Professional Documents
Culture Documents
Trend t4
Trend t4
T4
Dear Customer
CONTENTS
TECHNICALDATA_____________________ 1
SAFETY____________________________ 2-3
ELECTRICAL SAFETY_________________ 4
EC DECLARATION OF CONFORMITY ____ 5
ITEMS ENCLOSED____________________ 5
DESCRIPTION OF PARTS_______________ 6
ASSEMBLY & ADJUSTMENT
Dust Extractor Spout__________________ 7
Switching On & Off____________________ 8
Depth of Cut_________________________ 8
Fitting & Removing Cutters_____________ 9
Speed Control______________________ 10
Fine Height Adjuster__________________ 10
Fixing Points________________________ 10
OPERATION
Cutting Direction & Feed Speed________ 11
Moulding Natural Timbers_____________ 11
Side-Fence Routing__________________ 12
Template Guide Bush Routing__________ 13
Carving & Grinding___________________ 14
Bearing Guided Cutters_______________ 15
Freehand Routing____________________ 16
Batten Routing______________________ 16
MAINTENANCE ______________________ 17
ENVIRONMENTAL PROTECTION_______ 17
GUARANTEE________________________ 17
SPARE PARTS
Spare Parts List___________________ 18-19
Spare Parts Diagram_________________ 20
T4
WARNING: The declared vibration emission level
represents the main application of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the side effects of vibration such as:
maintain the tool and the accessories, keep hands
warm, organisation of work patterns.
ROUTER
T4E
TECHNICAL DATA
Voltage
Power input
Power output
850
No-load speed
min-1 11,500 -
32,000
Router
2 columns
carriage
Router carriage
mm 35
stroke
Revolver
mm 3-step, turret
depth stop
stop with
graduation
Collet size
1/4
6, 6.35, 8
6, 8
Cutter diameter,
max.
mm
Weight
kg 2.8
UK & Eire
230V tools
13 Amperes, in plug
UK & Eire
115V tools
16 Amperes, main
Europe
230V tools
10 Amperes, main
INTENDED USE
30
Fuses
dB(A) 85
dB(A) 96
dB(A 3
m/s2 3.0
m/s2 1.5
-1-
T4
SAFETY
WARNING:
-2-
T4
6. Respiratory protection. Wear a face
or dust mask, or powered respirator.
Dust masks/filters should be changed
regularly.
-3-
T4
Electrical Safety
Power Supply
The electric motor has been designed for one
voltage only. Always check that the power
supply corresponds to the voltage on the rating
plate. Machines marked for 230 volt can also be
operated from a 220 volt supply.
0.75 6
1.00 10
1.50 15
2.50 20
4.00 25
-4-
7.5 15 25 30 45 60
Voltage
Amperes
115
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
6
6
6
10
15
20
6
6
6
10
15
20
6
6
10
15
20
25
6
6
15
20
25
-
6
15
20
20
25
-
10
15
20
25
-
230
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
6
6
6
10
15
20
6
6
6
10
15
20
6
6
6
10
15
20
6
6
6
10
15
20
6
6
10
15
20
25
6
6
15
15
20
-
T4
EC DECLARATION OF
CONFORMITY
MACHINERY DIRECTIVE
MARKINGS ON TOOL
The following pictures are shown on the tool.
ROUTER
T4E
LABEL
min ..........................................minutes
........................................... Class II
................................................ Construction
A .............................................amperes
W ............................................watts
........................................... alternating
................................................current
no ...........................................no load speed
.../min ......................................revolutions or
................................................reciprocations
................................................per minute
Managing Director
Jeff Willcocks
ITEMS ENCLOSED
1
1
1
1
1
1
1
RESIDUAL RISKS
x
x
x
x
x
x
x
1 x
Impairment of hearing.
1 x
Risk of personal injury due to flying particles.
1 x
Risk of burns due to accessories becoming
1 x
hot during operation.
Risk of personal injury due to prolonged use
Check for damage to the tool, parts or
accessories which may have occurred during
Information on Noise
transport.
The noise level when working can exceed 85
Take the time to thoroughly read and
dB(A).
understand this manual prior to operation.
Wear ear protection!
-5-
T4
A
E
DESCRIPTIONOFPARTS
F
D Motor housing
G Grip knob
I
.
AA
G
.
E Power cable
F On/Off switch
Collet nut
K
.
L Router base
N Collet
O
R Side-fence body
S Spanner (14mm A/F) for spindle when in grinder mode
.
Q
AA Spindle lock
-6-
T4
ASSEMBLY & ADJUSTMENT
34mm
-7-
T4
Switching On & Off
n A slide switch on the front of the motor body
is used to turn the router on and off. When
fitting the motor unit to the base, ensure that
the switch is facing forwards.
Off
On
Slide switch
3
6
T4
1
2
Fitting Cutters
n Insert at least 34 of the shank length of the
cutter (1) into the collet assembly (2).
n Press the spindle lock (2) until the router
spindle is locked (you may need to turn the
spindle slightly to engage it).
Removing Cutters
-9-
T4
1
Dial Router
MIN
1
2
3
4
5
MAX
No.
Speed
11,500
15,000
18,300
21,700
25,000
28,500
32,000
rpm
rpm
rpm
rpm
rpm
rpm
rpm
115mm
M6
15mm
-10-
T4
OPERATION
Feed Speed
Sequence of plunging
Step One
Plunge down and lock the
motor carriage, with the
plunge locking lever.
Step Two
Carry out the routing
operation.
Cutting Direction
WARNING: The direction of routing
must always be opposite to the
cutters direction of rotation,
otherwise there is a risk of kick-back.
Step Three
Release the plunge locking
lever and the motor carriage
returns to the normal
position.
Feed direction
of router.
Direction of
bit rotation.
Feed Direction
-11-
T4
Side-Fence Routing
B
5
3
1
2
A
4
-12-
T4
Using the Guide Bush
Template
Template
guide bush
Workpiece
Alternatively it can
be used for cutting
shapes or making
panelling grooves.
Guide
bush ring
Cutter
Template
Guide bush
fitted to
router.
d
D
FORMULA
(D-d)
E= 2
Using a template
to rout an edge
straight.
-13-
T4
3
2
-14-
T4
Bearing Guided Cutters
T4
Freehand Routing with the Router
The T4 can also be used for signwriting or
creative freehand work without any form of
guide.
With practice, numbers or name plate designs
can be routed freehand. Draw the design or
motif on the workpiece and then rout the design,
taking shallow passes.
A V groove
cutter is ideal for
engraving designs
at shallow depths.
Batten Routing
Where a side-fence cannot be used, it is also
possible to guide the router along a batten
clamped across the workpiece (with an
overhang at both ends).
Guidance from a batten is similar to that
obtained from a side-fence. This method is
appropriate if the edge of the workpiece is not
straight or is not very smooth or simply the
guide rods of the side-fence are too short for
the job.
-16-
Fixed Jaw
Tightening lever
Workpiece
T4
MAINTENANCE
Cleaning
n Keep the machine clean at all times. Some
maintenance products and solvents may
damage the plastic parts, these include
products containing Benzene, Trichloroacetyl
Chloride and Ammonia.
n Never use any caustic agents to clean the
plastic parts.
Lubrication
n The bearings of the machine need no
lubrication, as they are sealed. The two
plunge columns on the routing base should
be slightly oiled from time to time.
n Keep the cooling vents on the motor housing
clean and unobstructed at all times. Blow
out any dust and dirt at regular intervals.
Changing Brushes
Ensure machine is isolated from
power supply.
Storage
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Accessories and packaging should be sorted
for environmental-friendly recycling.
2
1
Separate collection.
This product must not be disposed of
with normal household waste.
Household User
Business Users
WARNING: It is advisable to
have the brushes replaced by
an authorised Trend Service
Agent. The router will also be
given a thorough inspection.
GUARANTEE
The unit carries a manufacturers guarantee in
accordance with the conditions on the enclosed
guarantee card.
For the location of your nearest Trend Service
Agent, please call Trend Customer Services or
see our stockist locator at www.trend-uk.com.
-17-
T4
Please use only Trend original spare parts.
1
1
1
1
2
1
1
1
2
-
1
1
2
2
2
1
1
1
1
1
1
1
-
1
1
1
1
1
1
2
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
v2.2 02/2015
Ref.
Stator Housing
WP-T4/001
Top Vent Housing
WP-T4/002
Base
WP-T4/003
Spring Washer 4mm
WP-T4/004
Washer 4mm x 7mm x 0.8mm
WP-T4/005
Cable Guard
WP-T4/006
Speed Control Circuit Board 230V T4E
WP-T4E/007
Speed Control Circuit Board 115V T4EL
WP-T4EL/007
Carbon Brush Cover
WP-T4/008
-
Carbon Brush 230V (1 pair)
WP-T4E/010
Carbon Brush 115V (1 pair)
WP-T4EL/010
Carbon Brush Holder
WP-T4/011
Spring Washer 5mm
WP-WASH/29
Column End Cap
WP-T4/013
Plunge Locking Screw LH
WP-T4/014
Cable Clamp
WP-T4/015
Screw Self Tapping Pan 4mm x 12mm Pozi
WP-T4/016
Switch 230V T4
WP-T4E/017
Switch 115V T4EL
WP-T4EL/017
Push Rod
WP-T4/018
On / Off Lever
WP-T4/019
-
2 Core Cable with Plug 230V UK T4
WP-T4/021
2 Core Cable with Plug 230V Euro T4/EURO
WP-T4EURO/021
2 Core Cable with Plug 115V UK T4L
WP-T4L/021
Field 240V T4E
WP-T4E/022
Field 115V T4EL
WP-T4EL/022
Baffle
WP-T4/023
Machine Screw Pan M4 x 63mm Pozi
WP-T4/024
Top Bearing 7mm x 22mm x 7mm 608ZZ
WP-T4/025
Armature 230V with Fan T4
WP-T4E/026
Armature 115V with Fan T4EL
WP-T4EL/026
Lower Bearing Housing
WP-T4/027
Lower Bearing 17mm x 35mm x 10mm 6003ZZ
WP-T4/028
Screw Self Tapping Pan 4mm x 14mm Pozi
WP-T4/029
Collar Left Hand Threaded
WP-T4/030
Machine Screw Pan M6 x 55mm Pozi
WP-T4/031
Bearing Lock Plate
WP-T4/032
Collet Spring
WP-T4/033
Collet 6.35mm (14) CLT/T4/635
Collet 6mm
CLT/T4/6
Collet 8mm
CLT/T4/8
Collet Nut
CLT/NUT/T4
Depth Stop
WP-T4/036
Middle Frame
WP-T4/037
Thumb Knob
WP-T4/038
-18-
Qty.
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
1
1
1
1
1
1
1
2
2
2
2
1
1
3
1
1
1
1
1
1
1
2
1
1
2
2
1
4
1
1
1
1
1
1
3
2
2
1
1
1
1
1
1
1
-
1
4
1
1
1
1
v2.2 02/2015
Desc.
Ref.
Spring 8mm
Base Housing Lock Nut
Bolt Hex M6 x 48mm
Circlip 17mm
Plunge Lock Lever
Lower Housing Clamp Spacer
Torsion Spring 12mm Dia
Grip Knob
Plunge Spring
Plunge Column
Machine Screw Socket M5 x 12mm
Dust Extraction Spout Upper Housing
Threaded Pin M5 x 25mm
Nut Hex M5
Threaded Pin M5 x 35mm
Threaded Pin M5 x 15mm
Stepped Machine Screw M6
Revolving Turret
Ball for Revolving Turret
Spring for Revolving Turret
Set Screw M4 x 5mm slot
Set Screw M6 x 8mm
Plastic Base Slider
Spring Washer Revolving Guide Rubber
Machine Screw Csk M5 x 12mm Slot
Machine Screw Csk M5 x 8mm Slot
Guide Rod 8mm x 300mm (pair)
Machine Screw Csk M4 x 6mm Pozi
Side Fence Cheeks (pair)
Parallel Side Fence Body
Spanner Special 17mm A/F
Machine Screw Pan M4 x 12mm Pozi
Spanner 14mm A/F
Hex Key 4mm A/F
Machine Screw Csk M4 x 18mm Pozi
Washer 6mm x 11mm x 0.8mm
Spring Washer 6mm
Spindle Lock Housing
Spindle Lock Bracket
Spindle Lock Button
Spindle Lock Plate
Spring for Spindle Lock
Dust Spout Lower Housing
Switch Base
-
Machine Screw Pan M4 x 14mm Pozi
Screw Self Tapping Pan 4mm x 20mm
Depth Stop Knob
Side Fence Complete with Rods
Guide Bush 16mm
Manual
WP-T4/039
WP-T4/040
WP-T4/041
WP-T4/042
WP-T4/043
WP-T4/044
WP-T4/045
WP-T4/046
WP-T4/047
WP-T4/048
WP-SCW/12
WP-T4/050
WP-T4/051
WP-NUT/05
WP-T4/053
WP-T4/054
WP-T4/055
WP-T4/056
WP-T4/057
WP-T4/058
WP-T4/059
WP-T4/060A
WP-T4/061
WP-T4/062
WP-SCW/11
WP-SCW/09
WP-T4/065
WP-SCW/66
WP-T4/067
WP-T4/068
WP-T4/069
WP-T4/070
WP-SPAN/14P
WP-AP/04
WP-T4/073
WP-T4/074
WP-WASH/30
WP-T4/076
WP-T4/077
WP-T4/078
WP-T4/079
WP-T4/080
WP-T4/081
WP-T4/082
WP-T4/084
WP-T4/085
WP-T4/086
WP-T4/087
GB16/B
MANU/TA
-19-
T4
T4 - SPARE PARTS DIAGRAM
v2.2 02/2015
25
21
6
84
4
5
26
11
8
10
7
27
31
15
85
28
30
59
32
36
74
75
40
44
41
70
4
5
43
46
13
14
42
45
39
86
82
29
16
17
18
37
33
34
35
47
50
22
19
48
5
4
23
24
81
63
77
53
55
52
51
54
62
56
57
58
60
78
80
76
79
73
38
65
39
49
12
60
66
3
66
61
88
64
67
71
69
72
-20-
T3ER
ROUT
89
68
87
MANU/T4 v4.0
RECYCLABLE
Copyright Trend 2013, 2015. No part of this publication may be reproduced, stored or transmitted in any form without prior
permission. Our policy of continuous improvement means that specifications may change without notice. Trend Machinery and Cutting
Tools cannot be held liable for any material rendered unusable or any form of consequential loss. E&OE
All registered trademarks acknowledged.