Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    32sPACE WAGON

    Uploaded by

    rafaelcruzgja
    This document provides information on mounting various components of a vehicle's power plant, including: - The engine is mounted at the front and upper part and the transmission is mounted at the rear and upper part, connected by an inertial axis supporting mount that suppresses engine vibration. - Details are given on removing and installing the engine mount, transmission mount, frontmember, front and rear roll stoppers, including torque specifications and installation points. - The frontmember supports the front of the power plant assembly and instructions cover its removal and installation along with related components like the steering gear and stabilizer bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    32sPACE WAGON

    Uploaded by

    rafaelcruzgja
    31 views8 pages
    This document provides information on mounting various components of a vehicle's power plant, including: - The engine is mounted at the front and upper part and the transmission is mounted at the rear and upper part, connected by an inertial axis supporting mount that suppresses engine vibration. - Details are given on removing and installing the engine mount, transmission mount, frontmember, front and rear roll stoppers, including torque specifications and installation points. - The frontmember supports the front of the power plant assembly and instructions cover its removal and installation along with related components like the steering gear and stabilizer bar.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on mounting various components of a vehicle's power plant, including: - The engine is mounted at the front and upper part and the transmission is mounted at the rear and upper part, connected by an inertial axis supporting mount that suppresses engine vibration. - Details are given on removing and installing the engine mount, transmission mount, frontmember, front and rear roll stoppers, including torque specifications and installation points. - The frontmember supports the front of the power plant assembly and instructions cover its removal and installation along with related components like the steering gear and stabilizer bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views8 pages

    32sPACE WAGON

    Uploaded by

    rafaelcruzgja
    This document provides information on mounting various components of a vehicle's power plant, including: - The engine is mounted at the front and upper part and the transmission is mounted at the rear and upper part, connected by an inertial axis supporting mount that suppresses engine vibration. - Details are given on removing and installing the engine mount, transmission mount, frontmember, front and rear roll stoppers, including torque specifications and installation points. - The frontmember supports the front of the power plant assembly and instructions cover its removal and installation along with related components like the steering gear and stabilizer bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    32-1

    POWER PLANT
    MOUNT
    CONTENTS

    32109000165

    GENERAL INFORMATION . . . . . . . . . . . . . . . . . . 2

    FRONTMEMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

    ENGINE MOUNTING . . . . . . . . . . . . . . . . . . . . . . . 3

    ROLL STOPPER . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

    TRANSMISSION MOUNTING . . . . . . . . . . . . . . . . 4

    32-2

    POWER PLANT MOUNT - General Information

    GENERAL INFORMATION

    32100010150

    The engine-transmission mount is of an inertial axis


    supporting type whose excellent features have
    already been proven in many Mitsubishi vehicles.
    The inertial axis supporting type mount supports

    the front upper part of the engine at the front and


    the rear upper part of the transmission at the rear.
    This arrangement effectively suppresses the engine
    vibration.

    Dynamic damper
    Engine mount

    Frontmember
    Front
    Rear roll stopper
    Front roll stopper

    Transmission mount
    Dynamic damper
    Engine mount
    Transmission mount

    Front

    Front roll stopper

    Frontmember

    Rear roll stopper

    POWER PLANT MOUNT - Engine Mounting

    ENGINE MOUNTING

    32-3
    32100110263

    REMOVAL AND INSTALLATION


    Caution
    Provisionally tighten the parts marked by an asterisk (*), and then fully tighten after loading the
    full weight of the engine on the vehicle body.
    Pre-removal and Post-installation Operation
    D Engine Cover Removal and Installation
    D Jack Up the Engine and Transmission Assembly
    until Weight is off the Insulator.

    67 Nm
    5 Nm

    57 Nm

    3
    12 Nm

    1
    2

    88 - 108 Nm*

    Removal steps
    1. Oil reserver
    2. Engine mount insulator mounting
    bolt

    Engine
    side
    Arrow

    Engine
    mount
    stopper
    Engine mount bracket

    3. Engine mount bracket


    "AA 4. Engine mount stopper
    5. Dynamic damper

    INSTALLATION SERVICE POINT


    "AA ENGINE MOUNT STOPPER INSTALLATION
    Install the engine mount stopper so that the arrow faces the
    direction shown.

    32-4

    POWER PLANT MOUNT - Transmission Mounting

    TRANSMISSION MOUNTING

    32100140170

    REMOVAL AND INSTALLATION


    Caution
    Provisionally tighten the parts marked by an asterisk (*), and then fully tighten after loading the
    full weight of the engine on the vehicle body.
    Pre-removal and Post-installation Operation
    D Air Cleaner Assembly Removal and Installation
    (Refer to GROUP 15)
    D Frontmember Removal and Installation
    (Refer to P.32-5.)

    81 Nm*

    57 Nm

    2
    1
    2

    AA"

    Removal steps
    1. Transmission mount bracket
    "AA 2. Transmission mount stoppers

    REMOVAL SERVICE POINT


    AA" TRANSMISSION MOUNT BRACKET REMOVAL
    1. Support the engine and transmission assembly with a
    garage jack.
    2. Remove the transmission mount bracket mounting bolts
    and nuts.
    3. After lowering the engine and transmission assembly,
    remove the transmission mount bracket.

    POWER PLANT MOUNT - Transmission Mounting/Frontmember

    32-5

    INSTALLATION SERVICE POINT

    Engine side

    "AA TRANSMISSION MOUNT STOPPER INSTALLATION


    Install the transmission mount stopper so that the arrow faces
    the direction shown.
    Transmission
    mount
    bracket

    Transmission
    mount stopper

    NOTE
    Disregard F and R stamped as a shared part.

    FRONTMEMBER
    REMOVAL AND INSTALLATION
    Caution
    1. Before removing the steering gear box, refer to GROUP 52B SRS Air Bag. Set the front wheels
    straightforward, and then remove the ignition key; otherwise the SRS clock spring will be
    damaged. This makes the SRS air bag inoperative and will invite serious driver injury.
    2. Provisionally tighten the parts marked by an asterisk (*), and then fully tighten after loading
    the full weight of the engine on the vehicle body.
    Pre-removal and Post-installation Operations
    D Under Cover Removal and Installation
    D Side Cover Mounting Clip on Frontmember Side
    Removal and Installation
    D Push Dust Cover to Check that Cracks or Damage
    are not present (After Installation Only)

    D
    D

    Front Exhaust Pipe Removal and Installation (Refer


    to GROUP 15.)
    Transfer Assembly Removal and Installation <4WD>
    (Refer to GROUP 22 <M/T> or 23 <A/T>.)

    32-6

    POWER PLANT MOUNT - Frontmember

    39 Nm

    3
    2

    12 Nm

    39 Nm

    69 Nm

    12
    44 Nm*

    98 - 118 Nm
    13 Nm

    57 Nm*

    98 - 118 Nm*

    11

    10

    10

    14

    88 - 108 Nm

    13
    16
    5

    177 Nm

    8
    88 - 108 Nm*
    57 Nm*

    78 Nm
    177 Nm

    15
    Frontmember removal steps
    1. Steering gear and linkage mounting
    bolt
    2. Oil line mounting bolt
    3. Stabilizer link connection
    4. Stay
    "BA 5. Lower arm assembly connection
    6. Front roll stopper connecting bolt
    7. Rear roll stopper connecting bolt
    AB"
    8. Frontmember mounting bolt

    AA"

    9.
    10.
    11.
    "AA 12.
    13.
    14.
    15.
    16.

    Lower stopper
    Upper stopper
    Front hanger
    Stabilizer bar
    Lower arm assembly
    Front roll stopper
    Rear roll stopper
    Frontmember

    POWER PLANT MOUNT - Frontmember

    32-7

    REMOVAL SERVICE POINT


    AA" STEERING GEAR AND LINKAGE MOUNTING
    BOLT REMOVAL
    Use a wire to fix the steering gear box on the vehicle before
    removing the steering gear and linkage mounting bolts.

    AB" FRONTMEMBER MOUNTING BOLT REMOVAL


    1. Use a wire to fix the radiator on the vehicle before removing
    the frontmember.
    2. Support the frontmember with a garage jack and a wooden
    board, and remove the frontmember mounting bolts.

    Wooden
    board

    Transmission jack

    INSTALLATION SERVICE POINT

    Front of vehicle

    "AA STABILIZER BAR INSTALLATION


    1. Install the bushing so that its cutting faces the direction
    shown.
    2. Place the stabilizer bar identification mark at the left of
    the vehicle and position it as shown in the illustration.
    Tighten the stabilizer bar bracket mounting bolts.

    Approx. 20 mm

    Bushing

    "BA LOWER ARM ASSEMBLY INSTALLATION


    1. Install the lower arm assembly to the knuckle.

    Knuckle

    A
    Lower arm
    assembly

    Caution
    Be careful that the ball joint stud does not project
    more than 4 mm from the knuckle (A shown).
    2. Replace the dust cover if grease spouted out due to
    the knuckle too much pressed in.
    3. Check that no clearance is present between the knuckle
    and dust cover.

    32-8

    POWER PLANT MOUNT - Roll Stopper

    ROLL STOPPER

    32100140170

    Caution
    Provisionally tighten the parts marked by an asterisk (*), and then fully tighten after loading the
    full weight of the engine on the vehicle body.

    44 Nm*

    57 Nm*

    4
    57 Nm*

    3
    2

    Front roll stopper removal steps


    D Radiator (Refer to GROUP 14)
    1. Front roll stopper connecting bolt
    2. Front roll stopper

    98 - 118
    Nm*

    Rear roll stopper removal steps


    3. Rear roll stopper connecting bolt
    4. Rear roll stopper

    You might also like