TM Smartcool 6 200kw
TM Smartcool 6 200kw
TM Smartcool 6 200kw
22 0V /
0V / 3P
/ 3 3Ph h +
Ph + N
/ 6 N / / 50
0 H 60 H
z Hz z ((-2 ( 0)
) -1)
40
SmartCool Downflow
6 to 200kW
SN, SR and SD
SmartCool Chilled Water
Technical Manual
Introduction
SmartCool 6 - 200kW
Warranty
All Airedale International Air Conditioning products or parts (non consumable) supplied for installation within the UK
mainland and commissioned by an Airedale engineer, carry a full parts & labour warranty for a period of 12 months from the
date of commissioning or 18 months from the date of despatch, whichever is the sooner.
Parts or equipment supplied by Airedale for installation within the UK or for export that are properly commissioned in
accordance with Airedales standards and specification, not commissioned by an AIAC engineer; carry a 12 month warranty
on non consumable parts only from the date of commissioning or 18 months from the date of despatch, whichever is the
sooner.
Parts or equipment installed or commissioned not to acceptable Airedale standards or specification invalidate all warranty.
In the period between delivery and commissioning the equipment: is properly protected & serviced as per Airedales
installation & maintenance manual provided where applicable the glycol content is maintained to the correct level.
In the event of a problem being reported and once warranty is confirmed as valid under the given installation and operating
conditions, the company will provide the appropriate warranty coverage (as detailed above) attributable to the rectification
of any affected Airedale equipment supplied (excluding costs for any specialist access or lifting equipment that must be
ordered by the customer).
Any spare part supplied by Airedale under warranty shall be warranted for the unexpired period of the warranty or 3 months
from delivery, whichever period is the longer.
To be read in conjunction with the Airedale conditions of sale - Warranty and warranty procedure, available upon request.
CAUTION
Warranty cover is not a substitute for maintenance. Warranty cover is conditional to maintenance being carried out
in accordance with the recommendations provided during the warranty period. Failure to have the maintenance
procedures carried out will invalidate the warranty and any liabilities by Airedale International Air Conditioning Ltd.
Spares
A spares list for 1, 3 and 5 years will be supplied with every unit and is also available from our spares department on
request.
Training
As well as our comprehensive range of products, Airedale offers a modular range of Refrigeration and Air Conditioning
Training courses, for further information please contact Airedale.
Customer Services
International Enquiries
+ 44 (0) 113 239 1000
Spares Hot Line
+ 44 (0) 113 238 7878
Airedale Service
+ 44 (0) 113 239 1000
Technical Support
+ 44 (0) 113 239 1000
Training Enquiries
+ 44 (0) 113 239 1000
For information, visit us at our Web Site: www.airedale.com
enquiries@airedale.com
spares@airedale.com
service@airedale.com
tech.support@airedale.com
marketing@airedale.com
Legal Notices
Airedale International Air Conditioning endeavours to ensure that the information in this document is correct and fairly stated, but none of the statements
are to be relied upon as a statement or representation of fact. AIAC Ltd does not accept liability for any error or omission, or for any reliance placed on
the information contained in this document.
The development of Airedale products and services is continuous and the information in this document may not be up to date. It is important to check the
current position with Airedale at the address stated. This document is not part of a contract or licence unless expressly agreed.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or
information storage and retrieval systems, for any purpose other than the purchasers personal use, without the express written permission of AIAC Ltd.
Cover image for illustration only.
2014 Airedale International Air Conditioning Limited. All rights reserved. Printed in the UK.
SmartCool 6 - 200kW
Warranty 2
Health and Safety
Introduction 7
System Configurations
SN, SR Nomenclature
Introduction
Contents
SD Nomenclature
10
Construction 11
SN, SR Units
11
SD Units
11
Unit Overview
12
SN, SR Range
12
SD Range
12
13
Airflow Components
18
Electrical Components
20
Humidification
24
Controls 27
General Features
33
Installation Data
43
Dimensions 43
Positioning 53
Minimum Unit Clearance SN, SR
53
54
Incoming Services
62
Glycol 65
66
66
SN06D010-C000 68
SN06D015-C000 70
SN09D020-C000 72
SN09D025-C000 74
SN12D030-C000 76
SN12D035-C000 78
Waterside Pressure Drop Data
80
Sound Data
81
Interconnecting Wiring
82
84
84
SR09D030-C000 86
SR09D040-C000 88
SR12D045-C000 90
SR12D055-C000 92
SR15D065-C000 94
SR15D075-C000 96
SR18D080-C000 98
SR18D095-C000 100
Waterside Pressure Drop Data
102
Sound Data
103
Interconnecting Wiring
104
Introduction
SmartCool 6 - 200kW
Contents
Technical Data SR C0C0 Units
Performance Data SR C0C0
106
106
SR09D020-C0C0 108
SR09D025-C0C0 110
SR12D030-C0C0 112
SR12D035-C0C0 114
SR15D040-C0C0 116
SR15D045-C0C0 118
SR18D050-C0C0 120
SR18D060-C0C0 122
Waterside Pressure Drop Data
124
Sound Data
125
Interconnecting Wiring
126
128
128
SD18D110-CH00 130
SD22D140-CH00 132
SD25D175-CH00 134
SD31D215-CH00 136
SD35D255-CH00 138
Waterside Pressure Drop Data
140
Sound Data
142
Interconnecting Wiring
143
144
144
SD18D115-CL00 146
SD22D145-CL00 148
SD25D180-CL00 150
SD31D235-CL00 152
SD35D270-CL00 154
156
Sound Data
158
Interconnecting Wiring
159
SmartCool 6 - 200kW
160
160
SD18D085-CHCH 162
SD22D105-CHCH 164
Introduction
Contents
SD25D135-CHCH 166
SD31D165-CHCH 168
SD35D195-CHCH 170
Waterside Pressure Drop Data
172
Sound Data
174
Interconnecting Wiring
175
176
176
SD18D090-CLCL 178
SD22D120-CLCL 180
SD25D140-CLCL 182
SD31D190-CLCL 184
SD35D225-CLCL 186
Waterside Pressure Drop Data
188
Sound Data
190
Interconnecting Wiring
191
After Sales
192
Warranty 192
Introduction
SmartCool 6 - 200kW
The information contained in this manual is critical to the correct operation of the unit and should be read by all persons
responsible for the installation, commissioning and maintenance of the Airedale unit.
Safety
The equipment has been designed and manufactured to meet international safety standards but, like any mechanical/
electrical equipment, care must be taken if you are to obtain the best results.
CAUTION
Installation, service and maintenance of Airedale equipment should only be carried out by technically trained
competent personnel.
When working with any air conditioning units, ensure that the electrical isolator is switched off prior to servicing or
repair work and that there is no power to any part of the equipment.
Also ensure that there are no other power feeds to the unit such as fire alarm circuits, BMS circuits etc.
Electrical installation commissioning and maintenance work on this equipment should be undertaken by competent
and trained personnel in accordance with local relevant standards and codes of practice.
A full hazard data sheet in accordance with COSHH regulations is available should this be required.
Airedale recommends that personal protective equipment is used whilst installing, maintaining and commissioning
equipment.
Manual Handling
Some operations when commissioning, servicing or maintaining the unit may require additional assistance with regard
to manual handling. This requirement is down to the discretion of the engineer. Remember, do not perform a lift that
exceeds your ability.
Environmental Policy
CE Directive
Airedale certify that the equipment detailed in this manual conforms with the following EC Directives:
Electromagnetic Compatibility Directive (EMC)
Low Voltage Directive (LVD)
Machinery Directive (MD)
Pressure Equipment Directive (PED)
2004/108/EC
2006/95/EC
89/392/EEC in the version 2006/427/EC
97/23/EC
To comply with these directives appropriate national & harmonised standards have been applied.
These are listed on the Declaration of Conformity, supplied with each product.
SmartCool 6 - 200kW
Designed to provide environmental precision air conditioning for applications such as telecommunication facilities, data
centers, computer rooms, clean rooms and laboratories.
Full function units provide full control of temperature, humidity and filtration.
The modular design of the SmartCool allows grouping of differing model types and capacities to be installed side by
side. The flexibility of this type of installation provides for multi-circuit functionality.
SN, SR
SD
Range
SN C000(1)
SR C000(1)
SR C0C0(1)
Range
SD CH00(1)
SD CHCH(1)
SD CL00(2)
SD CLCL(2)
Performance (kW)
105 255
75 184
92 215
75 185
rat
ion
(J/
g
Dr
yA
ir)
En
tha
lpy
a
ts
atu
iv
e
el
%
60
at
70
Te
m
20
80
pe
ra
tu
re
10
0
90
(
C)
25
ul
b
50
(2)
Performance (kW)
13 36
35 98
25 70
W
et
B
(1)
Introduction
Introduction
40
15
1
10
Moisture Content
Operating Band
2 0%
0
10%
10
15
20
18
25
30
35
40
27
Dry Bulb Temperature (C)
Introduction
SmartCool 6 - 200kW
System Configurations
SN, SR Range
SD Range
SN C000 Units
SmartCool 6 - 200kW
S
S
R
N
Product Name
Variant
684 mm
1521 mm
18
1800 mm
010
095
C000
1242 mm
15
Flow Configuration
055
963 mm
06
Case Width
12
SmartCool
09
12
Introduction
SN, SR Nomenclature
Downflow
C000
C0C0
Separator
Cooling Configuration
Single Circuit CW
Dual Circuit CW
Separator
0
1
SN, SR C000
SR C0C0
Introduction
SmartCool 6 - 200kW
SD Nomenclature
S
S
Product Name
SmartCool
Product Variant
18
3100 mm
3500 mm
Flow Conguration
Separator
Chilled Water
L
C
0
H
L
-
Coil Type
Second Circuit
Downow
Separator
0
1
2
215
2500 mm
35
085-255
2200 mm
Case Width
31
31
1800 mm
22
25
SD CH00 / SD CL00
SD CHCH / SD CLCL
10
SmartCool 6 - 200kW
The computer room air conditioning equipment shall be designed specifically for precision temperature and humidity
control applications. It shall automatically monitor and control cooling, heating, humidification, de-humidification
and filtering functions for the conditioned space. The system shall be built to the highest quality engineering and
manufacturing standards and shall be subject to a functional test prior to leaving the factory.
Introduction
Construction
SN, SR Units
The cabinet shall be manufactured using an external aluminium extrusion frame with aluminium corners.
Panels shall be completely removable to gain unequalled access during installation as required. The galvanised sheet
steel panels and aluminium frame and corners shall be coated with an epoxy baked powder paint to provide a durable
finish.
Standard unit colour shall be Black Grey to RAL 7021.
Cabinets shall be lined internally with various thickness fire resistant foam (BS 476) for thermal and acoustic insulation.
The insulation density shall not be less than 75 kg/m.
The cabinet doors shall be full height, hinged and key lock secured. The hinge arrangement shall allow flexible door
opening/removal for improved access.
A propriety rubberised door seal shall reduce sound breakout and eradicate air leakage. In-seal type foam based door
seals shall not be acceptable.
The control panel is mounted on hinges to allow easy removal of filters and access to several electrical components.
The unit design shall incorporate a series of M6 fixings to the top and bottom face to ease customer ductwork
connection and reduce installation time.
SD Units
11
Introduction
SmartCool 6 - 200kW
Unit Overview
SN, SR Range
Cooling Coils
Air Filters
Control Panel
Electric Heat
Fans
Humidification
SD Range
Air Filter
Humidifier
Chilled
water
pipework
Control Panel
Floor
Height
Floorstand
12
Fans
SmartCool 6 - 200kW
SN, SR Range
Introduction
Cooling Coils
13
Introduction
SmartCool 6 - 200kW
Cooling Coil
Valves
Pipework
Connections
System Configuration
Range
Chilled Water
Number of Circuits
SR
SD
Single
Single
Dual
Single
Dual
Brazed Connection
Threaded Connections
Grooved Connections
Standard Features
14
SN
Optional Features
SmartCool 6 - 200kW
Chilled water coils shall be ideally positioned to optimise airflow and heat transfer, they shall be manufactured from plain
copper tubes with mechanically bonded aluminium fins. Fins shall be coated with a non-stick acrylic film (hydrophilic) to
provide additional corrosion protection and efficient surface water removal for improved performance. Plain aluminium
shall not be acceptable.
Introduction
The cooling coil shall be mounted over a full width stainless steel condensate tray.
For control of water flow, various valve options shall be fitted.
The factory test pressure shall not be less than 20 Barg and the maximum operating pressure shall be less than 10.
Sweat copper pipe for brazed connection shall be standard. Optional threaded and Grooved connections shall be
available.
SN, SR Coils
SD Coil
SN06
Standard Features
SN09
SN12
Optional Features
SR09
SR12
SR15
SR18
SD18
SD22
SD25
SD31
SD35
15
Introduction
SmartCool 6 - 200kW
SN06
2 Port Chilled Water Valves
2 Port Chilled Water Valves with
2 Port Commissioning Valve
3 Port Chilled Water Valves
3 Port Chilled Water Valves with Bypass
Standard Features
SN09
SN12
Optional Features
SR09
SR12
SR15
SR18
SD18
SD22
0-10 Volts DC 3 Port Chilled Water Regulating Valve with Bypass (SN, SR Units)
16
SD25
SD31
SD35
SmartCool 6 - 200kW
For systems with variable speed pumps and water flow, a 2 port control valve can be fitted. The two port valve has a
shut off pressure of 13.6 Barg.
Introduction
0-10 Volts DC 2 Port Chilled Water Regulating Valve (SN, SR, SD Units)
SD 2 Port Valve
0-10 Volts DC 2 Port Chilled Water Regulating Valve with bypass for auto commissioning (SD Units)
For systems with variable speed pumps and water flow, a 2 port control valve can be fitted The two port valve has a
shut off pressure of 13.6 Barg.
A bypass leg fitted with a further 2 port valve enables auto commissioning.
The auto commissioning shall be enabled by using a differential pressure transducer to maintain balanced water flow
through the bypass. The controller maintains the same pressure drop through the coil and the bypass. A fixed flowrate is
required for this initial commissioning to occure.
17
Introduction
SmartCool 6 - 200kW
Airflow Components
SR, SN Ranges
SD Range
System Configuration
Range
Chilled Water
Number of Circuits
SN
SR
SD
Single
Single
Dual
Single
Dual
G4 Air Filtration
Airflow Monitoring
Airflow Switch
Standard Features
Optional Features
Backward curved impellers, direct drive centrifugal fan assemblies shall be used with integral EC motors. They shall be
dynamically balanced for quiet operation.
Fan speed, air flow and external static pressure shall be controlled by the use of a voltage controller which shall
maintain optimised performance and reduce energy consumption.
Designed for high corrosion resistance, the impellers shall be composite plastic with a galvanised rotor.
18
SmartCool 6 - 200kW
Introduction
The fans offer maximum air flow performance while keeping sound
levels to a minimum.
It gives the flexibility of connecting to AC mains with the efficiency
and simple speed control of a DC motor. The EC fan offers significant
power reduction in comparison with an equivalent AC fan at modulated
fan speeds. The inbuilt EC fan control module allows for fan speed
modulation from 15-100%.
A standard AC fans modulating range is typically 40 -100% of full fan
speed.
Input Power
Airflow
Key
G4 Filtration
An adjustable differential pressure switch shall activate a visual alarm at the status panel and break the power supply in
the event of a fan or motor failure.
19
Introduction
SmartCool 6 - 200kW
Electrical Components
System Configuration
Range
Electrical
Number of Circuits
SN
SR
Single
Single
Dual
Single
Dual
Power Monitoring
Variable Humidification
Electric Heating
Standard Features
Optional Features
20
SD
SmartCool 6 - 200kW
Introduction
Electrical Panels
The control panel contains the necessary contactors, transformer, sub circuit protection, volt free contacts for a common
alarm and mains and inter-connecting terminals. The panel is situated within the cabinet and can be opened to allow for
essential maintenance of other components within the unit (SN, SR Units only). The electrical control panels are wired to
the latest European standards and codes of practice.
SD Units
21
Introduction
SmartCool 6 - 200kW
Electric Heating
SN, SR Units
These shall be multi-stage finned electric heating elements complete with auto and manual reset overheat cut-out
protection, element shall be phase balanced for increased efficiency.
The electric heating elements are designed to be located between coil blocks, prior to fans. This enables the unit to
effectively re-heat the air and evenly distribute the temperature within the floor void. All sizes of electric heating are
configurable based upon customer requirements.
A maximum bank of 7.5kW is allocated per coil block The avaliable heating shall be 3kW, 6kW or 7.5kW. Consequently
the level of configuration is dependent on the number of coils in the unit.
SD Units
These shall be multi-stage finned electric heating elements complete with auto and manual reset overheat cut-out
protection, element shall be phase balanced for increased efficiency.
The electric heating elements are designed to be located within the units fan module. This enables the unit to effectively
re-heat the air and evenly distribute the temperature within the floor void. All sizes of electric heating are configurable
based upon customer requirements.
A bank of 7.5kW is allocated per fan and as standard each can be downsized in banks of 7.5kW. Consequently the level
of configuration is dependent on the number of fans in the unit.
In addition to the electric heat option a 0 100% Thyristor shall be provided to deliver accurate heating control.
SN06
3kW Electric Heat
6kW Electric Heat
7.5kW Electric Heat
15kW Electric Heat
22.5kW Electric Heat
30kW Electric Heat
SN09
SN12
SR09
SR12
SR15
SR18
SD18
SD22
SD25
SD31
SD35
SmartCool 6 - 200kW
Introduction
Humidification
SR and SN Ranges
SD Range
The flexibility of the humidification options across the SmartCool SD range enables the humidification to be configured
to meet the customers design requirements and conditions.
Note: the 30 kg/hr option utilises 2x 15 kg/hr bottles.
Humidification Sizes
3kg/hr Humidification
8kg/hr Humidification
15kg/hr Humidification
30kg/hr Humidification
Standard Features
SN06
SN09
SN12
SR09
SR12
Optional Features
SR15
SR18
SD18
SD22
SD25
SD31
SD35
Not Avaliable
23
Introduction
SmartCool 6 - 200kW
Humidification
Control Principles
In a humidifier with electrodes, steam shall be produced by passing a current between electrode plates to generate heat.
The higher the current being passed between the electrodes, the greater the quantity of steam that is produced.
To modulate the rate of steam production, this system shall vary the level of water within the cylinder, thereby increasing
the immersion level of the electrodes and the current being passed between them. The more conducting area that is
available to pass current between the electrodes, the larger the amount of steam that shall be produced.
Modulated by the controller, the water level is varied so that the level of steam being produced ensures that the room
humidity set-point is continually maintained within a tight tolerance.
Optimised Lifetime
The life span of the Airedale humidification system shall be optimised by the inclusion of a water conductivity sensor
into the bottle feed. This sensor shall determine the conductivity level of the supply water and by using an algorithm
embedded in the software, determines the frequency that the bottle should be drained.
Example: (Optimised Lifetime with High Water Conductivity Supply)
As liquid water is boiled off into steam, mineral deposits are left in solution increasing the conductivity of the water.
To counter this, the intelligent software increases the frequency of drain meaning that the replenishing supply water
keeps the concentration of minerals diluted. By maintaining an acceptable mineral concentration, the bottle lifespan is
maximised.
De-humidification
24
SmartCool 6 - 200kW
Humidification shall be provided by an electrode boiler. The sealed humidifier design shall ensure that only clean sterile
steam is supplied to the conditioned area and corrosive salts and minerals are held in the disposable bottle. The steam
shall be distributed through a sparge pipe fitted to the coil assembly.
Featuring modulating capacity output control as standard, the system shall provide continuous modulation of steam
output in response to a proportional control signal. The output control shall range from 20%-100% of the humidifier rated
value and be designed to give an approximate steam output of +/- 5% at 25C (at the sensor), thus ensuring precise
control of the conditioned space.
Introduction
The cylinder operating life time shall be automatically optimised via the integrated water conductivity sensor, which
combined with the controls shall monitor and regulate the water refill cycle to reduce excessive salt deposits and the
progressive wear of the cylinder.
All humidifier parameters and alarms shall be accessible and adjustable via the microprocessor display keypad unit,
main features shall include not less than:
Supply water conductivity (S/cm)
Actual steam output (kg/h)
Required steam output (kg/h)
Actual current rating (A)
Required current rating (A)
Status mode (Start Up, Running, Filling, Draining)
Three different cylinders shall be available which correspond to the supply water conductivity.
The cylinder type shall be matched with the standard conductivity of the supply water to ensure optimum performance
and to increase the life span of the cylinder.
1
2
3
Conductivity is a measure of the ability of water to pass an electric current, measured in micro Siemens / centimetre (S/
cm).
As standard the humidifier shall be fitted with the standard conductivity cylinder which shall cover the majority of water
supplies.
Where the water conductivity is known, please specify at order.
For further details please contact Airedale.
25
Introduction
SmartCool 6 - 200kW
The SmartCool range shall be designed with dual power supply capability,
so that in the event of a power failure the supply can be switched from utility
to an alternative power supply (such as second utility or generator).
A dual power supply changeover switch shall be provided to enable
continuous power to the SmartCool in order to reduce unit downtime and
therefore loss of cooling to a minimum.
For the dual power supply feature to operate effectively the two incoming
power supplies must have the same voltage and frequency.
During changeover of power there is an interval of 180ms with no power.
For critical applications a power backup module can be added to maintain
power to the unit controls, allowing for immediate reinstatement of cooling
following changeover.
The option as standard offers switch position status and supply priority set,
both of which are configurable via the units display.
Supply priority set is fully configurable via the units display and is used to
set which of the two power supplies power will be drawn from when both
power supplies are active.
Switch position status indicates to the end user which position the switch is
currently in i.e. A or B and is shown via the units display.
When the dual power supply is fitted the UltraCap UPS is fitted as standard.
Ultracap UPS
The Ultracap module is an external backup device for the controller. The
module guarantees temporary power to the controller in the event of power
failures and allows for enough time to keep the controller running with time to
change power supplies.
The module is made using Ultracap storage capacitors (EDLC = Electric
Double Layer Capacitor), which are recharged independently by the module.
These ensure reliability in terms of much longer component life than a module
made with lead batteries: the life of the Ultracap module is at least 10 years.
When the dual power supply is fitted the Ultracap UPS is fitted as standard.
Energy Manager
26
SmartCool 6 - 200kW
Introduction
Controls
System Configuration
Range
Controls
Number of Circuits
SN
SR
SD
Single
Single
Dual
Single
Dual
PCO5 Microprocessor
Airetronix Controls
Temperature Control
Fire Detection
Smoke Detection
Water Detection
Standard Features
Optional Features
27
Introduction
SmartCool 6 - 200kW
Controls
The units shall be supplied with a European ROHS Directive 2002/95/EC compatible microprocessor controller
connected to an 8 x 22 back-lit LCD keypad display. LEDs shall not be acceptable.
The microprocessor controller offers powerful analogue and digital control to meet a wide range of monitoring and
control features including a real time clock and Industry standard communication port and network connections.
All the boards feature a 16 bit microprocessor, and consequently the calculation power and operation processing speed
have been significantly increased.
Also featured are a visual alarm and the facility to adjust and display control settings by local operator for information
and control.
Display / Keypad
The display keypad features a simple array of keys to navigate through the in built menus.
With an 8 x 22 character (132 x 64 pixel) screen size, back lit in white for improved contrast, the larger screen shall
provide for user friendly viewing and easy status recognition by displaying a combination of text and icons.
The default screen shall show the unit status and room condition (C/RH %) without the need for interrogation and an
easy to navigate menu structure for further interrogation and adjustment shall be provided.
Fan Operating
De-humidification
Cooling - Up to 6 Stages
Humidification - Variable
28
SmartCool 6 - 200kW
Password Protection
The control system integrity shall be maintained by restricting access with a password PIN number.
IMPORTANT
Introduction
Controls
To change the PIN , please contact Airedale at time of order with the preferred 4 digit number.
Remote On/Off
Terminals for interlocking shall be provided to enable or disable the unit remotely.
Terminals for interlocking shall be provided to shut down the unit in the event of fire.
Shall allow the user to monitor the running times of the evaporator fans and reset after maintenance.
Hours run log or visual service indicator shall be provided.
Evaporator fan speed control shall be easily set via the display keypad and can be incrementally increased or decreased
to meet on site airflow and external static pressure requirements.
Filter change shall be managed by the software, and shall be based on fan(s) hours run with an alarm being generated
when the pre-set run time limit has been exceeded. The set-point value shall be adjusted to suit each application and is
factory set to 4000 hours.
29
Introduction
SmartCool 6 - 200kW
Controls
Standard Network Features
As standard the controller shall be capable of providing a platform for the following and shall be enabled on request for 2
to 8 units, please specify at order:
Networking
A Local Area Network (pLAN ) shall be used to connect up to 8 units to offer intercommunication and Run / Standby
control. This also allows the connection of computers, printers and modems on the same communications ring.
For further details, please contact Airedale Controls.
CAUTION
When adding to an existing network, please consult Airedale to ensure strategy compatibility.
The controller shall enable units to operate in run/standby mode, with up to 8 units networked together, without the need
for additional hardware or controllers. Standby units shall be configured to start when the run unit has a critical alarm.
Smart Key
A smart key shall be supplied to offer software back-up of the control strategy. The key shall feature simple plug in
operation and allow transfer of software programs from the key to the microprocessor and vice versa. The use of a
service laptop shall not be necessary.
Audible Alarm
Water Detector
Fire Detection
Shall be supplied loose for installation in the return air stream to shut down the unit in the event of an unusually high
return air temperature.
Smoke Detector
Shall be supplied loose for remote mounting to shut down the unit and activate the alarm upon sensing the presence of
smoke.
30
SmartCool 6 - 200kW
Temperature Control
A temperature sensor shall be mounted in the return air side of the unit to sense the return dry bulb condition (cooling
only variants). A combined temperature and humidity sensor shall be supplied on full function units.
Introduction
Controls
The temperature sensor shall be an NTC type thermistor with an accuracy of not less than +/ - 5% at 25C at the sensor.
The microprocessor shall sense the return air conditions and maintain the return air temperature and humidity by
controlling cooling, heating, humidification and dehumidification outputs accordingly.
The microprocessor shall monitor and display the following values as a minimum:
Return Air Temperature
Return Air Humidity (Optional on Full Function units)
Fan run hours
Coil Temperature Sensor (Indoor)
The maintenance of key components such as air filters shall be monitored via a service indicator which visually
demonstrates the status relative to the component service intervals.
Alarm Log
The controller shall log and allow viewing of not less than the last 100 conditions recorded in descending chronological
order through the keypad display.
The standard display keypad shall visually display operating alarms, however, as an optional extra, a display keypad
with audible alarms is available.
Modulation of unit capacity to ensure that user defined supply air set points shall be maintained and / or a high / low
return air temperature alarm.
During peak demand, the standby units shall temperature assist.
Duty Rotation
Networked units shall be configured to duty rotate, providing equal hours run of fans.
BMS Interface Card controlled units shall be interfaced with most BMS, factory fitted, please contact Airedale.
A wide range of protocols shall be accommodated through the use of interface devices. Available as a standard option
are: ModBus / Jbus, and Carel.
For interfaces such as SNMP, LonWorks, Metasys and BACnet, please contact Airedale.
Also available shall be Airedales own supervisory plug-in BMS card pCOWEB.
Based on Ethernet TCP/IP secure technology with SNMP features.
It shall require no proprietary cabling or monitoring software and be supplied pre - programmed with an IP address for
ease of set up. Cables to the BMS to be supplied by others.
31
Introduction
SmartCool 6 - 200kW
Constant pressure control is a method of controlling air pressure within a space, such as a floor void or a duct. The air
pressure is controlled using a variable speed fan that is modulated to maintain a given set point.
Constant pressure control monitors the air pressure differential between two points. In a typical application (shown
below) the pressure under the raised floor (red) is compared to the room pressure (blue).
The two pressure points, positive and negative, are routed back to an air differential pressure sensor inside the CRAC
unit. The value from the air pressure sensor is compared to the set point and a fan speed demand is generated, to
maintain the required pressure differential.
It is the responsibility of the installer to fit the air pressure sensor(s). The sensor shall be be located under the false
floor with the 6mm flamtronix tubing routed back into the control panel of the unit (the tubing must not be obstructed /
damaged to ensure accurate pressure control).
The contant pressure system shall be commissioned by Airedale following routing of tubing from the pressure diffuser
and the unit.
A maximum of 8m/s air velocity is allowed at the diffuser so consideration must be made to its location.
Constant air volume is a method of automatically adjusting the unit fan speed to deliver a specific air volume.
When faced with a change in system resistance, the fan speed modulates to obtain the air volume set point.
Constant air volume monitors the air pressure differential between two points.
These two pressure points, positive and negative, are routed back to an air differential pressure sensor inside the unit.
32
SmartCool 6 - 200kW
Introduction
General Features
System Configuration
Range
Circuits
Condensate Pump (Hot or Cold Water)*
General
Standard Features
Optional Features
SN
SR
SD
Single
Single
Dual
Single
Dual
Open or enclosed floor stands shall be available, complete with adjustable feet and floor tile lip. Enclosed floor stands
shall incorporate an air turning vane (SN,SR only). The height of the floor stand shall be specified at order.
Straight and L shaped duct extensions up to a height of 1350mm shall be constructed and finished to match the unit.
For extensions greater than 1350mm, please contact Airedale.
Height shall be specified at order.
Units shall be supplied complete with additional LAT corner protection and cross braces to afford extra transit protection.
Sterling board heat treated man made material shall be used (including pallet) to comply with phytosanity import
regulations, please contact Airedale for this option).
33
Introduction
SmartCool 6 - 200kW
Condensate Pumps
The SmartCool condensate pump shall be either hot water (full function units when a humidifier is fitted) or cold water
type (cooling only).
Performance
The following graphs illustrate the TOTAL static (head) pressure available. The system horizontal pipe losses and
vertical lift should be factored in when calculating the condensate pump performance.
5
Head (m)
4
3
2
1
0
0.0
0.5
1.0
1.5
SD Units
2.0
2.5
3.0
Head (m)
9
8
7
6
5
4
3
2
1
0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Flowrate l/min
Head (m)
8
6
4
Important
2
0
5.0
7.0
9.0
11.0
13.0
15.0
A float level switch shall be incorporated into the unit drain tray for indication of a high water alarm.
34
SmartCool 6 - 200kW
All sound data quoted has been measured in the third-octave band limited values, using a Real Time Analyser calibrated
sound intensity meter in accordance with BS EN ISO9614 Part 1: 1995.
All Sound Power Levels quoted are calculated from measured sound intensity according to BS EN ISO9614 Part 1:
1995.
Introduction
Semi Hemispherical
Sound Pressure Levels are calculated from sound power using the semi-hemispherical method where the noise source
is in junction with 2 boundaries i.e. the floor and 1 wall.
Free Field
For comparison, the semi hemispherical figures can typically be reduced by 6dB to provide free field conditions.
IMPORTANT
The sound data quoted is based on the unit having a ducted return air and standard backwards curved EC motors fitted,
refer to illustration below.
Case breakout sound data is therefore independent of the discharge air and return air sound data.
For non-ducted return air applications, the overall case breakout sound levels may increase, due to the return air sound
being predominant.
Within the conditioned space, sound from in-room ducted discharge air grilles and other equipment will contribute to the
overall sound level and should therefore be considered as part of sound calculations.
Specialist acoustic advice is recommended for noise critical applications.
(1)
(2)
(3)
(1)
(2)
(3)
Return Air
Case Breakout
Discharge Air
35
SmartCool 6 - 200kW
Installation Data
Dimensions
Installation
SN 06D - C000
171
600
570
165
270
165
342
15
684
171
15
654
M6 FIXINGS
EIGHT POSITIONS
600
684
1980
RETURN AIR
FRONT
DISCHARGE AIR
36
REAR
SmartCool 6 - 200kW
Installation Data
Dimensions
SN 09D - C000
Installation
240.8
600
570
165
270
165
481.5
15
963
240.8
933
15
RETURN AIR
600
1980
963
FRONT
REAR
DISCHARGE AIR
37
SmartCool 6 - 200kW
Installation Data
Dimensions
1242
621
310.5
570
600
165
270
165
310.5
15
Installation
SN 12D - C000
1212
15
RETURN AIR
600
1980
1242
FRONT
DISCHARGE AIR
38
REAR
SmartCool 6 - 200kW
Installation Data
Dimensions
SR 09D - C000 / C0C0
Installation
240.8
890
860
180
530
180
481.5
15
963
240.8
15
933
890
963
1980
RETURN AIR
FRONT
REAR
DISCHARGE AIR
39
SmartCool 6 - 200kW
Installation Data
Dimensions
Installation
310.5
890
860
180
530
180
621
15
1242
310.5
15
1212
890
1242
1980
RETURN AIR
FRONT
DISCHARGE AIR
40
REAR
SmartCool 6 - 200kW
Installation Data
Dimensions
SR 15D - C000 / C0C0
Installation
760.5
380.2
890
180
530
860
180
380.2
15
1521
15
1491
890
1521
1980
RETURN AIR
FRONT
REAR
DISCHARGE AIR
41
SmartCool 6 - 200kW
Installation Data
Dimensions
Installation
450
860
890
180
530
180
900
15
1800
450
15
1770
890
1800
1980
RETURN AIR
FRONT
DISCHARGE AIR
42
REAR
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 18 Single Circuit
RETURN AIR
Installation
900
1770
450
15
890
15
180
860
530
180
15
450
15
890
1980
1800
FLOOR LEVEL
600 MIN
FLOOR LEVEL
43
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 22 Single Circuit
Installation
RETURN AIR
1000
2170
600
15
530
15
180
860
180
15
600
15
2200
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
44
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 25 Single Circuit
600
600
1300
15
2470
15
180
860
530
180
15
15
Installation
RETURN AIR
2500
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
45
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 31 Single Circuit
Installation
RETURN AIR
1500
3070
800
15
530
15
180
860
180
15
800
15
890
1980
3100
FLOOR LEVEL
600 MIN
FLOOR LEVEL
46
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 35 Single Circuit
900
15
180 530 180
1700
3470
15
860
15
900
15
Installation
RETURN AIR
3500
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
47
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 18 Dual Circuit
Installation
RETURN AIR
15
900
1770
450
15
530
15
180
860
180
15
450
1800
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
48
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 22 Dual Circuit
600
1000
2170
600
15
530
15
180
860
180
15
15
Installation
RETURN AIR
2200
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
49
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 25 Dual Circuit
Installation
RETURN AIR
1300
2470
600
15
15
180
530
860
180
15
600
15
2500
1980
890
FLOOR LEVEL
600 MIN
FLOOR LEVEL
50
RETURN AIR
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 31 Dual Circuit
1500
3070
800
15
530
15
180
860
180
15
800
15
Installation
RETURN AIR
3100
1980
890
FLOOR LEVEL
589
FLOOR LEVEL
51
SmartCool 6 - 200kW
Installation Data
Dimensions
SD 35 Dual Circuit
Installation
RETURN AIR
1700
3470
900
530 180
15
15
180
860
15
900
15
890
1980
3500
FLOOR LEVEL
600 MIN
FLOOR LEVEL
52
SmartCool 6 - 200kW
Positioning
Installation
B
600
SN06D
mm
684
SN09D / SR09D
mm
963
880
SN12D / SR12D
mm
1242
880
SR15D
mm
1521
880
SR18D
mm
1800
880
C - Floorstand(3)
All Faces
SN06D
mm
720
500
380
250
SN09D / SR09D
mm
720
500
380
250
SN12D / SR12D
mm
720
500
380
250
SR15D
mm
740
550
440
280
SR18D
mm
750
590
480
300
Packed Dimensions
53
SmartCool 6 - 200kW
Installation
Positioning
B
880
SD18D
mm
1800
SD22D
mm
2200
880
SD25D
mm
2500
880
SD31D
mm
3100
880
SD35D
mm
3500
880
C - Floorstand(3)
SD18D
mm
Forward Only
All Faces
720
500
380
250
SD22D
mm
720
500
380
250
SD25D
mm
720
500
380
250
SD31D
mm
740
550
440
280
SD35D
mm
750
590
480
300
54
SmartCool 6 - 200kW
Pipework Schematics
SN Single Circuit
BL
BL
BL
BL
Installation
BI
SN06
2 COILS
M
WTS
DR
BI
BI
OPTIONAL
BI
BL
BINDER POINT
WTS
BLEED VALVE
DRAIN VALVE
SN12
4 COILS
OPTIONAL
M
DR
SN09
3 COILS
55
SmartCool 6 - 200kW
Pipework Schematics
SN Single Circuit
BL
BL
BL
Installation
BL
BI
SN06
2 COILS
OPTIONAL
WTS
BI
BL
DR
OPTIONAL
BINDER POINT
WTS
BLEED VALVE
M
DR
DRAIN VALVE
56
SN12
4 COILS
BI
OPTIONAL
BI
SN09
3 COILS
SmartCool 6 - 200kW
Pipework Schematics
SR Single Circuit
BL
BL
BL
BL
Installation
BL
BL
BI
SR09
3 COILS
SR12
4 COILS
SR15
5 COILS
SR18
6 COILS
M
WTS
DR
BI
BI
OPTIONAL
BI
BL
OPTIONAL
BINDER POINT
WTS
BLEED VALVE
M
DR
DRAIN VALVE
57
SmartCool 6 - 200kW
Pipework Schematics
SR Single Circuit
Installation
BL
BL
BL
BL
BL
BL
BI
SR09
3 COILS
M
WTS
OPTIONAL
BI
BL
OPTIONAL
BINDER POINT
WTS
BLEED VALVE
DRAIN VALVE
58
SR18
6 COILS
DR
M
DR
SR15
5 COILS
BI
OPTIONAL
BI
SR12
4 COILS
SmartCool 6 - 200kW
Pipework Schematics
SR Dual Circuit
OPTIONAL
OPTIONAL
BI
WTS
DR
Installation
BI
BI
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BI
SR09
3 COILS
M
WTS
DR
BI
BI
OPTIONAL
BI
BL
BINDER POINT
WTS
BLEED VALVE
DRAIN VALVE
SR15
5 COILS
SR18
6 COILS
OPTIONAL
M
DR
SR12
4 COILS
59
SmartCool 6 - 200kW
Pipework Schematics
SR Dual Circuit
OPTIONAL
Installation
OPTIONAL
BI
BI
WTS
DR
M
OPTIONAL
BI
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BI
SR09
3 COILS
M
WTS
DR
BI
BI
OPTIONAL
BI
BL
BINDER POINT
WTS
SR18
6 COILS
BLEED VALVE
DRAIN VALVE
60
SR15
5 COILS
OPTIONAL
M
DR
SR12
4 COILS
SmartCool 6 - 200kW
Pipework Schematics
SD Single Circuit
INLET LEG
PDZAL
OPTIONAL BYPASS
LEG
BL
BI
Installation
CHILLED WATER
COIL
WTS
DR
BL
DR
OUTLET LEG
M
BI
SD Dual Circuit
CIRCUIT 1
CIRCUIT 2
INLET LEG
INLET LEG
DR
OUTLET LEG
BL
BL
DR
BI
BINDER POINT
BL
BLEED VALVE
DR
WTS
OUTLET LEG
BL
DRAIN VALVE
WATER
TEMPERATURE
SENSOR
DR
BI
WTS BI
DR
PDZAL
BL
OPTIONAL BYPASS
LEG
BL
CHILLED WATER
COIL
DR
PDZAL
WTS
CHILLED WATER
COIL
BI
2 WAY
REGULATING
BALL VALVE
(ACTUATOR
DRIVEN)
BI
PDZAL
DIFFERENTIAL
PRESSURE TRANDUCER
CENTRIFUGAL FAN
61
SmartCool 6 - 200kW
Incoming Services
SN Single Circuit
FRONT OF UNIT
70
72
93
186
272
105
179
80
600
521
92
451
Installation
79
163.8
684
A
B
E
F
G
H
J
Incoming Services
SR Single Circuit
79
75
FRONT OF UNIT
811
343
199
129
254
105
80
632.5
890
92
98
216
963
A
B
E
F
G
H
J
62
SmartCool 6 - 200kW
SR Dual Circuit
G
E
98
75
FRONT OF UNIT
890
199
111
105
343
408
80
632.5
B
259
811
Installation
92
C
556
79
216
1800
A
B
C
D
E
F
G
H
J
FRONT OF
UNIT
CONDENSATE
DRAIN
HUMIDIFIER
DRAIN
FLOOR
LEVEL
HUMIDIFIER
FILL
POWER IN
CUSTOMER POWER
CONNECTIONS
CONTROLS
IN
CONDENSATE PUMP
(OPTIONAL)
63
SmartCool 6 - 200kW
Incoming Services
170
1980
Installation
SD Single Circuit
90 298
FLOOR LEVEL
FLOOR LEVEL
106
WATER INLET
247
WATER OUTLET
H VARIES
CLIENT SPECIFIED FLOOR VOID
238
115
170
236
115
FLOOR LEVEL
90
368
FLOOR LEVEL
170
1980
SD Dual Circuit
WATER INLET
CIRCUIT 1
WATER INLET
CIRCUIT 2 WATER OUTLET
CIRCUIT 1
WATER OUTLET
CIRCUIT 2
H VARIES
CLIENT SPECIFIED FLOOR VOID
64
108
SmartCool 6 - 200kW
Glycol
Specific Heat Capacity (Cp) (kj/kg K)
Water/Glycol
Temperature C
10% / -4C
20% / -9C
30% / -15C
40% / -23C
Cp
Cp
Cp
Cp
Cp
4.183
3.972
3.815
3.645
3.468
4.181
3.981
3.826
3.660
3.485
30
4.179
3.989
3.838
3.674
3.502
35
4.178
3.998
3.849
3.688
3.518
40
4.179
4.007
3.861
3.702
3.535
45
4.181
4.015
3.872
3.716
3.552
0% / 0C
10% / -4C
20% / -9C
30% / -15C
40% / -23C
20
998
1013
1030
1045
1060
25
997
1012
1028
1043
1058
30
996
1010
1026
1041
1055
35
994
1008
1024
1039
1053
40
992
1006
1022
1036
1050
45
990
1003
1020
1035
1048
Installation
20
25
Density () (kg/m)
Water/Glycol
Temperature C
20
10%
20%
30%
40%
Px
Px
Px
Px
Px
0.983
1.0125
1.054
1.0958
1.15
65
SmartCool 6 - 200kW
SN06D010-C000-0
Technical
SN06D015-C000-0
SN09D020-C000-0
SN
SN09D025-C000-0
SN12D030-C000-0
10 / 15 C
8 / 14 C
66
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
11.0
9.7
7.1
7.1
8.0
8.0
4.0
4.0
24 / 45
12.8
11.4
8.7
8.7
9.3
9.2
7.9
7.9
26 / 40
14.5
13.0
10.3
10.3
10.9
10.6
9.5
9.5
22 / 50
14.4
13.1
9.6
9.6
10.9
10.9
8.5
8.5
24 / 45
16.8
15.3
11.8
11.8
12.7
12.7
10.7
10.7
26 / 40
18.9
17.5
13.9
13.9
14.7
14.7
12.8
12.8
22 / 50
18.6
16.7
12.2
12.2
14.1
14.1
10.7
10.7
24 / 45
21.7
19.5
15.0
15.0
16.0
16.0
13.6
13.6
26 / 40
24.5
22.2
17.7
17.7
18.7
18.4
16.3
16.3
22 / 50
23.0
21.2
15.5
15.5
17.6
17.6
13.7
13.7
24 / 45
26.9
24.8
19.1
19.1
21.5
21.5
17.3
17.3
26 / 40
30.4
28.3
22.5
22.5
24.0
24.0
20.7
20.7
22 / 50
26.9
24.3
17.8
17.8
20.4
20.4
15.6
15.6
24 / 45
31.3
28.3
21.8
21.8
23.4
23.4
19.8
19.8
26 / 40
35.4
32.3
25.7
25.7
27.1
27.0
23.7
23.7
22 / 50
31.1
28.7
21.0
21.0
23.8
23.8
18.5
18.5
24 / 45
36.3
33.5
25.8
25.8
29.0
29.0
23.4
23.4
26 / 40
41.0
38.3
30.4
30.4
32.5
32.5
28.0
28.0
C0C0
C000
SN12D035-C000-0
7 / 12 C
SmartCool 6 - 200kW
SN06D010-C000-0
SN06D015-C000-0
SN09D025-C000-0
SN12D035-C000-0
18 / 24 C
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26.7
13.5
13.5
10.9
10.9
7.9
7.9
6.3
6.3
35 / 23.9
14.8
14.8
12.2
12.2
9.1
9.1
7.6
7.6
37 / 21.4
16.1
16.1
13.4
13.4
10.3
10.3
8.7
8.7
33 / 26.7
18.3
18.3
14.8
14.8
10.6
10.6
8.5
8.5
35 / 23.9
20.1
20.1
16.5
16.5
12.2
12.2
10.2
10.2
37 / 21.4
21.8
21.8
18.2
18.2
13.8
13.8
11.8
11.8
33 / 26.7
23.3
23.3
18.8
18.8
13.5
13.5
10.9
10.9
35 / 23.9
25.5
25.5
21.0
21.0
15.6
15.6
13.0
13.0
37 / 21.4
27.7
27.7
23.1
23.1
17.6
17.6
15.0
15.0
33 / 26.7
29.7
29.7
23.9
23.9
17.1
17.1
13.8
13.8
35 / 23.9
32.6
32.6
26.7
26.7
19.8
19.8
16.5
16.5
37 / 21.4
35.4
35.4
29.5
29.5
22.4
22.4
19.0
19.0
33 / 26.7
33.9
33.9
27.3
27.3
19.6
19.6
15.8
15.8
35 / 23.9
37.2
37.2
30.5
30.5
22.7
22.7
18.9
18.9
37 / 21.4
40.3
40.3
33.6
33.6
25.6
25.6
21.8
21.8
33 / 26.7
40.1
40.1
32.3
32.3
23.1
23.1
18.6
18.6
35 / 23.9
44.1
44.1
36.2
36.2
26.8
26.8
22.3
22.3
37 / 21.4
47.8
47.8
39.8
39.8
30.3
30.3
25.8
25.8
SN
SN12D030-C000-0
15 / 20 C
Technical
SN09D020-C000-0
12 / 17 C
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
67
SmartCool 6 - 200kW
SN06D010-C000
Mechanical Data
SN06D010-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
68
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN06D010-C000-1
SN06D010-C000-2
12.8
0.25
12.8
12.8
0.25
0.25
684 x 600 x 1980
181 / 194
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
13
13
13
0.61
0.61
0.61
18.7
18.7
18.7
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 0.78
1 x 0.78
1 x 0.78
rpm
Pa
m/s
1954 / 2680
552
0.70
1954 / 2680
552
0.70
1954 / 2680
552
0.70
mm
mm
22
22
22
22
kW
6
3.0
22
22
Disposable to BS EN 779-G4
6
2.7
kg/hr
l/m
6
3.0
3
7
3
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
3
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN06D010-C000
Electrical Data
Unit Data - Full Function
SN06D010-C000-0
SN06D010-C000-1
SN06D010-C000-2
(1)
10.3
10.3
18.9
16
16
25
5.02
2.55
2.55
10
10
10
mm
16
16
16
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 0.78
1 x 0.78
1 x 0.78
1.6
1.6
3.1
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
3.0
2.7
3.0
4.4
4.2
7.9
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
69
SmartCool 6 - 200kW
SN06D015-C000
Mechanical Data
SN06D015-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
70
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN06D015-C000-1
SN06D015-C000-2
16.8
0.62
16.8
16.8
0.62
0.62
684 x 600 x 1980
181 / 194
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
13
13
13
0.80
0.80
0.80
31.8
31.8
31.8
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 0.78
1 x 0.78
1 x 0.78
rpm
Pa
m/s
2590 / 2680
87
0.95
2590 / 2680
87
0.95
2590 / 2680
87
0.95
mm
mm
22
22
22
22
kW
6
3.0
22
22
Disposable to BS EN 779-G4
6
2.7
kg/hr
l/m
6
3.0
3
7
3
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
3
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN06D015-C000
Electrical Data
Unit Data - Full Function
SN06D015-C000-0
SN06D015-C000-1
SN06D015-C000-2
(1)
10.3
10.3
18.9
16
16
25
5.02
2.55
2.55
10
10
10
mm
16
16
16
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 0.78
1 x 0.78
1 x 0.78
1.6
1.6
3.1
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
3.0
2.7
3.0
4.4
4.2
7.9
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
71
SmartCool 6 - 200kW
SN09D020-C000
Mechanical Data
SN09D020-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
72
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN09D020-C000-1
SN09D020-C000-2
21.7
0.65
21.7
21.7
0.65
0.59
963 x 600 x 1980
242 / 262
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
19
19
19
1.03
1.03
1.03
23.2
23.2
23.2
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.5
1 x 2.5
1 x 1.9
rpm
Pa
m/s
2120 / 2970
1126
1.20
2120 / 2970
1126
1.20
2013 / 2720
831
1.20
mm
mm
28
22
28
22
kW
9
6.0
28
22
Disposable to BS EN 779-G4
9
5.4
kg/hr
l/m
9
6.0
8
7
8
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
8
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN09D020-C000
Electrical Data
Unit Data - Full Function
SN09D020-C000-0
SN09D020-C000-1
SN09D020-C000-2
(1)
22.4
22.5
39.4
32
32
50
7.8
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 1.96
1 x 1.96
1 x 1.96
5.8
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
6.0
5.4
6.0
8.7
8.3
15.8
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
73
SmartCool 6 - 200kW
SN09D025-C000
Mechanical Data
SN09D025-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
74
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN09D025-C000-1
SN09D025-C000-2
26.9
1.32
26.9
26.5
1.32
1.18
963 x 600 x 1980
242 / 262
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
19
19
19
1.28
1.28
1.26
35.4
35.4
34.4
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.5
1 x 2.5
1 x 1.9
rpm
Pa
m/s
2474 / 2970
618
1.55
2474 / 2970
618
1.55
2515 / 2720
310
1.55
mm
mm
28
22
28
22
kW
9
6.0
28
22
Disposable to BS EN 779-G4
9
5.4
kg/hr
l/m
9
6.0
8
7
8
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
8
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN09D025-C000
Electrical Data
Unit Data - Full Function
SN09D025-C000-0
SN09D025-C000-1
SN09D025-C000-2
(1)
22.4
22.5
39.4
32
32
50
7.8
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.5
1 x 2.5
1 x 1.9
5.8
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
6.0
5.4
6.0
8.7
8.3
15.8
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
75
SmartCool 6 - 200kW
SN12D030-C000
Mechanical Data
SN12D030-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
76
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN12D030-C000-1
SN12D030-C000-2
31.3
0.99
31.3
29.0
0.99
0.78
1242 x 600 x 1980
294 / 319
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
25
25
25
1.49
1.49
1.38
24.8
24.8
21.4
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.4
1 x 2.4
1 x 1.95
rpm
Pa
m/s
1985 / 2400
589
1.75
1985 / 2400
589
1.75
1818 / 2250
557
1.60
mm
mm
35
22
35
22
kW
12
6.0
35
22
Disposable to BS EN 779-G4
12
5.4
kg/hr
l/m
12
6.0
8
7
8
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
8
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN12D030-C000
Electrical Data
Unit Data - Full Function
SN12D030-C000-0
SN12D030-C000-1
SN12D030-C000-2
(1)
22.3
22.4
39.5
32
32
50
7.9
4.9
4.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.4
1 x 2.4
1 x 1.95
3.9
3.9
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
6.0
5.4
6.0
8.7
8.3
15.8
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
77
SmartCool 6 - 200kW
SN12D035-C000
Mechanical Data
SN12D035-C000-0
C0C0
C000
SN
Technical
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
78
Material / Colour
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP /
Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
SN12D035-C000-1
SN12D035-C000-2
36.3
1.75
36.3
33.5
1.75
1.31
1242 x 600 x 1980
294 / 319
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
25
25
25
1.73
1.73
1.60
32.9
32.9
28.2
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.4
1 x 2.4
1 x 1.95
rpm
Pa
m/s
2361 / 2400
85
2.10
2361 / 2400
85
2.10
2138 / 2250
183
1.90
mm
mm
35
22
35
22
kW
12
6.0
35
22
Disposable to BS EN 779-G4
12
5.4
kg/hr
l/m
12
6.0
8
7
8
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
8
7
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SN12D035-C000
Electrical Data
Unit Data - Full Function
SN12D035-C000-0
SN12D035-C000-1
SN12D035-C000-2
(1)
22.3
22.4
39.5
32
32
50
7.9
4.9
4.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.4
1 x 2.4
1 x 1.95
3.9
3.9
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
6.0
5.4
6.0
8.7
8.3
15.8
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SN
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
79
SmartCool 6 - 200kW
Technical
120
100
80
60
40
20
0
SN
0.00
1
2
3
0.50
1.00
1.50
2.00
2.50
3.00
3.50
SN06D010-C000 / SN06D015-C000
SN09D020-C000 / SN09D025-C000
SN12D030-C000 / SN12D035-C000
C0C0
C000
Q
M
80
Valve Kv
SN06 C000
10.0
0.28
SN09 C000
16.0
0.44
SN12 C000
25.0
0.69
SmartCool 6 - 200kW
Technical Data
Sound Data
SN06D010-C000
SN06D015-C000
125
250
500
1000
2000
4000
8000
Discharge Air
70
64
66
71
69
64
58
51
27
Return Air
68
64
66
69
68
63
58
50
26
Case Breakout
70
68
71
72
69
64
58
51
30
Sound Pressure @ 3m
56
53
57
58
54
50
44
37
15
Discharge Air
81
75
76
81
80
75
69
62
38
Return Air
79
75
76
79
79
73
68
61
37
Case Breakout
81
79
82
83
80
75
69
62
41
Sound Pressure @ 3m
66
64
67
68
65
61
54
48
26
Discharge Air
69
68
70
74
69
60
57
51
34
Return Air
68
68
70
72
68
58
56
50
34
Case Breakout
70
72
75
76
68
60
56
52
37
Sound Pressure @ 3m
56
57
61
61
54
45
42
37
23
Discharge Air
76
73
72
82
75
67
63
57
40
Return Air
75
73
72
80
74
65
62
56
SN09D025-C000
39
Case Breakout
77
77
77
83
74
67
63
57
43
Sound Pressure @ 3m
62
62
63
69
60
52
48
43
29
Discharge Air
69
65
72
73
67
60
57
56
37
Return Air
68
65
72
71
66
58
56
55
SN12D030-C000
36
Case Breakout
70
69
78
75
67
60
57
57
40
Sound Pressure @ 3m
55
55
63
60
52
45
42
42
26
Discharge Air
73
64
74
78
71
64
62
58
44
Return Air
72
64
73
76
70
62
61
57
SN12D035-C000
43
Case Breakout
74
68
79
79
71
64
61
58
47
Sound Pressure @ 3m
59
53
64
65
56
49
47
44
32
SN
63
Technical
SN09D020-C000
Frequency (Hz) dB
Overall
dB(A)
Sound Measurement
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
81
SmartCool 6 - 200kW
N1
Neutral (Supply 1)
301
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
C0C0
C000
SN
Technical
CONN17
WIRE
1
2
3
4
502
583 or 584
2
N or 3
PIN 1
Conn 17
CONN14
Conn 14
PIN No.
WIRE
1
2
3
4
5
6
7
502
522
560
561
563
564
565
PIN 1
Conn 16
CONN16
PIN No.
WIRE
1
2
3
4
5
6
7
8
2
N or 3
534
535
609
610
810
811
PIN 1
Conn 14
CONN15
Conn 15
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
82
PIN No.
PIN 1
PIN No.
WIRE
1
2
3
881
882
883
SmartCool 6 - 200kW
Intentionally Blank
Technical
SN
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
83
SmartCool 6 - 200kW
SR09D030-C000-0
Technical
SR09D040-C000-0
SR12D045-C000-0
SR
SR12D055-C000-0
SR15D065-C000-0
SR15D075-C000-0
C0C0
C000
SR18D080-C000-0
84
SR18D095-C000-0
Air On
7 / 12 C
10 / 15 C
8 / 14 C
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
30.0
26.1
19.3
19.3
21.4
20.6
17.3
17.3
24 / 45
34.7
30.4
23.5
23.5
26.9
26.1
21.6
21.6
26 / 40
39.0
34.5
27.6
27.6
29.3
27.3
25.6
25.6
22 / 50
36.6
32.5
24.0
24.0
26.4
25.9
21.5
21.5
24 / 45
42.3
37.7
29.2
29.2
31.6
30.1
26.8
26.8
26 / 40
47.6
43.0
34.3
34.3
36.6
34.7
31.8
31.8
22 / 50
43.5
38.2
28.2
28.2
31.2
30.2
25.3
25.3
24 / 45
50.3
44.4
34.4
34.4
38.9
37.8
31.5
31.5
26 / 40
56.6
50.5
40.3
40.3
42.9
40.3
37.4
37.4
22 / 50
51.9
46.4
34.3
34.3
37.6
37.3
30.8
30.8
24 / 45
60.1
54.0
41.8
41.8
45.2
43.3
38.3
38.3
26 / 40
67.6
61.5
49.0
49.0
52.3
50.1
45.5
45.5
22 / 50
60.4
53.6
39.7
39.7
43.7
42.8
35.6
35.6
24 / 45
70.0
62.4
48.3
48.3
52.3
49.7
44.3
44.3
26 / 40
78.7
71.0
56.6
56.6
60.4
57.4
52.6
52.6
22 / 50
65.8
59.0
43.6
43.6
47.8
47.5
39.1
39.1
24 / 45
76.3
68.6
53.1
53.1
57.4
55.2
48.7
48.7
26 / 40
85.8
78.2
62.3
62.3
66.4
63.8
57.8
57.8
22 / 50
73.1
64.9
48.0
48.0
52.8
51.9
43.1
43.1
24 / 45
84.6
75.5
58.4
58.4
63.2
60.2
53.6
53.6
26 / 40
95.2
85.9
68.5
68.5
73.1
69.5
63.7
63.7
22 / 50
84.7
76.7
56.6
56.6
62.2
62.2
50.8
50.8
24 / 45
98.3
89.3
69.0
69.0
74.4
72.4
63.3
63.3
26 / 40
110.7
101.7
81.1
81.1
86.2
83.7
75.1
75.1
SmartCool 6 - 200kW
SR09D030-C000-0
SR09D040-C000-0
SR12D055-C000-0
SR15D075-C000-0
SR18D080-C000-0
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26.7
36.0
36.0
29.1
29.1
21.1
21.1
17.1
17.1
35 / 23.9
39.4
39.4
32.5
32.5
24.3
24.3
20.4
20.4
37 / 21.4
42.7
42.7
35.7
35.7
27.4
27.4
23.4
23.4
33 / 26.7
44.9
44.9
36.3
36.3
26.2
26.2
21.2
21.2
35 / 23.9
49.2
49.2
40.5
40.5
30.2
30.2
25.3
25.3
37 / 21.4
53.3
53.3
44.5
44.5
34.1
34.1
29.1
29.1
33 / 26.7
52.7
52.7
42.6
42.6
30.8
30.8
25.0
25.0
35 / 23.9
57.7
57.7
47.5
47.5
35.5
35.5
29.7
29.7
37 / 21.4
62.5
62.5
52.2
52.2
40.0
40.0
34.2
34.2
33 / 26.7
64.2
64.2
51.9
51.9
37.4
37.4
30.3
30.3
35 / 23.9
70.4
70.4
57.9
57.9
43.2
43.2
36.1
36.1
37 / 21.4
76.4
76.4
63.7
63.7
48.7
48.7
41.5
41.5
33 / 26.7
74.2
74.2
59.9
59.9
43.3
43.3
35.1
35.1
35 / 23.9
81.2
81.2
66.9
66.9
49.9
49.9
41.7
41.7
37 / 21.4
88.1
88.1
73.5
73.5
56.3
56.3
48.0
48.0
33 / 26.7
81.7
81.7
66.0
66.0
47.6
47.6
38.5
38.5
35 / 23.9
89.5
89.5
73.7
73.7
54.9
54.9
45.9
45.9
37 / 21.4
97.1
97.1
81.0
81.0
61.9
61.9
52.8
52.8
33 / 26.7
89.8
89.8
72.6
72.6
52.4
52.4
42.4
42.4
35 / 23.9
98.4
98.4
80.9
80.9
60.4
60.4
50.5
50.5
37 / 21.4
106.6
106.6
89.0
89.0
68.1
68.1
58.1
58.1
33 / 26.7
106.3
106.3
85.8
85.8
61.8
61.8
50.0
50.0
35 / 23.9
116.6
116.6
95.9
95.9
71.4
71.4
59.6
59.6
37 / 21.4
126.5
126.5
105.5
105.5
80.5
80.5
68.7
68.7
C0C0
C000
SR18D095-C000-0
18 / 24 C
SR
SR15D065-C000-0
15 / 20 C
Technical
SR12D045-C000-0
12 / 17 C
85
SmartCool 6 - 200kW
SR09D030-C000
Mechanical Data
SR09D030-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material/Colour
86
Cooling Coil
Cooling/Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR09D030-C000-2
34.7
0.8
34.7
34.7
0.8
0.8
963 x 890 x 1980
307 / 337
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
30
30
30
1.65
1.65
1.65
25.9
25.9
25.9
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 1.96
1 x 1.96
1 x 1.96
1174 / 1560
1174 / 1560
1174 / 1560
463
463
463
1.85
1.85
1.85
mm
mm
35
22
kW
9
7.5
kg/hr
l/m
SR09D030-C000-1
8
7
35
22
Disposable to BS EN 779-G4
9
6.8
35
22
9
7.5
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
1 x 3.6
1521 / 2260
1010
4
1.7
(4) kW
rpm
Pa
1 x 3.6
1521 / 2260
1010
1 x 3.6
1527 / 2260
1010
SmartCool 6 - 200kW
SR09D030-C000
Electrical Data
Unit Data - Full Function
SR09D030-C000-0
SR09D030-C000-1
SR09D030-C000-2
(1)
26.4
26.3
48.5
32
32
63
7.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 1.96
1 x 1.96
1 x 1.96
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.77
7.5
10.9
10.3
19.7
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
1 x 3.6
1 x 3.6
1 x 3.6
5.8
5.8
11
SR
Capacity
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
87
SmartCool 6 - 200kW
SR09D040-C000
Mechanical Data
SR09D040-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
88
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR09D040-C000-2
42.3
1.45
42.3
42.3
1.45
1.45
963 x 890 x 1980
307 / 337
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
30
30
30
2.01
2.01
2.01
37.4
37.4
37.4
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 1.96
1 x 1.96
1 x 1.96
1440 / 1560
1440 / 1560
1440 / 1560
202
202
202
2.30
2.30
2.30
mm
mm
35
22
kW
9
7.5
kg/hr
l/m
SR09D040-C000-1
8
7
35
22
Disposable to BS EN 779-G4
9
6.8
35
22
9
7.5
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
1 x 3.6
1863 / 2260
678
4
1.7
(4) kW
rpm
Pa
1 x 3.6
1863 / 2260
678
1 x 3.6
1932 / 2260
547
SmartCool 6 - 200kW
SR09D040-C000
Electrical Data
Unit Data - Full Function
SR09D040-C000-0
SR09D040-C000-1
SR09D040-C000-2
(1)
26.4
26.3
48.5
32
32
63
7.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 1.96
1 x 1.96
1 x 1.96
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.77
7.5
10.9
10.3
19.7
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
1 x 3.6
1 x 3.6
1 x 3.6
5.8
5.8
11
SR
Capacity
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
89
SmartCool 6 - 200kW
SR12D045-C000
Mechanical Data
SR12D045-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
90
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR12D045-C000-2
50.3
1.25
50.3
50.3
1.25
1.25
1242 x 890 x 1980
380 / 420
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
40
40
40
2.4
2.4
2.4
30.8
30.8
30.8
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.9
1 x 2.9
1 x 2.9
1313 / 1660
1313 / 1660
1313 / 1660
508
508
508
2.70
2.70
2.70
mm
mm
42
22
kW
12
15.0
kg/hr
l/m
SR12D045-C000-1
8
7
42
22
Disposable to BS EN 779-G4
12
13.5
42
22
12
7.5
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR12D045-C000
Electrical Data
Unit Data - Full Function
SR12D045-C000-0
SR12D045-C000-1
SR12D045-C000-2
(1)
35.8
35.2
64.7
50
50
80
5.43
5.43
9.5
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.9
1 x 2.9
1 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
15
13.54
15
21.7
20.6
39.4
8
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
91
SmartCool 6 - 200kW
SR12D055-C000
Mechanical Data
SR12D055-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
92
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR12D055-C000-2
60.1
2.34
60.1
60.1
2.34
2.34
1242 x 890 x 1980
380 / 420
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
40
40
40
2.86
2.86
2.86
41.9
41.9
41.9
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.9
1 x 2.9
1 x 2.9
1592 / 1660
1592 / 1660
1592 / 1660
129
129
129
3.30
3.30
3.30
mm
mm
42
22
kW
12
15.0
kg/hr
l/m
SR12D055-C000-1
8
7
42
22
Disposable to BS EN 779-G4
12
13.5
42
22
12
7.5
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
N/A
N/A
N/A
N/A
4
1.7
(4) kW
rpm
Pa
N/A
N/A
N/A
N/A
N/A
N/A
SmartCool 6 - 200kW
SR12D055-C000
Electrical Data
Unit Data - Full Function
SR12D055-C000-0
SR12D055-C000-1
SR12D055-C000-2
(1)
35.8
35.2
64.7
50
50
80
5.43
5.43
9.5
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.9
1 x 2.9
1 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
15
13.54
15
21.7
20.6
39.4
8
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
93
SmartCool 6 - 200kW
SR15D065-C000
Mechanical Data
SR15D065-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
94
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR15D065-C000-2
70.0
2.12
70.0
70.0
2.12
2.12
1521 x 890 x 1980
461 / 512
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
51
51
51
3.33
3.33
3.33
46.8
46.8
46.8
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 1.96
2 x 1.96
2 x 1.96
1276 / 1560
1276 / 1560
1276 / 1560
354
354
354
3.80
3.80
3.80
mm
mm
42
22
kW
15
15.0
kg/hr
l/m
SR15D065-C000-1
15
7
42
22
Disposable to BS EN 779-G4
15
13.5
42
22
15
15.0
15
15
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
2 x 3.6
1632 / 2260
903
4
1.7
(4) kW
rpm
Pa
2 x 3.6
1632 / 2260
903
2 x 3.6
1701 / 2260
854
SmartCool 6 - 200kW
SR15D065-C000
Electrical Data
Unit Data - Full Function
SR15D065-C000-0
SR15D065-C000-1
SR15D065-C000-2
(1)
50.6
50.3
93
63
63
125
13.8
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 1.96
2 x 1.96
2 x 1.96
5.9
Stage of Reheat
Number of Elements
15
13.54
15
21.7
20.6
39.4
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
Technical
Humidifier
kg/hr
15
15
15
kW
11.25
11.25
11.25
16.3
17.1
29.6
2 x 3.6
2 x 3.6
2 x 3.6
5.8
5.8
11
SR
Capacity
Rating
First upgrade EC Motor - Per Fan
Quantity x Motor Size
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
95
SmartCool 6 - 200kW
SR15D075-C000
Mechanical Data
SR15D075-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
96
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR15D075-C000-2
76.3
2.79
76.3
76.3
2.79
2.79
1521 x 890 x 1980
461 / 512
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
51
51
51
3.63
3.63
3.63
54.4
54.4
54.4
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 1.96
2 x 1.96
2 x 1.96
1400 / 1560
1400 / 1560
1400 / 1560
227
227
227
4.20
4.20
4.20
mm
mm
42
22
kW
15
15.0
kg/hr
l/m
SR15D075-C000-1
15
7
42
22
Disposable to BS EN 779-G4
15
13.5
42
22
15
15.0
15
15
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
2 x 3.6
1792 / 2260
753
4
1.7
(4) kW
rpm
Pa
2 x 3.6
1792 / 2260
753
2 x 3.6
1865 / 2260
660
SmartCool 6 - 200kW
SR15D075-C000
Electrical Data
Unit Data - Full Function
SR15D075-C000-0
SR15D075-C000-1
SR15D075-C000-2
(1)
50.6
50.3
93
63
63
125
13.8
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 1.96
2 x 1.96
2 x 1.96
5.9
Stage of Reheat
Number of Elements
15
13.54
15
21.7
20.6
39.4
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
Technical
Humidifier
kg/hr
15
15
15
kW
11.25
11.25
11.25
16.3
17.1
29.6
2 x 3.6
2 x 3.6
2 x 3.6
5.8
5.8
11
SR
Capacity
Rating
First upgrade EC Motor - Per Fan
Quantity x Motor Size
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
97
SmartCool 6 - 200kW
SR18D080-C000
Mechanical Data
SR18D080-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
98
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR18D080-C000-2
84.6
2.22
84.6
84.6
2.22
2.22
1800 x 890 x 1980
528 / 593
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
65
65
65
4.03
4.03
4.03
35.3
35.3
35.3
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1227 / 1660
1227 / 1660
1227 / 1660
557
557
557
4.60
4.60
4.60
mm
mm
54
22
kW
18
22.5
kg/hr
l/m
SR18D080-C000-1
15
7
54
22
Disposable to BS EN 779-G4
18
20.3
54
22
18
22.5
15
15
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR18D080-C000
Electrical Data
Unit Data - Full Function
SR18D080-C000-0
SR18D080-C000-1
SR18D080-C000-2
(1)
58.7
57.9
105.7
80
80
125
9.86
9.86
17
16
16
20
mm
Mains Supply
70
70
70
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
22.5
20.31
22.5
32.5
30.9
59.1
Technical
Humidifier
kg/hr
15
15
15
kW
11.25
11.25
11.25
16.3
17.1
29.6
SR
Capacity
Rating
First upgrade EC Motor - Per Fan
Quantity x Motor Size
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
99
SmartCool 6 - 200kW
SR18D095-C000
Mechanical Data
SR18D095-C000-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
C000
SR
Technical
Material / Colour
100
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR18D095-C000-2
98.3
3.8
98.3
98.3
3.8
3.8
1800 x 890 x 1980
528 / 593
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
65
65
65
4.68
4.68
4.68
46.3
46.3
46.3
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1455 / 1660
1455 / 1660
1455 / 1660
325
325
325
5.50
5.50
5.50
mm
mm
54
22
kW
18
22.5
kg/hr
l/m
SR18D095-C000-1
15
7
54
22
Disposable to BS EN 779-G4
18
20.3
54
22
18
22.5
15
15
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR18D095-C000
Electrical Data
Unit Data - Full Function
SR18D095-C000-0
SR18D095-C000-1
SR18D095-C000-2
(1)
58.7
57.9
105.7
80
80
125
9.86
9.86
17
16
16
20
mm
Mains Supply
70
70
70
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
22.5
20.31
22.5
32.5
30.9
59.1
Technical
Humidifier
kg/hr
15
15
15
kW
11.25
11.25
11.25
16.3
17.1
29.6
SR
Capacity
Rating
First upgrade EC Motor - Per Fan
Quantity x Motor Size
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
101
SmartCool 6 - 200kW
180
6
160
140
Technical
120
100
80
60
SR
40
20
0
0.00
C0C0
C000
4
5
6
7
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
P valve =
where
P = Pressure Drop in kPa,
Kv
102
Valve Kv
SR09 C000
25.0
0.69
SR12 C000
40.0
1.11
SR15 C000
40.0
1.11
SR18 C000
63.0
1.75
SmartCool 6 - 200kW
SR09D030-C000
SR09D040-C000
63
125
250
500
1000
2000
4000
Discharge Air
74
73
71
72
73
71
65
56
26
Return Air
73
73
71
71
71
69
64
55
25
SR12D055-C000
SR15D075-C000
SR18D080-C000
75
76
76
74
72
71
64
56
29
60
62
62
60
58
56
50
42
14
Discharge Air
80
78
77
78
78
76
70
61
31
Return Air
78
78
77
76
77
74
69
60
31
Case Breakout
80
82
82
80
78
76
70
62
34
Sound Pressure @ 3m
65
67
67
65
63
62
55
47
20
Discharge Air
76
73
76
75
74
73
67
61
37
Return Air
75
73
76
73
73
71
66
60
36
Case Breakout
77
76
81
77
74
73
66
61
40
Sound Pressure @ 3m
62
62
67
62
59
58
52
47
25
Discharge Air
82
78
81
80
79
79
73
67
43
Return Air
81
78
81
79
78
77
72
66
42
Case Breakout
82
82
87
82
79
79
72
67
46
Sound Pressure @ 3m
68
67
72
68
64
64
58
53
31
Discharge Air
79
78
76
77
78
76
70
61
31
Return Air
78
78
76
76
77
74
69
60
30
Case Breakout
80
81
82
79
77
76
69
61
34
Sound Pressure @ 3m
65
67
67
65
63
61
55
47
19
Discharge Air
82
80
79
80
80
78
72
63
34
Return Air
81
80
79
78
79
77
72
62
33
Case Breakout
82
84
84
82
80
78
72
64
37
Sound Pressure @ 3m
68
69
70
67
65
64
57
49
22
Discharge Air
78
74
77
76
75
74
68
62
38
Return Air
76
74
77
74
74
72
67
61
37
Case Breakout
78
78
82
78
75
74
68
62
41
Sound Pressure @ 3m
64
63
68
64
60
60
53
48
27
Discharge Air
82
78
82
81
80
79
73
67
43
Return Air
81
79
82
79
79
77
72
66
42
Case Breakout
83
82
87
83
79
79
72
67
46
Sound Pressure @ 3m
68
68
72
68
65
64
58
53
31
C0C0
C000
SR18D095-C000
Case Breakout
Sound Pressure @ 3m
SR
SR15D065-C000
8000
Technical
SR12D045-C000
Frequency (Hz) dB
Overall
dB(A)
Sound Measurement
103
SmartCool 6 - 200kW
SR
Technical
Interconnecting Wiring
N1
Neutral (Supply 1)
301
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
C0C0
C000
609
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
610
CONN17
WIRE
1
2
3
4
502
583 or 584
2
N or 3
PIN 1
Conn 17
CONN14
Conn 14
PIN No.
WIRE
1
2
3
4
5
6
7
502
522
560
561
563
564
565
PIN 1
CONN16
Conn 16
PIN No.
WIRE
1
2
3
4
5
6
7
8
2
N or 3
534
535
609
610
810
811
PIN 1
Conn 14
CONN15
Conn 15
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
104
PIN No.
PIN 1
PIN No.
WIRE
1
2
3
881
882
883
SmartCool 6 - 200kW
Intentionally Blank
Technical
SR
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
105
SmartCool 6 - 200kW
SR09D020-C0C0-0
Technical
SR09D025-C0C0-0
SR12D030-C0C0-0
SR
SR12D035-C0C0-0
SR15D040-C0C0-0
SR15D045-C0C0-0
C0C0
SR18D050-C0C0-0
106
SR18D060-C0C0-0
7 / 12 C
10 / 15 C
8 / 14 C
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
21.5
21.5
15.3
15.3
17.2
17.2
13.1
13.1
24 / 45
25.3
25.3
19.1
19.1
21.0
21.0
17.0
17.0
26 / 40
29.1
29.1
22.7
22.7
24.7
24.7
20.7
20.7
22 / 50
25.9
25.9
18.4
18.4
20.8
20.8
15.9
15.9
24 / 45
30.5
30.5
23.0
23.0
25.3
25.3
20.5
20.5
26 / 40
35.1
35.1
27.4
27.4
29.8
29.8
24.9
24.9
22 / 50
31.0
31.0
22.1
22.1
24.9
24.9
19.0
19.0
24 / 45
36.5
36.5
27.5
27.5
30.4
30.4
24.6
24.6
26 / 40
42.0
42.0
32.8
32.8
35.7
35.7
29.8
29.8
22 / 50
36.6
36.6
26.0
26.0
29.3
29.3
22.5
22.5
24 / 45
43.1
43.1
32.5
32.5
35.8
35.8
29.0
29.0
26 / 40
49.6
49.6
38.7
38.7
42.1
42.1
35.2
35.2
22 / 50
42.8
42.8
30.5
30.5
34.4
34.4
26.3
26.3
24 / 45
50.5
50.5
38.0
38.0
41.9
41.9
33.9
33.9
26 / 40
58.1
58.1
45.3
45.3
49.2
49.2
41.2
41.2
22 / 50
46.3
46.3
33.0
33.0
37.2
37.2
28.5
28.5
24 / 45
54.7
54.7
41.2
41.2
45.4
45.4
36.7
36.7
26 / 40
62.9
62.9
49.1
49.1
53.4
53.4
44.6
44.6
22 / 50
51.7
51.7
36.8
36.8
41.5
41.5
31.8
31.8
24 / 45
61.0
61.0
45.9
45.9
50.7
50.7
41.0
41.0
26 / 40
70.2
70.2
54.8
54.8
59.5
59.5
49.8
49.8
22 / 50
59.3
59.3
42.2
42.2
47.6
47.6
36.5
36.5
24 / 45
70.1
70.1
52.7
52.7
58.1
58.1
47.0
47.0
26 / 40
80.7
80.7
62.9
62.9
68.3
68.3
57.1
57.1
SmartCool 6 - 200kW
SR09D020-C0C0-0
SR09D025-C0C0-0
SR12D035-C0C0-0
SR15D045-C0C0-0
SR18D050-C0C0-0
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26.7
30.5
30.5
24.5
24.5
17.1
17.1
13.6
13.6
35 / 23.9
33.7
33.7
27.5
27.5
20.0
20.0
16.5
16.5
37 / 21.4
36.7
36.7
30.5
30.5
22.8
22.8
19.3
19.3
33 / 26.7
36.9
36.9
29.5
29.5
20.5
20.5
16.3
16.3
35 / 23.9
40.7
40.7
33.2
33.2
24.1
24.1
19.9
19.9
37 / 21.4
44.4
44.4
36.8
36.8
27.5
27.5
23.2
23.2
33 / 26.7
44.1
44.1
35.3
35.3
24.6
24.6
19.6
19.6
35 / 23.9
48.7
48.7
39.8
39.8
28.9
28.9
23.8
23.8
37 / 21.4
53.1
53.1
44.0
44.0
32.9
32.9
27.8
27.8
33 / 26.7
52.2
52.2
41.8
41.8
29.0
29.0
23.1
23.1
35 / 23.9
57.7
57.7
47.0
47.0
34.1
34.1
28.1
28.1
37 / 21.4
62.9
62.9
52.1
52.1
38.9
38.9
32.8
32.8
33 / 26.7
61.0
61.0
48.8
48.8
34.0
34.0
27.0
27.0
35 / 23.9
67.4
67.4
55.0
55.0
39.9
39.9
32.9
32.9
37 / 21.4
73.5
73.5
61.0
61.0
45.5
45.5
38.4
38.4
33 / 26.7
66.2
66.2
52.9
52.9
36.8
36.8
29.2
29.2
35 / 23.9
73.1
73.1
59.6
59.6
43.2
43.2
35.6
35.6
37 / 21.4
79.8
79.8
66.1
66.1
49.3
49.3
41.6
41.6
33 / 26.7
73.8
73.8
59.0
59.0
41.1
41.1
32.7
32.7
35 / 23.9
81.5
81.5
66.5
66.5
48.2
48.2
39.7
39.7
37 / 21.4
88.8
88.8
73.7
73.7
55.0
55.0
46.4
46.4
33 / 26.7
84.9
84.9
67.9
67.9
47.1
47.1
37.4
37.4
35 / 23.9
93.8
93.8
76.5
76.5
55.3
55.3
45.6
45.6
37 / 21.4
102.4
102.4
84.8
84.8
63.2
63.2
53.3
53.3
C0C0
SR18D060-C0C0-0
18 / 24 C
SR
SR15D040-C0C0-0
15 / 20 C
Technical
SR12D030-C0C0-0
12 / 17 C
107
SmartCool 6 - 200kW
SR09D020-C0C0
Mechanical Data
SR09D020-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
108
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR09D020-C0C0-2
25.3
0.81
25.3
25.3
0.81
0.81
963 x 890 x 1980
320 / 351
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
16
16
16
1.2
1.2
1.2
18.7
18.7
18.7
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 1.96
1 x 1.96
1 x 1.96
1178 / 1560
1178 / 1560
1178 / 1560
459
459
459
1.85
1.85
1.85
mm
mm
35
22
kW
9
7.5
kg/hr
l/m
SR09D020-C0C0-1
3
7
35
22
Disposable to BS EN 779-G4
9
6.8
35
22
9
7.5
3
3
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
1 x 3.6
1524 / 2260
1006
4
1.7
(4) kW
rpm
Pa
1 x 3.6
1524 / 2260
1006
1 x 3.6
1523 / 2260
1014
SmartCool 6 - 200kW
SR09D020-C0C0
Electrical Data
Unit Data - Full Function
SR09D020-C0C0-0
SR09D020-C0C0-1
SR09D020-C0C0-2
(1)
21
20.6
38.7
25
25
50
7.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 1.96
1 x 1.96
1 x 1.96
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.8
7.5
10.9
10.3
19.7
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
1 x 3.6
1 x 3.6
1 x 3.6
5.8
5.8
11
SR
Capacity
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
109
SmartCool 6 - 200kW
SR09D025-C0C0
Mechanical Data
SR09D025-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
110
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR09D025-C0C0-2
30.5
1.47
30.5
30.5
1.47
1.47
963 x 890 x 1980
320 / 351
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
16
16
16
1.45
1.45
1.45
26.6
26.6
26.6
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 1.96
1 x 1.96
1 x 1.96
1444 / 1560
1444 / 1560
1444 / 1560
197
197
197
2.30
2.30
2.30
mm
mm
35
22
kW
9
7.5
kg/hr
l/m
SR09D025-C0C0-1
3
7
35
22
Disposable to BS EN 779-G4
9
6.8
35
22
9
7.5
3
3
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
1 x 3.6
1866 / 2260
673
4
1.7
(4) kW
rpm
Pa
1 x 3.6
1866 / 2260
673
1 x 3.6
1936 / 2260
543
SmartCool 6 - 200kW
SR09D025-C0C0
Electrical Data
Unit Data - Full Function
SR09D025-C0C0-0
SR09D025-C0C0-1
SR09D025-C0C0-2
(1)
21
20.6
38.7
25
25
50
7.9
10
10
10
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 1.96
1 x 1.96
1 x 1.96
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.8
7.5
10.9
10.3
19.7
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
1 x 3.6
1 x 3.6
1 x 3.6
5.8
5.8
11
SR
Capacity
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
C000
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
111
SmartCool 6 - 200kW
SR12D030-C0C0
Mechanical Data
SR12D030-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
112
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR12D030-C0C0-2
36.5
1.26
36.5
36.5
1.26
1.26
1242 x 890 x 1980
380 / 424
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
22
22
22
1.74
1.74
1.74
21.5
21.5
21.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.9
1 x 2.9
1 x 2.9
1316 / 1660
1316 / 1660
1316 / 1660
504
504
504
2.70
2.70
2.70
mm
mm
42
22
kW
12
7.5
kg/hr
l/m
SR12D030-C0C0-1
3
7
42
22
Disposable to BS EN 779-G4
12
6.8
42
22
12
7.5
3
3
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR12D030-C0C0
Electrical Data
Unit Data - Full Function
SR12D030-C0C0-0
SR12D030-C0C0-1
SR12D030-C0C0-2
(1)
19.6
19.2
35.2
25
25
50
5.43
5.43
9.5
10
10
16
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.9
1 x 2.9
1 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.8
7.5
10.9
10.3
19.7
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
113
SmartCool 6 - 200kW
SR12D035-C0C0
Mechanical Data
SR12D035-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
114
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR12D035-C0C0-2
43.1
2.36
43.1
43.1
2.36
2.36
1242 x 890 x 1980
380 / 424
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
22
22
22
2.05
2.05
2.05
29
29
29.0
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
1 x 2.9
1 x 2.9
1 x 2.9
1595 / 1660
1595 / 1660
1595 / 1660
124
124
124
3.30
3.30
3.30
mm
mm
42
22
kW
12
7.5
kg/hr
l/m
SR12D035-C0C0-1
3
7
42
22
Disposable to BS EN 779-G4
12
6.8
42
22
12
7.5
3
3
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR12D035-C0C0
Electrical Data
Unit Data - Full Function
SR12D035-C0C0-0
SR12D035-C0C0-1
SR12D035-C0C0-2
(1)
19.6
19.2
35.2
25
25
50
5.43
5.43
9.5
10
10
16
mm
16
16
35
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
1 x 2.9
1 x 2.9
1 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
7.5
6.8
7.5
10.9
10.3
19.7
Technical
Humidifier
kg/hr
Rating
kW
2.25
2.25
2.25
3.3
3.5
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
115
SmartCool 6 - 200kW
SR15D040-C0C0
Mechanical Data
SR15D040-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
116
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR15D040-C0C0-2
50.5
2.15
50.5
50.5
2.15
2.15
1521 x 890 x 1980
464 / 518
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
27
27
27
2.4
2.4
2.4
30.5
30.5
30.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 1.96
2 x 1.96
2 x 1.96
1281 / 1560
1281 / 1560
1281 / 1560
349
349
349
3.80
3.80
3.80
mm
mm
42
22
kW
15
15.0
kg/hr
l/m
SR15D040-C0C0-1
8
7
42
22
Disposable to BS EN 779-G4
15
13.5
42
22
15
15.0
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
2 x 3.6
1636 / 2260
898
4
1.7
(4) kW
rpm
Pa
2 x 3.6
1636 / 2260
898
2 x 3.6
1705 / 2260
849
SmartCool 6 - 200kW
SR15D040-C0C0
Electrical Data
Unit Data - Full Function
SR15D040-C0C0-0
SR15D040-C0C0-1
SR15D040-C0C0-2
(1)
43
42.4
79.2
50
50
100
13.8
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 1.96
2 x 1.96
2 x 1.96
5.9
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
2 x 3.6
2 x 3.6
2 x 3.6
5.8
5.8
11
SR
Capacity
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
117
SmartCool 6 - 200kW
SR15D045-C0C0
Mechanical Data
SR15D045-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
118
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR15D045-C0C0-2
54.7
2.82
54.7
54.7
2.82
2.82
1521 x 890 x 1980
464 / 518
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
27
27
27
2.60
2.60
2.60
35.3
35.3
35.3
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 1.96
2 x 1.96
2 x 1.96
1404 / 1560
1404 / 1560
1404 / 1560
221
221
221
4.20
4.20
4.20
mm
mm
42
22
kW
15
15.0
kg/hr
l/m
SR15D045-C0C0-1
8
7
42
22
Disposable to BS EN 779-G4
15
13.5
42
22
15
15.0
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
Backwards Curved, Centrifugal Direct Drive
2 x 3.6
1796 / 2260
747
4
1.7
(4) kW
rpm
Pa
2 x 3.6
1796 / 2260
747
2 x 3.6
1869 / 2260
655
SmartCool 6 - 200kW
SR15D045-C0C0
Electrical Data
Unit Data - Full Function
SR15D045-C0C0-0
SR15D045-C0C0-1
SR15D045-C0C0-2
(1)
43
42.4
79.2
50
50
100
13.8
10
10
16
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 1.96
2 x 1.96
2 x 1.96
5.9
(2)
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
kW
8.7
9.2
15.8
2 x 3.6
2 x 3.6
2 x 3.6
5.8
5.8
11
SR
Capacity
Rating
First upgrade EC Motor - Per Fan
Quantity x Motor Size
kW
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
119
SmartCool 6 - 200kW
SR18D050-C0C0
Mechanical Data
SR18D050-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
120
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR18D050-C0C0-2
61.0
2.25
61.0
61.0
2.25
2.25
1800 x 890 x 1980
540 / 609
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
35
35
35
2.9
2.9
2.9
26.2
26.2
26.2
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1231 / 1660
1231 / 1660
1231 / 1660
551
551
551
4.60
4.60
4.60
mm
mm
54
22
kW
18
15.0
kg/hr
l/m
SR18D050-C0C0-1
8
7
54
22
Disposable to BS EN 779-G4
18
13.5
54
22
18
15.0
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR18D050-C0C0
Electrical Data
Unit Data - Full Function
SR18D050-C0C0-0
SR18D050-C0C0-1
SR18D050-C0C0-2
(1)
40.3
39.7
72.2
50
50
100
9.86
9.86
17
16
16
20
mm
Mains Supply
35
35
70
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
121
SmartCool 6 - 200kW
SR18D060-C0C0
Mechanical Data
SR18D060-C0C0-0
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine / Operating
Construction
(1) kW
(2) kW
mm
(3) kg
C0C0
SR
Technical
Material / Colour
122
Cooling Coil
Cooling / Dehum Stages
Water volume
Water flow rate
Pressure drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain pump flow rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SR18D060-C0C0-2
70.1
3.86
70.1
70.1
3.86
3.86
1800 x 890 x 1980
540 / 609
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Frame: Anodised Aluminium Frame with Aluminium Corners, Epoxy
Baked Powder Coated Paint - Black Grey (RAL 7021)
Copper Tube / Hydrophilic Coated Aluminium Fins
1 (Modulated) / 1
35
35
35
3.34
3.34
3.34
33.1
33.1
33.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1460 / 1660
1460 / 1660
1460 / 1660
318
318
318
5.50
5.50
5.50
mm
mm
54
22
kW
18
15.0
kg/hr
l/m
SR18D060-C0C0-1
8
7
54
22
Disposable to BS EN 779-G4
18
13.5
54
22
18
15.0
8
8
7
7
3/4 BSPF Braided Flexible Hose / 19mm Hose Connection
m
l/m
5
10.8
5
10.8
10mm Stainless Steel Stub Connection
5
10.8
m
l/m
4
1.7
4
1.7
10mm Quarter Turn Plastic Barb Connection
4
1.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SR18D060-C0C0
Electrical Data
Unit Data - Full Function
SR18D060-C0C0-0
SR18D060-C0C0-1
SR18D060-C0C0-2
(1)
40.3
39.7
72.2
50
50
100
9.86
9.86
17
16
16
20
mm
Mains Supply
35
35
70
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2)
OPTIONAL EXTRAS
Electric Heating
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
8
Technical
Humidifier
kg/hr
Rating
kW
8.7
9.2
15.8
SR
Capacity
kW
N/A
N/A
N/A
N/A
N/A
N/A
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
123
SmartCool 6 - 200kW
90.0
80.0
70.0
10
11
Technical
60.0
50.0
40.0
30.0
20.0
10.0
0.0
1.00
2.00
3.00
Flow Rate (l/s)
4.00
5.00
6.00
SR
0.00
C0C0
8
9
10
11
P valve =
SR09 C0C0
124
Valve Kv
16.0
0.44
SR12 C0C0
25.0
0.69
SR15 C0C0
25.0
0.69
SR18 C0C0
40.0
1.11
SmartCool 6 - 200kW
Sound Measurement
Discharge Air
SR09D020-C0C0
SR09D025-C0C0
SR12D035-C0C0
SR15D045-C0C0
SR18D050-C0C0
250
500
1000
2000
4000
8000
74
73
71
72
73
71
65
56
26
Return Air
73
73
71
71
72
69
64
55
25
Case Breakout
75
77
77
74
72
71
64
56
29
Sound Pressure @ 3m
60
62
62
60
58
56
50
42
14
Discharge Air
80
78
77
78
78
76
70
61
31
Return Air
79
78
77
76
77
74
69
60
31
Case Breakout
80
82
82
80
78
76
70
62
34
Sound Pressure @ 3m
66
67
67
65
63
62
55
47
20
Discharge Air
77
73
76
75
74
73
67
61
37
Return Air
75
73
76
73
73
71
66
60
36
Case Breakout
77
76
81
77
74
73
66
61
40
Sound Pressure @ 3m
62
62
67
62
59
59
52
47
26
Discharge Air
82
78
81
81
79
79
73
67
43
Return Air
81
78
81
79
78
77
72
66
42
Case Breakout
82
82
87
82
79
79
72
67
46
Sound Pressure @ 3m
68
68
72
68
64
64
58
53
31
Discharge Air
80
78
76
78
78
76
70
61
31
Return Air
78
78
76
76
77
74
69
60
30
Case Breakout
80
82
82
79
77
76
70
61
34
Sound Pressure @ 3m
65
67
67
65
63
61
55
47
20
Discharge Air
82
80
79
80
80
78
72
63
34
Return Air
81
80
79
78
79
77
72
63
33
Case Breakout
82
84
84
82
80
78
72
64
37
Sound Pressure @ 3m
68
70
70
67
65
64
58
49
22
Discharge Air
78
74
77
76
76
74
68
62
38
Return Air
76
74
77
75
74
72
67
61
38
Case Breakout
78
78
82
78
75
74
68
63
41
Sound Pressure @ 3m
64
63
68
64
60
60
53
48
27
Discharge Air
82
79
82
81
80
79
73
67
43
Return Air
81
79
82
79
79
77
72
66
42
Case Breakout
83
82
87
83
79
79
72
67
46
Sound Pressure @ 3m
68
68
72
68
65
64
58
53
32
C0C0
SR18D060-C0C0
125
SR
SR15D040-C0C0
63
Technical
SR12D030-C0C0
Frequency (Hz) dB
Overall
dB(A)
125
SmartCool 6 - 200kW
C0C0
SR
Technical
Interconnecting Wiring
N1
Neutral (Supply 1)
301
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
CONN17
WIRE
1
2
3
4
502
583 or 584
2
N or 3
PIN 1
Conn 17
CONN14
Conn 14
PIN No.
WIRE
1
2
3
4
5
6
7
502
522
560
561
563
564
565
PIN 1
Conn 16
CONN16
PIN No.
WIRE
1
2
3
4
5
6
7
8
2
N or 3
534
535
609
610
810
811
PIN 1
Conn 14
CONN15
Conn 15
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
126
PIN No.
PIN 1
PIN No.
WIRE
1
2
3
881
882
883
SmartCool 6 - 200kW
Intentionally Blank
Technical
SR
C0C0
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
127
SmartCool 6 - 200kW
SD18D110-CH00-0
Technical
SD22D140-CH00-0
SD25D175-CH00-0
SD35D255-CH00-0
7 / 12 C
8 / 14 C
128
10 / 16 C
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
117.0
93.8
89.6
81.5
68.6
68.6
54.0
54.0
24 / 45
132.4
106.7
105.3
94.6
82.9
82.9
69.2
69.2
26 / 40
145.4
119.6
118.6
107.7
96.5
96.5
83.2
83.2
22 / 50
145.9
113.5
114.2
99.0
85.6
85.6
69.0
69.0
24 / 45
163.8
128.6
132.4
114.3
104.9
98.8
86.0
86.0
26 / 40
179.2
143.8
147.9
129.6
120.8
113.8
102.1
102.1
22 / 50
192.3
149.1
151.4
130.3
116.7
111.2
92.2
92.2
24 / 45
215.4
168.9
174.7
150.2
139.3
128.9
113.9
113.9
26 / 40
235.3
188.6
194.8
170.1
159.8
148.6
134.6
134.6
22 / 50
239.9
190.2
185.8
165.7
141.5
141.5
113.2
113.2
24 / 45
270.2
216.0
216.5
191.9
169.3
169.3
142.2
142.2
26 / 40
296.1
241.8
242.9
217.9
196.1
196.1
169.8
169.8
22 / 50
281.6
220.7
220.2
192.6
166.2
166.2
134.2
134.2
24 / 45
316.2
250.3
255.2
222.5
202.8
193.8
167.0
167.0
26 / 40
346.0
279.8
285.2
252.2
233.6
223.4
198.1
198.1
CH00
SD
SD31D215-CH00-0
5 / 10 C
Temp. (C)
SmartCool 6 - 200kW
SD18D110-CH00-0
SD22D140-CH00-0
SD31D215-CH00-0
17 / 22 C
18 / 24C
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26
99.5
99.5
86.8
86.8
76.6
76.6
63.3
63.3
35 / 24
111.3
111.3
98.9
98.9
89.2
89.2
76.3
76.3
37 / 22
123.1
123.1
110.8
110.8
101.5
101.5
88.9
88.9
33 / 26
119.8
119.8
104.8
104.8
93.6
93.6
77.9
77.9
35 / 24
133.6
133.6
118.9
118.9
108.1
108.1
93.0
93.0
37 / 22
147.4
147.4
132.9
132.9
122.5
122.5
107.7
107.7
33 / 26
157.2
157.2
137.5
137.5
123.1
123.1
102.8
102.8
35 / 24
175.1
175.1
155.8
155.8
142.0
142.0
122.3
122.3
37 / 22
193.1
193.1
174.1
174.1
160.6
160.6
141.4
141.4
33 / 26
200.8
200.8
175.5
175.5
155.8
155.8
129.3
129.3
35 / 24
224.4
224.4
199.4
199.4
180.6
180.6
155.0
155.0
37 / 22
247.9
247.9
223.2
223.2
205.1
205.1
179.9
179.9
33 / 26
232.6
232.6
203.5
203.5
181.5
181.5
151.1
151.1
35 / 24
259.3
259.3
230.8
230.8
209.6
209.6
180.4
180.4
37 / 22
286.3
286.3
258.1
258.1
237.6
237.6
208.9
208.9
SD
SD35D255-CH00-0
15 / 20 C
Technical
SD25D175-CH00-0
Air On
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
129
SmartCool 6 - 200kW
Technical Data SD CH00 Units
Mechanical Data
CH00
SD
Technical
SD18D110-CH00-0
130
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD18D110-CH00-2
105.3
105.3
105.3
2.6
2.6
2.6
1800 x 890 x 1980
1800 x 890 x 1980
1800 x 890 x 1980
463 / 175 / 699
463 / 175 / 699
463 / 175 / 699
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
62
62
62
5.0
5.0
5.0
35.7
35.7
35.7
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1334 / 1657
1334 / 1657
1334 / 1657
485
485
485
5.7
5.7
5.7
mm
mm
54
22
kW
6
15.0
kg/hr
l/m
SD18D110-CH00-1
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
8
8
8
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD18D110-CH00
Electrical Data
Unit Data - Full Function
SD18D110-CH00-0
SD18D110-CH00-1
SD18D110-CH00-2
(1)
40.3
39.7
72.2
50
50
100
17.0
9.9
9.9
16
16
20
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
EC
kW
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
(2)
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
kW
6.0
6.0
6.0
8.7
9.2
15.8
SD
Capacity
Rating
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
131
SmartCool 6 - 200kW
Technical Data SD CH00 Units
Mechanical Data
CH00
SD
Technical
SD22D140-CH00-0
132
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD22D140-CH00-1
SD22D140-CH00-2
132.4
132.4
132.4
3.5
3.5
3.5
2200 x 890 x 1980
2200 x 890 x 1980
2200 x 890 x 1980
525 / 189 / 787
525 / 189 / 787
525 / 189 / 787
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
73
73
73
6.3
6.3
6.3
55.6
55.6
55.6
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1503 / 1657
1503 / 1657
1503 / 1657
266
266
266
6.7
6.7
6.7
mm
mm
54
22
kW
6
15.0
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD22D140-CH00
Electrical Data
Unit Data - Full Function
SD22D140-CH00-0
SD22D140-CH00-1
SD22D140-CH00-2
(1)
64.2
64.7
115.6
80
80
160
17.0
9.9
9.9
16
16
20
mm
70
70
70
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
30
30
30
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
Rating
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
133
SmartCool 6 - 200kW
Technical Data SD CH00 Units
Mechanical Data
CH00
SD
Technical
SD25D175-CH00-0
134
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD25D175-CH00-1
SD25D175-CH00-2
174.7
174.7
174.7
4.7
4.7
4.7
2500 x 890 x 1980
2500 x 890 x 1980
2500 x 890 x 1980
588 / 244 / 919
588 / 244 / 919
588 / 244 / 919
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
88
88
88
8.3
8.3
8.3
77.2
77.2
77.2
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
1409 / 1657
1409 / 1657
1409 / 1657
392
392
392
8.8
8.8
8.8
mm
mm
67
22
kW
6
22.5
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
20.3
67
22
6
22.5
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD25D175-CH00
Electrical Data
Unit Data - Full Function
SD25D175-CH00-0
SD25D175-CH00-1
SD25D175-CH00-2
(1)
79.4
79.4
142.8
100
100
200
14.3
14.3
24.5
20
20
32
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
22.5
20.3
22.5
32.5
30.9
59.1
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
135
SmartCool 6 - 200kW
Technical Data SD CH00 Units
Mechanical Data
CH00
SD
Technical
SD31D215-CH00-0
136
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD31D215-CH00-1
SD31D215-CH00-2
216.5
216.5
216.5
5.9
5.9
5.9
3100 x 890 x 1980
3100 x 890 x 1980
3100 x 890 x 1980
690 / 305 / 1101
690 / 305 / 1101
690 / 305 / 1101
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
107
107
107
10.3
10.3
10.3
76.3
76.3
76.3
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1374 / 1657
1374 / 1657
1374 / 1657
428
428
428
11.3
11.3
11.3
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD31D215-CH00
Electrical Data
Unit Data - Full Function
SD31D215-CH00-0
SD31D215-CH00-1
SD31D215-CH00-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
137
SmartCool 6 - 200kW
Technical Data SD CH00 Units
Mechanical Data
CH00
SD
Technical
SD35D255-CH00-0
138
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD35D255-CH00-1
SD35D255-CH00-2
255.2
255.2
255.2
7.8
7.8
7.8
3500 x 890 x 1980
3500 x 890 x 1980
3500 x 890 x 1980
745 / 326 / 1190
745 / 326 / 1190
745 / 326 / 1190
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
120
120
120
12.1
12.1
12.1
106.5
106.5
106.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1532 / 1657
1532 / 1657
1532 / 1657
225
225
225
13.0
13.0
13.0
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD35D255-CH00
Electrical Data
Unit Data - Full Function
SD35D255-CH00-0
SD35D255-CH00-1
SD35D255-CH00-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CH00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
139
SmartCool 6 - 200kW
200.0
180.0
160.0
Technical
140.0
1 and 2
120.0
100.0
80.0
60.0
40.0
SD
20.0
0.0
0.00
2.00
4.00
SD18D110-CH00-0
1
2
3
6.00
Flow Rate (l/s)
SD22D140-CH00-0
8.00
SD25D175-CH00-0
SD18D110 - CH00 - 0
SD22D140 - CH00 - 0
SD25D175 - CH00 - 0
CH00
Q
M
140
Kv Cooling
Kv Bypass
SD18D110-CH00
40
40
SD22D140-CH00
63
40
SD25D175-CH00
63
40
10.00
12.00
SmartCool 6 - 200kW
180.0
160.0
140.0
4
5
100.0
Technical
120.0
80.0
60.0
40.0
20.0
SD
0.0
0.00
2.00
4.00
6.00
8.00
10.00
12.00
14.00
16.00
4
5
SD31D215 - CH00 - 0
SD35D225 - CH00 - 0
P valve =
Q
M
CH00
Kv Cooling
Kv Bypass
SD31D215-CH00
63
63
SD35D255-CH00
63
63
141
SmartCool 6 - 200kW
SD18D110-CH00-0
SD
Technical
SD22D140-CH00-0
SD25D175-CH00-0
SD31D215-CH00-0
SD35D225-CH00-0
Frequency (Hz) dB
Overall
dB(A)
63
125
250
500
1000
2000
4000
8000
Discharge Air
63.0
66.1
77.1
63.9
56.1
49.9
47.3
39.9
32.2
Return Air
58.3
64.3
71.3
59.2
52.7
46.8
47.1
39.6
32.1
Case Breakout
64.3
71.6
76.3
66.7
60.4
54.0
50.5
46.5
37.9
Sound Pressure @ 3m
49.8
57.1
61.8
52.1
45.8
39.4
36.0
31.9
23.3
Sound Measurement
Discharge Air
66.0
69.2
80.1
66.9
58.9
53.1
50.7
43.4
35.6
Return Air
61.3
67.5
74.4
62.2
55.5
49.9
50.5
43.1
35.4
Case Breakout
67.3
74.8
79.4
69.7
63.2
57.2
53.9
50.0
41.2
Sound Pressure @ 3m
52.8
60.2
64.8
55.1
48.6
42.6
39.4
35.4
26.6
Discharge Air
66.0
69.2
80.1
66.9
59.1
53.0
50.5
43.1
35.4
Return Air
61.3
67.4
74.4
62.3
55.7
49.9
50.3
42.8
35.2
Case Breakout
67.4
74.7
79.4
69.7
63.4
57.1
53.7
49.7
41.0
Sound Pressure @ 3m
52.8
60.2
64.9
55.2
48.8
42.5
39.2
35.1
26.5
Discharge Air
66.7
69.8
80.8
67.6
59.8
53.6
51.1
43.7
36.0
Return Air
62.0
68.0
75.0
62.9
56.3
50.5
50.9
43.4
35.8
Case Breakout
68.0
75.3
80.0
70.4
64.0
57.7
54.3
50.2
41.6
Sound Pressure @ 3m
53.5
60.8
65.5
55.8
49.5
43.2
39.7
35.7
27.0
Discharge Air
69.6
72.8
83.7
70.4
62.4
56.7
54.4
47.1
39.2
Return Air
64.9
71.1
77.9
65.8
59.0
53.6
54.2
46.8
39.1
Case Breakout
70.9
78.4
82.9
73.2
66.7
60.8
57.6
53.7
44.8
Sound Pressure @ 3m
56.4
63.8
68.4
58.7
52.1
46.3
43.1
39.1
30.3
CH00
142
SmartCool 6 - 200kW
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
CH00
SD
301
Technical
N1
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
143
SmartCool 6 - 200kW
SD18D115-CL00-0
Technical
SD22D145-CL00-0
SD25D180-CL00-0
SD
SD31D235-CL00-0
7 / 12 C
8 / 14 C
144
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
124.1
96.5
97.5
84.2
74.8
72.3
59.3
59.3
24 / 45
139.2
109.3
112.7
97.2
89.7
83.7
73.4
73.4
26 / 40
152.1
122.1
125.8
110.1
103.0
96.4
86.9
86.9
22 / 50
152.0
115.9
120.9
101.3
97.2
90.4
73.0
73.0
24 / 45
169.8
130.9
138.7
116.5
115.7
106.1
89.4
89.4
26 / 40
184.9
145.9
154.1
131.6
131.5
121.5
105.2
105.2
22 / 50
199.1
151.8
158.7
132.8
128.6
118.8
96.2
96.2
24 / 45
222.1
171.4
181.8
152.7
152.4
139.2
117.5
117.5
26 / 40
241.9
191.1
201.7
172.5
172.9
159.4
137.9
137.9
22 / 50
256.3
196.6
203.8
171.9
164.0
153.5
123.8
123.8
24 / 45
286.3
222.1
233.9
197.7
195.1
180.0
151.4
151.4
26 / 40
312.1
247.7
259.8
223.5
221.7
206.3
177.9
177.9
22 / 50
297.7
227.0
237.7
198.7
193.2
177.9
144.1
144.1
24 / 45
332.2
256.4
272.1
228.3
228.7
208.3
175.7
175.7
26 / 40
361.6
285.6
301.7
257.8
259.0
238.4
206.1
206.1
CL00
SD35D270-CL00-0
5 / 10 C
SmartCool 6 - 200kW
SD18D115-CL00-0
SD22D145-CL00-0
SD31D235-CL00-0
17 / 22 C
18 / 24C
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26
101.7
101.7
89.0
89.0
79.6
79.6
66.4
66.4
35 / 24
113.3
113.3
100.8
100.8
91.8
91.8
79.0
79.0
37 / 22
125.0
125.0
112.7
112.7
103.9
103.9
91.5
91.5
33 / 26
121.7
121.7
106.8
106.8
96.1
96.1
80.6
80.6
35 / 24
135.4
135.4
120.6
120.6
110.4
110.4
95.4
95.4
37 / 22
149.1
149.1
134.5
134.5
124.6
124.6
109.8
109.8
33 / 26
159.2
159.2
139.7
139.7
125.9
125.9
105.7
105.7
35 / 24
177.1
177.1
157.8
157.8
144.6
144.6
124.9
124.9
37 / 22
195.1
195.1
176.1
176.1
163.1
163.1
143.8
143.8
33 / 26
206.1
206.1
180.7
180.7
162.6
162.6
136.4
136.4
35 / 24
229.2
229.2
204.2
204.2
186.8
186.8
161.4
161.4
37 / 22
252.6
252.6
227.9
227.9
210.9
210.9
185.8
185.8
33 / 26
237.6
237.6
208.5
208.5
188.1
188.1
158.0
158.0
35 / 24
264.3
264.3
235.6
235.6
215.9
215.9
186.6
186.6
37 / 22
291.2
291.2
262.8
262.8
243.5
243.5
214.8
214.8
SD
SD35D270-CL00-0
15 / 20 C
Technical
SD25D180-CL00-0
Air On
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
145
SmartCool 6 - 200kW
Technical Data SD CL00 Units
Mechanical Data
CL00
SD
Technical
SD18D115-CL00-0
146
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD18D115-CL00-2
91.6
91.6
91.6
2.6
2.6
2.6
1800 x 890 x 1980
1800 x 890 x 1980
1800 x 890 x 1980
463 / 175 / 699
463 / 175 / 699
463 / 175 / 699
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
62
62
62
3.6
3.6
3.6
25.9
25.9
25.9
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1334 / 1657
1334 / 1657
1334 / 1657
485
485
485
5.7
5.7
5.7
mm
mm
54
22
kW
6
15.0
kg/hr
l/m
SD18D115-CL00-1
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
8
8
8
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD18D115-CL00
Electrical Data
Unit Data - Full Function
SD18D115-CL00-0
SD18D115-CL00-1
SD18D115-CL00-2
(1)
40.3
39.7
72.2
50
50
100
9.9
9.9
17.0
16
16
20
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2) kW
A
OPTIONAL EXTRAS
Electric Heating
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
EC
2 x 2.9
Humidifier
kg/hr
kW
6.0
6.0
6.0
8.7
9.2
15.8
SD
Capacity
Rating
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
147
SmartCool 6 - 200kW
Technical Data SD CL00 Units
Mechanical Data
CL00
SD
Technical
SD22D145-CL00-0
148
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD22D145-CL00-1
SD22D145-CL00-2
110.2
110.2
110.2
3.5
3.5
3.5
2200 x 890 x 1980
2200 x 890 x 1980
2200 x 890 x 1980
525 / 189 / 787
525 / 189 / 787
525 / 189 / 787
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
73
73
73
4.4
4.4
4.4
39.5
39.5
39.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1503 / 1657
1503 / 1657
1503 / 1657
266
266
266
6.7
6.7
6.7
mm
mm
54
22
kW
6
15.0
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD22D145-CL00
Electrical Data
Unit Data - Full Function
SD22D145-CL00-0
SD22D145-CL00-1
SD22D145-CL00-2
(1)
64.2
64.7
115.6
80
80
160
9.9
9.9
17.0
16
16
20
mm
70
70
70
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
149
SmartCool 6 - 200kW
Technical Data SD CL00 Units
Mechanical Data
CL00
SD
Technical
SD25D180-CL00-0
150
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD25D180-CL00-1
SD25D180-CL00-2
144.3
144.3
144.3
4.7
4.7
4.7
2500 x 890 x 1980
2500 x 890 x 1980
2500 x 890 x 1980
588 / 244 / 919
588 / 244 / 919
588 / 244 / 919
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
88
88
88
5.7
5.7
5.7
62.4
62.4
62.4
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
1409 / 1657
1409 / 1657
1409 / 1657
392
392
392
8.8
8.8
8.8
mm
mm
67
22
kW
6
22.5
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
20.3
67
22
6
22.5
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD25D180-CL00
Electrical Data
Unit Data - Full Function
SD25D180-CL00-0
SD25D180-CL00-1
SD25D180-CL00-2
(1)
79.4
79.4
142.8
100
100
200
14.3
14.3
24.5
20
20
32
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
22.5
20.3
22.5
32.5
30.9
59.1
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
151
SmartCool 6 - 200kW
Technical Data SD CL00 Units
Mechanical Data
CL00
SD
Technical
SD31D235-CL00-0
152
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD31D235-CL00-1
SD31D235-CL00-2
186.4
186.4
186.4
5.9
5.9
5.9
3100 x 890 x 1980
3100 x 890 x 1980
3100 x 890 x 1980
690 / 305 / 1101
690 / 305 / 1101
690 / 305 / 1101
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
107
107
107
7.4
7.4
7.4
67.1
67.1
67.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1374 / 1657
1374 / 1657
1374 / 1657
428
428
428
11.3
11.3
11.3
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD31D235-CL00
Electrical Data
Unit Data - Full Function
SD31D235-CL00-0
SD31D235-CL00-1
SD31D235-CL00-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
153
SmartCool 6 - 200kW
Technical Data SD CL00 Units
Mechanical Data
CL00
SD
Technical
SD35D270-CL00-0
154
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD35D270-CL00-1
SD35D270-CL00-2
215.4
215.4
215.4
7.8
7.8
7.8
3500 x 890 x 1980
3500 x 890 x 1980
3500 x 890 x 1980
745 / 326 / 1190
745 / 326 / 1190
745 / 326 / 1190
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
120
120
120
8.6
8.6
8.6
95.1
95.1
95.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1532 / 1657
1532 / 1657
1532 / 1657
225
225
225
13.0
13.0
13.0
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD35D270-CL00
Electrical Data
Unit Data - Full Function
SD35D270-CL00-0
SD35D270-CL00-1
SD35D270-CL00-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CL00
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
155
SmartCool 6 - 200kW
240.0
220.0
Technical
200.0
180.0
1 and 3
160.0
140.0
120.0
100.0
80.0
60.0
40.0
20.0
SD
0.0
0.00
2.00
4.00
SD18D115-CL00-0
1
2
3
6.00
Flow Rate (l/s)
SD22D145-CL00-0
8.00
SD25D180-CL00-0
SD18D115 -CL00-0
SD22D145-CL00-0
SD25D180-CL00-0
CL00
Q
M
where
P = Pressure Drop in kPa,
Kv
156
Kv Cooling
Kv Bypass
SD18D115-CL00
40
40
SD22D145-CL00
63
40
SD25D180-CL00
63
40
10.00
12.00
SmartCool 6 - 200kW
300.00
250.00
5
4
150.00
Technical
200.00
100.00
50.00
0.00
2.00
4.00
6.00
8.00
10.00
12.00
14.00
16.00
SD
0.00
Flow Rate (l/s)
SD31D235-CL00-0
SD35D270-CL00-0
4
5
SD31D235-CL00-0
SD35D270-CL00-0
CL00
P valve =
Kv Cooling
Kv Bypass
SD31D235-CL00
63
63
SD35D270-CL00
63
63
157
SmartCool 6 - 200kW
SD18D115-CL00-0
SD
Technical
SD22D145-CL00-0
SD25D180-CL00-0
SD31D235-CL00-0
SD35D270-CL00-0
Frequency (Hz) dB
Overall
dB(A)
63
125
250
500
1000
2000
4000
8000
Discharge Air
63.0
66.1
77.1
63.9
56.1
49.9
47.3
39.9
32.2
Return Air
58.3
64.3
71.3
59.2
52.7
46.8
47.1
39.6
32.1
Sound Measurement
Case Breakout
64.3
71.6
76.3
66.7
60.4
54.0
50.5
46.5
37.9
Sound Pressure @ 3m
49.8
57.1
61.8
52.1
45.8
39.4
36.0
31.9
23.3
Discharge Air
66.0
69.2
80.1
66.9
58.9
53.1
50.7
43.4
35.6
Return Air
61.3
67.5
74.4
62.2
55.5
49.9
50.5
43.1
35.4
Case Breakout
67.3
74.8
79.4
69.7
63.2
57.2
53.9
50.0
41.2
Sound Pressure @ 3m
52.8
60.2
64.8
55.1
48.6
42.6
39.4
35.4
26.6
Discharge Air
66.0
69.2
80.1
66.9
59.1
53.0
50.5
43.1
35.4
Return Air
61.3
67.4
74.4
62.3
55.7
49.9
50.3
42.8
35.2
Case Breakout
67.4
74.7
79.4
69.7
63.4
57.1
53.7
49.7
41.0
Sound Pressure @ 3m
52.8
60.2
64.9
55.2
48.8
42.5
39.2
35.1
26.5
Discharge Air
66.7
69.8
80.8
67.6
59.8
53.6
51.1
43.7
36.0
Return Air
62.0
68.0
75.0
62.9
56.3
50.5
50.9
43.4
35.8
Case Breakout
68.0
75.3
80.0
70.4
64.0
57.7
54.3
50.2
41.6
Sound Pressure @ 3m
53.5
60.8
65.5
55.8
49.5
43.2
39.7
35.7
27.0
Discharge Air
69.6
72.8
83.7
70.4
62.4
56.7
54.4
47.1
39.2
Return Air
64.9
71.1
77.9
65.8
59.0
53.6
54.2
46.8
39.1
Case Breakout
70.9
78.4
82.9
73.2
66.7
60.8
57.6
53.7
44.8
Sound Pressure @ 3m
56.4
63.8
68.4
58.7
52.1
46.3
43.1
39.1
30.3
CL00
158
SmartCool 6 - 200kW
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
CL00
SD
301
Technical
N1
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
159
SmartCool 6 - 200kW
SD18D085-CHCH-0
Technical
SD22D105-CHCH-0
SD25D135-CHCH-0
SD
SD31D165-CHCH-0
5 / 10 C
7 / 12 C
8 / 14 C
160
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
83.0
75.5
63.4
63.4
51.4
51.4
37.6
37.6
24 / 45
95.6
86.9
75.2
75.2
64.3
64.3
52.4
52.4
26 / 40
106.2
98.2
86.6
86.6
76.3
76.3
65.0
65.0
22 / 50
114.2
98.4
83.9
83.9
71.1
71.1
55.8
55.8
24 / 45
130.2
112.3
98.3
98.3
86.2
86.2
71.8
71.8
26 / 40
143.8
126.3
112.3
112.3
100.7
100.7
86.6
86.6
22 / 50
147.6
124.3
109.4
105.1
91.6
91.6
73.1
73.1
24 / 45
175.0
151.2
128.4
121.0
110.0
110.0
92.2
92.2
26 / 40
184.1
159.1
145.4
138.9
127.9
127.9
110.4
110.4
22 / 50
171.4
155.9
130.7
130.7
106.3
106.3
78.4
78.4
24 / 45
197.3
179.3
155.0
155.0
132.7
132.7
108.3
108.3
26 / 40
218.9
202.7
178.5
178.5
157.4
157.4
134.1
134.1
22 / 50
207.7
184.4
156.0
156.0
130.3
130.3
100.7
100.7
24 / 45
237.3
211.3
183.6
183.6
159.6
159.6
131.9
131.9
26 / 40
262.6
238.2
210.5
210.5
187.5
187.5
160.7
160.7
CHCH
SD35D195-CHCH-0
Air On
SmartCool 6 - 200kW
SD18D085-CHCH-0
SD22D105-CHCH-0
SD31D165-CHCH-0
17 / 22 C
18 / 24C
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26
81.0
81.0
70.1
70.1
60.3
60.3
48.7
48.7
35 / 24
91.4
91.4
80.7
80.7
71.3
71.3
60.2
60.2
37 / 22
101.7
101.7
91.1
91.1
82.1
82.1
71.3
71.3
33 / 26
104.7
104.7
91.1
91.1
79.7
79.7
65.4
65.4
35 / 24
117.4
117.4
104.0
104.0
93.2
93.2
79.4
79.4
37 / 22
130.3
130.3
117.0
117.0
106.5
106.5
93.0
93.0
33 / 26
131.9
131.9
115.0
115.0
101.2
101.2
83.6
83.6
35 / 24
147.8
147.8
131.0
131.0
117.9
117.9
100.7
100.7
37 / 22
163.8
163.8
147.2
147.2
134.4
134.4
117.5
117.5
33 / 26
167.0
167.0
144.5
144.5
124.4
124.4
100.5
100.5
35 / 24
188.2
188.2
166.2
166.2
147.0
147.0
124.2
124.2
37 / 22
209.5
209.5
187.8
187.8
169.1
169.1
147.0
147.0
33 / 26
196.5
196.5
170.5
170.5
148.1
148.1
121.0
121.0
35 / 24
220.8
220.8
195.4
195.4
173.9
173.9
147.7
147.7
37 / 22
245.3
245.3
220.1
220.1
199.5
199.5
173.7
173.7
SD
SD35D195-CHCH-0
15 / 20 C
Technical
SD25D135-CHCH-0
Air On
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
161
SmartCool 6 - 200kW
Technical Data SD CHCH Units
Mechanical Data
CHCH
SD
Technical
SD18D085-CHCH-0
162
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD18D085-CHCH-2
75.2
75.2
75.2
2.3
2.3
2.3
1800 x 890 x 1980
1800 x 890 x 1980
1800 x 890 x 1980
477 / 175 / 702
477 / 175 / 702
477 / 175 / 702
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
50
50
50
3.6
3.6
3.6
23.0
23.0
23.0
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1266 / 1657
1266 / 1657
1266 / 1657
538
538
538
5.3
5.3
5.3
mm
mm
54
22
kW
6
15.0
kg/hr
l/m
SD18D085-CHCH-1
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
8
8
8
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD18D085-CHCH
Electrical Data
Unit Data - Full Function
SD18D085-CHCH-0
SD18D085-CHCH-1
SD18D085-CHCH-2
(1)
40.3
39.7
72.2
50
50
100
9.9
9.9
17.0
16
16
20
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
kW
6.0
6.0
6.0
8.7
9.2
15.8
SD
Capacity
Rating
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
163
SmartCool 6 - 200kW
Technical Data SD CHCH Units
Mechanical Data
CHCH
SD
Technical
SD22D105-CHCH-0
164
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD22D105-CHCH-1
SD22D105-CHCH-2
98.3
98.3
98.3
3.5
3.5
3.5
2200 x 890 x 1980
2200 x 890 x 1980
2200 x 890 x 1980
547 / 189 / 798
547 / 189 / 798
547 / 189 / 798
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
62
62
62
4.7
4.7
4.7
39.5
39.5
39.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1491 / 1657
1491 / 1657
1491 / 1657
287
287
287
6.5
6.5
6.5
mm
mm
54
22
kW
6
15.0
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD22D105-CHCH
Electrical Data
Unit Data - Full Function
SD22D105-CHCH-0
SD22D105-CHCH-1
SD22D105-CHCH-2
(1)
64.2
64.7
115.6
80
80
160
9.9
9.9
17.0
16
16
20
mm
70
70
70
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
165
SmartCool 6 - 200kW
Technical Data SD CHCH Units
Mechanical Data
CHCH
SD
Technical
SD25D135-CHCH-0
166
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD25D135-CHCH-1
SD25D135-CHCH-2
128.4
128.4
128.4
4.1
4.1
4.1
2500 x 890 x 1980
2500 x 890 x 1980
2500 x 890 x 1980
618 / 244 / 940
618 / 244 / 940
618 / 244 / 940
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
79
79
79
6.1
6.1
6.1
43.5
43.5
43.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
1337 / 1657
1337 / 1657
1337 / 1657
463
463
463
8.2
8.2
8.2
mm
mm
67
22
kW
6
22.5
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
20.3
67
22
6
22.5
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD25D135-CHCH
Electrical Data
Unit Data - Full Function
SD25D135-CHCH-0
SD25D135-CHCH-1
SD25D135-CHCH-2
(1)
79.4
79.4
142.8
100
100
200
14.3
14.3
24.5
20
20
32
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
3 x 2.9
3 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2) kW
A
OPTIONAL EXTRAS
Electric Heating
Rating
kW
22.5
20.3
22.5
32.5
30.9
59.1
Technical
EC
3 x 2.9
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
167
SmartCool 6 - 200kW
Technical Data SD CHCH Units
Mechanical Data
CHCH
SD
Technical
SD31D165-CHCH-0
168
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD31D165-CHCH-1
SD31D165-CHCH-2
155.0
155.0
155.0
5.4
5.4
5.4
3100 x 890 x 1980
3100 x 890 x 1980
3100 x 890 x 1980
727 / 305 / 1127
727 / 305 / 1127
727 / 305 / 1127
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
96
96
96
7.4
7.4
7.4
37.1
37.1
37.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1322 / 1657
1322 / 1657
1322 / 1657
473
473
473
10.7
10.7
10.7
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD31D165-CHCH
Electrical Data
Unit Data - Full Function
SD31D165-CHCH-0
SD31D165-CHCH-1
SD31D165-CHCH-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
169
SmartCool 6 - 200kW
Technical Data SD CHCH Units
Mechanical Data
CHCH
SD
Technical
SD35D195-CHCH-0
170
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD35D195-CHCH-1
SD35D195-CHCH-2
183.6
183.6
183.6
7.2
7.2
7.2
3500 x 890 x 1980
3500 x 890 x 1980
3500 x 890 x 1980
788 / 326 / 1221
788 / 326 / 1221
788 / 326 / 1221
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
108
108
108
8.7
8.7
8.7
51.3
51.3
51.3
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1479 / 1657
1479 / 1657
1479 / 1657
302
302
302
12.4
12.4
12.4
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD35D195-CHCH
Electrical Data
Unit Data - Full Function
SD35D195-CHCH-0
SD35D195-CHCH-1
SD35D195-CHCH-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CHCH
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
171
SmartCool 6 - 200kW
140.0
120.0
Technical
100.0
80.0
60.0
40.0
SD
20.0
0.0
0.00
1.00
2.00
3.00
SD18D085-CHCH-0
CHCH
1
2
3
4.00
5.00
6.00
7.00
SD25D135-CHCH-0
SD18D085-CHCH-0
SD22D105-CHCH-0
SD25D135-CHCH-0
Q
M
172
Kv Bypass
SD18D110-CH00
40
40
SD22D140-CH00
63
40
SD25D175-CH00
63
40
8.00
9.00
SmartCool 6 - 200kW
120.00
100.00
4 and 5
60.00
Technical
80.00
40.00
20.00
SD
0.00
0.00
2.00
4.00
6.00
8.00
10.00
12.00
14.00
4
5
SD31D165-CHCH-0
SD35D195-CHCH-0
Q
M
CHCH
Kv Cooling
Kv Bypass
SD31D215-CH00
63
63
SD35D255-CH00
63
63
173
SmartCool 6 - 200kW
Sound Measurement
SD18D085-CHCH-0
Technical
SD22D105-CHCH-0
SD25D135-CHCH-0
SD
SD31D165-CHCH-0
SD35D195-CHCH-0
Overall
dB(A)
Frequency (Hz) dB
63
125
250
500
1000
4000
8000
Discharge Air
61.8
64.9
75.9
62.7
54.9
48.7
46.2
38.7
31.1
Return Air
57.1
63.2
70.2
58.1
51.5
45.6
46.0
38.4
30.9
Case Breakout
63.2
70.4
75.2
65.5
59.2
52.8
49.3
45.3
36.7
Sound Pressure @ 3m
48.6
55.9
60.6
51.0
44.7
38.3
34.8
30.8
22.1
Discharge Air
65.8
69.0
79.9
66.6
58.7
52.8
50.5
43.1
35.3
Return Air
61.1
67.2
74.1
62.0
55.3
49.7
50.3
42.8
35.1
Case Breakout
67.1
74.5
79.1
69.5
63.0
56.9
53.7
49.7
40.9
Sound Pressure @ 3m
52.6
60.0
64.6
54.9
48.4
42.4
39.1
35.1
26.4
Discharge Air
64.8
67.9
78.9
65.7
57.9
51.7
49.2
41.7
34.1
Return Air
60.1
66.1
73.2
61.0
54.5
48.6
49.0
41.4
33.9
Case Breakout
66.1
73.4
78.2
68.5
62.2
55.8
52.3
48.3
39.7
Sound Pressure @ 3m
51.6
58.9
63.6
54.0
47.6
41.3
37.8
33.8
25.1
Discharge Air
65.8
68.9
79.9
66.7
58.9
52.7
50.1
42.7
35.0
Return Air
61.1
67.1
74.2
62.0
55.5
49.6
49.9
42.4
34.9
Case Breakout
67.1
74.4
79.2
69.5
63.2
56.8
53.3
49.3
40.7
Sound Pressure @ 3m
52.6
59.9
64.6
54.9
48.6
42.2
38.8
34.7
26.1
Discharge Air
68.5
71.8
82.6
69.4
61.5
55.6
53.2
45.8
38.0
Return Air
63.9
70.0
76.9
64.8
58.1
52.5
53.0
45.5
37.9
Case Breakout
69.9
77.3
81.9
72.2
65.8
59.7
56.4
52.4
43.7
Sound Pressure @ 3m
55.4
62.8
67.4
57.7
51.2
45.1
41.9
37.9
29.1
CHCH
174
2000
SmartCool 6 - 200kW
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
CHCH
SD
301
Technical
N1
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
175
SmartCool 6 - 200kW
SD18D090-CLCL-0
Technical
SD22D120-CLCL-0
SD25D140-CLCL-0
SD
SD31D190-CLCL-0
7 / 12 C
8 / 14 C
176
10 / 16 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
22 / 50
94.3
79.6
69.8
67.5
58.6
58.6
46.6
46.6
24 / 45
106.8
90.7
82.0
77.7
70.4
70.4
58.9
58.9
26 / 40
117.7
101.9
93.0
89.2
81.9
81.9
70.6
70.6
22 / 50
125.6
101.9
96.9
89.1
76.8
76.8
62.0
62.0
24 / 45
141.4
115.7
112.7
103.0
91.4
91.4
77.0
77.0
26 / 40
155.0
129.6
126.1
117.0
105.6
105.6
91.4
91.4
22 / 50
147.6
124.3
109.4
105.1
91.6
91.6
73.1
73.1
24 / 45
175.0
151.2
128.4
121.0
110.0
110.0
92.2
92.2
26 / 40
184.1
159.1
145.4
138.9
127.9
127.9
110.4
110.4
22 / 50
205.3
167.7
158.0
146.6
126.0
126.0
101.8
101.8
24 / 45
231.2
190.5
183.8
169.7
150.0
150.0
126.4
126.4
26 / 40
253.3
213.4
205.9
192.8
173.3
173.3
150.2
150.2
22 / 50
242.8
195.7
188.4
171.3
148.2
148.2
120.3
120.3
24 / 45
272.6
222.1
218.3
197.8
175.8
175.8
148.6
148.6
26 / 40
298.2
248.5
243.9
224.5
202.8
202.8
175.9
175.9
CLCL
SD35D225-CLCL-0
5 / 10 C
SmartCool 6 - 200kW
SD18D090-CLCL-0
SD22D120-CLCL-0
SD31D190-CLCL-0
18 / 24C
20 / 26 C
Temp. (C)
TC
SC
TC
SC
TC
SC
TC
SC
/ %RH
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
(kW)
33 / 26
84.5
84.5
73.6
73.6
64.8
64.8
53.5
53.5
35 / 24
94.7
94.7
83.9
83.9
75.5
75.5
64.4
64.4
37 / 22
104.9
104.9
94.3
94.3
86.1
86.1
75.2
75.2
33 / 26
107.9
107.9
94.2
94.2
83.7
83.7
69.6
69.6
35 / 24
120.4
120.4
107.1
107.1
96.9
96.9
83.2
83.2
37 / 22
133.2
133.2
119.9
119.9
110.1
110.1
96.5
96.5
33 / 26
131.9
131.9
115.0
115.0
101.2
101.2
83.6
83.6
35 / 24
147.8
147.8
131.0
131.0
117.9
117.9
100.7
100.7
37 / 22
163.8
163.8
147.2
147.2
134.4
134.4
117.5
117.5
33 / 26
177.2
177.2
154.7
154.7
137.4
137.4
114.1
114.1
35 / 24
197.9
197.9
175.8
175.8
159.1
159.1
136.5
136.5
37 / 22
218.9
218.9
197.0
197.0
180.7
180.7
158.5
158.5
33 / 26
206.5
206.5
180.4
180.4
160.7
160.7
133.9
133.9
35 / 24
230.4
230.4
204.9
204.9
185.8
185.8
159.7
159.7
37 / 22
254.6
254.6
229.3
229.3
210.9
210.9
185.0
185.0
SD
SD35D225-CLCL-0
17 / 22 C
Technical
SD25D140-CLCL-0
15 / 20 C
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
177
SmartCool 6 - 200kW
Technical Data SD CLCL Units
Mechanical Data
CLCL
SD
Technical
SD18D090-CLCL-0
178
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD18D090-CLCL-2
75.3
75.3
75.3
2.3
2.3
2.3
1800 x 890 x 1980
1800 x 890 x 1980
1800 x 890 x 1980
477 / 175 / 702
477 / 175 / 702
477 / 175 / 702
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
50
50
50
3.0
3.0
3.0
23.1
23.1
23.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1266 / 1657
1266 / 1657
1266 / 1657
538
538
538
5.3
5.3
5.3
mm
mm
54
22
kW
6
15.0
kg/hr
l/m
SD18D090-CLCL-1
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
8
8
8
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD18D090-CLCL
Electrical Data
Unit Data - Full Function
SD18D090-CLCL-0
SD18D090-CLCL-1
SD18D090-CLCL-2
(1)
40.3
39.7
72.2
50
50
100
9.9
9.9
17.0
16
16
20
mm
35
35
70
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
Humidifier
kg/hr
kW
6.0
6.0
6.0
8.7
9.2
15.8
SD
Capacity
Rating
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
179
SmartCool 6 - 200kW
Technical Data SD CLCL Units
Mechanical Data
CLCL
SD
Technical
SD22D120-CLCL-0
180
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD22D120-CLCL-1
SD22D120-CLCL-2
96.7
96.7
96.7
3.5
3.5
3.5
2200 x 890 x 1980
2200 x 890 x 1980
2200 x 890 x 1980
547 / 189 / 798
547 / 189 / 798
547 / 189 / 798
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
62
62
62
3.8
3.8
3.8
41.0
41.0
41.0
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
2 x 2.9
2 x 2.9
2 x 2.9
1491 / 1657
1491 / 1657
1491 / 1657
287
287
287
6.5
6.5
6.5
mm
mm
54
22
kW
6
15.0
54
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
13.5
54
22
6
15.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD22D120-CLCL
Electrical Data
Unit Data - Full Function
SD22D120-CLCL-0
SD22D120-CLCL-1
SD22D120-CLCL-2
(1)
64.2
64.7
115.6
80
80
160
9.9
9.9
17.0
16
16
20
mm
70
70
70
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
2 x 2.9
2 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2) kW
A
OPTIONAL EXTRAS
Electric Heating
Rating
kW
15.0
13.5
15.0
21.7
20.6
39.4
Technical
EC
2 x 2.9
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
181
SmartCool 6 - 200kW
Technical Data SD CLCL Units
Mechanical Data
CLCL
SD
Technical
SD25D140-CLCL-0
182
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD25D140-CLCL-1
SD25D140-CLCL-2
117.6
117.6
117.6
4.1
4.1
4.1
2500 x 890 x 1980
2500 x 890 x 1980
2500 x 890 x 1980
618 / 244 / 940
618 / 244 / 940
618 / 244 / 940
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
79
79
79
4.7
4.7
4.7
25.5
25.5
25.5
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
3 x 2.9
3 x 2.9
3 x 2.9
1337 / 1657
1337 / 1657
1337 / 1657
463
463
463
8.2
8.2
8.2
mm
mm
67
22
kW
6
22.5
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
6
20.3
67
22
6
22.5
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD25D140-CLCL
Electrical Data
Unit Data - Full Function
SD25D140-CLCL-0
SD25D140-CLCL-1
SD25D140-CLCL-2
(1)
79.4
79.4
142.8
100
100
200
14.3
14.3
24.5
20
20
32
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
EC
EC
3 x 2.9
3 x 2.9
4.5
4.5
7.5
Stage of Reheat
Number of Elements
(2) kW
A
OPTIONAL EXTRAS
Electric Heating
Rating
kW
22.5
20.3
22.5
32.5
30.9
59.1
Technical
EC
3 x 2.9
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
183
SmartCool 6 - 200kW
Technical Data SD CLCL Units
Mechanical Data
CLCL
SD
Technical
SD31D190-CLCL-0
184
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD31D190-CLCL-1
SD31D190-CLCL-2
158.8
158.8
158.8
5.4
5.4
5.4
3100 x 890 x 1980
3100 x 890 x 1980
3100 x 890 x 1980
727 / 305 / 1127
727 / 305 / 1127
727 / 305 / 1127
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
96
96
96
6.3
6.3
6.3
49.7
49.7
49.7
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1322 / 1657
1322 / 1657
1322 / 1657
473
473
473
10.7
10.7
10.7
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD31D190-CLCL
Electrical Data
Unit Data - Full Function
SD31D190-CLCL-0
SD31D190-CLCL-1
SD31D190-CLCL-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
24
24
24
Mains Supply
Control Circuit
VAC
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
185
SmartCool 6 - 200kW
Technical Data SD CLCL Units
Mechanical Data
CLCL
SD
Technical
SD35D225-CLCL-0
186
Capacity
Nom Cooling (Gross)
Fan Power Input (Fan Gain)
Dimensions - W x D x H
Weight - Machine Case / Fan Module / Operating
Construction
Material/Colour
Cooling Coil
Cooling / Dehum Stages
Water Volume
Water Flow Rate
Pressure Drop
Fan & Motor
Motor Type
Quantity x Motor Size
Speed @25Pa ESP / Maximum ESP
Maximum ESP
Nominal Airflow
Connections
Water Inlet / Outlet Condensate Drain Hose
Filtration
Quantity
Electric Heating (Total)
Humidifier
Capacity
Drain Pump Flow Rate
Feed / Drain
Hot Water Condensate Pump
Head
Flow
Drain
Cold Water Condensate Pump
Head
Flow
Drain
Upgraded Fan Motor - EC Motor
Quantity x Motor Size
Speed @ 25Pa / Maximum ESP
Maximum ESP
(1) kW
(2) kW
mm
(3) kg
l
l/s
kPa
(4) kW
rpm
Pa
m/s
SD35D225-CLCL-1
SD35D225-CLCL-2
185.4
185.4
185.4
7.2
7.2
7.2
3500 x 890 x 1980
3500 x 890 x 1980
3500 x 890 x 1980
788 / 326 / 1221
788 / 326 / 1221
788 / 326 / 1221
Frame: Sheet Metal Folded Profile, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint / Black Grey (RAL 7021)
Copper Tube / Turbulated Hydrophillic Coated Aluminium Fins
1 (Modulated) / 1
108
108
108
7.4
7.4
7.4
72.1
72.1
72.1
Backwards Curved, Centrifugal Direct Drive
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
1479 / 1657
1479 / 1657
1479 / 1657
302
302
302
12.4
12.4
12.4
mm
mm
67
22
kW
9
30.0
67
22
Disposable to BS EN779:2012 - G4 - 75mm Deep
9
27.1
67
22
9
30.0
kg/hr
l/m
30
30
30
7
7
7
3/4 BSPF Braided Flexible Hose / 22mm Hose Connection
m
l/m
5
9.0
5
9.0
10mm Stainless Steel Stub Connection
5
9.0
m
l/m
5
3.1
5
3.1
10mm Plastic Barb Connection
5
3.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(4) kW
rpm
Pa
SmartCool 6 - 200kW
SD35D225-CLCL
Electrical Data
Unit Data - Full Function
SD35D225-CLCL-0
SD35D225-CLCL-1
SD35D225-CLCL-2
(1)
94.7
94.1
170.0
125
125
200
18.7
18.7
32.0
25
25
40
mm
70
70
185
Mains Supply
Control Circuit
VAC
24
24
24
(2) kW
A
EC
EC
EC
4 x 2.9
4 x 2.9
4 x 2.9
4.5
4.5
7.5
OPTIONAL EXTRAS
Electric Heating
Stage of Reheat
Number of Elements
12
12
12
Rating
kW
30.0
27.1
30.0
43.4
41.2
78.8
Technical
Humidifier
kg/hr
30
30
30
Rating
kW
22.5
22.5
22.5
32.6
34.2
59.2
SD
Capacity
(1) Values given for full function units with standard selections for heating, humidification, supply air fans.
(2) Stated motor power is based on maximum electrical power absorbed
CLCL
SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.1.0_04_2014
187
SmartCool 6 - 200kW
200.00
Technical
2
150.00
100.00
SD
50.00
0.00
0.00
1.00
2.00
3.00
SD18D090-CLCL-0
CLCL
1
2
3
4.00
5.00
6.00
SD25D140-CLCL-0
SD18D090 - CLCL-0
SD22D120 - CLCL-0
SD25D140 - CLCL-0
Q
M
188
Kv Cooling
Kv Bypass
SD18D090-CLCL
40
40
SD22D120-CLCL
40
40
SD25D140-CLCL
63
63
7.00
8.00
9.00
SmartCool 6 - 200kW
5
4
150.00
Technical
200.00
100.00
50.00
0.00
2.00
4.00
6.00
8.00
10.00
12.00
14.00
SD
0.00
Flow Rate (l/s)
SD31D190-CLCL-0
4
5
SD35D225-CLCL-0
SD31D190 - CLCL-0
SD35D225 - CLCL-0
Q
M
CLCL
Kv Cooling
Kv Bypass
SD31D190-CLCL
63
63
SD35D225-CLCL
63
63
189
SmartCool 6 - 200kW
SD18D090-CLCL-0
SD
Technical
SD22D120-CLCL-0
SD25D135-CLCL-0
SD31D190-CLCL-0
SD35D225-CLCL-0
Frequency (Hz) dB
Overall
dB(A)
63
125
250
500
1000
2000
4000
8000
Discharge Air
61.8
64.9
75.9
62.7
54.9
48.7
46.2
38.7
31.1
Return Air
57.1
63.2
70.2
58.1
51.5
45.6
46.0
38.4
30.9
Case Breakout
63.2
70.4
75.2
65.5
59.2
52.8
49.3
45.3
36.7
Sound Pressure @ 3m
48.6
55.9
60.6
51.0
44.7
38.3
34.8
30.8
22.1
Discharge Air
65.8
69.0
79.9
66.6
58.7
52.8
50.5
43.1
35.3
Return Air
61.1
67.2
74.1
62.0
55.3
49.7
50.3
42.8
35.1
Case Breakout
67.1
74.5
79.1
69.5
63.0
56.9
53.7
49.7
40.9
Sound Pressure @ 3m
52.6
60.0
64.6
54.9
48.4
42.4
39.1
35.1
26.4
Discharge Air
64.8
67.9
78.9
65.7
57.9
51.7
49.2
41.7
34.1
Return Air
60.1
66.1
73.2
61.0
54.5
48.6
49.0
41.4
33.9
Case Breakout
66.1
73.4
78.2
68.5
62.2
55.8
52.3
48.3
39.7
Sound Pressure @ 3m
51.6
58.9
63.6
54.0
47.6
41.3
37.8
33.8
25.1
Discharge Air
65.8
68.9
79.9
66.7
58.9
52.7
50.1
42.7
35.0
Return Air
61.1
67.1
74.2
62.0
55.5
49.6
49.9
42.4
34.9
Case Breakout
67.1
74.4
79.2
69.5
63.2
56.8
53.3
49.3
40.7
Sound Pressure @ 3m
52.6
59.9
64.6
54.9
48.6
42.2
38.8
34.7
26.1
Discharge Air
68.5
71.8
82.6
69.4
61.5
55.6
53.2
45.8
38.0
Return Air
63.9
70.0
76.9
64.8
58.1
52.5
53.0
45.5
37.9
Case Breakout
69.9
77.3
81.9
72.2
65.8
59.7
56.4
52.4
43.7
Sound Pressure @ 3m
55.4
62.8
67.4
57.7
51.2
45.1
41.9
37.9
29.1
Sound Measurement
CLCL
190
SmartCool 6 - 200kW
L1 (Supply 1)
302
L2 (Supply 1)
303
L3 (Supply 1)
N2
Neutral (Supply 2)
304
L1 (Supply 2)
305
L2 (Supply 2)
306
L3 (Supply 2)
PE
Protective Earth
502
Fire Detector
583
Fire Detector
583
Smoke Detector
584
Smoke Detector
502
Remote On/Off
522
Remote On/Off
N (3*)
534
535
609
610
810
811
560
561
563
564
565
881
BMS Connection
882
BMS Connection
883
BMS Connection
CLCL
SD
301
Technical
N1
*For 220V/3PH NO neutral units the Neutral connection is replaced with a live phase.
191
SmartCool 6 - 200kW
After Sales
Warranty
All Airedale products or parts (non consumable) supplied for installation within the UK mainland and commissioned by
an Airedale engineer, carry a full Parts & Labour warranty for a period of 12 months from the date of commissioning or
18 months from the date of despatch, whichever is the sooner.
Parts or Equipment supplied by Airedale for installation within the UK or for Export that are properly commissioned in
accordance with Airedale standards and specification, not commissioned by an Airedale engineer; carry a 12 month
warranty on non consumable Parts only from the date of commissioning or 18 months from the date of despatch,
whichever is the sooner.
Parts or equipment installed or commissioned not to acceptable Airedale standards or specification invalidate all
warranty.
In the period between delivery and commissioning the equipment: is properly protected & serviced as per the Airedale
installation & maintenance manual provided where applicable the glycol content is maintained to the correct level.
In the event of a problem being reported and once warranty is confirmed as valid under the given installation and
operating conditions, the Company will provide the appropriate warranty coverage (as detailed above) attributable to the
rectification of any affected Airedale equipment supplied (excluding costs for any specialist access or lifting equipment
that must be ordered by the customer).
Any spare part supplied by Airedale under warranty shall be warranted for the unexpired period of the warranty or 3
months from delivery, whichever period is the longer.
To be read in conjunction with the Airedale Conditions of Sale - Warranty and Warranty Procedure, available upon
request.
Procedure
When a component part fails, a replacement part should be obtained through our Spares department. If the part is
considered to be under warranty, the following details are required to process this requirement. Full description of part
required, including Airedales part number, if known. The original equipment serial number. An appropriate purchase
order number.
A spares order will be raised under our warranty system and the replacement part will be despatched, usually within 24
hours should they be in stock. When replaced, the faulty part must be returned to Airedale with a suitably completed and
securely attached Faulty Component Return (FCR) tag. FCR tags are available from Airedale and supplied with each
Warranty order.
On receipt of the faulty part, suitably tagged, Airedale will pass to its Warranty department, where it will be fully
inspected and tested in order to identify the reason for failure, identifying at the same time whether warranty is justified
or not.
On completion of the investigation of the returned part, a full Report on Goods Returned will be issued. On occasion
the release of this complete report may be delayed as component manufacturers become involved in the investigation.
When warranty is allowed, a credit against the Warranty invoice will be raised. Should warranty be refused the Warranty
invoice becomes payable on normal terms.
Exclusions
Returns analysis
All faulty components returned under warranty are analysed on a monthly basis as a means of verifying component and
product reliability as well as supplier performance. It is important that all component failures are reported correctly.
192
SmartCool 6 - 200kW
193
Head Office
Airedale International Air Conditioning Ltd
Leeds Road
Rawdon
Leeds LS19 6JY
TM_SMARTCOOL_6_200kW_7674716_1.1.0_04_2014