Fluke 360: Technical Data AC Leakage Current Clamp Meter

Fluke 360
AC Leakage Current Clamp Meter
Technical Data
The Fluke 360, a rugged and accurate

solution for leakage current measurement
Ideally designed for non-invasive checks of insulation
condition, the Fluke 360 allows you to perform tests without
powering down the installation or disconnecting equipment saving you time, without compromising on quality or safety.
The unique jaw design of the Fluke 360 eliminates the
influence of adjacent current conductors, and minimizes the
effects of external magnetic fields, even at low currents.
This allows you to perform accurate and reliable tests in
todays crowded electrical environments. The tough and
high-quality clamp design of the Fluke 360 guarantees high
stability for long-term repeatability.
Measurement of leakage current with 3 mA range and 1 A of

resolution, for accurate monitoring of insulation erosion
Broad range of measurement, from 1 A up to 60 A, for all

installation needs
Advanced shielding to ensure accurate results when measuring near
other conductors
The high durability clamp construction can withstand over 50,000
operations - added ruggedness that extends the life of your clamp.
Easy-to-carry, pocket-sized clamp with wide 40 mm (1.5 in) jaw size
Handy Display-Hold button for capturing readings in hard-
to-reach places
Auto power-off, with warning buzzer, saves battery life
Conformance to IEC1010 and EMC standard for confident
measurements
Meets all of the applications and performance classes in safety
standard VDE0404-4 and VDE0702 for leakage current and
differential current measurement of electrical appliances
Special Features
IEC 61010 and EMC Conformance
High Accuracy
IEC 61010 safety features including a tactile barrier and

special jaw design provide the user with confidence
when making measurements in hazardous voltage areas.
Conformance to EMC standards ensures high reliability
through reduced susceptibility to electromagnetic interference.
The Fluke 360 also meets the latest safety standard
VDE0404-4 and the new VDE0702 requirements.
Advanced jaw design means that the Fluke 360 accuracy

is little affected by external magnetic fields even at low
currents. Typical external current rejection is 200,000:1.
General Specification
Method of detection
Mean value
Display
Digital display: 3200 counts

Bar-graph display: 32 segments, LCD
Measurement cycle
2 times/second (Digital display), 12 times/second (Bar-graph display)
Range switching
Auto-range
Ambient temperature and humidity
0 C to 50 C, 80 % RH or less (no condensation)
Temperature coefficient
0.05 % of range/C or less (within the ranges of 0 C to 18 C and

28 C to 50 C for measurement of 0-50 A)
Influence of external magnetic field
0.0005 % typical 1 (on current value of adjacent cable)
Influence of conductor position
Within accuracy
Circuit voltage
300 Vrms
Safety standard
EN 61010-1, EN 61010-2-032. 300 V CAT II, Pollution Degree 2
Withstanding voltage
3.7 kV ac for one minute
Battery type
1 x 3 V Lithium battery (button cell) CR2032
Battery life
Approx. 90 hours (when continuously used)
Auto power-off
Approx. 10 minutes
Diameter of measurable conductor
40 mm max.
Weight
200 g (441 lb)
Dimension
176 mm x 70 mm x 25 mm (6.9 in x 2.8 in x 1 in)
Operating altitude
2000 m (6,562 ft)
Electrical Specification
Specifications at 23 5 C. 80 % RH max
Accuracy: (% rdg + dgt) = (% readout + value of least significant digit)
AC Current Measurement
Measuring range
Resolution
3 mA
0.001 mA
30 mA
0.01 mA
30 A
0.01 A
60 A
0.1 A
Accuracy
Max Permissible current
1%+5
1 % + 5 (0~50 A)
5 % + 5 (50~60 A)
Mean value detection and rms-value calibration.

Accuracy specified at 50/60 Hz
Frequency range 15 Hz to 150 Hz
Fluke Corporation Fluke 360 AC Leakage Current Clamp Meter
60 A rms
Fluke. Keeping your world

up and running.
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
2006 Fluke Corporation. All rights reserved.
Specifications subject to change without notice.
Printed in U.S.A. 12/2006 Pub_ID: 11201-eng

Fluke 360: Technical Data AC Leakage Current Clamp Meter

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fluke 360: Technical Data AC Leakage Current Clamp Meter

Uploaded by

Copyright:

Available Formats

Fluke 360

AC Leakage Current Clamp Meter

The Fluke 360, a rugged and accurate

Measurement of leakage current with 3 mA range and 1 A of

Broad range of measurement, from 1 A up to 60 A, for all

Advanced shielding to ensure accurate results when measuring near

IEC 61010 safety features including a tactile barrier and

Advanced jaw design means that the Fluke 360 accuracy

Digital display: 3200 counts

2 times/second (Digital display), 12 times/second (Bar-graph display)

Ambient temperature and humidity

0 C to 50 C, 80 % RH or less (no condensation)

0.05 % of range/C or less (within the ranges of 0 C to 18 C and

Influence of external magnetic field

0.0005 % typical 1 (on current value of adjacent cable)

Influence of conductor position

EN 61010-1, EN 61010-2-032. 300 V CAT II, Pollution Degree 2

3.7 kV ac for one minute

1 x 3 V Lithium battery (button cell) CR2032

Approx. 90 hours (when continuously used)

Diameter of measurable conductor

200 g (441 lb)

176 mm x 70 mm x 25 mm (6.9 in x 2.8 in x 1 in)

2000 m (6,562 ft)

Max Permissible current

Mean value detection and rms-value calibration.

Fluke. Keeping your world

You might also like