Damping Exercise
Damping Exercise
Damping Exercise
1) A mass of 10kg is suspended from one end of a helical spring, the other end
being fixed. The stiffness of the spring is10N/mm.The viscous damping causes
the amplitude to decreases to one-tenth of the initial value in four complete
oscillations. If a periodic force of 150cos50t N is applied at the mass in the
vertical direction .Find the amplitude of the forced vibrations? What is its value
of resonance?
2) A single cylinder vertical petrol engine of total mass of 200kg is mounted upon
a steel chassis frame. Thevertical static deflection of the frame is 2.4mm due
to the weight of the engine .The mass of the reciprocating parts is 18kg and
stroke of piston 160mm with S.H.M.If dashpot of damping coefficient of
1N/mm/s used to damped the vibrations, calculate al steady state
(i)Amplitude of vibrations at 500rpm engine speed.(ii)The speed of the driving
shaft at which resonance will occurs.
3) The mass of an electric motor is 120kg and it runs at 1500rpm.The armature
mass is 35kg and its centre of gravity lies 0.5mm from axis of rotation. The
motor is mounted on five springs of negligible damping. So that the force
transmitted is one-eleventh of the impressed force. Assume that the mass of
the motor is equally distributed among the five springs. Determine (i) the
stiffness of the spring (ii) Natural frequency of system.
4) The following data are given for a vibratory system with viscous damping.
Mass=2.5kg s=3N/mm x6=0.25x1. Determine the damping coefficient of
the damper in the system?
5) A machine part of mass 2kg vibrates in a viscous medium. Determine the
damping coefficient when a harmonic exciting force of 25N results in resonant
amplitude of 12.5 mm with a period of 0.2 seconds. If the system is excited
by a harmonic force of frequency 4Hz what will be the percentage increase in
the amplitude of vibration when damper is removed as compared with that
with damping?
MODULE 4
PART A
1. Discuss how a single revolving mass is balanced by two masses
revolving in different planes
MODULE 5
PART A
1) Derive the expression for balancing of V engine.
2) Write a short note on primary and secondary balancing.
3) Explain why only a part of the unbalanced force due to reciprocating
masses is balanced by revolving mass.
4) Derive the following expressions, for an uncoupled two cylinder
locomotive engine a. Variation is tractive force ; (b) Swaying couple ;
and (c) Hammer blow.
5) What are in-line engines ? How are they balanced ? It is possible to
balance them completely ?
6) Explain the direct and reverse crank method for determining
unbalanced forces in radial engines.
7) Discuss the balancing of V-engines.
PART B
1) The reciprocating masses of the first three cylinders of a four cylinder engine
are 4.1, 6.2 and 7.4 tonnes respectively. The centre lines of the three cylinders
are 5.2 m, 3.2 m and 1.2 m from the fourth cylinder. If the cranks for all the
cylinders are equal, determine the reciprocating mass of the fourth cylinder
and the angular position of the cranks such that the system is completely
balanced for the primary force and couple. If the cranks are 0.8 m long, the
connecting rods 3.8 m, and the speed of the engine 75 r.p.m. ; find the
maximum unbalanced secondary force and the crank angle at which it occurs.
2) A four cylinder inline marine oil engine has cranks at angular displacement of
90. The outer cranks are 3 m apart and inner cranks are 1.2 m apart. The
inner cranks are placed symmetrically between the outer cranks. The length
of each crank is 450 mm. If the engine runs at 90 r.p.m. and the mass of
reciprocating parts for each cylinder is 900 kg, find the firing order of the
cylinders for the best primary balancing force of reciprocating masses.
Determine the maximum unbalanced primary couple for the best
arrangement.
3) In a four crank symmetrical engine, the reciprocating masses of the two
outside cylinders A and D are each 600 kg and those of the two inside
cylinders B and C are each 900 kg. The distance between the cylinder axes of
A and D is 5.4 metres. Taking the reference line to bisect the angle between
the cranks A and D, and the reference plane to bisect the distance between
the cylinder axes of A and D, find the angles between the cranks and the
distance between the cylinder axes of B and C for complete balance except
for secondary couples. Determine the maximum value of the unbalanced
secondary couple if the length of the crank is 425 mm, length of connecting
rod 1.8 m and speed is 150 r.p.m.
4) A three cylinder radial engine driven by a common crank has the cylinders
spaced at 120. The stroke is 125 mm, length of the connecting rod 225 mm
and the mass of the reciprocating parts per cylinder 2 kg. Calculate the
primary and secondary forces at crank shaft speed of 1200 r.p.m.
5) The pistons of a 60 twin V-engine has strokes of 120 mm. The connecting
rods driving a common crank has a length of 200 mm. The mass of the
reciprocating parts per cylinder is 1 kg and the speed of the crank shaft is
2500 r.p.m. Determine the magnitude of the primary and secondary forces.
6) A twin cylinder V-engine has the cylinders set at an angle of 45, with both
pistons connected to the single crank. The crank radius is 62.5 mm and the
connecting rods are 275 mm long. The reciprocating mass per line is 1.5 kg
and the total rotating mass is equivalent to 2 kg at the crank radius. A balance
mass fitted opposite to the crank, is equivalent to 2.25 kg at a radius of 87.5
mm. Determine for an engine speed of 1800 r.p.m. ; the maximum and
minimum values of the primary and secondary forces due to the inertia of
reciprocating and rotating masses.