB8
K59H
PC527283MFU
K75F
MC68HC912D60
K78X
MC9S12H256
K79X
MC9S12DP256 or A256
K81H
MC68HC711E9
K85K
MC68HC908AZ60A or AS60A
K85V
MC68HC908AZ60A
K91D
MC68HC912DG128
L02H
M68HC912D60
L05H
M68HC912DT128
L06H
MC68HC908SR12
L09H
MC68HC908KX8 or KX2
L45J
MC9S12C32
L51J
M68HC912D60
L52H
MC68HC08AZ32A
L53J
MC68HC908GR8
L54J
MC68HC908MR32 or 16
L69J
MC68HC908QT1-4 or QY1-4
L85D
MC9S12A128 or DTB128
L87J
MC68HC908AZ60A or AS60A
131

Zedprogmanual PDF

Uploaded by

Copyright:

Available Formats

Zedprogmanual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Zedprogmanual PDF

Uploaded by

Copyright:

Available Formats

What are the main features of Zed-Prog?

What are the main features of Zed-Prog?

How is Zed-Prog used with Zed-BULL?

How is Zed-Prog used with Zed-BULL?

ZEDPROG

STANBUL ELEKTRONK ANAHTAR

1. Zed-Prog and Hardware Features.............................................................................3

1. Zed-Prog and Hardware Features

Figure 2.1 Zed-Prog & Zed-Bull Connection

Figure 2.2 Connecting Clip to the chip

may cause serious damages.

Figure 2.3 Choosing chip type in Zed-BULL menu

Figure 3.1 Zed-Prog power in and usb connection

Figure 3.3 Update steps

Figure 3.4 Update status screen

Figure 3.5 Update result information screen

4. Saving read EEPROM file to your Pc using Zed-BULL PC Software

Figure 4.1 Zed-Prog Power in jack and usb connection

Extended Functions >> Zed-PROG

Figure 4.2 Choosing Zed-Prog from Zed-Bull Pc Software

After clicking Zed-Prog, following window will appear:

Figure 4.3 Zed-Prog Window

Figure 4.4 Zed-Prog window after successful read

Figure 4.5 Saving File

Figure 4.5 Save file options

5. Zed-Prog EEPROM and MCU Applications List

75 Honda bike - immobox

5. Zed-Prog EEPROM and MCU Packs

7. Zed Prog EEPROM and MCU Adapters:

General Purpose EEPROM Adapter:

Be careful with the direction of the MCUs:

8pins, 512 Bytes

Type: Blank PCF7935

transponder will start the vehicle

8pins, 128 Bytes

transponder will start the vehicle

8pins, 128 Bytes

transponder will start the vehicle.

8pins, 256 Bytes

Type: Megamos Crypto

transponder and created image file will start the vehicle.

8pin(SSOP), 2048/4096 Bytes

Boxer3, Jumper3, Daily

Type: Megamos Crypto

calculated pin code.

8 pin(dip), 512 Bytes

Type: Jma TPX1, Silca Electronic head

transponder will start the vehicle

8pin, 128/256 Bytes

Opel movano, Renault master

transponder will start the vehicle

8pin, 512 Bytes

symbol, logan, sandero, solenzo

Type: Blank PCF7936

calculated pin code

8pin, 512 Bytes

Albea, Alfa 156, Punto

Type: Megamos Crypto

transponder and created image file will start the vehicle.