HawkEye Elite Alignment Systems

Greater profit and productivity through innovation

NEW!

Hunter's latest productivity features!

New adaptor design!

New target design!

Faster setups!

No metal-to-metal
contact!

u 

No knob twisting!

Lighter design!
Narrower profile!
Faster readings!

NEW!

High-resolution cameras!
Four high-resolution cameras
provide alignment measurements
with pinpoint accuracy.

Recall specs in a snap!

QuickComp !

Compensate all
wheels and capture
initial measurements
in one motion.

New console design!

Integrated storage and
charging for popular
accessories.*

* Available only on mobile WA400 consoles.

** Standard with WA400 consoles, optional with WA300 consoles.

Recall OE specs and vehiclespecific alignment procedures

instantly.**
Patented steering
system reset integration!
Reset computerized steering
systems on a wide variety
of vehicles with one
simple tool.
Convenient storage!
Store targets within arms reach
to maximize productivity.

Remote Indicator sold separately.

New QuickGrip wheel adaptors & three-dimensional

Hunter's patented QuickGrip adaptors and threedimensional targets accelerate service with set-up
times in seconds instead of minutes...

Extremely Fast Installation

4 Spring-loaded arms

grip the tire

4 T
 humb switch

secures the clamp

4 Off-center clamping

has no effect on
accuracy

Avoid Damage to Expensive Rims

4 Grips tire, not rim
4 No metal-to-metal

contact
4 Only protective ring

contacts rim

Less Weight

Space-Efficient Profile
4 Weighs only 6 lbs.

4 Approx. 9" profile

4 Nearly 50% lighter

4 Easy to work around

than previous
designs

4 Great for narrow bays

targets

NEW!
2011
NORTH AMERICAN
AUTOMOTIVE TOOL AND EQUIPMENT
TECHNOLOGY INNOVATION AWARD

2011

Quick-Change Arms

4 Interchangeable arms cover

up to 37" assemblies
4 One arm fits approximately 90% of applications

Deep-Wheel Extension

4 Deep rims or protruding hubs, no problem

4 Standard accessory

Wide-Angle Targets
Low Maintenance
4 Shop-tough

polymer structure
withstands drops
4 No electronics,

cables or calibration
4 Only occasional

cleaning required

4 Perform max steer procedure, as needed

4 Standard accessory

Previous setups used valuable shop time

Conventional electronic-sensor system 10-minute-plus procedure
0

4 Chock wheels

and lift vehicle

10

10:00 +

4 Jack up front and rear of vehicle

4 Check air pressure and recall specs
4 Mount all 4 sensors, compensate

each sensor, and remove pins

4 Lower rear and

front of vehicle
and jounce

4 Steer caster
4 Print results

Older technology requires long set-up times

10:05 Total

ACTIVITY TRACKER

4
6
246

Camera-sensor systems speed up the process

0

4:00
4 Chock wheels and lift vehicle
4 Check air pressure and recall specs
4 Mount targets
4 Roll backward, then forward

to compensate
4 Remove pins

Early camera technology improved efficiency

ACTIVITY TRACKER

4 Steer caster

4 Print results

4:00 Total

l83

Today, present your results in just 90 seconds!

0

1:30

Hunter's HawkEye Elite and Premium

RX Lift capture all readings and produce
measurements in 90 seconds!

Hunter's 90-second procedure

4 Chock wheels and raise lift to work height

ACTIVITY TRACKER

trip around the vehicle

trips to the console

72

total walking steps

4 Mount targets and set air pressure

4 Roll forward to compensate sensors
4 Scan VIN to recall specs and perform

enhanced caster steer

4 Vehicle results print automatically

1:30 Total

Fast printouts
in 90 seconds!
Use detailed printouts
featuring your companys
logo to sell more work.

FIA streamlines the entire alignment process.

Communication links automate tasks once performed by
the technician manually, eliminating time-consuming trips
around the vehicle and to-and-from the console.

3
4

RX Scissor Lift console

4 Raising the vehicle triggers the sensors

to look for wheel targets

4 Control PowerSlide and Inflation Station

settings on the lift console

4 Store bar-code scanner and CodeLink tool

near the vehicle to save steps

AlignLights turn on
automatically at
alignment height

WinAlign console

4 Centralized control of entire system

4 Communicate directly with lift to set

tire pressure and automatically operate

turnplates and slipplates
4 Guide the technician through the

alignment process

Measurements are taken

automatically once the
fourth target is installed

PowerSlide system

4 Slipplates and turnplates automatically

lock and unlock at appropriate times

4 No more struggles with lock pins
Auto-locking turnplates
and slipplates save trips
around the vehicle

Inflation Station
4 Automatically inflate all four tires

simultaneously
4 Record starting and final pressure
4 Hose recoils to keep work area clear

Requires FIA lift. See RX or Four-Post lift brochures for details.

Software tracks before

and after tire pressures for
the customer's printout

Use your aligner to perform an Alignment

Quick Check!
0

0:58

Use detailed printouts featuring your

companys logo to sell more work
4 Total toe front and rear
4 Camber on all wheels
4 Tire wear indication
4 Identifies vehicles that require electronic

steering system reset

Step-by-step procedure for Alignment Quick Check

1. Pull car in and stop

2. Mount QuickGrip
adaptors

5. Remove QuickGrip 6. Get printout

adaptors

3. Roll vehicle forward

4. Scan VIN

7. Out of the bay in

58 seconds

8. Sell the alignment

(when needed)

CodeLink The new last step in alignment service

CodeLink directly "links" the vehicle OBD-II

to the aligner to reset steering system sensors,
as required by the manufacturer.

Simple and efficient

4 Automatically identifies candidate vehicles
4 Incorporates reset steps into the alignment
4 Uses aligner screen to display instructions
4 Updates automatically with system

software upgrades
4 Dedicated alignment tool

One tool
replaces
multiple OEM
scan tools

l
2
3

Simplified reset instructions

replace confusing OEM
procedures

Finishes the job right

4 No other reset tool matches CodeLink's patented integration with

the alignment procedure

4 Guarantees precision with exact steering system sensor thresholds
4 Reduces errors that result in customer comebacks

Printed documentation confirms that steering

system reset was completed properly
Some of the more popular OEMs that currently require reset:

Audi BMW Chevy Ford Hyundai Infiniti Lexus Mazda Mercury

MINI Nissan Pontiac Saturn Scion Toyota Volkswagen

When it comes to award-winning software,

WinAlign is unmatched!

The importance of software

Over 30 years of experience and the largest R&D

department in the undercar industry bring you the most
profitable and productive software on the market.

Ordinary systems
simply present
alignment readings

Ordinary camera
systems simply speed
up these readings

The most extensive vehicle

information database for North
America's 220 million vehicles.

Vehicle-specific procedures
guide your technicians with
step-by-step instructions.

Patented and awardwinning power tools

complete the work accurately
the first time, every time.

WinAlign maximizes
profit and productivity
in your alignment bay.

WinAlign maximizes
profit and productivity
in your alignment bay

ExpressAlign

WinToe

Perform every alignment with a streamlined

procedure. ExpressAlign analyzes each job
and presents the optimal action sequence with
the minimum steps required.

Ensure a straight steering wheel every time

without repeated adjustments or using a steering
wheel holder.

A timesaver on nearly every alignment

Tools and Kits Database

Virtual View

Save trips back and forth to the tool box. Hunter

presents all of the tools and aftermarket correction
kits needed for each alignment.

See your alignment job in 3-D using real-time

3-D graphics. Used by experts and novices alike.

Every alignment can be shown in 3-D

Online ordering supported

Control Arm Movement Monitor

Shim-Select II

Cut adjustment times in half for front-shim, dualcam or dual-slot vehicles. Step-by-step graphics
let you get it right on the first try.

Eliminate confusing shim charts and tables. Shim

Select II quickly calculates and displays the template
you need for proper shim installation.

Over 60 million vehicles benefit

Over 30 million vehicles benefit

Wheel-Off Adjustment

Automatic Bushing Calculator

Speed the alignment process by making

adjustments with the wheel removed.*

Calculate the proper bushing size and position

adjustment without wasting time with a zero bushing.

Available when you need it

Over 10 million light trucks and vans benefit

* For three-dimensional targets, both Wheel-Off Adjustment Kit and SCA Adaptor Kit 20-2664-1 is required.

Take your alignment business to the next level!

Perform body shop alignments

Perform specialty alignments

Suspension Body Dimension Audit

Live Ride Height Adjustment *

Quickly screen vehicles to determine

alignability and collision repair needs.

Measure and adjust ride height in real-time.

Symmetry Angle Measurements

WinAlign Tuner*

Instantly access symmetry angles and setback

for your body shop customers.

Perform alignments on tuned suspensions and

other modified vehicles with tools to monitor tire
wear and handling.

Fast printouts to
share with customers
Customize Hunter's
detailed printouts to
help explain service
needs to customers or
to document repairs.
*Standard with WA400 consoles, optional with WA300 consoles.

Over 20 million vehicles require ride height

measurement to complete alignment service

Help your customers make informed decisions!

WinAlign Video Library*

Point & Click Inspection Photos*

400+ videos and animations cover all aspects

of wheel alignment today.

5,000+ vehicle-specific photos and illustrations

to assist your shop.

4 Educate your customers

4 
Show your customers their hidden

4 Find answers to unusual problems

4 Extend your service and profit opportunities
4 Strengthen technician competency

repair needs
4 
Guide your technicians to the proper

inspection points
4 
Extend your service and profit opportunities

The latest specs available online

WinAlign printouts help sell work

Download, access and communicate alignment

service information through the Internet.

Explain needed parts and repairs and show

completed work to customers using detailed,
color-coded printouts.

4 WebSpecs .NET specification database

4 ShopResults.NET online service*

4 UnderCarInfo.NET subscription*

Clear and detailed printouts help you

communicate and build rapport with your
customers and sell more alignments

* Standard with WA400 consoles, optional with WA300 consoles.

Two-year free subscription for WebSpecs.NET, one-year free subscription for ShopResults.NET and UnderCarInfo.NET.

TPMSpecs brings concise TPMS

information to your business!

TPMSpecs pulls together over 100 TPMS

procedures into a simple, yet comprehensive,
user-friendly format for the technician.

Hunter TPMSpecs available at check in too!

Present TPMS info to your customers through

any internet-connected shop computer!

Additional features enhance alignment service!

Adjustable Clamp Arms

OPTIONAL

One set of adjustable arms covers the same

clamping range as standard multi-arm kit.

Drive-on camera
Safely and easily position a vehicle on a lift with
one technician. WinAlign software supports the use
of a drive-on camera, which uses the aligner screen
as a guide. (Drive-on camera sold separately.)

Choose the right alignment console for your shop!

WinAlign WA400
Premium consoles
Processor

3.06 GHz Intel Core i3

Memory (DDR2)

4 GB of DDR3 SDRAM

Industry-leading hardware

Hard drive
DVD-RW/CD-RW drive
Monitor class
Wireless network module
Operating system
Three-dimensional target (TD Target ) support

250.0 GB SATA hard drive (or greater)

Standard
24" or 27" widescreen LCD
(32" available on large console)
Standard
Windows 7

Standard

Vehicle specifications (30 plus years)

Standard (2 years free updates)

Large console with drawers

Standard (with WA44X consoles)

Compact console with printer drawer

Standard (with WA43X consoles)

Console-top storage and charging station

Standard

Real-time specs delivered by web

WebSpecs (2 years standard)

Steering system reset (integrated)

Yes (with standard CodeLink )

Bar code reader

Standard

Complete TPMS reset database

Standard

Live Ride Height adjustment

Standard

Fully Integrated Alignment

Yes (FIA-equipped lift required)

Modified vehicle alignment

Yes (with standard WinAlign Tuner)

Vehicle inspection with photos

Standard

Tools & Kits basic catalog

Standard

Tools & Kits video and photos

Standard

Equipment video help/assistance

Standard

ShopResults (via ShopResults.NET )

1 year standard

UnderCarInfo (via UnderCarInfo.NET)

1 year standard

Training and productivity aids

Large
console

Standard (with mobile WA400 consoles)

Award-winning WinAlign software

Award-winning productivity tools

4,000+ photos, 1,600+ illustrations

400+ videos & animations

Remote Indicator sold separately. For product dimensions, weights and site requirements, please contact your local Hunter Sales Representative.

Compact
console

Wall-mount
console

NEW!

Choose the right sensor package for your shop!

Fixed-column configurations fit most service

bay applications.

Motorized and manual movable-camera

configurations provide a full range of vertical
travel for additional lift height.

Cabinet-mounted configuration is mobile

to service multiple alignment bays and provides
a full range of travel for additional lift height.

Wall- and ceiling-mount configurations are

perfect when space is at a premium.

Floor-mounted overhead configurations are

ideal for drive-through bays or to accommodate
unique applications.

HawkEye Elite sensors (HE421) come equipped

with QuickGrip adaptors and three-dimensional
targets.

HawkEye Elite alignment sensor and adaptor

specifications

Specifications

No metal-to-metal contact with wheel

Weight of assembly

6 lbs.

Profile of assembly

9 inches

Installation time per wheel

5 seconds

Rolling compensation style

Forward

Camera resolution

Secondary Measurements
Body
Measurements
Adjustments

2,608 x 1,952 (pixels per camera)

20,000,000 (pixels total)

Track width

80 inches

Wheelbase

210 inches

Distance to wall*

* Refer to site requirements for exact bay specifications.

Standard

66 - 107 inches

Suggested distance*

99 inches

Short-bay distance (see site info)*

66 inches

S.A.I. and included angle

Setback

Maximum steering angle**

To lock

Live ride height***

Wheelbase difference

Track width difference

Tread width difference

Lateral offset

Rear setback

Axle offset

SBDA

Body angle

Body wheel offset & setback

Body roll**

Way Up Way Out WinToe**

Wheel-Off Adjustment (WinAlign 9 & up)

Optional

** Requires standard wide-angle target extensions.

*** Requires Ride Height targets. Standard with WA400 consoles, optional with WA300 consoles.

Increase revenue with Hunter merchandising!

Introduce your wheel
alignment capabilities and
educate your customers with
great Point-of-Sale options
from Hunter.

Sell more
alignments
with clear and
informative
printouts

Be sure to check out other Hunter literature for more

quality products from Hunter Engineering.

Customized
column cap
Make your
alignment bay
stand out. Hunter's
lighted sensor
column cap can be
customized with
your logo or shop name.
(available for most sensor
configurations)

w w w. h u n t e r. c o m

0412FAP10M.75

Copyright 2012 Hunter Engineering Company

Form 6230-T, 04/12

Supersedes Form 6230-T, 11/11