Armstrong

Series 4600F
HSC Fire Pumps & Packaged Systems

FILE NO:
DATE:
SUPERSEDES:
DATE:
F43.11
May 26, 2008
F43.11
Dec. 15, 2007
Series 4600F
Series 4600F - Truly Superior

The Series 4600F, drawing on
over 100 years of pump design
Recirculation
expertise and leadership, is the
f External Water Seal

Recirculation Lines
state of the art in Horizontal Split

Case pumps. It meets or exceeds
the requirements of NFPA and
testing laboratories involved in fire
Coupling
protection such as UL, ULC, & FM.
fUL Listed close-coupled coupling
The family of pumps capitalize on

the Tilted Parting concept to
minimize turbulence at the eye of
the impeller by its straight laminar
approach, thus maximizing
efficiency. The family was
designed with commonality of
parts, low installation cost, and
ease of maintenance objectives.
The pumps compact sizes are
ideally suited for space saving
packages and retrofit applications.
Stuffing Box Housing

fSelf contained Combination
Bearing & Seal Housing
f Permits packing change-out
without having to be removed
Drip Containment
fFitted with drain connection
Casing Wear Ring

f Replaceable Case Wear Rings
fLocked to prevent rotation or
axial displacement
f Impeller Wear Ring available
as an option
Pump Casing
f Designed to withstand the high
pressure requirement typical in
fire protection
Impeller
Shaft Sealing with Packing
fHydraulically balanced double suction

fDynamically balanced
fMinimum axial thrust
fHigh efficiency throughout operating range
fThree-piece Split Gland standard

fPacking replaceable without
disturbing wetted parts
fStuffing Box Extension
designed for easy access
Shaft Sleeves
fReplaceable bronze sleeves
fProtects shaft throughout
Stuffing Box
Bearings
f Easy removal with bearing nut
f Sealed, permanently greased
bearings
f Low Friction Lost Bearing
f Maintenance free
Tilted Parting Design Casing

fPermits laminar approach to eye of Impeller
fLower NPSH required
fLower pump profile
fMinimum pump footprint
fRemoveable rotating element without disturbing piping
fLow foot-mounted Casing to reduce vibrations
Bearing Housing
15 ANGLE CASING
f Removable without
removing top casing
Shaft
fMinimum deflection for long bearing life
fMinimum vibrations
f Identical shaft and parts for left and
right-hand drives
Suction and
Discharge on
same center line
HSC Fire Pumps & Packaged Systems
JOCKEY
CONTROLLER
FIRE PUMP
CONTROLLER
FUEL
TANK
12
3
M
AR
10
ST RONG
11
Horizontal
Fire
Systems
With years of experience in fire protection

industry, Armstrong can supply fire pump
systems with all necessary accessories ready
for site installation.
GUARANTEED ADVANTAGES
f Simplifies piping design
f Single source unit responsibility
f A complete package that will meet
NFPA-20 requirements
FIRE PUMP - ELECTRIC DRIVEN
1. Pump/motor
2. Fire pump controller
(with optional transfer switch)
3. Suction and discharge gauges
4. Air release valve
5. Casing relief valve (not shown)
6. Jockey pump
7. Common base
Features common to electric and diesel

Accessories - (electric or diesel)
Accessories - special for diesel or VFD
7
FIRE PUMP - DIESEL ENGINE DRIVEN
1. Pump/engine assembled with
fCooling system
fFuel system
fBattery system
fExhaust system
2. Fire pump controller
3. Suction and discharge gauges
4. Air release valve
6. Jockey pump
7. Common base
ACCESSORIES - ADDITIONAL (ELECTRIC OR DIESEL)

8.
9.
10.
11.
Suction OS&Y gate valve

Discharge butterfly valve
Check valve
Test tee
ACCESSORIES - SPECIAL FOR DIESEL OR VFD

12. Main relief valve
13. Enclosed cone (not shown)
fFire Pump Coverage Chart

Electrical 60 hz
Rated Capacity (L/min)
1890
2850
3800
4750
5700
7600
9500
11400
250
3600 RPM
1750
6 X 5 X 12
6 X 5 X 12
6 X 5 X 12
8 X 6 X 12.5
1500
200
1250
150
8 X 6 X 10
5 X 4 X 10
5 X 4 X 10
6 X 5 X 10
8 X 6 X 15
100
6 X 5 X 15
8 X 6 X 15
10 X 8 X 14
6 X 5 X 15
50
5 X 4 X 12
6 X 5 X 12
8 X 6 X 12.5
1000
12 X 8 X 18
8 X 6 X 10
12 X 8 X 18
750
12 X 8 X 18
10 X 8 X 14
500
8 X 6 X 12.5
275
500
750
1000
1250
1500
2000
2500
4750
5700
7600
9500
3000
Rated Capacity (USGPM)

Electrical 50 Hz
Rated Capacity (L/min)
1890
2850
3800
3000 RPM
250
1750
6 X 5 X 15
200
1500
6 X 5 X 15
6 X 5 X 15
10 X 8 X 14
10 X 8 X 14
6 X 5 X 12
150
1250
6 X 5 X 12
1000
8 X 6 X 12.5
8 X 6 X 12.5
5 X 4 X 10
100
10 X 8 X 11
6 X 5 X 10
8 X 6 X 10
5 X 4 X 10
50
6 X 5 X 9.5
8 X 6 X 10
8 X 6 X 16
8 X 6 X 16
8 X 6 X 16
750
8 X 6 X 10
8 X 6 X 15
10 X 8 X 14
12x8x18
500
275
500
750
1000
1250
1500
2000
Rated Capacity (USGPM)

Note: Higher ranges may be available for diesel driven applications.
2500
Rated Head (kPa)
Rated Head (psi)
1500 RPM
Rated Head (kPa)
Rated Head (psi)
1800 RPM
fTypical Specifications
Horizontal Fire Pump - Electric Motor Driven*

Supply and install as indicated on plans one (1) fire pump system consisting of:
1. FIRE PUMP
One Armstrong, SERIES 4600F, Size _____________ double suction
horizontal split case fire pump listed by [Underwriters Laboratories of
Canada (ULC)], [Underwriters Laboratories Inc. (UL)] and/or [approved by
Factory Mutual (FM)] having a capacity of _______________ USGPM for a
pressure boost of _______________ PSIG. Suction pressure
______________ PSIG.
Pump casing shall be of cast iron, axially split with a 15 angle that will
minimize NPSH requirements and dimensions. Lower half shall contain
suction and discharge nozzles. Suction and discharge connections shall be
on the same elevation. Top half and rotating element shall be removable
without disturbing the piping. Casing shall be fitted with replaceable bronze
wearing rings. Impeller shall be bronze, double suction, enclosed type fully
balanced and keyed to an alloy steel shaft. Shaft shall to be fitted with
replaceable bronze sleeves. Shaft shall be mounted in two dust tight deep
grooves, sealed, and permanently greased ball bearings.
5. FIRE PUMP CONTROLLER

The fire pump controller shall be specifically approved for fire pump service
by [ULC], [UL] and/or [FM]. The controller shall be of the combined manual
and automatic stop, _______________starting method, Model ____________
as manufactured by___________. All equipment shall be enclosed in an
approved drip proof enclosure. The control equipment shall be completely
assembled, wired and tested at point of manufacture prior to shipment.
Circuit breaker shall have an interrupting capacity of _________kAmps or a
withstand rating of ____________ kAmps RMS.
Water pressure switch shall be suitable for _________ PSI working pressure.
5A. FIRE PUMP CONTROLLER AND AUTOMATIC TRANSFER

SWITCH COMBINATION
The automatic transfer switch controller combination shall be approved by
[UL], [ULC] and/or [FM], Model ________________ as manufactured
by________________. The automatic transfer switch and the pump controller
shall each be mounted in separate enclosures, mechanically attached to
form one unit and provide for protected interlock wiring.
Bearings shall be mounted in cartridge type housing so that they shall be

replaceable without opening pump casing. Bearings shall be easily
removable by rotating bearing removal nut. No special tools or bearing puller
are to be necessary.
The automatic transfer switch shall be capable of automatic power transfer

from normal to alternate_______________ [generator] / [second utility]
emergency power source in case of normal supply failure and automatically
re-transfer after restoration of normal power conditions.
Each stuffing box shall be fitted with a three piece bronze gland. Stuffing box
shall be fitted with a stuffing box extension to facilitate the packing rings
removal. Packing rings shall be removable without disturbing wetted parts or
the pump bearings. Water seal recirculation lines made from non-corroding
material shall be piped to pump volute.
6. JOCKEY PUMP
2. ELECTRIC MOTOR
The fire pump shall be directly coupled through flexible coupling to a
horizontal electric motor with a maximum HP of_____________ at
__________RPM, _________ VOLT , _______ PHASE _________ CYCLE.
Motor shall be UL Listed for fire pump service, open drip proof, standard
efficiency with 1.15 service factor.
The pump shall be supplied with the following accessories:
f
f
f
One (1) combination suction gauge 3 dial type with cock and lever
handle.
One (1) discharge gauge, 3 dial type, with cock and lever handle.
One (1) air release valve.
One (1) casing pressure relief valve.
4. OTHER ACCESSORIES
Pump shall be fitted with one (1) eccentric suction reducer and one (1)
concentric discharge increaser, as required (by mechanical contractor) to fit
NFPA20 recommended piping sizes.
One (1) outside test header shall be supplied with one (1) set of ____ x
2 hose valves with caps and chains.
S. A. Armstrong Limited
23 Bertrand Avenue
Toronto, Ontario
Canada, M1L 2P3
T: (416) 755-2291
F (Main): (416) 759-9101
7. JOCKEY PUMP CONTROLLER

The jockey pump shall be controlled by an automatic jockey pump
controller model___________ as manufactured by ___________with
full voltage starter.
8. MOUNTING AND TESTING
3. MINIMUM FITTINGS
The jockey pump shall be manufactured by _____________

Model______________ for a capacity of __________ USGPM and a pressure
boost of ____________ PSIG. The jockey pump shall be driven by an [open
drip proof] [totally enclosed fan cooled] electric motor of _______HP
________ RPM __________ VOLT ______ PHASE________ CYCLE.
Armstrong Pumps Inc.

93 East Avenue
North Tonawanda, New York
U.S.A., 14120-6594
T: (716) 693-8813
F: (716) 693-8970
The fire pump shall be suitable for a maximum working pressure of

__________. The fire pump shall be hydrostatically tested at twice the
maximum working pressure for at least 5 minutes. The fire pump shall be
performance tested at rated speed. The fire pump shall furnish not less than
150% of rated capacity at a pressure not less than 65% of rated head. The
shut-off total head of the fire pump should not exceed 140% of total rated
head. A certified test curve, indicating the flow, head, power and efficiency
shall be supplied for the field acceptance test. The fire pump and electric
motor shall be base mounted and aligned at the pump manufacturers
factory. Final alignment shall be made after installation on site
* Please refer to Armstrong Fire Pump Catalogue for Diesel Driven Typical
Specifications.
Armstrong Holden Brooke Pullen

Wenlock Way
Manchester
United Kingdom, M12 5JL
T: +44 (0) 161 223 2223
F: +44 (0) 161 220 9660
S.A. Armstrong Limited 2008
For Armstrong locations worldwide, please visit www.armstrongpumps.com

Armstrong

Uploaded by

Copyright:

Available Formats

Armstrong

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Armstrong

Uploaded by

Copyright:

Available Formats

Series 4600F

HSC Fire Pumps & Packaged Systems

Series 4600F - Truly Superior

expertise and leadership, is the

f External Water Seal

state of the art in Horizontal Split

protection such as UL, ULC, & FM.

fUL Listed close-coupled coupling

The family of pumps capitalize on

Stuffing Box Housing

Casing Wear Ring

Shaft Sealing with Packing

fHydraulically balanced double suction

fThree-piece Split Gland standard

Tilted Parting Design Casing

HSC Fire Pumps & Packaged Systems

With years of experience in fire protection

Features common to electric and diesel

ACCESSORIES - ADDITIONAL (ELECTRIC OR DIESEL)

Suction OS&Y gate valve

ACCESSORIES - SPECIAL FOR DIESEL OR VFD

fFire Pump Coverage Chart

Rated Capacity (USGPM)

Rated Capacity (USGPM)

Rated Head (kPa)

Rated Head (psi)

Rated Head (kPa)

Rated Head (psi)

Horizontal Fire Pump - Electric Motor Driven*

5. FIRE PUMP CONTROLLER

5A. FIRE PUMP CONTROLLER AND AUTOMATIC TRANSFER

Bearings shall be mounted in cartridge type housing so that they shall be

The automatic transfer switch shall be capable of automatic power transfer

The pump shall be supplied with the following accessories:

7. JOCKEY PUMP CONTROLLER

The jockey pump shall be manufactured by _____________

Armstrong Pumps Inc.

The fire pump shall be suitable for a maximum working pressure of

Armstrong Holden Brooke Pullen

For Armstrong locations worldwide, please visit www.armstrongpumps.com

You might also like