Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Wind Turbine

    Uploaded by

    Irfai Al Rofy
    Wind turbines convert the kinetic energy of wind into electrical energy. They consist of rotor blades, a gearbox, shafts, a generator, and a tower. The rotor blades are made of fiberglass and steel and capture the wind. A gearbox contains gears that connect the low and high-speed shafts, increasing rotational speed to power the generator. The generator, located inside the tower, uses copper coils and magnets to transform the rotational energy into electricity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Wind Turbine

    Uploaded by

    Irfai Al Rofy
    38 views2 pages
    Wind turbines convert the kinetic energy of wind into electrical energy. They consist of rotor blades, a gearbox, shafts, a generator, and a tower. The rotor blades are made of fiberglass and steel and capture the wind. A gearbox contains gears that connect the low and high-speed shafts, increasing rotational speed to power the generator. The generator, located inside the tower, uses copper coils and magnets to transform the rotational energy into electricity.

    Original Description:

    penjelasan kerja dari turbin angin

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Wind turbines convert the kinetic energy of wind into electrical energy. They consist of rotor blades, a gearbox, shafts, a generator, and a tower. The rotor blades are made of fiberglass and steel and capture the wind. A gearbox contains gears that connect the low and high-speed shafts, increasing rotational speed to power the generator. The generator, located inside the tower, uses copper coils and magnets to transform the rotational energy into electricity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    38 views2 pages

    Wind Turbine

    Uploaded by

    Irfai Al Rofy
    Wind turbines convert the kinetic energy of wind into electrical energy. They consist of rotor blades, a gearbox, shafts, a generator, and a tower. The rotor blades are made of fiberglass and steel and capture the wind. A gearbox contains gears that connect the low and high-speed shafts, increasing rotational speed to power the generator. The generator, located inside the tower, uses copper coils and magnets to transform the rotational energy into electricity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    WIND TURBINE

    Wind turbines are used to generate electricity from the kinetic power of the wind.wind
    turbine consists of several components. including rotor blades, gear box, low-speed shaft,
    hight speed shafts, generator, and a tower.
    1. structures
    propeller blades are made of fiberglass and steel.
    gear box contains the gear is made of solid steel.
    low-speed shafts made of mild steel rods.
    hight speed shafts made from the same material as the low-speed shaft but larger
    and short.
    tower made of reinforced concrete.
    generator is made of steel and includes a magnet and a coil of copper
    2. properties and shapes
    propeller blades have a tough material that is not easily damaged. shaped like an
    oval and flat. though made of tough lightweight propeller blades should remain so
    easily driven wind.
    gear box contains interrelated gear arrangement that hard. shape is a toothed
    wheel with a size that is different.
    low-speed shaft (LSS) and hight speed shaft (HSS) has a tough and hard material
    because it is made of steel. tube shape, LSS pick stem longer than the HSS.
    generator is the most important tool is a tubular instrument that contains magnets
    and copper windings. protector is made of hard material that is heat resistant.
    tower is the most tough and hard, because the tower is the buffer of the other part.
    tubular tower upright.
    3. location
    propeller blades are in the front position

    LSS is behind the propeller blades.

    gear box is between LSS and HSS.

    the generator is behind the other.

    and all of them are in the top tower


    4. measurement
    the length of the propeller blades is 5 m, and 15 cm thick.

    LSS length is about 40 cm,

    while HSS is only about 20 cm in length.

    gear possess different sizes and there is a big difference small.

    diameter generator has about 50 cm.

    tower has a height of 50 m and a diameter of 50 cm.


    5.function
    propeller blades serves to catch the wind and rotate the LSS.
    LSS serves to turn the gear that connects to the HSS.
    gear box serves to connect the LSS and HSS and maintain the speed of rotation.
    HSS serves to increase the rotation speed of the generator.
    generator serves to transform mechanical energy into electricity.
    tower serves to support the existing tools on it.
    6. the way it works is:
    first when the wind moving the propeller blades, propeller blades will rotate LSS.
    after the round of LSS will rotate gear in the gear box.
    The next gear that spins will be connected to HSS.

    when HSS spin and rotate the generator, copper windings will rotate and when the
    magnet will generate electricity.
    electricity will be supplied to the subsequent settlement.

    You might also like